All of lore.kernel.org
 help / color / mirror / Atom feed
From: Mike Frysinger <vapier@gentoo.org>
To: parisc-linux@parisc-linux.org
Subject: Re: [parisc-linux] linux-2.6.10-pa1 panic on C360 in SCSI driver
Date: Wed, 29 Dec 2004 18:16:19 -0500	[thread overview]
Message-ID: <200412291816.19157.vapier@gentoo.org> (raw)
In-Reply-To: <1104359873.5298.25.camel@mulgrave>

[-- Attachment #1: Type: text/plain, Size: 301 bytes --]

On Wednesday 29 December 2004 05:37 pm, James Bottomley wrote:
> Could you try this patch, it halves the write buffer length.  That
> should tell us if this drive actually has one and just lies about the
> length, or lies about having one altogether.

added verbose scsi debugging and the patch
-mike

[-- Attachment #2: 2.6.10-pa1-scsi-debug-patch6 --]
[-- Type: text/plain, Size: 5459 bytes --]

sym0: <875> rev 0x4 at pci 0000:00:13.0 irq 99
sym0: No NVRAM, ID 7, Fast-20, SE, parity checking
sym0: SCSI BUS has been reset.
scsi0 : sym-2.1.18m
elevator: using anticipatory as default io scheduler
  Vendor: IBM       Model: DDRS-34560WS      Rev: HP01
  Type:   Direct-Access                      ANSI SCSI revision: 02
sym0:6:0: tagged command queuing enabled, command queue depth 16.
 target0:0:6: Beginning Domain Validation
sym0:6:wide msgout: 1-2-3-1.
sym0:6:wide msgin: 1-2-3-1.
sym0:6:wdtr: wide=1 chg=0.
sym0:6:sync msgout: 1-3-1-c-0.
sym0:6:sync msgin: 1-3-1-c-0.
sym0:6:sdtr: ofs=0 per=12 div=0 fak=0 chg=0.
sym0:6: wide asynchronous.
sym0:6:sync msgout: 1-3-1-c-10.
sym0:6:sync msgin: 1-3-1-c-f.
sym0:6:sdtr: ofs=15 per=12 div=0 fak=0 chg=0.
sym0:6: FAST-20 WIDE SCSI 40.0 MB/s ST (50.0 ns, offset 15)
 target0:0:6: Domain Validation skipping write tests
 target0:0:6: Ending Domain Validation
sym0:9:ppr msgin: 1-6-4-c-0-3f-1-2.
sym0:9: FAST-20 WIDE SCSI 40.0 MB/s ST (50.0 ns, offset 16)
sym0:9:ppr msgout: 1-6-4-c-0-10-1-0.
  Vendor: WDIGTL    Model: WDE9150 ULTRA3    Rev: 1.30
  Type:   Direct-Access                      ANSI SCSI revision: 03
sym0:9:0: tagged command queuing enabled, command queue depth 16.
 target0:0:9: Beginning Domain Validation
sym0:9:wide msgout: 1-2-3-0.
sym0:9:wide msgin: 1-2-3-0.
sym0:9:wdtr: wide=0 chg=0.
sym0:9:sync msgin: 1-3-1-c-1f.
sym0:9:sdtr: ofs=16 per=12 div=0 fak=0 chg=1.
sym0:9: FAST-20 SCSI 20.0 MB/s ST (50.0 ns, offset 16)
sym0:9:sync msgout: 1-3-1-c-10.
sym0:9:wide msgout: 1-2-3-1.
sym0:9:wide msgin: 1-2-3-1.
sym0:9:wdtr: wide=1 chg=0.
sym0:9:sync msgout: 1-3-1-c-10.
sym0:9:sync msgin: 1-3-1-c-10.
sym0:9:sdtr: ofs=16 per=12 div=0 fak=0 chg=0.
sym0:9: FAST-20 WIDE SCSI 40.0 MB/s ST (50.0 ns, offset 16)
 target0:0:9: Domain Validation write buffer length 127
 target0:0:9: Write Buffer failure 8000002
Current DV: sense key Illegal Request
Additional sense: Invalid field in cdb
 target0:0:9: Domain Validation detected failure, dropping back
sym0:9:sync msgout: 1-3-1-d-10.
sym0:9:sync msgin: 1-3-1-19-10.
sym0:9:sdtr: ofs=16 per=25 div=2 fak=0 chg=0.
sym0:9: FAST-10 WIDE SCSI 20.0 MB/s ST (100.0 ns, offset 16)
 target0:0:9: Write Buffer failure 8000002
Current DV: sense key Illegal Request
Additional sense: Invalid field in cdb
 target0:0:9: Domain Validation detected failure, dropping back
sym0:9:sync msgout: 1-3-1-25-10.
sym0:9:sync msgin: 1-3-1-25-10.
sym0:9:sdtr: ofs=16 per=37 div=2 fak=2 chg=0.
sym0:9: FAST-10 WIDE SCSI 13.5 MB/s ST (148.0 ns, offset 16)
 target0:0:9: Write Buffer failure 8000002
Current DV: sense key Illegal Request
Additional sense: Invalid field in cdb
 target0:0:9: Domain Validation detected failure, dropping back
sym0:9:sync msgout: 1-3-1-37-10.
sym0:9:sync msgin: 1-3-1-38-10.
sym0:9:sdtr: ofs=16 per=56 div=4 fak=1 chg=0.
sym0:9: FAST-5 WIDE SCSI 8.9 MB/s ST (224.0 ns, offset 16)
 target0:0:9: Write Buffer failure 8000002
Current DV: sense key Illegal Request
Additional sense: Invalid field in cdb
 target0:0:9: Domain Validation detected failure, dropping back
sym0:9:sync msgout: 1-3-1-54-10.
sym0:9:sync msgin: 1-3-1-57-10.
sym0:9: wide asynchronous.
sym0:9:0:M_REJECT to send for : 1-3-1-57-10.
sym0:9:sync msgout: 1-3-1-c-0.
sym0:9:sync msgin: 1-3-1-c-0.
sym0:9:sdtr: ofs=0 per=12 div=0 fak=0 chg=0.
 target0:0:9: Write Buffer failure 8000002
Current DV: sense key Illegal Request
Additional sense: Invalid field in cdb
 target0:0:9: Domain Validation detected failure, dropping back
sym0:9:sync msgout: 1-3-1-7e-0.
sym0:9:sync msgin: 1-3-1-7e-0.
sym0:9:sdtr: ofs=0 per=126 div=0 fak=0 chg=0.
 target0:0:9: Write Buffer failure 8000002
Current DV: sense key Illegal Request
Additional sense: Invalid field in cdb
 target0:0:9: Domain Validation detected failure, dropping back
sym0:9:sync msgout: 1-3-1-89-0.
sym0:9:sync msgin: 1-3-1-89-0.
sym0:9:sdtr: ofs=0 per=137 div=0 fak=0 chg=0.
 target0:0:9: Write Buffer failure 8000002
Current DV: sense key Illegal Request
Additional sense: Invalid field in cdb
 target0:0:9: Domain Validation Failure, dropping back to Asynchronous
 target0:0:9: Ending Domain Validation
53c700: Version 2.8 By James.Bottomley@HansenPartnership.com
scsi1: 53c710 rev 2 
scsi1 : LASI SCSI 53c700
  Vendor: TOSHIBA   Model: CD-ROM XM-5301TA  Rev: 1895
  Type:   CD-ROM                             ANSI SCSI revision: 02
 target1:0:2: Beginning Domain Validation
scsi1: (2:0) Asynchronous
scsi1: (2:0) Synchronous at offset 8, period 236ns
 target1:0:2: Domain Validation skipping write tests
 target1:0:2: Ending Domain Validation
SCSI device sda: 8388314 512-byte hdwr sectors (4295 MB)
SCSI device sda: drive cache: write back
SCSI device sda: 8388314 512-byte hdwr sectors (4295 MB)
SCSI device sda: drive cache: write back
 sda: sda1 sda2 sda3 sda4
Attached scsi disk sda at scsi0, channel 0, id 6, lun 0
SCSI device sdb: 17873040 512-byte hdwr sectors (9151 MB)
SCSI device sdb: drive cache: write back
SCSI device sdb: 17873040 512-byte hdwr sectors (9151 MB)
SCSI device sdb: drive cache: write back
 sdb: unknown partition table
Attached scsi disk sdb at scsi0, channel 0, id 9, lun 0
sr0: scsi-1 drive
Uniform CD-ROM driver Revision: 3.20
Attached scsi CD-ROM sr0 at scsi1, channel 0, id 2, lun 0
Attached scsi generic sg0 at scsi0, channel 0, id 6, lun 0,  type 0
Attached scsi generic sg1 at scsi0, channel 0, id 9, lun 0,  type 0
Attached scsi generic sg2 at scsi1, channel 0, id 2, lun 0,  type 5

