[2.6.8.1-mm1][input] - IBM TouchPad support added? Which patch is this?

[2.6.8.1-mm1][input] - IBM TouchPad support added? Which patch is this?

[Shawn Starr]

 mice: PS/2 mouse device common for all mice
input: IBM PC110 TouchPad at 0x15e0 irq 10 <----------------------------- This is new
input: AT Translated Set 2 keyboard on isa0060/serio0
Synaptics Touchpad, model: 1
Firmware: 5.9
Sensor: 44
new absolute packet format
Touchpad has extended capability bits
  -> multifinger detection
  -> palm detection
  -> pass-through port
 input: SynPS/2 Synaptics TouchPad on isa0060/serio1
 serio: Synaptics pass-through port atisa0060/serio1/input0

Which patch is this? its nice but I don't see any ability (yet) to control its sensitivity (especially in KDE!). Upon using 2.6.8-rc4-bk2 there was no such device (you could not touch the pad as a button).

Shawn.

Re: [2.6.8.1-mm1][input] - IBM TouchPad support added? Which patch is this? - Found it ignore

[Shawn Starr]

On August 17, 2004 03:49, Shawn Starr wrote:
>  mice: PS/2 mouse device common for all mice
> input: IBM PC110 TouchPad at 0x15e0 irq 10 <-----------------------------
> This is new input: AT Translated Set 2 keyboard on isa0060/serio0
> Synaptics Touchpad, model: 1
> Firmware: 5.9
> Sensor: 44
> new absolute packet format
> Touchpad has extended capability bits
>   -> multifinger detection
>   -> palm detection
>   -> pass-through port
>  input: SynPS/2 Synaptics TouchPad on isa0060/serio1
>  serio: Synaptics pass-through port atisa0060/serio1/input0
>
> Which patch is this? its nice but I don't see any ability (yet) to control
> its sensitivity (especially in KDE!). Upon using 2.6.8-rc4-bk2 there was no
> such device (you could not touch the pad as a button).
>
> Shawn.


  new device driver to enable the IBM Multiport Serial Adapter

I found it, its  a serial device.

Shawn.

[2.6.8.1-mm1][input] - IBM TouchPad support added? Which patch is this? - Unsure still

[Shawn Starr]

Sorry, I stand corrected. I don't know where this patch is added from which 
enables the touchpad to act as a 'button press'.

Shawn.

On August 17, 2004 03:49, Shawn Starr wrote:
>  mice: PS/2 mouse device common for all mice
> input: IBM PC110 TouchPad at 0x15e0 irq 10 <-----------------------------
> This is new input: AT Translated Set 2 keyboard on isa0060/serio0
> Synaptics Touchpad, model: 1
> Firmware: 5.9
> Sensor: 44
> new absolute packet format
> Touchpad has extended capability bits
>   -> multifinger detection
>   -> palm detection
>   -> pass-through port
>  input: SynPS/2 Synaptics TouchPad on isa0060/serio1
>  serio: Synaptics pass-through port atisa0060/serio1/input0
>
> Which patch is this? its nice but I don't see any ability (yet) to control
> its sensitivity (especially in KDE!). Upon using 2.6.8-rc4-bk2 there was no
> such device (you could not touch the pad as a button).
>
> Shawn.

Re: [2.6.8.1-mm1][input] - IBM TouchPad support added? Which patch is this? - Unsure still

[Dmitry Torokhov]

On Tuesday 17 August 2004 03:02 am, Shawn Starr wrote:
> Sorry, I stand corrected. I don't know where this patch is added from which 
> enables the touchpad to act as a 'button press'.
>

mousedev now does tap emulation for touchpads working in absolute mode
(Synaptics) so you don't need to use psmouse.proto= parameter to force
it in PS/2 compatibility mode. Use mousedev.tap_time= option to control
it.

The patch is only in -mm at the moment.

