Re: [patch] udevd - cleanup and better timeout handling

[Kay Sievers <kay.sievers@vrfy.org>]

[-- Attachment #1: Type: text/plain, Size: 4657 bytes --]

On Thu, Jan 29, 2004 at 04:55:11PM +0100, Kay Sievers wrote:
> On Thu, Jan 29, 2004 at 02:56:25AM +0100, Kay Sievers wrote:
> > On Wed, Jan 28, 2004 at 10:47:36PM +0100, Kay Sievers wrote:
> > > On Tue, Jan 27, 2004 at 11:13:09AM -0800, Greg KH wrote:
> > > > On Tue, Jan 27, 2004 at 08:08:09PM +0100, Kay Sievers wrote:
> > > > > On Tue, Jan 27, 2004 at 07:56:04AM +0100, Kay Sievers wrote:
> > > > > > On Mon, Jan 26, 2004 at 11:28:19AM -0800, Greg KH wrote:
> > > > > > > On Mon, Jan 26, 2004 at 08:11:10PM +0100, Kay Sievers wrote:
> > > > > > > > On Mon, Jan 26, 2004 at 10:22:34AM -0800, Greg KH wrote:
> > > > > > > > > On Sun, Jan 25, 2004 at 09:03:14PM +0100, Kay Sievers wrote:
> > > > > > > > > >   1. We are much too slow.
> > > > > > > > > >      We want to exec the  real udev in the background, but a 'remove'
> > > > > > > > > >      is much much faster than a 'add', so we have a problem.
> > > > > > > > > >      Question: is it neccessary to order events for different devpath's?
> > > > > > > > > >      If no, we may wait_pid() for the exec only if we have another udev
> > > > > > > > > >      working on the same devpath.
> > > > > > > > > 
> > > > > > > > > But how will we keep track of that?  It's probably easier just to wait
> > > > > > > > > for each one to finish, right?
> > > > > > > > 
> > > > > > > > We leave the message in the queue until we reach the SIGCHLD for this
> > > > > > > > pid. So we can search the queue if we are already working on this devpath,
> > > > > > > > and delay the new exec until the former exec comes back.
> > > > > > > 
> > > > > > > Ok, if that isn't too much trouble.
> > > > > > > 
> > > > > > > > Is it feasible to run in parallel for different paths, or can you think
> > > > > > > > of any problem?
> > > > > > > 
> > > > > > > I can't think of any problem with that.
> > > > > > 
> > > > > > Here is the next round. We have three queues now. All incoming messages
> > > > > > are queued in msg_list and if nothing is missing we move it to the
> > > > > > running_list and exec in the background.
> > > > > > If the exec comes back, it removes the message from the running_list and
> > > > > > frees the message.
> > > > > > 
> > > > > > Before we exec, we check the running_list if there is a udev running on
> > > > > > the same device path. If yes, we move the message to the delay_list. If
> > > > > > the former exec comes back, we move the message to the running_list and
> > > > > > exec it.
> > > > > 
> > > > > Oh, sorry forget about it now.
> > > > > I will come up with something better tested.
> > > > 
> > > > Oops, I just applied this version :)
> > > > 
> > > > I'll try testing this later on today.
> > > 
> > > Oh, couldn't resist to try threads.
> > > It's a multithreaded udevd that communicates through a localhost socket.
> > > The message includes a magic with the udev version, so we don't accept
> > > older udevsend's.
> > > 
> > > No need for locking, cause we can't bind two sockets on the same address.
> > > The daemon tries to connect and if it fails it starts the daemon.
> > > 
> > > We create a thread for every incoming connection, handle over the socket,
> > > sort the messages in the global message queue and exit the thread.
> > > Huh, that was easy with threads :)
> > > 
> > > With the addition of a message we wakeup the queue manager thread and
> > > handle timeouts or move the message to the global exec list. This wakes
> > > up the exec list manager who looks if a process is already running for this
> > > device path.
> > > If yes, the exec is delayed otherwise we create a thread that execs udev.
> > > n the background. With the return of udev we free the message and wakeup
> > > the exec list manager to look if something is pending.
> > > 
> > > It is just a quick shot, cause I couldn't solve the problems with fork an
> > > scheduling and I wanted to see if I'm to stupid  :)
> > > But if anybody with a better idea or more experience with I/O scheduling
> > > we may go another way. The remaining problem is that klibc doesn't support
> > > threads.
> > > 
> > > By now, we don't exec anything, it's just a sleep 3 for every exec,
> > > but you can see the queue management by watching syslog and do:
> > > 
> > >   DEVPATH=/abc ACTION=add SEQNUM=0 ./udevsend /abc
> 
> Next version, switched to unix domain sockets.

