From: gregkh@suse.de (Greg KH)
To: Jean Delvare <khali@linux-fr.org>
Cc: Enrico Bartky <DOSProfi@web.de>,
linux-pci@atrey.karlin.mff.cuni.cz,
LM Sensors <sensors@stimpy.netroedge.com>,
LKML <linux-kernel@vger.kernel.org>,
Maarten Deprez <maartendeprez@scarlet.be>
Subject: M7101
Date: Thu, 19 May 2005 06:25:36 +0000 [thread overview]
Message-ID: <20050207204319.GB26445@kroah.com> (raw)
In-Reply-To: <20050206152615.1ab7498c.khali@linux-fr.org>
On Sun, Feb 06, 2005 at 03:26:15PM +0100, Jean Delvare wrote:
> Hi Enrico,
>
> Sorry for the delay.
>
> > I have a board with the ALI M7101 chip, but I can't activate it in
> > BIOS. I tried to compile the prog/hotplug/m7101.c but I seen that
> > this is only for 2.4 Kernels. Is there a module for 2.6?
>
> The prog/hotplug/m7101.c (from the lm_sensors project) was a quick hack
> and only works with 2.4 kernels, as you noticed. For 2.6 kernels, the
> prefered solution is known as PCI quirks (drivers/pci/quirks.c). I can
> see that you already found that and proposed a patch for the 2.6 kernel
> here:
> http://marc.theaimsgroup.com/?l=linux-kernel&m\x110606482902883
>
> Maarten Deprez then converted it to the proper kernel coding-style:
> http://marc.theaimsgroup.com/?l=linux-kernel&m\x110726276414532
>
> I invite you to test the new patch and confirm that it works for you.
>
> Any chance we could get the PCI folks to review the code and push it
> upwards if it is OK?
I need it resent with the fixes, and a "Signed-off-by:" line to do that
:)
Also, a pci_get_* is called without a matching put.
thanks,
greg k-h
WARNING: multiple messages have this Message-ID (diff)
From: Greg KH <gregkh@suse.de>
To: Jean Delvare <khali@linux-fr.org>
Cc: Enrico Bartky <DOSProfi@web.de>,
linux-pci@atrey.karlin.mff.cuni.cz,
LM Sensors <sensors@stimpy.netroedge.com>,
LKML <linux-kernel@vger.kernel.org>,
Maarten Deprez <maartendeprez@scarlet.be>
Subject: Re: M7101
Date: Mon, 7 Feb 2005 12:43:19 -0800 [thread overview]
Message-ID: <20050207204319.GB26445@kroah.com> (raw)
In-Reply-To: <20050206152615.1ab7498c.khali@linux-fr.org>
On Sun, Feb 06, 2005 at 03:26:15PM +0100, Jean Delvare wrote:
> Hi Enrico,
>
> Sorry for the delay.
>
> > I have a board with the ALI M7101 chip, but I can't activate it in
> > BIOS. I tried to compile the prog/hotplug/m7101.c but I seen that
> > this is only for 2.4 Kernels. Is there a module for 2.6?
>
> The prog/hotplug/m7101.c (from the lm_sensors project) was a quick hack
> and only works with 2.4 kernels, as you noticed. For 2.6 kernels, the
> prefered solution is known as PCI quirks (drivers/pci/quirks.c). I can
> see that you already found that and proposed a patch for the 2.6 kernel
> here:
> http://marc.theaimsgroup.com/?l=linux-kernel&m=110606482902883
>
> Maarten Deprez then converted it to the proper kernel coding-style:
> http://marc.theaimsgroup.com/?l=linux-kernel&m=110726276414532
>
> I invite you to test the new patch and confirm that it works for you.
>
> Any chance we could get the PCI folks to review the code and push it
> upwards if it is OK?
I need it resent with the fixes, and a "Signed-off-by:" line to do that
:)
Also, a pci_get_* is called without a matching put.
thanks,
greg k-h
next prev parent reply other threads:[~2005-05-19 6:25 UTC|newest]
Thread overview: 16+ messages / expand[flat|nested] mbox.gz Atom feed top
2005-01-05 21:18 M7101 Enrico Bartky
2005-05-19 6:25 ` M7101 Enrico Bartky
2005-02-06 14:26 ` M7101 Jean Delvare
2005-05-19 6:25 ` M7101 Jean Delvare
2005-02-06 15:06 ` M7101 Matthew Wilcox
2005-05-19 6:25 ` M7101 Matthew Wilcox
2005-02-08 11:13 ` M7101 Ivan Kokshaysky
2005-05-19 6:25 ` M7101 Ivan Kokshaysky
2005-02-08 20:39 ` M7101 Ondrej Zary
2005-05-19 6:25 ` M7101 Ondrej Zary
2005-02-07 3:42 ` M7101 Grant Grundler
2005-05-19 6:25 ` M7101 Grant Grundler
2005-02-12 18:52 ` M7101 Jean Delvare
2005-05-19 6:25 ` M7101 Jean Delvare
2005-02-07 20:43 ` Greg KH [this message]
2005-05-19 6:25 ` M7101 Greg KH
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20050207204319.GB26445@kroah.com \
--to=gregkh@suse.de \
--cc=DOSProfi@web.de \
--cc=khali@linux-fr.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-pci@atrey.karlin.mff.cuni.cz \
--cc=maartendeprez@scarlet.be \
--cc=sensors@stimpy.netroedge.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.