* Raid5 resyncs after every reboot
@ 2004-02-04 2:19 Nathan Hunsperger
0 siblings, 0 replies; 2+ messages in thread
From: Nathan Hunsperger @ 2004-02-04 2:19 UTC (permalink / raw)
To: linux-raid
Hi -
For some reason, my raid5 array resyncs after every reboot. I don't
recall this happening originally, although I have had to hot-add disks
after failures and upgrade mdadm between then and now.
Below I have attached some logs of bootup.
All of the event counters are identical, so I wouldn't expect to see a
resync. Does the kernel not stop raid arrays that it did not start? I
ask because the disks in question are attached to a controller which is
started when its driver is loaded via a module. When the module is
loaded, I have already seen md autodetect in the logs, and I have a
mdadm-raid script in my bootscripts which kicks in. However, I don't
have any kill scripts on shutdown. Lastly, after unmounting all file
systems, I see something blink on console about md0 (I believe to the
affect that it is in use) right before the actual reset.
If someone could provide insight into the resyncs (even though the
event counters are the same), or validate what I think may be happening
(meaning that md keeps a dirty bit around in addition to the event
counter), I'd appreciate that.
regards,
Nathan
Feb 3 15:59:51 screwdriver kernel: md: md driver 0.90.0 MAX_MD_DEVS=256, MD_SB_DISKS=27
Feb 3 15:59:51 screwdriver kernel: md: Autodetecting RAID arrays.
Feb 3 15:59:51 screwdriver kernel: md: autorun ...
Feb 3 15:59:51 screwdriver kernel: md: ... autorun DONE.
--snip--
<< module for controller loaded >>
--snip--
Feb 3 15:59:51 screwdriver kernel: [events: 00000018]
Feb 3 15:59:51 screwdriver kernel: md: bind<scsi/host4/bus0/target1/lun0/part1,1>
Feb 3 15:59:51 screwdriver kernel: [events: 00000018]
Feb 3 15:59:51 screwdriver kernel: md: bind<scsi/host4/bus0/target2/lun0/part1,2>
Feb 3 15:59:51 screwdriver kernel: [events: 00000018]
Feb 3 15:59:51 screwdriver kernel: md: bind<scsi/host4/bus0/target3/lun0/part1,3>
Feb 3 15:59:51 screwdriver kernel: [events: 00000018]
Feb 3 15:59:51 screwdriver kernel: md: bind<scsi/host4/bus0/target4/lun0/part1,4>
Feb 3 15:59:51 screwdriver kernel: [events: 00000018]
Feb 3 15:59:51 screwdriver kernel: md: bind<scsi/host4/bus0/target5/lun0/part1,5>
Feb 3 15:59:51 screwdriver kernel: [events: 00000018]
Feb 3 15:59:51 screwdriver kernel: md: bind<scsi/host4/bus0/target6/lun0/part1,6>
Feb 3 15:59:51 screwdriver kernel: [events: 00000018]
Feb 3 15:59:51 screwdriver kernel: md: bind<scsi/host4/bus0/target7/lun0/part1,7>
Feb 3 15:59:51 screwdriver kernel: [events: 00000018]
Feb 3 15:59:51 screwdriver kernel: md: bind<scsi/host4/bus0/target8/lun0/part1,8>
Feb 3 15:59:51 screwdriver kernel: [events: 00000018]
Feb 3 15:59:51 screwdriver kernel: md: bind<scsi/host4/bus0/target9/lun0/part1,9>
Feb 3 15:59:51 screwdriver kernel: [events: 00000018]
Feb 3 15:59:51 screwdriver kernel: md: bind<scsi/host4/bus0/target10/lun0/part1,10>
Feb 3 15:59:51 screwdriver kernel: [events: 00000018]
Feb 3 15:59:51 screwdriver kernel: md: bind<scsi/host4/bus0/target11/lun0/part1,11>
Feb 3 15:59:51 screwdriver kernel: [events: 00000018]
Feb 3 15:59:51 screwdriver kernel: md: bind<scsi/host4/bus0/target12/lun0/part1,12>
Feb 3 15:59:51 screwdriver kernel: [events: 00000018]
Feb 3 15:59:51 screwdriver kernel: md: bind<scsi/host4/bus0/target13/lun0/part1,13>
Feb 3 15:59:51 screwdriver kernel: [events: 00000018]
Feb 3 15:59:51 screwdriver kernel: md: bind<scsi/host4/bus0/target0/lun0/part1,14>
