* PROBLEM: PX-116A and SCSI emulation in 2.4.21 and 2.4.22 (The scsi wants to send us more data than expected - discarding data)
@ 2003-09-07 16:01 Thanos Kyritsis
0 siblings, 0 replies; only message in thread
From: Thanos Kyritsis @ 2003-09-07 16:01 UTC (permalink / raw)
To: linux-scsi
Good day,
I just installed a Plextor PX-116A DVD-ROM on my Linux system (trying
both kernel versions 2.4.21 and 2.4.22) and I am experiencing problems
trying to set up scsi emulation for it.
The mobo's chipset is a VIA Apollo pro 133A (Southbridge: vt82c596b)
The Plextor PX-116A when running as ide-scsi with **DMA on** cannot
mount disks (cds or dvds), cannot play dvd-movies and cannot readcd a
data-cd.
When I disable the DMA, everything works ok.
When I set it up as ide-cd, everything works ok no matter if the DMA is
on or off.
The drive is currently running at UDMA2 mode (ATA33).
I replaced my old Delta 52X CD-ROM drive with this Plextor DVD-ROM
drive. The old Delta CD-ROM had no problem as ide-scsi with DMA on.
(I want to say in other words that I wouldn't expect this to be a
hardware problem).
I've pasted below the command output and kernel messages from the
following commands:
cdrecord -scanbus
mount
readcd
mplayer -dvd 1
Then, I'll paste output from:
ver_linux
/proc/cpuinfo
/proc/modules
/proc/ioports
/proc/iomem
lspci -vvv
/proc/scsi/scsi
cdrecord -scanbus doesn't produce any weird kernel messages. All the
other commands produce something like this:
ide-scsi: The scsi wants to send us more data than expected - discarding
data
ide-scsi: [[ 28 0 0 0 0 0 0 0 2 0 0 0 ]
]
One last thing: I don't know if it's helpful, but I've read in the
cdfreaks.com forums that internally this Plextor DVD-ROM drive is
actually a Pioneer 120 DVD-ROM. Though, I cannot confirm this piece of
information.
Any kind of enlightment on this matter or help would be welcome :)
TIA
================
djart@blackmajesty:~$ cdrecord -scanbus
Cdrecord 2.0 (i686-pc-linux-gnu) Copyright (C) 1995-2002 Jφrg Schilling
Linux sg driver version: 3.1.25
Using libscg version 'schily-0.7'
scsibus0:
0,0,0 0) 'PLEXTOR ' 'CD-R PX-W1210A' '1.10'
Removable
CD-ROM
0,1,0 1) 'PLEXTOR ' 'DVD-ROM PX-116A ' '1.00'
Removable
CD-ROM
0,2,0 2) *
0,3,0 3) *
0,4,0 4) *
0,5,0 5) *
0,6,0 6) *
0,7,0 7) *
===============
djart@blackmajesty:~$ mount /cdrom/
mount: I could not determine the filesystem type, and none was specified
Kernel says:
Aug 26 18:22:21 blackmajesty kernel: Attached scsi CD-ROM sr0 at scsi0,
channel 0, id 0, lun 0
Aug 26 18:22:21 blackmajesty kernel: Attached scsi CD-ROM sr1 at scsi0,
channel 0, id 1, lun 0
Aug 26 18:22:21 blackmajesty kernel: sr0: scsi3-mmc drive: 32x/32x
writer cd/rw xa/form2 cdda tray
Aug 26 18:22:21 blackmajesty kernel: sr1: scsi3-mmc drive: 40x/48x cd/rw
xa/form2 cdda tray
Aug 26 18:22:22 blackmajesty kernel: ide-scsi: The scsi wants to send us
more data than expected - discarding data
Aug 26 18:22:22 blackmajesty kernel: ide-scsi: [[ 28 0 0 0 0 0 0 0 2 0 0
0 ]
Aug 26 18:22:22 blackmajesty kernel: ]
Aug 26 18:22:22 blackmajesty kernel: ide-scsi: expected 4096 got 8192
limit 4096
Aug 26 18:22:22 blackmajesty kernel: ide-scsi: The scsi wants to send us
more data than expected - discarding data
Aug 26 18:22:22 blackmajesty kernel: ide-scsi: [[ 28 0 0 0 0 2 0 0 8 0 0
0 ]
Aug 26 18:22:22 blackmajesty kernel: ]
Aug 26 18:22:22 blackmajesty kernel: ide-scsi: expected 16384 got 32768
limit 16384
Aug 26 18:22:22 blackmajesty kernel: ide-scsi: The scsi wants to send us
more data than expected - discarding data
Aug 26 18:22:22 blackmajesty kernel: ide-scsi: [[ 28 0 0 0 0 a 0 0 e 0 0
0 ]
