All of lore.kernel.org
 help / color / mirror / Atom feed
* Unexpected IO-APIC on Gigabyte GA-7VTXH and kernel 2.4.20rc1
@ 2002-11-14 23:07 Ruediger Otte
  0 siblings, 0 replies; only message in thread
From: Ruediger Otte @ 2002-11-14 23:07 UTC (permalink / raw)
  To: linux-smp

[-- Attachment #1: Type: TEXT/plain, Size: 271 bytes --]

Hi,

I'm using a Gigabyte GA-7VTXH Board with the Athlon XP Processor and
linux kernel 2.4.20rc1. I get this message during boot:

WARNING: unexpected IO-APIC, please mail
         to linux-smp@vger.kernel.org

So, here I am.

dmesg is attached.

-- 
Rüdiger

[-- Attachment #2: dmesg-ga7vtxh --]
[-- Type: TEXT/plain, Size: 14318 bytes --]

Linux version 2.4.20-rc1 (root@marcos) (gcc version 2.95.4 20011002 (Debian prerelease)) #2 Don Nov 7 18:36:03 CET 2002
BIOS-provided physical RAM map:
 BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
 BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
 BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
 BIOS-e820: 0000000000100000 - 000000000fff0000 (usable)
 BIOS-e820: 000000000fff0000 - 000000000fff8000 (ACPI data)
 BIOS-e820: 000000000fff8000 - 0000000010000000 (ACPI NVS)
 BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
 BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
 BIOS-e820: 00000000fffc0000 - 0000000100000000 (reserved)
255MB LOWMEM available.
ACPI: have wakeup address 0xc0001000
found SMP MP-table at 000fb9e0
hm, page 000fb000 reserved twice.
hm, page 000fc000 reserved twice.
hm, page 000f6000 reserved twice.
hm, page 000f7000 reserved twice.
On node 0 totalpages: 65520
zone(0): 4096 pages.
zone(1): 61424 pages.
zone(2): 0 pages.
ACPI: RSDP (v000 AMI                        ) @ 0x000fa7b0
ACPI: RSDT (v001 AMIINT AMIINI09 00000.00016) @ 0x0fff0000
ACPI: FADT (v001 AMIINT AMIINI09 00000.00017) @ 0x0fff0030
ACPI: MADT (v001 AMIINT AMIINI09 00000.00017) @ 0x0fff00c0
ACPI: DSDT (v001    VIA   VIA_K7 00000.04096) @ 0x00000000
ACPI: BIOS passes blacklist
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
Processor #0 Pentium(tm) Pro APIC version 16
ACPI: IOAPIC (id[0x02] address[0xfec00000] global_irq_base[0x0])
IOAPIC[0]: Assigned apic_id 2
IOAPIC[0]: apic_id 2, version 2, address 0xfec00000, IRQ 0-23
ACPI: INT_SRC_OVR (bus[0] irq[0x0] global_irq[0x2] polarity[0x0] trigger[0x0])
ACPI: INT_SRC_OVR (bus[0] irq[0x9] global_irq[0x9] polarity[0x3] trigger[0x3])
Using ACPI (MADT) for SMP configuration information
Kernel command line: BOOT_IMAGE=GNU/Test ro root=307 reboot=warm hdc=4865,255,63
ide_setup: hdc=4865,255,63
Initializing CPU#0
Detected 1405.973 MHz processor.
Console: colour VGA+ 80x30
Calibrating delay loop... 2804.94 BogoMIPS
Memory: 256956k/262080k available (1073k kernel code, 4736k reserved, 297k data, 256k init, 0k highmem)
Dentry cache hash table entries: 32768 (order: 6, 262144 bytes)
Inode cache hash table entries: 16384 (order: 5, 131072 bytes)
Mount-cache hash table entries: 4096 (order: 3, 32768 bytes)
Buffer-cache hash table entries: 16384 (order: 4, 65536 bytes)
Page-cache hash table entries: 65536 (order: 6, 262144 bytes)
CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
CPU: L2 Cache: 256K (64 bytes/line)
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#0.
CPU:     After generic, caps: 0383fbff c1c3fbff 00000000 00000000
CPU:             Common caps: 0383fbff c1c3fbff 00000000 00000000
CPU: AMD Athlon(tm) XP 1600+ stepping 02
Enabling fast FPU save and restore... done.
Enabling unmasked SIMD FPU exception support... done.
Checking 'hlt' instruction... OK.
POSIX conformance testing by UNIFIX
enabled ExtINT on CPU#0
ESR value before enabling vector: 00000080
ESR value after enabling vector: 00000000
ENABLING IO-APIC IRQs
init IO_APIC IRQs
 IO-APIC (apicid-pin) 2-0, 2-16, 2-17, 2-18, 2-19, 2-20, 2-21, 2-22, 2-23 not connected.
..TIMER: vector=0x31 pin1=2 pin2=0
number of MP IRQ sources: 16.
number of IO-APIC #2 registers: 24.
testing the IO APIC.......................

