a7n8x-x

All of lore.kernel.org
 help / color / mirror / Atom feed

* a7n8x-x
@ 2004-01-17 10:22 backblue
  2004-01-17 12:08 ` a7n8x-x Bartlomiej Zolnierkiewicz
  0 siblings, 1 reply; 5+ messages in thread
From: backblue @ 2004-01-17 10:22 UTC (permalink / raw)
  To: linux-kernel

Hello,

For ppl with problems with a7n8x-x with chipset nforce2, that have problems with ide driver, and the machines hangs up, the solution it's upgrade the bios for the last release from the asus ftpd, i'm using version 1007, with 1005, that it's the default version, if we disable the suport in the kernel, for Nvidia id chipset, the machine works, but we dont have dma enable, and becomes impossible to work, and if we enable it, the machine hangs up every time, in 2.4 series it crashes less, but in 2.6.1, if i just compile anything the machine goes down, just upgrade the bios to this version, if not resolve, try to disable the APIC suporte on bios.

^ permalink raw reply	[flat|nested] 5+ messages in thread

* Re: a7n8x-x
  2004-01-17 10:22 a7n8x-x backblue
@ 2004-01-17 12:08 ` Bartlomiej Zolnierkiewicz
  2004-01-17 13:09   ` a7n8x-x backblue
  0 siblings, 1 reply; 5+ messages in thread
From: Bartlomiej Zolnierkiewicz @ 2004-01-17 12:08 UTC (permalink / raw)
  To: backblue; +Cc: linux-kernel

On Saturday 17 of January 2004 11:22, backblue wrote:
> Hello,

Hi,

> For ppl with problems with a7n8x-x with chipset nforce2, that have problems
> with ide driver, and the machines hangs up, the solution it's upgrade the

People with SCSI also reported lockups.

> bios for the last release from the asus ftpd, i'm using version 1007, with
> 1005, that it's the default version, if we disable the suport in the
> kernel, for Nvidia id chipset, the machine works, but we dont have dma
> enable, and becomes impossible to work, and if we enable it, the machine

This only makes problem less frequent (as reported by other people).

> hangs up every time, in 2.4 series it crashes less, but in 2.6.1, if i just
> compile anything the machine goes down, just upgrade the bios to this
> version, if not resolve, try to disable the APIC suporte on bios. -

If BIOS upgrade helped please send 'lspci -vvv -xxx' output from system
after/before BIOS upgrade, so we can try to catch the problem and add a fix
to kernel (there is no BIOS update for some motherboards).

Thanks!

--bart


^ permalink raw reply	[flat|nested] 5+ messages in thread

* Re: a7n8x-x
  2004-01-17 12:08 ` a7n8x-x Bartlomiej Zolnierkiewicz
@ 2004-01-17 13:09   ` backblue
  2004-01-17 13:17     ` a7n8x-x backblue
       [not found]     ` <200401171428.03300.bzolnier@elka.pw.edu.pl>
  0 siblings, 2 replies; 5+ messages in thread
From: backblue @ 2004-01-17 13:09 UTC (permalink / raw)
  To: Bartlomiej Zolnierkiewicz, linux-kernel

Here it is, lspci with version 1007, i dont have way to get a lspci with older version, but i think, if someone report some problem, just ask to the guy the lspci and check the diferences!
If you need anymore thing, just ask me, i have ide and scsi stuff, and my computer works great, i think if is a bios upgrade solved the problem, maybe the problem it's not on linux kernel. i dont change anything in the kernel, and it works great.

^ permalink raw reply	[flat|nested] 5+ messages in thread

* Re: a7n8x-x
  2004-01-17 13:09   ` a7n8x-x backblue
@ 2004-01-17 13:17     ` backblue
       [not found]     ` <200401171428.03300.bzolnier@elka.pw.edu.pl>
  1 sibling, 0 replies; 5+ messages in thread
From: backblue @ 2004-01-17 13:17 UTC (permalink / raw)
  To: linux-kernel

[-- Attachment #1: Type: text/plain, Size: 796 bytes --]

Sorry i missed the attach!