Aug 26 18:22:22 blackmajesty kernel: ]
Aug 26 18:22:22 blackmajesty kernel: ide-scsi: expected 28672 got 57344
limit 28672
Aug 26 18:22:22 blackmajesty kernel: ide-scsi: The scsi wants to send us
more data than expected - discarding data
Aug 26 18:22:22 blackmajesty kernel: ide-scsi: [[ 28 0 0 0 0 18 0 0 1a 0
0 0 ]
Aug 26 18:22:22 blackmajesty kernel: ]
Aug 26 18:22:22 blackmajesty kernel: ide-scsi: expected 53248 got 106496
limit 53248
Aug 26 18:22:22 blackmajesty kernel: ide-scsi: The scsi wants to send us
more data than expected - discarding data
Aug 26 18:22:22 blackmajesty kernel: ide-scsi: [[ 28 0 0 0 0 0 0 0 1 0 0
0 ]
Aug 26 18:22:22 blackmajesty kernel: ]
Aug 26 18:22:22 blackmajesty kernel: ide-scsi: expected 2048 got 4096
limit 2048
Aug 26 18:22:22 blackmajesty kernel: FAT: bogus logical sector size 0
Aug 26 18:22:22 blackmajesty kernel: VFS: Can't find a valid FAT
filesystem on dev 0b:01.
Aug 26 18:22:22 blackmajesty kernel: ide-scsi: The scsi wants to send us
more data than expected - discarding data
Aug 26 18:22:22 blackmajesty kernel: ide-scsi: [[ 28 0 0 0 0 0 0 0 1 0 0
0 ]
Aug 26 18:22:22 blackmajesty kernel: ]
Aug 26 18:22:22 blackmajesty kernel: ide-scsi: expected 2048 got 4096
limit 2048
Aug 26 18:22:22 blackmajesty kernel: FAT: bogus logical sector size 0
Aug 26 18:22:22 blackmajesty kernel: VFS: Can't find a valid FAT
filesystem on dev 0b:01.
=============
Oh, when running readcd, it just halts on sector 256 and waits there
until I hit Ctr-C and let the scsi command timeout. Sector 256 is not a
standard. Running the command again may make the drive stop reading at
some other sector (i.e 1152).
djart@blackmajesty:~$ readcd dev=0,1,0 f=test1.iso -v
scsidev: '0,1,0'
scsibus: 0 target: 1 lun: 0
Linux sg driver version: 3.1.25
Read speed: 7040 kB/s (CD 40x, DVD 5x).
Write speed: 0 kB/s (CD 0x, DVD 0x).
Capacity: 355473 Blocks = 710946 kBytes = 694 MBytes = 728 prMB
Sectorsize: 2048 Bytes
Copy from SCSI (0,1,0) disk to file 'test1.iso'
end: 355473
addr: 256 cnt: 128
Kernel says:
Aug 26 18:32:22 blackmajesty kernel: ide-scsi: expected 262144 got
325632 limit 262144
Aug 26 18:32:22 blackmajesty kernel: ide-scsi: The scsi wants to send us
more data than expected - discarding data
Aug 26 18:32:22 blackmajesty kernel: ide-scsi: [[ 28 0 0 0 4 80 0 0 80 0
0 0 ]
======================
djart@blackmajesty:~$ mplayer -dvd 1
[snip mplayer specific stuff ....]
Playing DVD title 1
Reading disc structure, please wait...
libdvdread: Can't open file VIDEO_TS.IFO.
Can't open VMG info!
Kernel says:
Aug 26 18:29:47 blackmajesty kernel: ide-scsi: The scsi wants to send us
more data than expected - discarding data
Aug 26 18:29:47 blackmajesty kernel: ide-scsi: [[ 28 0 0 0 0 0 0 0 2 0 0
0 ]
Aug 26 18:29:47 blackmajesty kernel: ]
Aug 26 18:29:47 blackmajesty kernel: ide-scsi: expected 4096 got 8192
limit 4096
Aug 26 18:29:47 blackmajesty kernel: ide-scsi: The scsi wants to send us
more data than expected - discarding data
Aug 26 18:29:47 blackmajesty kernel: ide-scsi: [[ 28 0 0 0 0 10 0 0 4 0
0 0 ]
Aug 26 18:29:47 blackmajesty kernel: ]
Aug 26 18:29:47 blackmajesty kernel: ide-scsi: expected 8192 got 16384
limit 8192
Aug 26 18:29:47 blackmajesty kernel: ide-scsi: The scsi wants to send us
more data than expected - discarding data
Aug 26 18:29:47 blackmajesty kernel: ide-scsi: [[ 28 0 0 0 1 0 0 0 4 0 0
0 ]
Aug 26 18:29:47 blackmajesty kernel: ]
Aug 26 18:29:47 blackmajesty kernel: ide-scsi: expected 8192 got 16384
limit 8192
======================
djart@blackmajesty:/usr/src/linux/scripts$ sh ver_linux
If some fields are empty or look unusual you may have an old version.
