From: "Prakash K. Cheemplavam" <PrakashKC@gmx.de>
To: Jesse Allen <the3dfxdude@hotmail.com>
Cc: Ross Dickson <ross@datscreative.com.au>,
Len Brown <len.brown@intel.com>,
a.verweij@student.tudelft.nl, Craig Bradney <cbradney@zip.com.au>,
christian.kroener@tu-harburg.de, linux-kernel@vger.kernel.org,
"Maciej W. Rozycki" <macro@ds2.pg.gda.pl>,
Jamie Lokier <jamie@shareable.org>,
Daniel Drake <dan@reactivated.net>, Ian Kumlien <pomac@vapor.com>,
Allen Martin <AMartin@nvidia.com>
Subject: Re: IO-APIC on nforce2 [PATCH] + [PATCH] for nmi_debug=1 + [PATCH] for idle=C1halt, 2.6.5
Date: Mon, 17 May 2004 17:26:58 +0200 [thread overview]
Message-ID: <40A8D9C2.7070608@gmx.de> (raw)
In-Reply-To: <20040503204520.GA1994@tesore.local>
Hi all,
I just made an interesting finding and would like to have comments from
NVidia:
Chip Current Value New Value
C17 1F0FFF01 1F01FF01
C18D 9F0FFF01 9F01FF01
In fact I have the newer chip revision (lspci says c1), but due to a
post at Abit Forums I tried to use the value for the older revision on
my board, and guess what: I never had such low idle temps! I am
currently even using nvidia binary graphics driver and usually I would
be having around 49-51°C idle temp, but now it is around 45°C, and it
was not the first boot (then the mobo usually shows 5°C less). Instead
the temp steadily fell from >50°C to 45°C.
(esp @nvidia:) Is there anything evil using the old chip's value for the
new chip? So far I haven't noticed any bad thing about it. Perhaps some
daring nforce2 user with the new revision should try as well.
bye,
Prakash
next prev parent reply other threads:[~2004-05-17 15:28 UTC|newest]
Thread overview: 93+ messages / expand[flat|nested] mbox.gz Atom feed top
2004-04-13 1:17 IO-APIC on nforce2 Ross Dickson
2004-04-13 4:01 ` really bensoo_at_soo_dot_com
2004-04-13 4:55 ` Ross Dickson
2004-04-13 17:22 ` Christian Kröner
2004-04-13 21:18 ` really bensoo_at_soo_dot_com
2004-04-14 4:24 ` really bensoo_at_soo_dot_com
2004-04-13 5:08 ` Len Brown
2004-04-13 7:03 ` Ross Dickson
2004-04-13 13:46 ` Maciej W. Rozycki
2004-04-14 1:02 ` IO-APIC on nforce2 [PATCH] Len Brown
2004-04-14 5:02 ` Ross Dickson
2004-04-14 6:30 ` Jamie Lokier
2004-04-14 10:37 ` Maciej W. Rozycki
2004-04-15 19:28 ` Len Brown
2004-04-14 19:57 ` Christian Kröner
2004-04-15 0:17 ` Len Brown
2004-04-15 1:48 ` Ross Dickson
2004-04-15 17:09 ` Christian Kröner
2004-04-15 15:10 ` IO-APIC on nforce2 [PATCH] + [PATCH] for nmi_debug=1 + [PATCH] for idle=C1halt, 2.6.5 Ross Dickson
2004-04-15 20:17 ` Len Brown
2004-04-15 21:04 ` Craig Bradney
2004-04-21 20:22 ` Len Brown
2004-04-21 20:33 ` Ian Kumlien
2004-04-21 20:45 ` Craig Bradney
2004-04-21 21:28 ` Prakash K. Cheemplavam
2004-04-21 22:41 ` Len Brown
2004-04-22 7:26 ` Prakash K. Cheemplavam
2004-04-22 14:58 ` Len Brown
2004-04-22 8:45 ` Craig Bradney
2004-04-22 15:03 ` Len Brown
2004-04-22 20:50 ` Craig Bradney
2004-04-22 8:50 ` Arjen Verweij
2004-04-22 16:39 ` Jesse Allen
2004-04-22 17:21 ` Len Brown
2004-04-22 21:29 ` Len Brown
