From: jthiessen@penguincomputing.com (Justin Thiessen)
To: lm-sensors@vger.kernel.org
Subject: [PATCH] 2.6 lm85.c driver update
Date: Thu, 19 May 2005 06:25:18 +0000 [thread overview]
Message-ID: <20041004200943.GE22290@penguincomputing.com> (raw)
Hi,
Here is a patch to restore fan control to the lm85 driver in the 2.6.X kernel.
It will be followed by a patch to libsensors (chips.c and chips.h) which
adjusts entries for the lm85 and compatibles (adm1027) accordingly.
Changes to lm85.c:
It adheres as best as possible to the 3rd fan control interface proposal,
using interface names like:
tempN_auto_temp_[off|min|max|crit]
pwmN_auto_pwm_[min|freq|minctl]
pwmN_auto_channels
Obviously a bit of translation is needed to fit the:
Off --> Min --> Max --> Crit
model to the native lm85
Min/Hyst/Range/Crit model, particularly as the Range is a set of discrete,
non-uniformly-spaced temperature values.
Because of the difference in models, every time tempN_auto_temp_min is
adjusted, tempN_auto_temp_off and tempN_auto_temp_max must be recalculated,
and new values assigned to Hyst and Range. Otherwise tempN_auto_temp_off and
tempN_auto_temp_max would change in an unanticipated (to the user) manner,
shifting up or down with corresponding changes in tempN_auto_temp_min.
The code therefore maintains state in tempN_auto_temp_off_desired and
tempN_auto_temp_max_desired, using these values to recalculate
tempN_auto_temp_off and tempN_auto_temp_max whenever tempN_auto_temp_min varies.
The adjusted "RANGE_TO_REG" function now finds the closest available match
rather than simply picking the smallest value bigger than that requested.
The last entry in lm85_range_map has been changed from 980 to 940 to match
the value listed in the lm85 datasheet.
I have changed the externally-visible magnitudes of the temperatures from .1C
to .001C, in accordance with current interface standards.
I would appreciate any feedback people can provide.
Thanks.
Sincerely,
Justin Thiessen
jthiessen@penguincomputing.com
http://www.penguincomputing.com
Signed-off-by: Justin Thiessen <jthiessen@penguincomputing.com>
===============================
--- linux/drivers/i2c/chips/lm85.c.orig 2004-09-17 13:32:05.000000000 -0700
+++ linux/drivers/i2c/chips/lm85.c 2004-10-04 11:04:03.137827256 -0700
@@ -4,6 +4,7 @@
Copyright (c) 1998, 1999 Frodo Looijaard <frodol@dds.nl>
Copyright (c) 2002, 2003 Philip Pokorny <ppokorny@penguincomputing.com>
Copyright (c) 2003 Margit Schubert-While <margitsw@t-online.de>
+ Copyright (c) 2004 Justin Thiessen <jthiessen@penguincomputing.com>
Chip details at <http://www.national.com/ds/LM/LM85.pdf>
@@ -29,11 +30,6 @@
#include <linux/i2c.h>
#include <linux/i2c-sensor.h>
#include <linux/i2c-vid.h>
-/*
-#include <asm/io.h>
-*/
-
-#undef LM85EXTENDEDFUNC /* Extended functionality */
/* Addresses to scan */
static unsigned short normal_i2c[] = { 0x2c, 0x2d, 0x2e, I2C_CLIENT_END };
