All of lore.kernel.org
 help / color / mirror / Atom feed
From: Daniel Brahneborg <basic@wtnord.net>
To: "Måns Rullgård" <mru@kth.se>
Cc: Daniel Brahneborg <basic@wtnord.net>,
	linux-raid@vger.kernel.org, linux-ide@vger.kernel.org
Subject: Re: RAID5 over Serial-ATA success stories?
Date: Thu, 8 Jan 2004 09:27:44 +0100	[thread overview]
Message-ID: <20040108092744.B2500@nettis.grimsta> (raw)
In-Reply-To: <yw1x65fm984p.fsf@ford.guide>; from mru@kth.se on Thu, Jan 08, 2004 at 09:06:46AM +0100

On Thu, Jan 08, 2004 at 09:06:46AM +0100, Måns Rullgård wrote:
> Daniel Brahneborg <basic@wtnord.net> writes:
> >> > It doesn't work with Silicon Image.
> >> 
> >> What doesn't work?  There are drivers, at least in 2.6.  Raid should
> >> care about what sort of disks you use.
> >
> > When using it for normal disks e2fsck reports bad blocks all
> > over the disk. When used for RAID, I get corrupted data.  Not
> > much, maybe every second time for a file of 500MB.
> > This is with the IDE driver.  With the SCSI driver, my computer
> > completely freezes when I activate my second network card (as I
> > reported earlier, unfortunately still without a solution).
> > RAID might work with that driver, but unless the network card
> > problem is solved, that doesn't help me.
> 
> That sounds rather odd.  Have you reported this to the appropriate
> places?

I emailed the persons in the MAINTAINERS file that seemed
relevant (Jeff Garzik, mainly).  I don't really know where
else to go, I'm afraid.

> >> > It doesn't work with VIA (yet, anyway).
> >> > It might work with HighPoint.
> >> 
> >> I've run RAID5 on a Highpoint RocketRAID 1540.  I used ATA disks with
> >> SATA converters, though.  Works with both 2.4 and 2.6.
> >
> > Sounds good to hear.  It's the second cheapest card for me.
> 
> Beware that several people have reported some rather strange problems
> with the Highpoint cards.  You should get a deal to take it back if it
> doesn't work.

I buy most things from komplett.se, they're nice with returns.

> >> > I don't know if there's a driver for Adaptec.
> >> 
> >> Which Adaptec card?  The 12xx cards are fakeraid, but are supported as
> >> normal cards.  The 24xx cards are true hardware RAID cards.  Linux
> >> drivers exist for these, too.
> >
> > It's the 12xx cards that I'm looking at. I don't want hardware
> > RAID, since hardware RAID5 costs an infinite amount of money.
> 
> Not really.  The Adaptec 24xx cards cost about the same as the disks
> you attach to them.  I ordered one from a while ago, but the shop went
> bankrupt before I got it, or at least their web site disappeared and
> they stopped answering mail or phone calls.

The Adaptec card I found would cost $250, which is about $200
more than I can spend on it.  If I can't get RAID5 to work I'd
rather buy more disks and do RAID10.

> >> > In case I have to replace my Silicon Image card, what should I replace
> >> > it with?  I'm currently leaning towards Promise TX4 (or TX2 if the VIA
> >> > driver is completed).
> >> 
> >> I stay as far away as I can from Promise and VIA.  Anything is usually
> >> better than those two.
> >
> > Why the warning about Promise?
> 
> I've had some bad experience with them, that's all.  They appear to be
> incompatible with Alpha machines, but probably work better in PCs.

I have a PC, so I'm hoping for the best.  I'll still make sure
that I can return it if it fails.

/Basic

-
To unsubscribe from this list: send the line "unsubscribe linux-raid" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

  reply	other threads:[~2004-01-08  8:27 UTC|newest]

Thread overview: 6+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2004-01-07 21:36 RAID5 over Serial-ATA success stories? Daniel Brahneborg
2004-01-07 21:56 ` Måns Rullgård
2004-01-08  7:57   ` Daniel Brahneborg
2004-01-08  8:06     ` Måns Rullgård
2004-01-08  8:27       ` Daniel Brahneborg [this message]
2004-01-08 11:48     ` A.J.Dawson

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20040108092744.B2500@nettis.grimsta \
    --to=basic@wtnord.net \
    --cc=linux-ide@vger.kernel.org \
    --cc=linux-raid@vger.kernel.org \
    --cc=mru@kth.se \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.