From: Ed Tomlinson <tomlins@cam.org>
To: Andrew Morton <akpm@digeo.com>,
linux-kernel@vger.kernel.org, linux-mm@kvack.org
Subject: Re: 2.5.70-mm1
Date: Tue, 27 May 2003 16:33:40 -0400 [thread overview]
Message-ID: <200305271633.40421.tomlins@cam.org> (raw)
In-Reply-To: <200305271238.25935.m.c.p@wolk-project.de>
Hi Andrew,
This one oops on boot 2 out of 3 tries.
Ideas?
Ed
Linux version 2.5.70-mm1 (ed@oscar) (gcc version 2.95.4 20011002 (Debian prerelease)) #1 Tue May 27 11:52:56 EDT 2003
Video mode to be used for restore is f00
BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 00000000000a0000 (usable)
BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
BIOS-e820: 0000000000100000 - 000000001fff0000 (usable)
BIOS-e820: 000000001fff0000 - 000000001fff3000 (ACPI NVS)
BIOS-e820: 000000001fff3000 - 0000000020000000 (ACPI data)
BIOS-e820: 00000000ffff0000 - 0000000100000000 (reserved)
511MB LOWMEM available.
On node 0 totalpages: 131056
DMA zone: 4096 pages, LIFO batch:1
Normal zone: 126960 pages, LIFO batch:16
HighMem zone: 0 pages, LIFO batch:1
Building zonelist for node : 0
Kernel command line: auto BOOT_IMAGE=Linux ro root=2103 console=tty0 console=ttyS0,38400 idebus=33 profile=1
ide_setup: idebus=33
kernel profiling enabled
Initializing CPU#0
PID hash table entries: 2048 (order 11: 16384 bytes)
Detected 400.974 MHz processor.
Console: colour VGA+ 80x25
Calibrating delay loop... 790.52 BogoMIPS
Memory: 512884k/524224k available (1450k kernel code, 10580k reserved, 739k data, 112k init, 0k highmem)
Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
Mount-cache hash table entries: 512 (order: 0, 4096 bytes)
-> /dev
-> /dev/console
-> /root
Enabling new style K6 write allocation for 511 Mb
CPU: L1 I Cache: 32K (32 bytes/line), D cache 32K (32 bytes/line)
CPU: L2 Cache: 256K (32 bytes/line)
CPU: AMD-K6(tm) 3D+ Processor stepping 01
Checking 'hlt' instruction... OK.
POSIX conformance testing by UNIFIX
mtrr: v2.0 (20020519)
Initializing RT netlink socket
PCI: PCI BIOS revision 2.10 entry at 0xfb520, last bus=1
PCI: Using configuration type 1
BIO: pool of 256 setup, 14Kb (56 bytes/bio)
biovec pool[0]: 1 bvecs: 256 entries (12 bytes)
biovec pool[1]: 4 bvecs: 256 entries (48 bytes)
biovec pool[2]: 16 bvecs: 256 entries (192 bytes)
biovec pool[3]: 64 bvecs: 256 entries (768 bytes)
biovec pool[4]: 128 bvecs: 256 entries (1536 bytes)
biovec pool[5]: 256 bvecs: 256 entries (3072 bytes)
Linux Plug and Play Support v0.96 (c) Adam Belay
PnPBIOS: Scanning system for PnP BIOS support...
PnPBIOS: Found PnP BIOS installation structure at 0xc00fc160
PnPBIOS: PnP BIOS version 1.0, entry 0xf0000:0xc188, dseg 0xf0000
PnPBIOS: 14 nodes reported by PnP BIOS; 14 recorded by driver
drivers/usb/core/usb.c: registered new driver usbfs
drivers/usb/core/usb.c: registered new driver hub
PCI: Probing PCI hardware
PCI: Probing PCI hardware (bus 00)
PCI: Using IRQ router VIA [1106/0586] at 00:07.0
Initializing Cryptographic API
Activating ISA DMA hang workarounds.
isapnp: Scanning for PnP cards...
isapnp: No Plug & Play device found
radeonfb_pci_register BEGIN
radeonfb: ref_clk=2700, ref_div=60, xclk=15500 from BIOS
radeonfb: probed DDR SGRAM 65536k videoram
radeonfb: ATI Radeon VE QY DDR SGRAM 64 MB
radeonfb: DVI port no monitor connected
radeonfb: CRT port CRT monitor connected
radeonfb_pci_register END
hStart = 664, hEnd = 760, hTotal = 800
vStart = 491, vEnd = 493, vTotal = 525
h_total_disp = 0x4f0063 hsync_strt_wid = 0x8c02a2
v_total_disp = 0x1df020c vsync_strt_wid = 0x8201ea
post div = 0x8
fb_div = 0x1bf
ppll_div_3 = 0x301bf
ron = 1040, roff = 22092
vclk_freq = 2514, per = 789
Console: switching to colour frame buffer device 80x60
pty: 256 Unix98 ptys configured
Linux agpgart interface v0.100 (c) Dave Jones
agpgart: Detected VIA MVP3 chipset
agpgart: Maximum main memory to use for agp memory: 439M
agpgart: AGP aperture is 64M @ 0xe8000000
[drm] Initialized radeon 1.8.0 20020828 on minor 0
Serial: 8250/16550 driver $Revision: 1.90 $ IRQ sharing disabled
ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
ttyS2 at I/O 0x3e8 (irq = 4) is a 16550A
Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
ide: Assuming 33MHz system bus speed for PIO modes
VP_IDE: IDE controller at PCI slot 00:07.1
VP_IDE: chipset revision 6
VP_IDE: not 100% native mode: will probe irqs later
VP_IDE: VIA vt82c586b (rev 47) IDE UDMA33 controller on pci00:07.1
ide0: BM-DMA at 0xa000-0xa007, BIOS settings: hda:DMA, hdb:DMA
ide1: BM-DMA at 0xa008-0xa00f, BIOS settings: hdc:DMA, hdd:DMA
hda: QUANTUM FIREBALLP KA13.6, ATA DISK drive
anticipatory scheduling elevator
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
hdc: AOPEN 16XDVD-ROM/AMH 20020328, ATAPI CD/DVD-ROM drive
hdd: Maxtor 6Y080L0, ATA DISK drive
anticipatory scheduling elevator
anticipatory scheduling elevator
ide1 at 0x170-0x177,0x376 on irq 15
PDC20267: IDE controller at PCI slot 00:09.0
PCI: Found IRQ 12 for device 00:09.0
PDC20267: chipset revision 2
PDC20267: not 100% native mode: will probe irqs later
PDC20267: ROM enabled at 0xef000000
PDC20267: (U)DMA Burst Bit ENABLED Primary PCI Mode Secondary PCI Mode.
