ssh policy hassles

ssh policy hassles

[Dale Amon]

avc:  denied  { search } for  pid=654 exe=/usr/sbin/sshd dev=sda2 ino=903169 scontext=system_u:system_r:sshd_t tcontext=system_u:object_r:var_lib_t tclass=dir

Can anyone think of a reason why an sshd would try to search
/var/lib upon an incoming ssh connection? /var/lib is
not in the source code, it's not in the config files...
The only thing I see that looks even vaguely like a possible 
target there is /var/lib/urandom.




--
This message was distributed to subscribers of the selinux mailing list.
If you no longer wish to subscribe, send mail to majordomo@tycho.nsa.gov with
the words "unsubscribe selinux" without quotes as the message.

Re: ssh policy hassles

[Kerry Thompson]

Dale Amon said:
> avc:  denied  { search } for  pid=654 exe=/usr/sbin/sshd dev=sda2
> ino=903169 scontext=system_u:system_r:sshd_t
> tcontext=system_u:object_r:var_lib_t tclass=dir
>
> Can anyone think of a reason why an sshd would try to search
> /var/lib upon an incoming ssh connection? /var/lib is
> not in the source code, it's not in the config files...
> The only thing I see that looks even vaguely like a possible
> target there is /var/lib/urandom.
>

It might be in /etc/passwd for privsep, and new connections try to look
for something there. From my RedHat 9 box:

$ grep ssh /etc/passwd
sshd:x:74:74:Privilege-separated SSH:/var/empty/sshd:/sbin/nologin
$ ls -l /var/empty
total 0
$


-- 
Kerry Thompson, CCNA CISSP
Information Systems Security Consultant
http://www.crypt.gen.nz  kerry@crypt.gen.nz


--
This message was distributed to subscribers of the selinux mailing list.
If you no longer wish to subscribe, send mail to majordomo@tycho.nsa.gov with
the words "unsubscribe selinux" without quotes as the message.

RE: ssh policy hassles

[Inger, Slav (S.B.)]

-----Original Message-----
From: Dale Amon [mailto:amon@vnl.com]
Sent: Wednesday, September 24, 2003 4:31 PM
To: SELinux Mail List
Subject: ssh policy hassles

> avc:  denied  { search } for  pid=654 exe=/usr/sbin/sshd dev=sda2 ino=903169 
> scontext=system_u:system_r:sshd_t tcontext=system_u:object_r:var_lib_t tclass=dir
> 
> Can anyone think of a reason why an sshd would try to search
> /var/lib upon an incoming ssh connection? /var/lib is
> not in the source code, it's not in the config files...
> The only thing I see that looks even vaguely like a possible 
> target there is /var/lib/urandom.

Don't know if this helps much, but the only reference I see to /var/lib in the trace is sshd doing a stat on directory /var/lib/empty.

--
This message was distributed to subscribers of the selinux mailing list.
If you no longer wish to subscribe, send mail to majordomo@tycho.nsa.gov with
the words "unsubscribe selinux" without quotes as the message.

Re: ssh policy hassles

[Dale Amon]

On Wed, Sep 24, 2003 at 05:55:40PM -0400, Inger, Slav (S.B.) wrote:
> Don't know if this helps much, but the only reference I see to /var/lib in the trace is sshd doing a stat on directory /var/lib/empty.

It certainly does. I wonder why I can't find it via a source grep? 
I guess that means it does have a valid reason to have access to 
that directory.

I'll have to go to the ssh.te now and figure out why it
isn't there already. Seems strange that it isn't if it
is commonly accessed.

--
This message was distributed to subscribers of the selinux mailing list.
If you no longer wish to subscribe, send mail to majordomo@tycho.nsa.gov with
the words "unsubscribe selinux" without quotes as the message.

Re: ssh policy hassles

[Dale Amon]

On Wed, Sep 24, 2003 at 11:11:57PM +0100, Dale Amon wrote:
> I'll have to go to the ssh.te now and figure out why it
> isn't there already. Seems strange that it isn't if it
> is commonly accessed.

I've added this:

# DMA20030924 Added search /var/lib 
allow $1 var_lib_t:dir search;

to ssh.te and it gets rid of that avc. I wonder if this
is needed in the master policy? Up to Steve I guess.

Okay, now I've still one more, and this one is really
confusing because ino=48726022 seems not to exist:

	48726022        <inode not found>

I half wonder if I've got a bad link somewhere. It would
be easy enough to add an allow for this, but I'd like
to figure out why rather than blindly add things.

avc:  denied  { read } for  pid=743 exe=/usr/sbin/sshd dev= ino=48726022 scontext=system_u:system_r:sshd_t tcontext=system_u:system_r:sshd_t tclass=lnk_file

-- 
------------------------------------------------------
       IN MY NAME:            Dale Amon, CEO/MD
  No Mushroom clouds over     Islandone Society
    London and New York.      www.islandone.org
------------------------------------------------------

--
This message was distributed to subscribers of the selinux mailing list.
If you no longer wish to subscribe, send mail to majordomo@tycho.nsa.gov with
the words "unsubscribe selinux" without quotes as the message.

