From: Micah Anderson <micah@riseup.net>
To: Matt Domsch <Matt_Domsch@dell.com>
Cc: linux-scsi@vger.kernel.org
Subject: Re: Cannot get device recognized on a megaraid
Date: Mon, 24 Nov 2003 17:10:58 -0600 [thread overview]
Message-ID: <20031124231058.GV4399@riseup.net> (raw)
In-Reply-To: <20031124143439.A18646@lists.us.dell.com>
[-- Attachment #1: Type: text/plain, Size: 859 bytes --]
On Mon, 24 Nov 2003, Matt Domsch wrote:
> > I've been fighting a megaraid card with one device, just trying to get
> > it recognized. The card has the latest bios, the drive is in a RAID 0
> > container.
>
> What kernel and version of the megaraid driver are you using?
Linux kernel 2.4.22, megaraid driver that is included in that
kernel... I looked around in the kernel source, but I could not find a
version number anywhere.
> What is the card type please? What does lspci -vv and lspci -vvn
> show for it?
I need to look up what the card type is, but until then...
I am attaching to this email two files, the first is lspci -vv output
and the second is lspci -vvn output.
>
> > megaraid: no BIOS enabled.
>
> That's fine, as long as you're not booting from it.
Nope, not booting.
>
> With the above information, we can help.
Thanks!
Micah
[-- Attachment #2: lspci-vv --]
[-- Type: text/plain, Size: 6366 bytes --]
Script started on Sun Nov 23 22:05:30 2003
\r^[[0m^[[27m^[[24m^[[Jraven% ^[[K\a\al\blspci -vv
00:00.0 Host bridge: Intel Corp. 440GX - 82443GX Host bridge
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B-
Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ >SERR- <PERR-
Latency: 64
Region 0: Memory at f4000000 (32-bit, prefetchable) [size=64M]
Capabilities: <available only to root>
00:01.0 PCI bridge: Intel Corp. 440GX - 82443GX AGP bridge (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle+ MemWINV+ VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap- 66Mhz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 64
Bus: primary=00, secondary=01, subordinate=01, sec-latency=64
BridgeCtl: Parity- SERR- NoISA+ VGA- MAbort- >Reset- FastB2B+
00:07.0 ISA bridge: Intel Corp. 82371AB PIIX4 ISA (rev 02)
Control: I/O+ Mem+ BusMaster+ SpecCycle+ MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B-
Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 0
00:07.1 IDE interface: Intel Corp. 82371AB PIIX4 IDE (rev 01) (prog-if 80 [Master])
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 64
Region 4: I/O ports at fcd0 [size=16]
00:07.2 USB Controller: Intel Corp. 82371AB PIIX4 USB (rev 01) (prog-if 00 [UHCI])
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 64
Interrupt: pin D routed to IRQ 19
Region 4: I/O ports at fce0 [size=32]
00:07.3 Bridge: Intel Corp. 82371AB PIIX4 ACPI (rev 02)
Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Interrupt: pin ? routed to IRQ 9
00:08.0 SCSI storage controller: Adaptec AIC-7880U (rev 01)
Subsystem: Adaptec AIC-7880P Ultra/Ultra Wide SCSI Chipset
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 64 (2000ns min, 2000ns max), cache line size 08
Interrupt: pin A routed to IRQ 16
Region 0: I/O ports at f800 [disabled] [size=256]
Region 1: Memory at fedff000 (32-bit, non-prefetchable) [size=4K]
Expansion ROM at <unassigned> [disabled] [size=64K]
Capabilities: <available only to root>
00:10.0 VGA compatible controller: Silicon Integrated Systems [SiS] 86C326 (rev 0b) (prog-if 00 [VGA])
Subsystem: Palit Microsystems Inc. SiS6326 GUI Accelerator
Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66Mhz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Interrupt: pin A routed to IRQ 17
