From: Ed Tomlinson <tomlins@cam.org>
To: Andrew Morton <akpm@digeo.com>,
linux-kernel@vger.kernel.org, linux-mm@kvack.org
Cc: Nick Piggin <piggin@cyberone.com.au>
Subject: Re: 2.5.63-mm1
Date: Thu, 27 Feb 2003 19:17:10 -0500 [thread overview]
Message-ID: <200302271917.10139.tomlins@cam.org> (raw)
In-Reply-To: <20030227025900.1205425a.akpm@digeo.com>
On February 27, 2003 05:59 am, Andrew Morton wrote:
> . Tons of changes to the anticipatory scheduler. It may not be working
> very well at present. Please use "elevator=deadline" if it causes
> problems.
The anticipatory scheduler hangs here at the same place it did in 62-mm2,
cfq continues to work fine. A sysrq+T of the hang follows:
Hope this helps,
Ed Tomlinson
SysRq : Show State
free sibling
task PC stack pid father child younger older
swapper D DFF8FB20 11876 1 0 2 (L-TLB)
Call Trace:
[<c01143aa>] io_schedule+0xe/0x18
[<c012a105>] __lock_page+0x8d/0xac
[<c0114ba8>] autoremove_wake_function+0x0/0x38
[<c0114ba8>] autoremove_wake_function+0x0/0x38
[<c012a58e>] do_generic_mapping_read+0x13a/0x340
[<c012aa5a>] __generic_file_aio_read+0x1c6/0x1e4
[<c012a794>] file_read_actor+0x0/0x100
[<c012ab3f>] generic_file_read+0x7f/0x9c
[<c015400c>] dput+0x1c/0x1a0
[<c015400c>] dput+0x1c/0x1a0
[<c012ff37>] kmem_cache_alloc+0x23/0x60
[<c0140e57>] vfs_read+0xab/0x150
[<c01498c4>] kernel_read+0x3c/0x48
[<c0161f82>] load_elf_binary+0x2f2/0xbbc
[<c012ab3f>] generic_file_read+0x7f/0x9c
[<c012f91c>] cache_init_objs+0x34/0x60
[<c012d2af>] buffered_rmqueue+0xfb/0x108
[<c012d33c>] __alloc_pages+0x80/0x264
[<c014a4ad>] search_binary_handler+0xad/0x23c
[<c0161c90>] load_elf_binary+0x0/0xbbc
[<c014a786>] do_execve+0x14a/0x1a8
[<c0107750>] sys_execve+0x2c/0x60
[<c0108c47>] syscall_call+0x7/0xb
[<c0105175>] init+0x109/0x174
[<c010506c>] init+0x0/0x174
[<c0107019>] kernel_thread_helper+0x5/0xc
ksoftirqd/0 S DFF8A000 4294963836 2 1 3 (L-TLB)
Call Trace:
[<c011a1fc>] ksoftirqd+0x24/0xa4
[<c011a23e>] ksoftirqd+0x66/0xa4
[<c011a1d8>] ksoftirqd+0x0/0xa4
[<c0107019>] kernel_thread_helper+0x5/0xc
events/0 D DFF89ED4 4294953708 3 1 12 4 2 (L-TLB)
Call Trace:
[<c0113985>] wait_for_completion+0x9d/0xe0
[<c0113788>] default_wake_function+0x0/0x18
[<c0113788>] default_wake_function+0x0/0x18
[<c0116363>] do_fork+0x113/0x14c
[<c010708e>] kernel_thread+0x6e/0x84
[<c0122b50>] __call_usermodehelper+0x0/0x58
[<c0122a70>] ____call_usermodehelper+0x0/0x94
[<c0107014>] kernel_thread_helper+0x0/0xc
[<c0122b80>] __call_usermodehelper+0x30/0x58
