All of lore.kernel.org
 help / color / mirror / Atom feed
From: Mike Frysinger <vapier@gentoo.org>
To: parisc-linux@parisc-linux.org
Subject: [parisc-linux] linux-2.6.10-pa1 panic on C360 in SCSI driver
Date: Sun, 26 Dec 2004 05:04:40 -0500	[thread overview]
Message-ID: <200412260504.40205.vapier@gentoo.org> (raw)

[-- Attachment #1: Type: text/plain, Size: 358 bytes --]

seems to be a new bug because building a 2.6.8.1-pa7 kernel with same .config 
works fine while a 2.6.10-pa1 panics ;(

find attached:
2.6.10-pa1-scsi-panic - dmesg output from scsi driver up through panic
2.6.8.1-pa11-dmesg - scsi dmesg output from a good kernel
config.bz2 - my .config from 2.6.10-pa1

build system:
gcc-3.3.5 + binutils-2.15.92.0.2
-mike

[-- Attachment #2: 2.6.10-pa1-scsi-panic --]
[-- Type: text/plain, Size: 2345 bytes --]

sym0: <875> rev 0x4 at pci 0000:00:13.0 irq 99
sym0: No NVRAM, ID 7, Fast-20, SE, parity checking
sym0: SCSI BUS has been reset.
scsi0 : sym-2.1.18m
elevator: using anticipatory as default io scheduler
  Vendor: IBM       Model: DDRS-34560WS      Rev: HP01
  Type:   Direct-Access                      ANSI SCSI revision: 02
sym0:6:0: tagged command queuing enabled, command queue depth 16.
 target0:0:6: Beginning Domain Validation
sym0:6: wide asynchronous.
sym0:6: FAST-20 WIDE SCSI 40.0 MB/s ST (50.0 ns, offset 15)
 target0:0:6: Domain Validation skipping write tests
 target0:0:6: Ending Domain Validation
sym0:9: FAST-20 WIDE SCSI 40.0 MB/s ST (50.0 ns, offset 16)
  Vendor: WDIGTL    Model: WDE9150 ULTRA3    Rev: 1.30
  Type:   Direct-Access                      ANSI SCSI revision: 03
sym0:9:0: tagged command queuing enabled, command queue depth 16.
 target0:0:9: Beginning Domain Validation
sym0:9: asynchronous.
sym0:9: wide asynchronous.
Backtrace:
 [<102a51a8>] sym_ppr_nego+0x44/0xe0
 [<1029d6ec>] sym53c8xx_intr+0x30/0x80
 [<10106ca8>] do_irq+0x158/0x160
 [<102424d4>] dino_isr+0xf0/0x100
 [<10106ca8>] do_irq+0x158/0x160
 [<10106dac>] do_cpu_irq_mask+0xfc/0x10c
 [<1010c068>] intr_return+0x0/0x14
 [<1022ab20>] idr_get_new_above_int+0x98/0x15c
 [<1017442c>] generic_permission+0xa8/0x1a0
 [<10162ca0>] shmem_symlink+0x1d8/0x244
 [<1017758c>] vfs_rmdir+0x12c/0x254
 [<10112744>] cpu_idle+0x38/0x3c
 [<10440804>] start_kernel+0x1b8/0x1e4


Kernel Fault: Code=13 regs=10434640 (Addr=00000000)

     YZrvWESTHLNXBCVMcbcbcbcbOGFRQPDI
PSW: 00000000000001001111111100001110 Not tainted
r00-03  00000000 ffffffff 104345c8 00000000
r04-07  10fbd000 00000000 00000010 00000001
r08-11  0000000a 10fbd310 00000009 00000000
r12-15  103ff810 00000000 000000fd f0100000
r16-19  10434140 f0000154 f000014c 02625a00
r20-23  fffffffc 00000000 ffffffff 104345c9
r24-27  0000000a 00000000 01312cff 103d3010
r28-31  000000fa 10400188 10434640 102a0810
sr0-3   00000000 00000000 00000000 00000000
sr4-7   00000000 00000000 00000000 00000000

IASQ: 00000000 00000000 IAOQ: 1023112c 10231130
 IIR: b3202000    ISR: 10240001  IOR: 0d034630
 CPU:        0   CR30: 10434000 CR31: 10438000
 ORIG_R28: 00000000
 IAOQ[0]: $$divU+0xc/0x210
 IAOQ[1]: $$divU+0x10/0x210
 RP(r2): 0x104345c8
Kernel panic - not syncing: Kernel Fault
 <0>Rebooting in 3 seconds..