Feb 3 15:59:51 screwdriver kernel: md: scsi/host4/bus0/target0/lun0/part1's event counter: 00000018
Feb 3 15:59:51 screwdriver kernel: md: scsi/host4/bus0/target13/lun0/part1's event counter: 00000018
Feb 3 15:59:51 screwdriver kernel: md: scsi/host4/bus0/target12/lun0/part1's event counter: 00000018
Feb 3 15:59:51 screwdriver kernel: md: scsi/host4/bus0/target11/lun0/part1's event counter: 00000018
Feb 3 15:59:51 screwdriver kernel: md: scsi/host4/bus0/target10/lun0/part1's event counter: 00000018
Feb 3 15:59:51 screwdriver kernel: md: scsi/host4/bus0/target9/lun0/part1's event counter: 00000018
Feb 3 15:59:51 screwdriver kernel: md: scsi/host4/bus0/target8/lun0/part1's event counter: 00000018
Feb 3 15:59:51 screwdriver kernel: md: scsi/host4/bus0/target7/lun0/part1's event counter: 00000018
Feb 3 15:59:51 screwdriver kernel: md: scsi/host4/bus0/target6/lun0/part1's event counter: 00000018
Feb 3 15:59:51 screwdriver kernel: md: scsi/host4/bus0/target5/lun0/part1's event counter: 00000018
Feb 3 15:59:51 screwdriver kernel: md: scsi/host4/bus0/target4/lun0/part1's event counter: 00000018
Feb 3 15:59:51 screwdriver kernel: md: scsi/host4/bus0/target3/lun0/part1's event counter: 00000018
Feb 3 15:59:51 screwdriver kernel: md: scsi/host4/bus0/target2/lun0/part1's event counter: 00000018
Feb 3 15:59:51 screwdriver kernel: md: scsi/host4/bus0/target1/lun0/part1's event counter: 00000018
Feb 3 15:59:51 screwdriver kernel: md0: max total readahead window set to 3328k
Feb 3 15:59:51 screwdriver kernel: md0: 13 data-disks, max readahead per data-disk: 256k
Feb 3 15:59:51 screwdriver kernel: raid5: device scsi/host4/bus0/target0/lun0/part1 operational as raid disk 0
Feb 3 15:59:51 screwdriver kernel: raid5: device scsi/host4/bus0/target13/lun0/part1 operational as raid disk 13
Feb 3 15:59:51 screwdriver kernel: raid5: device scsi/host4/bus0/target12/lun0/part1 operational as raid disk 12
Feb 3 15:59:51 screwdriver kernel: raid5: device scsi/host4/bus0/target11/lun0/part1 operational as raid disk 11
Feb 3 15:59:51 screwdriver kernel: raid5: device scsi/host4/bus0/target10/lun0/part1 operational as raid disk 10
Feb 3 15:59:51 screwdriver kernel: raid5: device scsi/host4/bus0/target9/lun0/part1 operational as raid disk 9
Feb 3 15:59:51 screwdriver kernel: raid5: device scsi/host4/bus0/target8/lun0/part1 operational as raid disk 8
Feb 3 15:59:51 screwdriver kernel: raid5: device scsi/host4/bus0/target7/lun0/part1 operational as raid disk 7
Feb 3 15:59:51 screwdriver kernel: raid5: device scsi/host4/bus0/target6/lun0/part1 operational as raid disk 6
Feb 3 15:59:51 screwdriver kernel: raid5: device scsi/host4/bus0/target5/lun0/part1 operational as raid disk 5
Feb 3 15:59:51 screwdriver kernel: raid5: device scsi/host4/bus0/target4/lun0/part1 operational as raid disk 4
Feb 3 15:59:51 screwdriver kernel: raid5: device scsi/host4/bus0/target3/lun0/part1 operational as raid disk 3
Feb 3 15:59:51 screwdriver kernel: raid5: device scsi/host4/bus0/target2/lun0/part1 operational as raid disk 2
Feb 3 15:59:51 screwdriver kernel: raid5: device scsi/host4/bus0/target1/lun0/part1 operational as raid disk 1
Feb 3 15:59:51 screwdriver kernel: raid5: allocated 14819kB for md0
Feb 3 15:59:51 screwdriver kernel: raid5: raid level 5 set md0 active with 14 out of 14 devices, algorithm 2
Feb 3 15:59:51 screwdriver kernel: raid5: raid set md0 not clean; reconstructing parity
Feb 3 15:59:51 screwdriver kernel: RAID5 conf printout:
Feb 3 15:59:51 screwdriver kernel: --- rd:14 wd:14 fd:0
