[Bluez-users] Belkin CF card (F8T020)

[Bluez-users] Belkin CF card (F8T020)

[Jason Bell]

Hi

I've read through a lot of the BlueZ docs and got a basic build installed.  On closer inspection it seems that the Belkin PDA CF card is not supported.

I ran a plain BlueZ install to see if anything would happen, it appears not.

When I run 'hciconfig' I get the error message:

Can't open HCI socket.: Address family not supported by protocol.

Is there anything I, (or anyone else) can do?

Regards and thanks
Jase Bell





-------------------------------------------------------
The SF.Net email is sponsored by EclipseCon 2004
Premiere Conference on Open Tools Development and Integration
See the breadth of Eclipse activity. February 3-5 in Anaheim, CA.
http://www.eclipsecon.org/osdn
_______________________________________________
Bluez-users mailing list
Bluez-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/bluez-users

Re: [Bluez-users] Belkin CF card (F8T020)

[Marcel Holtmann]

Hi Jason,

> I've read through a lot of the BlueZ docs and got a basic build installed.  On closer inspection it seems that the Belkin PDA CF card is not supported.
> 
> I ran a plain BlueZ install to see if anything would happen, it appears not.
> 
> When I run 'hciconfig' I get the error message:
> 
> Can't open HCI socket.: Address family not supported by protocol.
> 
> Is there anything I, (or anyone else) can do?

what kernel modules do you have loaded?

Regards

Marcel




-------------------------------------------------------
The SF.Net email is sponsored by EclipseCon 2004
Premiere Conference on Open Tools Development and Integration
See the breadth of Eclipse activity. February 3-5 in Anaheim, CA.
http://www.eclipsecon.org/osdn
_______________________________________________
Bluez-users mailing list
Bluez-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/bluez-users

Re: [Bluez-users] Belkin CF card (F8T020)

[Jason Bell]

Marcel,
Sorry it's taken a little while to get back to you.

modprobe lists the following of use.

alias net-pf-31 bluez
alias bt-proto-0 l2cap
alias bt-proto-2 scp
alias bt-proto-3 rcomm
alias bt-proto-4bnep
alias tty-ldisc-15 hci_uart
alias char-major-10-250 hci_vhc1

So as far as I can see it looks like it has loaded okay.

The Zaurus powers down on its own accord now, I think the card is sapping power as it's fine in the cradle.

Any help would be great.

Regards
Jase Bell



-------------------------------------------------------
The SF.Net email is sponsored by EclipseCon 2004
Premiere Conference on Open Tools Development and Integration
See the breadth of Eclipse activity. February 3-5 in Anaheim, CA.
http://www.eclipsecon.org/osdn
_______________________________________________
Bluez-users mailing list
Bluez-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/bluez-users