From: Micah Anderson <micah@riseup.net>
To: linux-scsi@vger.kernel.org
Subject: Cannot get device recognized on a megaraid
Date: Mon, 24 Nov 2003 10:30:35 -0600 [thread overview]
Message-ID: <20031124163035.GK4399@riseup.net> (raw)
Hi,
I've been fighting a megaraid card with one device, just trying to get
it recognized. The card has the latest bios, the drive is in a RAID 0
container. Boot up doesn't show it at all:
megaraid: no BIOS enabled.
There are two other scsi devices that we have on the machine, they are
recognized fine:
Attached scsi disk sda at scsi0, channel 0, id 0, lun 0
Attached scsi disk sdb at scsi1, channel 0, id 2, lun 0
SCSI device sda: 17783240 512-byte hdwr sectors (9105 MB)
Partition check:
sda: sda1 sda2 sda3 sda4
sym53c875-0-<2,*>: FAST-20 SCSI 20.0 MB/s (50.0 ns, offset 15)
SCSI device sdb: 8888924 512-byte hdwr sectors (4551 MB)
sdb: sdb1
What do we need to do to get the drive attached to the megaraid card
recognized?
Thanks,
micah
next reply other threads:[~2003-11-24 16:30 UTC|newest]
Thread overview: 6+ messages / expand[flat|nested] mbox.gz Atom feed top
2003-11-24 16:30 Micah Anderson [this message]
2003-11-24 20:34 ` Cannot get device recognized on a megaraid Matt Domsch
2003-11-24 23:10 ` Micah Anderson
-- strict thread matches above, loose matches on Subject: below --
2003-11-24 23:00 Mukker, Atul
2003-11-24 23:21 Matt_Domsch
2003-11-25 0:58 ` Micah Anderson
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20031124163035.GK4399@riseup.net \
--to=micah@riseup.net \
--cc=linux-scsi@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.