Re: ssh policy hassles

[Diyab]

Dale Amon wrote:
> On Wed, Sep 24, 2003 at 11:11:57PM +0100, Dale Amon wrote:
> 
>>I'll have to go to the ssh.te now and figure out why it
>>isn't there already. Seems strange that it isn't if it
>>is commonly accessed.
> 
> 
> I've added this:
> 
> # DMA20030924 Added search /var/lib 
> allow $1 var_lib_t:dir search;
> 
> to ssh.te and it gets rid of that avc. I wonder if this
> is needed in the master policy? Up to Steve I guess.
> 
> Okay, now I've still one more, and this one is really
> confusing because ino=48726022 seems not to exist:
> 
> 	48726022        <inode not found>
> 
> I half wonder if I've got a bad link somewhere. It would
> be easy enough to add an allow for this, but I'd like
> to figure out why rather than blindly add things.
> 
> avc:  denied  { read } for  pid=743 exe=/usr/sbin/sshd dev= ino=48726022 scontext=system_u:system_r:sshd_t tcontext=system_u:system_r:sshd_t tclass=lnk_file
> 

I don't get that /var/lib avc error.  Does the login work without that 
allow rule you added?  If so then maybe it doesn't really need it.

Maybe that "bad" link has something to do with it.  unmount /var and run 
an fsck on it then remount it and see if you still get the error.

Timothy,

-- 
I put instant coffee in a microwave and almost went back in time.
		-- Steven Wright


--
This message was distributed to subscribers of the selinux mailing list.
If you no longer wish to subscribe, send mail to majordomo@tycho.nsa.gov with
the words "unsubscribe selinux" without quotes as the message.

Re: ssh policy hassles

[Russell Coker]

On Thu, 25 Sep 2003 06:31, Dale Amon wrote:
> avc:  denied  { search } for  pid=654 exe=/usr/sbin/sshd dev=sda2
> ino=903169 scontext=system_u:system_r:sshd_t
> tcontext=system_u:object_r:var_lib_t tclass=dir

What is in /etc/passwd for the sshd account?

> The only thing I see that looks even vaguely like a possible
> target there is /var/lib/urandom.

That's not something that sshd should be accessing.

Does sshd work well without the access?  If so then a dontaudit rule is in 
order.

> Okay, now I've still one more, and this one is really
> confusing because ino=48726022 seems not to exist:
>
> 	48726022        <inode not found>
>
> I half wonder if I've got a bad link somewhere. It would
> be easy enough to add an allow for this, but I'd like
> to figure out why rather than blindly add things.
>
> avc:  denied  { read } for  pid=743 exe=/usr/sbin/sshd dev= ino=48726022
> scontext=system_u:system_r:sshd_t tcontext=system_u:system_r:sshd_t
> tclass=lnk_file

When you see that a domain is listed as the target (sshd_t is the tcontext) 
for a file/dir/link_file access then it's an access to /proc/pid .  In this 
case it's probably access to /proc/self/cwd or something.  In my latest 
policy I have the following:
dontaudit sshd_t proc_t:dir search;

Nothing else is permitted under /proc.

-- 
http://www.coker.com.au/selinux/   My NSA Security Enhanced Linux packages
http://www.coker.com.au/bonnie++/  Bonnie++ hard drive benchmark
http://www.coker.com.au/postal/    Postal SMTP/POP benchmark
http://www.coker.com.au/~russell/  My home page


--
This message was distributed to subscribers of the selinux mailing list.
If you no longer wish to subscribe, send mail to majordomo@tycho.nsa.gov with
the words "unsubscribe selinux" without quotes as the message.

Re: ssh policy hassles

[Tom]

On Wed, Sep 24, 2003 at 11:11:57PM +0100, Dale Amon wrote:
> > Don't know if this helps much, but the only reference I see to /var/lib in the trace is sshd doing a stat on directory /var/lib/empty.
> 
> It certainly does. I wonder why I can't find it via a source grep? 

Because it is not hard-coded. It's whatever home-directory you set in
/etc/passwd for the privsep account.

That's also why others don't see that access. On Debian, for example,
it defaults to /var/empty

You might want to define a special type for the empty dir, so you can
move it around and don't have to give sshd access to all of /var

-- 
http://web.lemuria.org/pubkey.html
pub  1024D/2D7A04F5 2002-05-16 Tom Vogt <tom@lemuria.org>
     Key fingerprint = C731 64D1 4BCF 4C20 48A4  29B2 BF01 9FA1 2D7A 04F5

--
This message was distributed to subscribers of the selinux mailing list.
If you no longer wish to subscribe, send mail to majordomo@tycho.nsa.gov with
the words "unsubscribe selinux" without quotes as the message.

Re: ssh policy hassles

[Russell Coker]

On Thu, 25 Sep 2003 16:46, Tom wrote:
> That's also why others don't see that access. On Debian, for example,
> it defaults to /var/empty
>
> You might want to define a special type for the empty dir, so you can
> move it around and don't have to give sshd access to all of /var

I don't think it really needs a separate type.  Only search access should be 
required, and search access for /var is necessary to even get to
/var/empty...

-- 
http://www.coker.com.au/selinux/   My NSA Security Enhanced Linux packages
http://www.coker.com.au/bonnie++/  Bonnie++ hard drive benchmark
http://www.coker.com.au/postal/    Postal SMTP/POP benchmark
http://www.coker.com.au/~russell/  My home page


--
This message was distributed to subscribers of the selinux mailing list.
If you no longer wish to subscribe, send mail to majordomo@tycho.nsa.gov with
the words "unsubscribe selinux" without quotes as the message.