@@ -163,8 +159,6 @@ static int lm85_scaling[] = { /* .001 V
#define EXT_FROM_REG(val,sensor) (((val)>>(sensor * 2))&0x03)
-#ifdef LM85EXTENDEDFUNC /* Extended functionality */
-
/* ZONEs have the following parameters:
* Limit (low) temp, 1. degC
* Hysteresis (below limit), 1. degC (0-15)
@@ -183,20 +177,32 @@ static int lm85_scaling[] = { /* .001 V
* Filter constant (or disabled) .1 seconds
*/
-/* These are the zone temperature range encodings */
-static int lm85_range_map[] = { /* .1 degC */
- 20, 25, 33, 40, 50, 66,
- 80, 100, 133, 160, 200, 266,
- 320, 400, 533, 800
+/* These are the zone temperature range encodings in .001 degree C */
+static int lm85_range_map[] = {
+ 2000, 2500, 3300, 4000, 5000, 6600,
+ 8000, 10000, 13300, 16000, 20000, 26600,
+ 32000, 40000, 53300, 80000
};
static int RANGE_TO_REG( int range )
{
int i;
- if( range >= lm85_range_map[15] ) { return 15 ; }
- for( i = 0 ; i < 15 ; ++i )
- if( range <= lm85_range_map[i] )
- break ;
+ if ( range < lm85_range_map[0] ) {
+ return 0 ;
+ } else if ( range > lm85_range_map[15] ) {
+ return 15 ;
+ } else { /* find closest match */
+ for ( i = 14 ; i >= 0 ; --i ) {
+ if ( range > lm85_range_map[i] ) { /* range bracketed */
+ if ((lm85_range_map[i+1] - range) <
+ (range - lm85_range_map[i])) {
+ i++;
+ break;
+ }
+ break;
+ }
+ }
+ }
return( i & 0x0f );
}
#define RANGE_FROM_REG(val) (lm85_range_map[(val)&0x0f])
@@ -240,7 +246,7 @@ static int SPINUP_TO_REG( int spinup )
/* These are the PWM frequency encodings */
static int lm85_freq_map[] = { /* .1 Hz */
- 100, 150, 230, 300, 380, 470, 620, 980
+ 100, 150, 230, 300, 380, 470, 620, 940
};
static int FREQ_TO_REG( int freq )
{
@@ -266,13 +272,9 @@ static int FREQ_TO_REG( int freq )
* -2 -- PWM responds to manual control
*/
-#endif /* Extended functionality */
-
static int lm85_zone_map[] = { 1, 2, 3, -1, 0, 23, 123, -2 };
#define ZONE_FROM_REG(val) (lm85_zone_map[((val)>>5)&0x07])
-#ifdef LM85EXTENDEDFUNC /* Extended functionality */
-
static int ZONE_TO_REG( int zone )
{
int i;
@@ -285,10 +287,8 @@ static int ZONE_TO_REG( int zone )
return( (i & 0x07)<<5 );
}
-#endif /* Extended functionality */
-
-#define HYST_TO_REG(val) (SENSORS_LIMIT((-(val)+5)/10,0,15))
-#define HYST_FROM_REG(val) (-(val)*10)
+#define HYST_TO_REG(val) (SENSORS_LIMIT(((val)+500)/1000,0,15))
+#define HYST_FROM_REG(val) ((val)*1000)
#define OFFSET_TO_REG(val) (SENSORS_LIMIT((val)/25,-127,127))
#define OFFSET_FROM_REG(val) ((val)*25)
@@ -341,6 +341,14 @@ struct lm85_zone {
u8 hyst; /* Low limit hysteresis. (0-15) */
u8 range; /* Temp range, encoded */
s8 critical; /* "All fans ON" temp limit */
+ u8 off_desired; /* Actual "off" temperature specified. Preserved
+ * to prevent "drift" as other autofan control
+ * values change.
+ */
+ u8 max_desired; /* Actual "max" temperature specified. Preserved
+ * to prevent "drift" as other autofan control
+ * values change.
