still hammerfall-mem on hdsp?

still hammerfall-mem on hdsp?

[Orm Finnendahl]

Hi,

hope this list is o.k. for this question:

I try to get the alsa-drivers for the hdsp compiled with alsa-cvs of
today. After successful compile the snd-hammerfall_mem module doesn't
seem to be compiled and thus can't get modprobed. Isn't it needed any
more? I couldn't find any information about that in the docs.

Maybe someone can help with configure options or anything to get the
module compiled (the snd-hammerfall_mem.c file is there but the .o
file is missing) if it is needed or what else to do to get the rme
working.

The docs I found reflect my last knowledge that you need to modprobe
snd-hammerfall_mem and snd-hdsp first and then run hdsploader to
install the firmware.


Thanks,
Orm


-------------------------------------------------------
The SF.Net email is sponsored by EclipseCon 2004
Premiere Conference on Open Tools Development and Integration
See the breadth of Eclipse activity. February 3-5 in Anaheim, CA.
http://www.eclipsecon.org/osdn

Re: still hammerfall-mem on hdsp?

[Tim Blechmann]

> Maybe someone can help with configure options or anything to get the
> module compiled (the snd-hammerfall_mem.c file is there but the .o
> file is missing) if it is needed or what else to do to get the rme
> working.
afaik the memory allocation for the hdsp moved from snd-hammerfall-mem
to snd-page-alloc...

you shouldn't need this...

 Tim                          mailto:TimBlechmann@gmx.de
                              ICQ: 96771783
--
The only people for me are the mad ones, the ones who are mad to live,
mad to talk, mad to be saved, desirous of everything at the same time,
the ones who never yawn or say a commonplace thing, but burn, burn,
burn, like fabulous yellow roman candles exploding like spiders across
the stars and in the middle you see the blue centerlight pop and
everybody goes "Awww!"
                                                          Jack Kerouac



-- 
 Tim                          mailto:TimBlechmann@gmx.de
                              ICQ: 96771783
--
The only people for me are the mad ones, the ones who are mad to live,
mad to talk, mad to be saved, desirous of everything at the same time,
the ones who never yawn or say a commonplace thing, but burn, burn,
burn, like fabulous yellow roman candles exploding like spiders across
the stars and in the middle you see the blue centerlight pop and
everybody goes "Awww!"
                                                          Jack Kerouac



-------------------------------------------------------
The SF.Net email is sponsored by EclipseCon 2004
Premiere Conference on Open Tools Development and Integration
See the breadth of Eclipse activity. February 3-5 in Anaheim, CA.
http://www.eclipsecon.org/osdn

Re: still hammerfall-mem on hdsp?

[Orm Finnendahl]

Am 17. Januar 2004, 14:31 Uhr (+0100) schrieb Tim Blechmann:
>
> you shouldn't need this...

Thanks. I get snd-hdsp loaded and the firmware uploaded. "cat
/proc/asound/card0/hdsp" looks good. But when I try to run alsamixer i
get 

no mixer elems found 

This is a freshly installed machine and I fear there are some missing
device links or something. I ran the snddevices script in alsa-driver.
Bear with me if this is stupid and just point me to appropriate
readmes if possible.

--
Orm


-------------------------------------------------------
The SF.Net email is sponsored by EclipseCon 2004
Premiere Conference on Open Tools Development and Integration
See the breadth of Eclipse activity. February 3-5 in Anaheim, CA.
http://www.eclipsecon.org/osdn

Re: still hammerfall-mem on hdsp?

[Justin Cormack]

On Sat, 2004-01-17 at 17:24, Orm Finnendahl wrote:
> Am 17. Januar 2004, 14:31 Uhr (+0100) schrieb Tim Blechmann:
> >
> > you shouldn't need this...
> 
> Thanks. I get snd-hdsp loaded and the firmware uploaded. "cat
> /proc/asound/card0/hdsp" looks good. But when I try to run alsamixer i
> get 
> 
> no mixer elems found 
> 
> This is a freshly installed machine and I fear there are some missing
> device links or something. I ran the snddevices script in alsa-driver.
> Bear with me if this is stupid and just point me to appropriate
> readmes if possible.

it doesnt have a mixer, other than the hardware matrix mixer.
Docs are on the website, but try

amixer cset numid=5 26,0,32768
amixer cset numid=5 27,1,32768

to route playback channels 1 and 2 to multiface analogue channels 1,2 or
digiface adat1 channels 1 and 2.




-------------------------------------------------------
The SF.Net email is sponsored by EclipseCon 2004
Premiere Conference on Open Tools Development and Integration
See the breadth of Eclipse activity. February 3-5 in Anaheim, CA.
http://www.eclipsecon.org/osdn

Re: still hammerfall-mem on hdsp?

[Jesse Chappell]

Justin Cormack wrote on Sat, 17-Jan-2004:

 > On Sat, 2004-01-17 at 17:24, Orm Finnendahl wrote:
 > > Am 17. Januar 2004, 14:31 Uhr (+0100) schrieb Tim Blechmann:
 > > >
 > > > you shouldn't need this...
 > > 
 > > Thanks. I get snd-hdsp loaded and the firmware uploaded. "cat
 > > /proc/asound/card0/hdsp" looks good. But when I try to run alsamixer i
 > > get 
 > > 
 > > no mixer elems found 
 > > 
 > > This is a freshly installed machine and I fear there are some missing
 > > device links or something. I ran the snddevices script in alsa-driver.
 > > Bear with me if this is stupid and just point me to appropriate
 > > readmes if possible.
 > 
 > it doesnt have a mixer, other than the hardware matrix mixer.
 > Docs are on the website, but try
 
You really need to use hdspmixer and hdspconf, they are available
in the alsa-tools (or utils, not sure).  The former is TotalMix
clone to give a full GUI to the powerful matrix mixer.  hdspconf
lets you set other settings (clock sync/rate, adat/optical input, etc)

jlc


-------------------------------------------------------
The SF.Net email is sponsored by EclipseCon 2004
Premiere Conference on Open Tools Development and Integration
See the breadth of Eclipse activity. February 3-5 in Anaheim, CA.
http://www.eclipsecon.org/osdn

Re: still hammerfall-mem on hdsp?

[Orm Finnendahl]

Am 17. Januar 2004, 18:04 Uhr (+0000) schrieb Justin Cormack:
>
> amixer cset numid=5 26,0,32768
> amixer cset numid=5 27,1,32768

alsaplayer works now. Thanks a lot!

--
Orm


-------------------------------------------------------
The SF.Net email is sponsored by EclipseCon 2004
Premiere Conference on Open Tools Development and Integration
See the breadth of Eclipse activity. February 3-5 in Anaheim, CA.
http://www.eclipsecon.org/osdn