All of lore.kernel.org
 help / color / mirror / Atom feed
* [LARTC] Multihomed router problems
@ 2004-01-08 15:07 Raúl Alexis Betancort Santana
  2004-01-08 15:32 ` Artūras Šlajus
  0 siblings, 1 reply; 2+ messages in thread
From: Raúl Alexis Betancort Santana @ 2004-01-08 15:07 UTC (permalink / raw)
  To: lartc


Hi all, i'm new at LARTC, and after reading the docs I found no solution to my 
problem ... 

On one side I have eth0 conected to the LAN, on the other side I have eth1 
conected to a switch and to 3 DSL routers with 3 diferent providers, and also 
eth2 conected to a cisco 2600 conected to a LDMS line.

I have readed the larct docs about multihomed conections to internet, but I'm 
been unable to setup the routes with iproute2. I have setup a default 
multihop route, but if I receive a ssh conection throught one of the DSL 
lines it get not answered by the same line, it's answered throught the 
default route, How could I change this? I want to begin by answering the 
traffic by the line it is coming in.

On eth1 I have 3 publics IP's, one from each DSL provider.

Any sugestions? .. 
_______________________________________________
LARTC mailing list / LARTC@mailman.ds9a.nl
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/

^ permalink raw reply	[flat|nested] 2+ messages in thread

* Re: [LARTC] Multihomed router problems
  2004-01-08 15:07 [LARTC] Multihomed router problems Raúl Alexis Betancort Santana
@ 2004-01-08 15:32 ` Artūras Šlajus
  0 siblings, 0 replies; 2+ messages in thread
From: Artūras Šlajus @ 2004-01-08 15:32 UTC (permalink / raw)
  To: lartc

Raúl Alexis Betancort Santana wrote:

> Hi all, i'm new at LARTC, and after reading the docs I found no solution to my 
> problem ... 
> 
> On one side I have eth0 conected to the LAN, on the other side I have eth1 
> conected to a switch and to 3 DSL routers with 3 diferent providers, and also 
> eth2 conected to a cisco 2600 conected to a LDMS line.
> 
> I have readed the larct docs about multihomed conections to internet, but I'm 
> been unable to setup the routes with iproute2. I have setup a default 
> multihop route, but if I receive a ssh conection throught one of the DSL 
> lines it get not answered by the same line, it's answered throught the 
> default route, How could I change this? I want to begin by answering the 
> traffic by the line it is coming in.
Well. this should be done automatically otherwise it would break TCP/ip. I think you messed
up your config.
Mine setup with 2 ip's:
rasnet:/etc/blootbot# ip rule
0:      from all lookup local
32760:  from all to 213.226.172.0/24 lookup parabole
32761:  from all to 213.252.224.0/24 lookup parabole
32763:  from all to 213.226.161.0/24 lookup parabole
32764:  from all to 213.226.147.0/24 lookup parabole
32765:  from all to 213.226.146.0/24 lookup parabole
32766:  from all lookup main
32767:  from all lookup default
rasnet:/etc/blootbot# ip route
192.168.20.0/24 dev eth1  proto kernel  scope link  src 192.168.20.59
192.168.0.0/24 dev eth0  proto kernel  scope link  src 192.168.0.1
81.0.0.0/8 dev eth0  proto kernel  scope link  src 81.7.84.36
default via 81.7.84.1 dev eth0  src 81.7.84.36
rasnet:/etc/blootbot# ip route ls table parabole
default via 192.168.20.1 dev eth1



_______________________________________________
LARTC mailing list / LARTC@mailman.ds9a.nl
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/

^ permalink raw reply	[flat|nested] 2+ messages in thread

end of thread, other threads:[~2004-01-08 15:32 UTC | newest]

Thread overview: 2+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2004-01-08 15:07 [LARTC] Multihomed router problems Raúl Alexis Betancort Santana
2004-01-08 15:32 ` Artūras Šlajus

This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.