[Bluez-users] Logitech Bluetooth Mx900+keyboard support.

[Bluez-users] Logitech Bluetooth Mx900+keyboard support.

[Terence Rudkin]

Hi,

Based on the archives, about a month ago, support for this did not
exist.  That is because of not being able to switch from HID to HCI
mode.   I am using the keyboard an mouse but would like to use the 
Bluetooth hub to connect my Palm T3.  


Has there been any progress on getting this to work?
Is there something I can do to help progress this?

-- 



-------------------------------------------------------
The SF.Net email is sponsored by EclipseCon 2004
Premiere Conference on Open Tools Development and Integration
See the breadth of Eclipse activity. February 3-5 in Anaheim, CA.
http://www.eclipsecon.org/osdn
_______________________________________________
Bluez-users mailing list
Bluez-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/bluez-users

Re: [Bluez-users] Logitech Bluetooth Mx900+keyboard support.

[Marcel Holtmann]

Hi Terence,

> Based on the archives, about a month ago, support for this did not
> exist.  That is because of not being able to switch from HID to HCI
> mode.   I am using the keyboard an mouse but would like to use the 
> Bluetooth hub to connect my Palm T3.  
> 
> 
> Has there been any progress on getting this to work?
> Is there something I can do to help progress this?

read the archives again. The hid2hci program from CVS supports the
Logitech Bluetooth hub.

Regards

Marcel




-------------------------------------------------------
The SF.Net email is sponsored by EclipseCon 2004
Premiere Conference on Open Tools Development and Integration
See the breadth of Eclipse activity. February 3-5 in Anaheim, CA.
http://www.eclipsecon.org/osdn
_______________________________________________
Bluez-users mailing list
Bluez-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/bluez-users

Re: [Bluez-users] Logitech Bluetooth Mx900+keyboard support.

[Michal Semler (volny.cz)]

Hmmm another util available only in CVS.

Marcel when will you finally release a new version of BlueZ supporting HID???

Michal

Dne ne 18. ledna 2004 21:44 Marcel Holtmann napsal(a):
> Hi Terence,
>
> > Based on the archives, about a month ago, support for this did not
> > exist.  That is because of not being able to switch from HID to HCI
> > mode.   I am using the keyboard an mouse but would like to use the
> > Bluetooth hub to connect my Palm T3.
> >
> >
> > Has there been any progress on getting this to work?
> > Is there something I can do to help progress this?
>
> read the archives again. The hid2hci program from CVS supports the
> Logitech Bluetooth hub.
>
> Regards
>
> Marcel
>
>
>
>
> -------------------------------------------------------
> The SF.Net email is sponsored by EclipseCon 2004
> Premiere Conference on Open Tools Development and Integration
> See the breadth of Eclipse activity. February 3-5 in Anaheim, CA.
> http://www.eclipsecon.org/osdn
> _______________________________________________
> Bluez-users mailing list
> Bluez-users@lists.sourceforge.net
> https://lists.sourceforge.net/lists/listinfo/bluez-users



-------------------------------------------------------
The SF.Net email is sponsored by EclipseCon 2004
Premiere Conference on Open Tools Development and Integration
See the breadth of Eclipse activity. February 3-5 in Anaheim, CA.
http://www.eclipsecon.org/osdn
_______________________________________________
Bluez-users mailing list
Bluez-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/bluez-users

Re: [Bluez-users] Logitech Bluetooth Mx900+keyboard support.

[Marcel Holtmann]

Hi Michal,

> Marcel when will you finally release a new version of BlueZ supporting HID???

when the library is ready and all programs are ported to the new
library. I want to have the same level of functionality as we have now.

However if you find a way to retrieve the complete HID report descriptor
with the current SDP library, we can include a bthid version for the
current libs.

Regards

Marcel




-------------------------------------------------------
The SF.Net email is sponsored by EclipseCon 2004
Premiere Conference on Open Tools Development and Integration
See the breadth of Eclipse activity. February 3-5 in Anaheim, CA.
http://www.eclipsecon.org/osdn
_______________________________________________
Bluez-users mailing list
Bluez-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/bluez-users

Re: [Bluez-users] Logitech Bluetooth Mx900+keyboard support.

[Terence Rudkin]

On Sun, 2004-01-18 at 13:44, Marcel Holtmann wrote:

> > 
> > Has there been any progress on getting this to work

> read the archives again. The hid2hci program from CVS supports the
> Logitech Bluetooth hub.