IO APIC #2......
.... register #00: 02000000
.......    : physical APIC id: 02
.... register #01: 00178002
.......     : max redirection entries: 0017
.......     : PRQ implemented: 1
.......     : IO APIC version: 0002
 WARNING: unexpected IO-APIC, please mail
          to linux-smp@vger.kernel.org
.... IRQ redirection table:
 NR Log Phy Mask Trig IRR Pol Stat Dest Deli Vect:   
 00 000 00  1    0    0   0   0    0    0    00
 01 001 01  0    0    0   0   0    1    1    39
 02 001 01  0    0    0   0   0    1    1    31
 03 001 01  0    0    0   0   0    1    1    41
 04 001 01  0    0    0   0   0    1    1    49
 05 001 01  0    0    0   0   0    1    1    51
 06 001 01  0    0    0   0   0    1    1    59
 07 001 01  0    0    0   0   0    1    1    61
 08 001 01  0    0    0   0   0    1    1    69
 09 001 01  1    1    0   1   0    1    1    71
 0a 001 01  0    0    0   0   0    1    1    79
 0b 001 01  0    0    0   0   0    1    1    81
 0c 001 01  0    0    0   0   0    1    1    89
 0d 001 01  0    0    0   0   0    1    1    91
 0e 001 01  0    0    0   0   0    1    1    99
 0f 001 01  0    0    0   0   0    1    1    A1
 10 000 00  1    0    0   0   0    0    0    00
 11 000 00  1    0    0   0   0    0    0    00
 12 000 00  1    0    0   0   0    0    0    00
 13 000 00  1    0    0   0   0    0    0    00
 14 000 00  1    0    0   0   0    0    0    00
 15 000 00  1    0    0   0   0    0    0    00
 16 000 00  1    0    0   0   0    0    0    00
 17 000 00  1    0    0   0   0    0    0    00
IRQ to pin mappings:
IRQ0 -> 0:2
IRQ1 -> 0:1
IRQ3 -> 0:3
IRQ4 -> 0:4
IRQ5 -> 0:5
IRQ6 -> 0:6
IRQ7 -> 0:7
IRQ8 -> 0:8
IRQ9 -> 0:9
IRQ10 -> 0:10
IRQ11 -> 0:11
IRQ12 -> 0:12
IRQ13 -> 0:13
IRQ14 -> 0:14
IRQ15 -> 0:15
.................................... done.
Using local APIC timer interrupts.
calibrating APIC timer ...
..... CPU clock speed is 1406.0730 MHz.
..... host bus clock speed is 267.8233 MHz.
cpu: 0, clocks: 2678233, slice: 1339116
CPU0<T0:2678224,T1:1339104,D:4,S:1339116,C:2678233>
mtrr: v1.40 (20010327) Richard Gooch (rgooch@atnf.csiro.au)
mtrr: detected mtrr type: Intel
ACPI: Subsystem revision 20021101
PCI: Using configuration type 1
    ACPI-0508: *** Info: GPE Block0 defined as GPE0 to GPE15
ACPI: Interpreter enabled
ACPI: Using IOAPIC for interrupt routing
ACPI: System [ACPI] (supports S0 S3 S4 S5)
ACPI: PCI Root Bridge [PCI0] (00:00)
PCI: Probing PCI hardware (bus 00)
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: Power Resource [URP1] (off)
ACPI: Power Resource [URP2] (off)
ACPI: Power Resource [FDDP] (off)
ACPI: Power Resource [LPTP] (off)
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 *10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 *5 6 7 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 *5 6 7 10 11 12 14 15)