On Sat, 17 Jan 2004 13:09:35 +0000
backblue <backblue@netcabo.pt> wrote:

> Here it is, lspci with version 1007, i dont have way to get a lspci with older version, but i think, if someone report some problem, just ask to the guy the lspci and check the diferences!
> If you need anymore thing, just ask me, i have ide and scsi stuff, and my computer works great, i think if is a bios upgrade solved the problem, maybe the problem it's not on linux kernel. i dont change anything in the kernel, and it works great.
> -
> To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
> the body of a message to majordomo@vger.kernel.org
> More majordomo info at  http://vger.kernel.org/majordomo-info.html
> Please read the FAQ at  http://www.tux.org/lkml/

[-- Attachment #2: bios.1007 --]
[-- Type: application/octet-stream, Size: 27777 bytes --]

00:00.0 Host bridge: nVidia Corporation nForce2 AGP (different version?) (rev c1)
	Subsystem: Asustek Computer, Inc.: Unknown device 80ac
	Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
	Status: Cap+ 66Mhz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
	Latency: 0
	Region 0: Memory at d0000000 (32-bit, prefetchable) [size=128M]
	Capabilities: [40] AGP version 2.0
		Status: RQ=32 Iso- ArqSz=0 Cal=0 SBA+ ITACoh- GART64- HTrans- 64bit- FW+ AGP3- Rate=x1,x2,x4
		Command: RQ=1 ArqSz=0 Cal=0 SBA- AGP+ GART64- 64bit- FW- Rate=x4
	Capabilities: [60] #08 [2001]
00: de 10 e0 01 06 00 b0 00 c1 00 00 06 00 00 80 00
10: 08 00 00 d0 00 00 00 00 00 00 00 00 00 00 00 00
20: 00 00 00 00 00 00 00 00 00 00 00 00 43 10 ac 80
30: 00 00 00 00 40 00 00 00 00 00 00 00 00 00 00 00
40: 02 60 20 00 17 02 00 1f 04 01 00 00 ff ff ff ff
50: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
60: 08 00 01 20 20 00 88 80 10 00 00 00 01 ff 0f 9f
70: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
80: 0c 01 00 00 ff ff ff 1f 01 00 00 00 01 80 00 00
90: 0e 80 e0 f2 0e 80 e0 f0 f0 0f ff 00 00 00 00 00
a0: 00 00 00 00 d5 85 ee 00 00 00 00 00 00 00 00 00
b0: cc ff 07 00 00 00 00 00 00 00 00 00 00 00 00 00
c0: 33 33 03 00 00 00 00 00 00 00 00 00 00 00 00 00
d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
e0: 56 01 47 00 16 30 00 10 00 00 00 00 00 00 00 00
f0: 07 00 00 08 00 00 00 00 00 00 00 00 00 00 00 00

00:00.1 RAM memory: nVidia Corporation nForce2 Memory Controller 0 (rev c1)
	Subsystem: Asustek Computer, Inc.: Unknown device 80ac
	Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
	Status: Cap- 66Mhz+ UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
00: de 10 ea 01 00 00 20 00 c1 00 00 05 00 00 80 00
10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
20: 00 00 00 00 00 00 00 00 00 00 00 00 43 10 ac 80
30: 00 00 00 00 00 00 00 00 00 00 00 00 ff 00 00 00
40: 04 00 00 70 00 00 00 00 00 00 00 00 00 00 00 00
50: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
60: 16 05 42 81 01 00 00 00 01 00 00 00 01 00 00 00
70: 18 04 00 00 18 04 00 00 2c 07 00 01 40 07 00 01
80: 01 00 00 00 f2 13 0f 03 08 05 08 05 78 c8 a6 3f
90: 0b 8c 33 33 40 22 43 22 00 21 54 02 0d 22 77 07
a0: 6a 00 00 00 00 00 10 00 6a 00 00 00 00 00 10 00
b0: 6a 00 00 00 00 00 10 00 2a 00 00 00 01 00 10 00
c0: 10 31 22 02 00 00 00 00 00 00 00 00 ff ff 02 00
d0: 44 4e 00 00 22 22 00 00 0d 00 00 00 1e 00 00 00
e0: 1a 00 00 00 80 00 00 00 88 44 44 10 b1 04 30 40
f0: 10 18 1e 03 04 10 04 3f 09 44 1c 04 01 03 70 30