ide2: BM-DMA at 0xbc00-0xbc07, BIOS settings: hde:DMA, hdf:pio
ide3: BM-DMA at 0xbc08-0xbc0f, BIOS settings: hdg:DMA, hdh:DMA
hde: QUANTUM FIREBALLP AS40.0, ATA DISK drive
anticipatory scheduling elevator
ide2 at 0xac00-0xac07,0xb002 on irq 12
hdg: QUANTUM FIREBALLP AS40.0, ATA DISK drive
anticipatory scheduling elevator
ide3 at 0xb400-0xb407,0xb802 on irq 12
hda: max request size: 128KiB
hda: host protected area => 1
hda: 27067824 sectors (13859 MB) w/371KiB Cache, CHS=26853/16/63, UDMA(33)
hda: hda1 hda2 hda3 hda4 < hda5 >
hdd: max request size: 128KiB
hdd: host protected area => 1
hdd: 160086528 sectors (81964 MB) w/2048KiB Cache, CHS=158816/16/63, UDMA(33)
hdd: hdd1
hde: max request size: 128KiB
hde: host protected area => 1
hde: 78177792 sectors (40027 MB) w/1902KiB Cache, CHS=77557/16/63, UDMA(100)
hde: hde1 hde2 hde3 hde4 < hde5 >
hdg: max request size: 128KiB
hdg: host protected area => 1
hdg: 78177792 sectors (40027 MB) w/1902KiB Cache, CHS=77557/16/63, UDMA(100)
hdg: hdg1 hdg2 hdg3 hdg4 < hdg5 >
Console: switching to colour frame buffer device 80x60
drivers/usb/host/uhci-hcd.c: USB Universal Host Controller Interface driver v2.1
uhci-hcd 00:07.2: VIA Technologies, In USB
uhci-hcd 00:07.2: irq 10, io base 0000a400
Please use the 'usbfs' filetype instead, the 'usbdevfs' name is deprecated.
uhci-hcd 00:07.2: new USB bus registered, assigned bus number 1
hub 1-0:0: USB hub found
hub 1-0:0: 2 ports detected
serio: i8042 AUX port at 0x60,0x64 irq 12
input: AT Set 2 keyboard on isa0060/serio0
serio: i8042 KBD port at 0x60,0x64 irq 1
NET4: Linux TCP/IP 1.0 for NET4.0
IP: routing cache hash table of 4096 buckets, 32Kbytes
TCP: Hash tables configured (established 32768 bind 32768)
NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
found reiserfs format "3.6" with standard journal
hub 1-0:0: debounce: port 1: delay 100ms stable 4 status 0x101
hub 1-0:0: new USB device on port 1, assigned address 2
Reiserfs journal params: device hde3, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30
reiserfs: checking transaction log (hde3) for (hde3)
hub 1-1:0: USB hub found
Using r5 hash to sort names
VFS: Mounted root (reiserfs filesystem) readonly.
hub 1-1:0: 4 ports detected
Freeing unused kernel memory: 112k freed
hub 1-0:0: debounce: port 2: delay 100ms stable 4 status 0x301
INIT: version 2.84 booting
hub 1-0:0: new USB device on port 2, assigned address 3
hub 1-1:0: debounce: port 1: delay 100ms stable 4 status 0x101
hub 1-1:0: new USB device on port 1, assigned address 4
hub 1-1:0: debounce: port 4: delay 100ms stable 4 status 0x101
hub 1-1:0: new USB device on port 4, assigned address 5
Loading /etc/console/boottime.kmap.gz
input: USB HID v1.00 Mouse [Microsoft Microsoft IntelliMouse® Optical] on usb-00:07.2-2
drivers/usb/core/usb.c: registered new driver hid
SCSI subsystem initialized
Initializing USB Mass Storage driver...
drivers/usb/input/hid-core.c: v2.0:USB HID core driver
scsi0 : SCSI emulation for USB Mass Storage devices
anticipatory scheduling elevator
Vendor: Sandisk Model: ImageMate SDDR-0 Rev: 0208
Type: Direct-Access ANSI SCSI revision: 02
anticipatory scheduling elevator
anticipatory scheduling elevator
mice: PS/2 mouse device common for all mice
anticipatory scheduling elevator
anticipatory scheduling elevator
modprobe: WARNINpl2303: Unknown symbol usb_serial_disconnect
G: Error inserting usbserial (/lpl2303: Unknown symbol usb_serial_probe
ib/modules/2.5.70-mm1/kernel/drianticipatory scheduling elevator
vers/usb/serial/usbserial.ko): Fanticipatory scheduling elevator
ile exists
anticipatory scheduling elevator
drivers/usb/core/usb.c: registered new driver usbserial
drivers/usb/serial/usb-serial.c: USB Serial Driver core v2.0
drivers/usb/core/usb.c: registered new driver usb-storage
USB Mass Storage support registered.
pl2303: Unknown symbol usb_serial_register
pl2303: Unknown symbol usb_serial_deregister
Unable to handle kernel paging request at virtual address e48e11fc
printing eip:
c01296b9
*pde = 1fd6d067
*pte = 00000000
Oops: 0000 [#1]
CPU: 0
EIP: 0060:[<c01296b9>] Not tainted VLI
EFLAGS: 00010282
EIP is at load_module+0x7c5/0x800
eax: e48e1120 ebx: e48e1120 ecx: dffea948 edx: dffea958
esi: fffffffe edi: e48e1120 ebp: df3aff98 esp: df3aff2c
ds: 007b es: 007b ss: 0068
Process modprobe (pid: 128, threadinfo=df3ae000 task=df3d12d0)
Stack: df3ae000 c02c321c 00000000 e48e0ae0 0000002c 0000004c 00000048 3ed3bc9b
e48d0000 e48e1120 00000000 00000000 00000000 00000000 00000008 0000000d
0000000b 00000000 00000000 00000000 00000013 00000012 e48ef38c df76eb7c
Call Trace:
[<c012976e>] sys_init_module+0x7a/0x240
[<c0108da7>] syscall_call+0x7/0xb
Code: 45 b8 eb 58 8b 5d b8 53 e8 d5 ea ff ff ff 73 6c 53 e8 d4 8a fe ff 83 c4 0c 8b 7d b8 ff 77 70 57 e8 c5 8a fe ff 83 c4 08 8b 45 b8 <83> b8 dc 00 00 00 00 74 08 0f 0b 61 01 59 4b 27 c0 8b 55 f0 52
Activating swap.
<6>Adding 393552k swap on /dev/hda1. Priority:1 extents:1
Adding 393584k swap on /dev/hde1. Priority:1 extents:1
Adding 393584k swap on /dev/hdg1. Priority:1 extents:1
modprobe: FATAL: Module rtc not found.
System time was Tue May 27 19:43:14 UTC 2003.
Setting the System Clock using the Hardware Clock as reference...
modprobe: FATAL: Module rtc not found.
modprobe: FATAL: Module rtc not found.
System Clock set. System local time is now Tue May 27 15:43:16 EDT 2003.
Running 0dns-down to make sure resolv.conf is ok...done.
Loading modules: tulipwarning: process `update' used the obsolete bdflush system call
Fix your initscripts?
Linux version 2.5.70-mm1 (ed@oscar) (gcc version 2.95.4 20011002 (Debian prerelease)) #1 Tue May 27 11:52:56 EDT 2003
Video mode to be used for restore is f00
BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 00000000000a0000 (usable)
BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
BIOS-e820: 0000000000100000 - 000000001fff0000 (usable)
BIOS-e820: 000000001fff0000 - 000000001fff3000 (ACPI NVS)
BIOS-e820: 000000001fff3000 - 0000000020000000 (ACPI data)
BIOS-e820: 00000000ffff0000 - 0000000100000000 (reserved)
511MB LOWMEM available.
On node 0 totalpages: 131056
DMA zone: 4096 pages, LIFO batch:1
Normal zone: 126960 pages, LIFO batch:16
HighMem zone: 0 pages, LIFO batch:1
Building zonelist for node : 0
Kernel command line: auto BOOT_IMAGE=Linux ro root=2103 console=tty0 console=ttyS0,38400 idebus=33 profile=1
ide_setup: idebus=33
kernel profiling enabled
Initializing CPU#0
PID hash table entries: 2048 (order 11: 16384 bytes)
Detected 400.936 MHz processor.