Next cleaned up version. Hey, nobody wants to try it :)

Works for me, It's funny if I connect/disconnect my 4in1-usb-flash-reader
every two seconds. The 2.6 usb rocks! I can connect/diconnect a hub with 3
devices plugged in every second and don't run into any problem but a _very_
big udevd queue.

thanks,
Kay


[-- Attachment #2: 01-udevd-threads.patch --]
[-- Type: text/plain, Size: 21199 bytes --]

===== Makefile 1.93 vs edited =====
--- 1.93/Makefile	Tue Jan 27 08:29:28 2004
+++ edited/Makefile	Thu Jan 29 16:46:29 2004
@@ -255,7 +255,7 @@
 	$(STRIPCMD) $@
 
 $(DAEMON): udevd.h udevd.o udevd.o logging.o
-	$(LD) $(LDFLAGS) -o $@ $(CRT0) udevd.o logging.o $(LIB_OBJS) $(ARCH_LIB_OBJS)
+	$(LD) $(LDFLAGS) -lpthread -o $@ $(CRT0) udevd.o logging.o $(LIB_OBJS) $(ARCH_LIB_OBJS)
 	$(STRIPCMD) $@
 
 $(SENDER): udevd.h udevsend.o udevd.o logging.o
===== udevd.c 1.7 vs edited =====
--- 1.7/udevd.c	Wed Jan 28 19:52:44 2004
+++ edited/udevd.c	Sat Jan 31 03:08:44 2004
@@ -1,9 +1,6 @@
 /*
- * udevd.c
+ * udevd.c - hotplug event serializer
  *
- * Userspace devfs
- *
- * Copyright (C) 2004 Ling, Xiaofeng <xiaofeng.ling@intel.com>
  * Copyright (C) 2004 Kay Sievers <kay.sievers@vrfy.org>
  *
  *
@@ -24,9 +21,7 @@
 
 #include <stddef.h>
 #include <sys/types.h>
-#include <sys/ipc.h>
 #include <sys/wait.h>
-#include <sys/msg.h>
 #include <signal.h>
 #include <unistd.h>
 #include <errno.h>
@@ -35,6 +30,10 @@
 #include <string.h>
 #include <time.h>
 #include <fcntl.h>
+#include <sys/types.h>
+#include <sys/socket.h>
+#include <sys/un.h>
+#include <pthread.h>
 
 #include "list.h"
 #include "udev.h"
@@ -43,141 +42,82 @@
 #include "logging.h"
 
 
-#define BUFFER_SIZE			1024
-
-static int running_remove_queue(pid_t pid);
-static int msg_exec(struct hotplug_msg *msg);
-
-static int expect_seqnum = 0;
-static int lock_file = -1;
-static char *lock_filename = ".udevd_lock";
+static pthread_mutex_t  msg_lock;
+static pthread_mutex_t  msg_active_lock;
+static pthread_cond_t msg_active;
+static pthread_mutex_t  exec_lock;
+static pthread_mutex_t  exec_active_lock;
+static pthread_cond_t exec_active;
+static pthread_mutex_t  running_lock;
+static pthread_attr_t thr_attr;
+static int expected_seqnum = 0;
 
 LIST_HEAD(msg_list);
+LIST_HEAD(exec_list);
 LIST_HEAD(running_list);
-LIST_HEAD(delayed_list);
-
-static void sig_handler(int signum)
-{
-	pid_t pid;
 
-	dbg("caught signal %d", signum);
-	switch (signum) {
-	case SIGALRM:
-		dbg("event timeout reached");
-		break;
-	case SIGCHLD:
-		/* catch signals from exiting childs */
-		while ( (pid = waitpid(-1, NULL, WNOHANG)) > 0) {
-			dbg("exec finished, pid %d", pid);
-			running_remove_queue(pid);
-		}
-		break;
-	case SIGINT:
-	case SIGTERM:
-		if (lock_file >= 0) {
-			close(lock_file);
-			unlink(lock_filename);
-		}
-		exit(20 + signum);
-		break;
-	default:
-		dbg("unhandled signal");
-	}
-}
 