00:00.2 RAM memory: nVidia Corporation nForce2 Memory Controller 4 (rev c1)
	Subsystem: Asustek Computer, Inc.: Unknown device 80ac
	Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
	Status: Cap- 66Mhz+ UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
00: de 10 ee 01 00 00 20 00 c1 00 00 05 00 00 80 00
10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
20: 00 00 00 00 00 00 00 00 00 00 00 00 43 10 ac 80
30: 00 00 00 00 00 00 00 00 00 00 00 00 ff 00 00 00
40: 01 20 da 12 00 00 00 02 00 00 00 02 01 00 37 1f
50: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
60: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
70: ff 5f b5 06 ff ff 9d 00 ff 5f 5f 07 ff df 69 07
80: ff 5f e4 06 ff ff f8 02 ff ff 7d 02 ff ff ff 05
90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
b0: 00 00 ed 00 00 00 00 00 00 00 00 00 00 00 00 00
c0: 00 00 00 00 20 00 00 00 00 00 00 00 00 00 00 00
d0: 11 00 00 00 04 00 00 00 00 00 00 d0 ff ff ff d7
e0: 01 00 d4 1f 01 00 d5 1f 01 00 d4 1f 01 00 d5 1f
f0: 01 00 d4 1f 01 00 d5 1f 01 00 d4 1f 01 00 d5 1f

00:00.3 RAM memory: nVidia Corporation nForce2 Memory Controller 3 (rev c1)
	Subsystem: Asustek Computer, Inc.: Unknown device 80ac
	Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
	Status: Cap- 66Mhz+ UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
00: de 10 ed 01 00 00 20 00 c1 00 00 05 00 00 80 00
10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
20: 00 00 00 00 00 00 00 00 00 00 00 00 43 10 ac 80
30: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
40: 30 00 00 00 00 90 00 00 63 00 00 00 71 07 00 00
50: 76 06 00 00 72 95 00 00 68 ea 00 00 50 40 20 00
60: e9 00 00 00 00 06 f7 67 00 ea aa aa 88 ba 00 77
70: 01 80 a0 00 6a 00 00 00 03 10 01 20 55 00 02 01
80: ff ff 00 00 ff ff ff ff 00 00 00 00 00 00 00 00
90: ff 10 ff 10 00 00 00 00 00 00 00 00 00 00 00 00
a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
c0: ff 30 00 00 ff 30 00 00 00 00 00 00 00 00 00 00
d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
e0: 00 00 00 00 00 00 00 00 04 40 00 00 ff ff ff ff
f0: 1c 40 00 00 ff ff ff ff ff ff ff ff ff ff ff ff

00:00.4 RAM memory: nVidia Corporation nForce2 Memory Controller 2 (rev c1)
	Subsystem: Asustek Computer, Inc.: Unknown device 80ac
	Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
	Status: Cap- 66Mhz+ UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
00: de 10 ec 01 00 00 20 00 c1 00 00 05 00 00 80 00
10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
20: 00 00 00 00 00 00 00 00 00 00 00 00 43 10 ac 80
30: 00 00 00 00 00 00 00 00 00 00 00 00 ff 00 00 00
40: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
50: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
60: aa 33 aa 33 aa 33 aa 33 aa 33 aa 33 aa 33 aa 33
70: ff 99 ff 99 f0 00 00 00 7f 3f e0 0f aa 33 aa 33
80: ff 99 00 00 00 00 00 00 00 00 00 00 00 00 00 00
90: 47 47 45 45 45 45 45 45 11 11 10 10 10 10 10 10
a0: 00 00 00 00 a2 aa 00 80 00 00 00 00 5f 05 a0 00
b0: 78 56 34 12 ef cd ab 89 9b 4a 66 22 ee bd dc 8b
c0: 66 06 53 07 00 00 00 00 55 55 55 00 00 00 00 00
d0: ff 20 ff 20 ff 20 ff 7f 00 00 00 00 00 00 00 00
e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