[<c0122a70>] ____call_usermodehelper+0x0/0x94
[<c012304f>] worker_thread+0x1a3/0x274
[<c0122eac>] worker_thread+0x0/0x274
[<c0122b50>] __call_usermodehelper+0x0/0x58
[<c0113788>] default_wake_function+0x0/0x18
[<c0113788>] default_wake_function+0x0/0x18
[<c0107019>] kernel_thread_helper+0x5/0xc
khubd D DFD61D94 4292690652 4 1 5 3 (L-TLB)
Call Trace:
[<c01136a0>] do_schedule+0x2a0/0x348
[<c0113985>] wait_for_completion+0x9d/0xe0
[<c0113788>] default_wake_function+0x0/0x18
[<c0113788>] default_wake_function+0x0/0x18
[<c0122cb2>] call_usermodehelper+0x10a/0x118
[<c01f44d8>] usb_hotplug+0x0/0x1c4
[<c0122b50>] __call_usermodehelper+0x0/0x58
[<c0122b50>] __call_usermodehelper+0x0/0x58
[<c01b5a42>] do_hotplug+0x1c2/0x1ec
[<c01b5a91>] dev_hotplug+0x25/0x30
[<c01f44d8>] usb_hotplug+0x0/0x1c4
[<c01b3d9a>] device_add+0x112/0x148
[<c01f4ef6>] usb_new_device+0x322/0x480
[<c0117086>] printk+0x122/0x148
[<c01f6a9f>] usb_hub_port_connect_change+0x233/0x2c4
[<c01f6c69>] usb_hub_events+0x139/0x2c8
[<c01f6e25>] usb_hub_thread+0x2d/0xd4
[<c01f6df8>] usb_hub_thread+0x0/0xd4
[<c0113788>] default_wake_function+0x0/0x18
[<c0107019>] kernel_thread_helper+0x5/0xc
pdflush S DFD2FFD4 4292485228 5 1 6 4 (L-TLB)
Call Trace:
[<c012e7e5>] __pdflush+0x95/0x1b0
[<c012e900>] pdflush+0x0/0x14
[<c012e90f>] pdflush+0xf/0x14
[<c0107019>] kernel_thread_helper+0x5/0xc
pdflush S DFD2DFD4 14388 6 1 7 5 (L-TLB)
Call Trace:
[<c012e7e5>] __pdflush+0x95/0x1b0
[<c012e900>] pdflush+0x0/0x14
[<c012e90f>] pdflush+0xf/0x14
[<c0107019>] kernel_thread_helper+0x5/0xc
kswapd0 S DFD29F44 4294958912 7 1 8 6 (L-TLB)
Call Trace:
[<c01328fb>] kswapd+0xcb/0xf0
[<c0132830>] kswapd+0x0/0xf0
[<c0109d26>] math_state_restore+0x2a/0x3c
[<c0108f05>] device_not_available+0x25/0x2a
[<c010e3f5>] save_init_fpu+0x1d/0x3c
[<c0113770>] preempt_schedule+0x28/0x40
[<c0112eb3>] schedule_tail+0x2f/0x94
[<c0108b06>] ret_from_fork+0x6/0x20
[<c0114ba8>] autoremove_wake_function+0x0/0x38
[<c0114ba8>] autoremove_wake_function+0x0/0x38
[<c0107019>] kernel_thread_helper+0x5/0xc
aio/0 S DFFE8EA0 4294952400 8 1 9 7 (L-TLB)
Call Trace:
[<c0122fa8>] worker_thread+0xfc/0x274
[<c0122eac>] worker_thread+0x0/0x274
[<c0113788>] default_wake_function+0x0/0x18
[<c0113788>] default_wake_function+0x0/0x18
[<c0107019>] kernel_thread_helper+0x5/0xc
kpnpbiosd Z DFFEE800 4294880232 9 1 10 8 (L-TLB)
Call Trace:
[<c0118b99>] do_exit+0x41d/0x428
[<c01aca44>] pnp_dock_thread+0x0/0xf4
[<c0118bbb>] complete_and_exit+0x17/0x18
[<c01acadc>] pnp_dock_thread+0x98/0xf4
