From: Stuart Young <cef-lkml@optusnet.com.au>
To: linux-kernel@vger.kernel.org
Cc: Jeff Garzik <jgarzik@pobox.com>,
"Eric D. Mudama" <edmudama@mail.bounceswoosh.org>,
Jens Axboe <axboe@suse.de>,
Bartlomiej Zolnierkiewicz <B.Zolnierkiewicz@elka.pw.edu.pl>,
Ed Tomlinson <edt@aei.ca>, Andrew Morton <akpm@osdl.org>
Subject: Re: flush cache range proposal (was Re: ide errors in 7-rc1-mm1 and later)
Date: Fri, 11 Jun 2004 16:10:34 +1000 [thread overview]
Message-ID: <200406111610.34649.cef-lkml@optusnet.com.au> (raw)
In-Reply-To: <40C89F4D.4070500@pobox.com>
On Fri, 11 Jun 2004 03:50, Jeff Garzik wrote:
> 2) IDENTIFY DEVICE, Word 207, Command set/feature enabled
>
> bit 15: shall be cleared to zero
> bit 14: shall be set to one
> bits 13:1: reserved
> bits 0: 1 == flush cache (range) enabled
>
> Word 206:
>
> If bit 0 is set to one, the mandatory FLUSH CACHE and FLUSH CACHE EXT
> commands (if implemented) support the RANGE bit, and user-supplied LBA
> and sector count specifying the limits of the cache flush.
Shouldn't that be "Word 207:" up there?
--
Stuart Young (aka Cef)
cef-lkml@optusnet.com.au is for LKML and related email only
next prev parent reply other threads:[~2004-06-11 6:09 UTC|newest]
Thread overview: 66+ messages / expand[flat|nested] mbox.gz Atom feed top
2004-05-27 20:24 [2.6.7-rc1-mm1] cant mount reiserfs using -o barrier=flush Günther Persoons
2004-05-27 23:28 ` Ed Tomlinson
2004-05-28 11:54 ` Gunther Persoons
2004-05-28 12:18 ` Jens Axboe
2004-05-28 21:39 ` Ed Tomlinson
2004-05-29 8:30 ` Jens Axboe
2004-06-04 2:07 ` ide errors in 7-rc1-mm1 and later Ed Tomlinson
2004-06-04 2:31 ` Andrew Morton
2004-06-04 9:42 ` Jens Axboe
2004-06-04 11:22 ` Ed Tomlinson
2004-06-04 11:32 ` Jens Axboe
2004-06-04 11:45 ` Jens Axboe
2004-06-04 11:57 ` Bartlomiej Zolnierkiewicz
2004-06-04 12:01 ` Jens Axboe
2004-06-04 12:38 ` Bartlomiej Zolnierkiewicz
2004-06-04 12:47 ` Jens Axboe
2004-06-04 13:34 ` Bartlomiej Zolnierkiewicz
2004-06-04 15:23 ` Jens Axboe
2004-06-04 16:14 ` Bartlomiej Zolnierkiewicz
2004-06-05 9:18 ` Jens Axboe
2004-06-09 21:52 ` Bartlomiej Zolnierkiewicz
2004-06-09 22:06 ` Andrew Morton
2004-06-09 23:38 ` Bartlomiej Zolnierkiewicz
2004-06-09 23:50 ` Andrew Morton
2004-06-10 0:20 ` Bartlomiej Zolnierkiewicz
2004-06-10 0:37 ` Andrew Morton
2004-06-10 1:02 ` Bartlomiej Zolnierkiewicz
2004-06-10 0:28 ` Chris Mason
2004-06-10 0:38 ` Andrew Morton
2004-06-10 0:45 ` Bartlomiej Zolnierkiewicz
2004-06-10 15:14 ` Chris Mason
2004-06-10 15:15 ` Jens Axboe
2004-06-10 1:05 ` Bartlomiej Zolnierkiewicz
2004-06-10 6:27 ` Jens Axboe
2004-06-10 6:26 ` Jens Axboe
2004-06-04 17:29 ` Jeff Garzik
2004-06-05 9:24 ` Jens Axboe
2004-06-06 16:18 ` Eric D. Mudama
2004-06-06 20:46 ` Jens Axboe
2004-06-10 0:38 ` Bartlomiej Zolnierkiewicz
2004-06-10 6:11 ` Jens Axboe
2004-06-10 16:41 ` Eric D. Mudama
2004-06-10 17:50 ` flush cache range proposal (was Re: ide errors in 7-rc1-mm1 and later) Jeff Garzik
2004-06-10 18:02 ` Jeff Garzik
2004-06-10 20:33 ` Eric D. Mudama
2004-06-11 16:22 ` Jeff Garzik
2004-06-11 7:55 ` Jens Axboe
2004-06-11 16:17 ` Eric D. Mudama
2004-06-11 16:31 ` Jeff Garzik
2004-06-11 16:52 ` Eric D. Mudama
2004-06-11 16:58 ` Jens Axboe
2004-06-11 16:54 ` Jens Axboe
2004-06-11 16:50 ` Jens Axboe
2004-06-11 16:24 ` Jeff Garzik
2004-06-11 6:10 ` Stuart Young [this message]
2004-06-26 8:31 ` ide errors in 7-rc1-mm1 and later Andre Hedrick
2004-06-26 8:58 ` Andre Hedrick
2004-06-28 18:18 ` Eric D. Mudama
2004-07-02 8:29 ` Jens Axboe
2004-07-07 5:40 ` Jeff Garzik
2004-06-04 11:48 ` Bartlomiej Zolnierkiewicz
2004-06-09 23:44 ` Ed Tomlinson
2004-06-09 23:52 ` Andrew Morton
2004-06-10 0:17 ` Ed Tomlinson
2004-06-10 6:29 ` Jens Axboe
2004-06-14 21:42 ` Ed Tomlinson
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=200406111610.34649.cef-lkml@optusnet.com.au \
--to=cef-lkml@optusnet.com.au \
--cc=B.Zolnierkiewicz@elka.pw.edu.pl \
--cc=akpm@osdl.org \
--cc=axboe@suse.de \
--cc=edmudama@mail.bounceswoosh.org \
--cc=edt@aei.ca \
--cc=jgarzik@pobox.com \
--cc=linux-kernel@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.