2.6.11 prep image on radstone ppc4a not booting

2.6.11 prep image on radstone ppc4a not booting

[Brian V. Madzarevic]

I am trying to boot a Linux 2.6.11 prep image on a Radstone PPC4A.
PPC4A Specifications http://www.radstone.com/rtcd/pdfs/ppc4a.pdf

I was trying to get an nfs filesystem mounted, but after the bios
retrieves the kernel using tftp, no more packets are even sent out.  I
don't know if there is a problem with the network driver or the PCI bus
or what.

Here is my boot log:

Radstone Technology.
SilverChip PowerPC PReP Boot Firmware

Version: 4.05
Built (Jan 20 2004 10:34:02)

PPC4a-7400 333MHz, 83MHz Bus Rev. 3B Ser. No. 0003815 ID No. 0xd

PCI devices
0  0 ID 0x00021057 Motorola MPC106 PowerPC Chipset, Rev. 4.0
0  1 Fn 0 ID 0x056510ad Winbond W83C553F ISA bridge, Rev. 1.0
0  1 Fn 1 ID 0x010510ad Winbond W83C553F IDE controller, Rev. 0.5
0  2 ID 0x00061000 LSI 53C860 Ultra SCSI/Narrow, Rev. 0.2
0  3 ID 0x00191011 DEC DC21143 PCI/CardBus 10/100 Mbit Ethernet Ctlr,
Rev. 4.1
0  4 ID 0x000010e3 Tundra CA91C042 VMEbus Bridge, Rev. 0.1

2 Mbytes of L2 cache on a 133MHz cache bus
128 Mbytes of SDRAM

Floppy drive 0
Floppy drive 1
SCSI id 0
SCSI id 1
SCSI id 2
SCSI id 3
SCSI id 4
SCSI id 5
SCSI id 6

No keyboard found. Using COM1 for input.
No boot authentication required

Opening File
"multi()net()server(192.168.1.73)clientip(192.168.1.147)brian26.prp"
Loading ...
loaded at:     00800400 00912F4C
relocated to:  00800000 00912B4C
zimage at:     0080A86C 00909B2E
avail ram:     00400000 00800000