Feb 3 15:59:51 screwdriver kernel: disk 0, s:0, o:1, n:0 rd:0 us:1 dev:scsi/host4/bus0/target0/lun0/part1
Feb 3 15:59:51 screwdriver kernel: disk 1, s:0, o:1, n:1 rd:1 us:1 dev:scsi/host4/bus0/target1/lun0/part1
Feb 3 15:59:51 screwdriver kernel: disk 2, s:0, o:1, n:2 rd:2 us:1 dev:scsi/host4/bus0/target2/lun0/part1
Feb 3 15:59:51 screwdriver kernel: disk 3, s:0, o:1, n:3 rd:3 us:1 dev:scsi/host4/bus0/target3/lun0/part1
Feb 3 15:59:51 screwdriver kernel: disk 4, s:0, o:1, n:4 rd:4 us:1 dev:scsi/host4/bus0/target4/lun0/part1
Feb 3 15:59:51 screwdriver kernel: disk 5, s:0, o:1, n:5 rd:5 us:1 dev:scsi/host4/bus0/target5/lun0/part1
Feb 3 15:59:51 screwdriver kernel: disk 6, s:0, o:1, n:6 rd:6 us:1 dev:scsi/host4/bus0/target6/lun0/part1
Feb 3 15:59:51 screwdriver kernel: disk 7, s:0, o:1, n:7 rd:7 us:1 dev:scsi/host4/bus0/target7/lun0/part1
Feb 3 15:59:51 screwdriver kernel: disk 8, s:0, o:1, n:8 rd:8 us:1 dev:scsi/host4/bus0/target8/lun0/part1
Feb 3 15:59:51 screwdriver kernel: disk 9, s:0, o:1, n:9 rd:9 us:1 dev:scsi/host4/bus0/target9/lun0/part1
Feb 3 15:59:51 screwdriver kernel: disk 10, s:0, o:1, n:10 rd:10 us:1 dev:scsi/host4/bus0/target10/lun0/part1
Feb 3 15:59:51 screwdriver kernel: disk 11, s:0, o:1, n:11 rd:11 us:1 dev:scsi/host4/bus0/target11/lun0/part1
Feb 3 15:59:51 screwdriver kernel: disk 12, s:0, o:1, n:12 rd:12 us:1 dev:scsi/host4/bus0/target12/lun0/part1
Feb 3 15:59:51 screwdriver kernel: disk 13, s:0, o:1, n:13 rd:13 us:1 dev:scsi/host4/bus0/target13/lun0/part1
Feb 3 15:59:51 screwdriver kernel: RAID5 conf printout:
Feb 3 15:59:51 screwdriver kernel: --- rd:14 wd:14 fd:0
Feb 3 15:59:51 screwdriver kernel: disk 0, s:0, o:1, n:0 rd:0 us:1 dev:scsi/host4/bus0/target0/lun0/part1
Feb 3 15:59:51 screwdriver kernel: disk 1, s:0, o:1, n:1 rd:1 us:1 dev:scsi/host4/bus0/target1/lun0/part1
Feb 3 15:59:51 screwdriver kernel: disk 2, s:0, o:1, n:2 rd:2 us:1 dev:scsi/host4/bus0/target2/lun0/part1
Feb 3 15:59:51 screwdriver kernel: disk 3, s:0, o:1, n:3 rd:3 us:1 dev:scsi/host4/bus0/target3/lun0/part1
Feb 3 15:59:51 screwdriver kernel: disk 4, s:0, o:1, n:4 rd:4 us:1 dev:scsi/host4/bus0/target4/lun0/part1
Feb 3 15:59:51 screwdriver kernel: disk 5, s:0, o:1, n:5 rd:5 us:1 dev:scsi/host4/bus0/target5/lun0/part1
Feb 3 15:59:51 screwdriver kernel: disk 6, s:0, o:1, n:6 rd:6 us:1 dev:scsi/host4/bus0/target6/lun0/part1
Feb 3 15:59:51 screwdriver kernel: disk 7, s:0, o:1, n:7 rd:7 us:1 dev:scsi/host4/bus0/target7/lun0/part1
Feb 3 15:59:51 screwdriver kernel: disk 8, s:0, o:1, n:8 rd:8 us:1 dev:scsi/host4/bus0/target8/lun0/part1
Feb 3 15:59:51 screwdriver kernel: disk 9, s:0, o:1, n:9 rd:9 us:1 dev:scsi/host4/bus0/target9/lun0/part1
Feb 3 15:59:51 screwdriver kernel: disk 10, s:0, o:1, n:10 rd:10 us:1 dev:scsi/host4/bus0/target10/lun0/part1
Feb 3 15:59:51 screwdriver kernel: disk 11, s:0, o:1, n:11 rd:11 us:1 dev:scsi/host4/bus0/target11/lun0/part1
Feb 3 15:59:51 screwdriver kernel: disk 12, s:0, o:1, n:12 rd:12 us:1 dev:scsi/host4/bus0/target12/lun0/part1
Feb 3 15:59:51 screwdriver kernel: disk 13, s:0, o:1, n:13 rd:13 us:1 dev:scsi/host4/bus0/target13/lun0/part1
Feb 3 15:59:51 screwdriver kernel: md: updating md0 RAID superblock on device
Feb 3 15:59:51 screwdriver kernel: md: scsi/host4/bus0/target0/lun0/part1 [events: 00000019]<6>(write) scsi/host4/bus0/target0/lun0/part1's sb offset: 35005504
Feb 3 15:59:51 screwdriver kernel: md: syncing RAID array md0
Feb 3 15:59:51 screwdriver kernel: md: minimum _guaranteed_ reconstruction speed: 100 KB/sec/disc.