Re: ssh policy hassles

[Dale Amon]

On Wed, Sep 24, 2003 at 11:01:56PM -0400, Diyab wrote:
> Dale Amon wrote:
> I don't get that /var/lib avc error.  Does the login work without that 
> allow rule you added?  If so then maybe it doesn't really need it.

Nope. I cannot connect in enforcing mode. I've worked my way through
two ssh fatal avc's and this is the last one. None of them make
particular sense to me. To the point that I even did a 
forced reinstall of ssh...
 
> Maybe that "bad" link has something to do with it.  unmount /var and run 
> an fsck on it then remount it and see if you still get the error.

It's not a partition, just a plain directory. The whole disk is a
/ partition so all I could do is reboot. That will happen later
this morning anyway, since I shut the test bed down at night. It's
old and noisy. :-)

--
This message was distributed to subscribers of the selinux mailing list.
If you no longer wish to subscribe, send mail to majordomo@tycho.nsa.gov with
the words "unsubscribe selinux" without quotes as the message.

Re: ssh policy hassles

[Dale Amon]

On Thu, Sep 25, 2003 at 08:46:17AM +0200, Tom wrote:
> Because it is not hard-coded. It's whatever home-directory you set in
> /etc/passwd for the privsep account.
> That's also why others don't see that access. On Debian, for example,
> it defaults to /var/empty

Some ssh documentation recommends this as the default setup, 

 mkdir /var/empty
 chown root:sys /var/empty
 chmod 755 /var/empty
 groupadd sshd
 useradd -g sshd -c 'sshd privsep' -d /var/empty -s /bin/false sshd

But debian has this setup:

/etc/passwd
	sshd:x:102:65534::/var/run/sshd:/dev/null

/etc/group
	ssh:x:105:

/var
	drwxr-xr-x    2 root     root         1024 Aug 27  2002 empty

/var/run
	drwxr-xr-x    2 root     root         1024 Aug 22 22:26 /var/run/sshd

Which looks like it should be using /var/run/sshd insteady of /var/empty,
and yet the search priv on /var fixed one problem. 

> You might want to define a special type for the empty dir, so you can
> move it around and don't have to give sshd access to all of /var

That might be necessary. As far as I can tell, I've got
a straight out of the dpkg openssh install on this box. I'd think
anyone else on debian should be seeing the same problem if this
is the case, so I'm very interested in seeing where the real
problem lies, ie specific to my test machine, or a general
package problem for debian, or a generic problem for ssh policy.

I've now also got to follow up on Russ's suggestions. His note
that the missing inode is a /proc item might be very helpful on
that one.



--
This message was distributed to subscribers of the selinux mailing list.
If you no longer wish to subscribe, send mail to majordomo@tycho.nsa.gov with
the words "unsubscribe selinux" without quotes as the message.

Re: ssh policy hassles

[Dale Amon]

On Thu, Sep 25, 2003 at 01:32:53PM +1000, Russell Coker wrote:
> On Thu, 25 Sep 2003 06:31, Dale Amon wrote:
> > avc:  denied  { search } for  pid=654 exe=/usr/sbin/sshd dev=sda2
> > ino=903169 scontext=system_u:system_r:sshd_t
> > tcontext=system_u:object_r:var_lib_t tclass=dir
> 
> What is in /etc/passwd for the sshd account?
> 
> > The only thing I see that looks even vaguely like a possible
> > target there is /var/lib/urandom.
> 
> That's not something that sshd should be accessing.
> 
> Does sshd work well without the access?  If so then a dontaudit rule is in 
> order.
> 
> > Okay, now I've still one more, and this one is really
> > confusing because ino=48726022 seems not to exist:
> >
> > 	48726022        <inode not found>
> >
> > I half wonder if I've got a bad link somewhere. It would
> > be easy enough to add an allow for this, but I'd like
> > to figure out why rather than blindly add things.
> >
> > avc:  denied  { read } for  pid=743 exe=/usr/sbin/sshd dev= ino=48726022
> > scontext=system_u:system_r:sshd_t tcontext=system_u:system_r:sshd_t
> > tclass=lnk_file
> 
> When you see that a domain is listed as the target (sshd_t is the tcontext) 
> for a file/dir/link_file access then it's an access to /proc/pid .  In this 
> case it's probably access to /proc/self/cwd or something.  In my latest 
> policy I have the following:
> dontaudit sshd_t proc_t:dir search;

I'll try adding that. However something is still very wrong here. From
log/auth on the selinux host when in enforcing mode (yes it works when not):

 Sep 25 11:40:26 cvs ssh(pam_unix)[394]: authentication failure; logname= uid=0 euid=0 tty=NODEVssh ruser= rhost=10.0.0.25  user=root
 Sep 25 11:40:32 cvs sshd[394]: Accepted password for root from 10.0.0.25 port 1160 ssh2
 Sep 25 11:40:32 cvs sshd[394]: default security context is root:staff_r:staff_t
 Sep 25 11:40:32 cvs sshd[394]: setting tty /dev/pts/2 context to root:object_r:staff_devpts_t
 Sep 25 11:40:32 cvs sshd[394]: fatal: chown(/dev/pts/2, 0, 5) failed: Permission denied
 Sep 25 11:40:32 cvs sshd[394]: error: chown /dev/pts/2 0 0 failed: Permission denied
 Sep 25 11:40:32 cvs sshd[394]: error: chmod /dev/pts/2 0666 failed: Permission denied

and these are the corresponding avcs:

 avc:  denied  { read } for  pid=394 exe=/usr/sbin/sshd dev= ino=25853959 scontext=system_u:system_r:sshd_t tcontext=system_u:system_r:sshd_t tclass=lnk_file