Linux/PPC load: console=3DttyS0,9600 console=3Dtty0 panic=3D0 =
root=3D/dev/nfs
nfsroot=3D192.168.1.73:/export/nfsroot
ip=3D192.168.1.147:192.168.1.73::255.255.255.0::eth0
Uncompressing Linux...done.
Now booting the kernel
Total memory =3D 128MB; using 256kB for hash table (at c0240000)
Linux version 2.6.11 (brian@rex) (gcc version 3.4.1) #6 Mon Mar 7
15:50:16 PST 2005
PReP architecture
Built 1 zonelists
Kernel command line: console=3DttyS0,9600 console=3Dtty0 panic=3D0
root=3D/dev/nfs nfsroot=3D192.168.1.73:/export/nfsroot
ip=3D192.168.1.147:192.168.1.73::255.255.255.0::eth0
PID hash table entries: 1024 (order: 10, 16384 bytes)
TODC real-time-clock was stopped. Now starting...
time_init: decrementer frequency =3D 20.833333 MHz
Warning: real time clock seems stuck!
Console: colour dummy device 80x25
Dentry cache hash table entries: 32768 (order: 5, 131072 bytes)
Inode-cache hash table entries: 16384 (order: 4, 65536 bytes)
Memory: 127232k available (1512k kernel code, 640k data, 136k init, 0k
highmem)
Mount-cache hash table entries: 512 (order: 0, 4096 bytes)
NET: Registered protocol family 16
PCI: Probing PCI hardware
Setting PCI interrupts for a "Blackhawk (Powerstack)"
PCI: Cannot allocate resource region 0 of device 0000:00:0b.1
PCI: Cannot allocate resource region 1 of device 0000:00:0b.1
PCI: Cannot allocate resource region 2 of device 0000:00:0b.1
PCI: Cannot allocate resource region 3 of device 0000:00:0b.1
PCI: Cannot allocate resource region 4 of device 0000:00:0b.1
PCI: Cannot allocate resource region 5 of device 0000:00:0b.1
PCI: Cannot allocate resource region 0 of device 0000:00:0c.0
PCI: Cannot allocate resource region 0 of device 0000:00:0d.0
PCI: Cannot allocate resource region 0 of device 0000:00:0e.0
PCI: I/O Region 0000:00:0e.0/0 too large (4096 bytes)
PCI: I/O Region 0000:00:0e.0/0 too large (4096 bytes)
PCI: I/O Region 0000:00:0e.0/0 too large (4096 bytes)
PCI: I/O Region 0000:00:0e.0/0 too large (4096 bytes)
PCI: I/O Region 0000:00:0e.0/0 too large (4096 bytes)
PCI: I/O Region 0000:00:0e.0/0 too large (4096 bytes)
PCI: I/O Region 0000:00:0e.0/0 too large (4096 bytes)
PCI: I/O Region 0000:00:0e.0/0 too large (4096 bytes)
PCI: I/O Region 0000:00:0e.0/0 too large (4096 bytes)
PCI: I/O Region 0000:00:0e.0/0 too large (4096 bytes)
PCI: I/O Region 0000:00:0e.0/0 too large (4096 bytes)
PCI: I/O Region 0000:00:0e.0/0 too large (4096 bytes)
PCI: I/O Region 0000:00:0e.0/0 too large (4096 bytes)
Generic RTC Driver v1.07
serio: i8042 AUX port at 0x60,0x64 irq 12
serio: i8042 KBD port at 0x60,0x64 irq 1
Serial: 8250/16550 driver $Revision: 1.90 $ 8 ports, IRQ sharing
disabled
ttyS0 at I/O 0x3f8 (irq =3D 4) is a 16550A
ttyS1 at I/O 0x2f8 (irq =3D 3) is a 16550A
io scheduler noop registered
io scheduler anticipatory registered
io scheduler deadline registered
io scheduler cfq registered
Linux Tulip driver version 1.1.13 (May 11, 2002)
tulip0:  EEPROM default media type Autosense.
tulip0:  Index #0 - Media 10baseT (#0) described by a 21140 non-MII (0)
block.
tulip0:  Index #1 - Media 10base2 (#1) described by a <unknown> (8)
block.
tulip0:  Index #2 - Media 10baseT (#0) described by a 21140 non-MII (0)
block.
tulip0:  Index #3 - Media 10baseT (#0) described by a 21140 non-MII (0)
block.
eth0: Digital DS21143 Tulip rev 65 at 80001080, 00:80:8E:00:5D:5B, IRQ
0.
mice: PS/2 mouse device common for all mice
atkbd.c: keyboard reset failed on isa0060/serio1
atkbd.c: keyboard reset failed on isa0060/serio0
NET: Registered protocol family 2
IP: routing cache hash table of 1024 buckets, 8Kbytes
TCP established hash table entries: 8192 (order: 4, 65536 bytes)
TCP bind hash table entries: 8192 (order: 3, 32768 bytes)
TCP: Hash tables configured (established 8192 bind 8192)
NET: Registered protocol family 1
NET: Registered protocol family 17
IP-Config: Complete:
      device=3Deth0, addr=3D192.168.1.147, mask=3D255.255.255.0,
gw=3D255.255.255.255,
     host=3D192.168.1.147, domain=3D, nis-domain=3D(none),
     bootserver=3D192.168.1.73, rootserver=3D192.168.1.73, rootpath=3D
Looking up port of RPC 100003/2 on 192.168.1.73
portmap: server 192.168.1.73 not responding, timed out
Root-NFS: Unable to get nfsd port number from server, using default
Looking up port of RPC 100005/1 on 192.168.1.73
portmap: server 192.168.1.73 not responding, timed out
Root-NFS: Unable to get mountd port number from server, using default
NETDEV WATCHDOG: eth0: transmit timed out
eth0: 21140 transmit timed out, status f8678105, SIA 000000c5 ffff0001
fffbff7f 8ff04008, resetting...
eth0: transmit timed out, switching to 100baseTx media.
NETDEV WATCHDOG: eth0: transmit timed out
eth0: 21140 transmit timed out, status f8278517, SIA 000000cb ffff0001
fffbff7f 8ff04008, resetting...
eth0: transmit timed out, switching to 10baseT media.
NETDEV WATCHDOG: eth0: transmit timed out
eth0: 21140 transmit timed out, status f8678117, SIA 000000cb ffff0001
fffbff7f 8ff04008, resetting...
eth0: transmit timed out, switching to 10baseT media.
mount: server 192.168.1.73 not responding, timed out
Root-NFS: Server returned error -5 while mounting /export/nfsroot
VFS: Unable to mount root fs via NFS, trying floppy.
Kernel panic - not syncing: VFS: Unable to mount root fs on
unknown-block(2,0)
 <6>NETDEV WATCHDOG: eth0: transmit timed out
eth0: 21140 transmit timed out, status f8278517, SIA 000000cb ffff0001
fffbff7f 8ff04008, resetting...
eth0: transmit timed out, switching to 10baseT media.