Feb 3 15:59:51 screwdriver kernel: md: using maximum available idle IO bandwith (but not more than 100000 KB/sec) for reconstruction.
Feb 3 15:59:51 screwdriver kernel: md: using 124k window, over a total of 35005504 blocks.
Feb 3 15:59:51 screwdriver kernel: md: scsi/host4/bus0/target13/lun0/part1 [events: 00000019]<6>(write) scsi/host4/bus0/target13/lun0/part1's sb offset: 35005504
Feb 3 15:59:51 screwdriver kernel: md: scsi/host4/bus0/target12/lun0/part1 [events: 00000019]<6>(write) scsi/host4/bus0/target12/lun0/part1's sb offset: 35005504
Feb 3 15:59:51 screwdriver kernel: md: scsi/host4/bus0/target11/lun0/part1 [events: 00000019]<6>(write) scsi/host4/bus0/target11/lun0/part1's sb offset: 35005504
Feb 3 15:59:51 screwdriver kernel: md: scsi/host4/bus0/target10/lun0/part1 [events: 00000019]<6>(write) scsi/host4/bus0/target10/lun0/part1's sb offset: 35005504
Feb 3 15:59:51 screwdriver kernel: md: scsi/host4/bus0/target9/lun0/part1 [events: 00000019]<6>(write) scsi/host4/bus0/target9/lun0/part1's sb offset: 35005504
Feb 3 15:59:52 screwdriver kernel: md: scsi/host4/bus0/target8/lun0/part1 [events: 00000019]<6>(write) scsi/host4/bus0/target8/lun0/part1's sb offset: 35005504
Feb 3 15:59:52 screwdriver kernel: md: scsi/host4/bus0/target7/lun0/part1 [events: 00000019]<6>(write) scsi/host4/bus0/target7/lun0/part1's sb offset: 35005504
Feb 3 15:59:52 screwdriver kernel: md: scsi/host4/bus0/target6/lun0/part1 [events: 00000019]<6>(write) scsi/host4/bus0/target6/lun0/part1's sb offset: 35005504
Feb 3 15:59:52 screwdriver kernel: md: scsi/host4/bus0/target5/lun0/part1 [events: 00000019]<6>(write) scsi/host4/bus0/target5/lun0/part1's sb offset: 35005504
Feb 3 15:59:52 screwdriver kernel: md: scsi/host4/bus0/target4/lun0/part1 [events: 00000019]<6>(write) scsi/host4/bus0/target4/lun0/part1's sb offset: 35005504
Feb 3 15:59:52 screwdriver kernel: md: scsi/host4/bus0/target3/lun0/part1 [events: 00000019]<6>(write) scsi/host4/bus0/target3/lun0/part1's sb offset: 35005504
Feb 3 15:59:52 screwdriver kernel: md: scsi/host4/bus0/target2/lun0/part1 [events: 00000019]<6>(write) scsi/host4/bus0/target2/lun0/part1's sb offset: 35005504
Feb 3 15:59:52 screwdriver kernel: md: scsi/host4/bus0/target1/lun0/part1 [events: 00000019]<6>(write) scsi/host4/bus0/target1/lun0/part1's sb offset: 35005504
--snip--
^ permalink raw reply [flat|nested] 2+ messages in thread
* RE: Raid5 resyncs after every reboot
@ 2004-02-04 20:16 Rechenberg, Andrew
0 siblings, 0 replies; 2+ messages in thread
From: Rechenberg, Andrew @ 2004-02-04 20:16 UTC (permalink / raw)
To: Nathan Hunsperger, linux-raid
> -----Original Message-----
> From: linux-raid-owner@vger.kernel.org
> [mailto:linux-raid-owner@vger.kernel.org] On Behalf Of Nathan
> Hunsperger
> Sent: Tuesday, February 03, 2004 9:20 PM
> To: linux-raid@vger.kernel.org
> Subject: Raid5 resyncs after every reboot
>
> Hi -
>
> For some reason, my raid5 array resyncs after every reboot.
> I don't recall this happening originally, although I have had
> to hot-add disks after failures and upgrade mdadm between
> then and now.
>
> Below I have attached some logs of bootup.