Region 0: Memory at fe000000 (32-bit, prefetchable) [size=8M]
Region 1: Memory at fede0000 (32-bit, non-prefetchable) [size=64K]
Region 2: I/O ports at fc00 [size=128]
Expansion ROM at <unassigned> [disabled] [size=64K]
Capabilities: <available only to root>
00:11.0 RAID bus controller: CMD Technology Inc: Unknown device 0680 (rev 02)
Subsystem: LSI Logic / Symbios Logic (formerly NCR): Unknown device 0524
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 64, cache line size 08
Interrupt: pin A routed to IRQ 18
Region 0: I/O ports at fca8 [size=8]
Region 1: I/O ports at fcb8 [size=4]
Region 2: I/O ports at fcb0 [size=8]
Region 3: I/O ports at fcbc [size=4]
Region 4: I/O ports at fcc0 [size=16]
Region 5: Memory at fedfec00 (32-bit, non-prefetchable) [size=256]
Expansion ROM at <unassigned> [disabled] [size=512K]
Capabilities: <available only to root>
00:13.0 PCI bridge: Digital Equipment Corporation DECchip 21152 (rev 03) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 64, cache line size 08
Bus: primary=00, secondary=02, subordinate=02, sec-latency=68
I/O behind bridge: 0000e000-0000efff
Memory behind bridge: fbf00000-fbffffff
BridgeCtl: Parity- SERR- NoISA+ VGA- MAbort- >Reset- FastB2B-
Capabilities: <available only to root>
02:04.0 SCSI storage controller: LSI Logic / Symbios Logic (formerly NCR) 53c875 (rev 26)
Subsystem: LSI Logic / Symbios Logic (formerly NCR): Unknown device 1000
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr+ Stepping- SERR- FastB2B-
Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 72 (4250ns min, 16000ns max), cache line size 08
Interrupt: pin A routed to IRQ 19
Region 0: I/O ports at e800 [size=256]
Region 1: Memory at fbfff800 (32-bit, non-prefetchable) [size=256]
Region 2: Memory at fbffe000 (32-bit, non-prefetchable) [size=4K]
Expansion ROM at <unassigned> [disabled] [size=256K]
Capabilities: <available only to root>
02:05.0 Ethernet controller: Advanced Micro Devices [AMD] 79c970 [PCnet LANCE] (rev 36)
Subsystem: Hewlett-Packard Company Ethernet with LAN remote power Adapter
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 64 (6000ns min, 6000ns max)
Interrupt: pin A routed to IRQ 16
Region 0: I/O ports at ece0 [size=32]
Region 1: Memory at fbfff400 (32-bit, non-prefetchable) [size=32]
Expansion ROM at <unassigned> [disabled] [size=1M]
Capabilities: <available only to root>
\r^[[0m^[[27m^[[24m^[[Jraven% ^[[K
Script done on Sun Nov 23 22:05:37 2003
[-- Attachment #3: lspci-vvn --]
[-- Type: text/plain, Size: 5652 bytes --]
Script started on Sun Nov 23 22:05:45 2003
\r^[[0m^[[27m^[[24m^[[Jraven% ^[[Kl\blspci -vvn
00:00.0 Class 0600: 8086:71a0
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B-
Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ >SERR- <PERR-
Latency: 64
Region 0: Memory at f4000000 (32-bit, prefetchable) [size=64M]
Capabilities: <available only to root>
00:01.0 Class 0604: 8086:71a1
Control: I/O+ Mem+ BusMaster+ SpecCycle+ MemWINV+ VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap- 66Mhz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 64
Bus: primary=00, secondary=01, subordinate=01, sec-latency=64
BridgeCtl: Parity- SERR- NoISA+ VGA- MAbort- >Reset- FastB2B+
00:07.0 Class 0601: 8086:7110 (rev 02)
Control: I/O+ Mem+ BusMaster+ SpecCycle+ MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B-
Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 0
00:07.1 Class 0101: 8086:7111 (rev 01) (prog-if 80 [Master])
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 64
Region 4: I/O ports at fcd0 [size=16]
00:07.2 Class 0c03: 8086:7112 (rev 01)
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 64