00:00.5 RAM memory: nVidia Corporation nForce2 Memory Controller 5 (rev c1)
	Subsystem: Asustek Computer, Inc.: Unknown device 80ac
	Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
	Status: Cap- 66Mhz+ UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
00: de 10 ef 01 00 00 20 00 c1 00 00 05 00 00 80 00
10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
20: 00 00 00 00 00 00 00 00 00 00 00 00 43 10 ac 80
30: 00 00 00 00 00 00 00 00 00 00 00 00 ff 00 00 00
40: 00 00 00 00 00 00 00 00 39 e9 f4 09 39 e9 f4 09
50: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
60: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
b0: 00 00 00 00 ff ff ff 3f 00 00 00 00 ff ff ff 3f
c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

00:01.0 ISA bridge: nVidia Corporation nForce2 ISA Bridge (rev a4)
	Subsystem: Asustek Computer, Inc. A7N8X Mainboard
	Control: I/O+ Mem+ BusMaster+ SpecCycle+ MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
	Status: Cap+ 66Mhz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
	Latency: 0
	Capabilities: [48] #08 [01e1]
00: de 10 60 00 0f 00 b0 00 a4 00 01 06 00 00 80 00
10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
20: 00 00 00 00 00 00 00 00 00 00 00 00 43 10 ad 80
30: 00 00 00 00 48 00 00 00 00 00 00 00 00 00 00 00
40: 43 10 ad 80 de fd 3c 08 08 00 e1 01 60 00 88 08
50: a0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
60: 01 40 00 00 01 44 00 00 01 42 00 00 00 00 f8 ff
70: 10 00 ff ff 03 00 00 00 0f 00 40 00 b0 b5 00 00
80: 09 5b 00 00 b5 05 0b 00 3f 00 00 00 00 00 00 00
90: 00 00 33 00 00 00 00 00 00 00 00 00 00 00 00 00
a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
d0: cc 00 02 00 0a 00 00 00 00 00 00 00 00 00 00 00
e0: 00 11 00 07 1f 50 00 00 00 28 26 08 00 00 00 00
f0: 00 ff 00 00 00 00 00 00 00 00 00 00 00 00 00 00

00:01.1 SMBus: nVidia Corporation nForce2 SMBus (MCP) (rev a2)
	Subsystem: Asustek Computer, Inc.: Unknown device 0c11
	Control: I/O+ Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
	Status: Cap+ 66Mhz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
	Interrupt: pin A routed to IRQ 11
	Region 0: I/O ports at e400 [size=32]
	Capabilities: [44] Power Management version 2
		Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot+,D3cold+)
		Status: D0 PME-Enable- DSel=0 DScale=0 PME-
00: de 10 64 00 01 00 b0 00 a2 00 05 0c 00 00 80 00
10: 01 e4 00 00 00 00 00 00 00 00 00 00 00 00 00 00
20: 00 00 00 00 00 00 00 00 00 00 00 00 43 10 11 0c
30: 00 00 00 00 44 00 00 00 00 00 00 00 0b 01 03 01
40: 43 10 11 0c 01 00 02 c0 00 00 00 00 00 00 10 00
50: 01 50 00 00 01 55 00 00 00 00 00 00 00 00 00 00
60: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

00:02.0 USB Controller: nVidia Corporation nForce2 USB Controller (rev a4) (prog-if 10 [OHCI])
	Subsystem: Asustek Computer, Inc. A7N8X Mainboard
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
	Status: Cap+ 66Mhz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
	Latency: 0 (750ns min, 250ns max)
	Interrupt: pin A routed to IRQ 5
	Region 0: Memory at e4003000 (32-bit, non-prefetchable) [size=4K]
	Capabilities: [44] Power Management version 2
		Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold+)
		Status: D0 PME-Enable- DSel=0 DScale=0 PME-
00: de 10 67 00 07 00 b0 00 a4 10 03 0c 00 00 80 00
10: 00 30 00 e4 00 00 00 00 00 00 00 00 00 00 00 00
20: 00 00 00 00 00 00 00 00 00 00 00 00 43 10 11 0c
30: 00 00 00 00 44 00 00 00 00 00 00 00 05 01 03 01
40: 43 10 11 0c 01 00 02 fe 00 00 00 00 02 00 00 00
50: 00 00 00 00 1d 47 00 00 00 00 00 00 00 00 00 00
60: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