>
> All of the event counters are identical, so I wouldn't expect
> to see a resync. Does the kernel not stop raid arrays that
> it did not start? I ask because the disks in question are
> attached to a controller which is started when its driver is
> loaded via a module. When the module is loaded, I have
> already seen md autodetect in the logs, and I have a
> mdadm-raid script in my bootscripts which kicks in. However,
> I don't have any kill scripts on shutdown. Lastly, after
> unmounting all file systems, I see something blink on console
> about md0 (I believe to the affect that it is in use) right
> before the actual reset.
From the last sentence above, it appears that your shutdown process
doesn't properly stop the RAID array and therefore it is not marked as
clean. I believe that when you deactivate an md raid1/5 array, it is
marked as clean and therefore doesn't require a rebuild upon
re-activation.
I would try putting an mdadm script in your shutdown process that stops
all of your arrays before the machine resets (if you have a
well-known/popular distro, this process should already be part of a
normal shutdown - if it's not working you should open a bug with your
distro provider).
Hope this helps,
Andy.
>
> If someone could provide insight into the resyncs (even
> though the event counters are the same), or validate what I
> think may be happening (meaning that md keeps a dirty bit
> around in addition to the event counter), I'd appreciate that.
>
> regards,
> Nathan
>
> Feb 3 15:59:51 screwdriver kernel: md: md driver 0.90.0
> MAX_MD_DEVS=256, MD_SB_DISKS=27 Feb 3 15:59:51 screwdriver
> kernel: md: Autodetecting RAID arrays.
> Feb 3 15:59:51 screwdriver kernel: md: autorun ...
> Feb 3 15:59:51 screwdriver kernel: md: ... autorun DONE.
> --snip--
> << module for controller loaded >>
> --snip--
> Feb 3 15:59:51 screwdriver kernel: [events: 00000018] Feb
> 3 15:59:51 screwdriver kernel: md:
> bind<scsi/host4/bus0/target1/lun0/part1,1>
> Feb 3 15:59:51 screwdriver kernel: [events: 00000018] Feb
> 3 15:59:51 screwdriver kernel: md:
> bind<scsi/host4/bus0/target2/lun0/part1,2>
> Feb 3 15:59:51 screwdriver kernel: [events: 00000018] Feb
> 3 15:59:51 screwdriver kernel: md:
> bind<scsi/host4/bus0/target3/lun0/part1,3>
> Feb 3 15:59:51 screwdriver kernel: [events: 00000018] Feb
> 3 15:59:51 screwdriver kernel: md:
> bind<scsi/host4/bus0/target4/lun0/part1,4>
> Feb 3 15:59:51 screwdriver kernel: [events: 00000018] Feb
> 3 15:59:51 screwdriver kernel: md:
> bind<scsi/host4/bus0/target5/lun0/part1,5>
> Feb 3 15:59:51 screwdriver kernel: [events: 00000018] Feb
> 3 15:59:51 screwdriver kernel: md:
> bind<scsi/host4/bus0/target6/lun0/part1,6>
> Feb 3 15:59:51 screwdriver kernel: [events: 00000018] Feb
> 3 15:59:51 screwdriver kernel: md:
> bind<scsi/host4/bus0/target7/lun0/part1,7>
> Feb 3 15:59:51 screwdriver kernel: [events: 00000018] Feb
> 3 15:59:51 screwdriver kernel: md:
> bind<scsi/host4/bus0/target8/lun0/part1,8>
> Feb 3 15:59:51 screwdriver kernel: [events: 00000018] Feb
> 3 15:59:51 screwdriver kernel: md:
> bind<scsi/host4/bus0/target9/lun0/part1,9>
> Feb 3 15:59:51 screwdriver kernel: [events: 00000018] Feb
> 3 15:59:51 screwdriver kernel: md:
> bind<scsi/host4/bus0/target10/lun0/part1,10>
> Feb 3 15:59:51 screwdriver kernel: [events: 00000018] Feb
> 3 15:59:51 screwdriver kernel: md:
> bind<scsi/host4/bus0/target11/lun0/part1,11>
> Feb 3 15:59:51 screwdriver kernel: [events: 00000018] Feb
> 3 15:59:51 screwdriver kernel: md:
> bind<scsi/host4/bus0/target12/lun0/part1,12>
> Feb 3 15:59:51 screwdriver kernel: [events: 00000018] Feb
> 3 15:59:51 screwdriver kernel: md:
> bind<scsi/host4/bus0/target13/lun0/part1,13>