+ */
};
struct lm85_autofan {
@@ -439,18 +447,19 @@ static ssize_t set_fan_min(struct device
#define show_fan_offset(offset) \
static ssize_t show_fan_##offset (struct device *dev, char *buf) \
{ \
- return show_fan(dev, buf, 0x##offset - 1); \
+ return show_fan(dev, buf, offset - 1); \
} \
static ssize_t show_fan_##offset##_min (struct device *dev, char *buf) \
{ \
- return show_fan_min(dev, buf, 0x##offset - 1); \
+ return show_fan_min(dev, buf, offset - 1); \
} \
static ssize_t set_fan_##offset##_min (struct device *dev, \
const char *buf, size_t count) \
{ \
- return set_fan_min(dev, buf, count, 0x##offset - 1); \
+ return set_fan_min(dev, buf, count, offset - 1); \
} \
-static DEVICE_ATTR(fan##offset##_input, S_IRUGO, show_fan_##offset, NULL) \
+static DEVICE_ATTR(fan##offset##_input, S_IRUGO, show_fan_##offset, \
+ NULL) \
static DEVICE_ATTR(fan##offset##_min, S_IRUGO | S_IWUSR, \
show_fan_##offset##_min, set_fan_##offset##_min)
@@ -529,20 +538,21 @@ static ssize_t show_pwm_enable(struct de
#define show_pwm_reg(offset) \
static ssize_t show_pwm_##offset (struct device *dev, char *buf) \
{ \
- return show_pwm(dev, buf, 0x##offset - 1); \
+ return show_pwm(dev, buf, offset - 1); \
} \
static ssize_t set_pwm_##offset (struct device *dev, \
const char *buf, size_t count) \
{ \
- return set_pwm(dev, buf, count, 0x##offset - 1); \
+ return set_pwm(dev, buf, count, offset - 1); \
} \
static ssize_t show_pwm_enable##offset (struct device *dev, char *buf) \
{ \
- return show_pwm_enable(dev, buf, 0x##offset - 1); \
+ return show_pwm_enable(dev, buf, offset - 1); \
} \
-static DEVICE_ATTR(fan##offset##_pwm, S_IRUGO | S_IWUSR, \
+static DEVICE_ATTR(fan##offset##_pwm, S_IRUGO | S_IWUSR, \
show_pwm_##offset, set_pwm_##offset) \
-static DEVICE_ATTR(fan##offset##_pwm_enable, S_IRUGO, show_pwm_enable##offset, NULL)
+static DEVICE_ATTR(fan##offset##_pwm_enable, S_IRUGO, \
+ show_pwm_enable##offset, NULL)
show_pwm_reg(1);
show_pwm_reg(2);
@@ -596,25 +606,25 @@ static ssize_t set_in_max(struct device
#define show_in_reg(offset) \
static ssize_t show_in_##offset (struct device *dev, char *buf) \
{ \
- return show_in(dev, buf, 0x##offset); \
+ return show_in(dev, buf, offset); \
} \
static ssize_t show_in_##offset##_min (struct device *dev, char *buf) \
{ \
- return show_in_min(dev, buf, 0x##offset); \
+ return show_in_min(dev, buf, offset); \
} \
static ssize_t show_in_##offset##_max (struct device *dev, char *buf) \
{ \
- return show_in_max(dev, buf, 0x##offset); \
+ return show_in_max(dev, buf, offset); \
} \
static ssize_t set_in_##offset##_min (struct device *dev, \
const char *buf, size_t count) \
{ \
- return set_in_min(dev, buf, count, 0x##offset); \
+ return set_in_min(dev, buf, count, offset); \
} \
static ssize_t set_in_##offset##_max (struct device *dev, \
const char *buf, size_t count) \
{ \
- return set_in_max(dev, buf, count, 0x##offset); \
+ return set_in_max(dev, buf, count, offset); \
} \
static DEVICE_ATTR(in##offset##_input, S_IRUGO, show_in_##offset, NULL) \
static DEVICE_ATTR(in##offset##_min, S_IRUGO | S_IWUSR, \