Console: colour VGA+ 80x25
Calibrating delay loop... 790.52 BogoMIPS
Memory: 512884k/524224k available (1450k kernel code, 10580k reserved, 739k data, 112k init, 0k highmem)
Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
Mount-cache hash table entries: 512 (order: 0, 4096 bytes)
-> /dev
-> /dev/console
-> /root
Enabling new style K6 write allocation for 511 Mb
CPU: L1 I Cache: 32K (32 bytes/line), D cache 32K (32 bytes/line)
CPU: L2 Cache: 256K (32 bytes/line)
CPU: AMD-K6(tm) 3D+ Processor stepping 01
Checking 'hlt' instruction... OK.
POSIX conformance testing by UNIFIX
mtrr: v2.0 (20020519)
Initializing RT netlink socket
PCI: PCI BIOS revision 2.10 entry at 0xfb520, last bus=1
PCI: Using configuration type 1
BIO: pool of 256 setup, 14Kb (56 bytes/bio)
biovec pool[0]: 1 bvecs: 256 entries (12 bytes)
biovec pool[1]: 4 bvecs: 256 entries (48 bytes)
biovec pool[2]: 16 bvecs: 256 entries (192 bytes)
biovec pool[3]: 64 bvecs: 256 entries (768 bytes)
biovec pool[4]: 128 bvecs: 256 entries (1536 bytes)
biovec pool[5]: 256 bvecs: 256 entries (3072 bytes)
Linux Plug and Play Support v0.96 (c) Adam Belay
PnPBIOS: Scanning system for PnP BIOS support...
PnPBIOS: Found PnP BIOS installation structure at 0xc00fc160
PnPBIOS: PnP BIOS version 1.0, entry 0xf0000:0xc188, dseg 0xf0000
PnPBIOS: 14 nodes reported by PnP BIOS; 14 recorded by driver
drivers/usb/core/usb.c: registered new driver usbfs
drivers/usb/core/usb.c: registered new driver hub
PCI: Probing PCI hardware
PCI: Probing PCI hardware (bus 00)
PCI: Using IRQ router VIA [1106/0586] at 00:07.0
Initializing Cryptographic API
Activating ISA DMA hang workarounds.
isapnp: Scanning for PnP cards...
isapnp: No Plug & Play device found
radeonfb_pci_register BEGIN
radeonfb: ref_clk=2700, ref_div=60, xclk=15500 from BIOS
radeonfb: probed DDR SGRAM 65536k videoram
radeonfb: ATI Radeon VE QY DDR SGRAM 64 MB
radeonfb: DVI port no monitor connected
radeonfb: CRT port CRT monitor connected
radeonfb_pci_register END
hStart = 664, hEnd = 760, hTotal = 800
vStart = 491, vEnd = 493, vTotal = 525
h_total_disp = 0x4f0063 hsync_strt_wid = 0x8c02a2
v_total_disp = 0x1df020c vsync_strt_wid = 0x8201ea
post div = 0x8
fb_div = 0x1bf
ppll_div_3 = 0x301bf
ron = 1040, roff = 22092
vclk_freq = 2514, per = 789
Console: switching to colour frame buffer device 80x60
pty: 256 Unix98 ptys configured
Linux agpgart interface v0.100 (c) Dave Jones
agpgart: Detected VIA MVP3 chipset
agpgart: Maximum main memory to use for agp memory: 439M
agpgart: AGP aperture is 64M @ 0xe8000000
[drm] Initialized radeon 1.8.0 20020828 on minor 0
Serial: 8250/16550 driver $Revision: 1.90 $ IRQ sharing disabled
ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
ttyS2 at I/O 0x3e8 (irq = 4) is a 16550A
Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
ide: Assuming 33MHz system bus speed for PIO modes
VP_IDE: IDE controller at PCI slot 00:07.1
VP_IDE: chipset revision 6
VP_IDE: not 100% native mode: will probe irqs later
VP_IDE: VIA vt82c586b (rev 47) IDE UDMA33 controller on pci00:07.1
ide0: BM-DMA at 0xa000-0xa007, BIOS settings: hda:DMA, hdb:DMA
ide1: BM-DMA at 0xa008-0xa00f, BIOS settings: hdc:DMA, hdd:DMA
hda: QUANTUM FIREBALLP KA13.6, ATA DISK drive
anticipatory scheduling elevator
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
hdc: AOPEN 16XDVD-ROM/AMH 20020328, ATAPI CD/DVD-ROM drive
hdd: Maxtor 6Y080L0, ATA DISK drive
anticipatory scheduling elevator
anticipatory scheduling elevator
ide1 at 0x170-0x177,0x376 on irq 15
PDC20267: IDE controller at PCI slot 00:09.0
PCI: Found IRQ 12 for device 00:09.0
PDC20267: chipset revision 2
PDC20267: not 100% native mode: will probe irqs later
PDC20267: ROM enabled at 0xef000000
PDC20267: (U)DMA Burst Bit ENABLED Primary PCI Mode Secondary PCI Mode.
ide2: BM-DMA at 0xbc00-0xbc07, BIOS settings: hde:DMA, hdf:pio
ide3: BM-DMA at 0xbc08-0xbc0f, BIOS settings: hdg:DMA, hdh:DMA
hde: QUANTUM FIREBALLP AS40.0, ATA DISK drive
anticipatory scheduling elevator
ide2 at 0xac00-0xac07,0xb002 on irq 12
hdg: QUANTUM FIREBALLP AS40.0, ATA DISK drive
anticipatory scheduling elevator
ide3 at 0xb400-0xb407,0xb802 on irq 12
hda: max request size: 128KiB
hda: host protected area => 1
hda: 27067824 sectors (13859 MB) w/371KiB Cache, CHS=26853/16/63, UDMA(33)
hda: hda1 hda2 hda3 hda4 < hda5 >
hdd: max request size: 128KiB
hdd: host protected area => 1
hdd: 160086528 sectors (81964 MB) w/2048KiB Cache, CHS=158816/16/63, UDMA(33)
hdd: hdd1
hde: max request size: 128KiB
hde: host protected area => 1
hde: 78177792 sectors (40027 MB) w/1902KiB Cache, CHS=77557/16/63, UDMA(100)
hde: hde1 hde2 hde3 hde4 < hde5 >
hdg: max request size: 128KiB
hdg: host protected area => 1
hdg: 78177792 sectors (40027 MB) w/1902KiB Cache, CHS=77557/16/63, UDMA(100)
hdg: hdg1 hdg2 hdg3 hdg4 < hdg5 >
Console: switching to colour frame buffer device 80x60
drivers/usb/host/uhci-hcd.c: USB Universal Host Controller Interface driver v2.1
uhci-hcd 00:07.2: VIA Technologies, In USB
uhci-hcd 00:07.2: irq 10, io base 0000a400
Please use the 'usbfs' filetype instead, the 'usbdevfs' name is deprecated.
uhci-hcd 00:07.2: new USB bus registered, assigned bus number 1
hub 1-0:0: USB hub found
hub 1-0:0: 2 ports detected
serio: i8042 AUX port at 0x60,0x64 irq 12
input: AT Set 2 keyboard on isa0060/serio0
serio: i8042 KBD port at 0x60,0x64 irq 1
NET4: Linux TCP/IP 1.0 for NET4.0
IP: routing cache hash table of 4096 buckets, 32Kbytes
TCP: Hash tables configured (established 32768 bind 32768)
NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
found reiserfs format "3.6" with standard journal
hub 1-0:0: debounce: port 1: delay 100ms stable 4 status 0x101
hub 1-0:0: new USB device on port 1, assigned address 2
Reiserfs journal params: device hde3, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30
reiserfs: checking transaction log (hde3) for (hde3)
hub 1-1:0: USB hub found
hub 1-1:0: 4 ports detected
reiserfs: replayed 1 transactions in 0 seconds
Using r5 hash to sort names
VFS: Mounted root (reiserfs filesystem) readonly.
