* PROBLEM: insertion of pcmcia Adaptec APA-1450A SlimSCSI causes errors
@ 2003-11-26 9:35 Daniel M. Newman
0 siblings, 0 replies; only message in thread
From: Daniel M. Newman @ 2003-11-26 9:35 UTC (permalink / raw)
To: linux-scsi
Insertion of pcmcia Adaptec APA-1450A SlimSCSI causes errors.
One normal beep occurs, nothing else visible or audible happens,
process [scsi_eh_0] is left running and can not be killed. The cardctl
and cardinfo processes are unable to suspend, eject or re-initialise
the card. This combination of card and hardware works normally on a
2.4.21 kernel.
syslog indicates a kernel null pointer problem (I think)
The error is consistent and repeatable (needs a reboot to get card
services working again)
hardware
--------
Gateway Solo 9300 notebook
Pentium III Coppermine 750MHz CPU
memory 294MB
2 PC Card sockets
2 USB ports
IEEE 1394 4-pin port
Adaptec APA-1450A SlimSCSI card connected to HP Scanjet 5P
ver_linux
---------
Linux daedalus 2.6.0-test10 #1 Wed Nov 26 12:04:17 EST 2003 i686 GNU/
Linux
Gnu C 3.3.2
Gnu make 3.80
util-linux 2.12
mount 2.12
module-init-tools 0.9.15-pre3
e2fsprogs 1.35-WIP
pcmcia-cs 3.2.5
PPP 2.4.2b3
nfs-utils 1.0.6
Linux C Library 2.3.2
Dynamic linker (ldd) 2.3.2
Procps 3.1.14
Net-tools 1.60
Console-tools 0.2.3
Sh-utils 5.0.91
Modules Loaded aha152x_cs ipt_state iptable_filter ip_tables
ip_conntrack_ftp ip_conntrack ppp_deflate zlib_deflate zlib_inflate
bsd_comp ppp_async ltserial serial_core ltmodem ppp_generic slhc
snd_pcm_oss snd_mixer_oss snd_es1968 snd_ac97_codec snd_pcm
snd_page_alloc snd_mpu401_uart sd_mod scsi_mod snd_rawmidi ide_cd cdrom
nfsd exportfs lockd sunrpc parport_pc lp parport binfmt_misc uhci_hcd
usbcore nls_iso8859_1 nls_cp437 button battery ac fan thermal processor
unix
syslog
------
kernel: cs: memory probe 0xa0000000-0xa0ffffff: clean.
cardmgr[302]: socket 0: Adaptec APA-1460 SlimSCSI
cardmgr[302]: executing: 'modprobe aha152x_cs'
kernel: Unable to handle kernel NULL pointer dereference at virtual
address 00000000
kernel: printing eip:
kernel: d2941764
kernel: *pde = 00000000
kernel: Oops: 0002 [#1]
kernel: CPU: 0
kernel: EIP: 0060:[__crc_snd_card_new+15788/1923471] Tainted: PF
kernel: EFLAGS: 00010286
kernel: EIP is at scsi_register+0x44/0x70 [scsi_mod]
kernel: eax: d15881b8 ebx: d1588000 ecx: 00000000 edx: d29fa094
kernel: esi: d29fa020 edi: d1013a50 ebp: 0000002b esp: d10137d4
kernel: ds: 007b es: 007b ss: 0068
kernel: Process cardmgr (pid: 302, threadinfo=d1012000 task=d1ac3300)
kernel: Stack: d29fa020 00000334 00000000 d1013a28 d29f0aac d29fa020
00000334 00002000
kernel: 00000500 035f0340 d14744e0 c4d87680 d1013a08 c4d87680
0000002b c022a0f5
kernel: c4d87680 00000286 d1013888 00000000 d1013a28 d1013a50
0000002b d29f04f1
kernel: Call Trace:
kernel: [__crc_snd_card_new+733428/1923471] aha152x_probe_one
+0x1c/0x430 [aha152x_cs]
kernel: [__crc_snd_card_new+733428/1923471] aha152x_probe_one
+0x1c/0x430 [aha152x_cs]
kernel: [CardServices+533/862] CardServices+0x215/0x35e
kernel: [__crc_snd_card_new+731961/1923471] aha152x_config_cs
+0x321/0x3d0 [aha152x_cs]
kernel: [yenta_set_mem_map+417/496] yenta_set_mem_map+0x1a1/0x1f0
kernel: [try_to_wake_up+169/352] try_to_wake_up+0xa9/0x160
kernel: [set_cis_map+64/288] set_cis_map+0x40/0x120
kernel: [read_cis_mem+300/416] read_cis_mem+0x12c/0x1a0
kernel: [read_cis_cache+259/400] read_cis_cache+0x103/0x190
kernel: [pcmcia_get_tuple_data+149/160] pcmcia_get_tuple_data
+0x95/0xa0