Here is my .config file:=20

#
# Automatically generated make config: don't edit
# Linux kernel version: 2.6.11
# Mon Mar  7 15:44:49 2005
#
CONFIG_MMU=3Dy
CONFIG_GENERIC_HARDIRQS=3Dy
CONFIG_RWSEM_XCHGADD_ALGORITHM=3Dy
CONFIG_GENERIC_CALIBRATE_DELAY=3Dy
CONFIG_HAVE_DEC_LOCK=3Dy
CONFIG_PPC=3Dy
CONFIG_PPC32=3Dy
CONFIG_GENERIC_NVRAM=3Dy

#
# Code maturity level options
#
CONFIG_EXPERIMENTAL=3Dy
# CONFIG_CLEAN_COMPILE is not set
CONFIG_BROKEN=3Dy
CONFIG_BROKEN_ON_SMP=3Dy

#
# General setup
#
CONFIG_LOCALVERSION=3D""
CONFIG_SWAP=3Dy
CONFIG_SYSVIPC=3Dy
CONFIG_POSIX_MQUEUE=3Dy
CONFIG_BSD_PROCESS_ACCT=3Dy
# CONFIG_BSD_PROCESS_ACCT_V3 is not set
CONFIG_SYSCTL=3Dy
# CONFIG_AUDIT is not set
CONFIG_LOG_BUF_SHIFT=3D14
CONFIG_HOTPLUG=3Dy
CONFIG_KOBJECT_UEVENT=3Dy
CONFIG_IKCONFIG=3Dy
CONFIG_IKCONFIG_PROC=3Dy
# CONFIG_EMBEDDED is not set
CONFIG_KALLSYMS=3Dy
# CONFIG_KALLSYMS_ALL is not set
# CONFIG_KALLSYMS_EXTRA_PASS is not set
CONFIG_FUTEX=3Dy
CONFIG_EPOLL=3Dy
# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
CONFIG_SHMEM=3Dy
CONFIG_CC_ALIGN_FUNCTIONS=3D0
CONFIG_CC_ALIGN_LABELS=3D0
CONFIG_CC_ALIGN_LOOPS=3D0
CONFIG_CC_ALIGN_JUMPS=3D0
# CONFIG_TINY_SHMEM is not set

#
# Loadable module support
#
CONFIG_MODULES=3Dy
CONFIG_MODULE_UNLOAD=3Dy
# CONFIG_MODULE_FORCE_UNLOAD is not set
CONFIG_OBSOLETE_MODPARM=3Dy
CONFIG_MODVERSIONS=3Dy
CONFIG_MODULE_SRCVERSION_ALL=3Dy
CONFIG_KMOD=3Dy

#
# Processor
#
CONFIG_6xx=3Dy
# CONFIG_40x is not set
# CONFIG_44x is not set
# CONFIG_POWER3 is not set
# CONFIG_POWER4 is not set
# CONFIG_8xx is not set
# CONFIG_E500 is not set
# CONFIG_ALTIVEC is not set
# CONFIG_TAU is not set
# CONFIG_CPU_FREQ is not set
# CONFIG_PPC601_SYNC_FIX is not set
CONFIG_PPC_STD_MMU=3Dy