PCI: Probing PCI hardware
IOAPIC[0]: Set PCI routing entry (2-16 -> 0xa9 -> IRQ 16)
00:00:01[A] -> 2-16 -> IRQ 16
IOAPIC[0]: Set PCI routing entry (2-17 -> 0xb1 -> IRQ 17)
00:00:01[B] -> 2-17 -> IRQ 17
IOAPIC[0]: Set PCI routing entry (2-18 -> 0xb9 -> IRQ 18)
00:00:11[C] -> 2-18 -> IRQ 18
IOAPIC[0]: Set PCI routing entry (2-5 -> 0x51 -> IRQ 5)
00:00:11[D] -> 2-5 -> IRQ 5
Pin 2-17 already programmed
Pin 2-18 already programmed
IOAPIC[0]: Set PCI routing entry (2-19 -> 0xc1 -> IRQ 19)
00:00:09[C] -> 2-19 -> IRQ 19
Pin 2-16 already programmed
Pin 2-18 already programmed
Pin 2-19 already programmed
Pin 2-16 already programmed
Pin 2-17 already programmed
Pin 2-19 already programmed
Pin 2-16 already programmed
Pin 2-17 already programmed
Pin 2-18 already programmed
Pin 2-16 already programmed
Pin 2-17 already programmed
Pin 2-18 already programmed
Pin 2-19 already programmed
Pin 2-17 already programmed
Pin 2-18 already programmed
Pin 2-19 already programmed
Pin 2-16 already programmed
Pin 2-17 already programmed
Pin 2-18 already programmed
Pin 2-16 already programmed
Pin 2-17 already programmed
Pin 2-18 already programmed
Pin 2-19 already programmed
Pin 2-16 already programmed
Pin 2-17 already programmed
Pin 2-18 already programmed
Pin 2-19 already programmed
PCI: No IRQ known for interrupt pin A of device 00:11.1 - using IRQ 255
PCI: Using ACPI for IRQ routing
PCI: if you experience problems, try using option 'pci=noacpi' or even 'acpi=off'
Linux NET4.0 for Linux 2.4
Based upon Swansea University Computer Society NET3.039
Initializing RT netlink socket
Starting kswapd
VFS: Diskquotas version dquot_6.4.0 initialized
Journalled Block Device driver loaded
ACPI: Power Button (FF) [PWRF]
ACPI: Processor [CPU1] (supports C1, 16 throttling states)
pty: 256 Unix98 ptys configured
Serial driver version 5.05c (2001-07-08) with MANY_PORTS SHARE_IRQ SERIAL_PCI enabled
ttyS00 at 0x03f8 (irq = 4) is a 16550A
ttyS01 at 0x02f8 (irq = 3) is a 16550A
Real Time Clock Driver v1.10e
Uniform Multi-Platform E-IDE driver Revision: 6.31
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
VP_IDE: IDE controller on PCI bus 00 dev 89
PCI: No IRQ known for interrupt pin A of device 00:11.1 - using IRQ 255
VP_IDE: chipset revision 6
VP_IDE: not 100%% native mode: will probe irqs later
VP_IDE: VIA vt8233 (rev 00) IDE UDMA100 controller on pci00:11.1
    ide0: BM-DMA at 0xfc00-0xfc07, BIOS settings: hda:DMA, hdb:DMA
    ide1: BM-DMA at 0xfc08-0xfc0f, BIOS settings: hdc:DMA, hdd:pio
hda: ST38410A, ATA DISK drive
hdb: ST38410A, ATA DISK drive
hdc: ST340810A, ATA DISK drive
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
ide1 at 0x170-0x177,0x376 on irq 15
blk: queue c02c6564, I/O limit 4095Mb (mask 0xffffffff)
hda: 16841664 sectors (8623 MB) w/512KiB Cache, CHS=1048/255/63, UDMA(33)
