From: "Tvrtko A. Uršulin" <tvrtko@croadria.com>
To: xen-devel@lists.sourceforge.net
Cc: Keir Fraser <Keir.Fraser@cl.cam.ac.uk>
Subject: Re: Kernel panic while compiling kernel
Date: Thu, 12 Feb 2004 11:15:35 +0100 [thread overview]
Message-ID: <200402121115.35546.tvrtko@croadria.com> (raw)
In-Reply-To: <E1ArDOa-0000z1-00@wisbech.cl.cam.ac.uk>
[-- Attachment #1: Type: text/plain, Size: 653 bytes --]
On Thursday 12 February 2004 10:44, Keir Fraser wrote:
> Whoops. I forgot that in Xen 1.2, to get useful memory debugging you
> will need to edit common/memory.c and enable MEM_LOG() (change '#if 0'
> to '#if 1').
There were two compilation issues in that file after enablig that, I
quick-fixed id by adding two dummy parameteres (and formats) to the two
offending lines. Those were ones in form of MSG_LOG("text and no parms");
> I'll try to find some time to do a bit of testing myself today.
If it saves you some testing time here is the log with MSG_LOG turned on,
runlevel editor did the trick in DOM0 (didn't start other domain this time).
[-- Attachment #2: domain-3.log --]
[-- Type: text/x-log, Size: 16169 bytes --]
__ __ _ ____
\ \/ /___ _ __ / | |___ \
\ // _ \ '_ \ | | __) |
/ \ __/ | | | | |_ / __/
/_/\_\___|_| |_| |_(_)_____|
http://www.cl.cam.ac.uk/netos/xen
University of Cambridge Computer Laboratory
Xen version 1.2 (root@local) (gcc version 2.95.3 20010315 (release)) Thu Feb 12 11:05:18 CET 2004
Initialised all memory on a 1023MB machine
Reading BIOS drive-info tables at 0xfef6f and 0xfef6f
CPU0: Before vendor init, caps: bfebfbff 00000000 00000000, vendor = 0
CPU caps: afebfbff 00000000 00000000 00000000
found SMP MP-table at 000f07b0
Memory Reservation 0xf07b0, 4096 bytes
Memory Reservation 0xf03a0, 4096 bytes
Intel MultiProcessor Specification v1.4
Virtual Wire compatibility mode.
OEM ID: ASUS Product ID: PROD00000000 APIC at: 0xFEE00000
Processor #0 Pentium 4(tm) XEON(tm) APIC version 20
I/O APIC #4 Version 17 at 0xFEC00000.
I/O APIC #5 Version 17 at 0xFEC01000.
I/O APIC #6 Version 17 at 0xFEC02000.
Enabling APIC mode: Flat.Using 3 I/O APICs
Processors: 1
Initialising domains
Initialising schedulers
Initializing CPU#0
Detected 2666.051 MHz processor.
CPU0: Before vendor init, caps: bfebfbff 00000000 00000000, vendor = 0
CPU caps: afebfbff 00000000 00000000 00000000
CPU0 booted
enabled ExtINT on CPU#0
ESR value before enabling vector: 00000000
ESR value after enabling vector: 00000000
Error: only one processor found.
ENABLING IO-APIC IRQs
Setting 4 in the phys_id_present_map
...changing IO-APIC physical APIC ID to 4 ... ok.
Setting 5 in the phys_id_present_map
...changing IO-APIC physical APIC ID to 5 ... ok.
Setting 6 in the phys_id_present_map
...changing IO-APIC physical APIC ID to 6 ... ok.
init IO_APIC IRQs
IO-APIC (apicid-pin) 4-0, 4-3, 4-5, 4-10, 4-12, 5-0, 5-4, 5-6, 5-7, 5-8, 5-9, 5-10, 5-11, 5-12, 5-13, 5-14, 5-15, 6-0, 6-1, 6-2, 6-3, 6-4, 6-5, 6-6, 6-7, 6-8, 6-9, 6-10, 6-11, 6-12, 6-13, 6-14, 6-15 not connected.
..TIMER: vector=0x41 pin1=2 pin2=0
..MP-BIOS bug: 8254 timer not connected to IO-APIC
...trying to set up timer (IRQ0) through the 8259A ...
..... (found pin 0) ...works.
number of MP IRQ sources: 16.
number of IO-APIC #4 registers: 16.
number of IO-APIC #5 registers: 16.
number of IO-APIC #6 registers: 16.
testing the IO APIC.......................
IO APIC #4......