#
# Platform options
#
CONFIG_PPC_MULTIPLATFORM=3Dy
# CONFIG_APUS is not set
# CONFIG_KATANA is not set
# CONFIG_WILLOW is not set
# CONFIG_CPCI690 is not set
# CONFIG_PCORE is not set
# CONFIG_POWERPMC250 is not set
# CONFIG_CHESTNUT is not set
# CONFIG_SPRUCE is not set
# CONFIG_EV64260 is not set
# CONFIG_LOPEC is not set
# CONFIG_MCPN765 is not set
# CONFIG_MVME5100 is not set
# CONFIG_PPLUS is not set
# CONFIG_PRPMC750 is not set
# CONFIG_PRPMC800 is not set
# CONFIG_SANDPOINT is not set
# CONFIG_ADIR is not set
# CONFIG_K2 is not set
# CONFIG_PAL4 is not set
# CONFIG_GEMINI is not set
# CONFIG_EST8260 is not set
# CONFIG_SBC82xx is not set
# CONFIG_SBS8260 is not set
# CONFIG_RPX8260 is not set
# CONFIG_TQM8260 is not set
# CONFIG_ADS8272 is not set
# CONFIG_PQ2FADS is not set
# CONFIG_LITE5200 is not set
CONFIG_PPC_CHRP=3Dy
CONFIG_PPC_PMAC=3Dy
CONFIG_PPC_PREP=3Dy
CONFIG_PPC_OF=3Dy
CONFIG_PPCBUG_NVRAM=3Dy
# CONFIG_SMP is not set
# CONFIG_PREEMPT is not set
# CONFIG_HIGHMEM is not set
CONFIG_BINFMT_ELF=3Dy
# CONFIG_BINFMT_MISC is not set
# CONFIG_PROC_DEVICETREE is not set
CONFIG_PREP_RESIDUAL=3Dy
CONFIG_PROC_PREPRESIDUAL=3Dy
CONFIG_CMDLINE_BOOL=3Dy
CONFIG_CMDLINE=3D"console=3DttyS0,9600 console=3Dtty0 panic=3D0 =
root=3D/dev/nfs
nfsroot=3D192.168.1.73:/export/nfsroot
ip=3D192.168.1.147:192.168.1.73::255.255.255.0::eth0"

#
# Bus options
#
# CONFIG_ISA is not set
CONFIG_GENERIC_ISA_DMA=3Dy
CONFIG_PCI=3Dy
CONFIG_PCI_DOMAINS=3Dy
# CONFIG_PCI_LEGACY_PROC is not set
# CONFIG_PCI_NAMES is not set

#
# PCCARD (PCMCIA/CardBus) support
#
# CONFIG_PCCARD is not set

#
# PC-card bridges
#

#
# Advanced setup
#
# CONFIG_ADVANCED_OPTIONS is not set

#
# Default settings for advanced configuration options are used
#
CONFIG_HIGHMEM_START=3D0xfe000000
CONFIG_LOWMEM_SIZE=3D0x30000000
CONFIG_KERNEL_START=3D0xc0000000
CONFIG_TASK_SIZE=3D0x80000000
CONFIG_BOOT_LOAD=3D0x00800000

#
# Device Drivers
#

#
# Generic Driver Options
#
CONFIG_STANDALONE=3Dy
CONFIG_PREVENT_FIRMWARE_BUILD=3Dy
# CONFIG_FW_LOADER is not set
# CONFIG_DEBUG_DRIVER is not set

#
# Memory Technology Devices (MTD)
#
# CONFIG_MTD is not set

#
# Parallel port support
#
# CONFIG_PARPORT is not set

#
# Plug and Play support
#

#
# Block devices
#
# CONFIG_BLK_DEV_FD is not set
# CONFIG_MAC_FLOPPY is not set
# CONFIG_BLK_CPQ_DA is not set
# CONFIG_BLK_CPQ_CISS_DA is not set
# CONFIG_BLK_DEV_DAC960 is not set
# CONFIG_BLK_DEV_UMEM is not set
# CONFIG_BLK_DEV_COW_COMMON is not set
# CONFIG_BLK_DEV_LOOP is not set
# CONFIG_BLK_DEV_NBD is not set
# CONFIG_BLK_DEV_SX8 is not set
# CONFIG_BLK_DEV_RAM is not set
CONFIG_BLK_DEV_RAM_COUNT=3D16
CONFIG_INITRAMFS_SOURCE=3D""
# CONFIG_LBD is not set
# CONFIG_CDROM_PKTCDVD is not set

#
# IO Schedulers
#
CONFIG_IOSCHED_NOOP=3Dy
CONFIG_IOSCHED_AS=3Dy
CONFIG_IOSCHED_DEADLINE=3Dy
CONFIG_IOSCHED_CFQ=3Dy
# CONFIG_ATA_OVER_ETH is not set

#
# ATA/ATAPI/MFM/RLL support
#
# CONFIG_IDE is not set

#
# SCSI device support
#
CONFIG_SCSI=3Dm
CONFIG_SCSI_PROC_FS=3Dy

#
# SCSI support type (disk, tape, CD-ROM)
#
CONFIG_BLK_DEV_SD=3Dm
# CONFIG_CHR_DEV_ST is not set
# CONFIG_CHR_DEV_OSST is not set
# CONFIG_BLK_DEV_SR is not set
# CONFIG_CHR_DEV_SG is not set

