* Firewire broken in 2.6.4 (detects disk but times out mounting)
@ 2004-03-19 22:03 Felix von Leitner
0 siblings, 0 replies; only message in thread
From: Felix von Leitner @ 2004-03-19 22:03 UTC (permalink / raw)
To: linux-kernel
Here's what happens:
Mar 19 22:00:47 hellhound ieee1394: sbp2: Logged into SBP-2 device
Mar 19 22:00:47 hellhound ieee1394: sbp2: Node 0-00:1023: Max speed [S400] - Max payload [2048]
Mar 19 22:00:47 hellhound Vendor: Maxtor Model: 5000DV Rev: 0100
Mar 19 22:00:47 hellhound Type: Direct-Access ANSI SCSI revision: 06
Mar 19 22:00:47 hellhound SCSI device sda: 490232832 512-byte hdwr sectors (250999 MB)
Mar 19 22:00:47 hellhound sda: asking for cache data failed
Mar 19 22:00:47 hellhound sda: assuming drive cache: write through
Mar 19 22:00:47 hellhound /dev/scsi/host0/bus0/target1/lun0: p1
Mar 19 22:00:47 hellhound Attached scsi disk sda at scsi0, channel 0, id 1, lun 0
Mar 19 22:00:47 hellhound ip1394: $Rev: 1175 $ Ben Collins <bcollins@debian.org>
Mar 19 22:00:47 hellhound ip1394: eth2: IEEE-1394 IPv4 over 1394 Ethernet (fw-host0)
[...]
Mar 19 22:01:21 hellhound ieee1394: sbp2: aborting sbp2 command
Mar 19 22:01:21 hellhound 0x28 00 00 00 00 3f 00 00 01 00
Mar 19 22:01:31 hellhound ieee1394: sbp2: aborting sbp2 command
Mar 19 22:01:31 hellhound 0x00 00 00 00 00 00
Mar 19 22:01:31 hellhound ieee1394: sbp2: reset requested
Mar 19 22:01:31 hellhound ieee1394: sbp2: Generating sbp2 fetch agent reset
Mar 19 22:01:41 hellhound ieee1394: sbp2: aborting sbp2 command
Mar 19 22:01:41 hellhound 0x00 00 00 00 00 00
Mar 19 22:01:41 hellhound ieee1394: sbp2: reset requested
Mar 19 22:01:41 hellhound ieee1394: sbp2: Generating sbp2 fetch agent reset
Mar 19 22:02:01 hellhound ieee1394: sbp2: aborting sbp2 command
Mar 19 22:02:01 hellhound 0x00 00 00 00 00 00
Mar 19 22:02:01 hellhound ieee1394: sbp2: reset requested
Mar 19 22:02:01 hellhound ieee1394: sbp2: Generating sbp2 fetch agent reset
Mar 19 22:02:21 hellhound ieee1394: sbp2: aborting sbp2 command
Mar 19 22:02:21 hellhound 0x00 00 00 00 00 00
Mar 19 22:02:21 hellhound scsi: Device offlined - not ready after error recovery: host 0 channel 0 id 1 lun 0
Mar 19 22:02:21 hellhound SCSI error : <0 0 1 0> return code = 0x50000
Mar 19 22:02:21 hellhound end_request: I/O error, dev sda, sector 63
Mar 19 22:02:21 hellhound FAT: unable to read boot sector
Any idea? It is not a general read failure since reading the partition table
worked. This is on a VIA Athlon XP board.
Felix
^ permalink raw reply [flat|nested] only message in thread
only message in thread, other threads:[~2004-03-19 22:03 UTC | newest]
Thread overview: (only message) (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2004-03-19 22:03 Firewire broken in 2.6.4 (detects disk but times out mounting) Felix von Leitner
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.