00:02.1 USB Controller: nVidia Corporation nForce2 USB Controller (rev a4) (prog-if 10 [OHCI])
	Subsystem: Asustek Computer, Inc. A7N8X Mainboard
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
	Status: Cap+ 66Mhz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
	Latency: 0 (750ns min, 250ns max)
	Interrupt: pin B routed to IRQ 11
	Region 0: Memory at e4004000 (32-bit, non-prefetchable) [size=4K]
	Capabilities: [44] Power Management version 2
		Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold+)
		Status: D0 PME-Enable- DSel=0 DScale=0 PME-
00: de 10 67 00 07 00 b0 00 a4 10 03 0c 00 00 80 00
10: 00 40 00 e4 00 00 00 00 00 00 00 00 00 00 00 00
20: 00 00 00 00 00 00 00 00 00 00 00 00 43 10 11 0c
30: 00 00 00 00 44 00 00 00 00 00 00 00 0b 02 03 01
40: 43 10 11 0c 01 00 02 fe 00 00 00 00 03 00 00 00
50: 00 00 00 00 1d 47 00 00 00 00 00 00 00 00 00 00
60: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

00:02.2 USB Controller: nVidia Corporation nForce2 USB Controller (rev a4) (prog-if 20 [EHCI])
	Subsystem: Asustek Computer, Inc. A7N8X Mainboard
	Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
	Status: Cap+ 66Mhz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
	Latency: 0 (750ns min, 250ns max)
	Interrupt: pin C routed to IRQ 5
	Region 0: Memory at e4005000 (32-bit, non-prefetchable) [size=256]
	Capabilities: [44] #0a [2080]
	Capabilities: [80] Power Management version 2
		Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold+)
		Status: D0 PME-Enable- DSel=0 DScale=0 PME-
00: de 10 68 00 06 00 b0 00 a4 20 03 0c 00 00 80 00
10: 00 50 00 e4 00 00 00 00 00 00 00 00 00 00 00 00
20: 00 00 00 00 00 00 00 00 00 00 00 00 43 10 11 0c
30: 00 00 00 00 44 00 00 00 00 00 00 00 05 03 03 01
40: 43 10 11 0c 0a 80 80 20 00 00 00 00 00 00 00 00
50: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
60: 20 20 01 00 00 60 98 81 c3 13 00 00 00 00 00 00
70: 00 00 00 05 00 10 20 80 89 3d 84 22 e7 25 04 80
80: 01 00 02 fe 00 00 00 00 00 00 00 00 15 16 00 00
90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
a0: 01 00 00 00 00 00 0c e0 00 00 00 00 00 00 00 00
b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

00:04.0 Ethernet controller: nVidia Corporation nForce2 Ethernet Controller (rev a1)
	Subsystem: Asustek Computer, Inc.: Unknown device 80a7
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
	Status: Cap+ 66Mhz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
	Latency: 0 (250ns min, 5000ns max)
	Interrupt: pin A routed to IRQ 5
	Region 0: Memory at e4000000 (32-bit, non-prefetchable) [size=4K]
	Region 1: I/O ports at d000 [size=8]
	Capabilities: [44] Power Management version 2
		Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold+)
		Status: D0 PME-Enable+ DSel=0 DScale=0 PME-
00: de 10 66 00 07 00 b0 00 a1 00 00 02 00 00 00 00
10: 00 00 00 e4 01 d0 00 00 00 00 00 00 00 00 00 00
20: 00 00 00 00 00 00 00 00 00 00 00 00 43 10 a7 80
30: 00 00 00 00 44 00 00 00 00 00 00 00 05 01 01 14
40: 43 10 a7 80 01 00 02 fe 00 01 00 00 04 00 00 00
50: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
60: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