#
# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
#
# CONFIG_SCSI_MULTI_LUN is not set
CONFIG_SCSI_CONSTANTS=3Dy
CONFIG_SCSI_LOGGING=3Dy

#
# SCSI Transport Attributes
#
CONFIG_SCSI_SPI_ATTRS=3Dm
# CONFIG_SCSI_FC_ATTRS is not set
# CONFIG_SCSI_ISCSI_ATTRS is not set

#
# SCSI low-level drivers
#
# CONFIG_BLK_DEV_3W_XXXX_RAID is not set
# CONFIG_SCSI_3W_9XXX is not set
# CONFIG_SCSI_ACARD is not set
# CONFIG_SCSI_AACRAID is not set
# CONFIG_SCSI_AIC7XXX is not set
# CONFIG_SCSI_AIC7XXX_OLD is not set
# CONFIG_SCSI_AIC79XX is not set
# CONFIG_SCSI_DPT_I2O is not set
# CONFIG_SCSI_ADVANSYS is not set
# CONFIG_MEGARAID_NEWGEN is not set
# CONFIG_MEGARAID_LEGACY is not set
# CONFIG_SCSI_SATA is not set
# CONFIG_SCSI_BUSLOGIC is not set
# CONFIG_SCSI_CPQFCTS is not set
# CONFIG_SCSI_DMX3191D is not set
# CONFIG_SCSI_EATA is not set
# CONFIG_SCSI_EATA_PIO is not set
# CONFIG_SCSI_FUTURE_DOMAIN is not set
# CONFIG_SCSI_GDTH is not set
# CONFIG_SCSI_IPS is not set
# CONFIG_SCSI_INITIO is not set
# CONFIG_SCSI_INIA100 is not set
CONFIG_SCSI_SYM53C8XX_2=3Dm
CONFIG_SCSI_SYM53C8XX_DMA_ADDRESSING_MODE=3D1
CONFIG_SCSI_SYM53C8XX_DEFAULT_TAGS=3D16
CONFIG_SCSI_SYM53C8XX_MAX_TAGS=3D64
# CONFIG_SCSI_SYM53C8XX_IOMAPPED is not set
# CONFIG_SCSI_IPR is not set
# CONFIG_SCSI_PCI2000 is not set
# CONFIG_SCSI_PCI2220I is not set
# CONFIG_SCSI_QLOGIC_ISP is not set
# CONFIG_SCSI_QLOGIC_FC is not set
# CONFIG_SCSI_QLOGIC_1280 is not set
CONFIG_SCSI_QLA2XXX=3Dm
# CONFIG_SCSI_QLA21XX is not set
# CONFIG_SCSI_QLA22XX is not set
# CONFIG_SCSI_QLA2300 is not set
# CONFIG_SCSI_QLA2322 is not set
# CONFIG_SCSI_QLA6312 is not set
# CONFIG_SCSI_DC395x is not set
# CONFIG_SCSI_DC390T is not set
# CONFIG_SCSI_NSP32 is not set
# CONFIG_SCSI_DEBUG is not set
# CONFIG_SCSI_MESH is not set
# CONFIG_SCSI_MAC53C94 is not set

#
# Multi-device support (RAID and LVM)
#
# CONFIG_MD is not set

#
# Fusion MPT device support
#
# CONFIG_FUSION is not set

#
# IEEE 1394 (FireWire) support
#
# CONFIG_IEEE1394 is not set

#
# I2O device support
#
# CONFIG_I2O is not set

#
# Macintosh device drivers
#
# CONFIG_ADB is not set
# CONFIG_ADB_CUDA is not set
# CONFIG_ADB_PMU is not set
# CONFIG_MAC_SERIAL is not set