Freeing unused kernel memory: 112k freed
hub 1-0:0: debounce: port 2: delay 100ms stable 4 status 0x301
INIT: version 2.84 booting
hub 1-0:0: new USB device on port 2, assigned address 3
hub 1-1:0: debounce: port 1: delay 100ms stable 4 status 0x101
hub 1-1:0: new USB device on port 1, assigned address 4
hub 1-1:0: debounce: port 4: delay 100ms stable 4 status 0x101
hub 1-1:0: new USB device on port 4, assigned address 5
Loading /etc/console/boottime.kmap.gz
input: USB HID v1.00 Mouse [Microsoft Microsoft IntelliMouse® Optical] on usb-00:07.2-2
drivers/usb/core/usb.c: registered new driver hid
drivers/usb/input/hid-core.c: v2.0:USB HID core driver
drivers/usb/core/usb.c: registered new driver usbserial
drivers/usb/serial/usb-serial.c: USB Serial Dmodprobe: WARNIN<4>pl2303: Unknown symbol usb_serial_disconnect
G: Error inserting usbserial (/lpl2303: Unknowriver core v2.0
n symbol usb_serial_probe
ib/modules/2.5.70-mm1/kernel/dripl2303: Unknown symbol usb_serial_register
vers/usb/serial/usbserial.ko): Fpl2303: Unknown symbol usb_serial_deregister
ile exists
Unable to handle kernel paging request at virtual address e48ea1fc
printing eip:
c01296b9
*pde = 1fd6d067
*pte = 00000000
Oops: 0000 [#1]
CPU: 0
EIP: 0060:[<c01296b9>] Not tainted VLI
EFLAGS: 00010282
EIP is at load_module+0x7c5/0x800
eax: e48ea120 ebx: e48ea120 ecx: dffea948 edx: dffea958
esi: fffffffe edi: e48ea120 ebp: df36ff98 esp: df36ff2c
ds: 007b es: 007b ss: 0068
Process modprobe (pid: 118, threadinfo=df36e000 task=df3812d0)
Stack: df36e000 c02c321c 00000000 e48e9ae0 0000002c 0000004c 00000048 3ed3bc9b
e48d2000 e48ea120 00000000 00000000 00000000 00000000 00000008 0000000d
0000000b 00000000 00000000 00000000 00000013 00000012 e48d038c df6b7444
Call Trace:
[<c012976e>] sys_init_module+0x7a/0x240
[<c0108da7>] syscall_call+0x7/0xb
Code: 45 b8 eb 58 8b 5d b8 53 e8 d5 ea ff ff ff 73 6c 53 e8 d4 8a fe ff 83 c4 0c 8b 7d b8 ff 77 70 57 e8 c5 8a fe ff 83 c4 08 8b 45 b8 <83> b8 dc 00 00 00 00 74 08 0f 0b 61 01 59 4b 27 c0 8b 55 f0 52
Activating swap.
-----------------
putting the above Code: thru ksymoops, gives:
Code; ffffffd5 <__kernel_rt_sigreturn+1b95/????>
00000000 <_EIP>:
Code; ffffffd5 <__kernel_rt_sigreturn+1b95/????>
0: 45 inc %ebp
Code; ffffffd6 <__kernel_rt_sigreturn+1b96/????>
1: b8 eb 58 8b 5d mov $0x5d8b58eb,%eax
Code; ffffffdb <__kernel_rt_sigreturn+1b9b/????>
6: b8 53 e8 d5 ea mov $0xead5e853,%eax
Code; ffffffe0 <__kernel_rt_sigreturn+1ba0/????>
b: ff (bad)
Code; ffffffe1 <__kernel_rt_sigreturn+1ba1/????>
c: ff (bad)
Code; ffffffe2 <__kernel_rt_sigreturn+1ba2/????>
d: ff 73 6c pushl 0x6c(%ebx)
Code; ffffffe5 <__kernel_rt_sigreturn+1ba5/????>
10: 53 push %ebx
Code; ffffffe6 <__kernel_rt_sigreturn+1ba6/????>
11: e8 d4 8a fe ff call fffe8aea <_EIP+0xfffe8aea>
Code; ffffffeb <__kernel_rt_sigreturn+1bab/????>
16: 83 c4 0c add $0xc,%esp
Code; ffffffee <__kernel_rt_sigreturn+1bae/????>
19: 8b 7d b8 mov 0xffffffb8(%ebp),%edi
Code; fffffff1 <__kernel_rt_sigreturn+1bb1/????>
1c: ff 77 70 pushl 0x70(%edi)
Code; fffffff4 <__kernel_rt_sigreturn+1bb4/????>
1f: 57 push %edi
Code; fffffff5 <__kernel_rt_sigreturn+1bb5/????>
20: e8 c5 8a fe ff call fffe8aea <_EIP+0xfffe8aea>
Code; fffffffa <__kernel_rt_sigreturn+1bba/????>
25: 83 c4 08 add $0x8,%esp
Code; fffffffd <__kernel_rt_sigreturn+1bbd/????>
28: 8b 45 b8 mov 0xffffffb8(%ebp),%eax
Code; 00000000 Before first symbol
2b: 83 b8 dc 00 00 00 00 cmpl $0x0,0xdc(%eax)
Code; 00000007 Before first symbol
32: 74 08 je 3c <_EIP+0x3c>
Code; 00000009 Before first symbol
34: 0f 0b ud2a
Code; 0000000b Before first symbol
36: 61 popa
Code; 0000000c Before first symbol
37: 01 59 4b add %ebx,0x4b(%ecx)
Code; 0000000f Before first symbol
3a: 27 daa
Code; 00000010 Before first symbol
3b: c0 .byte 0xc0
Code; 00000011 Before first symbol
3c: 8b 55 f0 mov 0xfffffff0(%ebp),%edx
Code; 00000014 Before first symbol
3f: 52 push %edx
WARNING: multiple messages have this Message-ID (diff)
From: Ed Tomlinson <tomlins@cam.org>
To: Andrew Morton <akpm@digeo.com>,
linux-kernel@vger.kernel.org, linux-mm@kvack.org
Subject: Re: 2.5.70-mm1
Date: Tue, 27 May 2003 16:33:40 -0400 [thread overview]
Message-ID: <200305271633.40421.tomlins@cam.org> (raw)
In-Reply-To: <200305271238.25935.m.c.p@wolk-project.de>
Hi Andrew,
This one oops on boot 2 out of 3 tries.
Ideas?
Ed
Linux version 2.5.70-mm1 (ed@oscar) (gcc version 2.95.4 20011002 (Debian prerelease)) #1 Tue May 27 11:52:56 EDT 2003
Video mode to be used for restore is f00
BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 00000000000a0000 (usable)
BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
BIOS-e820: 0000000000100000 - 000000001fff0000 (usable)
BIOS-e820: 000000001fff0000 - 000000001fff3000 (ACPI NVS)
BIOS-e820: 000000001fff3000 - 0000000020000000 (ACPI data)
BIOS-e820: 00000000ffff0000 - 0000000100000000 (reserved)
511MB LOWMEM available.
On node 0 totalpages: 131056
DMA zone: 4096 pages, LIFO batch:1
Normal zone: 126960 pages, LIFO batch:16
HighMem zone: 0 pages, LIFO batch:1
Building zonelist for node : 0
Kernel command line: auto BOOT_IMAGE=Linux ro root=2103 console=tty0 console=ttyS0,38400 idebus=33 profile=1
ide_setup: idebus=33
kernel profiling enabled
Initializing CPU#0
PID hash table entries: 2048 (order 11: 16384 bytes)
Detected 400.974 MHz processor.