> Regards
> 
> Marcel
> 

Guess I did not get far enough.  Thanks
-- 

Re: [Bluez-users] Logitech Bluetooth Mx900+keyboard support.

[Terence Rudkin]

Marcel,

Thank you for pointing me to hid2hci  

I have downloaded and compiled hid2hci.  (gcc -Wall hid2hci.c -o hid2hci
) 
Running it I get:
 
 trudkin Last rc=1  07:43:17 /space/Bluez
 $> ./hid2hci -0
Switching device 046d:c703 to HCI mode was successful
 trudkin Last rc=0  07:43:20 /space/Bluez
 $> ./hid2hci -0
Switching device 046d:c703 to HCI mode was successful
 trudkin Last rc=0  07:43:22 /space/Bluez
 $> ./hid2hci -1
No devices in HID mode found
 trudkin Last rc=1  07:43:26 /space/Bluez
 $>
I can set to HCI twice and cannot reset to HID.  Leads me to believe
that it did not take.  I think all the right mods are loaded and hcid is
running.

#> lsmod |grep hci
usb-uhci               26380   0  (unused)
hci_usb                 9752   0  (unused)
bluez                  40324   1  (autoclean) [sco rfcomm l2cap hci_usb]
usbcore                79168   1  [usb-uhci hci_usb hid]
ohci1394               29128   0  (unused)
ieee1394              204612   0  [sbp2 ohci1394]


What am I missing? 

On Sun, 2004-01-18 at 13:44, Marcel Holtmann wrote:
> Hi Terence,
> 
> > Based on the archives, about a month ago, support for this did not
> > exist.  That is because of not being able to switch from HID to HCI
> > mode.   I am using the keyboard an mouse but would like to use the 
> > Bluetooth hub to connect my Palm T3.  
> > 
> > 
> > Has there been any progress on getting this to work?
> > Is there something I can do to help progress this?
> 
> read the archives again. The hid2hci program from CVS supports the
> Logitech Bluetooth hub.
> 
> Regards
> 
> Marcel
> 
-- 

Re: [Bluez-users] Logitech Bluetooth Mx900+keyboard support.

[Marcel Holtmann]

Hi Terence,

> Running it I get:
>  
>  trudkin Last rc=1  07:43:17 /space/Bluez
>  $> ./hid2hci -0
> Switching device 046d:c703 to HCI mode was successful
>  trudkin Last rc=0  07:43:20 /space/Bluez
>  $> ./hid2hci -0
> Switching device 046d:c703 to HCI mode was successful
>  trudkin Last rc=0  07:43:22 /space/Bluez
>  $> ./hid2hci -1
> No devices in HID mode found
>  trudkin Last rc=1  07:43:26 /space/Bluez
>  $>
> I can set to HCI twice and cannot reset to HID.  Leads me to believe
> that it did not take.  I think all the right mods are loaded and hcid is
> running.

do you have patched the USB HID driver?

Regards

Marcel




-------------------------------------------------------
The SF.Net email is sponsored by EclipseCon 2004
Premiere Conference on Open Tools Development and Integration
See the breadth of Eclipse activity. February 3-5 in Anaheim, CA.
http://www.eclipsecon.org/osdn
_______________________________________________
Bluez-users mailing list
Bluez-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/bluez-users

Re: [Bluez-users] Logitech Bluetooth Mx900+keyboard support.

[Terence Rudkin]

Marcel,

On Mon, 2004-01-19 at 05:22, Marcel Holtmann wrote:


> do you have patched the USB HID driver?
I am not sure.

I cvs'ed the Makefile.  Modified the SRCDIRS to include libs2 and
utils2,  removed hciemu.   Did a make update, to get every thing.  Then
made all the dirs and installed the executables  generated. 

Still the same error.s   Do I need something else to get the USB HID
driver?  


Thanks for your support! 
-- 

Re: [Bluez-users] Logitech Bluetooth Mx900+keyboard support.

[Olivier Bornet]

[-- Attachment #1: Type: text/plain, Size: 708 bytes --]

Hi Terence,

> > do you have patched the USB HID driver?
> I am not sure.

Look at the thread:

   http://sourceforge.net/mailarchive/message.php?msg_id=6881178

You need to patch your kernel for having hid2hci working. Note also that
at this time, you can only switch from hid to hci, and not from hci to
hid.

Hope this help.

Good day.