blk: queue c02c66b0, I/O limit 4095Mb (mask 0xffffffff)
hdb: 16841664 sectors (8623 MB) w/512KiB Cache, CHS=1048/255/63, UDMA(33)
blk: queue c02c68c8, I/O limit 4095Mb (mask 0xffffffff)
hdc: 78165360 sectors (40021 MB) w/2048KiB Cache, CHS=4865/255/63, UDMA(100)
Partition check:
 hda: hda1 hda2 < hda5 hda6 hda7 hda8 >
 hdb: hdb1 hdb2 < hdb5 hdb6 hdb7 hdb8 hdb9 >
 hdc: hdc1 hdc2 < hdc5 hdc6 hdc7 hdc8 hdc9 hdc10 hdc11 >
LVM version 1.0.5+(22/07/2002)
NET4: Linux TCP/IP 1.0 for NET4.0
IP Protocols: ICMP, UDP, TCP, IGMP
IP: routing cache hash table of 2048 buckets, 16Kbytes
TCP: Hash tables configured (established 16384 bind 16384)
NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
kjournald starting.  Commit interval 5 seconds
EXT3-fs: mounted filesystem with ordered data mode.
VFS: Mounted root (ext3 filesystem) readonly.
Freeing unused kernel memory: 256k freed
Adding Swap: 136512k swap-space (priority 0)
Adding Swap: 128484k swap-space (priority 0)
EXT3 FS 2.4-0.9.19, 19 August 2002 on ide0(3,7), internal journal
es1371: version v0.30 time 18:39:26 Nov  7 2002
es1371: found chip, vendor id 0x1274 device id 0x5880 revision 0x04
es1371: found es1371 rev 4 at io 0xe400 irq 17
es1371: features: joystick 0x200
ac97_codec: AC97 Audio codec, id: ������v8(SigmaTel STAC9708)
ne2k-pci.c:v1.02 10/19/2000 D. Becker/P. Gortmaker
  http://www.scyld.com/network/ne2k-pci.html
eth0: RealTek RTL-8029 found at 0xec00, IRQ 16, 00:00:B4:5E:46:93.
8139too Fast Ethernet driver 0.9.26
eth1: RealTek RTL8139 Fast Ethernet at 0xd0849e00, 00:20:ed:1f:7c:60, IRQ 18
eth1:  Identified 8139 chip type 'RTL-8139B'
kjournald starting.  Commit interval 5 seconds
EXT3 FS 2.4-0.9.19, 19 August 2002 on ide0(3,5), internal journal
EXT3-fs: mounted filesystem with ordered data mode.
kjournald starting.  Commit interval 5 seconds
EXT3 FS 2.4-0.9.19, 19 August 2002 on ide1(22,5), internal journal
EXT3-fs: mounted filesystem with ordered data mode.
kjournald starting.  Commit interval 5 seconds
EXT3 FS 2.4-0.9.19, 19 August 2002 on ide1(22,6), internal journal
EXT3-fs: mounted filesystem with ordered data mode.
kjournald starting.  Commit interval 5 seconds
EXT3 FS 2.4-0.9.19, 19 August 2002 on ide1(22,8), internal journal
EXT3-fs: mounted filesystem with ordered data mode.
loop: loaded (max 8 devices)
reiserfs: checking transaction log (device 07:00) ...
Using r5 hash to sort names
ReiserFS version 3.6.25
kjournald starting.  Commit interval 5 seconds
EXT3 FS 2.4-0.9.19, 19 August 2002 on ide1(22,9), internal journal
EXT3-fs: mounted filesystem with ordered data mode.
kjournald starting.  Commit interval 5 seconds
EXT3 FS 2.4-0.9.19, 19 August 2002 on ide1(22,10), internal journal
EXT3-fs: mounted filesystem with ordered data mode.
kjournald starting.  Commit interval 5 seconds