00:06.0 Multimedia audio controller: nVidia Corporation nForce2 AC97 Audio Controler (MCP) (rev a1)
	Subsystem: Asustek Computer, Inc.: Unknown device 8095
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
	Status: Cap+ 66Mhz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
	Latency: 0 (500ns min, 1250ns max)
	Interrupt: pin A routed to IRQ 11
	Region 0: I/O ports at d400 [size=256]
	Region 1: I/O ports at d800 [size=128]
	Region 2: Memory at e4001000 (32-bit, non-prefetchable) [size=4K]
	Capabilities: [44] Power Management version 2
		Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
		Status: D0 PME-Enable- DSel=0 DScale=0 PME-
00: de 10 6a 00 07 00 b0 00 a1 00 01 04 00 00 00 00
10: 01 d4 00 00 01 d8 00 00 00 10 00 e4 00 00 00 00
20: 00 00 00 00 00 00 00 00 00 00 00 00 43 10 95 80
30: 00 00 00 00 44 00 00 00 00 00 00 00 0b 01 02 05
40: 43 10 95 80 01 00 02 06 00 00 00 00 06 01 00 00
50: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
60: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

00:08.0 PCI bridge: nVidia Corporation nForce2 External PCI Bridge (rev a3) (prog-if 00 [Normal decode])
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B-
	Status: Cap- 66Mhz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
	Latency: 0
	Bus: primary=00, secondary=01, subordinate=01, sec-latency=32
	I/O behind bridge: 0000c000-0000cfff
	Memory behind bridge: e2000000-e3ffffff
	Prefetchable memory behind bridge: fff00000-000fffff
	BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
00: de 10 6c 00 07 01 a0 00 a3 00 04 06 00 00 01 00
10: 00 00 00 00 00 00 00 00 00 01 01 20 c0 c0 80 a2
20: 00 e2 f0 e3 f0 ff 00 00 00 00 00 00 00 00 00 00
30: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 02 02
40: 00 00 00 00 01 00 02 00 03 00 00 00 08 0b 07 00
50: 0c 0d fe 1f 0e 0f 00 00 7c 00 00 00 00 00 00 00
60: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

00:09.0 IDE interface: nVidia Corporation nForce2 IDE (rev a2) (prog-if 8a [Master SecP PriP])
	Subsystem: Asustek Computer, Inc.: Unknown device 0c11
	Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
	Status: Cap+ 66Mhz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
	Latency: 0 (750ns min, 250ns max)
	Region 4: I/O ports at f000 [size=16]
	Capabilities: [44] Power Management version 2
		Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
		Status: D0 PME-Enable- DSel=0 DScale=0 PME-
00: de 10 65 00 05 00 b0 00 a2 8a 01 01 00 00 00 00
10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
20: 01 f0 00 00 00 00 00 00 00 00 00 00 43 10 11 0c
30: 00 00 00 00 44 00 00 00 00 00 00 00 00 00 03 01
40: 43 10 11 0c 01 00 02 00 00 00 00 00 00 09 00 00
50: 03 f0 00 00 00 00 00 00 a8 a8 a8 20 2a 00 99 20
60: 00 00 00 c6 00 00 00 00 00 00 00 00 00 00 00 00
70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
80: 00 00 00 00 00 d0 8a 06 00 00 02 30 00 00 00 00
90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