		Olivier
-- 
Olivier Bornet                 |      français : http://puck.ch/f
Swiss Ice Hockey Results       |      english  : http://puck.ch/e
http://puck.ch/                |      deutsch  : http://puck.ch/g
Olivier.Bornet@puck.ch         |      italiano : http://puck.ch/i
Get my PGP-key at http://puck.ch/pgp or at http://wwwkeys.pgp.net

[-- Attachment #2: Digital signature --]
[-- Type: application/pgp-signature, Size: 189 bytes --]

Re: [Bluez-users] Logitech Bluetooth Mx900+keyboard support.

[Marcel Holtmann]

Hi Olivier,

> Look at the thread:
> 
>    http://sourceforge.net/mailarchive/message.php?msg_id=6881178
> 
> You need to patch your kernel for having hid2hci working. Note also that
> at this time, you can only switch from hid to hci, and not from hci to
> hid.

at the moment nobody is quite sure if this patch is really correct and
don't break any other devices, but it is working for our needs and I
included it into my latest -mh patches for the 2.4 series.

Regards

Marcel




-------------------------------------------------------
The SF.Net email is sponsored by EclipseCon 2004
Premiere Conference on Open Tools Development and Integration
See the breadth of Eclipse activity. February 3-5 in Anaheim, CA.
http://www.eclipsecon.org/osdn
_______________________________________________
Bluez-users mailing list
Bluez-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/bluez-users

Re: [Bluez-users] Logitech Bluetooth Mx900+keyboard support.

[Terence Rudkin]

Marcel,

I finally had a chance to patch kernel and try hid2hci  with this patch
kernel.   I still got success. but hcitool dev never reported any
devices.   I looked at the code in hid2hci, my diff is below. 

I first made the change at 204.  And found that the /dev/usb/hid was not
opening.  Finding me /dev to be /dev/usb I changed line 79 to match my
file structure.   

Now I get
hciconfig
hci0:   Type: USB
        BD Address: 00:07:61:07:ED:A9 ACL MTU: 192:8  SCO MTU: 64:8
        UP RUNNING PSCAN ISCAN
        RX bytes:131 acl:0 sco:0 events:14 errors:0
        TX bytes:32 acl:0 sco:0 commands:13 errors:0

But not input from mouse and keyboard.


 #> cvs diff  hid2hci.c
Index: hid2hci.c
===================================================================
RCS file: /cvsroot/bluez/utils2/hid/hid2hci.c,v
retrieving revision 1.3
diff -r1.3 hid2hci.c
79c79
< static char hidpath[PATH_MAX + 1] = "/dev/usb/hid";
---
> static char hidpath[PATH_MAX + 1] = "/dev/usb";
204c204
<       int i, fd, err = 0;
---
>       int i, fd, err = -1;


On Tue, 2004-01-20 at 04:25, Marcel Holtmann wrote:
> Hi Olivier,
> 
> > Look at the thread:
> > 
> >    http://sourceforge.net/mailarchive/message.php?msg_id=6881178
> > 
> > You need to patch your kernel for having hid2hci working. Note also that
> > at this time, you can only switch from hid to hci, and not from hci to
> > hid.
> 
> at the moment nobody is quite sure if this patch is really correct and
> don't break any other devices, but it is working for our needs and I
> included it into my latest -mh patches for the 2.4 series.
> 
> Regards
> 
> Marcel
> 
-- 

Re: [Bluez-users] Logitech Bluetooth Mx900+keyboard support.

[Marcel Holtmann]

Hi Terence,

> I finally had a chance to patch kernel and try hid2hci  with this patch
> kernel.   I still got success. but hcitool dev never reported any
> devices.   I looked at the code in hid2hci, my diff is below. 
> 
> I first made the change at 204.  And found that the /dev/usb/hid was not
> opening.  Finding me /dev to be /dev/usb I changed line 79 to match my
> file structure.   

be more specific and make a unified diff.

> Now I get
> hciconfig
> hci0:   Type: USB
>         BD Address: 00:07:61:07:ED:A9 ACL MTU: 192:8  SCO MTU: 64:8
>         UP RUNNING PSCAN ISCAN
>         RX bytes:131 acl:0 sco:0 events:14 errors:0
>         TX bytes:32 acl:0 sco:0 commands:13 errors:0
> 
> But not input from mouse and keyboard.

The dongle is now in HCI mode and this means that you have to handle the
HID protocol by yourself. Run the bthid daemon.