Compare to the current minimal requirements in Documentation/Changes.
Linux blackmajesty 2.4.22 #1 Wed Aug 27 02:33:26 EEST 2003 i686 unknown
unknown GNU/Linux
Gnu C 3.2.3
Gnu make 3.80
util-linux 2.11z
mount 2.11z
modutils 2.4.22
e2fsprogs 1.33
jfsutils 1.1.2
reiserfsprogs 3.6.8
pcmcia-cs 3.2.4
quota-tools 3.08.
PPP 2.4.1
Linux C Library 2.3.1
Dynamic linker (ldd) 2.3.1
Linux C++ Library 5.0.3
Procps 2.0.13
Net-tools 1.60
Kbd 1.08
Sh-utils 5.0
Modules Loaded i2c-algo-bit w83781d i2c-proc i2c-viapro
i2c-core
nvidia ipt_LOG iptable_filter ip_tables ide-scsi scsi_mod 8139too mii
crc32 emu10k1 sound ac97_codec soundcore acm usb-uhci usbcore
ppp_deflate zlib_deflate ppp_async ppp_generic slhc agpgart lp
parport_pc parport apm nls_cp437 nls_iso8859-7 nls_cp737
================
djart@blackmajesty:/proc$ cat cpuinfo
processor : 0
vendor_id : GenuineIntel
cpu family : 6
model : 8
model name : Pentium III (Coppermine)
stepping : 6
cpu MHz : 755.291
cache size : 256 KB
fdiv_bug : no
hlt_bug : no
f00f_bug : no
coma_bug : no
fpu : yes
fpu_exception : yes
cpuid level : 2
wp : yes
flags : fpu vme de pse tsc msr pae mce cx8 sep mtrr pge
mca
cmov pat pse36 mmx fxsr sse
bogomips : 1507.32
==================
djart@blackmajesty:/proc$ cat modules
i2c-algo-bit 8424 0
w83781d 20656 0
i2c-proc 7280 0 [w83781d]
i2c-viapro 4048 0 (unused)
i2c-core 15144 0 [i2c-algo-bit w83781d i2c-proc
i2c-viapro]
nvidia 1628448 11 (autoclean)
ipt_LOG 3384 4 (autoclean)
iptable_filter 1740 1 (autoclean)
ip_tables 12512 2 [ipt_LOG iptable_filter]
ide-scsi 10352 0
scsi_mod 58580 1 [ide-scsi]
8139too 15080 1
mii 2496 0 [8139too]
crc32 2880 0 [8139too]
emu10k1 62728 1
sound 58292 0 [emu10k1]
ac97_codec 13608 0 [emu10k1]
soundcore 3588 7 [emu10k1 sound]
acm 6272 0
usb-uhci 23468 0 (unused)
usbcore 62624 0 [acm usb-uhci]
ppp_deflate 3512 0
zlib_deflate 18520 0 [ppp_deflate]
ppp_async 7712 0
ppp_generic 16092 0 [ppp_deflate ppp_async]
slhc 5200 0 [ppp_generic]
agpgart 14032 3
lp 6912 0
parport_pc 15972 1
parport 25536 1 [lp parport_pc]
apm 10184 2
nls_cp437 4348 1 (autoclean)
nls_iso8859-7 3612 2 (autoclean)
nls_cp737 3836 1 (autoclean)
===================
djart@blackmajesty:/proc$ cat ioports
0000-001f : dma1
0020-003f : pic1
0040-005f : timer
0060-006f : keyboard
0080-008f : dma page reg
00a0-00bf : pic2
00c0-00df : dma2
00f0-00ff : fpu
0170-0177 : ide1
01f0-01f7 : ide0
02f8-02ff : serial(auto)
0376-0376 : ide1
0378-037a : parport0
037b-037f : parport0
03c0-03df : vesafb
03f6-03f6 : ide0
03f8-03ff : serial(auto)
0cf8-0cff : PCI conf1
b400-b4ff : Realtek Semiconductor Co., Ltd. RTL-8139/8139C/8139C+
b400-b4ff : 8139too
b800-b807 : Creative Labs SB Live! MIDI/Game Port
d000-d01f : Creative Labs SB Live! EMU10k1
d000-d01f : EMU10K1
d400-d41f : VIA Technologies, Inc. USB
d400-d41f : usb-uhci
d800-d80f : VIA Technologies, Inc. VT82C586A/B/VT82C686/A/B/VT823x/A/C
PIPC Bus Master IDE
d800-d807 : ide0
d808-d80f : ide1
e800-e807 : viapro-smbus
==============
djart@blackmajesty:/proc$ cat iomem
00000000-0009fbff : System RAM
0009fc00-0009ffff : reserved
000a0000-000bffff : Video RAM area
000c0000-000c7fff : Video ROM
000f0000-000fffff : System ROM
00100000-23ffbfff : System RAM
00100000-0025b417 : Kernel code
0025b418-002d1c63 : Kernel data
23ffc000-23ffefff : ACPI Tables
23fff000-23ffffff : ACPI Non-volatile Storage
d5000000-d50000ff : Realtek Semiconductor Co., Ltd.