-static void set_timeout(int seconds)
+static void msg_dump_queue(void)
 {
-	alarm(seconds);
-	dbg("set timeout in %d seconds", seconds);
-}
+	struct hotplug_msg *msg;
 
-static int running_moveto_queue(struct hotplug_msg *msg)
-{
-	dbg("move sequence %d [%d] to running queue '%s'",
-	    msg->seqnum, msg->pid, msg->devpath);
-	list_move_tail(&msg->list, &running_list);
-	return 0;
+	list_for_each_entry(msg, &msg_list, list)
+		dbg("sequence %d in queue", msg->seqnum);
 }
 
-static int running_remove_queue(pid_t  pid)
+static void msg_dump(struct hotplug_msg *msg)
 {
-	struct hotplug_msg *child;
-	struct hotplug_msg *tmp_child;
-
-	list_for_each_entry_safe(child, tmp_child, &running_list, list)
-		if (child->pid == pid) {
-			list_del_init(&child->list);
-			free(child);
-			return 0;
-		}
-	return -EINVAL;
+	dbg("sequence %d, '%s', '%s', '%s'",
+	    msg->seqnum, msg->action, msg->devpath, msg->subsystem);
 }
 
-static pid_t running_getpid_by_devpath(struct hotplug_msg *msg)
+/* allocates a new message */
+static struct hotplug_msg *msg_create(void)
 {
-	struct hotplug_msg *child;
-	struct hotplug_msg *tmp_child;
+	struct hotplug_msg *new_msg;
 
-	list_for_each_entry_safe(child, tmp_child, &running_list, list)
-		if (strncmp(child->devpath, msg->devpath, sizeof(child->devpath)) == 0)
-			return child->pid;
-	return 0;
+	new_msg = malloc(sizeof(struct hotplug_msg));
+	if (new_msg == NULL) {
+		dbg("error malloc");
+		return NULL;
+	}
+	memset(new_msg, 0x00, sizeof(struct hotplug_msg));
+	return new_msg;
 }
 
-static void delayed_dump_queue(void)
+/* orders the message in the queue by sequence number */
+static void msg_queue_insert(struct hotplug_msg *msg)
 {
-	struct hotplug_msg *child;
+	struct hotplug_msg *loop_msg;
 
-	list_for_each_entry(child, &delayed_list, list)
-		dbg("event for '%s' in queue", child->devpath);
-}
+	/* sort message by sequence number into list*/
+	list_for_each_entry(loop_msg, &msg_list, list)
+		if (loop_msg->seqnum > msg->seqnum)
+			break;
+	list_add_tail(&msg->list, &loop_msg->list);
+	dbg("queued message seq %d", msg->seqnum);
 
-static int delayed_moveto_queue(struct hotplug_msg *msg)
-{
-	dbg("move event to delayed queue '%s'", msg->devpath);
-	list_move_tail(&msg->list, &delayed_list);
-	return 0;
-}
+	/* store timestamp of queuing */
+	msg->queue_time = time(NULL);
 
-static void delayed_check_queue(void)
-{
-	struct hotplug_msg *delayed_child;
-	struct hotplug_msg *running_child;
-	struct hotplug_msg *tmp_child;
-
-	/* see if we have delayed exec's that can run now */
-	list_for_each_entry_safe(delayed_child, tmp_child, &delayed_list, list)
-		list_for_each_entry_safe(running_child, tmp_child, &running_list, list)
-			if (strncmp(delayed_child->devpath, running_child->devpath,
-			    sizeof(running_child->devpath)) == 0) {
-				dbg("delayed exec for '%s' can run now", delayed_child->devpath);
-				msg_exec(delayed_child);
-			}
-}
+	/* signal queue activity to manager */
+	pthread_mutex_lock(&msg_active_lock);
+	pthread_cond_signal(&msg_active);
+	pthread_mutex_unlock(&msg_active_lock);
 