Console: colour VGA+ 80x25
Calibrating delay loop... 790.52 BogoMIPS
Memory: 512884k/524224k available (1450k kernel code, 10580k reserved, 739k data, 112k init, 0k highmem)
Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
Mount-cache hash table entries: 512 (order: 0, 4096 bytes)
-> /dev
-> /dev/console
-> /root
Enabling new style K6 write allocation for 511 Mb
CPU: L1 I Cache: 32K (32 bytes/line), D cache 32K (32 bytes/line)
CPU: L2 Cache: 256K (32 bytes/line)
CPU: AMD-K6(tm) 3D+ Processor stepping 01
Checking 'hlt' instruction... OK.
POSIX conformance testing by UNIFIX
mtrr: v2.0 (20020519)
Initializing RT netlink socket
PCI: PCI BIOS revision 2.10 entry at 0xfb520, last bus=1
PCI: Using configuration type 1
BIO: pool of 256 setup, 14Kb (56 bytes/bio)
biovec pool[0]: 1 bvecs: 256 entries (12 bytes)
biovec pool[1]: 4 bvecs: 256 entries (48 bytes)
biovec pool[2]: 16 bvecs: 256 entries (192 bytes)
biovec pool[3]: 64 bvecs: 256 entries (768 bytes)
biovec pool[4]: 128 bvecs: 256 entries (1536 bytes)
biovec pool[5]: 256 bvecs: 256 entries (3072 bytes)
Linux Plug and Play Support v0.96 (c) Adam Belay
PnPBIOS: Scanning system for PnP BIOS support...
PnPBIOS: Found PnP BIOS installation structure at 0xc00fc160
PnPBIOS: PnP BIOS version 1.0, entry 0xf0000:0xc188, dseg 0xf0000
PnPBIOS: 14 nodes reported by PnP BIOS; 14 recorded by driver
drivers/usb/core/usb.c: registered new driver usbfs
drivers/usb/core/usb.c: registered new driver hub
PCI: Probing PCI hardware
PCI: Probing PCI hardware (bus 00)
PCI: Using IRQ router VIA [1106/0586] at 00:07.0
Initializing Cryptographic API
Activating ISA DMA hang workarounds.
isapnp: Scanning for PnP cards...
isapnp: No Plug & Play device found
radeonfb_pci_register BEGIN
radeonfb: ref_clk=2700, ref_div=60, xclk=15500 from BIOS
radeonfb: probed DDR SGRAM 65536k videoram
radeonfb: ATI Radeon VE QY DDR SGRAM 64 MB
radeonfb: DVI port no monitor connected
radeonfb: CRT port CRT monitor connected
radeonfb_pci_register END
hStart = 664, hEnd = 760, hTotal = 800
vStart = 491, vEnd = 493, vTotal = 525
h_total_disp = 0x4f0063 hsync_strt_wid = 0x8c02a2
v_total_disp = 0x1df020c vsync_strt_wid = 0x8201ea
post div = 0x8
fb_div = 0x1bf
ppll_div_3 = 0x301bf
ron = 1040, roff = 22092
vclk_freq = 2514, per = 789
Console: switching to colour frame buffer device 80x60
pty: 256 Unix98 ptys configured
Linux agpgart interface v0.100 (c) Dave Jones
agpgart: Detected VIA MVP3 chipset
agpgart: Maximum main memory to use for agp memory: 439M
agpgart: AGP aperture is 64M @ 0xe8000000
[drm] Initialized radeon 1.8.0 20020828 on minor 0
Serial: 8250/16550 driver $Revision: 1.90 $ IRQ sharing disabled
ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
ttyS2 at I/O 0x3e8 (irq = 4) is a 16550A
Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
ide: Assuming 33MHz system bus speed for PIO modes
VP_IDE: IDE controller at PCI slot 00:07.1
VP_IDE: chipset revision 6
VP_IDE: not 100% native mode: will probe irqs later
VP_IDE: VIA vt82c586b (rev 47) IDE UDMA33 controller on pci00:07.1
ide0: BM-DMA at 0xa000-0xa007, BIOS settings: hda:DMA, hdb:DMA
ide1: BM-DMA at 0xa008-0xa00f, BIOS settings: hdc:DMA, hdd:DMA
hda: QUANTUM FIREBALLP KA13.6, ATA DISK drive
anticipatory scheduling elevator
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
hdc: AOPEN 16XDVD-ROM/AMH 20020328, ATAPI CD/DVD-ROM drive
hdd: Maxtor 6Y080L0, ATA DISK drive
anticipatory scheduling elevator
anticipatory scheduling elevator
ide1 at 0x170-0x177,0x376 on irq 15
PDC20267: IDE controller at PCI slot 00:09.0
PCI: Found IRQ 12 for device 00:09.0
PDC20267: chipset revision 2
PDC20267: not 100% native mode: will probe irqs later
PDC20267: ROM enabled at 0xef000000
PDC20267: (U)DMA Burst Bit ENABLED Primary PCI Mode Secondary PCI Mode.
ide2: BM-DMA at 0xbc00-0xbc07, BIOS settings: hde:DMA, hdf:pio
ide3: BM-DMA at 0xbc08-0xbc0f, BIOS settings: hdg:DMA, hdh:DMA
hde: QUANTUM FIREBALLP AS40.0, ATA DISK drive
anticipatory scheduling elevator
ide2 at 0xac00-0xac07,0xb002 on irq 12
hdg: QUANTUM FIREBALLP AS40.0, ATA DISK drive
anticipatory scheduling elevator
ide3 at 0xb400-0xb407,0xb802 on irq 12
hda: max request size: 128KiB
hda: host protected area => 1
hda: 27067824 sectors (13859 MB) w/371KiB Cache, CHS=26853/16/63, UDMA(33)
hda: hda1 hda2 hda3 hda4 < hda5 >
hdd: max request size: 128KiB
hdd: host protected area => 1
hdd: 160086528 sectors (81964 MB) w/2048KiB Cache, CHS=158816/16/63, UDMA(33)
hdd: hdd1
hde: max request size: 128KiB
hde: host protected area => 1
hde: 78177792 sectors (40027 MB) w/1902KiB Cache, CHS=77557/16/63, UDMA(100)
hde: hde1 hde2 hde3 hde4 < hde5 >
hdg: max request size: 128KiB
hdg: host protected area => 1
hdg: 78177792 sectors (40027 MB) w/1902KiB Cache, CHS=77557/16/63, UDMA(100)
hdg: hdg1 hdg2 hdg3 hdg4 < hdg5 >
Console: switching to colour frame buffer device 80x60
drivers/usb/host/uhci-hcd.c: USB Universal Host Controller Interface driver v2.1
uhci-hcd 00:07.2: VIA Technologies, In USB
uhci-hcd 00:07.2: irq 10, io base 0000a400
Please use the 'usbfs' filetype instead, the 'usbdevfs' name is deprecated.
uhci-hcd 00:07.2: new USB bus registered, assigned bus number 1
hub 1-0:0: USB hub found
hub 1-0:0: 2 ports detected
serio: i8042 AUX port at 0x60,0x64 irq 12
input: AT Set 2 keyboard on isa0060/serio0
serio: i8042 KBD port at 0x60,0x64 irq 1
NET4: Linux TCP/IP 1.0 for NET4.0
IP: routing cache hash table of 4096 buckets, 32Kbytes
TCP: Hash tables configured (established 32768 bind 32768)
NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
found reiserfs format "3.6" with standard journal
hub 1-0:0: debounce: port 1: delay 100ms stable 4 status 0x101
hub 1-0:0: new USB device on port 1, assigned address 2
Reiserfs journal params: device hde3, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30
reiserfs: checking transaction log (hde3) for (hde3)
hub 1-1:0: USB hub found
Using r5 hash to sort names
VFS: Mounted root (reiserfs filesystem) readonly.