.... register #00: 04000000
....... : physical APIC id: 04
.... register #01: 000F0011
....... : max redirection entries: 000F
....... : PRQ implemented: 0
....... : IO APIC version: 0011
.... register #02: 04000000
....... : arbitration: 04
.... IRQ redirection table:
NR Log Phy Mask Trig IRR Pol Stat Dest Deli Vect:
00 001 01 0 0 0 0 0 1 1 41
01 0FF 0F 0 0 0 0 0 1 1 49
02 001 01 1 0 0 0 0 0 0 00
03 000 00 1 0 0 0 0 0 0 00
04 0FF 0F 0 0 0 0 0 1 1 51
05 000 00 1 0 0 0 0 0 0 00
06 0FF 0F 0 0 0 0 0 1 1 59
07 0FF 0F 0 0 0 0 0 1 1 61
08 0FF 0F 0 0 0 0 0 1 1 69
09 0FF 0F 0 0 0 0 0 1 1 71
0a 000 00 1 0 0 0 0 0 0 00
0b 0FF 0F 1 1 0 1 0 1 1 79
0c 000 00 1 0 0 0 0 0 0 00
0d 0FF 0F 0 0 0 0 0 1 1 81
0e 0FF 0F 0 0 0 0 0 1 1 89
0f 0FF 0F 0 0 0 0 0 1 1 91
IO APIC #5......
.... register #00: 05000000
....... : physical APIC id: 05
.... register #01: 000F0011
....... : max redirection entries: 000F
....... : PRQ implemented: 0
....... : IO APIC version: 0011
.... register #02: 05000000
....... : arbitration: 05
.... IRQ redirection table:
NR Log Phy Mask Trig IRR Pol Stat Dest Deli Vect:
00 000 00 1 0 0 0 0 0 0 00
01 0FF 0F 1 1 0 1 0 1 1 99
02 0FF 0F 1 1 0 1 0 1 1 A1
03 0FF 0F 1 1 0 1 0 1 1 A9
04 000 00 1 0 0 0 0 0 0 00
05 0FF 0F 1 1 0 1 0 1 1 B1
06 000 00 1 0 0 0 0 0 0 00
07 000 00 1 0 0 0 0 0 0 00
08 000 00 1 0 0 0 0 0 0 00
09 000 00 1 0 0 0 0 0 0 00
0a 000 00 1 0 0 0 0 0 0 00
0b 000 00 1 0 0 0 0 0 0 00
0c 000 00 1 0 0 0 0 0 0 00
0d 000 00 1 0 0 0 0 0 0 00
0e 000 00 1 0 0 0 0 0 0 00
0f 000 00 1 0 0 0 0 0 0 00
IO APIC #6......
.... register #00: 06000000
....... : physical APIC id: 06
.... register #01: 000F0011
....... : max redirection entries: 000F
....... : PRQ implemented: 0
....... : IO APIC version: 0011
.... register #02: 06000000
....... : arbitration: 06
.... IRQ redirection table:
NR Log Phy Mask Trig IRR Pol Stat Dest Deli Vect:
00 000 00 1 0 0 0 0 0 0 00
01 000 00 1 0 0 0 0 0 0 00
02 000 00 1 0 0 0 0 0 0 00
03 000 00 1 0 0 0 0 0 0 00
04 000 00 1 0 0 0 0 0 0 00
05 000 00 1 0 0 0 0 0 0 00
06 000 00 1 0 0 0 0 0 0 00
07 000 00 1 0 0 0 0 0 0 00
08 000 00 1 0 0 0 0 0 0 00
09 000 00 1 0 0 0 0 0 0 00
0a 000 00 1 0 0 0 0 0 0 00
0b 000 00 1 0 0 0 0 0 0 00
0c 000 00 1 0 0 0 0 0 0 00
0d 000 00 1 0 0 0 0 0 0 00
0e 000 00 1 0 0 0 0 0 0 00
0f 000 00 1 0 0 0 0 0 0 00
IRQ to pin mappings:
IRQ0 -> 0:0
IRQ1 -> 0:1
IRQ4 -> 0:4
IRQ6 -> 0:6
IRQ7 -> 0:7
IRQ8 -> 0:8
IRQ9 -> 0:9
IRQ11 -> 0:11
IRQ13 -> 0:13
IRQ14 -> 0:14
IRQ15 -> 0:15
IRQ17 -> 1:1
IRQ18 -> 1:2
IRQ19 -> 1:3
IRQ21 -> 1:5
.................................... done.
Using local APIC timer interrupts.