-static void msg_dump(struct hotplug_msg *msg)
-{
-	dbg("sequence %d, '%s', '%s', '%s'",
-	    msg->seqnum, msg->action, msg->devpath, msg->subsystem);
+	return ;
 }
 
-static int msg_exec(struct hotplug_msg *msg)
+/* forks event and removes event from run queue when finished */
+static void *run_threads(void * parm)
 {
 	pid_t pid;
+	struct hotplug_msg *msg;
 
-	msg_dump(msg);
-
+	msg = parm;
 	setenv("ACTION", msg->action, 1);
 	setenv("DEVPATH", msg->devpath, 1);
 
-	/* delay exec, if we already have a udev working on the same devpath */
-	pid = running_getpid_by_devpath(msg);
-	if (pid != 0) {
-		dbg("delay exec of sequence %d, [%d] already working on '%s'",
-		    msg->seqnum, pid, msg->devpath);
-		delayed_moveto_queue(msg);
-	}
-
 	pid = fork();
 	switch (pid) {
 	case 0:
@@ -188,135 +128,206 @@
 		break;
 	case -1:
 		dbg("fork of child failed");
-		return -1;
+		goto exit;
 	default:
-		/* exec in background, get the SIGCHLD with the sig handler */
-		msg->pid = pid;
-		running_moveto_queue(msg);
-		break;
+		/* wait for exit of child */
+		dbg("==> exec seq %d [%d] working at '%s'",
+		    msg->seqnum, pid, msg->devpath);
+		wait(NULL);
+		dbg("<== exec seq %d came back", msg->seqnum);
 	}
-	return 0;
+
+exit:
+	/* remove event from run list */
+	pthread_mutex_lock(&running_lock);
+	list_del_init(&msg->list);
+	pthread_mutex_unlock(&running_lock);
+
+	free(msg);
+
+	/* signal queue activity to exec manager */
+	pthread_mutex_lock(&exec_active_lock);
+	pthread_cond_signal(&exec_active);
+	pthread_mutex_unlock(&exec_active_lock);
+
+	pthread_exit(0);
 }
 
-static void msg_dump_queue(void)
+/* returns already running task with devpath */
+static struct hotplug_msg *running_with_devpath(struct hotplug_msg *msg)
 {
-	struct hotplug_msg *msg;
+	struct hotplug_msg *loop_msg;
+	struct hotplug_msg *tmp_msg;
 
-	list_for_each_entry(msg, &msg_list, list)
-		dbg("sequence %d in queue", msg->seqnum);
+	list_for_each_entry_safe(loop_msg, tmp_msg, &running_list, list)
+		if (strncmp(loop_msg->devpath, msg->devpath, sizeof(loop_msg->devpath)) == 0)
+			return loop_msg;
+	return NULL;
 }
 
-static void msg_check_queue(void)
+/* queue management executes the events and delays events for the same devpath */
+static void *exec_queue_manager(void * parm)
 {
+	struct hotplug_msg *loop_msg;
+	struct hotplug_msg *tmp_msg;
 	struct hotplug_msg *msg;
+	pthread_t run_tid;
+
+	while (1) {
+		pthread_mutex_lock(&exec_lock);
+		list_for_each_entry_safe(loop_msg, tmp_msg, &exec_list, list) {
+			msg = running_with_devpath(loop_msg);
+			if (msg == NULL) {
+				/* move event to run list */
+				pthread_mutex_lock(&running_lock);
+				list_move_tail(&loop_msg->list, &running_list);
+				pthread_mutex_unlock(&running_lock);
+
+				pthread_create(&run_tid, &thr_attr, run_threads, (void *) loop_msg);
+
+				dbg("moved seq %d to running list", loop_msg->seqnum);
+			} else {
+				dbg("delay seq %d, cause seq %d already working on '%s'",
+				    loop_msg->seqnum, msg->seqnum, msg->devpath);
+			}
+		}
+		pthread_mutex_unlock(&exec_lock);
+
+		/* wait for activation, new events or childs coming back */
+		pthread_mutex_lock(&exec_active_lock);
+		pthread_cond_wait(&exec_active, &exec_active_lock);
+		pthread_mutex_unlock(&exec_active_lock);
+	}
+}
+
+/* move message from incoming to exec queue */
+static void msg_move_exec(struct list_head *head)
+{
+	list_move_tail(head, &exec_list);
+	/* signal queue activity to manager */
+	pthread_mutex_lock(&exec_active_lock);
+	pthread_cond_signal(&exec_active);
+	pthread_mutex_unlock(&exec_active_lock);
+}
+
+/* queue management thread handles the timeouts and dispatches the events */
+static void *msg_queue_manager(void * parm)
+{
+	struct hotplug_msg *loop_msg;
 	struct hotplug_msg *tmp_msg;
-	time_t msg_age;
+	time_t msg_age = 0;
+	struct timespec tv;
 