[<c01aca44>] pnp_dock_thread+0x0/0xf4
[<c0107019>] kernel_thread_helper+0x5/0xc
kseriod S DFC44000 4294030016 10 1 11 9 (L-TLB)
Call Trace:
[<c02073e7>] serio_thread+0x9f/0x12c
[<c0207348>] serio_thread+0x0/0x12c
[<c0113788>] default_wake_function+0x0/0x18
[<c0107019>] kernel_thread_helper+0x5/0xc
reiserfs/0 S DFCBD460 8080 11 1 10 (L-TLB)
Call Trace:
[<c0122fa8>] worker_thread+0xfc/0x274
[<c0122eac>] worker_thread+0x0/0x274
[<c0113788>] default_wake_function+0x0/0x18
[<c0113788>] default_wake_function+0x0/0x18
[<c0107019>] kernel_thread_helper+0x5/0xc
events/0 D DFAC7A30 4294892756 12 3 (L-TLB)
Call Trace:
[<c01143aa>] io_schedule+0xe/0x18
[<c012a105>] __lock_page+0x8d/0xac
[<c0114ba8>] autoremove_wake_function+0x0/0x38
[<c0114ba8>] autoremove_wake_function+0x0/0x38
[<c012a58e>] do_generic_mapping_read+0x13a/0x340
[<c012aa5a>] __generic_file_aio_read+0x1c6/0x1e4
[<c012a794>] file_read_actor+0x0/0x100
[<c017f6b0>] reiserfs_get_block+0x0/0x11cc
[<c012ab3f>] generic_file_read+0x7f/0x9c
[<c015400c>] dput+0x1c/0x1a0
[<c015400c>] dput+0x1c/0x1a0
[<c012ff37>] kmem_cache_alloc+0x23/0x60
[<c0140e57>] vfs_read+0xab/0x150
[<c01498c4>] kernel_read+0x3c/0x48
[<c0161f82>] load_elf_binary+0x2f2/0xbbc
[<c012ab3f>] generic_file_read+0x7f/0x9c
[<c014bf83>] real_lookup+0x67/0xd0
[<c014c254>] do_lookup+0x48/0x84
[<c015400c>] dput+0x1c/0x1a0
[<c014c95a>] link_path_walk+0x6ca/0x848
[<c014a4ad>] search_binary_handler+0xad/0x23c
[<c0161c90>] load_elf_binary+0x0/0xbbc
[<c01614c1>] load_script+0x1d1/0x1e0
[<c012d2af>] buffered_rmqueue+0xfb/0x108
[<c012d33c>] __alloc_pages+0x80/0x264
[<c014a4ad>] search_binary_handler+0xad/0x23c
[<c01612f0>] load_script+0x0/0x1e0
[<c014a786>] do_execve+0x14a/0x1a8
[<c0107750>] sys_execve+0x2c/0x60
[<c0108c47>] syscall_call+0x7/0xb
[<c0122ae8>] ____call_usermodehelper+0x78/0x94
[<c0122a70>] ____call_usermodehelper+0x0/0x94
[<c0107019>] kernel_thread_helper+0x5/0xc
WARNING: multiple messages have this Message-ID (diff)
From: Ed Tomlinson <tomlins@cam.org>
To: Andrew Morton <akpm@digeo.com>,
linux-kernel@vger.kernel.org, linux-mm@kvack.org
Cc: Nick Piggin <piggin@cyberone.com.au>
Subject: Re: 2.5.63-mm1
Date: Thu, 27 Feb 2003 19:17:10 -0500 [thread overview]
Message-ID: <200302271917.10139.tomlins@cam.org> (raw)
In-Reply-To: <20030227025900.1205425a.akpm@digeo.com>
On February 27, 2003 05:59 am, Andrew Morton wrote:
> . Tons of changes to the anticipatory scheduler. It may not be working
> very well at present. Please use "elevator=deadline" if it causes
> problems.