[-- Attachment #3: config.bz2 --]
[-- Type: application/x-bzip2, Size: 4433 bytes --]

[-- Attachment #4: 2.6.8.1-pa11-dmesg --]
[-- Type: text/plain, Size: 3661 bytes --]

sym0: <875> rev 0x4 at pci 0000:00:13.0 irq 99
sym0: No NVRAM, ID 7, Fast-20, SE, parity checking
sym0: SCSI BUS has been reset.
scsi0 : sym-2.1.18j
Using anticipatory io scheduler
  Vendor: IBM       Model: DDRS-34560WS      Rev: HP01
  Type:   Direct-Access                      ANSI SCSI revision: 02
sym0:6:0: tagged command queuing enabled, command queue depth 16.
scsi(0:0:6:0): Beginning Domain Validation
sym0:6: wide asynchronous.
sym0:6: FAST-20 WIDE SCSI 40.0 MB/s ST (50.0 ns, offset 15)
scsi(0:0:6:0): Domain Validation skipping write tests
scsi(0:0:6:0): Ending Domain Validation
sym0:9: FAST-20 WIDE SCSI 40.0 MB/s ST (50.0 ns, offset 16)
  Vendor: WDIGTL    Model: WDE9150 ULTRA3    Rev: 1.30
  Type:   Direct-Access                      ANSI SCSI revision: 03
sym0:9:0: tagged command queuing enabled, command queue depth 16.
scsi(0:0:9:0): Beginning Domain Validation
sym0:9: FAST-20 SCSI 20.0 MB/s ST (50.0 ns, offset 16)
sym0:9: FAST-20 WIDE SCSI 40.0 MB/s ST (50.0 ns, offset 16)
scsi(0:0:9:0): Write Buffer failure 8000002
scsi(0:0:9:0): Domain Validation detected failure, dropping back
sym0:9: FAST-10 WIDE SCSI 20.0 MB/s ST (100.0 ns, offset 16)
scsi(0:0:9:0): Write Buffer failure 8000002
scsi(0:0:9:0): Domain Validation detected failure, dropping back
sym0:9: FAST-10 WIDE SCSI 13.5 MB/s ST (148.0 ns, offset 16)
scsi(0:0:9:0): Write Buffer failure 8000002
scsi(0:0:9:0): Domain Validation detected failure, dropping back
sym0:9: FAST-5 WIDE SCSI 8.9 MB/s ST (224.0 ns, offset 16)
scsi(0:0:9:0): Write Buffer failure 8000002
scsi(0:0:9:0): Domain Validation detected failure, dropping back
sym0:9: wide asynchronous.
sym0:9:0:M_REJECT to send for : 1-3-1-57-10.
sym0:9: FAST-20 WIDE SCSI 40.0 MB/s ST (50.0 ns, offset 16)
scsi(0:0:9:0): Write Buffer failure 8000002
scsi(0:0:9:0): Domain Validation detected failure, dropping back
sym0:9: wide asynchronous.
sym0:9: FAST-20 WIDE SCSI 40.0 MB/s ST (50.0 ns, offset 16)
scsi(0:0:9:0): Write Buffer failure 8000002
scsi(0:0:9:0): Domain Validation detected failure, dropping back
sym0:9: wide asynchronous.
sym0:9: FAST-20 WIDE SCSI 40.0 MB/s ST (50.0 ns, offset 16)
scsi(0:0:9:0): Write Buffer failure 8000002
scsi(0:0:9:0): Domain Validation Failure, dropping back to Asynchronous
scsi(0:0:9:0): Ending Domain Validation
sym0:9: wide asynchronous.
53c700: Version 2.8 By James.Bottomley@HansenPartnership.com
scsi1: 53c710 rev 2 
scsi1 : LASI SCSI 53c700
  Vendor: TOSHIBA   Model: CD-ROM XM-5301TA  Rev: 1895
  Type:   CD-ROM                             ANSI SCSI revision: 02
scsi(1:0:2:0): Beginning Domain Validation
scsi1: (2:0) Asynchronous
scsi1: (2:0) Synchronous at offset 8, period 236ns
scsi(1:0:2:0): Domain Validation skipping write tests
scsi(1:0:2:0): Ending Domain Validation
SCSI device sda: 8388314 512-byte hdwr sectors (4295 MB)
SCSI device sda: drive cache: write back
 sda: sda1 sda2 sda3 sda4
Attached scsi disk sda at scsi0, channel 0, id 6, lun 0
SCSI device sdb: 17873040 512-byte hdwr sectors (9151 MB)
SCSI device sdb: drive cache: write back
 sdb: unknown partition table
Attached scsi disk sdb at scsi0, channel 0, id 9, lun 0
sr0: scsi-1 drive
Uniform CD-ROM driver Revision: 3.20
Attached scsi CD-ROM sr0 at scsi1, channel 0, id 2, lun 0
Attached scsi generic sg0 at scsi0, channel 0, id 6, lun 0,  type 0
Attached scsi generic sg1 at scsi0, channel 0, id 9, lun 0,  type 0
Attached scsi generic sg2 at scsi1, channel 0, id 2, lun 0,  type 5
STI GSC/PCI core graphics driver Version 0.9a
STI PCI graphic ROM found at f1ff0000 (64 kB), fb at f6000000 (32 MB)
    id 2d08c0a7-9a02587, conforms to spec rev. 8.0a
    graphics card name: PCI_GRAFFITIX1280