kernel: [pcmcia_parse_tuple+264/384] pcmcia_parse_tuple+0x108/0x180
kernel: [read_tuple+165/176] read_tuple+0xa5/0xb0
kernel: [yenta_set_mem_map+417/496] yenta_set_mem_map+0x1a1/0x1f0
kernel: [__crc_snd_card_new+732398/1923471] aha152x_event+0x76/0x120
[aha152x_cs]
kernel: [read_tuple+72/176] read_tuple+0x48/0xb0
kernel: [read_cis_cache+259/400] read_cis_cache+0x103/0x190
kernel: [pcmcia_get_next_tuple+588/688] pcmcia_get_next_tuple
+0x24c/0x2b0
kernel: [pcmcia_validate_cis+307/528] pcmcia_validate_cis+0x133/0x210
kernel: [do_get_write_access+727/1552] do_get_write_access
+0x2d7/0x610
kernel: [mempool_alloc+121/352] mempool_alloc+0x79/0x160
kernel: [autoremove_wake_function+0/80] autoremove_wake_function
+0x0/0x50
kernel: [mempool_alloc+121/352] mempool_alloc+0x79/0x160
kernel: [autoremove_wake_function+0/80] autoremove_wake_function
+0x0/0x50
kernel: [pcmcia_register_client+578/656] pcmcia_register_client
+0x242/0x290
kernel: [mempool_alloc+121/352] mempool_alloc+0x79/0x160
kernel: [yenta_set_mem_map+417/496] yenta_set_mem_map+0x1a1/0x1f0
kernel: [autoremove_wake_function+0/80] autoremove_wake_function
+0x0/0x50
kernel: [__crc_snd_card_new+732280/1923471] aha152x_event+0x0/0x120
[aha152x_cs]
kernel: [CardServices+430/862] CardServices+0x1ae/0x35e
kernel: [__crc_snd_card_new+730946/1923471] aha152x_attach+0xfa/0x140
[aha152x_cs]
kernel: [__crc_snd_card_new+732280/1923471] aha152x_event+0x0/0x120
[aha152x_cs]
kernel: [get_pcmcia_driver+52/80] get_pcmcia_driver+0x34/0x50
kernel: [bind_request+266/560] bind_request+0x10a/0x230
kernel: [ds_ioctl+1238/1552] ds_ioctl+0x4d6/0x610
kernel: [preempt_schedule+42/80] preempt_schedule+0x2a/0x50
kernel: [__crc_snd_ctl_find_id+850783/1085714] unix_dgram_sendmsg
+0x467/0x560 [unix]
kernel: [sock_sendmsg+152/208] sock_sendmsg+0x98/0xd0
kernel: [do_anonymous_page+284/512] do_anonymous_page+0x11c/0x200
kernel: [buffered_rmqueue+207/368] buffered_rmqueue+0xcf/0x170
kernel: [schedule+761/1424] schedule+0x2f9/0x590
kernel: [__wake_up_locked+33/48] __wake_up_locked+0x21/0x30
kernel: [default_wake_function+0/32] default_wake_function+0x0/0x20
kernel: [zap_pmd_range+75/112] zap_pmd_range+0x4b/0x70
kernel: [unmap_page_range+75/128] unmap_page_range+0x4b/0x80
kernel: [unmap_vmas+254/560] unmap_vmas+0xfe/0x230
kernel: [unmap_region+148/224] unmap_region+0x94/0xe0
kernel: [unmap_vma+72/144] unmap_vma+0x48/0x90
kernel: [unmap_vma_list+31/48] unmap_vma_list+0x1f/0x30
kernel: [do_munmap+330/400] do_munmap+0x14a/0x190
kernel: [sys_ioctl+256/640] sys_ioctl+0x100/0x280
kernel: [sys_munmap+68/112] sys_munmap+0x44/0x70
kernel: [syscall_call+7/11] syscall_call+0x7/0xb
kernel:
kernel: Code: 89 01 89 d8 8b 74 24 0c 8b 5c 24 08 83 c4 10 c3 8b 46 04
c7
/proc/cpuinfo
-------------
processor : 0
vendor_id : GenuineIntel
cpu family : 6
model : 8
model name : Pentium III (Coppermine)
stepping : 3
cpu MHz : 746.281
cache size : 256 KB
fdiv_bug : no
hlt_bug : no
f00f_bug : no
coma_bug : no
fpu : yes
fpu_exception : yes
cpuid level : 2
wp : yes
flags : fpu vme de pse tsc msr pae mce cx8 sep mtrr pge mca
cmov pat pse36 mmx fxsr sse
bogomips : 1474.56
/proc/modules
-------------
aha152x_cs 42644 1 - Live 0xd29f0000
ipt_state 1760 2 - Live 0xd2987000
iptable_filter 2688 1 - Live 0xd284a000
ip_tables 17824 2 ipt_state,iptable_filter, Live 0xd29dc000
ip_conntrack_ftp 72084 0 - Live 0xd29c2000
ip_conntrack 32464 2 ipt_state,ip_conntrack_ftp, Live 0xd29b9000
ppp_deflate 6144 1 - Live 0xd29a3000
