All of lore.kernel.org
 help / color / mirror / Atom feed
From: Jens Axboe <axboe@suse.de>
To: James Bottomley <James.Bottomley@SteelEye.com>
Cc: "Vladimir B. Savkin" <master@sectorb.msk.ru>,
	Linux Kernel <linux-kernel@vger.kernel.org>
Subject: Re: Linux 2.6.10-rc2 OOPS on boot with 3ware + reiserfs
Date: Fri, 19 Nov 2004 09:40:04 +0100	[thread overview]
Message-ID: <20041119084003.GV26240@suse.de> (raw)
In-Reply-To: <1100813973.1574.29.camel@mulgrave>

On Thu, Nov 18 2004, James Bottomley wrote:
> On Thu, 2004-11-18 at 15:32, Jens Axboe wrote:
> > It's clearly not the only one, the first 3 I looked at all did it.
> > That's the big mess. I'll do an audit.
> 
> Thanks ... I'll owe you a beverage of your choice...

I'm sure that can be arranged :-)

Here's an audit of drivers/scsi, there are quite a few of them in there.
I've opted to keep the ->scsi_done() calls in there and rather return 0,
instead of killing them and returning something more appropriate. I'll
send this to linux-scsi with maintainers CC'ed as well.

===== drivers/scsi/3w-9xxx.c 1.4 vs edited =====
--- 1.4/drivers/scsi/3w-9xxx.c	2004-07-16 17:20:43 +02:00
+++ edited/drivers/scsi/3w-9xxx.c	2004-11-18 22:55:58 +01:00
@@ -1746,6 +1746,7 @@ static int twa_scsi_queue(struct scsi_cm
 		twa_free_request_id(tw_dev, request_id);
 		SCpnt->result = (DID_ERROR << 16);
 		done(SCpnt);
+		reval = 0;
 	}
 
 	return retval;
===== drivers/scsi/3w-xxxx.c 1.47 vs edited =====
--- 1.47/drivers/scsi/3w-xxxx.c	2004-10-07 05:20:16 +02:00
+++ edited/drivers/scsi/3w-xxxx.c	2004-11-18 22:55:31 +01:00
@@ -2067,6 +2067,7 @@ static int tw_scsi_queue(struct scsi_cmn
 		tw_state_request_finish(tw_dev, request_id);
 		SCpnt->result = (DID_ERROR << 16);
 		done(SCpnt);
+		retval = 0;
 	}
 out:
 	return retval;
===== drivers/scsi/ide-scsi.c 1.47 vs edited =====
--- 1.47/drivers/scsi/ide-scsi.c	2004-10-22 01:46:25 +02:00
+++ edited/drivers/scsi/ide-scsi.c	2004-11-18 22:54:09 +01:00
@@ -891,7 +891,7 @@ abort:
 	if (rq) kfree (rq);
 	cmd->result = DID_ERROR << 16;
 	done(cmd);
-	return 1;
+	return 0;
 }
 
 static int idescsi_eh_abort (struct scsi_cmnd *cmd)
===== drivers/scsi/megaraid.c 1.73 vs edited =====
--- 1.73/drivers/scsi/megaraid.c	2004-11-11 09:43:34 +01:00
+++ edited/drivers/scsi/megaraid.c	2004-11-19 09:03:43 +01:00
@@ -634,11 +634,7 @@ mega_build_cmd(adapter_t *adapter, Scsi_
 			}
 
 			if(!(scb = mega_allocate_scb(adapter, cmd))) {
-
-				cmd->result = (DID_ERROR << 16);
-				cmd->scsi_done(cmd);
 				*busy = 1;
-
 				return NULL;
 			}
 
@@ -677,11 +673,7 @@ mega_build_cmd(adapter_t *adapter, Scsi_
 
 			/* Allocate a SCB and initialize passthru */
 			if(!(scb = mega_allocate_scb(adapter, cmd))) {
-
-				cmd->result = (DID_ERROR << 16);
-				cmd->scsi_done(cmd);
 				*busy = 1;
-
 				return NULL;
 			}
 			pthru = scb->pthru;
@@ -723,11 +715,7 @@ mega_build_cmd(adapter_t *adapter, Scsi_
 
