From: khali@linux-fr.org (Jean Delvare)
To: Marcelo Tosatti <marcelo.tosatti@cyclades.com>
Cc: LKML <linux-kernel@vger.kernel.org>,
LM Sensors <sensors@stimpy.netroedge.com>
Subject: [PATCH 2.4] i2c cleanups, second wave (5/5)
Date: Thu, 19 May 2005 06:24:31 +0000 [thread overview]
Message-ID: <20031225001157.6354b903.khali@linux-fr.org> (raw)
In-Reply-To: <20031224225707.749707e5.khali@linux-fr.org>
And finally, this patch adds documentation for the i2c-velleman driver,
and also fixes a typo (the device is refered to as K9000 in many places
while its real name is actually K8000).
I'll send a similar patch to Greg KH for Linux 2.6 in a few days.
Thanks!
diff -ruN linux-2.4.24-pre2/Documentation/Configure.help linux-2.4.24-pre2-k5/Documentation/Configure.help
--- linux-2.4.24-pre2/Documentation/Configure.help Tue Dec 23 22:19:41 2003
+++ linux-2.4.24-pre2-k5/Documentation/Configure.help Wed Dec 24 22:25:24 2003
@@ -19052,9 +19052,9 @@
<file:Documentation/modules.txt>.
The module will be called i2c-elv.o.
-Velleman K9000 adapter
+Velleman K8000 adapter
CONFIG_I2C_VELLEMAN
- This supports the Velleman K9000 parallel-port I2C adapter. Say Y
+ This supports the Velleman K8000 parallel-port I2C adapter. Say Y
if you own such an adapter.
This driver is also available as a module. If you want to compile
diff -ruN linux-2.4.24-pre2/Documentation/i2c/i2c-velleman linux-2.4.24-pre2-k5/Documentation/i2c/i2c-velleman
--- linux-2.4.24-pre2/Documentation/i2c/i2c-velleman Thu Jan 1 01:00:00 1970
+++ linux-2.4.24-pre2-k5/Documentation/i2c/i2c-velleman Wed Dec 24 22:25:24 2003
@@ -0,0 +1,23 @@
+i2c-velleman driver
+-------------------
+This is a driver for i2c-hw access for Velleman K8000 and other adapters.
+
+Useful links
+------------
+Velleman:
+ http://www.velleman.be/
+
+Velleman K8000 Howto:
+ http://howto.htlw16.ac.at/k8000-howto.html
+
+K8000 and K8005 libraries
+-------------------------
+The project has lead to new libs for the Velleman K8000 and K8005:
+LIBK8000 v1.99.1 and LIBK8005 v0.21
+
+With these libs, you can control the K8000 interface card and the K8005
+stepper motor card with the simple commands which are in the original
+Velleman software, like SetIOchannel, ReadADchannel, SendStepCCWFull and
+many more, using /dev/velleman.
+
+The libs can be found on http://groups.yahoo.com/group/k8000/files/linux/
diff -ruN linux-2.4.24-pre2/Documentation/i2c/summary linux-2.4.24-pre2-k5/Documentation/i2c/summary
--- linux-2.4.24-pre2/Documentation/i2c/summary Mon Dec 22 21:50:09 2003
+++ linux-2.4.24-pre2-k5/Documentation/i2c/summary Wed Dec 24 22:25:24 2003
@@ -71,5 +71,5 @@
i2c-ppc405: IBM 405xx processor I2C device (uses i2c-algo-ppc405) (NOT BUILT BY DEFAULT)
i2c-pport: Primitive parallel port adapter (uses i2c-algo-bit)
i2c-rpx: RPX board Motorola 8xx I2C device (uses i2c-algo-8xx) (NOT BUILT BY DEFAULT)
-i2c-velleman: Velleman K9000 parallel port adapter (uses i2c-algo-bit)
+i2c-velleman: Velleman K8000 parallel port adapter (uses i2c-algo-bit)
diff -ruN linux-2.4.24-pre2/drivers/i2c/Config.in linux-2.4.24-pre2-k5/drivers/i2c/Config.in
--- linux-2.4.24-pre2/drivers/i2c/Config.in Tue Dec 23 22:19:41 2003
+++ linux-2.4.24-pre2-k5/drivers/i2c/Config.in Wed Dec 24 22:25:47 2003
@@ -12,7 +12,7 @@
if [ "$CONFIG_I2C_ALGOBIT" != "n" ]; then
dep_tristate ' Philips style parallel port adapter' CONFIG_I2C_PHILIPSPAR $CONFIG_I2C_ALGOBIT $CONFIG_PARPORT