zlib_deflate 22712 1 ppp_deflate, Live 0xd29b2000
zlib_inflate 22368 1 ppp_deflate, Live 0xd29ab000
bsd_comp 5952 0 - Live 0xd293c000
ppp_async 11456 1 - Live 0xd2927000
ltserial 6596 2 - Live 0xd2924000
serial_core 23552 1 ltserial, Live 0xd2980000
ltmodem 533168 1 ltserial, Live 0xd2a1f000
ppp_generic 26096 7 ppp_deflate,bsd_comp,ppp_async, Live 0xd2978000
slhc 7136 1 ppp_generic, Live 0xd28ad000
snd_pcm_oss 53700 0 - Live 0xd2989000
snd_mixer_oss 19264 2 snd_pcm_oss, Live 0xd28fb000
snd_es1968 32036 1 - Live 0xd291b000
snd_ac97_codec 54884 1 snd_es1968, Live 0xd292d000
snd_pcm 100612 2 snd_pcm_oss,snd_es1968, Live 0xd295e000
snd_page_alloc 11812 2 snd_es1968,snd_pcm, Live 0xd289f000
snd_mpu401_uart 7712 1 snd_es1968, Live 0xd289c000
sd_mod 15232 0 - Live 0xd28ef000
scsi_mod 118712 2 aha152x_cs,sd_mod, Live 0xd2940000
snd_rawmidi 24864 1 snd_mpu401_uart, Live 0xd28a5000
ide_cd 40836 0 - Live 0xd28e4000
cdrom 35072 1 ide_cd, Live 0xd2888000
nfsd 102096 8 - Live 0xd2901000
exportfs 6464 1 nfsd, Live 0xd2885000
lockd 64560 2 nfsd, Live 0xd28b0000
sunrpc 134152 2 nfsd,lockd, Live 0xd28c2000
parport_pc 36620 1 - Live 0xd2892000
lp 10656 0 - Live 0xd284c000
parport 43624 2 parport_pc,lp, Live 0xd285b000
binfmt_misc 10504 1 - Live 0xd283a000
uhci_hcd 32624 0 - Live 0xd2852000
usbcore 111164 3 uhci_hcd, Live 0xd2868000
nls_iso8859_1 3904 1 - Live 0xd2845000
nls_cp437 5568 1 - Live 0xd2842000
button 6008 0 - Live 0xd280e000
battery 9292 0 - Live 0xd283e000
ac 4876 0 - Live 0xd2813000
fan 3916 0 - Live 0xd2811000
thermal 13040 0 - Live 0xd2835000
processor 13700 1 thermal, Live 0xd2830000
unix 28368 342 - Live 0xd2817000
/proc/ioports
-------------
0000-001f : dma1
0020-0021 : pic1
0040-005f : timer
0060-006f : keyboard
0070-0077 : rtc
0080-008f : dma page reg
00a0-00a1 : pic2
00c0-00df : dma2
00f0-00ff : fpu
0170-0177 : ide1
01f0-01f7 : ide0
0368-036f : pnp 00:01
0376-0376 : ide1
0378-037a : parport0
0398-0399 : pnp 00:01
03c0-03df : vga+
03f6-03f6 : ide0
04d0-04d1 : pnp 00:01
0cf8-0cff : PCI conf1
1000-101f : 0000:00:07.2
1000-101f : uhci_hcd
1020-102f : 0000:00:07.1
1020-1027 : ide0
1028-102f : ide1
1030-1037 : 0000:00:0b.0
1030-1036 : ltserial
1040-105f : 0000:00:07.3
1040-104f : pnp 00:01
1400-14ff : 0000:00:08.0
1400-14ff : ESS Maestro
1800-18ff : 0000:00:0b.0
1800-18fe : ltserial
4000-40ff : PCI CardBus #02
4400-44ff : PCI CardBus #02
4800-48ff : PCI CardBus #06
4c00-4cff : PCI CardBus #06
8000-803f : 0000:00:07.3
9000-9fff : PCI Bus #01
9000-90ff : 0000:01:00.0
/proc/iomem
-----------
00000000-0009f7ff : System RAM
0009f800-0009ffff : reserved
000a0000-000bffff : Video RAM area
000e0000-000effff : Extension ROM
000f0000-000fffff : System ROM
00100000-11feffff : System RAM
00100000-0029e42b : Kernel code
0029e42c-0033deff : Kernel data
11ff0000-11fffbff : ACPI Tables
11fffc00-11ffffff : ACPI Non-volatile Storage
12000000-12000fff : 0000:00:0c.0
12000000-12000fff : yenta_socket
12001000-12001fff : 0000:00:0c.1
12001000-12001fff : yenta_socket
12400000-127fffff : PCI CardBus #02
12800000-12bfffff : PCI CardBus #02
12c00000-12ffffff : PCI CardBus #06
13000000-133fffff : PCI CardBus #06
a0000000-a0000fff : card services
f4000000-f4003fff : 0000:00:0c.2
f4004000-f40047ff : 0000:00:0c.2
f4004800-f40048ff : 0000:00:0b.0
f4004800-f40048fe : ltserial
f4100000-f5ffffff : PCI Bus #01
f4100000-f4100fff : 0000:01:00.0
f5000000-f5ffffff : 0000:01:00.0
f8000000-fbffffff : 0000:00:00.0