Interrupt: pin D routed to IRQ 19
Region 4: I/O ports at fce0 [size=32]
00:07.3 Class 0680: 8086:7113 (rev 02)
Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Interrupt: pin ? routed to IRQ 9
00:08.0 Class 0100: 9004:8078 (rev 01)
Subsystem: 9004:7880
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 64 (2000ns min, 2000ns max), cache line size 08
Interrupt: pin A routed to IRQ 16
Region 0: I/O ports at f800 [disabled] [size=256]
Region 1: Memory at fedff000 (32-bit, non-prefetchable) [size=4K]
Expansion ROM at <unassigned> [disabled] [size=64K]
Capabilities: <available only to root>
00:10.0 Class 0300: 1039:6326 (rev 0b)
Subsystem: 1569:6326
Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66Mhz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Interrupt: pin A routed to IRQ 17
Region 0: Memory at fe000000 (32-bit, prefetchable) [size=8M]
Region 1: Memory at fede0000 (32-bit, non-prefetchable) [size=64K]
Region 2: I/O ports at fc00 [size=128]
Expansion ROM at <unassigned> [disabled] [size=64K]
Capabilities: <available only to root>
00:11.0 Class 0104: 1095:0680 (rev 02)
Subsystem: 1000:0524
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 64, cache line size 08
Interrupt: pin A routed to IRQ 18
Region 0: I/O ports at fca8 [size=8]
Region 1: I/O ports at fcb8 [size=4]
Region 2: I/O ports at fcb0 [size=8]
Region 3: I/O ports at fcbc [size=4]
Region 4: I/O ports at fcc0 [size=16]
Region 5: Memory at fedfec00 (32-bit, non-prefetchable) [size=256]
Expansion ROM at <unassigned> [disabled] [size=512K]
Capabilities: <available only to root>
00:13.0 Class 0604: 1011:0024 (rev 03)
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 64, cache line size 08
Bus: primary=00, secondary=02, subordinate=02, sec-latency=68
I/O behind bridge: 0000e000-0000efff
Memory behind bridge: fbf00000-fbffffff
BridgeCtl: Parity- SERR- NoISA+ VGA- MAbort- >Reset- FastB2B-
Capabilities: <available only to root>
02:04.0 Class 0100: 1000:000f (rev 26)
Subsystem: 1000:1000
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr+ Stepping- SERR- FastB2B-
Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 72 (4250ns min, 16000ns max), cache line size 08
Interrupt: pin A routed to IRQ 19
Region 0: I/O ports at e800 [size=256]
Region 1: Memory at fbfff800 (32-bit, non-prefetchable) [size=256]
Region 2: Memory at fbffe000 (32-bit, non-prefetchable) [size=4K]
Expansion ROM at <unassigned> [disabled] [size=256K]
Capabilities: <available only to root>
02:05.0 Class 0200: 1022:2000 (rev 36)
Subsystem: 103c:106e
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 64 (6000ns min, 6000ns max)
Interrupt: pin A routed to IRQ 16
Region 0: I/O ports at ece0 [size=32]
Region 1: Memory at fbfff400 (32-bit, non-prefetchable) [size=32]
Expansion ROM at <unassigned> [disabled] [size=1M]
Capabilities: <available only to root>
\r^[[0m^[[27m^[[24m^[[Jraven% ^[[K
Script done on Sun Nov 23 22:05:52 2003
next prev parent reply other threads:[~2003-11-24 23:11 UTC|newest]
Thread overview: 6+ messages / expand[flat|nested] mbox.gz Atom feed top
2003-11-24 16:30 Cannot get device recognized on a megaraid Micah Anderson
2003-11-24 20:34 ` Matt Domsch
2003-11-24 23:10 ` Micah Anderson [this message]
-- strict thread matches above, loose matches on Subject: below --
2003-11-24 23:00 Mukker, Atul
2003-11-24 23:21 Matt_Domsch
2003-11-25 0:58 ` Micah Anderson
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20031124231058.GV4399@riseup.net \
--to=micah@riseup.net \
--cc=Matt_Domsch@dell.com \
--cc=linux-scsi@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.