The anticipatory scheduler hangs here at the same place it did in 62-mm2,
cfq continues to work fine. A sysrq+T of the hang follows:
Hope this helps,
Ed Tomlinson
SysRq : Show State
free sibling
task PC stack pid father child younger older
swapper D DFF8FB20 11876 1 0 2 (L-TLB)
Call Trace:
[<c01143aa>] io_schedule+0xe/0x18
[<c012a105>] __lock_page+0x8d/0xac
[<c0114ba8>] autoremove_wake_function+0x0/0x38
[<c0114ba8>] autoremove_wake_function+0x0/0x38
[<c012a58e>] do_generic_mapping_read+0x13a/0x340
[<c012aa5a>] __generic_file_aio_read+0x1c6/0x1e4
[<c012a794>] file_read_actor+0x0/0x100
[<c012ab3f>] generic_file_read+0x7f/0x9c
[<c015400c>] dput+0x1c/0x1a0
[<c015400c>] dput+0x1c/0x1a0
[<c012ff37>] kmem_cache_alloc+0x23/0x60
[<c0140e57>] vfs_read+0xab/0x150
[<c01498c4>] kernel_read+0x3c/0x48
[<c0161f82>] load_elf_binary+0x2f2/0xbbc
[<c012ab3f>] generic_file_read+0x7f/0x9c
[<c012f91c>] cache_init_objs+0x34/0x60
[<c012d2af>] buffered_rmqueue+0xfb/0x108
[<c012d33c>] __alloc_pages+0x80/0x264
[<c014a4ad>] search_binary_handler+0xad/0x23c
[<c0161c90>] load_elf_binary+0x0/0xbbc
[<c014a786>] do_execve+0x14a/0x1a8
[<c0107750>] sys_execve+0x2c/0x60
[<c0108c47>] syscall_call+0x7/0xb
[<c0105175>] init+0x109/0x174
[<c010506c>] init+0x0/0x174
[<c0107019>] kernel_thread_helper+0x5/0xc
ksoftirqd/0 S DFF8A000 4294963836 2 1 3 (L-TLB)
Call Trace:
[<c011a1fc>] ksoftirqd+0x24/0xa4
[<c011a23e>] ksoftirqd+0x66/0xa4
[<c011a1d8>] ksoftirqd+0x0/0xa4
[<c0107019>] kernel_thread_helper+0x5/0xc
events/0 D DFF89ED4 4294953708 3 1 12 4 2 (L-TLB)
Call Trace:
[<c0113985>] wait_for_completion+0x9d/0xe0
[<c0113788>] default_wake_function+0x0/0x18
[<c0113788>] default_wake_function+0x0/0x18
[<c0116363>] do_fork+0x113/0x14c
[<c010708e>] kernel_thread+0x6e/0x84
[<c0122b50>] __call_usermodehelper+0x0/0x58
[<c0122a70>] ____call_usermodehelper+0x0/0x94
[<c0107014>] kernel_thread_helper+0x0/0xc
[<c0122b80>] __call_usermodehelper+0x30/0x58
[<c0122a70>] ____call_usermodehelper+0x0/0x94
[<c012304f>] worker_thread+0x1a3/0x274
[<c0122eac>] worker_thread+0x0/0x274
[<c0122b50>] __call_usermodehelper+0x0/0x58
[<c0113788>] default_wake_function+0x0/0x18
[<c0113788>] default_wake_function+0x0/0x18
[<c0107019>] kernel_thread_helper+0x5/0xc
khubd D DFD61D94 4292690652 4 1 5 3 (L-TLB)
Call Trace:
[<c01136a0>] do_schedule+0x2a0/0x348
[<c0113985>] wait_for_completion+0x9d/0xe0
[<c0113788>] default_wake_function+0x0/0x18
[<c0113788>] default_wake_function+0x0/0x18
[<c0122cb2>] call_usermodehelper+0x10a/0x118
[<c01f44d8>] usb_hotplug+0x0/0x1c4
[<c0122b50>] __call_usermodehelper+0x0/0x58
[<c0122b50>] __call_usermodehelper+0x0/0x58
[<c01b5a42>] do_hotplug+0x1c2/0x1ec
[<c01b5a91>] dev_hotplug+0x25/0x30
[<c01f44d8>] usb_hotplug+0x0/0x1c4
[<c01b3d9a>] device_add+0x112/0x148
[<c01f4ef6>] usb_new_device+0x322/0x480
[<c0117086>] printk+0x122/0x148
[<c01f6a9f>] usb_hub_port_connect_change+0x233/0x2c4
[<c01f6c69>] usb_hub_events+0x139/0x2c8
[<c01f6e25>] usb_hub_thread+0x2d/0xd4
[<c01f6df8>] usb_hub_thread+0x0/0xd4
[<c0113788>] default_wake_function+0x0/0x18
[<c0107019>] kernel_thread_helper+0x5/0xc
pdflush S DFD2FFD4 4292485228 5 1 6 4 (L-TLB)
Call Trace:
[<c012e7e5>] __pdflush+0x95/0x1b0
[<c012e900>] pdflush+0x0/0x14
[<c012e90f>] pdflush+0xf/0x14