hub 1-1:0: 4 ports detected
Freeing unused kernel memory: 112k freed
hub 1-0:0: debounce: port 2: delay 100ms stable 4 status 0x301
INIT: version 2.84 booting
hub 1-0:0: new USB device on port 2, assigned address 3
hub 1-1:0: debounce: port 1: delay 100ms stable 4 status 0x101
hub 1-1:0: new USB device on port 1, assigned address 4
hub 1-1:0: debounce: port 4: delay 100ms stable 4 status 0x101
hub 1-1:0: new USB device on port 4, assigned address 5
Loading /etc/console/boottime.kmap.gz
input: USB HID v1.00 Mouse [Microsoft Microsoft IntelliMouse(R) Optical] on usb-00:07.2-2
drivers/usb/core/usb.c: registered new driver hid
SCSI subsystem initialized
Initializing USB Mass Storage driver...
drivers/usb/input/hid-core.c: v2.0:USB HID core driver
scsi0 : SCSI emulation for USB Mass Storage devices
anticipatory scheduling elevator
Vendor: Sandisk Model: ImageMate SDDR-0 Rev: 0208
Type: Direct-Access ANSI SCSI revision: 02
anticipatory scheduling elevator
anticipatory scheduling elevator
mice: PS/2 mouse device common for all mice
anticipatory scheduling elevator
anticipatory scheduling elevator
modprobe: WARNINpl2303: Unknown symbol usb_serial_disconnect
G: Error inserting usbserial (/lpl2303: Unknown symbol usb_serial_probe
ib/modules/2.5.70-mm1/kernel/drianticipatory scheduling elevator
vers/usb/serial/usbserial.ko): Fanticipatory scheduling elevator
ile exists
anticipatory scheduling elevator
drivers/usb/core/usb.c: registered new driver usbserial
drivers/usb/serial/usb-serial.c: USB Serial Driver core v2.0
drivers/usb/core/usb.c: registered new driver usb-storage
USB Mass Storage support registered.
pl2303: Unknown symbol usb_serial_register
pl2303: Unknown symbol usb_serial_deregister
Unable to handle kernel paging request at virtual address e48e11fc
printing eip:
c01296b9
*pde = 1fd6d067
*pte = 00000000
Oops: 0000 [#1]
CPU: 0
EIP: 0060:[<c01296b9>] Not tainted VLI
EFLAGS: 00010282
EIP is at load_module+0x7c5/0x800
eax: e48e1120 ebx: e48e1120 ecx: dffea948 edx: dffea958
esi: fffffffe edi: e48e1120 ebp: df3aff98 esp: df3aff2c
ds: 007b es: 007b ss: 0068
Process modprobe (pid: 128, threadinfo=df3ae000 task=df3d12d0)
Stack: df3ae000 c02c321c 00000000 e48e0ae0 0000002c 0000004c 00000048 3ed3bc9b
e48d0000 e48e1120 00000000 00000000 00000000 00000000 00000008 0000000d
0000000b 00000000 00000000 00000000 00000013 00000012 e48ef38c df76eb7c
Call Trace:
[<c012976e>] sys_init_module+0x7a/0x240
[<c0108da7>] syscall_call+0x7/0xb
Code: 45 b8 eb 58 8b 5d b8 53 e8 d5 ea ff ff ff 73 6c 53 e8 d4 8a fe ff 83 c4 0c 8b 7d b8 ff 77 70 57 e8 c5 8a fe ff 83 c4 08 8b 45 b8 <83> b8 dc 00 00 00 00 74 08 0f 0b 61 01 59 4b 27 c0 8b 55 f0 52
Activating swap.
<6>Adding 393552k swap on /dev/hda1. Priority:1 extents:1
Adding 393584k swap on /dev/hde1. Priority:1 extents:1
Adding 393584k swap on /dev/hdg1. Priority:1 extents:1
modprobe: FATAL: Module rtc not found.
System time was Tue May 27 19:43:14 UTC 2003.
Setting the System Clock using the Hardware Clock as reference...
modprobe: FATAL: Module rtc not found.
modprobe: FATAL: Module rtc not found.
System Clock set. System local time is now Tue May 27 15:43:16 EDT 2003.
Running 0dns-down to make sure resolv.conf is ok...done.
Loading modules: tulipwarning: process `update' used the obsolete bdflush system call
Fix your initscripts?
Linux version 2.5.70-mm1 (ed@oscar) (gcc version 2.95.4 20011002 (Debian prerelease)) #1 Tue May 27 11:52:56 EDT 2003
Video mode to be used for restore is f00
BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 00000000000a0000 (usable)
BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
BIOS-e820: 0000000000100000 - 000000001fff0000 (usable)
BIOS-e820: 000000001fff0000 - 000000001fff3000 (ACPI NVS)
BIOS-e820: 000000001fff3000 - 0000000020000000 (ACPI data)
BIOS-e820: 00000000ffff0000 - 0000000100000000 (reserved)
511MB LOWMEM available.
On node 0 totalpages: 131056
DMA zone: 4096 pages, LIFO batch:1
Normal zone: 126960 pages, LIFO batch:16
HighMem zone: 0 pages, LIFO batch:1
Building zonelist for node : 0
Kernel command line: auto BOOT_IMAGE=Linux ro root=2103 console=tty0 console=ttyS0,38400 idebus=33 profile=1
ide_setup: idebus=33
kernel profiling enabled
Initializing CPU#0
PID hash table entries: 2048 (order 11: 16384 bytes)
Detected 400.936 MHz processor.
Console: colour VGA+ 80x25
Calibrating delay loop... 790.52 BogoMIPS
Memory: 512884k/524224k available (1450k kernel code, 10580k reserved, 739k data, 112k init, 0k highmem)
Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
Mount-cache hash table entries: 512 (order: 0, 4096 bytes)
-> /dev
-> /dev/console
-> /root
Enabling new style K6 write allocation for 511 Mb
CPU: L1 I Cache: 32K (32 bytes/line), D cache 32K (32 bytes/line)
CPU: L2 Cache: 256K (32 bytes/line)
CPU: AMD-K6(tm) 3D+ Processor stepping 01
Checking 'hlt' instruction... OK.
POSIX conformance testing by UNIFIX
mtrr: v2.0 (20020519)
Initializing RT netlink socket
PCI: PCI BIOS revision 2.10 entry at 0xfb520, last bus=1
PCI: Using configuration type 1
BIO: pool of 256 setup, 14Kb (56 bytes/bio)
biovec pool[0]: 1 bvecs: 256 entries (12 bytes)
biovec pool[1]: 4 bvecs: 256 entries (48 bytes)
biovec pool[2]: 16 bvecs: 256 entries (192 bytes)
biovec pool[3]: 64 bvecs: 256 entries (768 bytes)
biovec pool[4]: 128 bvecs: 256 entries (1536 bytes)
biovec pool[5]: 256 bvecs: 256 entries (3072 bytes)
Linux Plug and Play Support v0.96 (c) Adam Belay
PnPBIOS: Scanning system for PnP BIOS support...
