* [uml-devel] /dev/anon without /dev/anon ?
@ 2004-02-12 15:02 Matt Ayres
2004-02-12 20:43 ` Peter
0 siblings, 1 reply; 6+ messages in thread
From: Matt Ayres @ 2004-02-12 15:02 UTC (permalink / raw)
To: user-mode-linux-devel
Hi,
I had tried out the /dev/anon patch on a host server, success wasn't too
good. It crashed after a few hours of running. This was without
ubd=mmap passed to the UML's. Unfortunately I do not have any sort of
OOPs.
Now the interesting part, I rebooted with the previous kernel so it does
not have the /dev/anon kernel patch. The /dev/anon device still exists
and the UML's are using it!
My primary question now is, is this a "bad thing" to do? Would there be
any significant performance problems to just let it run this way?
Shouldn't the UML kernel check to make sure that /dev/anon kernel
support is indeed there?
Thanks,
Matt
-------------------------------------------------------
SF.Net is sponsored by: Speed Start Your Linux Apps Now.
Build and deploy apps & Web services for Linux with
a free DVD software kit from IBM. Click Now!
http://ads.osdn.com/?ad_id=1356&alloc_id=3438&op=click
_______________________________________________
User-mode-linux-devel mailing list
User-mode-linux-devel@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/user-mode-linux-devel
^ permalink raw reply [flat|nested] 6+ messages in thread
* Re: [uml-devel] /dev/anon without /dev/anon ?
2004-02-12 15:02 [uml-devel] /dev/anon without /dev/anon ? Matt Ayres
@ 2004-02-12 20:43 ` Peter
2004-02-12 21:51 ` Jeff Dike
0 siblings, 1 reply; 6+ messages in thread
From: Peter @ 2004-02-12 20:43 UTC (permalink / raw)
To: user-mode-linux-devel
This may just be noise, but I also had a host server with 2.4.24 + skas3 + /dev/anon that crashed yesterday after a day or so of running. Not using ubd=mmap.
Regards, Peter
----- Original Message -----
From: "Matt Ayres" <matta@tektonic.net>
To: <user-mode-linux-devel@lists.sourceforge.net>
Sent: Friday, February 13, 2004 4:02 AM
Subject: [uml-devel] /dev/anon without /dev/anon ?
> Hi,
>
> I had tried out the /dev/anon patch on a host server, success wasn't too
> good. It crashed after a few hours of running. This was without
> ubd=mmap passed to the UML's. Unfortunately I do not have any sort of
> OOPs.
-------------------------------------------------------
SF.Net is sponsored by: Speed Start Your Linux Apps Now.
Build and deploy apps & Web services for Linux with
a free DVD software kit from IBM. Click Now!
http://ads.osdn.com/?ad_id\x1356&alloc_id438&opÌk
_______________________________________________
User-mode-linux-devel mailing list
User-mode-linux-devel@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/user-mode-linux-devel
^ permalink raw reply [flat|nested] 6+ messages in thread
* Re: [uml-devel] /dev/anon without /dev/anon ?
2004-02-12 21:51 ` Jeff Dike
@ 2004-02-12 21:28 ` Peter
2004-02-12 21:49 ` Matt Ayres
2004-02-12 23:40 ` Jeff Dike
0 siblings, 2 replies; 6+ messages in thread
From: Peter @ 2004-02-12 21:28 UTC (permalink / raw)
To: Jeff Dike; +Cc: user-mode-linux-devel
I don't go near tt UMLs. This these are all using skas UMLs. Is there anyway I can disable /dev/anon without rebuilding the kernel. rm /dev/anon?
Regards, Peter
----- Original Message -----
From: "Jeff Dike" <jdike@addtoit.com>
To: "Peter" <support@rimuhosting.com>
Cc: <user-mode-linux-devel@lists.sourceforge.net>
Sent: Friday, February 13, 2004 10:51 AM
Subject: Re: [uml-devel] /dev/anon without /dev/anon ?
> On Fri, Feb 13, 2004 at 09:43:09AM +1300, Peter wrote:
> > This may just be noise, but I also had a host server with 2.4.24 + skas3 + /dev/anon that crashed yesterday after a day or so of running. Not using ubd=mmap.
>
> Yeah, the patch is not quite kosher. I've had no problems whatsoever running
> skas UMLs, but tt UMLs won't boot with devanon.
>
> Jeff
>
-------------------------------------------------------
SF.Net is sponsored by: Speed Start Your Linux Apps Now.
Build and deploy apps & Web services for Linux with
a free DVD software kit from IBM. Click Now!
http://ads.osdn.com/?ad_id\x1356&alloc_id438&opÌk
_______________________________________________
User-mode-linux-devel mailing list
User-mode-linux-devel@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/user-mode-linux-devel
^ permalink raw reply [flat|nested] 6+ messages in thread
* Re: [uml-devel] /dev/anon without /dev/anon ?
2004-02-12 21:28 ` Peter
@ 2004-02-12 21:49 ` Matt Ayres
2004-02-12 23:40 ` Jeff Dike
1 sibling, 0 replies; 6+ messages in thread
From: Matt Ayres @ 2004-02-12 21:49 UTC (permalink / raw)
To: Peter; +Cc: Jeff Dike, user-mode-linux-devel
Yes, that will work. I forgot to mknod /dev/anon the first time I
tested it and the UML's did not use it.