> Feb 3 15:59:51 screwdriver kernel: [events: 00000018] Feb
> 3 15:59:51 screwdriver kernel: md:
> bind<scsi/host4/bus0/target0/lun0/part1,14>
> Feb 3 15:59:51 screwdriver kernel: md:
> scsi/host4/bus0/target0/lun0/part1's event counter: 00000018
> Feb 3 15:59:51 screwdriver kernel: md:
> scsi/host4/bus0/target13/lun0/part1's event counter: 00000018
> Feb 3 15:59:51 screwdriver kernel: md:
> scsi/host4/bus0/target12/lun0/part1's event counter: 00000018
> Feb 3 15:59:51 screwdriver kernel: md:
> scsi/host4/bus0/target11/lun0/part1's event counter: 00000018
> Feb 3 15:59:51 screwdriver kernel: md:
> scsi/host4/bus0/target10/lun0/part1's event counter: 00000018
> Feb 3 15:59:51 screwdriver kernel: md:
> scsi/host4/bus0/target9/lun0/part1's event counter: 00000018
> Feb 3 15:59:51 screwdriver kernel: md:
> scsi/host4/bus0/target8/lun0/part1's event counter: 00000018
> Feb 3 15:59:51 screwdriver kernel: md:
> scsi/host4/bus0/target7/lun0/part1's event counter: 00000018
> Feb 3 15:59:51 screwdriver kernel: md:
> scsi/host4/bus0/target6/lun0/part1's event counter: 00000018
> Feb 3 15:59:51 screwdriver kernel: md:
> scsi/host4/bus0/target5/lun0/part1's event counter: 00000018
> Feb 3 15:59:51 screwdriver kernel: md:
> scsi/host4/bus0/target4/lun0/part1's event counter: 00000018
> Feb 3 15:59:51 screwdriver kernel: md:
> scsi/host4/bus0/target3/lun0/part1's event counter: 00000018
> Feb 3 15:59:51 screwdriver kernel: md:
> scsi/host4/bus0/target2/lun0/part1's event counter: 00000018
> Feb 3 15:59:51 screwdriver kernel: md:
> scsi/host4/bus0/target1/lun0/part1's event counter: 00000018
> Feb 3 15:59:51 screwdriver kernel: md0: max total readahead
> window set to 3328k Feb 3 15:59:51 screwdriver kernel: md0:
> 13 data-disks, max readahead per data-disk: 256k Feb 3
> 15:59:51 screwdriver kernel: raid5: device
> scsi/host4/bus0/target0/lun0/part1 operational as raid disk 0
> Feb 3 15:59:51 screwdriver kernel: raid5: device
> scsi/host4/bus0/target13/lun0/part1 operational as raid disk
> 13 Feb 3 15:59:51 screwdriver kernel: raid5: device
> scsi/host4/bus0/target12/lun0/part1 operational as raid disk
> 12 Feb 3 15:59:51 screwdriver kernel: raid5: device
> scsi/host4/bus0/target11/lun0/part1 operational as raid disk
> 11 Feb 3 15:59:51 screwdriver kernel: raid5: device
> scsi/host4/bus0/target10/lun0/part1 operational as raid disk
> 10 Feb 3 15:59:51 screwdriver kernel: raid5: device
> scsi/host4/bus0/target9/lun0/part1 operational as raid disk 9
> Feb 3 15:59:51 screwdriver kernel: raid5: device
> scsi/host4/bus0/target8/lun0/part1 operational as raid disk 8
> Feb 3 15:59:51 screwdriver kernel: raid5: device
> scsi/host4/bus0/target7/lun0/part1 operational as raid disk 7
> Feb 3 15:59:51 screwdriver kernel: raid5: device
> scsi/host4/bus0/target6/lun0/part1 operational as raid disk 6
> Feb 3 15:59:51 screwdriver kernel: raid5: device
> scsi/host4/bus0/target5/lun0/part1 operational as raid disk 5
> Feb 3 15:59:51 screwdriver kernel: raid5: device
> scsi/host4/bus0/target4/lun0/part1 operational as raid disk 4
> Feb 3 15:59:51 screwdriver kernel: raid5: device
> scsi/host4/bus0/target3/lun0/part1 operational as raid disk 3
> Feb 3 15:59:51 screwdriver kernel: raid5: device
> scsi/host4/bus0/target2/lun0/part1 operational as raid disk 2
> Feb 3 15:59:51 screwdriver kernel: raid5: device
> scsi/host4/bus0/target1/lun0/part1 operational as raid disk 1
> Feb 3 15:59:51 screwdriver kernel: raid5: allocated 14819kB
> for md0 Feb 3 15:59:51 screwdriver kernel: raid5: raid level
> 5 set md0 active with 14 out of 14 devices, algorithm 2 Feb
> 3 15:59:51 screwdriver kernel: raid5: raid set md0 not clean;
> reconstructing parity Feb 3 15:59:51 screwdriver kernel:
> RAID5 conf printout:
> Feb 3 15:59:51 screwdriver kernel: --- rd:14 wd:14 fd:0 Feb
> 3 15:59:51 screwdriver kernel: disk 0, s:0, o:1, n:0 rd:0
> us:1 dev:scsi/host4/bus0/target0/lun0/part1
> Feb 3 15:59:51 screwdriver kernel: disk 1, s:0, o:1, n:1
> rd:1 us:1 dev:scsi/host4/bus0/target1/lun0/part1
> Feb 3 15:59:51 screwdriver kernel: disk 2, s:0, o:1, n:2
> rd:2 us:1 dev:scsi/host4/bus0/target2/lun0/part1
> Feb 3 15:59:51 screwdriver kernel: disk 3, s:0, o:1, n:3
> rd:3 us:1 dev:scsi/host4/bus0/target3/lun0/part1
> Feb 3 15:59:51 screwdriver kernel: disk 4, s:0, o:1, n:4
> rd:4 us:1 dev:scsi/host4/bus0/target4/lun0/part1
> Feb 3 15:59:51 screwdriver kernel: disk 5, s:0, o:1, n:5
> rd:5 us:1 dev:scsi/host4/bus0/target5/lun0/part1
> Feb 3 15:59:51 screwdriver kernel: disk 6, s:0, o:1, n:6
> rd:6 us:1 dev:scsi/host4/bus0/target6/lun0/part1
> Feb 3 15:59:51 screwdriver kernel: disk 7, s:0, o:1, n:7
> rd:7 us:1 dev:scsi/host4/bus0/target7/lun0/part1
> Feb 3 15:59:51 screwdriver kernel: disk 8, s:0, o:1, n:8
> rd:8 us:1 dev:scsi/host4/bus0/target8/lun0/part1
> Feb 3 15:59:51 screwdriver kernel: disk 9, s:0, o:1, n:9
> rd:9 us:1 dev:scsi/host4/bus0/target9/lun0/part1
> Feb 3 15:59:51 screwdriver kernel: disk 10, s:0, o:1, n:10
> rd:10 us:1 dev:scsi/host4/bus0/target10/lun0/part1
> Feb 3 15:59:51 screwdriver kernel: disk 11, s:0, o:1, n:11
> rd:11 us:1 dev:scsi/host4/bus0/target11/lun0/part1
> Feb 3 15:59:51 screwdriver kernel: disk 12, s:0, o:1, n:12
> rd:12 us:1 dev:scsi/host4/bus0/target12/lun0/part1
> Feb 3 15:59:51 screwdriver kernel: disk 13, s:0, o:1, n:13
> rd:13 us:1 dev:scsi/host4/bus0/target13/lun0/part1
> Feb 3 15:59:51 screwdriver kernel: RAID5 conf printout:
> Feb 3 15:59:51 screwdriver kernel: --- rd:14 wd:14 fd:0 Feb
> 3 15:59:51 screwdriver kernel: disk 0, s:0, o:1, n:0 rd:0
> us:1 dev:scsi/host4/bus0/target0/lun0/part1
> Feb 3 15:59:51 screwdriver kernel: disk 1, s:0, o:1, n:1
> rd:1 us:1 dev:scsi/host4/bus0/target1/lun0/part1
> Feb 3 15:59:51 screwdriver kernel: disk 2, s:0, o:1, n:2
> rd:2 us:1 dev:scsi/host4/bus0/target2/lun0/part1
> Feb 3 15:59:51 screwdriver kernel: disk 3, s:0, o:1, n:3
> rd:3 us:1 dev:scsi/host4/bus0/target3/lun0/part1
> Feb 3 15:59:51 screwdriver kernel: disk 4, s:0, o:1, n:4
> rd:4 us:1 dev:scsi/host4/bus0/target4/lun0/part1
> Feb 3 15:59:51 screwdriver kernel: disk 5, s:0, o:1, n:5
> rd:5 us:1 dev:scsi/host4/bus0/target5/lun0/part1
> Feb 3 15:59:51 screwdriver kernel: disk 6, s:0, o:1, n:6
> rd:6 us:1 dev:scsi/host4/bus0/target6/lun0/part1
> Feb 3 15:59:51 screwdriver kernel: disk 7, s:0, o:1, n:7
> rd:7 us:1 dev:scsi/host4/bus0/target7/lun0/part1
> Feb 3 15:59:51 screwdriver kernel: disk 8, s:0, o:1, n:8
> rd:8 us:1 dev:scsi/host4/bus0/target8/lun0/part1
> Feb 3 15:59:51 screwdriver kernel: disk 9, s:0, o:1, n:9
> rd:9 us:1 dev:scsi/host4/bus0/target9/lun0/part1
> Feb 3 15:59:51 screwdriver kernel: disk 10, s:0, o:1, n:10
> rd:10 us:1 dev:scsi/host4/bus0/target10/lun0/part1
> Feb 3 15:59:51 screwdriver kernel: disk 11, s:0, o:1, n:11
> rd:11 us:1 dev:scsi/host4/bus0/target11/lun0/part1
> Feb 3 15:59:51 screwdriver kernel: disk 12, s:0, o:1, n:12
> rd:12 us:1 dev:scsi/host4/bus0/target12/lun0/part1
> Feb 3 15:59:51 screwdriver kernel: disk 13, s:0, o:1, n:13
> rd:13 us:1 dev:scsi/host4/bus0/target13/lun0/part1
> Feb 3 15:59:51 screwdriver kernel: md: updating md0 RAID
> superblock on device Feb 3 15:59:51 screwdriver kernel: md:
> scsi/host4/bus0/target0/lun0/part1 [events:
> 00000019]<6>(write) scsi/host4/bus0/target0/lun0/part1's sb
> offset: 35005504 Feb 3 15:59:51 screwdriver kernel: md:
> syncing RAID array md0 Feb 3 15:59:51 screwdriver kernel:
> md: minimum _guaranteed_ reconstruction speed: 100 KB/sec/disc.