EXT3 FS 2.4-0.9.19, 19 August 2002 on ide1(22,11), internal journal
EXT3-fs: mounted filesystem with ordered data mode.
eth1: Setting half-duplex based on auto-negotiated partner ability 0000.
ip_tables: (C) 2000-2002 Netfilter core team
parport0: PC-style at 0x378 (0x778) [PCSPP,TRISTATE]
parport0: irq 7 detected
lp0: using parport0 (polling).
i2c-core.o: i2c core module
i2c-viapro.o version 2.6.4 (20020719)
i2c-viapro.o: Found Via VT8233 device
i2c-core.o: adapter SMBus Via Pro adapter at 0400 registered as adapter 0.
i2c-viapro.o: Via Pro SMBus detected and initialized
i2c-isa.o version 2.6.4 (20020719)
i2c-core.o: adapter ISA main adapter registered as adapter 1.
i2c-isa.o: ISA bus access for i2c modules initialized.
i2c-proc.o version 2.6.1 (20010825)
it87.o version 2.6.4 (20020719)
i2c-core.o: driver IT87xx sensor driver registered.
i2c-core.o: client [IT87 chip] registered to adapter [ISA main adapter](pos. 0).
i2c-algo-bit.o: i2c bit algorithm module
i2c-voodoo3.o version 2.6.4 (20020719)
i2c-voodoo3: Using Banshee/Voodoo3 at 0xd095b000
i2c-voodoo3: 1 Banshee/Voodoo3 found.
i2c-core.o: adapter I2C Voodoo3/Banshee adapter registered as adapter 2.
i2c-voodoo3.o: I2C bus initialized
i2c-core.o: adapter DDC Voodoo3/Banshee adapter registered as adapter 3.
i2c-voodoo3.o: DDC bus initialized
bt869.o version 2.6.4 (20020719)
i2c-core.o: driver BT869 video-output chip driver registered.
bt869.o:  probing address 68 .
bt869.o: address 0x44 testing-->0x22
bt869.o: BT869 detected
i2c-core.o: client [bt869 chip] registered to adapter [I2C Voodoo3/Banshee adapter](pos. 0).
bt869.o: write_value(0xBA, 0x80)
bt869.o: write_value(0xA0, 0x80)
bt869.o: write_value(0xBA, 0x20)
bt869.o: write_value(0xC6, 0x1)
bt869.o: write_value(0xC4, 0x1)
bt869.o: write_value(0xC8, 0x0)
SCSI subsystem driver Revision: 1.00
ncr53c8xx: at PCI bus 0, device 13, function 0
ncr53c8xx: 53c810 detected 
ncr53c810-0: rev 0x2 on pci bus 0 device 13 function 0 irq 17
ncr53c810-0: ID 7, Fast-10, Parity Checking
scsi0 : ncr53c8xx-3.4.3b-20010512
[drm] Initialized tdfx 1.0.0 20010216 on minor 0
  Vendor: PLEXTOR   Model: CD-ROM PX-20TS    Rev: 1.02
  Type:   CD-ROM                             ANSI SCSI revision: 02
  Vendor: IOMEGA    Model: ZIP 100           Rev: J.03
  Type:   Direct-Access                      ANSI SCSI revision: 02
Attached scsi removable disk sda at scsi0, channel 0, id 6, lun 0
ncr53c810-0-<6,*>: target did not report SYNC.

^ permalink raw reply	[flat|nested] only message in thread

only message in thread, other threads:[~2002-11-14 23:07 UTC | newest]

Thread overview: (only message) (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2002-11-14 23:07 Unexpected IO-APIC on Gigabyte GA-7VTXH and kernel 2.4.20rc1 Ruediger Otte

This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.