Calibrating APIC timer for CPU0...
..... CPU speed is 2666.1983 MHz.
..... Bus speed is 133.3098 MHz.
..... bus_scale = 0x00008883
ACT: Initialising Accurate timers
Time init:
.... System Time: 12117282ns
.... cpu_freq: 00000000:9EE8B770
.... scale: 00000001:8016AF58
.... Wall Clock: 1076580449s 0us
Start schedulers
PCI: PCI BIOS revision 2.10 entry at 0xf17b0, last bus=0
PCI: Using configuration type 1
PCI: Probing PCI hardware
PCI: Ignoring BAR0-3 of IDE controller 00:0f.1
PCI: Using IRQ router ServerWorks [1166/0203] at 00:0f.0
PCI->APIC IRQ transform: (B0,I3,P0) -> 18
PCI->APIC IRQ transform: (B0,I4,P0) -> 19
PCI->APIC IRQ transform: (B0,I6,P0) -> 21
PCI->APIC IRQ transform: (B0,I9,P0) -> 17
PCI->APIC IRQ transform: (B0,I15,P0) -> 11
Intel(R) PRO/1000 Network Driver - version 5.2.16
Copyright (c) 1999-2003 Intel Corporation.
3c59x: Donald Becker and others. www.scyld.com/network/vortex.html
00:06.0: 3Com PCI 3c905C Tornado at 0xd400. Vers LK1.1.16
tg3.c:v2.3 (November 5, 2003)
eth1: Tigon3 [partno(BCM95702A20) rev 1002 PHY(5703)] (PCI:33MHz:32-bit) 10/100/1000BaseT Ethernet 00:08:02:f7:c1:fa
Uniform Multi-Platform E-IDE driver Revision: 6.31
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
PCI_IDE: unknown IDE controller on PCI bus 00 device 79, VID=1166, DID=0213
PCI_IDE: chipset revision 160
PCI_IDE: not 100% native mode: will probe irqs later
ide0: BM-DMA at 0xa400-0xa407, BIOS settings: hda:pio, hdb:pio
ide1: BM-DMA at 0xa408-0xa40f, BIOS settings: hdc:DMA, hdd:pio
hdc: HL-DT-ST CD-ROM GCR-8482B, ATAPI CD/DVD-ROM drive
ide1 at 0x170-0x177,0x376 on irq 15
hdc: ATAPI 48X CD-ROM drive, 128kB Cache
Uniform CD-ROM driver Revision: 3.12
SCSI subsystem driver Revision: 1.00
Red Hat/Adaptec aacraid driver (1.1.2 Feb 12 2004 11:05:39)
scsi0 : Adaptec AIC7XXX EISA/VLB/PCI SCSI HBA DRIVER, Rev 6.2.8
<Adaptec (Compaq OEM) 29160 Ultra160 SCSI adapter>
Vendor: COMPAQ Model: BD03695CC8 Rev: HPB6
Type: Direct-Access ANSI SCSI revision: 03
(scsi0:A:0): 160.000MB/s transfers (80.000MHz DT, offset 127, 16bit)
Vendor: MAXTOR Model: ATLAS10K4_36WLS Rev: DFV0
Type: Direct-Access ANSI SCSI revision: 03
(scsi0:A:1): 160.000MB/s transfers (80.000MHz DT, offset 127, 16bit)
Vendor: MAXTOR Model: ATLAS10K4_36WLS Rev: DFV0
Type: Direct-Access ANSI SCSI revision: 03
(scsi0:A:2): 160.000MB/s transfers (80.000MHz DT, offset 127, 16bit)
scsi0:A:0:0: Tagged Queuing enabled. Depth 253
scsi0:A:1:0: Tagged Queuing enabled. Depth 253
scsi0:A:2:0: Tagged Queuing enabled. Depth 253
Attached scsi disk sda at scsi0, channel 0, id 0, lun 0
Attached scsi disk sdb at scsi0, channel 0, id 1, lun 0
Attached scsi disk sdc at scsi0, channel 0, id 2, lun 0
SCSI device sda: 71132000 512-byte hdwr sectors (36420 MB)
SCSI device sdb: 71833096 512-byte hdwr sectors (36779 MB)
SCSI device sdc: 71833096 512-byte hdwr sectors (36779 MB)
Device eth0 opened and ready for use.
DOM0: Guest OS virtual load address is c0000000
DOM0: xen_console_init
DOM0: Linux version 2.4.24-xeno (root@xen) (gcc version 2.95.3 20010315 (release)) #7 Wed Feb 11 16:31:22 CET 2004
DOM0: On node 0 totalpages: 32768
DOM0: zone(0): 4096 pages.