I'm starting to wonder if this has anything to do with the
2.6.0 devpts filesystem?

	rootfs / rootfs rw 0 0
	/dev2/root2 / ext3 rw 0 0
	none /selinux selinuxfs rw 0 0
	proc /proc proc rw 0 0
	devpts /dev/pts devpts rw 0 0
	/dev/sdb1 /home/cvs reiserfs rw 0 0
	/dev/sdc1 /disk2 reiserfs rw 0 0


--
This message was distributed to subscribers of the selinux mailing list.
If you no longer wish to subscribe, send mail to majordomo@tycho.nsa.gov with
the words "unsubscribe selinux" without quotes as the message.

Re: ssh policy hassles

[Dale Amon]

On Thu, Sep 25, 2003 at 11:44:57AM +0100, Dale Amon wrote:
>  Sep 25 11:40:26 cvs ssh(pam_unix)[394]: authentication failure; logname= uid=0 euid=0 tty=NODEVssh ruser= rhost=10.0.0.25  user=root
>  Sep 25 11:40:32 cvs sshd[394]: Accepted password for root from 10.0.0.25 port 1160 ssh2
>  Sep 25 11:40:32 cvs sshd[394]: default security context is root:staff_r:staff_t
>  Sep 25 11:40:32 cvs sshd[394]: setting tty /dev/pts/2 context to root:object_r:staff_devpts_t
>  Sep 25 11:40:32 cvs sshd[394]: fatal: chown(/dev/pts/2, 0, 5) failed: Permission denied
>  Sep 25 11:40:32 cvs sshd[394]: error: chown /dev/pts/2 0 0 failed: Permission denied
>  Sep 25 11:40:32 cvs sshd[394]: error: chmod /dev/pts/2 0666 failed: Permission denied

Okay, I tried it with a policy that allowed the only
remaining avc and I still get the same as the above.
So I'm really starting to look at the devpts angle.
Has anyone else had problems with it? 

--
This message was distributed to subscribers of the selinux mailing list.
If you no longer wish to subscribe, send mail to majordomo@tycho.nsa.gov with
the words "unsubscribe selinux" without quotes as the message.

Re: ssh policy hassles

[Dale Amon]

On Thu, Sep 25, 2003 at 11:44:57AM +0100, Dale Amon wrote:
> I'm starting to wonder if this has anything to do with the
> 2.6.0 devpts filesystem?

Okay, I find this, which doesn't seem right:

drwxr-xr-x  root     root     (null)                           /dev/pts

Should I perhaps add a a line to genfs_contexts?

  genfscon devpts /                     system_u:object_r:devpts_t


--
This message was distributed to subscribers of the selinux mailing list.
If you no longer wish to subscribe, send mail to majordomo@tycho.nsa.gov with
the words "unsubscribe selinux" without quotes as the message.

Re: ssh policy hassles

[Russell Coker]

On Thu, 25 Sep 2003 22:17, Dale Amon wrote:
> On Thu, Sep 25, 2003 at 11:44:57AM +0100, Dale Amon wrote:
> > I'm starting to wonder if this has anything to do with the
> > 2.6.0 devpts filesystem?
>
> Okay, I find this, which doesn't seem right:
>
> drwxr-xr-x  root     root     (null)                           /dev/pts

It doesn't seem right, but it apparently is.  On my 2.4.21 SE2 system it has 
no label on /dev/pts and sshd works perfectly.

-- 
http://www.coker.com.au/selinux/   My NSA Security Enhanced Linux packages
http://www.coker.com.au/bonnie++/  Bonnie++ hard drive benchmark
http://www.coker.com.au/postal/    Postal SMTP/POP benchmark
http://www.coker.com.au/~russell/  My home page


--
This message was distributed to subscribers of the selinux mailing list.
If you no longer wish to subscribe, send mail to majordomo@tycho.nsa.gov with
the words "unsubscribe selinux" without quotes as the message.

Re: ssh policy hassles

[Stephen Smalley]

On Thu, 2003-09-25 at 08:21, Russell Coker wrote:
> > Okay, I find this, which doesn't seem right:
> >
> > drwxr-xr-x  root     root     (null)                           /dev/pts
> 
> It doesn't seem right, but it apparently is.  On my 2.4.21 SE2 system it has 
> no label on /dev/pts and sshd works perfectly.

There is a security label that is internally maintained by the kernel
and used for access controls, but it isn't exported to userspace via an
xattr handler.  We created an xattr handler for the devpts file inodes
to support relabeling by sshd and similar programs, but there is no such
requirement for the devpts root inode.  They have different inode
operation vectors, and we only patched the one used for the files.  The
root inode uses the simple_dir_inode_operations provided by libfs, which
only implements a lookup method, and we chose not to fork a separate
operations vector for it.

-- 
Stephen Smalley <sds@epoch.ncsc.mil>
National Security Agency


--
This message was distributed to subscribers of the selinux mailing list.
If you no longer wish to subscribe, send mail to majordomo@tycho.nsa.gov with
the words "unsubscribe selinux" without quotes as the message.