@@ -676,27 +686,28 @@ static ssize_t set_temp_max(struct devic
#define show_temp_reg(offset) \
static ssize_t show_temp_##offset (struct device *dev, char *buf) \
{ \
- return show_temp(dev, buf, 0x##offset - 1); \
+ return show_temp(dev, buf, offset - 1); \
} \
static ssize_t show_temp_##offset##_min (struct device *dev, char *buf) \
{ \
- return show_temp_min(dev, buf, 0x##offset - 1); \
+ return show_temp_min(dev, buf, offset - 1); \
} \
static ssize_t show_temp_##offset##_max (struct device *dev, char *buf) \
{ \
- return show_temp_max(dev, buf, 0x##offset - 1); \
+ return show_temp_max(dev, buf, offset - 1); \
} \
static ssize_t set_temp_##offset##_min (struct device *dev, \
const char *buf, size_t count) \
{ \
- return set_temp_min(dev, buf, count, 0x##offset - 1); \
+ return set_temp_min(dev, buf, count, offset - 1); \
} \
static ssize_t set_temp_##offset##_max (struct device *dev, \
const char *buf, size_t count) \
{ \
- return set_temp_max(dev, buf, count, 0x##offset - 1); \
+ return set_temp_max(dev, buf, count, offset - 1); \
} \
-static DEVICE_ATTR(temp##offset##_input, S_IRUGO, show_temp_##offset, NULL) \
+static DEVICE_ATTR(temp##offset##_input, S_IRUGO, show_temp_##offset, \
+ NULL) \
static DEVICE_ATTR(temp##offset##_min, S_IRUGO | S_IWUSR, \
show_temp_##offset##_min, set_temp_##offset##_min) \
static DEVICE_ATTR(temp##offset##_max, S_IRUGO | S_IWUSR, \
@@ -707,6 +718,330 @@ show_temp_reg(2);
show_temp_reg(3);
+/* Automatic PWM control */
+
+static ssize_t show_pwm_auto_channels(struct device *dev, char *buf, int nr)
+{
+ struct lm85_data *data = lm85_update_device(dev);
+ return sprintf(buf,"%d\n", ZONE_FROM_REG(data->autofan[nr].config));
+}
+static ssize_t set_pwm_auto_channels(struct device *dev, const char *buf,
+ size_t count, int nr)
+{
+ struct i2c_client *client = to_i2c_client(dev);
+ struct lm85_data *data = i2c_get_clientdata(client);
+ int val;
+
+ down(&data->update_lock);
+ val = simple_strtol(buf, NULL, 10);
+ data->autofan[nr].config = (data->autofan[nr].config & (~0xe0))
+ | ZONE_TO_REG(val) ;
+ lm85_write_value(client, LM85_REG_AFAN_CONFIG(nr),
+ data->autofan[nr].config);
+ up(&data->update_lock);
+ return count;
+}
+static ssize_t show_pwm_auto_pwm_min(struct device *dev, char *buf, int nr)
+{
+ struct lm85_data *data = lm85_update_device(dev);
+ return sprintf(buf,"%d\n", PWM_FROM_REG(data->autofan[nr].min_pwm));
+}
+static ssize_t set_pwm_auto_pwm_min(struct device *dev, const char *buf,
+ size_t count, int nr)
+{
+ struct i2c_client *client = to_i2c_client(dev);
+ struct lm85_data *data = i2c_get_clientdata(client);
+ int val;
+
+ down(&data->update_lock);
+ val = simple_strtol(buf, NULL, 10);
+ data->autofan[nr].min_pwm = PWM_TO_REG(val);
+ lm85_write_value(client, LM85_REG_AFAN_MINPWM(nr),
+ data->autofan[nr].min_pwm);
+ up(&data->update_lock);
+ return count;
+}
+static ssize_t show_pwm_auto_pwm_minctl(struct device *dev, char *buf, int nr)
+{
+ struct lm85_data *data = lm85_update_device(dev);
+ return sprintf(buf,"%d\n", data->autofan[nr].min_off);
+}
+static ssize_t set_pwm_auto_pwm_minctl(struct device *dev, const char *buf,