Regards

Marcel




-------------------------------------------------------
The SF.Net email is sponsored by EclipseCon 2004
Premiere Conference on Open Tools Development and Integration
See the breadth of Eclipse activity. February 3-5 in Anaheim, CA.
http://www.eclipsecon.org/osdn
_______________________________________________
Bluez-users mailing list
Bluez-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/bluez-users

Re: [Bluez-users] Logitech Bluetooth Mx900+keyboard support.

[Terence Rudkin]

On Wed, 2004-01-28 at 01:00, Marcel Holtmann wrote:
> Hi Terence,
> 
> > I finally had a chance to patch kernel and try hid2hci  with this patch
> > kernel.   I still got success. but hcitool dev never reported any
> > devices.   I looked at the code in hid2hci, my diff is below. 
> > 
> > I first made the change at 204.  And found that the /dev/usb/hid was not
> > opening.  Finding me /dev to be /dev/usb I changed line 79 to match my
> > file structure.   
> 
> be more specific and make a unified diff.

I reviewed the code.  I focused on this section of code in
switch_logitech(...)
{
    char devname[PATH_MAX + 1];
    int i, fd, err = 0;
    for (i = 0; i < 16; i++) {
...
	sprintf(devname, "%s/hiddev%d", hidpath, i);
	fd = open(devname, O_RDWR);
	if (fd < 0)
		continue;
...
It occurred to me that open() could fail the 16 times and not report
that to the caller.  So i init'ed err to -1.  This is fine because  if
the open() works then err will be set based on the ioctl() or
send_report() calls.  But if open() fails all 16 time then the caller is
advised that something is wrong. 

Once I confirmed that in fact I was failing when I called hid2hci  I
went to understand why.  This was I had for dev dirtree. 
   /dev/usb/hiddev 
not
   /dev/usb/hid/hiddev 
as set in hidpath. So to work on my system I needed to change the
hidpath.   

While this works on my system.  What other systems might it break?   A
dynamic function to pull the correct value? Or is there a naming
authority, a header file, where this can be found?






 $> diff -dur hid2hci.c.orig hid2hci.c
--- hid2hci.c.orig      2004-01-27 12:57:42.000000000 -0700
+++ hid2hci.c   2004-01-27 12:59:29.000000000 -0700
@@ -76,7 +76,7 @@
 #define USB_DIR_OUT            0x00
  
  
-static char hidpath[PATH_MAX + 1] = "/dev/usb/hid";
+static char hidpath[PATH_MAX + 1] = "/dev/usb";
  
 struct hiddev_devinfo {
        unsigned int bustype;
@@ -201,7 +201,7 @@
 static int switch_logitech(struct device_info *dev)
 {
        char devname[PATH_MAX + 1];
-       int i, fd, err = 0;
+       int i, fd, err = -1;
  
        for (i = 0; i < 16; i++) {
                struct hiddev_devinfo dinfo;



> 
> Marcel
> 
-- 

Re: [Bluez-users] Logitech Bluetooth Mx900+keyboard support.

[Marcel Holtmann]

Hi Terence,

> I reviewed the code.  I focused on this section of code in
> switch_logitech(...)
> {
>     char devname[PATH_MAX + 1];
>     int i, fd, err = 0;
>     for (i = 0; i < 16; i++) {
> ...
> 	sprintf(devname, "%s/hiddev%d", hidpath, i);
> 	fd = open(devname, O_RDWR);
> 	if (fd < 0)
> 		continue;
> ...
> It occurred to me that open() could fail the 16 times and not report
> that to the caller.  So i init'ed err to -1.  This is fine because  if
> the open() works then err will be set based on the ioctl() or
> send_report() calls.  But if open() fails all 16 time then the caller is
> advised that something is wrong. 
> 
> Once I confirmed that in fact I was failing when I called hid2hci  I
> went to understand why.  This was I had for dev dirtree. 
>    /dev/usb/hiddev 
> not
>    /dev/usb/hid/hiddev 
> as set in hidpath. So to work on my system I needed to change the
> hidpath.   
> 
> While this works on my system.  What other systems might it break?   A
> dynamic function to pull the correct value? Or is there a naming
> authority, a header file, where this can be found?

I used the devfs path, because my Debian Sid has no default device node
for it. What is your system?

Regards

Marcel




-------------------------------------------------------
The SF.Net email is sponsored by EclipseCon 2004
Premiere Conference on Open Tools Development and Integration
See the breadth of Eclipse activity. February 3-5 in Anaheim, CA.
http://www.eclipsecon.org/osdn
_______________________________________________
Bluez-users mailing list
Bluez-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/bluez-users

Re: [Bluez-users] Logitech Bluetooth Mx900+keyboard support.

