All of lore.kernel.org
 help / color / mirror / Atom feed
* [parisc-linux] Re: PALO boot loader installation problem
@ 2003-10-03 15:17 Diego de Fuentes Ceballos
  0 siblings, 0 replies; 4+ messages in thread
From: Diego de Fuentes Ceballos @ 2003-10-03 15:17 UTC (permalink / raw)
  To: bame; +Cc: diego, debian-hppa, parisc-linux

You were right, i was missing the F0 partition, i repartitioned my hard drive
and now everything is up and running, thanks for your help.

On Thu, 02 Oct 2003 13:51:03 -0600, bame@hp.com wrote:

> 
> 
> I cc-ed parisc-linux@parisc-linux.org
> 
> > Hey everyone, i am having sobe trouble installing Debian hppa on a HP b1000
> > , i
> > have downloaded and burnen a netinstall ISO with kernelm 2.4.22 and got
> > everything up and running, i booted from CD, i installed everything, partit=
> > ioned
> > the hard drive, got the network configured and the base system installed but
> > when i try to make the system installable i get this error:
> > 
> > 
> > Problem
> > 
> > PALO wasn=B4t able to install. You can still remote boot and point the root=
> >  device
> > to the installed system.
> 
> The most likely cause of this is the palo (aka F0) partition is past
> the 2G mark on the disk or perhaps is too small or maybe there's no
> partition at all.
> 
> > I have no idea how to fix this, "remote boot and point the dive to the inst=
> > alled
> > system?????" WTF???, when i reboot the machi and tri to point the boot load=
> > er to
> > the hard drive i get nowhere, can anyone give me hand?
> 
> Boot from the CD interactively so you can edit the boot command line.
> Get rid of the initrd= argument entirely and change the root=/dev/ram
> to root=/dev/sdaX where X is your root partition, then boot.  This'll
> use the kernel from the CD instead of the one in the palo partition.
> 
> If this works, have a look at your partition table or post it here or
> re-run palo by hand and examine (or post) the error messages.
> 
> 	-P

Diego De Fuentes Ceballos
diego@defuentes.org


-------------------------------------------------------------
Sign up for ICQmail at http://www.icq.com/icqmail/signup.html

^ permalink raw reply	[flat|nested] 4+ messages in thread
* [parisc-linux] Re: PALO boot loader installation problem
@ 2003-10-03 15:17 Diego de Fuentes Ceballos
  0 siblings, 0 replies; 4+ messages in thread
From: Diego de Fuentes Ceballos @ 2003-10-03 15:17 UTC (permalink / raw)
  To: bame; +Cc: diego, debian-hppa, parisc-linux

You were right, i was missing the F0 partition, i repartitioned my hard drive
and now everything is up and running, thanks for your help.

On Thu, 02 Oct 2003 13:51:03 -0600, bame@hp.com wrote:

> 
> 
> I cc-ed parisc-linux@parisc-linux.org
> 
> > Hey everyone, i am having sobe trouble installing Debian hppa on a HP b1000
> > , i
> > have downloaded and burnen a netinstall ISO with kernelm 2.4.22 and got
> > everything up and running, i booted from CD, i installed everything, partit=
> > ioned
> > the hard drive, got the network configured and the base system installed but
> > when i try to make the system installable i get this error:
> > 
> > 
> > Problem
> > 
> > PALO wasn=B4t able to install. You can still remote boot and point the root=
> >  device
> > to the installed system.
> 
> The most likely cause of this is the palo (aka F0) partition is past
> the 2G mark on the disk or perhaps is too small or maybe there's no
> partition at all.
> 
> > I have no idea how to fix this, "remote boot and point the dive to the inst=
> > alled
> > system?????" WTF???, when i reboot the machi and tri to point the boot load=
> > er to
> > the hard drive i get nowhere, can anyone give me hand?
> 
> Boot from the CD interactively so you can edit the boot command line.
> Get rid of the initrd= argument entirely and change the root=/dev/ram
> to root=/dev/sdaX where X is your root partition, then boot.  This'll
> use the kernel from the CD instead of the one in the palo partition.
> 
> If this works, have a look at your partition table or post it here or
> re-run palo by hand and examine (or post) the error messages.
> 
> 	-P

Diego De Fuentes Ceballos
diego@defuentes.org


-------------------------------------------------------------
Sign up for ICQmail at http://www.icq.com/icqmail/signup.html

^ permalink raw reply	[flat|nested] 4+ messages in thread
end of thread, other threads:[~2003-10-03 15:17 UTC | newest]

Thread overview: 4+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
     [not found] <20031002122111.29443.h007.c012.wm@mail.icqmail.com.criticalpath.net>
2003-10-02 19:51 ` [parisc-linux] Re: PALO boot loader installation problem bame
2003-10-02 19:51 ` bame
2003-10-03 15:17 Diego de Fuentes Ceballos
  -- strict thread matches above, loose matches on Subject: below --
2003-10-03 15:17 Diego de Fuentes Ceballos

This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.