All of lore.kernel.org
 help / color / mirror / Atom feed
From: Jesse Allen <the3dfxdude@hotmail.com>
To: linux-kernel@vger.kernel.org
Subject: RE: IO-APIC on nforce2 [PATCH] + [PATCH] for nmi_debug=1 + [PATCH] for idle=C1halt, 2.6.5
Date: Tue, 4 May 2004 13:38:40 -0700	[thread overview]
Message-ID: <20040504203840.GA2102@tesore.local> (raw)

Allen Martin wrote:
> This will require changing the value for register at bus:0 dev:0 func:0
> offset 6c.
>
> Chip   Current Value   New Value
> C17       1F0FFF01     1F01FF01
> C18D      9F0FFF01     9F01FF01
>
> Northbridge chip version may be determined by reading the PCI revision
> ID (offset 8) of the host bridge at bus:0 dev:0 func:0.  C1 or greater
> is C18D.

I believe I have confirmed that the Shuttle AN35N BIOS indeed has this fix as
of Dec 5th 03 version.

lspci -xxx -vvv
00:00.0 Host bridge: nVidia Corporation nForce2 AGP (different version?) 
(rev c1)
...
60: 08 00 01 20 20 00 88 80 10 00 00 00 01 ff 01 9f

Jesse


             reply	other threads:[~2004-05-04 20:38 UTC|newest]

Thread overview: 73+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2004-05-04 20:38 Jesse Allen [this message]
2004-05-04 21:14 ` IO-APIC on nforce2 [PATCH] + [PATCH] for nmi_debug=1 + [PATCH] for idle=C1halt, 2.6.5 Craig Bradney
  -- strict thread matches above, loose matches on Subject: below --
2004-05-03 22:09 Allen Martin
2004-05-03 23:11 ` Bartlomiej Zolnierkiewicz
2004-05-04  8:28   ` Prakash K. Cheemplavam
2004-05-04 21:10   ` Jeff Garzik
2004-05-04 21:29     ` Bartlomiej Zolnierkiewicz
2004-05-05 12:14   ` Ross Dickson
2004-05-05 12:27     ` Ian Kumlien
2004-05-05 13:12       ` Ross Dickson
2004-05-05 13:23         ` Ian Kumlien
2004-05-05 12:58     ` Maciej W. Rozycki
2004-05-05 12:48   ` Patrick Dreker
2004-05-05 13:34     ` Patrick Dreker
2004-05-05 11:24 ` Ross Dickson
2004-05-05 12:18   ` Ian Kumlien
2004-05-05 12:52     ` Ross Dickson
2004-05-05 13:08       ` Ian Kumlien
2004-05-06  1:50         ` Jesse Allen
2004-05-03  8:08 Allen Martin
2004-04-23  1:30 Jesse Allen
2004-05-07  4:47 ` Richard James
2004-05-07  7:13   ` Craig Bradney
2004-05-08  5:33   ` Richard James
     [not found] <1KkKQ-2v9-9@gated-at.bofh.it>
     [not found] ` <1Kqdx-6E1-5@gated-at.bofh.it>
     [not found]   ` <1KH4I-3W9-11@gated-at.bofh.it>
     [not found]     ` <1LgOQ-7px-3@gated-at.bofh.it>
     [not found]       ` <1LlEY-36q-11@gated-at.bofh.it>
2004-04-15 23:07         ` Andi Kleen
2004-04-21 22:00           ` Len Brown
2004-04-13  1:17 IO-APIC on nforce2 Ross Dickson
2004-04-13  7:03 ` Ross Dickson
2004-04-14  1:02   ` IO-APIC on nforce2 [PATCH] Len Brown
2004-04-15 15:10     ` IO-APIC on nforce2 [PATCH] + [PATCH] for nmi_debug=1 + [PATCH] for idle=C1halt, 2.6.5 Ross Dickson
2004-04-15 20:17       ` Len Brown
2004-04-15 21:04         ` Craig Bradney
2004-04-21 20:22           ` Len Brown
2004-04-21 20:33             ` Ian Kumlien
2004-04-21 20:45             ` Craig Bradney
2004-04-21 21:28             ` Prakash K. Cheemplavam
2004-04-21 22:41               ` Len Brown
2004-04-22  7:26                 ` Prakash K. Cheemplavam
2004-04-22 14:58                   ` Len Brown
2004-04-22  8:45                 ` Craig Bradney
2004-04-22 15:03                   ` Len Brown
2004-04-22 20:50                     ` Craig Bradney
2004-04-22  8:50                 ` Arjen Verweij
2004-04-22 16:39                 ` Jesse Allen
2004-04-22 17:21                   ` Len Brown
2004-04-22 21:29                     ` Len Brown
2004-04-23  8:48                       ` Prakash K. Cheemplavam
2004-04-23  9:01                         ` Arjen Verweij
2004-04-23  9:08                           ` Prakash K. Cheemplavam
2004-04-23  9:11                           ` Prakash K. Cheemplavam
2004-04-23 12:18                       ` Maciej W. Rozycki
2004-04-26 11:41                     ` Ross Dickson
2004-04-27 17:02                       ` Arjen Verweij
2004-04-27 17:35                         ` Ian Kumlien
2004-04-27 18:00                         ` Len Brown
2004-04-27 18:24                           ` Arjen Verweij
2004-04-27 18:51                           ` Jussi Laako
2004-04-28 11:33                           ` Ross Dickson
2004-04-28 20:59                             ` Jesse Allen
2004-04-29 11:44                               ` Ross Dickson
2004-04-29 11:54                                 ` Maciej W. Rozycki
2004-04-29 12:00                                   ` Jamie Lokier
2004-04-29 12:26                                     ` Maciej W. Rozycki
2004-04-29 11:57                                 ` Jamie Lokier
2004-04-29 12:16                                 ` Craig Bradney
2004-04-29 20:24                                 ` Jesse Allen
2004-04-29 20:31                                   ` Prakash K. Cheemplavam
2004-05-03 20:45                                     ` Jesse Allen
2004-05-17 15:26                                       ` Prakash K. Cheemplavam
2004-05-17 19:32                                         ` Craig Bradney
2004-05-17 19:37                                           ` Prakash K. Cheemplavam
2004-05-17 19:57                                             ` Craig Bradney
2004-04-27 21:31                       ` Prakash K. Cheemplavam
2004-04-28 11:26                         ` Prakash K. Cheemplavam
2004-05-01  6:51                 ` Prakash K. Cheemplavam
2004-04-15 21:56         ` Arjen Verweij

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20040504203840.GA2102@tesore.local \
    --to=the3dfxdude@hotmail.com \
    --cc=linux-kernel@vger.kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.