+	while (1) {
+		dbg("msg queue manager, next expected is %d", expected_seqnum);
+		pthread_mutex_lock(&msg_lock);
+		pthread_mutex_lock(&exec_lock);
 recheck:
-	/* dispatch events until one is missing */
-	list_for_each_entry_safe(msg, tmp_msg, &msg_list, list) {
-		if (msg->seqnum != expect_seqnum)
-			break;
-		msg_exec(msg);
-		expect_seqnum++;
-	}
+		list_for_each_entry_safe(loop_msg, tmp_msg, &msg_list, list) {
+			/* move event with expected sequence to the exec list */
+			if (loop_msg->seqnum == expected_seqnum) {
+				msg_move_exec(&loop_msg->list);
+				expected_seqnum++;
+				dbg("moved seq %d to exec, next expected is %d",
+				    loop_msg->seqnum, expected_seqnum);
+				continue;
+			}
 
-	/* recalculate next timeout */
-	if (list_empty(&msg_list) == 0) {
-		msg_age = time(NULL) - msg->queue_time;
-		if (msg_age > EVENT_TIMEOUT_SEC-1) {
-			info("event %d, age %li seconds, skip event %d-%d",
-			     msg->seqnum, msg_age, expect_seqnum, msg->seqnum-1);
-			expect_seqnum = msg->seqnum;
-			goto recheck;
+			/* move event with expired timeout to the exec list */
+			msg_age = time(NULL) - loop_msg->queue_time;
+			if (msg_age > EVENT_TIMEOUT_SEC-1) {
+				msg_move_exec(&loop_msg->list);
+				expected_seqnum = loop_msg->seqnum+1;
+				dbg("moved seq %d to exec, reset next expected to %d",
+				    loop_msg->seqnum, expected_seqnum);
+				goto recheck;
+			} else {
+				break;
+			}
 		}
 
-		/* the first sequence gets its own timeout */
-		if (expect_seqnum == 0) {
-			msg_age = EVENT_TIMEOUT_SEC - FIRST_EVENT_TIMEOUT_SEC;
-			expect_seqnum = 1;
+		msg_dump_queue();
+		pthread_mutex_unlock(&exec_lock);
+		pthread_mutex_unlock(&msg_lock);
+
+		/* wait until queue gets active or next message timeout expires */
+		pthread_mutex_lock(&msg_active_lock);
+
+		if (list_empty(&msg_list) == 0) {
+			tv.tv_sec = time(NULL) + EVENT_TIMEOUT_SEC - msg_age;
+			tv.tv_nsec = 0;
+			dbg("next event expires in %li seconds",
+			    EVENT_TIMEOUT_SEC - msg_age);
+			pthread_cond_timedwait(&msg_active, &msg_active_lock, &tv);
+		} else {
+			pthread_cond_wait(&msg_active, &msg_active_lock);
 		}
-
-		set_timeout(EVENT_TIMEOUT_SEC - msg_age);
-		return;
+		pthread_mutex_unlock(&msg_active_lock);
 	}
 }
 
-static int msg_add_queue(struct hotplug_msg *msg)
+/* every connect creates a thread which gets the msg, queues it and exits */
+static void *client_threads(void * parm)
 {
-	struct hotplug_msg *new_msg;
-	struct hotplug_msg *tmp_msg;
+	int sock;
+	struct hotplug_msg *msg;
+	int retval;
 
-	new_msg = malloc(sizeof(*new_msg));
-	if (new_msg == NULL) {
-		dbg("error malloc");
-		return -ENOMEM;
+	sock = (int) parm;
+
+	msg = msg_create();
+	if (msg == NULL) {
+		dbg("unable to store message");
+		goto exit;
 	}
-	memcpy(new_msg, msg, sizeof(*new_msg));
 