fff80000-ffffffff : reserved
lspci -vvv
----------
00:00.0 Host bridge: Intel Corp. 440BX/ZX/DX - 82443BX/ZX/DX Host
bridge (rev 03)
Subsystem: Gateway 2000: Unknown device 9300
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR+ FastB2B-
Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium
>TAbort- <TAbort- <MAbort+ >SERR- <PERR-
Latency: 64
Region 0: Memory at f8000000 (32-bit, prefetchable) [size=64M]
Capabilities: [a0] AGP version 1.0
Status: RQ=32 Iso- ArqSz=0 Cal=0 SBA+ ITACoh- GART64-
HTrans- 64bit- FW- AGP3- Rate=x1,x2
Command: RQ=1 ArqSz=0 Cal=0 SBA- AGP- GART64- 64bit-
FW- Rate=<none>
00:01.0 PCI bridge: Intel Corp. 440BX/ZX/DX - 82443BX/ZX/DX AGP bridge
(rev 03) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle+ MemWINV+ VGASnoop-
ParErr- Stepping- SERR- FastB2B-
Status: Cap- 66Mhz+ UDF- FastB2B- ParErr- DEVSEL=medium
>TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 128
Bus: primary=00, secondary=01, subordinate=01, sec-latency=64
I/O behind bridge: 00009000-00009fff
Memory behind bridge: f4100000-f5ffffff
Prefetchable memory behind bridge: fff00000-000fffff
BridgeCtl: Parity- SERR- NoISA+ VGA+ MAbort- >Reset- FastB2B+
00:07.0 ISA bridge: Intel Corp. 82371AB/EB/MB PIIX4 ISA (rev 02)
Control: I/O+ Mem+ BusMaster+ SpecCycle+ MemWINV- VGASnoop-
ParErr- Stepping- SERR- FastB2B-
Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium
>TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 0
00:07.1 IDE interface: Intel Corp. 82371AB/EB/MB PIIX4 IDE (rev 01)
(prog-if 80 [Master])
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR- FastB2B-
Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium
>TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 64
Region 4: I/O ports at 1020 [size=16]
00:07.2 USB Controller: Intel Corp. 82371AB/EB/MB PIIX4 USB (rev 01)
(prog-if 00 [UHCI])
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR- FastB2B-
Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium
>TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 64
Interrupt: pin D routed to IRQ 9
Region 4: I/O ports at 1000 [size=32]
00:07.3 Bridge: Intel Corp. 82371AB/EB/MB PIIX4 ACPI (rev 03)
Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR- FastB2B-
Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium
>TAbort- <TAbort- <MAbort- >SERR- <PERR-
Interrupt: pin ? routed to IRQ 9
00:08.0 Multimedia audio controller: ESS Technology ES1978 Maestro 2E
(rev 10)
Subsystem: Gateway 2000: Unknown device 9300
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium
>TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 64 (500ns min, 6000ns max)
Interrupt: pin A routed to IRQ 10
Region 0: I/O ports at 1400 [size=256]
Capabilities: [c0] Power Management version 2
Flags: PMEClk- DSI+ D1+ D2+ AuxCurrent=0mA PME(D0-,D1+,
D2+,D3hot+,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
00:0b.0 Communication controller: Lucent Microelectronics WinModem 56k
(rev 01)
Subsystem: Actiontec Electronics Inc: Unknown device 2000
Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium
>TAbort- <TAbort- <MAbort- >SERR- <PERR-
Interrupt: pin A routed to IRQ 11
Region 0: Memory at f4004800 (32-bit, non-prefetchable)
[size=256]
Region 1: I/O ports at 1030 [size=8]
Region 2: I/O ports at 1800 [size=256]
Capabilities: [f8] Power Management version 2
Flags: PMEClk- DSI+ D1- D2+ AuxCurrent=0mA PME(D0-,D1-,
D2+,D3hot+,D3cold+)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
