From: Oliver Bausinger <bausi@bausi.org>
To: linux-ide@vger.kernel.org
Cc: Gerald Hopf <gerald.hopf@nv-systems.net>
Subject: siimage annoyance (was: ata_sil problems (lockup at boottime))
Date: Sun, 5 Dec 2004 15:15:34 +0100 [thread overview]
Message-ID: <200412051515.34666.bausi@bausi.org> (raw)
In-Reply-To: <200412050908.33124.bausi@bausi.org>
Replying to myself after more experimentation:
> [The other possible thing to do is to use the siimage driver in
> drivers/ide, but this one stopped working with 2.6.8 and further. The
> siimage driver works quite good with 2.6.7, so this is another proof for no
> hardware problems]
>
Ok, support for the deprected siimage driver has to be explicitly enabled
unter drivers/ide (CONFIG_BLK_DEV_IDE_SATA). Then it recognizes the chipset
and seems to work so far.
The only annoyance is that the driver hangs for some seconds probing the
second port (which is unused):
SiI3112 Serial ATA: IDE controller at PCI slot 0000:00:0a.0
PCI: Found IRQ 5 for device 0000:00:0a.0
SiI3112 Serial ATA: chipset revision 1
SiI3112 Serial ATA: 100% native mode on irq 5
ide2: MMIO-DMA , BIOS settings: hde:DMA, hdf:DMA
ide3: MMIO-DMA , BIOS settings: hdg:pio, hdh:pio
Probing IDE interface ide2...
hde: SAMSUNG SP1614C, ATA DISK drive
ide2 at 0xd0800080-0xd0800087,0xd080008a on irq 5
Probing IDE interface ide3...
hdg: no response (status = 0xfe)
But one can live with that.
Greetings
Bausi
next prev parent reply other threads:[~2004-12-05 14:15 UTC|newest]
Thread overview: 7+ messages / expand[flat|nested] mbox.gz Atom feed top
2004-12-04 23:34 sata_sil problems (lockup at boottime) Gerald Hopf
2004-12-05 8:08 ` Oliver Bausinger
2004-12-05 14:15 ` Oliver Bausinger [this message]
2004-12-05 16:10 ` Bartlomiej Zolnierkiewicz
2004-12-05 16:38 ` Oliver Bausinger
2004-12-06 22:16 ` Gerald Hopf
2004-12-07 8:40 ` Oliver Bausinger
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=200412051515.34666.bausi@bausi.org \
--to=bausi@bausi.org \
--cc=gerald.hopf@nv-systems.net \
--cc=linux-ide@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.