00:1e.0 PCI bridge: nVidia Corporation nForce2 AGP (rev c1) (prog-if 00 [Normal decode])
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B-
	Status: Cap- 66Mhz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
	Latency: 32
	Bus: primary=00, secondary=02, subordinate=02, sec-latency=32
	I/O behind bridge: 0000f000-00000fff
	Memory behind bridge: e0000000-e1ffffff
	Prefetchable memory behind bridge: d8000000-dfffffff
	BridgeCtl: Parity- SERR+ NoISA- VGA+ MAbort- >Reset- FastB2B-
00: de 10 e8 01 07 01 20 02 c1 00 04 06 00 20 01 00
10: 00 00 00 00 00 00 00 00 00 02 02 20 f0 00 20 22
20: 00 e0 f0 e1 00 d8 f0 df 00 00 00 00 00 00 00 00
30: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 0a 00
40: 01 00 00 00 00 00 f0 1f 20 00 00 00 ff ff ff ff
50: 00 00 00 d0 00 f0 ff d7 ff ff ff ff ff ff ff ff
60: ff 40 ff 40 00 00 00 20 00 00 00 00 ff ff ff ff
70: ff ff ff ff 00 00 00 00 00 00 00 00 ff ff ff ff
80: ff ff ff ff 00 80 00 00 68 01 00 00 ff ff ff ff
90: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
a0: 17 02 00 1f ff ff ff ff ff ff ff ff ff ff ff ff
b0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
c0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
d0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
e0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
f0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff

01:08.0 Multimedia audio controller: Creative Labs SB Live! EMU10k1 (rev 07)
	Subsystem: Creative Labs SB Live! 5.1 Model SB0100
	Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
	Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
	Latency: 32 (500ns min, 5000ns max)
	Interrupt: pin A routed to IRQ 5
	Region 0: I/O ports at c000 [size=32]
	Capabilities: [dc] Power Management version 1
		Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
		Status: D0 PME-Enable- DSel=0 DScale=0 PME-
00: 02 11 02 00 05 00 90 02 07 00 01 04 00 20 80 00
10: 01 c0 00 00 00 00 00 00 00 00 00 00 00 00 00 00
20: 00 00 00 00 00 00 00 00 00 00 00 00 02 11 64 80
30: 00 00 00 00 dc 00 00 00 00 00 00 00 05 01 02 14
40: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
50: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
60: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
d0: 00 00 00 00 00 00 00 00 00 00 00 00 01 00 01 06
e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

01:08.1 Input device controller: Creative Labs SB Live! MIDI/Game Port (rev 07)
	Subsystem: Creative Labs Gameport Joystick
	Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
	Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
	Latency: 32
	Region 0: I/O ports at c400 [size=8]
	Capabilities: [dc] Power Management version 1
		Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
		Status: D0 PME-Enable- DSel=0 DScale=0 PME-
00: 02 11 02 70 05 00 90 02 07 00 80 09 00 20 80 00
10: 01 c4 00 00 00 00 00 00 00 00 00 00 00 00 00 00
20: 00 00 00 00 00 00 00 00 00 00 00 00 02 11 20 00
30: 00 00 00 00 dc 00 00 00 00 00 00 00 00 00 00 00
40: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
50: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
60: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
d0: 00 00 00 00 00 00 00 00 00 00 00 00 01 00 01 06
e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

01:09.0 SCSI storage controller: Adaptec AIC-7861 (rev 03)
	Subsystem: Adaptec AHA-2940AU Single
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
	Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
	Latency: 32 (1000ns min, 1000ns max), cache line size 08
	Interrupt: pin A routed to IRQ 11
	Region 0: I/O ports at c800 [size=256]
	Region 1: Memory at e3000000 (32-bit, non-prefetchable) [size=4K]
	Expansion ROM at <unassigned> [disabled] [size=64K]
	Capabilities: [dc] Power Management version 1
		Flags: PMEClk- DSI+ D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
		Status: D0 PME-Enable- DSel=0 DScale=0 PME-
00: 04 90 78 61 07 00 90 02 03 00 00 01 08 20 00 00
10: 01 c8 00 00 00 00 00 e3 00 00 00 00 00 00 00 00
20: 00 00 00 00 00 00 00 00 00 00 00 00 04 90 61 78
30: 00 00 00 00 dc 00 00 00 00 00 00 00 0b 01 04 04
40: 80 11 00 80 80 11 00 80 00 00 00 00 00 00 00 00
50: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
60: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
d0: 00 00 00 00 00 00 00 00 00 00 00 00 01 00 21 00
e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