dep_tristate ' ELV adapter' CONFIG_I2C_ELV $CONFIG_I2C_ALGOBIT
- dep_tristate ' Velleman K9000 adapter' CONFIG_I2C_VELLEMAN $CONFIG_I2C_ALGOBIT
+ dep_tristate ' Velleman K8000 adapter' CONFIG_I2C_VELLEMAN $CONFIG_I2C_ALGOBIT
dep_tristate ' NatSemi SCx200 I2C using GPIO pins' CONFIG_SCx200_I2C $CONFIG_SCx200 $CONFIG_I2C_ALGOBIT
if [ "$CONFIG_SCx200_I2C" != "n" ]; then
int ' GPIO pin used for SCL' CONFIG_SCx200_I2C_SCL 12
diff -ruN linux-2.4.24-pre2/drivers/i2c/i2c-velleman.c linux-2.4.24-pre2-k5/drivers/i2c/i2c-velleman.c
--- linux-2.4.24-pre2/drivers/i2c/i2c-velleman.c Mon Dec 22 21:50:10 2003
+++ linux-2.4.24-pre2-k5/drivers/i2c/i2c-velleman.c Wed Dec 24 22:25:24 2003
@@ -1,5 +1,5 @@
/* ------------------------------------------------------------------------- */
-/* i2c-velleman.c i2c-hw access for Velleman K9000 adapters */
+/* i2c-velleman.c i2c-hw access for Velleman K8000 adapters */
/* ------------------------------------------------------------------------- */
/* Copyright (C) 1995-96, 2000 Simon G. Vogl
--
Jean Delvare
http://www.ensicaen.ismra.fr/~delvare/
WARNING: multiple messages have this Message-ID (diff)
From: Jean Delvare <khali@linux-fr.org>
To: Marcelo Tosatti <marcelo.tosatti@cyclades.com>
Cc: LKML <linux-kernel@vger.kernel.org>,
LM Sensors <sensors@stimpy.netroedge.com>
Subject: [PATCH 2.4] i2c cleanups, second wave (5/5)
Date: Thu, 25 Dec 2003 00:11:57 +0100 [thread overview]
Message-ID: <20031225001157.6354b903.khali@linux-fr.org> (raw)
In-Reply-To: <20031224225707.749707e5.khali@linux-fr.org>
And finally, this patch adds documentation for the i2c-velleman driver,
and also fixes a typo (the device is refered to as K9000 in many places
while its real name is actually K8000).
I'll send a similar patch to Greg KH for Linux 2.6 in a few days.
Thanks!
diff -ruN linux-2.4.24-pre2/Documentation/Configure.help linux-2.4.24-pre2-k5/Documentation/Configure.help
--- linux-2.4.24-pre2/Documentation/Configure.help Tue Dec 23 22:19:41 2003
+++ linux-2.4.24-pre2-k5/Documentation/Configure.help Wed Dec 24 22:25:24 2003
@@ -19052,9 +19052,9 @@
<file:Documentation/modules.txt>.
The module will be called i2c-elv.o.
-Velleman K9000 adapter
+Velleman K8000 adapter
CONFIG_I2C_VELLEMAN
- This supports the Velleman K9000 parallel-port I2C adapter. Say Y
+ This supports the Velleman K8000 parallel-port I2C adapter. Say Y
if you own such an adapter.
This driver is also available as a module. If you want to compile
diff -ruN linux-2.4.24-pre2/Documentation/i2c/i2c-velleman linux-2.4.24-pre2-k5/Documentation/i2c/i2c-velleman
--- linux-2.4.24-pre2/Documentation/i2c/i2c-velleman Thu Jan 1 01:00:00 1970
+++ linux-2.4.24-pre2-k5/Documentation/i2c/i2c-velleman Wed Dec 24 22:25:24 2003
@@ -0,0 +1,23 @@
+i2c-velleman driver
+-------------------
+This is a driver for i2c-hw access for Velleman K8000 and other adapters.
+
+Useful links
+------------
+Velleman:
+ http://www.velleman.be/
+
+Velleman K8000 Howto:
+ http://howto.htlw16.ac.at/k8000-howto.html
+
+K8000 and K8005 libraries
+-------------------------
+The project has lead to new libs for the Velleman K8000 and K8005:
+LIBK8000 v1.99.1 and LIBK8005 v0.21
+
+With these libs, you can control the K8000 interface card and the K8005
+stepper motor card with the simple commands which are in the original
+Velleman software, like SetIOchannel, ReadADchannel, SendStepCCWFull and
+many more, using /dev/velleman.
