[LARTC] two interfaces - borrowing bandwidth...

[LARTC] two interfaces - borrowing bandwidth...

[Michal Kustosik]

Hello...

I have one 2Mbit WAN interfaces and two vlan LAN interfaces - vlan2 and 
vlan3. I'd like to limit bandwidth something like this:
rate 1Mbit ceil 2Mbit for vlan2 and 
rate 1Mbit ceil 2Mbit for vlan3 
with possibility to borrow bandwidth between vlan2 and vlan3. 
                 ^^^^^^^^^^^^^^^^^^^

Is it possible to do in any way?

regards,

-- 
Michal

_______________________________________________
LARTC mailing list / LARTC@mailman.ds9a.nl
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/

Re: [LARTC] two interfaces - borrowing bandwidth...

[Stef Coene]

On Friday 30 January 2004 15:50, Michal Kustosik wrote:
> Hello...
>
> I have one 2Mbit WAN interfaces and two vlan LAN interfaces - vlan2 and
> vlan3. I'd like to limit bandwidth something like this:
> rate 1Mbit ceil 2Mbit for vlan2 and
> rate 1Mbit ceil 2Mbit for vlan3
> with possibility to borrow bandwidth between vlan2 and vlan3.
>                  ^^^^^^^^^^^^^^^^^^^
>
> Is it possible to do in any way?
Yes.  You can use the imq device.  But there are some stability problems with 
it.  Check the archives for this list for the last days for more information.

Stef

-- 
stef.coene@docum.org
 "Using Linux as bandwidth manager"
     http://www.docum.org/
     #lartc @ irc.openprojects.net

_______________________________________________
LARTC mailing list / LARTC@mailman.ds9a.nl
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/