-	/* store timestamp of queuing */
-	new_msg->queue_time = time(NULL);
+	retval = recv(sock, msg, sizeof(struct hotplug_msg), 0);
+	if (retval <  0) {
+		dbg("unable to receive message");
+		goto exit;
+	}
 
-	/* sort message by sequence number into list*/
-	list_for_each_entry(tmp_msg, &msg_list, list)
-		if (tmp_msg->seqnum > new_msg->seqnum)
-			break;
-	list_add_tail(&new_msg->list, &tmp_msg->list);
+	if (strncmp(msg->magic, UDEV_MAGIC, sizeof(UDEV_MAGIC)) != 0 ) {
+		dbg("message magic '%s' doesn't match, ignore it", msg->magic);
+		goto exit;
+	}
 
-	return 0;
+	pthread_mutex_lock(&msg_lock);
+	msg_queue_insert(msg);
+	pthread_mutex_unlock(&msg_lock);
+
+exit:
+	close(sock);
+	pthread_exit(0);
 }
 
-static void work(void)
+static void sig_handler(int signum)
 {
-	struct hotplug_msg *msg;
-	int msgid;
-	key_t key;
-	char buf[BUFFER_SIZE];
-	int ret;
-
-	key = ftok(UDEVD_BIN, IPC_KEY_ID);
-	msg = (struct hotplug_msg *) buf;
-	msgid = msgget(key, IPC_CREAT);
-	if (msgid == -1) {
-		dbg("open message queue error");
-		exit(1);
-	}
-	while (1) {
-		ret = msgrcv(msgid, (struct msgbuf *) buf, BUFFER_SIZE-4, HOTPLUGMSGTYPE, 0);
-		if (ret != -1) {
-			dbg("received sequence %d, expected sequence %d", msg->seqnum, expect_seqnum);
-			if (msg->seqnum >= expect_seqnum) {
-				msg_add_queue(msg);
-				msg_dump_queue();
-				msg_check_queue();
-				continue;
-			}
-			dbg("too late for event with sequence %d, event skipped ", msg->seqnum);
-		} else {
-			if (errno == EINTR) {
-				msg_check_queue();
-				msg_dump_queue();
-				delayed_check_queue();
-				delayed_dump_queue();
-				continue;
-			}
-			dbg("ipc message receive error '%s'", strerror(errno));
-		}
+	switch (signum) {
+		case SIGINT:
+		case SIGTERM:
+			unlink(UDEVD_LOCK);
+			unlink(UDEVD_SOCKET);
+			exit(20 + signum);
+			break;
+		default:
+			dbg("unhandled signal");
 	}
 }
 
 static int one_and_only(void)
 {
-	char string[100];
-
-	lock_file = open(lock_filename, O_RDWR | O_CREAT, 0x640);
+	char string[50];
+	int lock_file;
 
 	/* see if we can open */
+	lock_file = open(UDEVD_LOCK, O_RDWR | O_CREAT, 0x640);
 	if (lock_file < 0)
 		return -1;
-	
+
 	/* see if we can lock */
 	if (lockf(lock_file, F_TLOCK, 0) < 0) {
+		dbg("file is already locked, exit");
 		close(lock_file);
 		return -1;
 	}
@@ -329,16 +340,73 @@
 
 int main(int argc, char *argv[])
 {
+	int ssock;
+	int csock;
+	struct sockaddr_un saddr;
+	struct sockaddr_un caddr;
+	socklen_t clen;
+	pthread_t cli_tid;
+	pthread_t mgr_msg_tid;
+	pthread_t mgr_exec_tid;
+	int retval;
+
 	/* only let one version of the daemon run at any one time */
 	if (one_and_only() != 0)
 		exit(0);
 
-	/* set up signal handler */
 	signal(SIGINT, sig_handler);
 	signal(SIGTERM, sig_handler);
-	signal(SIGALRM, sig_handler);
-	signal(SIGCHLD, sig_handler);
 