-- 
Dmitry

Re: [2.6.8.1-mm1][input] - IBM TouchPad support added? Which patch is this? - Unsure still

[Alan Cox]

On Maw, 2004-08-17 at 09:02, Shawn Starr wrote:
> >  mice: PS/2 mouse device common for all mice
> > input: IBM PC110 TouchPad at 0x15e0 irq 10 <-----------------------------
> > This is new input: AT Translated Set 2 keyboard on isa0060/serio0

You enabled the IBM PC110 driver. Thats a driver for a specifc touchpad
device on IBM PC110 palmtop pcs - nothing to do with it 8)

Re: [2.6.8.1-mm1][input] - IBM TouchPad support added? Which patch is this? - Unsure still

[Shawn Starr]

Great, it works

On top of that the X driver for the Synaptics device along with qsynaptics (a 
userland GUI tool) all works fine.

Good stuff!

Shawn.

On August 17, 2004 09:01, Dmitry Torokhov wrote:
> On Tuesday 17 August 2004 03:02 am, Shawn Starr wrote:
> > Sorry, I stand corrected. I don't know where this patch is added from
> > which enables the touchpad to act as a 'button press'.
>
> mousedev now does tap emulation for touchpads working in absolute mode
> (Synaptics) so you don't need to use psmouse.proto= parameter to force
> it in PS/2 compatibility mode. Use mousedev.tap_time= option to control
> it.
>
> The patch is only in -mm at the moment.

Re: [2.6.8.1-mm1][input] - IBM TouchPad support added? Which patch is this? - Unsure still

[Frank Steiner]

Dmitry Torokhov wrote:
> On Tuesday 17 August 2004 03:02 am, Shawn Starr wrote:
> 
>>Sorry, I stand corrected. I don't know where this patch is added from which 
>>enables the touchpad to act as a 'button press'.
>>
> 
> 
> mousedev now does tap emulation for touchpads working in absolute mode
> (Synaptics) so you don't need to use psmouse.proto= parameter to force
> it in PS/2 compatibility mode. Use mousedev.tap_time= option to control
> it.
> 
> The patch is only in -mm at the moment.

Can that patch be downloaded somewhere to patch against 2.6.8.1? I don't
have any tapping support for my synaptic touchpad on my compaq laptop after
switching from 2.4 to 2.6.
It seems that most of the patches at http://www.geocities.com/dt_or/input/2_6_7/
are already in 2.6.8.1: Just the tapping stuff seems to be missing. And
I can't extract your patch from the 2.6.9-rc1-mm2 stuff, because it seems
to be mixed with some other patches there.
Is there a sole version of this patch fir 2.6.8.1 somewhere?

cu,
Frank


-- 
Dipl.-Inform. Frank Steiner   Web:  http://www.bio.ifi.lmu.de/~steiner/
Lehrstuhl f. Bioinformatik    Mail: http://www.bio.ifi.lmu.de/~steiner/m/
LMU, Amalienstr. 17           Phone: +49 89 2180-4049
80333 Muenchen, Germany       Fax:   +49 89 2180-99-4049

Re: [2.6.8.1-mm1][input] - IBM TouchPad support added? Which patch is this? - Unsure still

[Dmitry Torokhov]

On Friday 03 September 2004 02:12 am, Frank Steiner wrote:
> Dmitry Torokhov wrote:
> > On Tuesday 17 August 2004 03:02 am, Shawn Starr wrote:
> > 
> >>Sorry, I stand corrected. I don't know where this patch is added from which 
> >>enables the touchpad to act as a 'button press'.
> >>
> > 
> > 
> > mousedev now does tap emulation for touchpads working in absolute mode
> > (Synaptics) so you don't need to use psmouse.proto= parameter to force
> > it in PS/2 compatibility mode. Use mousedev.tap_time= option to control
> > it.
> > 
> > The patch is only in -mm at the moment.
> 
> Can that patch be downloaded somewhere to patch against 2.6.8.1? I don't
> have any tapping support for my synaptic touchpad on my compaq laptop after
> switching from 2.4 to 2.6.
> It seems that most of the patches at http://www.geocities.com/dt_or/input/2_6_7/
> are already in 2.6.8.1: Just the tapping stuff seems to be missing. And
> I can't extract your patch from the 2.6.9-rc1-mm2 stuff, because it seems
> to be mixed with some other patches there.
> Is there a sole version of this patch fir 2.6.8.1 somewhere?
> 

No, I don't think I have one... If you are using BitKeeper, yo could just do:

	bk pull bk://dtor.bkbits.net/input

But have you tried installing XFree86/XOrg Synaptics driver
(http://w1.894.telia.com/~u89404340/touchpad/index.html)?
It does support tapping just fine...