RTL-8139/8139C/8139C+
d5000000-d50000ff : 8139too
d5800000-d58fffff : Sigma Designs, Inc. REALmagic Hollywood Plus DVD
Decoder
d6000000-d6ffffff : PCI Bus #01
d6000000-d6ffffff : nVidia Corporation NV15DDR [GeForce2 Ti]
d7000000-d7000fff : Brooktree Corporation Bt848 Video Capture
d7f00000-e3ffffff : PCI Bus #01
d8000000-dfffffff : nVidia Corporation NV15DDR [GeForce2 Ti]
d8000000-d85fffff : vesafb
e4000000-e7ffffff : VIA Technologies, Inc. VT82C693A/694x [Apollo
PRO133x]
ffff0000-ffffffff : reserved
===================
root@blackmajesty:~# lspci -vvv
00:00.0 Host bridge: VIA Technologies, Inc. VT82C693A/694x [Apollo
PRO133x] (rev c4)
Subsystem: Asustek Computer, Inc.: Unknown device 8017
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium
>TAbort-
<TAbort- <MAbort+ >SERR- <PERR-
Latency: 0
Region 0: Memory at e4000000 (32-bit, prefetchable)
[size=64M]
Capabilities: [a0] AGP version 2.0
Status: RQ=32 Iso- ArqSz=0 Cal=0 SBA+ ITACoh-
GART64-
HTrans- 64bit- FW- AGP3- Rate=x1,x2
Command: RQ=1 ArqSz=0 Cal=0 SBA- AGP+ GART64-
64bit- FW-
Rate=x2
Capabilities: [c0] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA
PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
00:01.0 PCI bridge: VIA Technologies, Inc. VT82C598/694x [Apollo
MVP3/Pro133x AGP] (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66Mhz+ UDF- FastB2B- ParErr- DEVSEL=medium
>TAbort-
<TAbort- <MAbort+ >SERR- <PERR-
Latency: 0
Bus: primary=00, secondary=01, subordinate=01, sec-latency=0
I/O behind bridge: 0000e000-0000dfff
Memory behind bridge: d6000000-d6ffffff
Prefetchable memory behind bridge: d7f00000-e3ffffff
BridgeCtl: Parity- SERR- NoISA- VGA+ MAbort- >Reset-
FastB2B-
Capabilities: [80] Power Management version 2
Flags: PMEClk- DSI- D1+ D2- AuxCurrent=0mA
PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
00:04.0 ISA bridge: VIA Technologies, Inc. VT82C596 ISA [Mobile South]
(rev 23)
Subsystem: Asustek Computer, Inc.: Unknown device 8017
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping+ SERR- FastB2B-
Status: Cap- 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium
>TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 0
00:04.1 IDE interface: VIA Technologies, Inc. VT82C586/B/686A/B PIPC Bus
Master IDE (rev 10) (prog-if 8a [Master SecP PriP])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping+ SERR- FastB2B-
Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium
>TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 32
Region 4: I/O ports at d800 [size=16]
Capabilities: [c0] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA
PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
00:04.2 USB Controller: VIA Technologies, Inc. USB (rev 11) (prog-if 00
[UHCI])
Subsystem: VIA Technologies, Inc. (Wrong ID) USB Controller
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop-
ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium
>TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 32, cache line size 08
Interrupt: pin D routed to IRQ 5
Region 4: I/O ports at d400 [size=32]
Capabilities: [80] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA
PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
00:04.3 Host bridge: VIA Technologies, Inc. VT82C596 Power Management
(rev 30)
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR- FastB2B-
Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium
>TAbort-
<TAbort- <MAbort- >SERR- <PERR-
00:09.0 Multimedia audio controller: Creative Labs SB Live! EMU10k1 (rev
08)
Subsystem: Creative Labs CT4832 SBLive! Value
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium
>TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 32 (500ns min, 5000ns max)
Interrupt: pin A routed to IRQ 5
Region 0: I/O ports at d000 [size=32]
Capabilities: [dc] Power Management version 1
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA
PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
00:09.1 Input device controller: Creative Labs SB Live! MIDI/Game Port
(rev 08)
Subsystem: Creative Labs Gameport Joystick
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium
>TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 32
Region 0: I/O ports at b800 [size=8]
Capabilities: [dc] Power Management version 1
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA
PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
00:0a.0 Multimedia controller: Sigma Designs, Inc. REALmagic Hollywood
Plus DVD Decoder (rev 02)
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium
>TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 32
Interrupt: pin A routed to IRQ 10
Region 0: Memory at d5800000 (32-bit, non-prefetchable)
[size=1M]
Capabilities: [40] Power Management version 1
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA
PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
00:0d.0 Ethernet controller: Realtek Semiconductor Co., Ltd.
RTL-8139/8139C/8139C+ (rev 10)
Subsystem: Realtek Semiconductor Co., Ltd. RT8139
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium
>TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 32 (8000ns min, 16000ns max)
Interrupt: pin A routed to IRQ 5
Region 0: I/O ports at b400 [size=256]
Region 1: Memory at d5000000 (32-bit, non-prefetchable)
[size=256]
Capabilities: [50] Power Management version 2
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=375mA
PME(D0-,D1+,D2+,D3hot+,D3cold+)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
00:0e.0 Multimedia video controller: Brooktree Corporation Bt848 Video
Capture (rev 12)
Control: I/O- Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR- FastB2B-
Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium
>TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Interrupt: pin A routed to IRQ 10
Region 0: Memory at d7000000 (32-bit, prefetchable)
[size=4K]
01:00.0 VGA compatible controller: nVidia Corporation NV15DDR [GeForce2
Ti] (rev a4) (prog-if 00 [VGA])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66Mhz+ UDF- FastB2B+ ParErr- DEVSEL=medium
>TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 248 (1250ns min, 250ns max)
Interrupt: pin A routed to IRQ 11
Region 0: Memory at d6000000 (32-bit, non-prefetchable)
[size=16M]
Region 1: Memory at d8000000 (32-bit, prefetchable)
[size=128M]
Expansion ROM at d7ff0000 [disabled] [size=64K]
Capabilities: [60] Power Management version 1
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA
PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [44] AGP version 2.0
Status: RQ=32 Iso- ArqSz=0 Cal=0 SBA- ITACoh-
GART64-
HTrans- 64bit- FW+ AGP3- Rate=x1,x2,x4
Command: RQ=32 ArqSz=0 Cal=0 SBA- AGP+ GART64-
64bit-
FW- Rate=x2
====================
djart@blackmajesty:/proc/scsi$ cat scsi
Attached devices:
Host: scsi0 Channel: 00 Id: 00 Lun: 00
Vendor: PLEXTOR Model: CD-R PX-W1210A Rev: 1.10
Type: CD-ROM ANSI SCSI
revision: 02
Host: scsi0 Channel: 00 Id: 01 Lun: 00
Vendor: PLEXTOR Model: DVD-ROM PX-116A Rev: 1.00
Type: CD-ROM ANSI SCSI
revision: 02
=======================
--
Kyritsis Athanasios <djart at hellug.gr>
Studying Electrical & Computer Engineering
@ Univ. of Patras, Greece
-
To unsubscribe from this list: send the line "unsubscribe linux-scsi" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
^ permalink raw reply [flat|nested] only message in thread
only message in thread, other threads:[~2003-09-07 15:57 UTC | newest]
Thread overview: (only message) (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2003-09-07 16:01 PROBLEM: PX-116A and SCSI emulation in 2.4.21 and 2.4.22 (The scsi wants to send us more data than expected - discarding data) Thanos Kyritsis
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.