Re: ssh policy hassles

[Diyab]

Dale Amon wrote:
> On Thu, Sep 25, 2003 at 08:46:17AM +0200, Tom wrote:
>>You might want to define a special type for the empty dir, so you can
>>move it around and don't have to give sshd access to all of /var
> 

I did this when I installed it on slackware.  In ssh.fc I added

	/var/empty	system_u:object_r:sshd_privsep_dir_t

and in sshd.te I added

	type sshd_privsep_dir_t, file_type, sysadmfile;

and

	allow sshd_t sshd_privsep_dir_t:dir { getattr search };

Timothy,

-- 
I put instant coffee in a microwave and almost went back in time.
		-- Steven Wright


--
This message was distributed to subscribers of the selinux mailing list.
If you no longer wish to subscribe, send mail to majordomo@tycho.nsa.gov with
the words "unsubscribe selinux" without quotes as the message.

Re: ssh policy hassles

[Dale Amon]

On Thu, Sep 25, 2003 at 08:55:38AM -0400, Stephen Smalley wrote:
> There is a security label that is internally maintained by the kernel
> and used for access controls, but it isn't exported to userspace via an
> xattr handler.  We created an xattr handler for the devpts file inodes
> to support relabeling by sshd and similar programs, but there is no such
> requirement for the devpts root inode.  They have different inode
> operation vectors, and we only patched the one used for the files.  The
> root inode uses the simple_dir_inode_operations provided by libfs, which
> only implements a lookup method, and we chose not to fork a separate
> operations vector for it.

Then I guess I'm at a brick wall for the moment. No idea what else
to look at. Perhaps its time for a late lunch break :-)


--
This message was distributed to subscribers of the selinux mailing list.
If you no longer wish to subscribe, send mail to majordomo@tycho.nsa.gov with
the words "unsubscribe selinux" without quotes as the message.

Re: ssh policy hassles

[Russell Coker]

On Thu, 25 Sep 2003 22:55, Diyab wrote:
> Dale Amon wrote:
> > On Thu, Sep 25, 2003 at 08:46:17AM +0200, Tom wrote:
> >>You might want to define a special type for the empty dir, so you can
> >>move it around and don't have to give sshd access to all of /var
>
> I did this when I installed it on slackware.  In ssh.fc I added
>
> 	/var/empty	system_u:object_r:sshd_privsep_dir_t
>
> and in sshd.te I added
>
> 	type sshd_privsep_dir_t, file_type, sysadmfile;
>
> and
>
> 	allow sshd_t sshd_privsep_dir_t:dir { getattr search };

Why not just label it as var_run_t?

In my latest policy I have the privsep directory (which is under /var/run in 
Debian) labeled as var_run_t.  In the case of sshd as a daemon it can create 
files under that, but in the case of sshd run from inetd (which is what you 
will be doing if you want to lock down sshd) then it gets { getattr search } 
access.

NB  The privsep process will be prevented from creating files by Unix 
permissions anyway.  Sshd does not have permissions to change the mode on the 
directory and the privsep process can not change it's UID.

-- 
http://www.coker.com.au/selinux/   My NSA Security Enhanced Linux packages
http://www.coker.com.au/bonnie++/  Bonnie++ hard drive benchmark
http://www.coker.com.au/postal/    Postal SMTP/POP benchmark
http://www.coker.com.au/~russell/  My home page


--
This message was distributed to subscribers of the selinux mailing list.
If you no longer wish to subscribe, send mail to majordomo@tycho.nsa.gov with
the words "unsubscribe selinux" without quotes as the message.

Re: ssh policy hassles

[Diyab]

Russell Coker wrote:
> On Thu, 25 Sep 2003 22:55, Diyab wrote:
> 
>>Dale Amon wrote:
>>
>>>On Thu, Sep 25, 2003 at 08:46:17AM +0200, Tom wrote:
>>>
>>>>You might want to define a special type for the empty dir, so you can
>>>>move it around and don't have to give sshd access to all of /var
>>
>>I did this when I installed it on slackware.  In ssh.fc I added
>>
>>	/var/empty	system_u:object_r:sshd_privsep_dir_t
>>
>>and in sshd.te I added
>>
>>	type sshd_privsep_dir_t, file_type, sysadmfile;
>>
>>and
>>
>>	allow sshd_t sshd_privsep_dir_t:dir { getattr search };
> 
> 
> Why not just label it as var_run_t?

When I initially setup sshd with the default setting of /var/empty I 
decided to just give it it's own type in case there was ever a need to 
change the privsep location or the permissions it needs.

> In my latest policy I have the privsep directory (which is under /var/run in 
> Debian) labeled as var_run_t.  In the case of sshd as a daemon it can create 
> files under that, but in the case of sshd run from inetd (which is what you 
> will be doing if you want to lock down sshd) then it gets { getattr search } 
> access.

What do you get by running sshd through inetd that you don't get by 
running sshd alone?

Timothy,

-- 
I put instant coffee in a microwave and almost went back in time.
		-- Steven Wright


--
This message was distributed to subscribers of the selinux mailing list.
If you no longer wish to subscribe, send mail to majordomo@tycho.nsa.gov with
the words "unsubscribe selinux" without quotes as the message.

Re: ssh policy hassles

[Russell Coker]

On Fri, 26 Sep 2003 10:16, Diyab wrote:
> > In my latest policy I have the privsep directory (which is under /var/run
> > in Debian) labeled as var_run_t.  In the case of sshd as a daemon it can
> > create files under that, but in the case of sshd run from inetd (which is
> > what you will be doing if you want to lock down sshd) then it gets {
> > getattr search } access.
>
> What do you get by running sshd through inetd that you don't get by
> running sshd alone?