#
# Networking support
#
CONFIG_NET=3Dy

#
# Networking options
#
CONFIG_PACKET=3Dy
# CONFIG_PACKET_MMAP is not set
# CONFIG_NETLINK_DEV is not set
CONFIG_UNIX=3Dy
# CONFIG_NET_KEY is not set
CONFIG_INET=3Dy
# CONFIG_IP_MULTICAST is not set
# CONFIG_IP_ADVANCED_ROUTER is not set
CONFIG_IP_PNP=3Dy
CONFIG_IP_PNP_DHCP=3Dy
CONFIG_IP_PNP_BOOTP=3Dy
CONFIG_IP_PNP_RARP=3Dy
# CONFIG_NET_IPIP is not set
# CONFIG_NET_IPGRE is not set
# CONFIG_ARPD is not set
# CONFIG_SYN_COOKIES is not set
# CONFIG_INET_AH is not set
# CONFIG_INET_ESP is not set
# CONFIG_INET_IPCOMP is not set
# CONFIG_INET_TUNNEL is not set
CONFIG_IP_TCPDIAG=3Dy
# CONFIG_IP_TCPDIAG_IPV6 is not set
# CONFIG_IPV6 is not set
# CONFIG_NETFILTER is not set

#
# SCTP Configuration (EXPERIMENTAL)
#
# CONFIG_IP_SCTP is not set
# CONFIG_ATM is not set
# CONFIG_BRIDGE is not set
# CONFIG_VLAN_8021Q is not set
# CONFIG_DECNET is not set
# CONFIG_LLC2 is not set
# CONFIG_IPX is not set
# CONFIG_ATALK is not set
# CONFIG_X25 is not set
# CONFIG_LAPB is not set
# CONFIG_NET_DIVERT is not set
# CONFIG_ECONET is not set
# CONFIG_WAN_ROUTER is not set

#
# QoS and/or fair queueing
#
# CONFIG_NET_SCHED is not set
# CONFIG_NET_CLS_ROUTE is not set

#
# Network testing
#
# CONFIG_NET_PKTGEN is not set
# CONFIG_NETPOLL is not set
# CONFIG_NET_POLL_CONTROLLER is not set
# CONFIG_HAMRADIO is not set
# CONFIG_IRDA is not set
# CONFIG_BT is not set
CONFIG_NETDEVICES=3Dy
# CONFIG_DUMMY is not set
# CONFIG_BONDING is not set
# CONFIG_EQUALIZER is not set
# CONFIG_TUN is not set

#
# ARCnet devices
#
# CONFIG_ARCNET is not set

#
# Ethernet (10 or 100Mbit)
#
CONFIG_NET_ETHERNET=3Dy
# CONFIG_MII is not set
# CONFIG_MACE is not set
# CONFIG_BMAC is not set
# CONFIG_OAKNET is not set
# CONFIG_HAPPYMEAL is not set
# CONFIG_SUNGEM is not set
# CONFIG_NET_VENDOR_3COM is not set

#
# Tulip family network device support
#
CONFIG_NET_TULIP=3Dy
# CONFIG_DE2104X is not set
CONFIG_TULIP=3Dy
# CONFIG_TULIP_MWI is not set
# CONFIG_TULIP_MMIO is not set
# CONFIG_TULIP_NAPI is not set
# CONFIG_DE4X5 is not set
# CONFIG_WINBOND_840 is not set
# CONFIG_DM9102 is not set
# CONFIG_HP100 is not set
# CONFIG_NET_PCI is not set

#
# Ethernet (1000 Mbit)
#
# CONFIG_ACENIC is not set
# CONFIG_DL2K is not set
# CONFIG_E1000 is not set
# CONFIG_NS83820 is not set
# CONFIG_HAMACHI is not set
# CONFIG_YELLOWFIN is not set
# CONFIG_R8169 is not set
# CONFIG_SK98LIN is not set
# CONFIG_TIGON3 is not set

#
# Ethernet (10000 Mbit)
#
# CONFIG_IXGB is not set
# CONFIG_S2IO is not set

#
# Token Ring devices
#
# CONFIG_TR is not set

#
# Wireless LAN (non-hamradio)
#
# CONFIG_NET_RADIO is not set

#
# Wan interfaces
#
# CONFIG_WAN is not set
# CONFIG_FDDI is not set
# CONFIG_HIPPI is not set
# CONFIG_PPP is not set
# CONFIG_SLIP is not set
# CONFIG_NET_FC is not set
# CONFIG_SHAPER is not set
# CONFIG_NETCONSOLE is not set

#
# ISDN subsystem
#
# CONFIG_ISDN is not set

#
# Telephony Support
#
# CONFIG_PHONE is not set

#
# Input device support
#
CONFIG_INPUT=3Dy

#
# Userland interfaces
#
CONFIG_INPUT_MOUSEDEV=3Dy
# CONFIG_INPUT_MOUSEDEV_PSAUX is not set
CONFIG_INPUT_MOUSEDEV_SCREEN_X=3D1024
CONFIG_INPUT_MOUSEDEV_SCREEN_Y=3D768
# CONFIG_INPUT_JOYDEV is not set
# CONFIG_INPUT_TSDEV is not set
# CONFIG_INPUT_EVDEV is not set
# CONFIG_INPUT_EVBUG is not set