+ size_t count, int nr)
+{
+ struct i2c_client *client = to_i2c_client(dev);
+ struct lm85_data *data = i2c_get_clientdata(client);
+ int val;
+
+ down(&data->update_lock);
+ val = simple_strtol(buf, NULL, 10);
+ data->autofan[nr].min_off = val;
+ lm85_write_value(client, LM85_REG_AFAN_SPIKE1, data->smooth[0]
+ | data->syncpwm3
+ | (data->autofan[0].min_off ? 0x20 : 0)
+ | (data->autofan[1].min_off ? 0x40 : 0)
+ | (data->autofan[2].min_off ? 0x80 : 0)
+ );
+ up(&data->update_lock);
+ return count;
+}
+static ssize_t show_pwm_auto_pwm_freq(struct device *dev, char *buf, int nr)
+{
+ struct lm85_data *data = lm85_update_device(dev);
+ return sprintf(buf,"%d\n", FREQ_FROM_REG(data->autofan[nr].freq));
+}
+static ssize_t set_pwm_auto_pwm_freq(struct device *dev, const char *buf,
+ size_t count, int nr)
+{
+ struct i2c_client *client = to_i2c_client(dev);
+ struct lm85_data *data = i2c_get_clientdata(client);
+ int val;
+
+ down(&data->update_lock);
+ val = simple_strtol(buf, NULL, 10);
+ data->autofan[nr].freq = FREQ_TO_REG(val);
+ lm85_write_value(client, LM85_REG_AFAN_RANGE(nr),
+ (data->zone[nr].range << 4)
+ | data->autofan[nr].freq
+ );
+ up(&data->update_lock);
+ return count;
+}
+#define pwm_auto(offset) \
+static ssize_t show_pwm##offset##_auto_channels (struct device *dev, \
+ char *buf) \
+{ \
+ return show_pwm_auto_channels(dev, buf, offset - 1); \
+} \
+static ssize_t set_pwm##offset##_auto_channels (struct device *dev, \
+ const char *buf, size_t count) \
+{ \
+ return set_pwm_auto_channels(dev, buf, count, offset - 1); \
+} \
+static ssize_t show_pwm##offset##_auto_pwm_min (struct device *dev, \
+ char *buf) \
+{ \
+ return show_pwm_auto_pwm_min(dev, buf, offset - 1); \
+} \
+static ssize_t set_pwm##offset##_auto_pwm_min (struct device *dev, \
+ const char *buf, size_t count) \
+{ \
+ return set_pwm_auto_pwm_min(dev, buf, count, offset - 1); \
+} \
+static ssize_t show_pwm##offset##_auto_pwm_minctl (struct device *dev, \
+ char *buf) \
+{ \
+ return show_pwm_auto_pwm_minctl(dev, buf, offset - 1); \
+} \
+static ssize_t set_pwm##offset##_auto_pwm_minctl (struct device *dev, \
+ const char *buf, size_t count) \
+{ \
+ return set_pwm_auto_pwm_minctl(dev, buf, count, offset - 1);\
+} \
+static ssize_t show_pwm##offset##_auto_pwm_freq (struct device *dev, \
+ char *buf) \
+{ \
+ return show_pwm_auto_pwm_freq(dev, buf, offset - 1); \
+} \
+static ssize_t set_pwm##offset##_auto_pwm_freq(struct device *dev, \
+ const char *buf, size_t count) \
+{ \
+ return set_pwm_auto_pwm_freq(dev, buf, count, offset - 1); \
+} \
+static DEVICE_ATTR(pwm##offset##_auto_channels, S_IRUGO | S_IWUSR, \
+ show_pwm##offset##_auto_channels, \
+ set_pwm##offset##_auto_channels) \
+static DEVICE_ATTR(pwm##offset##_auto_pwm_min, S_IRUGO | S_IWUSR, \
+ show_pwm##offset##_auto_pwm_min, \
+ set_pwm##offset##_auto_pwm_min) \
+static DEVICE_ATTR(pwm##offset##_auto_pwm_minctl, S_IRUGO | S_IWUSR, \
+ show_pwm##offset##_auto_pwm_minctl, \
+ set_pwm##offset##_auto_pwm_minctl) \
+static DEVICE_ATTR(pwm##offset##_auto_pwm_freq, S_IRUGO | S_IWUSR, \
+ show_pwm##offset##_auto_pwm_freq, \
