All of lore.kernel.org
 help / color / mirror / Atom feed
* OOPS in 2.6.0-test2 with USB flash reader
@ 2003-08-03 23:21 Andrew S. Johnson
  0 siblings, 0 replies; only message in thread
From: Andrew S. Johnson @ 2003-08-03 23:21 UTC (permalink / raw)
  To: linux-kernel

I have an Imation FlashGO! 2.0 USB 7-in-1 flash reader that
works a few times, then things go bad.  I can mount, read from,
write to, and unmount a CF card a few times, but eventually it
quits working.

Here are the modules loaded:

Module                  Size  Used by
sg                     32716  0
snd_mixer_oss          19072  1
snd_emu10k1            93828  1
snd_rawmidi            24960  1 snd_emu10k1
snd_pcm                97472  1 snd_emu10k1
snd_timer              25728  1 snd_pcm
snd_seq_device          8068  2 snd_emu10k1,snd_rawmidi
snd_ac97_codec         49924  1 snd_emu10k1
snd_page_alloc         10436  2 snd_emu10k1,snd_pcm
snd_util_mem            4416  1 snd_emu10k1
snd_hwdep               8768  1 snd_emu10k1
snd                    50820  9 snd_mixer_oss,snd_emu10k1,snd_rawmidi,snd_pcm,snd_timer,snd_seq_device,snd_ac97_codec,snd_util_mem,snd_hwdep
radeon                119704  30
via_agp                 7168  1
agpgart                31336  2 via_agp
sd_mod                 13664  2
usb_storage            26624  1
mousedev                8660  1
hid                    32768  0
uhci_hcd               31816  0
usbcore               108500  5 usb_storage,hid,uhci_hcd
sr_mod                 16288  0
cdrom                  35168  1 sr_mod
ide_scsi               16192  0
scsi_mod              106772  5 sg,sd_mod,usb_storage,sr_mod,ide_scsi
8139too                24576  0
mii                     5248  1 8139too
crc32                   4352  1 8139too
nls_iso8859_1           3968  2
nls_cp437               5632  2
vfat                   15872  3
fat                    47584  1 vfat
ext3                  117672  6
jbd                    61528  1 ext3
unix                   27276  211

The  tail of dmesg:

hub 1-0:0: debounce: port 2: delay 100ms stable 4 status 0x101
hub 1-0:0: new USB device on port 2, assigned address 4
scsi2 : SCSI emulation for USB Mass Storage devices
  Vendor: Generic   Model: STORAGE DEVICE    Rev: 0111
  Type:   Direct-Access                      ANSI SCSI revision: 02
SCSI device sda: 31232 512-byte hdwr sectors (16 MB)
sda: Write Protect is off
sda: Mode Sense: 00 06 00 00
SCSI device sda: drive cache: none
 sda: sda1
Attached scsi removable disk sda at scsi2, channel 0, id 0, lun 0
WARNING: USB Mass Storage data integrity not assured
USB Mass Storage device found at 4
usb 1-2: USB disconnect, address 4
hub 1-0:0: debounce: port 2: delay 100ms stable 4 status 0x101
hub 1-0:0: new USB device on port 2, assigned address 5
scsi3 : SCSI emulation for USB Mass Storage devices
  Vendor: Generic   Model: STORAGE DEVICE    Rev: 0111
  Type:   Direct-Access                      ANSI SCSI revision: 02
Attached scsi removable disk sda at scsi3, channel 0, id 0, lun 0
WARNING: USB Mass Storage data integrity not assured
USB Mass Storage device found at 5
usb 1-2: USB disconnect, address 5
drivers/usb/core/hub.c: USB device not accepting new address (error=-32)
Unable to handle kernel paging request at virtual address 4d554e95
 printing eip:
e092d3d4
*pde = 00000000
Oops: 0000 [#1]
CPU:    0
EIP:    0060:[<e092d3d4>]    Not tainted
EFLAGS: 00010292
EIP is at scsi_try_host_reset+0x24/0xb0 [scsi_mod]
eax: 4d554e51   ebx: d4f61fa4   ecx: dcac7800   edx: 00000000
esi: d4f61fac   edi: df8281c0   ebp: d4f61f50   esp: d4f61f38
ds: 007b   es: 007b   ss: 0068
Process scsi_eh_3 (pid: 3148, threadinfo=d4f60000 task=dc42f280)
Stack: 00002003 df8281c0 df8281c0 d4f61fa4 d4f61fac d4f61fac d4f61f6c e092d596
       df8281c0 00000001 d4f61fa4 d4f61fac dcac7a00 d4f61f8c e092d9b7 d4f61fac
       d4f61fa4 d4f61fa4 dcac7a20 d4f60000 00000282 d4f61fc0 e092db00 dcac7a00
Call Trace:
 [<e092d596>] scsi_eh_host_reset+0x36/0x90 [scsi_mod]
 [<e092d9b7>] scsi_eh_ready_devs+0x57/0x70 [scsi_mod]
 [<e092db00>] scsi_unjam_host+0xc0/0xd0 [scsi_mod]
 [<e092dbd6>] scsi_error_handler+0xc6/0x110 [scsi_mod]
 [<e092db10>] scsi_error_handler+0x0/0x110 [scsi_mod]
 [<c0107259>] kernel_thread_helper+0x5/0xc

Code: 8b 40 44 8b 40 2c 85 c0 75 10 b8 03 20 00 00 8b 5d f4 8b 75

What else would be helpful?

Thanks,

Andy Johnson


^ permalink raw reply	[flat|nested] only message in thread

only message in thread, other threads:[~2003-08-03 23:21 UTC | newest]

Thread overview: (only message) (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2003-08-03 23:21 OOPS in 2.6.0-test2 with USB flash reader Andrew S. Johnson

This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.