-	work();
-	exit(0);
+	memset(&saddr, 0x00, sizeof(saddr));
+	saddr.sun_family = AF_LOCAL;
+	strcpy(saddr.sun_path, UDEVD_SOCKET);
+
+	unlink(UDEVD_SOCKET);
+	ssock = socket(AF_LOCAL, SOCK_STREAM, 0);
+	if (ssock == -1) {
+		dbg("error getting socket");
+		exit(1);
+	}
+
+	retval = bind(ssock, &saddr, sizeof(saddr));
+	if (retval < 0) {
+		dbg("bind failed\n");
+		goto exit;
+	}
+
+	retval = listen(ssock, SOMAXCONN);
+	if (retval < 0) {
+		dbg("listen failed\n");
+		goto exit;
+	}
+
+	pthread_mutex_init(&msg_lock, NULL);
+	pthread_mutex_init(&msg_active_lock, NULL);
+	pthread_mutex_init(&exec_lock, NULL);
+	pthread_mutex_init(&exec_active_lock, NULL);
+	pthread_mutex_init(&running_lock, NULL);
+
+	/* set default attributes for created threads */
+	pthread_attr_init(&thr_attr);
+	pthread_attr_setdetachstate(&thr_attr, PTHREAD_CREATE_DETACHED);
+
+	/* init queue management */
+	pthread_create(&mgr_msg_tid, &thr_attr, msg_queue_manager, NULL);
+	pthread_create(&mgr_exec_tid, &thr_attr, exec_queue_manager, NULL);
+
+	clen = sizeof(caddr);
+	/* main loop */
+	while (1) {
+		csock = accept(ssock, &caddr, &clen);
+		if (csock < 0) {
+			if (errno == EINTR)
+				continue;
+			dbg("client accept failed\n");
+		}
+		pthread_create(&cli_tid, &thr_attr, client_threads, (void *) csock);
+	}
+exit:
+	close(ssock);
+	unlink(UDEVD_SOCKET);
+	exit(1);
 }
===== udevd.h 1.4 vs edited =====
--- 1.4/udevd.h	Tue Jan 27 08:29:28 2004
+++ edited/udevd.h	Sat Jan 31 03:12:52 2004
@@ -4,6 +4,7 @@
  * Userspace devfs
  *
  * Copyright (C) 2004 Ling, Xiaofeng <xiaofeng.ling@intel.com>
+ * Copyright (C) 2004 Kay Sievers <kay.sievers@vrfy.org>
  *
  *
  *	This program is free software; you can redistribute it and/or modify it
@@ -23,16 +24,21 @@
 
 #include "list.h"
 
-#define FIRST_EVENT_TIMEOUT_SEC		1
-#define EVENT_TIMEOUT_SEC		5
-#define UDEVSEND_RETRY_COUNT		50 /* x 10 millisec */
-
-#define IPC_KEY_ID			1
-#define HOTPLUGMSGTYPE			44
+/*
+ * FIXME: udev_root is post compile configurable and may also be
+ * mounted over at any time and /var/run/ and /tmp/ is unusable,
+ * cause it's cleaned at system startup, long _after_ udevd is
+ * already running. Should we use udev_init_config()?
+ */
 
+#define UDEV_MAGIC			"udev_" UDEV_VERSION
+#define EVENT_TIMEOUT_SEC		5
+#define UDEVSEND_CONNECT_RETRY		20 /* x 100 millisec */
+#define UDEVD_SOCKET			UDEV_ROOT ".udevd.socket"
+#define UDEVD_LOCK			UDEV_ROOT ".udevd.pid"
 
 struct hotplug_msg {
-	long mtype;
+	char magic[20];
 	struct list_head list;
 	pid_t pid;
 	int seqnum;
===== udevsend.c 1.8 vs edited =====
--- 1.8/udevsend.c	Tue Jan 27 08:29:28 2004
+++ edited/udevsend.c	Sat Jan 31 02:53:31 2004
@@ -32,12 +32,15 @@
 #include <unistd.h>
 #include <time.h>
 #include <wait.h>
+#include <sys/socket.h>
+#include <sys/un.h>
 
 #include "udev.h"
 #include "udev_version.h"
 #include "udevd.h"
 #include "logging.h"
 
+
 static inline char *get_action(void)
 {
 	char *action;
@@ -66,7 +69,7 @@
 			    char *devpath, char *subsystem, int seqnum)
 {
 	memset(msg, 0x00, sizeof(*msg));
-	msg->mtype = HOTPLUGMSGTYPE;
+	strfieldcpy(msg->magic, UDEV_MAGIC);
 	msg->seqnum = seqnum;
 	strncpy(msg->action, action, 8);
 	strncpy(msg->devpath, devpath, 128);
@@ -108,12 +111,8 @@
 	return 0;
 }
 