PnPBIOS: Found PnP BIOS installation structure at 0xc00fc160
PnPBIOS: PnP BIOS version 1.0, entry 0xf0000:0xc188, dseg 0xf0000
PnPBIOS: 14 nodes reported by PnP BIOS; 14 recorded by driver
drivers/usb/core/usb.c: registered new driver usbfs
drivers/usb/core/usb.c: registered new driver hub
PCI: Probing PCI hardware
PCI: Probing PCI hardware (bus 00)
PCI: Using IRQ router VIA [1106/0586] at 00:07.0
Initializing Cryptographic API
Activating ISA DMA hang workarounds.
isapnp: Scanning for PnP cards...
isapnp: No Plug & Play device found
radeonfb_pci_register BEGIN
radeonfb: ref_clk=2700, ref_div=60, xclk=15500 from BIOS
radeonfb: probed DDR SGRAM 65536k videoram
radeonfb: ATI Radeon VE QY DDR SGRAM 64 MB
radeonfb: DVI port no monitor connected
radeonfb: CRT port CRT monitor connected
radeonfb_pci_register END
hStart = 664, hEnd = 760, hTotal = 800
vStart = 491, vEnd = 493, vTotal = 525
h_total_disp = 0x4f0063 hsync_strt_wid = 0x8c02a2
v_total_disp = 0x1df020c vsync_strt_wid = 0x8201ea
post div = 0x8
fb_div = 0x1bf
ppll_div_3 = 0x301bf
ron = 1040, roff = 22092
vclk_freq = 2514, per = 789
Console: switching to colour frame buffer device 80x60
pty: 256 Unix98 ptys configured
Linux agpgart interface v0.100 (c) Dave Jones
agpgart: Detected VIA MVP3 chipset
agpgart: Maximum main memory to use for agp memory: 439M
agpgart: AGP aperture is 64M @ 0xe8000000
[drm] Initialized radeon 1.8.0 20020828 on minor 0
Serial: 8250/16550 driver $Revision: 1.90 $ IRQ sharing disabled
ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
ttyS2 at I/O 0x3e8 (irq = 4) is a 16550A
Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
ide: Assuming 33MHz system bus speed for PIO modes
VP_IDE: IDE controller at PCI slot 00:07.1
VP_IDE: chipset revision 6
VP_IDE: not 100% native mode: will probe irqs later
VP_IDE: VIA vt82c586b (rev 47) IDE UDMA33 controller on pci00:07.1
ide0: BM-DMA at 0xa000-0xa007, BIOS settings: hda:DMA, hdb:DMA
ide1: BM-DMA at 0xa008-0xa00f, BIOS settings: hdc:DMA, hdd:DMA
hda: QUANTUM FIREBALLP KA13.6, ATA DISK drive
anticipatory scheduling elevator
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
hdc: AOPEN 16XDVD-ROM/AMH 20020328, ATAPI CD/DVD-ROM drive
hdd: Maxtor 6Y080L0, ATA DISK drive
anticipatory scheduling elevator
anticipatory scheduling elevator
ide1 at 0x170-0x177,0x376 on irq 15
PDC20267: IDE controller at PCI slot 00:09.0
PCI: Found IRQ 12 for device 00:09.0
PDC20267: chipset revision 2
PDC20267: not 100% native mode: will probe irqs later
PDC20267: ROM enabled at 0xef000000
PDC20267: (U)DMA Burst Bit ENABLED Primary PCI Mode Secondary PCI Mode.
ide2: BM-DMA at 0xbc00-0xbc07, BIOS settings: hde:DMA, hdf:pio
ide3: BM-DMA at 0xbc08-0xbc0f, BIOS settings: hdg:DMA, hdh:DMA
hde: QUANTUM FIREBALLP AS40.0, ATA DISK drive
anticipatory scheduling elevator
ide2 at 0xac00-0xac07,0xb002 on irq 12
hdg: QUANTUM FIREBALLP AS40.0, ATA DISK drive
anticipatory scheduling elevator
ide3 at 0xb400-0xb407,0xb802 on irq 12
hda: max request size: 128KiB
hda: host protected area => 1
hda: 27067824 sectors (13859 MB) w/371KiB Cache, CHS=26853/16/63, UDMA(33)
hda: hda1 hda2 hda3 hda4 < hda5 >
hdd: max request size: 128KiB
hdd: host protected area => 1
hdd: 160086528 sectors (81964 MB) w/2048KiB Cache, CHS=158816/16/63, UDMA(33)
hdd: hdd1
hde: max request size: 128KiB
hde: host protected area => 1
hde: 78177792 sectors (40027 MB) w/1902KiB Cache, CHS=77557/16/63, UDMA(100)
hde: hde1 hde2 hde3 hde4 < hde5 >
hdg: max request size: 128KiB
hdg: host protected area => 1
hdg: 78177792 sectors (40027 MB) w/1902KiB Cache, CHS=77557/16/63, UDMA(100)
hdg: hdg1 hdg2 hdg3 hdg4 < hdg5 >
Console: switching to colour frame buffer device 80x60
drivers/usb/host/uhci-hcd.c: USB Universal Host Controller Interface driver v2.1
uhci-hcd 00:07.2: VIA Technologies, In USB
uhci-hcd 00:07.2: irq 10, io base 0000a400
Please use the 'usbfs' filetype instead, the 'usbdevfs' name is deprecated.
uhci-hcd 00:07.2: new USB bus registered, assigned bus number 1
hub 1-0:0: USB hub found
hub 1-0:0: 2 ports detected
serio: i8042 AUX port at 0x60,0x64 irq 12
input: AT Set 2 keyboard on isa0060/serio0
serio: i8042 KBD port at 0x60,0x64 irq 1
NET4: Linux TCP/IP 1.0 for NET4.0
IP: routing cache hash table of 4096 buckets, 32Kbytes
TCP: Hash tables configured (established 32768 bind 32768)
NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
found reiserfs format "3.6" with standard journal
hub 1-0:0: debounce: port 1: delay 100ms stable 4 status 0x101
hub 1-0:0: new USB device on port 1, assigned address 2
Reiserfs journal params: device hde3, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30
reiserfs: checking transaction log (hde3) for (hde3)
hub 1-1:0: USB hub found
hub 1-1:0: 4 ports detected
reiserfs: replayed 1 transactions in 0 seconds
Using r5 hash to sort names
VFS: Mounted root (reiserfs filesystem) readonly.
Freeing unused kernel memory: 112k freed
hub 1-0:0: debounce: port 2: delay 100ms stable 4 status 0x301
INIT: version 2.84 booting
hub 1-0:0: new USB device on port 2, assigned address 3
hub 1-1:0: debounce: port 1: delay 100ms stable 4 status 0x101
hub 1-1:0: new USB device on port 1, assigned address 4
hub 1-1:0: debounce: port 4: delay 100ms stable 4 status 0x101
hub 1-1:0: new USB device on port 4, assigned address 5
Loading /etc/console/boottime.kmap.gz
input: USB HID v1.00 Mouse [Microsoft Microsoft IntelliMouse(R) Optical] on usb-00:07.2-2
drivers/usb/core/usb.c: registered new driver hid
drivers/usb/input/hid-core.c: v2.0:USB HID core driver
drivers/usb/core/usb.c: registered new driver usbserial
drivers/usb/serial/usb-serial.c: USB Serial Dmodprobe: WARNIN<4>pl2303: Unknown symbol usb_serial_disconnect
G: Error inserting usbserial (/lpl2303: Unknowriver core v2.0
n symbol usb_serial_probe
ib/modules/2.5.70-mm1/kernel/dripl2303: Unknown symbol usb_serial_register
vers/usb/serial/usbserial.ko): Fpl2303: Unknown symbol usb_serial_deregister
ile exists
Unable to handle kernel paging request at virtual address e48ea1fc
printing eip:
c01296b9
*pde = 1fd6d067
*pte = 00000000
Oops: 0000 [#1]
CPU: 0
EIP: 0060:[<c01296b9>] Not tainted VLI
EFLAGS: 00010282
EIP is at load_module+0x7c5/0x800
eax: e48ea120 ebx: e48ea120 ecx: dffea948 edx: dffea958
esi: fffffffe edi: e48ea120 ebp: df36ff98 esp: df36ff2c
ds: 007b es: 007b ss: 0068
Process modprobe (pid: 118, threadinfo=df36e000 task=df3812d0)
Stack: df36e000 c02c321c 00000000 e48e9ae0 0000002c 0000004c 00000048 3ed3bc9b
e48d2000 e48ea120 00000000 00000000 00000000 00000000 00000008 0000000d
0000000b 00000000 00000000 00000000 00000013 00000012 e48d038c df6b7444
Call Trace:
[<c012976e>] sys_init_module+0x7a/0x240
[<c0108da7>] syscall_call+0x7/0xb
Code: 45 b8 eb 58 8b 5d b8 53 e8 d5 ea ff ff ff 73 6c 53 e8 d4 8a fe ff 83 c4 0c 8b 7d b8 ff 77 70 57 e8 c5 8a fe ff 83 c4 08 8b 45 b8 <83> b8 dc 00 00 00 00 74 08 0f 0b 61 01 59 4b 27 c0 8b 55 f0 52
Activating swap.
