* i2c-isa
2005-05-19 6:24 i2c-isa Victor G. Marimon
@ 2005-05-19 6:24 ` Jean Delvare
2005-05-19 6:24 ` i2c-isa Victor G. Marimon
` (8 subsequent siblings)
9 siblings, 0 replies; 11+ messages in thread
From: Jean Delvare @ 2005-05-19 6:24 UTC (permalink / raw)
To: lm-sensors
> > It most probably has. Run "depmod -ae" (as root) to update your
> > module dependencies, and your system will see the file again.
>
>
> no, when doing 'make;: make install' for i2c-2.7.0 dont compile
> any
> i2c-isa, where i can get it?
It really has to be there. If you can't find it, please send us a
complete log of what happens when you run "make" (preferably after a
"make clean".) We'll be helpless without that. (We can't just *guess*
what your problem is.)
--
Jean Delvare
http://www.ensicaen.ismra.fr/~delvare/
^ permalink raw reply [flat|nested] 11+ messages in thread* i2c-isa
2005-05-19 6:24 i2c-isa Victor G. Marimon
2005-05-19 6:24 ` i2c-isa Jean Delvare
@ 2005-05-19 6:24 ` Victor G. Marimon
2005-05-19 6:24 ` i2c-isa Mark Studebaker
` (7 subsequent siblings)
9 siblings, 0 replies; 11+ messages in thread
From: Victor G. Marimon @ 2005-05-19 6:24 UTC (permalink / raw)
To: lm-sensors
>
> > Hi, sorry for my questions but, i compiled and installed i2c-2.7.0 and
> > dont install i2c-isa.o....
> >
> > Thx
>
> It most probably has. Run "depmod -ae" (as root) to update your module
> dependencies, and your system will see the file again.
no, when doing 'make;: make install' for i2c-2.7.0 dont compile any
i2c-isa, where i can get it?
^ permalink raw reply [flat|nested] 11+ messages in thread* i2c-isa
2005-05-19 6:24 i2c-isa Victor G. Marimon
2005-05-19 6:24 ` i2c-isa Jean Delvare
2005-05-19 6:24 ` i2c-isa Victor G. Marimon
@ 2005-05-19 6:24 ` Mark Studebaker
2005-05-19 6:24 ` i2c-isa Victor G. Marimon
` (6 subsequent siblings)
9 siblings, 0 replies; 11+ messages in thread
From: Mark Studebaker @ 2005-05-19 6:24 UTC (permalink / raw)
To: lm-sensors
i2c-isa is in lm_sensors-2.7.0, not i2c-2.7.0.
Jean Delvare wrote:
>
> > > It most probably has. Run "depmod -ae" (as root) to update your
> > > module dependencies, and your system will see the file again.
> >
> >
> > no, when doing 'make;: make install' for i2c-2.7.0 dont compile
> > any
> > i2c-isa, where i can get it?
>
> It really has to be there. If you can't find it, please send us a
> complete log of what happens when you run "make" (preferably after a
> "make clean".) We'll be helpless without that. (We can't just *guess*
> what your problem is.)
>
> --
> Jean Delvare
> http://www.ensicaen.ismra.fr/~delvare/
^ permalink raw reply [flat|nested] 11+ messages in thread* i2c-isa
2005-05-19 6:24 i2c-isa Victor G. Marimon
` (2 preceding siblings ...)
2005-05-19 6:24 ` i2c-isa Mark Studebaker
@ 2005-05-19 6:24 ` Victor G. Marimon
2005-05-19 6:24 ` i2c-isa Jean Delvare
` (5 subsequent siblings)
9 siblings, 0 replies; 11+ messages in thread
From: Victor G. Marimon @ 2005-05-19 6:24 UTC (permalink / raw)
To: lm-sensors
>
> > sorry, but in the packet i2c-2.7.0.tar.gz don't exist i2c-isa.c,
> > is
> > normal? where's the source of i2c-isa.o? from kernel or from i2c
> > packet?
>
> I2c-isa is actually part of lm_sensors-2.7.0, not i2c-2.7.0 (sorry I
> missed that at first).
ok, trying to compile lmsensors with Makefile patch and
etc/config.in patch breaks with:
sed -e 's@^\(.*\)\.o:@kernel/busses/i2c-ali1535.d
kernel/busses/i2c-ali1535.o: Makefile '`dirname
kernel/busses/i2c-ali1535.d`/Module.mk' @' > kernel/busses/i2c-ali1535.d
make: *** No hay ninguna regla para construir el objetivo `stdarg.h',
necesario para `kernel/chips/vt1211.d'. Alto.
in english: no target to rule to build 'stdarg.h'
^ permalink raw reply [flat|nested] 11+ messages in thread* i2c-isa
2005-05-19 6:24 i2c-isa Victor G. Marimon
` (3 preceding siblings ...)
2005-05-19 6:24 ` i2c-isa Victor G. Marimon
@ 2005-05-19 6:24 ` Jean Delvare
2005-05-19 6:24 ` i2c-isa Jean Delvare
` (4 subsequent siblings)
9 siblings, 0 replies; 11+ messages in thread
From: Jean Delvare @ 2005-05-19 6:24 UTC (permalink / raw)
To: lm-sensors
> sorry, but in the packet i2c-2.7.0.tar.gz don't exist i2c-isa.c,
> is
> normal? where's the source of i2c-isa.o? from kernel or from i2c
> packet?
I2c-isa is actually part of lm_sensors-2.7.0, not i2c-2.7.0 (sorry I
missed that at first).
--
Jean Delvare
http://www.ensicaen.ismra.fr/~delvare/
^ permalink raw reply [flat|nested] 11+ messages in thread* i2c-isa
2005-05-19 6:24 i2c-isa Victor G. Marimon
` (4 preceding siblings ...)