When run from inetd the sshd can not bind to port 22, so an attacker can't 
cause the current sshd to die and take over the port.

-- 
http://www.coker.com.au/selinux/   My NSA Security Enhanced Linux packages
http://www.coker.com.au/bonnie++/  Bonnie++ hard drive benchmark
http://www.coker.com.au/postal/    Postal SMTP/POP benchmark
http://www.coker.com.au/~russell/  My home page



--
This message was distributed to subscribers of the selinux mailing list.
If you no longer wish to subscribe, send mail to majordomo@tycho.nsa.gov with
the words "unsubscribe selinux" without quotes as the message.

Re: ssh policy hassles

[Dale Amon]

I'm still at work on the sshd problem. Just as a summary:

	kernel: 2.6.0-test5
	using devpts
	Russell Coker policy
	Colin's selinux experimental branch debian packages

Via the artifice of 
	/root/newrules.pl > /etc/selinux/domain/tmp.te
	make load

I've been able to get a copy of Colin's ssh source running with
my own added debugging printout. I've (thus far) not been able
to get sshd running under gdb with enforcing on so I can't get
much of a look at the ephemeral /dev/pts.

I've captured the point of failure though, and am not sure why
it should be so since it happens only with enforcing turned on:

#				TEST 1 ENFORCE=1
#
# ssh refuses rhost authentication
Sep 27 11:10:30 cvs ssh(pam_unix)[515]: authentication failure; logname= uid=0 euid=0 tty=NODEVssh ruser= rhost=scout.islandone.org  
user=root

# ssh accepts password as valid
Sep 27 11:10:37 cvs sshd[515]: Accepted password for root from 10.0.0.25 port 2968 ssh2

# ssh sets security context
Sep 27 11:10:37 cvs sshd[515]: default security context is root:staff_r:staff_t

# ssh has a pty now
Sep 27 11:10:37 cvs sshd[515]: setting tty /dev/pts/0 context to root:object_r:staff_devpts_t

# But it fails a test in sshpty.c where it does a stat on the file and compares the
# results of the stat. The failure is caused by st.gid = 0 instead of the expected 5.
# (DMA is a token on my debug statements)
Sep 27 11:10:37 cvs sshd[515]: fatal: DMA pty=/dev/pts/0 pwuid=0 stuid=0 gid=5 stgid=0 

# We see further failures as it tries to release the pty
Sep 27 11:10:37 cvs sshd[515]: error: chown /dev/pts/0 0 0 failed: Permission denied
Sep 27 11:10:37 cvs sshd[515]: error: chmod /dev/pts/0 0666 failed: Permission denied


#				TEST 1 ENFORCE=0
#
# First part is the same
Sep 27 11:32:45 cvs ssh(pam_unix)[559]: authentication failure; logname= uid=0 euid=0 tty=NODEVssh ruser= rhost=scout.islandone.org  
user=root
Sep 27 11:32:50 cvs sshd[559]: Accepted password for root from 10.0.0.25 port 2982 ssh2
Sep 27 11:32:50 cvs sshd[559]: default security context is root:staff_r:staff_t
Sep 27 11:32:50 cvs sshd[559]: setting tty /dev/pts/0 context to root:object_r:staff_devpts_t

# But it succeeds and the session is good and the connection works.
Sep 27 11:32:50 cvs ssh(pam_unix)[559]: session opened for user root by (uid=0)
Sep 27 11:32:50 cvs sshd[561]: setting security context to root:staff_r:staff_t

Has anyone a suggestion as to what is happening? There are no avc's at this point so
this looks like something deeper.


--
This message was distributed to subscribers of the selinux mailing list.
If you no longer wish to subscribe, send mail to majordomo@tycho.nsa.gov with
the words "unsubscribe selinux" without quotes as the message.

Re: ssh policy hassles

[Russell Coker]

[-- Attachment #1: Type: text/plain, Size: 1167 bytes --]

On Sat, 27 Sep 2003 23:33, you wrote:
> On Sat, Sep 27, 2003 at 02:32:45PM +0100, Dale Amon wrote:
> > Yep, with that I get more avc's, and by dumping the
> > newrules into a file I can get ssh working in enforcing mode.
> > Now all I have to do is figure out which is the critical one:
> >
> > allow sshd_t staff_devpts_t:chr_file { ioctl setattr };
>
> Although the above looks awfully suspicious! :-)

From my latest policy:
# Relabel and access ptys created by sshd
# ioctl is necessary for logout() processing for utmp entry and for w to
# display the tty.
allow $1_t $3:chr_file { relabelto read write getattr ioctl };
dontaudit $1_t $3:chr_file setattr;


But your error message seems to indicate that the setattr is required for your 
sshd.

I have attached my latest ssh policy, please try it out as-is and try changing 
the "dontaudit" to "allow" for the setattr operation.