[Terence Rudkin]

Hi Marcel,


On Wed, 2004-01-28 at 09:32, Marcel Holtmann wrote:
> I used the devfs path, because my Debian Sid has no default device node
> for it. What is your system?
The most recent is Fedora, with the 2.6.1 kernel  

> Regards
> 
> Marcel
> 
Thanks for all the help!
-- 

Re: [Bluez-users] Logitech Bluetooth Mx900+keyboard support.

[Marcel Holtmann]

[-- Attachment #1: Type: text/plain, Size: 217 bytes --]

Hi Terence,

> > I used the devfs path, because my Debian Sid has no default device node
> > for it. What is your system?
> The most recent is Fedora, with the 2.6.1 kernel  

please try this patch.

Regards

Marcel


[-- Attachment #2: patch --]
[-- Type: text/x-patch, Size: 820 bytes --]

Index: hid2hci.c
===================================================================
RCS file: /cvsroot/bluez/utils2/hid/hid2hci.c,v
retrieving revision 1.3
diff -u -r1.3 hid2hci.c
--- hid2hci.c	6 Jan 2004 17:45:11 -0000	1.3
+++ hid2hci.c	28 Jan 2004 16:35:45 -0000
@@ -76,7 +76,7 @@
 #define USB_DIR_OUT		0x00
 
 
-static char hidpath[PATH_MAX + 1] = "/dev/usb/hid";
+static char hidpath[PATH_MAX + 1] = "/dev/usb";
 
 struct hiddev_devinfo {
 	unsigned int bustype;
@@ -211,8 +211,12 @@
 
 		sprintf(devname, "%s/hiddev%d", hidpath, i);
 		fd = open(devname, O_RDWR);
-		if (fd < 0)
-			continue;
+		if (fd < 0) {
+			sprintf(devname, "%s/hid/hiddev%d", hidpath, i);
+			fd = open(devname, O_RDWR);
+			if (fd < 0)
+				continue;
+		}
 
 		memset(&dinfo, 0, sizeof(dinfo));
 		err = ioctl(fd, HIDIOCGDEVINFO, &dinfo);

Re: [Bluez-users] Logitech Bluetooth Mx900+keyboard support.

[Terence Rudkin]

Hi Marcel,

Patch works fine.  But if neither path exist then it will silently
fail.  while not having /dev/usb should not be an issue, but ya never
know.  Presetting err to -1 resolves this. 

On Wed, 2004-01-28 at 12:16, Marcel Holtmann wrote:
> Hi Terence,
> 
> > > I used the devfs path, because my Debian Sid has no default device node
> > > for it. What is your system?
> > The most recent is Fedora, with the 2.6.1 kernel  
> 
> please try this patch.
> 
> Regards
> 
> Marcel
-- 

Re: [Bluez-users] Logitech Bluetooth Mx900+keyboard support.

[Marcel Holtmann]

Hi Terence,

> Patch works fine.  But if neither path exist then it will silently
> fail.  while not having /dev/usb should not be an issue, but ya never
> know.  Presetting err to -1 resolves this. 

I included this fix an committed it to the CVS. Everything should now
work fine. Thanks.

Regards

Marcel




-------------------------------------------------------
The SF.Net email is sponsored by EclipseCon 2004
Premiere Conference on Open Tools Development and Integration
See the breadth of Eclipse activity. February 3-5 in Anaheim, CA.
http://www.eclipsecon.org/osdn
_______________________________________________
Bluez-users mailing list
Bluez-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/bluez-users

Re: [Bluez-users] Logitech Bluetooth Mx900+keyboard support.

[Terence Rudkin]

Marcel,  et al,

The keyboard and mouse now work!  The last issue on getting them to work
was I needed to umount/mount the /proc/bus/usb file system. 

Actually just umount and reinsert the USB devices.  I restarted hcid and
bthid after umount'ing and before the insert.  Getting the right modules
in /etc/modules should be all that is needed. 

I'll get the steps needed I used put together as an addendum the the
MX900 page referenced eariler


Now to get the Tungsten T3 talking (passcode not exchanging) , but that
a different thread. 

Thanks again, Marcel, for all the help!! 
 
TR

T3 Was Re: [Bluez-users] Logitech Bluetooth Mx900+keyboard support.

[Gareth Reakes]

> Now to get the Tungsten T3 talking (passcode not exchanging) , but that
> a different thread.