 			/* Allocate a SCB and initialize mailbox */
 			if(!(scb = mega_allocate_scb(adapter, cmd))) {
-
-				cmd->result = (DID_ERROR << 16);
-				cmd->scsi_done(cmd);
 				*busy = 1;
-
 				return NULL;
 			}
 			mbox = (mbox_t *)scb->raw_mbox;
@@ -867,11 +855,7 @@ mega_build_cmd(adapter_t *adapter, Scsi_
 
 			/* Allocate a SCB and initialize mailbox */
 			if(!(scb = mega_allocate_scb(adapter, cmd))) {
-
-				cmd->result = (DID_ERROR << 16);
-				cmd->scsi_done(cmd);
 				*busy = 1;
-
 				return NULL;
 			}
 
@@ -899,11 +883,7 @@ mega_build_cmd(adapter_t *adapter, Scsi_
 	else {
 		/* Allocate a SCB and initialize passthru */
 		if(!(scb = mega_allocate_scb(adapter, cmd))) {
-
-			cmd->result = (DID_ERROR << 16);
-			cmd->scsi_done(cmd);
 			*busy = 1;
-
 			return NULL;
 		}
 
===== drivers/scsi/ncr53c8xx.c 1.50 vs edited =====
--- 1.50/drivers/scsi/ncr53c8xx.c	2004-11-11 09:43:34 +01:00
+++ edited/drivers/scsi/ncr53c8xx.c	2004-11-19 09:06:28 +01:00
@@ -7517,6 +7517,7 @@ printk("ncr53c8xx : command successfully
      if (sts != DID_OK) {
           unmap_scsi_data(np, cmd);
           done(cmd);
+	  sts = 0;
      }
 
      return sts;
===== drivers/scsi/nsp32.c 1.32 vs edited =====
--- 1.32/drivers/scsi/nsp32.c	2004-10-20 21:24:36 +02:00
+++ edited/drivers/scsi/nsp32.c	2004-11-19 09:10:05 +01:00
@@ -970,8 +970,7 @@ static int nsp32_queuecommand(struct scs
 		data->CurrentSC = NULL;
 		SCpnt->result   = DID_NO_CONNECT << 16;
 		done(SCpnt);
-
-		return SCSI_MLQUEUE_HOST_BUSY;
+		return 0;
 	}
 
 	/* check target ID is not same as this initiator ID */
@@ -979,7 +978,7 @@ static int nsp32_queuecommand(struct scs
 		nsp32_dbg(NSP32_DEBUG_QUEUECOMMAND, "terget==host???");
 		SCpnt->result = DID_BAD_TARGET << 16;
 		done(SCpnt);
-		return SCSI_MLQUEUE_DEVICE_BUSY;
+		return 0;
 	}
 
 	/* check target LUN is allowable value */
@@ -987,7 +986,7 @@ static int nsp32_queuecommand(struct scs
 		nsp32_dbg(NSP32_DEBUG_QUEUECOMMAND, "no more lun");
 		SCpnt->result = DID_BAD_TARGET << 16;
 		done(SCpnt);
-		return SCSI_MLQUEUE_DEVICE_BUSY;
+		return 0;
 	}
 
 	show_command(SCpnt);
@@ -1019,7 +1018,7 @@ static int nsp32_queuecommand(struct scs
 		nsp32_msg(KERN_ERR, "SGT fail");
 		SCpnt->result = DID_ERROR << 16;
 		nsp32_scsi_done(SCpnt);
-		return SCSI_MLQUEUE_HOST_BUSY;
+		return 0;
 	}
 
 	/* Build IDENTIFY */
@@ -1089,7 +1088,6 @@ static int nsp32_queuecommand(struct scs
 	if (ret != TRUE) {
 		nsp32_dbg(NSP32_DEBUG_QUEUECOMMAND, "selection fail");
 		nsp32_scsi_done(SCpnt);
-		return SCSI_MLQUEUE_DEVICE_BUSY;
 	}
 
 	return 0;
===== drivers/scsi/aacraid/aachba.c 1.29 vs edited =====
--- 1.29/drivers/scsi/aacraid/aachba.c	2004-10-01 17:10:08 +02:00
+++ edited/drivers/scsi/aacraid/aachba.c	2004-11-18 23:10:40 +01:00
@@ -894,7 +894,7 @@ int aac_read(struct scsi_cmnd * scsicmd,
 	aac_io_done(scsicmd);
 	fib_complete(cmd_fibcontext);
 	fib_free(cmd_fibcontext);
-	return -1;
+	return 0;
 }
 
 static int aac_write(struct scsi_cmnd * scsicmd, int cid)
@@ -928,7 +928,7 @@ static int aac_write(struct scsi_cmnd * 
 	if (!(cmd_fibcontext = fib_alloc(dev))) {
 		scsicmd->result = DID_ERROR << 16;
 		aac_io_done(scsicmd);
-		return -1;
+		return 0;
 	}
 	fib_init(cmd_fibcontext);
 