+ set_pwm##offset##_auto_pwm_freq)
+pwm_auto(1);
+pwm_auto(2);
+pwm_auto(3);
+
+/* Temperature settings for automatic PWM control */
+
+static ssize_t show_temp_auto_temp_off(struct device *dev, char *buf, int nr)
+{
+ struct lm85_data *data = lm85_update_device(dev);
+ return sprintf(buf,"%d\n", TEMP_FROM_REG(data->zone[nr].limit) -
+ HYST_FROM_REG(data->zone[nr].hyst));
+}
+static ssize_t set_temp_auto_temp_off(struct device *dev, const char *buf,
+ size_t count, int nr)
+{
+ struct i2c_client *client = to_i2c_client(dev);
+ struct lm85_data *data = i2c_get_clientdata(client);
+ int min, val;
+
+ down(&data->update_lock);
+ val = simple_strtol(buf, NULL, 10);
+ min = TEMP_FROM_REG(data->zone[nr].limit);
+ data->zone[nr].off_desired = TEMP_TO_REG(val);
+ data->zone[nr].hyst = HYST_TO_REG(min - val);
+ if ( nr = 0 || nr = 1 ) {
+ lm85_write_value(client, LM85_REG_AFAN_HYST1,
+ (data->zone[0].hyst << 4)
+ | data->zone[1].hyst
+ );
+ } else {
+ lm85_write_value(client, LM85_REG_AFAN_HYST2,
+ (data->zone[2].hyst << 4)
+ );
+ }
+ up(&data->update_lock);
+ return count;
+}
+static ssize_t show_temp_auto_temp_min(struct device *dev, char *buf, int nr)
+{
+ struct lm85_data *data = lm85_update_device(dev);
+ return sprintf(buf,"%d\n", TEMP_FROM_REG(data->zone[nr].limit) );
+}
+static ssize_t set_temp_auto_temp_min(struct device *dev, const char *buf,
+ size_t count, int nr)
+{
+ struct i2c_client *client = to_i2c_client(dev);
+ struct lm85_data *data = i2c_get_clientdata(client);
+ int val;
+
+ down(&data->update_lock);
+ val = simple_strtol(buf, NULL, 10);
+ data->zone[nr].limit = TEMP_TO_REG(val);
+ lm85_write_value(client, LM85_REG_AFAN_LIMIT(nr),
+ data->zone[nr].limit);
+
+/* Update temp_auto_max and temp_auto_range */
+ data->zone[nr].range = RANGE_TO_REG(
+ TEMP_FROM_REG(data->zone[nr].max_desired) -
+ TEMP_FROM_REG(data->zone[nr].limit));
+ lm85_write_value(client, LM85_REG_AFAN_RANGE(nr),
+ ((data->zone[nr].range & 0x0f) << 4)
+ | (data->autofan[nr].freq & 0x07));
+
+/* Update temp_auto_hyst and temp_auto_off */
+ data->zone[nr].hyst = HYST_TO_REG(TEMP_FROM_REG(
+ data->zone[nr].limit) - TEMP_FROM_REG(
+ data->zone[nr].off_desired));
+ if ( nr = 0 || nr = 1 ) {
+ lm85_write_value(client, LM85_REG_AFAN_HYST1,
+ (data->zone[0].hyst << 4)
+ | data->zone[1].hyst
+ );
+ } else {
+ lm85_write_value(client, LM85_REG_AFAN_HYST2,
+ (data->zone[2].hyst << 4)
+ );
+ }
+ up(&data->update_lock);
+ return count;
+}
+static ssize_t show_temp_auto_temp_max(struct device *dev, char *buf, int nr)
+{
+ struct lm85_data *data = lm85_update_device(dev);
+ return sprintf(buf,"%d\n", TEMP_FROM_REG(data->zone[nr].limit) +
+ RANGE_FROM_REG(data->zone[nr].range));
+}
+static ssize_t set_temp_auto_temp_max(struct device *dev, const char *buf,
+ size_t count, int nr)
+{
+ struct i2c_client *client = to_i2c_client(dev);
+ struct lm85_data *data = i2c_get_clientdata(client);
+ int min, val;
+
+ down(&data->update_lock);
+ min = TEMP_FROM_REG(data->zone[nr].limit);
+ val = simple_strtol(buf, NULL, 10);
+ data->zone[nr].max_desired = TEMP_TO_REG(val);