-- 
http://www.coker.com.au/selinux/   My NSA Security Enhanced Linux packages
http://www.coker.com.au/bonnie++/  Bonnie++ hard drive benchmark
http://www.coker.com.au/postal/    Postal SMTP/POP benchmark
http://www.coker.com.au/~russell/  My home page

[-- Attachment #2: ssh.te --]
[-- Type: text/plain, Size: 5471 bytes --]

#DESC SSH - SSH daemon
#
# Authors:  Anthony Colatrella (NSA) <amcolat@epoch.ncsc.mil>
#           Stephen Smalley <sds@epoch.ncsc.mil>
#           Russell Coker <russell@coker.com.au>
# X-Debian-Packages: ssh
#

# sshd_exec_t is the type of the sshd executable.
# sshd_key_t is the type of the ssh private key files
type sshd_exec_t, file_type, exec_type, sysadmfile;
type sshd_key_t, file_type, sysadmfile;

type ssh_port_t, port_type;

ifdef(`inetd.te', `
ifdef(`run_ssh_inetd', `
define(`using_ssh_inetd', `')
')
')

define(`sshd_program_domain', `
# privowner is for changing the identity on the terminal device
# privfd is for passing the terminal file handle to the user process
# auth is for /etc/shadow
type $1_t, domain, privuser, privrole, privlog, privowner, privfd, auth, auth_chkpwd;
role system_r types $1_t;
dontaudit $1_t shadow_t:file { getattr read };
uses_shlib($1_t)
allow $1_t self:unix_dgram_socket create_socket_perms;
allow $1_t self:unix_stream_socket create_stream_socket_perms;
allow $1_t self:fifo_file rw_file_perms;
allow $1_t self:process { fork sigchld setsched };

dontaudit $1_t proc_t:dir search;

# do not allow statfs()
dontaudit $1_t fs_type:filesystem getattr;

allow $1_t bin_t:dir search;
allow $1_t bin_t:lnk_file read;

# Read /var.
allow $1_t var_t:dir { getattr search };

# Read /var/log.
allow $1_t var_log_t:dir search;

# Read /etc.
allow $1_t etc_t:dir search;
allow $1_t etc_t:{ file lnk_file } { getattr read };
allow $1_t etc_runtime_t:file { getattr read };
allow $1_t resolv_conf_t:file { getattr read };

# Read and write /dev/tty and /dev/null.
allow $1_t devtty_t:chr_file rw_file_perms;
allow $1_t { null_device_t zero_device_t }:chr_file rw_file_perms;

# Read /dev/random and /dev/zero.
allow $1_t random_device_t:chr_file r_file_perms;

can_network($1_t)

allow $1_t self:capability { sys_chroot sys_resource chown dac_override fowner fsetid setgid setuid sys_tty_config };
allow $1_t { home_root_t user_home_dir_type sysadm_home_dir_t }:dir { search getattr };

# Set exec context.
can_setexec($1_t)

# Allow shells to be run in sysadm_t as well.
# Commented out.  Use newrole rather than directly entering sysadm_t.
#domain_trans($1_t, shell_exec_t, sysadm_t)

# Update utmp.
allow $1_t initrc_var_run_t:file rw_file_perms;

# Update wtmp.
allow $1_t wtmp_t:file rw_file_perms;

# Get security policy decisions.
can_getsecurity($1_t)

ifdef(`OLD_SELINUX', `
# Obtain the SID to use for relabeling ptys
allow $1_t security_t:security change_sid;
')

# Allow read access to login context
allow $1_t default_context_t:file r_file_perms;

# Access key files
allow $1_t sshd_key_t:file { getattr read };

# Update /var/log/lastlog.
allow $1_t lastlog_t:file rw_file_perms;

read_locale($1_t)

# Can create ptys
can_create_pty($1, `, server_pty')
allow $1_t $1_devpts_t:chr_file { setattr getattr relabelfrom };
')dnl end sshd_program_domain

# macro for defining which domains a sshd can spawn
# $1_t is the domain of the sshd, $2 is the domain to be spawned, $3 is the
# type of the pty for the child
define(`sshd_spawn_domain', `
domain_trans($1_t, shell_exec_t, $2)
ifdef(`xauth.te', `
domain_trans($1_t, xauth_exec_t, $2)
')

# Signal the user domains.
allow $1_t $2:process signal;

# Relabel and access ptys created by sshd
# ioctl is necessary for logout() processing for utmp entry and for w to
# display the tty.
allow $1_t $3:chr_file { relabelto read write getattr ioctl };
dontaudit $1_t $3:chr_file setattr;

# inheriting stream sockets is needed for "ssh host command" as no pty
# is allocated
allow $2 $1_t:unix_stream_socket rw_stream_socket_perms;
')

#################################
#
# Rules for the sshd_t domain, et al.
#
# sshd_t is the domain for the sshd program.
# sshd_extern_t is the domain for ssh from outside our network
#
sshd_program_domain(sshd)
sshd_spawn_domain(sshd, unpriv_userdomain, userpty_type)

ifdef(`use_x_ports', `
# for X forwarding
allow sshd_t xserver_port_t:tcp_socket name_bind;
')

sshd_program_domain(sshd_extern)
sshd_spawn_domain(sshd_extern, user_mini_domain, mini_pty_type)

# for when the network connection breaks after running newrole -r sysadm_r
dontaudit sshd_t sysadm_devpts_t:chr_file setattr;