[<c0107019>] kernel_thread_helper+0x5/0xc
pdflush S DFD2DFD4 14388 6 1 7 5 (L-TLB)
Call Trace:
[<c012e7e5>] __pdflush+0x95/0x1b0
[<c012e900>] pdflush+0x0/0x14
[<c012e90f>] pdflush+0xf/0x14
[<c0107019>] kernel_thread_helper+0x5/0xc
kswapd0 S DFD29F44 4294958912 7 1 8 6 (L-TLB)
Call Trace:
[<c01328fb>] kswapd+0xcb/0xf0
[<c0132830>] kswapd+0x0/0xf0
[<c0109d26>] math_state_restore+0x2a/0x3c
[<c0108f05>] device_not_available+0x25/0x2a
[<c010e3f5>] save_init_fpu+0x1d/0x3c
[<c0113770>] preempt_schedule+0x28/0x40
[<c0112eb3>] schedule_tail+0x2f/0x94
[<c0108b06>] ret_from_fork+0x6/0x20
[<c0114ba8>] autoremove_wake_function+0x0/0x38
[<c0114ba8>] autoremove_wake_function+0x0/0x38
[<c0107019>] kernel_thread_helper+0x5/0xc
aio/0 S DFFE8EA0 4294952400 8 1 9 7 (L-TLB)
Call Trace:
[<c0122fa8>] worker_thread+0xfc/0x274
[<c0122eac>] worker_thread+0x0/0x274
[<c0113788>] default_wake_function+0x0/0x18
[<c0113788>] default_wake_function+0x0/0x18
[<c0107019>] kernel_thread_helper+0x5/0xc
kpnpbiosd Z DFFEE800 4294880232 9 1 10 8 (L-TLB)
Call Trace:
[<c0118b99>] do_exit+0x41d/0x428
[<c01aca44>] pnp_dock_thread+0x0/0xf4
[<c0118bbb>] complete_and_exit+0x17/0x18
[<c01acadc>] pnp_dock_thread+0x98/0xf4
[<c01aca44>] pnp_dock_thread+0x0/0xf4
[<c0107019>] kernel_thread_helper+0x5/0xc
kseriod S DFC44000 4294030016 10 1 11 9 (L-TLB)
Call Trace:
[<c02073e7>] serio_thread+0x9f/0x12c
[<c0207348>] serio_thread+0x0/0x12c
[<c0113788>] default_wake_function+0x0/0x18
[<c0107019>] kernel_thread_helper+0x5/0xc
reiserfs/0 S DFCBD460 8080 11 1 10 (L-TLB)
Call Trace:
[<c0122fa8>] worker_thread+0xfc/0x274
[<c0122eac>] worker_thread+0x0/0x274
[<c0113788>] default_wake_function+0x0/0x18
[<c0113788>] default_wake_function+0x0/0x18
[<c0107019>] kernel_thread_helper+0x5/0xc
events/0 D DFAC7A30 4294892756 12 3 (L-TLB)
Call Trace:
[<c01143aa>] io_schedule+0xe/0x18
[<c012a105>] __lock_page+0x8d/0xac
[<c0114ba8>] autoremove_wake_function+0x0/0x38
[<c0114ba8>] autoremove_wake_function+0x0/0x38
[<c012a58e>] do_generic_mapping_read+0x13a/0x340
[<c012aa5a>] __generic_file_aio_read+0x1c6/0x1e4
[<c012a794>] file_read_actor+0x0/0x100
[<c017f6b0>] reiserfs_get_block+0x0/0x11cc
[<c012ab3f>] generic_file_read+0x7f/0x9c
[<c015400c>] dput+0x1c/0x1a0
[<c015400c>] dput+0x1c/0x1a0
[<c012ff37>] kmem_cache_alloc+0x23/0x60
[<c0140e57>] vfs_read+0xab/0x150
[<c01498c4>] kernel_read+0x3c/0x48
[<c0161f82>] load_elf_binary+0x2f2/0xbbc
[<c012ab3f>] generic_file_read+0x7f/0x9c
[<c014bf83>] real_lookup+0x67/0xd0
[<c014c254>] do_lookup+0x48/0x84
[<c015400c>] dput+0x1c/0x1a0
[<c014c95a>] link_path_walk+0x6ca/0x848
[<c014a4ad>] search_binary_handler+0xad/0x23c
[<c0161c90>] load_elf_binary+0x0/0xbbc
[<c01614c1>] load_script+0x1d1/0x1e0
[<c012d2af>] buffered_rmqueue+0xfb/0x108
[<c012d33c>] __alloc_pages+0x80/0x264
[<c014a4ad>] search_binary_handler+0xad/0x23c
[<c01612f0>] load_script+0x0/0x1e0
[<c014a786>] do_execve+0x14a/0x1a8
[<c0107750>] sys_execve+0x2c/0x60
[<c0108c47>] syscall_call+0x7/0xb
[<c0122ae8>] ____call_usermodehelper+0x78/0x94
[<c0122a70>] ____call_usermodehelper+0x0/0x94
[<c0107019>] kernel_thread_helper+0x5/0xc
--
To unsubscribe, send a message with 'unsubscribe linux-mm' in
the body to majordomo@kvack.org. For more info on Linux MM,
see: http://www.linux-mm.org/ .