@@ -1004,7 +1004,7 @@ static int aac_write(struct scsi_cmnd * 
 
 	fib_complete(cmd_fibcontext);
 	fib_free(cmd_fibcontext);
-	return -1;
+	return 0;
 }
 
 
===== drivers/scsi/megaraid/megaraid_mbox.c 1.9 vs edited =====
--- 1.9/drivers/scsi/megaraid/megaraid_mbox.c	2004-10-08 17:12:09 +02:00
+++ edited/drivers/scsi/megaraid/megaraid_mbox.c	2004-11-18 23:12:10 +01:00
@@ -1623,6 +1623,7 @@ megaraid_queue_command(struct scsi_cmnd 
 
 	if (!scb) {	// command already completed
 		done(scp);
+		return 0;
 	}
 
 	return if_busy;
===== drivers/scsi/pcmcia/nsp_cs.c 1.35 vs edited =====
--- 1.35/drivers/scsi/pcmcia/nsp_cs.c	2004-10-05 22:11:16 +02:00
+++ edited/drivers/scsi/pcmcia/nsp_cs.c	2004-11-19 09:36:39 +01:00
@@ -226,7 +226,7 @@ static int nsp_queuecommand(Scsi_Cmnd *S
 		nsp_msg(KERN_DEBUG, "CurrentSC!=NULL this can't be happen");
 		SCpnt->result   = DID_BAD_TARGET << 16;
 		nsp_scsi_done(SCpnt);
-		return SCSI_MLQUEUE_HOST_BUSY;
+		return 0;
 	}
 
 #if 0
@@ -273,7 +273,7 @@ static int nsp_queuecommand(Scsi_Cmnd *S
 		nsp_dbg(NSP_DEBUG_QUEUECOMMAND, "selection fail");
 		SCpnt->result   = DID_BUS_BUSY << 16;
 		nsp_scsi_done(SCpnt);
-		return SCSI_MLQUEUE_DEVICE_BUSY;
+		return 0;
 	}
 
 

-- 
Jens Axboe


  reply	other threads:[~2004-11-19  8:41 UTC|newest]