00:0c.0 CardBus bridge: Texas Instruments PCI4450 PC card Cardbus
Controller
Subsystem: Gateway 2000: Unknown device 9300
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium
>TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 168, Cache Line Size: 0x08 (32 bytes)
Interrupt: pin A routed to IRQ 11
Region 0: Memory at 12000000 (32-bit, non-prefetchable)
[size=4K]
Bus: primary=00, secondary=02, subordinate=05, sec-latency=176
Memory window 0: 12400000-127ff000 (prefetchable)
Memory window 1: 12800000-12bff000
I/O window 0: 00004000-000040ff
I/O window 1: 00004400-000044ff
BridgeCtl: Parity- SERR- ISA- VGA- MAbort- >Reset+ 16bInt+
PostWrite+
16-bit legacy interface ports at 0001
00:0c.1 CardBus bridge: Texas Instruments PCI4450 PC card Cardbus
Controller
Subsystem: Gateway 2000: Unknown device 9300
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium
>TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 168, Cache Line Size: 0x08 (32 bytes)
Interrupt: pin A routed to IRQ 11
Region 0: Memory at 12001000 (32-bit, non-prefetchable)
[size=4K]
Bus: primary=00, secondary=06, subordinate=09, sec-latency=176
Memory window 0: 12c00000-12fff000 (prefetchable)
Memory window 1: 13000000-133ff000
I/O window 0: 00004800-000048ff
I/O window 1: 00004c00-00004cff
BridgeCtl: Parity- SERR- ISA- VGA- MAbort- >Reset+ 16bInt+
PostWrite+
16-bit legacy interface ports at 0001
00:0c.2 FireWire (IEEE 1394): Texas Instruments: Unknown device 8011
(prog-if 10 [OHCI])
Subsystem: Gateway 2000: Unknown device 9300
Control: I/O- Mem+ BusMaster- SpecCycle- MemWINV+ VGASnoop-
ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium
>TAbort- <TAbort- <MAbort- >SERR- <PERR-
Interrupt: pin C routed to IRQ 10
Region 0: Memory at f4004000 (32-bit, non-prefetchable)
[size=2K]
Region 1: Memory at f4000000 (32-bit, non-prefetchable)
[size=16K]
Capabilities: [44] Power Management version 1
Flags: PMEClk- DSI- D1- D2+ AuxCurrent=0mA PME(D0-,D1-,
D2+,D3hot+,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
01:00.0 VGA compatible controller: ATI Technologies Inc Rage Mobility
P/M AGP 2x (rev 64) (prog-if 00 [VGA])
Subsystem: Gateway 2000: Unknown device 9300
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping+ SERR- FastB2B-
Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium
>TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 66 (2000ns min), Cache Line Size: 0x08 (32 bytes)
Interrupt: pin A routed to IRQ 11
Region 0: Memory at f5000000 (32-bit, non-prefetchable)
[size=16M]
Region 1: I/O ports at 9000 [size=256]
Region 2: Memory at f4100000 (32-bit, non-prefetchable)
[size=4K]
Expansion ROM at <unassigned> [disabled] [size=128K]
Capabilities: [50] AGP version 1.0
Status: RQ=256 Iso- ArqSz=0 Cal=0 SBA+ ITACoh- GART64-
HTrans- 64bit- FW- AGP3- Rate=x1,x2
Command: RQ=1 ArqSz=0 Cal=0 SBA- AGP- GART64- 64bit-
FW- Rate=<none>
Capabilities: [5c] Power Management version 1
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0-,D1-,
D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
/proc/scsi/scsi
---------------
Attached devices:
^ permalink raw reply [flat|nested] only message in thread
only message in thread, other threads:[~2003-11-26 9:35 UTC | newest]
Thread overview: (only message) (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2003-11-26 9:35 PROBLEM: insertion of pcmcia Adaptec APA-1450A SlimSCSI causes errors Daniel M. Newman
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.