+
+The libs can be found on http://groups.yahoo.com/group/k8000/files/linux/
diff -ruN linux-2.4.24-pre2/Documentation/i2c/summary linux-2.4.24-pre2-k5/Documentation/i2c/summary
--- linux-2.4.24-pre2/Documentation/i2c/summary Mon Dec 22 21:50:09 2003
+++ linux-2.4.24-pre2-k5/Documentation/i2c/summary Wed Dec 24 22:25:24 2003
@@ -71,5 +71,5 @@
i2c-ppc405: IBM 405xx processor I2C device (uses i2c-algo-ppc405) (NOT BUILT BY DEFAULT)
i2c-pport: Primitive parallel port adapter (uses i2c-algo-bit)
i2c-rpx: RPX board Motorola 8xx I2C device (uses i2c-algo-8xx) (NOT BUILT BY DEFAULT)
-i2c-velleman: Velleman K9000 parallel port adapter (uses i2c-algo-bit)
+i2c-velleman: Velleman K8000 parallel port adapter (uses i2c-algo-bit)
diff -ruN linux-2.4.24-pre2/drivers/i2c/Config.in linux-2.4.24-pre2-k5/drivers/i2c/Config.in
--- linux-2.4.24-pre2/drivers/i2c/Config.in Tue Dec 23 22:19:41 2003
+++ linux-2.4.24-pre2-k5/drivers/i2c/Config.in Wed Dec 24 22:25:47 2003
@@ -12,7 +12,7 @@
if [ "$CONFIG_I2C_ALGOBIT" != "n" ]; then
dep_tristate ' Philips style parallel port adapter' CONFIG_I2C_PHILIPSPAR $CONFIG_I2C_ALGOBIT $CONFIG_PARPORT
dep_tristate ' ELV adapter' CONFIG_I2C_ELV $CONFIG_I2C_ALGOBIT
- dep_tristate ' Velleman K9000 adapter' CONFIG_I2C_VELLEMAN $CONFIG_I2C_ALGOBIT
+ dep_tristate ' Velleman K8000 adapter' CONFIG_I2C_VELLEMAN $CONFIG_I2C_ALGOBIT
dep_tristate ' NatSemi SCx200 I2C using GPIO pins' CONFIG_SCx200_I2C $CONFIG_SCx200 $CONFIG_I2C_ALGOBIT
if [ "$CONFIG_SCx200_I2C" != "n" ]; then
int ' GPIO pin used for SCL' CONFIG_SCx200_I2C_SCL 12
diff -ruN linux-2.4.24-pre2/drivers/i2c/i2c-velleman.c linux-2.4.24-pre2-k5/drivers/i2c/i2c-velleman.c
--- linux-2.4.24-pre2/drivers/i2c/i2c-velleman.c Mon Dec 22 21:50:10 2003
+++ linux-2.4.24-pre2-k5/drivers/i2c/i2c-velleman.c Wed Dec 24 22:25:24 2003
@@ -1,5 +1,5 @@
/* ------------------------------------------------------------------------- */
-/* i2c-velleman.c i2c-hw access for Velleman K9000 adapters */
+/* i2c-velleman.c i2c-hw access for Velleman K8000 adapters */
/* ------------------------------------------------------------------------- */
/* Copyright (C) 1995-96, 2000 Simon G. Vogl
--
Jean Delvare
http://www.ensicaen.ismra.fr/~delvare/
next prev parent reply other threads:[~2005-05-19 6:24 UTC|newest]
Thread overview: 12+ messages / expand[flat|nested] mbox.gz Atom feed top
2003-12-24 21:57 [PATCH 2.4] i2c cleanups, second wave Jean Delvare
2005-05-19 6:24 ` Jean Delvare
2003-12-24 22:12 ` [PATCH 2.4] i2c cleanups, second wave (1/5) Jean Delvare
2005-05-19 6:24 ` Jean Delvare
2003-12-24 22:32 ` [PATCH 2.4] i2c cleanups, second wave (2/5) Jean Delvare
2005-05-19 6:24 ` Jean Delvare
2003-12-24 22:42 ` [PATCH 2.4] i2c cleanups, second wave (3/5) Jean Delvare
2005-05-19 6:24 ` Jean Delvare
2003-12-24 23:03 ` [PATCH 2.4] i2c cleanups, second wave (4/5) Jean Delvare
2005-05-19 6:24 ` Jean Delvare
2003-12-24 23:11 ` Jean Delvare [this message]
2005-05-19 6:24 ` [PATCH 2.4] i2c cleanups, second wave (5/5) Jean Delvare
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20031225001157.6354b903.khali@linux-fr.org \
--to=khali@linux-fr.org \
--cc=linux-kernel@vger.kernel.org \
--cc=marcelo.tosatti@cyclades.com \
--cc=sensors@stimpy.netroedge.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.