Thread overview: 90+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2004-11-15  2:49 Linux 2.6.10-rc2 Linus Torvalds
2004-11-15  4:07 ` 2.6.10-rc2 doesn't boot Adrian Bunk
2004-11-15  4:48   ` Linus Torvalds
2004-11-15  5:29     ` Adrian Bunk
2004-11-15 23:27       ` Chris Wright
2004-11-15 23:58         ` Andrew Morton
2004-11-18 23:14         ` 2.6.10-rc2 doesn't boot (if no floppy device) Len Brown
2004-11-19  7:09           ` Chris Wright
2004-11-20  9:02             ` Len Brown
2004-11-20 12:40               ` Adrian Bunk
2004-11-20 18:28                 ` Linus Torvalds
2004-11-20 19:10                   ` Linus Torvalds
2004-11-22 19:55                     ` Len Brown
2004-11-24 16:26                     ` Alan Cox
2004-11-21 16:29                   ` Adrian Bunk
2004-11-22 19:29                   ` Len Brown
2004-11-22 20:02                     ` Linus Torvalds
2004-11-22 20:10                       ` Linus Torvalds
2004-11-22 20:38                       ` Len Brown
2004-11-23  2:45                         ` Linus Torvalds
2004-11-23  4:57                           ` Linus Torvalds
2004-11-23  7:06                             ` Len Brown
2004-11-23 20:13                               ` Stian Jordet
2004-11-23  2:00                   ` Chris Wright
2004-11-22 18:28                 ` Len Brown
2004-11-23  0:46                   ` Adrian Bunk
2004-11-23  1:07                     ` why use ACPI (Re: 2.6.10-rc2 doesn't boot (if no floppy device)) Len Brown
2004-11-23  1:23                       ` Dave Jones
2004-11-23  1:52                         ` Adrian Bunk
2004-11-23  1:37                       ` Adrian Bunk
2004-11-23  2:47                         ` Len Brown
2004-11-23  2:50                           ` Dave Jones
2004-11-23  3:13                             ` Gene Heskett
2004-11-23  3:45                               ` Dave Jones
2004-11-20 16:41               ` 2.6.10-rc2 doesn't boot (if no floppy device) Linus Torvalds
2004-11-22 19:07                 ` Len Brown
2004-11-22 19:23                   ` Linus Torvalds
2004-11-22 20:24                     ` Len Brown
2004-11-22 20:31                       ` Linus Torvalds
2004-11-22 20:36                         ` Linus Torvalds
2004-11-22 20:54                           ` Len Brown
2004-11-22 20:51                         ` Len Brown
2004-11-23  1:58               ` Chris Wright
2004-11-19 13:47           ` Adrian Bunk
2004-11-23  1:57           ` Chris Wright
2004-11-15  7:25   ` 2.6.10-rc2 doesn't boot Andrew Morton
2004-11-15 10:26 ` Linux 2.6.10-rc2 Russell King
2004-11-15 11:24   ` Ben Dooks
2004-11-15 11:55 ` Nick Piggin
2004-11-15 20:20   ` Andrew Morton
2004-11-16  0:29 ` Linux 2.6.10-rc2 [dvb-bt8xx unload oops] Eyal Lebedinsky
2004-11-16  9:57   ` Eyal Lebedinsky
2004-11-17 23:17   ` Eyal Lebedinsky
2004-11-16  7:55 ` Linux 2.6.10-rc2 SAVAGEFB startup crash Philipp Matthias Hahn
2004-11-16  8:17   ` Colin Leroy
2004-11-16 12:43   ` Antonino A. Daplas
2004-11-16 17:27     ` Philipp Matthias Hahn
2004-11-16 21:20       ` Antonino A. Daplas
2004-11-17 11:55         ` Philipp Matthias Hahn
2004-11-16 21:43       ` Antonino A. Daplas
2004-11-16 16:25 ` Linux 2.6.10-rc2 Guido Guenther
2004-11-17 15:54 ` Andrew Walrond
2004-11-17 15:54   ` Andrew Walrond
     [not found]   ` <Pine.LNX.4.58.0411170802500.2222@ppc970.osdl.org>
2004-11-17 19:17     ` Andrew Walrond
2004-11-17 22:33       ` Andrew Walrond
2004-11-17 23:12         ` Linus Torvalds
2004-11-17 23:37           ` Andrew Walrond
2004-11-18  0:12             ` Antonino A. Daplas
2004-11-19  9:06               ` Guido Guenther
2004-11-18  0:01           ` Antonino A. Daplas
2004-11-18 10:19             ` Geert Uytterhoeven
2004-11-17 16:58 ` Linux 2.6.10-rc2 OOPS on boot with 3ware + reiserfs Vladimir B. Savkin
     [not found]   ` <Pine.LNX.4.58.0411170935040.2222@ppc970.osdl.org>
     [not found]     ` <20041118103526.GC26240@suse.de>
2004-11-18 16:02       ` Vladimir B. Savkin
2004-11-18 18:39         ` Jens Axboe
2004-11-18 19:10           ` Jens Axboe
2004-11-18 19:22             ` James Bottomley
2004-11-18 21:32               ` Jens Axboe
2004-11-18 21:39                 ` James Bottomley
2004-11-19  8:40                   ` Jens Axboe [this message]
2004-11-17 19:32 ` Linux 2.6.10-rc2 start_udev very slow Andrew Walrond
2004-11-17 23:13   ` Greg KH
2004-12-16 15:56   ` Greg KH
2004-12-16 20:57     ` Andrew Walrond
2004-12-16 21:11       ` Greg KH
2004-12-16 21:20         ` Andrew Walrond
2004-12-16 21:46           ` Greg KH
2004-11-18 17:26 ` Linux 2.6.10-rc2 Vladimir B. Savkin
2004-11-18 17:59   ` Linus Torvalds
2004-11-18 18:01     ` Matthew Wilcox
2004-11-19  8:43       ` Vladimir B. Savkin

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20041119084003.GV26240@suse.de \
    --to=axboe@suse.de \
    --cc=James.Bottomley@SteelEye.com \
    --cc=linux-kernel@vger.kernel.org \
    --cc=master@sectorb.msk.ru \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.