[-- Attachment #5: Type: text/plain, Size: 169 bytes --]

_______________________________________________
parisc-linux mailing list
parisc-linux@lists.parisc-linux.org
http://lists.parisc-linux.org/mailman/listinfo/parisc-linux

             reply	other threads:[~2004-12-26 10:04 UTC|newest]

Thread overview: 22+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2004-12-26 10:04 Mike Frysinger [this message]
2004-12-26 17:37 ` [parisc-linux] linux-2.6.10-pa1 panic on C360 in SCSI driver Matthew Wilcox
2004-12-26 17:42   ` Kyle McMartin
2004-12-27  0:26   ` Joel Soete
2004-12-27  0:49     ` Matthew Wilcox
2004-12-28  1:45       ` Mike Frysinger
2004-12-28  3:30         ` James Bottomley
2004-12-28  3:49           ` Mike Frysinger
2004-12-28  3:35         ` Matthew Wilcox
2004-12-28  4:01           ` Mike Frysinger
2004-12-29  3:43             ` Matthew Wilcox
2004-12-29 19:19               ` Mike Frysinger
2004-12-29 21:28                 ` James Bottomley
2004-12-29 21:49                   ` Mike Frysinger
2004-12-29 21:54                     ` Mike Frysinger
2004-12-29 22:03                     ` Matthew Wilcox
2004-12-29 22:37                     ` James Bottomley
2004-12-29 23:16                       ` Mike Frysinger
2004-12-30 17:04                         ` James Bottomley
2004-12-30 20:43                           ` Mike Frysinger
     [not found]                 ` <200501011839.13090.vapier@gentoo.org>
2005-01-02  0:58                   ` Matthew Wilcox
2005-01-04  6:01   ` Randolph Chung

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=200412260504.40205.vapier@gentoo.org \
    --to=vapier@gentoo.org \
    --cc=parisc-linux@parisc-linux.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body. 
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.