> Feb 3 15:59:51 screwdriver kernel: md: using maximum
> available idle IO bandwith (but not more than 100000 KB/sec)
> for reconstruction.
> Feb 3 15:59:51 screwdriver kernel: md: using 124k window,
> over a total of 35005504 blocks.
> Feb 3 15:59:51 screwdriver kernel: md:
> scsi/host4/bus0/target13/lun0/part1 [events:
> 00000019]<6>(write) scsi/host4/bus0/target13/lun0/part1's sb
> offset: 35005504 Feb 3 15:59:51 screwdriver kernel: md:
> scsi/host4/bus0/target12/lun0/part1 [events:
> 00000019]<6>(write) scsi/host4/bus0/target12/lun0/part1's sb
> offset: 35005504 Feb 3 15:59:51 screwdriver kernel: md:
> scsi/host4/bus0/target11/lun0/part1 [events:
> 00000019]<6>(write) scsi/host4/bus0/target11/lun0/part1's sb
> offset: 35005504 Feb 3 15:59:51 screwdriver kernel: md:
> scsi/host4/bus0/target10/lun0/part1 [events:
> 00000019]<6>(write) scsi/host4/bus0/target10/lun0/part1's sb
> offset: 35005504 Feb 3 15:59:51 screwdriver kernel: md:
> scsi/host4/bus0/target9/lun0/part1 [events:
> 00000019]<6>(write) scsi/host4/bus0/target9/lun0/part1's sb
> offset: 35005504 Feb 3 15:59:52 screwdriver kernel: md:
> scsi/host4/bus0/target8/lun0/part1 [events:
> 00000019]<6>(write) scsi/host4/bus0/target8/lun0/part1's sb
> offset: 35005504 Feb 3 15:59:52 screwdriver kernel: md:
> scsi/host4/bus0/target7/lun0/part1 [events:
> 00000019]<6>(write) scsi/host4/bus0/target7/lun0/part1's sb
> offset: 35005504 Feb 3 15:59:52 screwdriver kernel: md:
> scsi/host4/bus0/target6/lun0/part1 [events:
> 00000019]<6>(write) scsi/host4/bus0/target6/lun0/part1's sb
> offset: 35005504 Feb 3 15:59:52 screwdriver kernel: md:
> scsi/host4/bus0/target5/lun0/part1 [events:
> 00000019]<6>(write) scsi/host4/bus0/target5/lun0/part1's sb
> offset: 35005504 Feb 3 15:59:52 screwdriver kernel: md:
> scsi/host4/bus0/target4/lun0/part1 [events:
> 00000019]<6>(write) scsi/host4/bus0/target4/lun0/part1's sb
> offset: 35005504 Feb 3 15:59:52 screwdriver kernel: md:
> scsi/host4/bus0/target3/lun0/part1 [events:
> 00000019]<6>(write) scsi/host4/bus0/target3/lun0/part1's sb
> offset: 35005504 Feb 3 15:59:52 screwdriver kernel: md:
> scsi/host4/bus0/target2/lun0/part1 [events:
> 00000019]<6>(write) scsi/host4/bus0/target2/lun0/part1's sb
> offset: 35005504 Feb 3 15:59:52 screwdriver kernel: md:
> scsi/host4/bus0/target1/lun0/part1 [events:
> 00000019]<6>(write) scsi/host4/bus0/target1/lun0/part1's sb
> offset: 35005504
> --snip--
> -
> To unsubscribe from this list: send the line "unsubscribe
> linux-raid" in the body of a message to
> majordomo@vger.kernel.org More majordomo info at
> http://vger.kernel.org/majordomo-info.html
>
^ permalink raw reply [flat|nested] 2+ messages in thread
end of thread, other threads:[~2004-02-04 20:16 UTC | newest]
Thread overview: 2+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2004-02-04 2:19 Raid5 resyncs after every reboot Nathan Hunsperger
-- strict thread matches above, loose matches on Subject: below --
2004-02-04 20:16 Rechenberg, Andrew
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.