I have just done so if you have a problem give me a shout. The only thing
I cant do now is look up computers on my internal subnet. I have no idea
how to fix this yet. I wanted to be able to control my slimp3 web
interface so if you get this working then give me a shout.

I have a three line script at home that works, so if you have any problems
then I will mail it to you.

Gareth


-------------------------------------------------------
The SF.Net email is sponsored by EclipseCon 2004
Premiere Conference on Open Tools Development and Integration
See the breadth of Eclipse activity. February 3-5 in Anaheim, CA.
http://www.eclipsecon.org/osdn
_______________________________________________
Bluez-users mailing list
Bluez-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/bluez-users

Re: T3 Was Re: [Bluez-users] Logitech Bluetooth Mx900+keyboard support.

[Terence Rudkin]

Gareth,

Thanks for the offer, got it up. Cleaned up the hcid.conf file to make
it work.   

As to not getting out of you own sunbet.  the script found here 
http://www.ibiblio.org/mdw/HOWTO/IP-Masquerade-HOWTO/firewall-examples.html#RC.FIREWALL-2.4.X
may be of assist.  
 
On Thu, 2004-01-29 at 06:12, Gareth Reakes wrote:
> > Now to get the Tungsten T3 talking (passcode not exchanging) , but that
> > a different thread.
> 
> I have just done so if you have a problem give me a shout. The only thing
> I cant do now is look up computers on my internal subnet. I have no idea
> how to fix this yet. I wanted to be able to control my slimp3 web
> interface so if you get this working then give me a shout.
> 
> I have a three line script at home that works, so if you have any problems
> then I will mail it to you.
> 
> Gareth
-- 



-------------------------------------------------------
The SF.Net email is sponsored by EclipseCon 2004
Premiere Conference on Open Tools Development and Integration
See the breadth of Eclipse activity. February 3-5 in Anaheim, CA.
http://www.eclipsecon.org/osdn
_______________________________________________
Bluez-users mailing list
Bluez-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/bluez-users

Re: [Bluez-users] Logitech Bluetooth Mx900+keyboard support.

[Charles Bueche]

Hi Terence (and Marcel),

I'm the maintainer of the MX900 page, so you can submit your changes
directly to me, I have some people waiting on my update.

Marcel, let me know when the CVS repo is updated.

Nothing urgent, my MX900 right button died, and I sent it to repair, I
should have it back in a few days.

Regs,
Charles

On Thu, 2004-01-29 at 04:29, Terence Rudkin wrote:
> Marcel,  et al,
> 
> The keyboard and mouse now work!  The last issue on getting them to work
> was I needed to umount/mount the /proc/bus/usb file system. 
> 
> Actually just umount and reinsert the USB devices.  I restarted hcid and
> bthid after umount'ing and before the insert.  Getting the right modules
> in /etc/modules should be all that is needed. 
> 
> I'll get the steps needed I used put together as an addendum the the
> MX900 page referenced eariler
...

Re: [Bluez-users] Logitech Bluetooth Mx900+keyboard support.

[Marcel Holtmann]

Hi Charles,

> I'm the maintainer of the MX900 page, so you can submit your changes
> directly to me, I have some people waiting on my update.
> 
> Marcel, let me know when the CVS repo is updated.

it is already there.

Regards

Marcel




-------------------------------------------------------
The SF.Net email is sponsored by EclipseCon 2004
Premiere Conference on Open Tools Development and Integration
See the breadth of Eclipse activity. February 3-5 in Anaheim, CA.
http://www.eclipsecon.org/osdn
_______________________________________________
Bluez-users mailing list
Bluez-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/bluez-users

Re: [Bluez-users] Logitech Bluetooth Mx900+keyboard support.

[Marcel Holtmann]

Hi Terence,

> I cvs'ed the Makefile.  Modified the SRCDIRS to include libs2 and
> utils2,  removed hciemu.   Did a make update, to get every thing.  Then
> made all the dirs and installed the executables  generated. 

if you want to use libs2 and utils2 from CVS follow my steps I posted to
the mailing list or take a look at this howto

	http://www.bueche.ch/comp/mx900/mx900.html

Regards

Marcel




-------------------------------------------------------
The SF.Net email is sponsored by EclipseCon 2004
Premiere Conference on Open Tools Development and Integration
See the breadth of Eclipse activity. February 3-5 in Anaheim, CA.
http://www.eclipsecon.org/osdn
_______________________________________________
Bluez-users mailing list
Bluez-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/bluez-users