# Allow checking users mail at login
allow sshd_t { var_spool_t mail_spool_t }:dir search;
allow sshd_t mail_spool_t:lnk_file read;
allow sshd_t mail_spool_t:file getattr;

ifdef(`using_ssh_inetd', `
allow inetd_t ssh_port_t:tcp_socket name_bind;
domain_auto_trans(inetd_t, sshd_exec_t, sshd_t)
domain_trans(inetd_t, sshd_exec_t, sshd_extern_t)
allow { sshd_t sshd_extern_t } inetd_t:tcp_socket rw_socket_perms;
allow { sshd_t sshd_extern_t } var_run_t:dir { getattr search };
', `
allow { sshd_t sshd_extern_t } initrc_devpts_t:chr_file rw_file_perms;
allow { sshd_t sshd_extern_t } self:capability net_bind_service;
allow { sshd_t sshd_extern_t } ssh_port_t:tcp_socket name_bind;
domain_auto_trans(initrc_t, sshd_exec_t, sshd_t)
domain_trans(initrc_t, sshd_exec_t, sshd_extern_t)

# Inherit and use descriptors from init.
allow { sshd_t sshd_extern_t } init_t:fd use;

# Create /var/run/sshd.pid
var_run_domain(sshd)
var_run_domain(sshd_extern)
')

undefine(`sshd_program_domain')

# so a tunnel can point to another ssh tunnel...
can_tcp_connect(sshd_t, sshd_t)

tmp_domain(sshd)




# Type for the ssh executable.
type ssh_exec_t, file_type, exec_type, sysadmfile;

# Everything else is in the ssh_domain macro in
# macros/program/ssh_macros.te.

Re: ssh policy hassles

[Dale Amon]

On Sun, Sep 28, 2003 at 12:13:29AM +1000, Russell Coker wrote:
> But your error message seems to indicate that the setattr is required for your 
> sshd.
> 
> I have attached my latest ssh policy, please try it out as-is and try changing 
> the "dontaudit" to "allow" for the setattr operation.

Results:

with latest policy.tgz		FAIL
add  your new ssh.te		FAIL
add  staff_devpts_t 		SUCCESS

This single line does it:

	allow sshd_t staff_devpts_t:chr_file { ioctl setattr }

I don't know yet if both attributes are required. It's getting
late and it's a night...


--
This message was distributed to subscribers of the selinux mailing list.
If you no longer wish to subscribe, send mail to majordomo@tycho.nsa.gov with
the words "unsubscribe selinux" without quotes as the message.

SELinux & UML FAQ

[Nick Davis]

Is there anything special required for getting UML working with 2.6
SELinux?  I've downloaded the patch and
applied it to 2.6.0-test3, which seemed to work fine.  But I get errors
when doing a 'make linux ARCH=um' as
suggested on the UML website documentation.  I was wondering if anything
has changed since the 2.4.x days; the docs are at least a couple years old.

Thanks,

Nick Davis
Center for Information Security
University of Tulsa



--
This message was distributed to subscribers of the selinux mailing list.
If you no longer wish to subscribe, send mail to majordomo@tycho.nsa.gov with
the words "unsubscribe selinux" without quotes as the message.

Re: SELinux & UML FAQ

[Stephen Smalley]

On Mon, 2003-09-29 at 16:27, Nick Davis wrote:
> Is there anything special required for getting UML working with 2.6
> SELinux?  I've downloaded the patch and
> applied it to 2.6.0-test3, which seemed to work fine.  But I get errors
> when doing a 'make linux ARCH=um' as
> suggested on the UML website documentation.  I was wondering if anything
> has changed since the 2.4.x days; the docs are at least a couple years old.

I'd suggest using a newer kernel, as 2.6.0-test3 is fairly old.  We
should have an updated release on the NSA site soon based on 2.6.0-test6
along with updated userland components.  We did update the sourceforge
CVS tree last week, but that was prior to the release of 2.6.0-test6.

As for UML, I think Russell Coker had a trivial one line patch for it
a while back, available under http://www.coker.com.au/uml/.

-- 
Stephen Smalley <sds@epoch.ncsc.mil>
National Security Agency


--
This message was distributed to subscribers of the selinux mailing list.
If you no longer wish to subscribe, send mail to majordomo@tycho.nsa.gov with
the words "unsubscribe selinux" without quotes as the message.

Re: SELinux & UML FAQ

[Russell Coker]

On Tue, 30 Sep 2003 06:27, Nick Davis wrote:
> Is there anything special required for getting UML working with 2.6
> SELinux?  I've downloaded the patch and
> applied it to 2.6.0-test3, which seemed to work fine.  But I get errors
> when doing a 'make linux ARCH=um' as
> suggested on the UML website documentation.  I was wondering if anything
> has changed since the 2.4.x days; the docs are at least a couple years old.

It's difficult to even guess at the problem you have when you don't include 
any of the error messages.

At this time I recommend 2.6.0-test5 as it's the latest kernel that I have got 
to compile with UML.  Hopefully a UML patch for test6 will be released soon.

For 2.6.0-test6 the nearest I got to compiling it was after applying the UML 
patch for 2.6.0-test5.  The compile didn't even get far enough to determine 
if the problems I've encountered before are still there.

-- 
http://www.coker.com.au/selinux/   My NSA Security Enhanced Linux packages
http://www.coker.com.au/bonnie++/  Bonnie++ hard drive benchmark
http://www.coker.com.au/postal/    Postal SMTP/POP benchmark
http://www.coker.com.au/~russell/  My home page


--
This message was distributed to subscribers of the selinux mailing list.
If you no longer wish to subscribe, send mail to majordomo@tycho.nsa.gov with
the words "unsubscribe selinux" without quotes as the message.