DOM0: zone(1): 28672 pages.
DOM0: zone(2): 0 pages.
DOM0: Kernel command line: (hd0,0)/xenolinux.gz root=/dev/sda3 console=tty0 console=xencons0
DOM0: Initializing CPU#0
DOM0: Xen reported: 2666.051 MHz processor.
DOM0: Console: colour VGA+ 80x25
DOM0: Linux version 2.4.24-xeno (root@xen) (gcc version 2.95.3 20010315 (release)) #7 Wed Feb 11 16:31:22 CET 2004
DOM0: On node 0 totalpages: 32768
DOM0: zone(0): 4096 pages.
DOM0: zone(1): 28672 pages.
DOM0: zone(2): 0 pages.
DOM0: Kernel command line: (hd0,0)/xenolinux.gz root=/dev/sda3 console=tty0 console=xencons0
DOM0: Initializing CPU#0
DOM0: Xen reported: 2666.051 MHz processor.
DOM0: Console: colour VGA+ 80x25
DOM0: Calibrating delay loop... 23540.53 BogoMIPS
DOM0: Memory: 127972k/131072k available (937k kernel code, 3100k reserved, 235k data, 32k init, 0k highmem)
DOM0: Dentry cache hash table entries: 16384 (order: 5, 131072 bytes)
DOM0: Inode cache hash table entries: 8192 (order: 4, 65536 bytes)
DOM0: Mount cache hash table entries: 512 (order: 0, 4096 bytes)
DOM0: Buffer cache hash table entries: 8192 (order: 3, 32768 bytes)
DOM0: Page-cache hash table entries: 32768 (order: 5, 131072 bytes)
DOM0: CPU: L1 I cache: 12K, L1 D cache: 8K
DOM0: CPU: L2 cache: 512K
DOM0: CPU: Intel(R) Pentium(R) 4 CPU 2.66GHz stepping 09
DOM0: POSIX conformance testing by UNIFIX
DOM0: Linux NET4.0 for Linux 2.4
DOM0: Based upon Swansea University Computer Society NET3.039
DOM0: Initializing RT netlink socket
DOM0: Starting kswapd
DOM0: Journalled Block Device driver loaded
DOM0: Xeno console successfully installed
DOM0: Successfully installed virtual firewall/router interface
DOM0: Starting Xeno Balloon driver
DOM0: pty: 256 Unix98 ptys configured
DOM0: Partition check:
DOM0: sda: sda1 sda2 sda3 sda4
DOM0: sdb: sdb1
DOM0: sdc: unknown partition table
DOM0: Skipping partition check on cdrom /dev/hdc
DOM0: NET4: Linux TCP/IP 1.0 for NET4.0
DOM0: IP Protocols: ICMP, UDP, TCP
DOM0: IP: routing cache hash table of 1024 buckets, 8Kbytes
DOM0: TCP: Hash tables configured (established 8192 bind 8192)
DOM0: NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
DOM0: root_device_name = sda3
DOM0: kjournald starting. Commit interval 5 seconds
DOM0: EXT3 FS 2.4-0.9.19, 19 August 2002 on sd(8,3), internal journal
DOM0: EXT3-fs: mounted filesystem with ordered data mode.
DOM0: VFS: Mounted root (ext3 filesystem).
DOM0: Freeing unused kernel memory: 32k freed
DOM0: INIT: version 2.82 booting
DOM0: System Boot Control: Running /etc/init.d/boot
DOM0: Mounting /proc filesystem7[?25l[80C[10D[1;32mdone[m8[?25h
DOM0: Mounting /dev/pts7[?25l[80C[10D[1;32mdone[m8[?25h
DOM0: [m[?25hmodprobe: modprobe: Can't locate module block-major-9
DOM0: [m[?25hshowconsole: Warning: the ioctl TIOCGDEV is not known by the kernel
DOM0: /etc/init.d/boot.d/S04boot.lvm: line 28: [: =: unary operator expected
DOM0: [m[?25hActivating swap-devices in /etc/fstab...
DOM0: Adding Swap: 530136k swap-space (priority 42)
DOM0: 7[?25l[1A[80C[10D[1;32mdone[m8[?25hshowconsole: Warning: the ioctl TIOCGDEV is not known by the kernel
DOM0: /etc/init.d/boot.d/S05boot.localfs: line 58: [: =: unary operator expected
DOM0: Checking file systems...