2004-04-23 8:48 ` Prakash K. Cheemplavam
2004-04-23 9:01 ` Arjen Verweij
2004-04-23 9:08 ` Prakash K. Cheemplavam
2004-04-23 9:11 ` Prakash K. Cheemplavam
2004-04-23 12:18 ` Maciej W. Rozycki
2004-04-27 7:57 ` ACPI broken on nforce2? Prakash K. Cheemplavam
2004-04-26 11:41 ` IO-APIC on nforce2 [PATCH] + [PATCH] for nmi_debug=1 + [PATCH] for idle=C1halt, 2.6.5 Ross Dickson
2004-04-27 17:02 ` Arjen Verweij
2004-04-27 17:35 ` Ian Kumlien
2004-04-27 18:00 ` Len Brown
2004-04-27 18:24 ` Arjen Verweij
2004-04-27 18:51 ` Jussi Laako
2004-04-28 11:33 ` Ross Dickson
2004-04-28 20:59 ` Jesse Allen
2004-04-29 11:44 ` Ross Dickson
2004-04-29 11:54 ` Maciej W. Rozycki
2004-04-29 12:00 ` Jamie Lokier
2004-04-29 12:26 ` Maciej W. Rozycki
2004-04-29 11:57 ` Jamie Lokier
2004-04-29 12:16 ` Craig Bradney
2004-04-29 20:24 ` Jesse Allen
2004-04-29 20:31 ` Prakash K. Cheemplavam
2004-05-03 20:45 ` Jesse Allen
2004-05-17 15:26 ` Prakash K. Cheemplavam [this message]
2004-05-17 19:32 ` Craig Bradney
2004-05-17 19:37 ` Prakash K. Cheemplavam
2004-05-17 19:57 ` Craig Bradney
2004-04-27 21:31 ` Prakash K. Cheemplavam
2004-04-28 11:26 ` Prakash K. Cheemplavam
2004-05-01 6:51 ` Prakash K. Cheemplavam
2004-04-15 21:56 ` Arjen Verweij
2004-04-15 15:21 ` IO-APIC on nforce2 [PATCH] Zwane Mwaikambo
[not found] <1KkKQ-2v9-9@gated-at.bofh.it>
[not found] ` <1Kqdx-6E1-5@gated-at.bofh.it>
[not found] ` <1KH4I-3W9-11@gated-at.bofh.it>
[not found] ` <1LgOQ-7px-3@gated-at.bofh.it>
[not found] ` <1LlEY-36q-11@gated-at.bofh.it>
2004-04-15 23:07 ` IO-APIC on nforce2 [PATCH] + [PATCH] for nmi_debug=1 + [PATCH] for idle=C1halt, 2.6.5 Andi Kleen
2004-04-21 22:00 ` Len Brown
-- strict thread matches above, loose matches on Subject: below --
2004-04-23 1:30 Jesse Allen
2004-05-07 4:47 ` Richard James
2004-05-07 7:13 ` Craig Bradney
2004-05-08 5:33 ` Richard James
2004-05-03 8:08 Allen Martin
2004-05-03 22:09 Allen Martin
2004-05-03 23:11 ` Bartlomiej Zolnierkiewicz
2004-05-04 8:28 ` Prakash K. Cheemplavam
2004-05-04 21:10 ` Jeff Garzik
2004-05-04 21:29 ` Bartlomiej Zolnierkiewicz
2004-05-05 12:14 ` Ross Dickson
2004-05-05 12:27 ` Ian Kumlien
2004-05-05 13:12 ` Ross Dickson
2004-05-05 13:23 ` Ian Kumlien
2004-05-05 12:58 ` Maciej W. Rozycki
2004-05-05 12:48 ` Patrick Dreker
2004-05-05 13:34 ` Patrick Dreker
2004-05-05 11:24 ` Ross Dickson
2004-05-05 12:18 ` Ian Kumlien
2004-05-05 12:52 ` Ross Dickson
2004-05-05 13:08 ` Ian Kumlien
2004-05-06 1:50 ` Jesse Allen
2004-05-04 20:38 Jesse Allen
2004-05-04 21:14 ` Craig Bradney
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=40A8D9C2.7070608@gmx.de \
--to=prakashkc@gmx.de \
--cc=AMartin@nvidia.com \
--cc=a.verweij@student.tudelft.nl \
--cc=cbradney@zip.com.au \
--cc=christian.kroener@tu-harburg.de \
--cc=dan@reactivated.net \
--cc=jamie@shareable.org \
--cc=len.brown@intel.com \
--cc=linux-kernel@vger.kernel.org \
--cc=macro@ds2.pg.gda.pl \
--cc=pomac@vapor.com \
--cc=ross@datscreative.com.au \
--cc=the3dfxdude@hotmail.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.