+ data->zone[nr].range = RANGE_TO_REG(
+ val - min);
+ lm85_write_value(client, LM85_REG_AFAN_RANGE(nr),
+ ((data->zone[nr].range & 0x0f) << 4)
+ | (data->autofan[nr].freq & 0x07));
+ up(&data->update_lock);
+ return count;
+}
+static ssize_t show_temp_auto_temp_crit(struct device *dev, char *buf, int nr)
+{
+ struct lm85_data *data = lm85_update_device(dev);
+ return sprintf(buf,"%d\n", TEMP_FROM_REG(data->zone[nr].critical));
+}
+static ssize_t set_temp_auto_temp_crit(struct device *dev, const char *buf,
+ size_t count, int nr)
+{
+ struct i2c_client *client = to_i2c_client(dev);
+ struct lm85_data *data = i2c_get_clientdata(client);
+ int val;
+
+ down(&data->update_lock);
+ val = simple_strtol(buf, NULL, 10);
+ data->zone[nr].critical = TEMP_TO_REG(val);
+ lm85_write_value(client, LM85_REG_AFAN_CRITICAL(nr),
+ data->zone[nr].critical);
+ up(&data->update_lock);
+ return count;
+}
+#define temp_auto(offset) \
+static ssize_t show_temp##offset##_auto_temp_off (struct device *dev, \
+ char *buf) \
+{ \
+ return show_temp_auto_temp_off(dev, buf, offset - 1); \
+} \
+static ssize_t set_temp##offset##_auto_temp_off (struct device *dev, \
+ const char *buf, size_t count) \
+{ \
+ return set_temp_auto_temp_off(dev, buf, count, offset - 1); \
+} \
+static ssize_t show_temp##offset##_auto_temp_min (struct device *dev, \
+ char *buf) \
+{ \
+ return show_temp_auto_temp_min(dev, buf, offset - 1); \
+} \
+static ssize_t set_temp##offset##_auto_temp_min (struct device *dev, \
+ const char *buf, size_t count) \
+{ \
+ return set_temp_auto_temp_min(dev, buf, count, offset - 1); \
+} \
+static ssize_t show_temp##offset##_auto_temp_max (struct device *dev, \
+ char *buf) \
+{ \
+ return show_temp_auto_temp_max(dev, buf, offset - 1); \
+} \
+static ssize_t set_temp##offset##_auto_temp_max (struct device *dev, \
+ const char *buf, size_t count) \
+{ \
+ return set_temp_auto_temp_max(dev, buf, count, offset - 1); \
+} \
+static ssize_t show_temp##offset##_auto_temp_crit (struct device *dev, \
+ char *buf) \
+{ \
+ return show_temp_auto_temp_crit(dev, buf, offset - 1); \
+} \
+static ssize_t set_temp##offset##_auto_temp_crit (struct device *dev, \
+ const char *buf, size_t count) \
+{ \
+ return set_temp_auto_temp_crit(dev, buf, count, offset - 1);\
+} \
+static DEVICE_ATTR(temp##offset##_auto_temp_off, S_IRUGO | S_IWUSR, \
+ show_temp##offset##_auto_temp_off, \
+ set_temp##offset##_auto_temp_off) \
+static DEVICE_ATTR(temp##offset##_auto_temp_min, S_IRUGO | S_IWUSR, \
+ show_temp##offset##_auto_temp_min, \
+ set_temp##offset##_auto_temp_min) \
+static DEVICE_ATTR(temp##offset##_auto_temp_max, S_IRUGO | S_IWUSR, \
+ show_temp##offset##_auto_temp_max, \
+ set_temp##offset##_auto_temp_max) \
+static DEVICE_ATTR(temp##offset##_auto_temp_crit, S_IRUGO | S_IWUSR, \
+ show_temp##offset##_auto_temp_crit, \
+ set_temp##offset##_auto_temp_crit)
+temp_auto(1);
+temp_auto(2);
+temp_auto(3);
+
int lm85_attach_adapter(struct i2c_adapter *adapter)
{
return i2c_detect(adapter, &addr_data, lm85_detect);
@@ -881,6 +1216,30 @@ int lm85_detect(struct i2c_adapter *adap