-
 int main(int argc, char* argv[])
 {
-	int msgid;
-	key_t key;
-	struct msqid_ds msg_queue;
 	struct hotplug_msg message;
 	char *action;
 	char *devpath;
@@ -124,6 +123,8 @@
 	int size;
 	int loop;
 	struct timespec tspec;
+	int sock;
+	struct sockaddr_un saddr;
 
 	subsystem = argv[1];
 	if (subsystem == NULL) {
@@ -150,41 +151,58 @@
 	}
 	seq = atoi(seqnum);
 
-	/* create ipc message queue or get id of our existing one */
-	key = ftok(UDEVD_BIN, IPC_KEY_ID);
-	dbg("using ipc queue 0x%0x", key);
-	size =  build_hotplugmsg(&message, action, devpath, subsystem, seq);
-	msgid = msgget(key, IPC_CREAT);
-	if (msgid == -1) {
-		dbg("error open ipc queue");
+	sock = socket(AF_LOCAL, SOCK_STREAM, 0);
+	if (sock == -1) {
+		dbg("error getting socket");
 		goto exit;
 	}
 
-	/* send ipc message to the daemon */
-	retval = msgsnd(msgid, &message, size, 0);
-	if (retval == -1) {
-		dbg("error sending ipc message");
-		goto exit;
+	memset(&saddr, 0x00, sizeof(saddr));
+	saddr.sun_family = AF_LOCAL;
+	strcpy(saddr.sun_path, UDEVD_SOCKET);
+
+	/* try to connect, if it fails start daemon */
+	retval = connect(sock, &saddr, sizeof(saddr));
+	if (retval != -1) {
+		goto send;
+	} else {
+		dbg("connect failed, try starting daemon...");
+		retval = start_daemon();
+		if (retval == 0) {
+			dbg("daemon started");
+		} else {
+			dbg("error starting daemon");
+			goto exit;
+		}
 	}
 
-	/* get state of ipc queue */
+	/* try to connect while daemon to starts */
 	tspec.tv_sec = 0;
-	tspec.tv_nsec = 10000000;  /* 10 millisec */
-	loop = UDEVSEND_RETRY_COUNT;
+	tspec.tv_nsec = 100000000;  /* 100 millisec */
+	loop = UDEVSEND_CONNECT_RETRY;
 	while (loop--) {
-		retval = msgctl(msgid, IPC_STAT, &msg_queue);
-		if (retval == -1) {
-			dbg("error getting info on ipc queue");
-			goto exit;
-		}
-		if (msg_queue.msg_qnum == 0)
-			goto exit;
+		retval = connect(sock, &saddr, sizeof(saddr));
+		if (retval != -1)
+			goto send;
+		else
+			dbg("retry to connect %d",
+			    UDEVSEND_CONNECT_RETRY - loop);
 		nanosleep(&tspec, NULL);
 	}
+	dbg("error connecting to daemon, start daemon failed");
+	goto exit;
 
-	info("message is still in the ipc queue, starting daemon...");
-	retval = start_daemon();
+send:
+	size = build_hotplugmsg(&message, action, devpath, subsystem, seq);
+	retval = send(sock, &message, size, 0);
+	if (retval == -1) {
+		dbg("error sending message");
+		close (sock);
+		goto exit;
+	}
+	close (sock);
+	return 0;
 
 exit:
-	return retval;
+	return 1;
 }
===== test/udevd_test.sh 1.4 vs edited =====
--- 1.4/test/udevd_test.sh	Tue Jan 27 08:29:28 2004
+++ edited/test/udevd_test.sh	Sat Jan 31 03:30:06 2004
@@ -1,9 +1,7 @@
-#!/bin/bash
+#!/bin/sh
 
-# kill daemon, first event will start it again
-killall udevd
-
-# 3 x connect/disconnect sequence of sda/sdb/sdc
+# add/rem/add/rem/add sequence of sda/sdb/sdc
+# a few days longer and the socket of my usb-flash-reader is gone :)
 
 export SEQNUM=3
 export ACTION=add