2005-05-19 6:24 ` i2c-isa Jean Delvare
@ 2005-05-19 6:24 ` Jean Delvare
2005-05-19 6:24 ` i2c-isa Victor G. Marimon
` (3 subsequent siblings)
9 siblings, 0 replies; 11+ messages in thread
From: Jean Delvare @ 2005-05-19 6:24 UTC (permalink / raw)
To: lm-sensors
> Hi, sorry for my questions but, i compiled and installed i2c-2.7.0 and
> dont install i2c-isa.o....
>
> Thx
It most probably has. Run "depmod -ae" (as root) to update your module
dependencies, and your system will see the file again.
--
Jean Delvare
http://www.ensicaen.ismra.fr/~delvare/
^ permalink raw reply [flat|nested] 11+ messages in thread* i2c-isa
2005-05-19 6:24 i2c-isa Victor G. Marimon
` (5 preceding siblings ...)
2005-05-19 6:24 ` i2c-isa Jean Delvare
@ 2005-05-19 6:24 ` Victor G. Marimon
2005-05-19 6:24 ` i2c-isa Jean Delvare
` (2 subsequent siblings)
9 siblings, 0 replies; 11+ messages in thread
From: Victor G. Marimon @ 2005-05-19 6:24 UTC (permalink / raw)
To: lm-sensors
>
> > ok, trying to compile lmsensors with Makefile patch and
> > etc/config.in patch breaks with:
> >
> >
> > sed -e 's@^\(.*\)\.o:@kernel/busses/i2c-ali1535.d
> > kernel/busses/i2c-ali1535.o: Makefile '`dirname
> > kernel/busses/i2c-ali1535.d`/Module.mk' @' >
> > kernel/busses/i2c-ali1535.d make: *** No hay ninguna regla para
> > construir el objetivo `stdarg.h', necesario para
> > `kernel/chips/vt1211.d'. Alto.
> >
> >
> > in english: no target to rule to build 'stdarg.h'
>
> You must have locales set (check with "locale"). Try "export LC_ALL=C"
> before runing "make".
>
> A better fix will be commited before 2.8.0 is released.
>
ok thx, now compile fine, but don't install sensors-detect. but
is in prog.
^ permalink raw reply [flat|nested] 11+ messages in thread* i2c-isa
2005-05-19 6:24 i2c-isa Victor G. Marimon
` (6 preceding siblings ...)
2005-05-19 6:24 ` i2c-isa Victor G. Marimon
@ 2005-05-19 6:24 ` Jean Delvare
2005-05-19 6:24 ` i2c-isa Victor G. Marimon
2005-05-19 6:24 ` i2c-isa Jean Delvare
9 siblings, 0 replies; 11+ messages in thread
From: Jean Delvare @ 2005-05-19 6:24 UTC (permalink / raw)
To: lm-sensors
> ok thx, now compile fine, but don't install
> sensors-detect. but is in prog.
Sensors-detect will be installed in /usr/local/sbin/ by make install. By
the way, you'd be welcome to express yourself in full english sentences.
Thanks.
--
Jean Delvare
http://www.ensicaen.ismra.fr/~delvare/
^ permalink raw reply [flat|nested] 11+ messages in thread* i2c-isa
2005-05-19 6:24 i2c-isa Victor G. Marimon
` (7 preceding siblings ...)
2005-05-19 6:24 ` i2c-isa Jean Delvare
@ 2005-05-19 6:24 ` Victor G. Marimon
2005-05-19 6:24 ` i2c-isa Jean Delvare
9 siblings, 0 replies; 11+ messages in thread
From: Victor G. Marimon @ 2005-05-19 6:24 UTC (permalink / raw)
To: lm-sensors
>
> > > It most probably has. Run "depmod -ae" (as root) to update your
> > > module dependencies, and your system will see the file again.
> >
> >
> > no, when doing 'make;: make install' for i2c-2.7.0 dont compile
> > any
> > i2c-isa, where i can get it?
>
> It really has to be there. If you can't find it, please send us a
> complete log of what happens when you run "make" (preferably after a
> "make clean".) We'll be helpless without that. (We can't just *guess*
> what your problem is.)
sorry, but in the packet i2c-2.7.0.tar.gz don't exist i2c-isa.c, is
normal? where's the source of i2c-isa.o? from kernel or from i2c packet?
^ permalink raw reply [flat|nested] 11+ messages in thread* i2c-isa
2005-05-19 6:24 i2c-isa Victor G. Marimon
` (8 preceding siblings ...)
2005-05-19 6:24 ` i2c-isa Victor G. Marimon
@ 2005-05-19 6:24 ` Jean Delvare
9 siblings, 0 replies; 11+ messages in thread
From: Jean Delvare @ 2005-05-19 6:24 UTC (permalink / raw)
To: lm-sensors
> ok, trying to compile lmsensors with Makefile patch and
> etc/config.in patch breaks with:
>
>
> sed -e 's@^\(.*\)\.o:@kernel/busses/i2c-ali1535.d
> kernel/busses/i2c-ali1535.o: Makefile '`dirname
> kernel/busses/i2c-ali1535.d`/Module.mk' @' >
> kernel/busses/i2c-ali1535.d make: *** No hay ninguna regla para
> construir el objetivo `stdarg.h', necesario para
> `kernel/chips/vt1211.d'. Alto.
>
>
> in english: no target to rule to build 'stdarg.h'
You must have locales set (check with "locale"). Try "export LC_ALL=C"
before runing "make".
A better fix will be commited before 2.8.0 is released.
--
Jean Delvare
http://www.ensicaen.ismra.fr/~delvare/
^ permalink raw reply [flat|nested] 11+ messages in thread