Don't email: <a href=mailto:"aart@kvack.org">aart@kvack.org</a>
next prev parent reply other threads:[~2003-02-28 0:06 UTC|newest]
Thread overview: 44+ messages / expand[flat|nested] mbox.gz Atom feed top
2003-02-27 10:59 2.5.63-mm1 Andrew Morton
2003-02-27 10:59 ` 2.5.63-mm1 Andrew Morton
2003-02-27 21:22 ` Rising io_load results 2.5.63-mm1 Con Kolivas
2003-02-27 21:22 ` Con Kolivas
2003-02-27 21:44 ` Andrew Morton
2003-02-27 21:44 ` Andrew Morton
2003-02-27 22:01 ` Dave McCracken
2003-02-27 22:24 ` Andrew Morton
2003-02-27 22:24 ` Andrew Morton
2003-03-03 21:06 ` [PATCH 2.5.63] Teach page_mapped about the anon flag Dave McCracken
2003-03-03 21:12 ` Andrew Morton
2003-03-03 21:12 ` Andrew Morton
2003-03-03 21:24 ` Dave McCracken
2003-03-03 21:24 ` Dave McCracken
2003-03-03 21:35 ` Andrew Morton
2003-03-03 21:35 ` Andrew Morton
2003-03-03 21:52 ` Dave McCracken
2003-03-03 21:52 ` Dave McCracken
2003-03-03 22:15 ` Andrew Morton
2003-03-03 22:15 ` Andrew Morton
2003-03-04 18:32 ` [PATCH 2.5.63] Make objrmap mapcount non-atomic Dave McCracken
2003-02-27 23:56 ` Rising io_load results Re: 2.5.63-mm1 Con Kolivas
2003-02-27 23:56 ` Con Kolivas
2003-02-28 0:06 ` Andrew Morton
2003-02-28 0:06 ` Andrew Morton
2003-02-28 0:28 ` Con Kolivas
2003-02-28 0:28 ` Con Kolivas
2003-02-28 7:46 ` Duncan Sands
2003-02-28 7:46 ` Duncan Sands
2003-02-28 8:06 ` Andrew Morton
2003-02-28 8:06 ` Andrew Morton
2003-02-28 12:48 ` Hugh Dickins
2003-02-28 12:48 ` Hugh Dickins
2003-02-28 15:56 ` Dave McCracken
2003-02-28 15:56 ` Dave McCracken
2003-02-28 0:17 ` Ed Tomlinson [this message]
2003-02-28 0:17 ` 2.5.63-mm1 Ed Tomlinson
2003-02-28 0:46 ` 2.5.63-mm1 Andrew Morton
2003-02-28 0:46 ` 2.5.63-mm1 Andrew Morton
2003-02-28 12:16 ` 2.5.63-mm1 steven roemen
2003-02-28 12:16 ` 2.5.63-mm1 steven roemen
2003-02-28 12:24 ` 2.5.63-mm1 Andrew Morton
2003-02-28 12:24 ` 2.5.63-mm1 Andrew Morton
[not found] ` <3E5F7DAD.2080306@cyberone.com.au>
[not found] ` <200302282227.56311.tomlins@cam.org>
2003-03-01 15:04 ` [PATCH] tiobench on UP and ptg-D3-mm1 Ed Tomlinson
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=200302271917.10139.tomlins@cam.org \
--to=tomlins@cam.org \
--cc=akpm@digeo.com \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-mm@kvack.org \
--cc=piggin@cyberone.com.au \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.