I'm still perplexed as to my situation though :)
On Thu, 2004-02-12 at 16:28, Peter wrote:
> I don't go near tt UMLs. This these are all using skas UMLs. Is there anyway I can disable /dev/anon without rebuilding the kernel. rm /dev/anon?
>
> Regards, Peter
> ----- Original Message -----
> From: "Jeff Dike" <jdike@addtoit.com>
> To: "Peter" <support@rimuhosting.com>
> Cc: <user-mode-linux-devel@lists.sourceforge.net>
> Sent: Friday, February 13, 2004 10:51 AM
> Subject: Re: [uml-devel] /dev/anon without /dev/anon ?
>
>
> > On Fri, Feb 13, 2004 at 09:43:09AM +1300, Peter wrote:
> > > This may just be noise, but I also had a host server with 2.4.24 + skas3 + /dev/anon that crashed yesterday after a day or so of running. Not using ubd=mmap.
> >
> > Yeah, the patch is not quite kosher. I've had no problems whatsoever running
> > skas UMLs, but tt UMLs won't boot with devanon.
> >
> > Jeff
> >
>
>
> -------------------------------------------------------
> SF.Net is sponsored by: Speed Start Your Linux Apps Now.
> Build and deploy apps & Web services for Linux with
> a free DVD software kit from IBM. Click Now!
> http://ads.osdn.com/?ad_id\x1356&alloc_id438&op=click
> _______________________________________________
> User-mode-linux-devel mailing list
> User-mode-linux-devel@lists.sourceforge.net
> https://lists.sourceforge.net/lists/listinfo/user-mode-linux-devel
--
Matt Ayres <matta@tektonic.net>
TekTonic
-------------------------------------------------------
SF.Net is sponsored by: Speed Start Your Linux Apps Now.
Build and deploy apps & Web services for Linux with
a free DVD software kit from IBM. Click Now!
http://ads.osdn.com/?ad_id=1356&alloc_id=3438&op=click
_______________________________________________
User-mode-linux-devel mailing list
User-mode-linux-devel@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/user-mode-linux-devel
^ permalink raw reply [flat|nested] 6+ messages in thread
* Re: [uml-devel] /dev/anon without /dev/anon ?
2004-02-12 20:43 ` Peter
@ 2004-02-12 21:51 ` Jeff Dike
2004-02-12 21:28 ` Peter
0 siblings, 1 reply; 6+ messages in thread
From: Jeff Dike @ 2004-02-12 21:51 UTC (permalink / raw)
To: Peter; +Cc: user-mode-linux-devel
On Fri, Feb 13, 2004 at 09:43:09AM +1300, Peter wrote:
> This may just be noise, but I also had a host server with 2.4.24 + skas3 + /dev/anon that crashed yesterday after a day or so of running. Not using ubd=mmap.
Yeah, the patch is not quite kosher. I've had no problems whatsoever running
skas UMLs, but tt UMLs won't boot with devanon.
Jeff
-------------------------------------------------------
SF.Net is sponsored by: Speed Start Your Linux Apps Now.
Build and deploy apps & Web services for Linux with
a free DVD software kit from IBM. Click Now!
http://ads.osdn.com/?ad_id=1356&alloc_id=3438&op=click
_______________________________________________
User-mode-linux-devel mailing list
User-mode-linux-devel@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/user-mode-linux-devel
^ permalink raw reply [flat|nested] 6+ messages in thread
* Re: [uml-devel] /dev/anon without /dev/anon ?
2004-02-12 21:28 ` Peter
2004-02-12 21:49 ` Matt Ayres
@ 2004-02-12 23:40 ` Jeff Dike
1 sibling, 0 replies; 6+ messages in thread
From: Jeff Dike @ 2004-02-12 23:40 UTC (permalink / raw)
To: Peter; +Cc: user-mode-linux-devel
On Fri, Feb 13, 2004 at 10:28:14AM +1300, Peter wrote:
> Is there anyway I can disable /dev/anon without rebuilding the kernel. rm /dev/anon?
That'll work. I chmod 600 /dev/anon, but it works out the same.
Jeff
-------------------------------------------------------
SF.Net is sponsored by: Speed Start Your Linux Apps Now.
Build and deploy apps & Web services for Linux with
a free DVD software kit from IBM. Click Now!
http://ads.osdn.com/?ad_id=1356&alloc_id=3438&op=click
_______________________________________________
User-mode-linux-devel mailing list
User-mode-linux-devel@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/user-mode-linux-devel
^ permalink raw reply [flat|nested] 6+ messages in thread
end of thread, other threads:[~2004-02-12 23:15 UTC | newest]
Thread overview: 6+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2004-02-12 15:02 [uml-devel] /dev/anon without /dev/anon ? Matt Ayres
2004-02-12 20:43 ` Peter
2004-02-12 21:51 ` Jeff Dike
2004-02-12 21:28 ` Peter
2004-02-12 21:49 ` Matt Ayres
2004-02-12 23:40 ` Jeff Dike
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.