-----------------
putting the above Code: thru ksymoops, gives:
Code; ffffffd5 <__kernel_rt_sigreturn+1b95/????>
00000000 <_EIP>:
Code; ffffffd5 <__kernel_rt_sigreturn+1b95/????>
0: 45 inc %ebp
Code; ffffffd6 <__kernel_rt_sigreturn+1b96/????>
1: b8 eb 58 8b 5d mov $0x5d8b58eb,%eax
Code; ffffffdb <__kernel_rt_sigreturn+1b9b/????>
6: b8 53 e8 d5 ea mov $0xead5e853,%eax
Code; ffffffe0 <__kernel_rt_sigreturn+1ba0/????>
b: ff (bad)
Code; ffffffe1 <__kernel_rt_sigreturn+1ba1/????>
c: ff (bad)
Code; ffffffe2 <__kernel_rt_sigreturn+1ba2/????>
d: ff 73 6c pushl 0x6c(%ebx)
Code; ffffffe5 <__kernel_rt_sigreturn+1ba5/????>
10: 53 push %ebx
Code; ffffffe6 <__kernel_rt_sigreturn+1ba6/????>
11: e8 d4 8a fe ff call fffe8aea <_EIP+0xfffe8aea>
Code; ffffffeb <__kernel_rt_sigreturn+1bab/????>
16: 83 c4 0c add $0xc,%esp
Code; ffffffee <__kernel_rt_sigreturn+1bae/????>
19: 8b 7d b8 mov 0xffffffb8(%ebp),%edi
Code; fffffff1 <__kernel_rt_sigreturn+1bb1/????>
1c: ff 77 70 pushl 0x70(%edi)
Code; fffffff4 <__kernel_rt_sigreturn+1bb4/????>
1f: 57 push %edi
Code; fffffff5 <__kernel_rt_sigreturn+1bb5/????>
20: e8 c5 8a fe ff call fffe8aea <_EIP+0xfffe8aea>
Code; fffffffa <__kernel_rt_sigreturn+1bba/????>
25: 83 c4 08 add $0x8,%esp
Code; fffffffd <__kernel_rt_sigreturn+1bbd/????>
28: 8b 45 b8 mov 0xffffffb8(%ebp),%eax
Code; 00000000 Before first symbol
2b: 83 b8 dc 00 00 00 00 cmpl $0x0,0xdc(%eax)
Code; 00000007 Before first symbol
32: 74 08 je 3c <_EIP+0x3c>
Code; 00000009 Before first symbol
34: 0f 0b ud2a
Code; 0000000b Before first symbol
36: 61 popa
Code; 0000000c Before first symbol
37: 01 59 4b add %ebx,0x4b(%ecx)
Code; 0000000f Before first symbol
3a: 27 daa
Code; 00000010 Before first symbol
3b: c0 .byte 0xc0
Code; 00000011 Before first symbol
3c: 8b 55 f0 mov 0xfffffff0(%ebp),%edx
Code; 00000014 Before first symbol
3f: 52 push %edx
--
To unsubscribe, send a message with 'unsubscribe linux-mm' in
the body to majordomo@kvack.org. For more info on Linux MM,
see: http://www.linux-mm.org/ .
Don't email: <a href=mailto:"aart@kvack.org"> aart@kvack.org </a>
next prev parent reply other threads:[~2003-05-27 20:20 UTC|newest]
Thread overview: 32+ messages / expand[flat|nested] mbox.gz Atom feed top
2003-05-27 7:42 2.5.70-mm1 Andrew Morton
2003-05-27 7:42 ` 2.5.70-mm1 Andrew Morton
2003-05-27 10:38 ` 2.5.70-mm1 Marc-Christian Petersen
2003-05-27 10:38 ` 2.5.70-mm1 Marc-Christian Petersen
2003-05-27 20:33 ` Ed Tomlinson [this message]
2003-05-27 20:33 ` 2.5.70-mm1 Ed Tomlinson
2003-05-27 20:49 ` 2.5.70-mm1 Andrew Morton
2003-05-27 20:49 ` 2.5.70-mm1 Andrew Morton
2003-05-27 23:05 ` 2.5.70-mm1 Ed Tomlinson
2003-05-27 23:05 ` 2.5.70-mm1 Ed Tomlinson
2003-05-28 17:10 ` 2.5.70-mm1 Mingming Cao
2003-05-28 17:10 ` 2.5.70-mm1 Mingming Cao
2003-05-28 19:44 ` 2.5.70-mm1 Andrew Morton
2003-05-28 19:44 ` 2.5.70-mm1 Andrew Morton
2003-05-29 6:23 ` 2.5.70-mm1 Martin J. Bligh
2003-05-29 6:23 ` 2.5.70-mm1 Martin J. Bligh
2003-05-29 18:40 ` 2.5.70-mm1 Martin J. Bligh
2003-05-29 18:40 ` 2.5.70-mm1 Martin J. Bligh
2003-05-29 18:52 ` 2.5.70-mm1 Andrew Morton
2003-05-29 18:52 ` 2.5.70-mm1 Andrew Morton
2003-05-29 20:30 ` 2.5.70-mm1 Martin J. Bligh
2003-05-29 20:30 ` 2.5.70-mm1 Martin J. Bligh
2003-05-29 21:14 ` 2.5.70-mm1 Andrew Morton
2003-05-29 21:14 ` 2.5.70-mm1 Andrew Morton
2003-05-30 15:51 ` 2.5.70-mm1 Martin J. Bligh
2003-05-30 16:43 ` 2.5.70-mm1 Andrew Morton
2003-05-30 16:43 ` 2.5.70-mm1 Andrew Morton
2003-05-30 23:51 ` 2.5.70-mm1 Martin J. Bligh
2003-05-30 23:51 ` 2.5.70-mm1 Martin J. Bligh
2003-06-03 6:34 ` ext3 semaphore tracing Martin J. Bligh
2003-06-03 6:34 ` Martin J. Bligh
-- strict thread matches above, loose matches on Subject: below --
2003-05-28 13:26 2.5.70-mm1 Downing, Thomas
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=200305271633.40421.tomlins@cam.org \
--to=tomlins@cam.org \
--cc=akpm@digeo.com \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-mm@kvack.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.