device_create_file(&new_client->dev, &dev_attr_vrm);
device_create_file(&new_client->dev, &dev_attr_in0_ref);
device_create_file(&new_client->dev, &dev_attr_alarms);
+ device_create_file(&new_client->dev, &dev_attr_pwm1_auto_channels);
+ device_create_file(&new_client->dev, &dev_attr_pwm2_auto_channels);
+ device_create_file(&new_client->dev, &dev_attr_pwm3_auto_channels);
+ device_create_file(&new_client->dev, &dev_attr_pwm1_auto_pwm_min);
+ device_create_file(&new_client->dev, &dev_attr_pwm2_auto_pwm_min);
+ device_create_file(&new_client->dev, &dev_attr_pwm3_auto_pwm_min);
+ device_create_file(&new_client->dev, &dev_attr_pwm1_auto_pwm_minctl);
+ device_create_file(&new_client->dev, &dev_attr_pwm2_auto_pwm_minctl);
+ device_create_file(&new_client->dev, &dev_attr_pwm3_auto_pwm_minctl);
+ device_create_file(&new_client->dev, &dev_attr_pwm1_auto_pwm_freq);
+ device_create_file(&new_client->dev, &dev_attr_pwm2_auto_pwm_freq);
+ device_create_file(&new_client->dev, &dev_attr_pwm3_auto_pwm_freq);
+ device_create_file(&new_client->dev, &dev_attr_temp1_auto_temp_off);
+ device_create_file(&new_client->dev, &dev_attr_temp2_auto_temp_off);
+ device_create_file(&new_client->dev, &dev_attr_temp3_auto_temp_off);
+ device_create_file(&new_client->dev, &dev_attr_temp1_auto_temp_min);
+ device_create_file(&new_client->dev, &dev_attr_temp2_auto_temp_min);
+ device_create_file(&new_client->dev, &dev_attr_temp3_auto_temp_min);
+ device_create_file(&new_client->dev, &dev_attr_temp1_auto_temp_max);
+ device_create_file(&new_client->dev, &dev_attr_temp2_auto_temp_max);
+ device_create_file(&new_client->dev, &dev_attr_temp3_auto_temp_max);
+ device_create_file(&new_client->dev, &dev_attr_temp1_auto_temp_crit);
+ device_create_file(&new_client->dev, &dev_attr_temp2_auto_temp_crit);
+ device_create_file(&new_client->dev, &dev_attr_temp3_auto_temp_crit);
return 0;
@@ -1164,7 +1523,7 @@ static void __exit sm_lm85_exit(void)
* post 2.7.0 CVS changes.
*/
MODULE_LICENSE("GPL");
-MODULE_AUTHOR("Philip Pokorny <ppokorny@penguincomputing.com>, Margit Schubert-While <margitsw@t-online.de>");
+MODULE_AUTHOR("Philip Pokorny <ppokorny@penguincomputing.com>, Margit Schubert-While <margitsw@t-online.de>, Justin Thiessen <jthiessen@penguincomputing.com");
MODULE_DESCRIPTION("LM85-B, LM85-C driver");
module_init(sm_lm85_init);
next reply other threads:[~2005-05-19 6:25 UTC|newest]
Thread overview: 13+ messages / expand[flat|nested] mbox.gz Atom feed top
2005-05-19 6:25 Justin Thiessen [this message]
2005-05-19 6:25 ` [PATCH] 2.6 lm85.c driver update Greg KH
2004-10-25 20:36 ` Justin Thiessen
2005-05-19 6:25 ` Justin Thiessen
2004-10-25 20:59 ` Jean Delvare
2005-05-19 6:25 ` Jean Delvare
2005-05-19 6:25 ` Justin Thiessen
2004-11-05 21:48 ` Greg KH
2005-05-19 6:25 ` Greg KH
2004-11-05 22:25 ` Justin Thiessen
2005-05-19 6:25 ` Justin Thiessen
2004-11-09 0:49 ` Greg KH
2005-05-19 6:25 ` Greg KH
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20041004200943.GE22290@penguincomputing.com \
--to=jthiessen@penguincomputing.com \
--cc=lm-sensors@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.