* 2.5 problem with SMC2632W adapter
@ 2002-11-27 2:06 Thomas Molina
2002-11-27 2:22 ` Larry McVoy
0 siblings, 1 reply; 2+ messages in thread
From: Thomas Molina @ 2002-11-27 2:06 UTC (permalink / raw)
To: linux-kernel; +Cc: alan
I've previously written about my problems getting the above wireless
PCMCIA network card working with 2.5. Since Alan seems to have added some
network and cardbus changes I tried 2.5.49-ac2. I'm getting the same
symptoms. Thus far, in addition to 2.5.49-ac2 I've tried 2.5.49 (latest
bk), 2.5.48, 2.5.47, 2.4.18-18.8.0 (RedHat), and 2.4.19.
Briefly summarizing my previous message, my system is a Presario 12XL325
laptop with a PIII-650 cpu. I'm running RedHat 8.0 on this system with
addition of mod-init tools v 0.7. On 2.4.18 and 2.4.19, inserting the
wireless card generates an event which configures the card and establishes
a network connection. None of the 2.5 kernels seems to generates an
event. The later ones I understand, but wasn't 47 before the module
changes?
I've provided what I believe to be relevant information; I'm willing to
provide additional info and do testing. I haven't seen anyone else
complain. Maybe I'm doing something wrong and someone can give me a clue.
If I manually insert the modules, I get the dmesg output (this is the
same output for all the versions):
Linux Kernel Card Services 3.1.22
options: [pci] [cardbus] [pm]
PCI: Assigned IRQ 9 for device 00:0a.0
Yenta IRQ list 0018, PCI irq9
Socket status: 30000010
cs: IO port probe 0x0c00-0x0cff: clean.
cs: IO port probe 0x0100-0x04ff: excluding 0x200-0x207 0x220-0x22f
0x378-0x37f 0x388-0x38f 0x4d0-0x4d7
cs: IO port probe 0x0a00-0x0aff: clean.
cs: memory probe 0xa0000000-0xa0ffffff: clean.
hermes.c: 5 Apr 2002 David Gibson <hermes@gibson.dropbear.id.au>
orinoco.c 0.11b (David Gibson <hermes@gibson.dropbear.id.au> and others)
orinoco_cs.c 0.11b (David Gibson <hermes@gibson.dropbear.id.au> and
others)
For the 2.4 kernels I get the following additional output:
divert: allocating divert_blk for eth0
eth0: Station identity 001f:0003:0000:0008
eth0: Looks like an Intersil firmware version 0.08
eth0: Ad-hoc demo mode supported
eth0: IEEE standard IBSS ad-hoc mode supported
eth0: WEP supported, 104-bit key
eth0: MAC address 00:04:E2:2A:29:58
eth0: Station name "Prism I"
eth0: ready
eth0: index 0x01: Vcc 5.0, irq 3, io 0x0100-0x013f
and dhclient sets up the routing. If I build the 2.5 kernels as
monolithic, I get the additional output in /var/log/messages:
lap kernel: orinoco_cs: RequestIRQ: Resource in use
lap cardmgr[423]: get dev info on socket 0 failed:
Resource temporarily unavailable
and eth0 is not set up and dhclient obviously won't set up the routing.
lsmod output for an operational set up is:
Module Size Used by Not tainted
autofs 11940 0 (autoclean) (unused)
orinoco_cs 5352 1
orinoco 32824 0 [orinoco_cs]
hermes 7204 0 [orinoco_cs orinoco]
ds 7944 1 [orinoco_cs]
yenta_socket 11616 1
pcmcia_core 48640 0 [orinoco_cs ds yenta_socket]
iptable_filter 2284 0 (autoclean) (unused)
ip_tables 13592 1 [iptable_filter]
mousedev 5076 0 (unused)
keybdev 2688 0 (unused)
hid 20132 0 (unused)
input 5504 0 [mousedev keybdev hid]
usb-uhci 23564 0 (unused)
usbcore 69664 1 [hid usb-uhci]
ext3 61440 1
jbd 46932 1 [ext3]
lspci is:
00:00.0 Host bridge: VIA Technologies, Inc. VT8601 [Apollo ProMedia] (rev 05)
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ >SERR- <PERR+
Latency: 0
Region 0: Memory at f8000000 (32-bit, prefetchable) [size=64M]
Capabilities: [a0] AGP version 2.0
Status: RQ=7 SBA+ 64bit- FW- Rate=x1,x2
Command: RQ=0 SBA- AGP- 64bit- FW- Rate=<none>
00:01.0 PCI bridge: VIA Technologies, Inc. VT8601 [Apollo ProMedia AGP] (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66Mhz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ >SERR- <PERR+
Latency: 0
Bus: primary=00, secondary=01, subordinate=01, sec-latency=0
Memory behind bridge: f4100000-f57fffff
BridgeCtl: Parity- SERR- NoISA+ VGA+ MAbort- >Reset- FastB2B-
00:07.0 ISA bridge: VIA Technologies, Inc. VT82C686 [Apollo Super South] (rev 22)
Subsystem: VIA Technologies, Inc. VT82C686/A PCI to ISA Bridge
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping+ SERR- FastB2B-
Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 0
00:07.1 IDE interface: VIA Technologies, Inc. VT82C586B PIPC Bus Master IDE (rev 10) (prog-if 8a [Master SecP PriP])
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 64
Region 4: I/O ports at 1420 [size=16]