[-- Attachment #3: Type: text/plain, Size: 169 bytes --]

_______________________________________________
parisc-linux mailing list
parisc-linux@lists.parisc-linux.org
http://lists.parisc-linux.org/mailman/listinfo/parisc-linux

  reply	other threads:[~2004-12-29 23:16 UTC|newest]

Thread overview: 22+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2004-12-26 10:04 [parisc-linux] linux-2.6.10-pa1 panic on C360 in SCSI driver Mike Frysinger
2004-12-26 17:37 ` Matthew Wilcox
2004-12-26 17:42   ` Kyle McMartin
2004-12-27  0:26   ` Joel Soete
2004-12-27  0:49     ` Matthew Wilcox
2004-12-28  1:45       ` Mike Frysinger
2004-12-28  3:30         ` James Bottomley
2004-12-28  3:49           ` Mike Frysinger
2004-12-28  3:35         ` Matthew Wilcox
2004-12-28  4:01           ` Mike Frysinger
2004-12-29  3:43             ` Matthew Wilcox
2004-12-29 19:19               ` Mike Frysinger
2004-12-29 21:28                 ` James Bottomley
2004-12-29 21:49                   ` Mike Frysinger
2004-12-29 21:54                     ` Mike Frysinger
2004-12-29 22:03                     ` Matthew Wilcox
2004-12-29 22:37                     ` James Bottomley
2004-12-29 23:16                       ` Mike Frysinger [this message]
2004-12-30 17:04                         ` James Bottomley
2004-12-30 20:43                           ` Mike Frysinger
     [not found]                 ` <200501011839.13090.vapier@gentoo.org>
2005-01-02  0:58                   ` Matthew Wilcox
2005-01-04  6:01   ` Randolph Chung

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=200412291816.19157.vapier@gentoo.org \
    --to=vapier@gentoo.org \
    --cc=parisc-linux@parisc-linux.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body. 
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.