is usb working under 2.5.59?

is usb working under 2.5.59?

[Gregoire Favre]

Hello,

I used to use usb under 2.4 with my Digital Ixus V with s10sh.
It worked just perfectly, now under 2.5.59, I don't even see the output
of a recongnize in the syslogd.

I have also tried gphoto2, which doesn't find any camera...

I have a MSI Max2-BLR motherboard with USB 2.0 on it:

lspci -v, the kernel config I use, /proc/bus/usb/devices, lsmod and dmesg
could be found under http://ulima.unil.ch/greg/linux/MAX2/

Should I provide some other info?

I could attach them if you prefer :-)

Should I change anything in my config?

Thank you very much,

	Grégoire
________________________________________________________________
http://ulima.unil.ch/greg ICQ:16624071 mailto:greg@ulima.unil.ch

Re: is usb working under 2.5.59?

[Jens Axboe]

On Sun, Feb 02 2003, Gregoire Favre wrote:
> Hello,
> 
> I used to use usb under 2.4 with my Digital Ixus V with s10sh.
> It worked just perfectly, now under 2.5.59, I don't even see the output
> of a recongnize in the syslogd.
> 
> I have also tried gphoto2, which doesn't find any camera...

Check that you have ohci/uhci in addition to the ehci controller, I just
spent an hour finding out why 1.x devices didn't work on my via board
(thanks David :)...

-- 
Jens Axboe

Re: is usb working under 2.5.59?

[Gregoire Favre]

On Sun, Feb 02, 2003 at 03:06:43PM +0100, Jens Axboe wrote:
> > Hello,
> > 
> > I used to use usb under 2.4 with my Digital Ixus V with s10sh.
> > It worked just perfectly, now under 2.5.59, I don't even see the output
> > of a recongnize in the syslogd.
> > 
> > I have also tried gphoto2, which doesn't find any camera...
> 
> Check that you have ohci/uhci in addition to the ehci controller, I just
> spent an hour finding out why 1.x devices didn't work on my via board
> (thanks David :)...

Well, yes I have it...as I put in
http://ulima.unil.ch/greg/linux/MAX2/lsmod-2.5.59 

ehci_hcd               17792  0 
ohci_hcd               12672  0 

Thank you very much, all suggestion are greatly appreciated ;-)

	Grégoire
________________________________________________________________
http://ulima.unil.ch/greg ICQ:16624071 mailto:greg@ulima.unil.ch