Capabilities: [c0] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
00:07.2 USB Controller: VIA Technologies, Inc. USB (rev 10) (prog-if 00 [UHCI])
Subsystem: VIA Technologies, Inc. (Wrong ID) USB Controller
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 64, cache line size 08
Interrupt: pin D routed to IRQ 11
Region 4: I/O ports at 1400 [size=32]
Capabilities: [80] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
00:07.4 ISA bridge: VIA Technologies, Inc. VT82C686 [Apollo Super ACPI] (rev 30)
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Interrupt: pin ? routed to IRQ 10
Capabilities: [68] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
00:07.5 Multimedia audio controller: VIA Technologies, Inc. VT82C686 AC97 Audio Controller (rev 20)
Subsystem: Compaq Computer Corporation Soundmax integrated digital audio
Control: I/O+ Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Interrupt: pin C routed to IRQ 9
Region 0: I/O ports at 1000 [size=256]
Region 1: I/O ports at 1434 [size=4]
Region 2: I/O ports at 1430 [size=4]
Capabilities: [c0] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
00:09.0 Communication controller: Conexant HSF 56k Data/Fax Modem (rev 01)
Subsystem: Compaq Computer Corporation Bear
Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Interrupt: pin A routed to IRQ 11
Region 0: Memory at f4000000 (32-bit, non-prefetchable) [size=64K]
Region 1: I/O ports at 1438 [size=8]
Capabilities: [40] Power Management version 2
Flags: PMEClk- DSI+ D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot+,D3cold+)
Status: D0 PME-Enable+ DSel=0 DScale=0 PME+
00:0a.0 CardBus bridge: Texas Instruments PCI1410 PC card Cardbus Controller (rev 01)
Subsystem: Compaq Computer Corporation: Unknown device b103
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 168, cache line size 04
Interrupt: pin A routed to IRQ 9
Region 0: Memory at 10000000 (32-bit, non-prefetchable) [size=4K]
Bus: primary=00, secondary=02, subordinate=05, sec-latency=176
Memory window 0: 10400000-107ff000 (prefetchable)
Memory window 1: 10800000-10bff000
I/O window 0: 00004000-000040ff
I/O window 1: 00004400-000044ff
BridgeCtl: Parity- SERR- ISA- VGA- MAbort- >Reset+ 16bInt+ PostWrite+
16-bit legacy interface ports at 0001
01:00.0 VGA compatible controller: Trident Microsystems CyberBlade i1 (rev 6a) (prog-if 00 [VGA])
Subsystem: Compaq Computer Corporation CyberBlade i1 AGP
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B+
Status: Cap+ 66Mhz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 64
Interrupt: pin A routed to IRQ 9
Region 0: Memory at f5000000 (32-bit, non-prefetchable) [size=8M]
Region 1: Memory at f4100000 (32-bit, non-prefetchable) [size=128K]
Region 2: Memory at f4800000 (32-bit, non-prefetchable) [size=8M]
Expansion ROM at <unassigned> [disabled] [size=64K]
Capabilities: [80] AGP version 1.0
Status: RQ=32 SBA+ 64bit- FW- Rate=x1,x2
Command: RQ=0 SBA- AGP- 64bit- FW- Rate=<none>
Capabilities: [90] Power Management version 1
Flags: PMEClk- DSI+ D1+ D2+ AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
^ permalink raw reply [flat|nested] 2+ messages in thread
* Re: 2.5 problem with SMC2632W adapter
2002-11-27 2:06 2.5 problem with SMC2632W adapter Thomas Molina
@ 2002-11-27 2:22 ` Larry McVoy
0 siblings, 0 replies; 2+ messages in thread
From: Larry McVoy @ 2002-11-27 2:22 UTC (permalink / raw)
To: Thomas Molina; +Cc: linux-kernel, alan
On Tue, Nov 26, 2002 at 08:06:39PM -0600, Thomas Molina wrote:
> I've previously written about my problems getting the above wireless
> PCMCIA network card working with 2.5. Since Alan seems to have added some
> network and cardbus changes I tried 2.5.49-ac2. I'm getting the same
> symptoms. Thus far, in addition to 2.5.49-ac2 I've tried 2.5.49 (latest
> bk), 2.5.48, 2.5.47, 2.4.18-18.8.0 (RedHat), and 2.4.19.
In the "for what it is worth" department, I have this card too as well as
an Orinoco, and I've never gotten the SMC card to work under recent kernels.
The weird thing is that I distinctly remember it working once upon a time.
So we've regressed as far as I can tell.
--
---
Larry McVoy lm at bitmover.com http://www.bitmover.com/lm
^ permalink raw reply [flat|nested] 2+ messages in thread
end of thread, other threads:[~2002-11-27 2:14 UTC | newest]
Thread overview: 2+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2002-11-27 2:06 2.5 problem with SMC2632W adapter Thomas Molina
2002-11-27 2:22 ` Larry McVoy
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.