ehci-hcd.o apparent load failure in 2.4.20-xx.. but

ehci-hcd.o apparent load failure in 2.4.20-xx.. but

[Frank Jacobberger]

Who maintains this driver?

I'm getting an odd error when kernel boots that the ehci-hcd.o.gz can't 
load..

or if doing an insmod ehci-hcd I get:

insmod ehci-hcd
Using /lib/modules/2.4.20-0.pp.7/kernel/drivers/usb/hcd/ehci-hcd.o.gz
/lib/modules/2.4.20-0.pp.7/kernel/drivers/usb/hcd/ehci-hcd.o.gz: 
init_module: No such device

Dmesg and everything else points to it loading:

hcd.c: ehci-hcd @ 00:1d.7, Intel Corp. 82801DB USB EHCI Controller

and:

Doing an lspci bears this out:

00:1d.7 USB Controller: Intel Corp. 82801DB USB EHCI Controller (rev 02)

No idea why the kernel is balking at boot and not logging this to kernel messages!

Any ideas?

Thanks,

Frank

Re: ehci-hcd.o apparent load failure in 2.4.20-xx.. but

[Greg KH]

On Sat, Dec 14, 2002 at 12:48:17AM -0700, Frank Jacobberger wrote:
> Who maintains this driver?

Look in MAINTAINERS and in the driver source, the name is there :)

> I'm getting an odd error when kernel boots that the ehci-hcd.o.gz can't 
> load..

See this thread on linux-usb-devel:
	http://marc.theaimsgroup.com/?l=linux-usb-devel&m=103987299402874&w=2

Which should get you going again for this specific Intel device.

Hope this helps,

greg k-h