-- 
Dmitry

Re: [2.6.8.1-mm1][input] - IBM TouchPad support added? Which patch is this? - Unsure still

[Frank Steiner]

Dmitry Torokhov wrote:

> No, I don't think I have one... If you are using BitKeeper, yo could just do:
> 
> 	bk pull bk://dtor.bkbits.net/input

I will try that (not having bitkeeper yet, but I planned to do install for
some time... You always need a reason to be pushed :-))

> 
> But have you tried installing XFree86/XOrg Synaptics driver
> (http://w1.894.telia.com/~u89404340/touchpad/index.html)?
> It does support tapping just fine...

I will try. I had already looked at the page, but it says "If you use a
2.6 linux kernel, you might want to try Dmitry Torokhov's kernel patches."
so that's looked at your patches first :-)

I will try both your proposals and report sucess.
Thanks!

cu,
Frank

-- 
Dipl.-Inform. Frank Steiner   Web:  http://www.bio.ifi.lmu.de/~steiner/
Lehrstuhl f. Bioinformatik    Mail: http://www.bio.ifi.lmu.de/~steiner/m/
LMU, Amalienstr. 17           Phone: +49 89 2180-4049
80333 Muenchen, Germany       Fax:   +49 89 2180-99-4049

Re: [2.6.8.1-mm1][input] - IBM TouchPad support added? Which patch is this? - Unsure still

[Frank Steiner]

Frank Steiner wrote:

>> But have you tried installing XFree86/XOrg Synaptics driver
>> (http://w1.894.telia.com/~u89404340/touchpad/index.html)?
>> It does support tapping just fine...

Yes, that works, as well as the gpm version I have (I just had to
detect the evdev option :-)).

And I also had success with the psmouse.proto=bare option which I just
checked to see if it works...

cu,
Frank

-- 
Dipl.-Inform. Frank Steiner   Web:  http://www.bio.ifi.lmu.de/~steiner/
Lehrstuhl f. Bioinformatik    Mail: http://www.bio.ifi.lmu.de/~steiner/m/
LMU, Amalienstr. 17           Phone: +49 89 2180-4049
80333 Muenchen, Germany       Fax:   +49 89 2180-99-4049
* Rekursion kann man erst verstehen, wenn man Rekursion verstanden hat. *

[INPUT] mousedev touchpad functionality additions for inclusion into 2.6.9?

[Shawn Starr]

Any change of this going into mainline? I'm using this with 2.6.9-rc2-bk2 with 
no issues.

Shawn.

On August 17, 2004 09:01, Dmitry Torokhov wrote:
> On Tuesday 17 August 2004 03:02 am, Shawn Starr wrote:
> > Sorry, I stand corrected. I don't know where this patch is added from
> > which enables the touchpad to act as a 'button press'.
>
> mousedev now does tap emulation for touchpads working in absolute mode
> (Synaptics) so you don't need to use psmouse.proto= parameter to force
> it in PS/2 compatibility mode. Use mousedev.tap_time= option to control
> it.
>
> The patch is only in -mm at the moment.

Re: [INPUT] mousedev touchpad functionality additions for inclusion into 2.6.9?

[Dmitry Torokhov]

On Thursday 16 September 2004 08:49 pm, Shawn Starr wrote:
> Any change of this going into mainline? I'm using this with 2.6.9-rc2-bk2 with 
> no issues.
>

It has just been merged.

-- 
Dmitry