DOM0: fsck 1.34 (25-Jul-2003)
DOM0: /dev/sda3: clean, 94626/788704 files, 368406/1574370 blocks
DOM0: /dev/sda1: clean, 44/10040 files, 13982/40128 blocks
DOM0: 7[?25l[1A[80C[10D[1;32mdone[m8[?25hEXT3 FS 2.4-0.9.19, 19 August 2002 on sd(8,3), internal journal
DOM0: Mounting local file systems...
DOM0: proc on /proc type proc (rw)
DOM0: devpts on /dev/pts type devpts (rw,mode=0620,gid=5)
DOM0: kjournald starting. Commit interval 5 seconds
DOM0: EXT3 FS 2.4-0.9.19, 19 August 2002 on sd(8,1), internal journal
DOM0: EXT3-fs: mounted filesystem with ordered data mode.
DOM0: /dev/sda1 on /boot type ext3 (rw)
DOM0: 7[?25l[1A[80C[10D[1;32mdone[m8[?25h[m[?25h[m[?25hActivating remaining swap-devices in /etc/fstab...
DOM0: 7[?25l[1A[80C[10D[1;32mdone[m8[?25hMounting shared memory FS on /dev/shm[80C[10D[1;32mdone[m
DOM0: Loading required kernel modules
DOM0: 7[?25l[1A[80C[10D[1;32mdone[m8[?25hRestore device permissions7[?25l[80C[10D[1;32mdone[m8[?25h
DOM0: [m[?25hSetting up the CMOS clock7[?25l[80C[10D[1;32mdone[m8[?25h
DOM0: [m[?25hSetting up timezone data7[?25l[80C[10D[1;32mdone[m8[?25h
DOM0: [m[?25hSetting scheduling timeslices 7[?25l[80C[10D[1munused[m8[?25h
DOM0: Setting up hostname 'xen'7[?25l[80C[10D[1;32mdone[m8[?25h
DOM0: Setting up loopback interface 7[?25l[80C[10D[1;32mdone[m8[?25h
DOM0: [m[?25hEnabling syn flood protection[80C[10D[1;32mdone[m
DOM0: Disabling IP forwarding7[?25l[80C[10D[1;32mdone[m8[?25h
DOM0: Creating /var/log/boot.msg
DOM0: 7[?25l[1A[80C[10D[1;32mdone[m8[?25hshowconsole: Warning: the ioctl TIOCGDEV is not known by the kernel
DOM0: /etc/init.d/boot.d/S11boot.klog: line 40: test: =: unary operator expected
DOM0: [m[?25hSystem Boot Control: The system has been [80C[10D[1msetup[m
DOM0: Skipped features: [80C[17D[1;33mboot.sched[m
DOM0: System Boot Control: Running /etc/init.d/boot.local
DOM0: 7[?25l[1A[80C[10D[1;32mdone[m8[?25hINIT: Entering runlevel: 3
DOM0: Master Resource Control: previous runlevel: N, switching to runlevel: [80C[10D[1m3[m
DOM0: Initializing random number generator7[?25l[80C[10D[1;32mdone[m8[?25h
DOM0: [m[?25hSetting up network interfaces:
DOM0: lo 7[?25l[80C[10D[1;32mdone[m8[?25h
DOM0: eth0 IP/Netmask: 10.0.0.2 / 255.255.255.0 7[?25l[80C[10D[1;32mdone[m8[?25h
DOM0: [m[?25hStarting syslog services7[?25l[80C[10D[1;32mdone[m8[?25h
DOM0: [m[?25hStarting hotplugging services [ ieee1394 net pci usb .. ]7[?25l[80C[10D[1;31mfailed[m8[?25h
DOM0: [m[?25hStarting RPC portmap daemon7[?25l[80C[10D[1;32mdone[m8[?25h
DOM0: [m[?25hStarting mail service (Postfix)7[?25l[80C[10D[1;32mdone[m8[?25h
DOM0: [m[?25hACPID: No ACPI support in kernel[80C[10D[1;33mskipped[m
DOM0: Starting CRON daemon7[?25l[80C[10D[1;32mdone[m8[?25h
DOM0: Starting Name Service Cache Daemon7[?25l[80C[10D[1;32mdone[m8[?25h
DOM0: Starting SSH daemon7[?25l[80C[10D[1;32mdone[m8[?25h
DOM0: [m[?25hLoading keymap qwertz/croat.map.gz
DOM0: 7[?25l[1A[80C[10D[1;32mdone[m8[?25hNo bios found at: 0xc0000
DOM0: v_bios: No such file or directory
DOM0: Loading compose table latin1.add7[?25l[80C[10D[1;32mdone[m8[?25h
DOM0: Stop Unicode mode
DOM0: 7[?25l[1A[80C[10D[1;32mdone[m8[?25hLoading console font lat1-16.psfu -m none (B
DOM0: 7[?25l[1A[80C[10D[1;32mdone[m8[?25h[m[?25hStarting hardware scan on boot/etc/init.d/rc3.d/S15hwscan: line 55: /dev/tty: No such device or address
DOM0: [m[?25hMaster Resource Control: runlevel 3 has been [80C[10D[1mreached[m
DOM0: Failed services in runlevel 3: [80C[21D[1;31mhotplug hwscan[m
DOM0: Skipped services in runlevel 3: [80C[12D[1;33macpid[m
DOM0: (file=memory.c, line=768) Pfn 00006be9 already pinned
DOM0: Kernel panic: Failed mmu update: c013eea8, 4
DOM0: (file=memory.c, line=768) Pfn 00006be9 already pinned
Domain 0 killed: rebooting machine!