02:00.0 VGA compatible controller: nVidia Corporation NV17 [GeForce4 MX 420] (rev a3) (prog-if 00 [VGA])
	Subsystem: Asustek Computer, Inc.: Unknown device 8001
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
	Status: Cap+ 66Mhz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
	Latency: 248 (1250ns min, 250ns max)
	Interrupt: pin A routed to IRQ 11
	Region 0: Memory at e0000000 (32-bit, non-prefetchable) [size=16M]
	Region 1: Memory at d8000000 (32-bit, prefetchable) [size=64M]
	Region 2: Memory at dc000000 (32-bit, prefetchable) [size=512K]
	Expansion ROM at <unassigned> [disabled] [size=128K]
	Capabilities: [60] Power Management version 2
		Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
		Status: D0 PME-Enable- DSel=0 DScale=0 PME-
	Capabilities: [44] AGP version 2.0
		Status: RQ=32 Iso- ArqSz=0 Cal=0 SBA- ITACoh- GART64- HTrans- 64bit- FW+ AGP3- Rate=x1,x2,x4
		Command: RQ=32 ArqSz=0 Cal=0 SBA- AGP+ GART64- 64bit- FW- Rate=x4
00: de 10 72 01 07 00 b0 02 a3 00 00 03 00 f8 00 00
10: 00 00 00 e0 08 00 00 d8 08 00 00 dc 00 00 00 00
20: 00 00 00 00 00 00 00 00 00 00 00 00 43 10 01 80
30: 00 00 00 00 60 00 00 00 00 00 00 00 0b 01 05 01
40: 43 10 01 80 02 00 20 00 17 00 00 1f 04 01 00 1f
50: 01 00 00 00 01 00 00 00 ce d6 23 00 0f 00 00 00
60: 01 44 02 00 00 00 00 00 00 00 00 00 00 00 00 00
70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00


^ permalink raw reply	[flat|nested] 5+ messages in thread

[parent not found: <200401171428.03300.bzolnier@elka.pw.edu.pl>]

* Re: a7n8x-x
       [not found]     ` <200401171428.03300.bzolnier@elka.pw.edu.pl>
@ 2004-01-17 13:38       ` backblue
  0 siblings, 0 replies; 5+ messages in thread
From: backblue @ 2004-01-17 13:38 UTC (permalink / raw)
  To: Bartlomiej Zolnierkiewicz, linux-kernel

Yes, I can make a downgrade to my bios, i hope it helps someone!
It locks up in diferente weird ways, sometimes when booting, but almost appends when very much access to de disc! I will do the lspci and will send it to the lkml!

On Sat, 17 Jan 2004 14:28:03 +0100
Bartlomiej Zolnierkiewicz <B.Zolnierkiewicz@elka.pw.edu.pl> wrote:

> On Saturday 17 of January 2004 14:09, you wrote:
> > Here it is, lspci with version 1007, i dont have way to get a lspci with
> 
> You forgot to attach it :-).
> 
> > older version, but i think, if someone report some problem, just ask to the
> > guy the lspci and check the diferences! If you need anymore thing, just ask
> > me, i have ide and scsi stuff, and my computer works great, i think if is a
> > bios upgrade solved the problem, maybe the problem it's not on linux
> > kernel. i dont change anything in the kernel, and it works great.
> 
> You might probably downgrade BIOS and get lspci output if it kernel doesn't
> lockup immediately during boot.  Someone else may have different settings
> so PCI config will differ.
> 

^ permalink raw reply	[flat|nested] 5+ messages in thread

end of thread, other threads:[~2004-01-17 13:43 UTC | newest]

Thread overview: 5+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2004-01-17 10:22 a7n8x-x backblue
2004-01-17 12:08 ` a7n8x-x Bartlomiej Zolnierkiewicz
2004-01-17 13:09   ` a7n8x-x backblue
2004-01-17 13:17     ` a7n8x-x backblue
     [not found]     ` <200401171428.03300.bzolnier@elka.pw.edu.pl>
2004-01-17 13:38       ` a7n8x-x backblue

This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.