next prev parent reply other threads:[~2004-02-12 10:15 UTC|newest]
Thread overview: 49+ messages / expand[flat|nested] mbox.gz Atom feed top
2004-02-11 11:12 Kernel panic while compiling kernel Tvrtko A. Uršulin
2004-02-11 11:22 ` Keir Fraser
2004-02-11 12:20 ` Tvrtko A. Uršulin
2004-02-12 9:38 ` Tvrtko A. Uršulin
2004-02-12 9:44 ` Keir Fraser
2004-02-12 10:15 ` Tvrtko A. Uršulin [this message]
2004-02-12 10:26 ` Keir Fraser
2004-02-12 10:55 ` Tvrtko A. Uršulin
2004-02-12 11:06 ` Keir Fraser
2004-02-12 11:14 ` Tvrtko A. Uršulin
2004-02-12 11:41 ` Tvrtko A. Uršulin
2004-02-12 11:44 ` Keir Fraser
2004-02-12 12:05 ` Tvrtko A. Uršulin
2004-02-12 14:07 ` Keir Fraser
2004-02-12 14:23 ` Tvrtko A. Uršulin
2004-02-12 14:42 ` Keir Fraser
2004-02-12 14:56 ` Tvrtko A. Uršulin
2004-02-12 17:32 ` Keir Fraser
2004-02-13 8:39 ` Tvrtko A. Uršulin
2004-02-13 8:43 ` Tvrtko A. Uršulin
2004-02-13 8:50 ` Ian Pratt
2004-02-13 9:06 ` Tvrtko A. Uršulin
2004-02-13 9:08 ` Keir Fraser
2004-02-13 10:55 ` Tvrtko A. Uršulin
2004-02-13 11:10 ` Keir Fraser
2004-02-13 11:22 ` Tvrtko A. Uršulin
2004-02-13 11:36 ` Keir Fraser
2004-02-13 11:42 ` Tvrtko A. Uršulin
2004-02-13 12:03 ` Tvrtko A. Uršulin
2004-02-13 14:01 ` Keir Fraser
2004-02-16 10:53 ` Tvrtko A. Uršulin
2004-02-16 11:19 ` Keir Fraser
2004-02-16 12:12 ` Tvrtko A. Uršulin
2004-02-16 13:55 ` Keir Fraser
2004-02-16 13:59 ` Keir Fraser
2004-02-16 14:41 ` Tvrtko A. Uršulin
2004-02-16 15:06 ` Keir Fraser
2004-02-16 16:28 ` Tvrtko A. Uršulin
2004-02-16 17:22 ` Keir Fraser
2004-02-18 1:49 ` Zachary Amsden
2004-02-18 6:45 ` Nuno Silva
2004-02-18 8:11 ` Keir Fraser
2004-02-18 12:17 ` Tvrtko A. Uršulin
2004-02-18 19:08 ` Zachary Amsden
2004-02-18 19:54 ` Keir Fraser
2004-02-18 19:58 ` Zachary Amsden
2004-02-18 20:06 ` Keir Fraser
2004-02-18 20:11 ` Zachary Amsden
2004-02-17 10:45 ` Keir Fraser
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=200402121115.35546.tvrtko@croadria.com \
--to=tvrtko@croadria.com \
--cc=Keir.Fraser@cl.cam.ac.uk \
--cc=xen-devel@lists.sourceforge.net \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.