#
# Input I/O drivers
#
# CONFIG_GAMEPORT is not set
CONFIG_SOUND_GAMEPORT=3Dy
CONFIG_SERIO=3Dy
CONFIG_SERIO_I8042=3Dy
# CONFIG_SERIO_SERPORT is not set
# CONFIG_SERIO_CT82C710 is not set
# CONFIG_SERIO_PCIPS2 is not set
CONFIG_SERIO_LIBPS2=3Dy
# CONFIG_SERIO_RAW is not set

#
# Input Device Drivers
#
CONFIG_INPUT_KEYBOARD=3Dy
CONFIG_KEYBOARD_ATKBD=3Dy
# CONFIG_KEYBOARD_SUNKBD is not set
# CONFIG_KEYBOARD_LKKBD is not set
# CONFIG_KEYBOARD_XTKBD is not set
# CONFIG_KEYBOARD_NEWTON is not set
# CONFIG_INPUT_MOUSE is not set
# CONFIG_INPUT_JOYSTICK is not set
# CONFIG_INPUT_TOUCHSCREEN is not set
# CONFIG_INPUT_MISC is not set

#
# Character devices
#
CONFIG_VT=3Dy
CONFIG_VT_CONSOLE=3Dy
CONFIG_HW_CONSOLE=3Dy
# CONFIG_SERIAL_NONSTANDARD is not set

#
# Serial drivers
#
CONFIG_SERIAL_8250=3Dy
CONFIG_SERIAL_8250_CONSOLE=3Dy
CONFIG_SERIAL_8250_NR_UARTS=3D4
# CONFIG_SERIAL_8250_EXTENDED is not set

#
# Non-8250 serial port support
#
CONFIG_SERIAL_CORE=3Dy
CONFIG_SERIAL_CORE_CONSOLE=3Dy
# CONFIG_SERIAL_PMACZILOG is not set
CONFIG_UNIX98_PTYS=3Dy
# CONFIG_LEGACY_PTYS is not set

#
# IPMI
#
# CONFIG_IPMI_HANDLER is not set

#
# Watchdog Cards
#
# CONFIG_WATCHDOG is not set
# CONFIG_NVRAM is not set
CONFIG_GEN_RTC=3Dy
# CONFIG_GEN_RTC_X is not set
# CONFIG_DTLK is not set
# CONFIG_R3964 is not set
# CONFIG_APPLICOM is not set

#
# Ftape, the floppy tape device driver
#
# CONFIG_AGP is not set
# CONFIG_DRM is not set
# CONFIG_RAW_DRIVER is not set

#
# I2C support
#
# CONFIG_I2C is not set

#
# Dallas's 1-wire bus
#
# CONFIG_W1 is not set

#
# Misc devices
#

#
# Multimedia devices
#
# CONFIG_VIDEO_DEV is not set

#
# Digital Video Broadcasting Devices
#
# CONFIG_DVB is not set

#
# Graphics support
#
# CONFIG_FB is not set

#
# Console display driver support
#
CONFIG_VGA_CONSOLE=3Dy
CONFIG_DUMMY_CONSOLE=3Dy

#
# Sound
#
# CONFIG_SOUND is not set

#
# USB support
#
# CONFIG_USB is not set
CONFIG_USB_ARCH_HAS_HCD=3Dy
CONFIG_USB_ARCH_HAS_OHCI=3Dy

#
# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' may also be
needed; see USB_STORAGE Help for more information
#

#
# USB Gadget Support
#
# CONFIG_USB_GADGET is not set

#
# MMC/SD Card support
#
# CONFIG_MMC is not set

#
# InfiniBand support
#
# CONFIG_INFINIBAND is not set

#
# File systems
#
# CONFIG_EXT2_FS is not set
# CONFIG_EXT3_FS is not set
# CONFIG_JBD is not set
# CONFIG_REISERFS_FS is not set
# CONFIG_JFS_FS is not set

#
# XFS support
#
# CONFIG_XFS_FS is not set
# CONFIG_MINIX_FS is not set
# CONFIG_ROMFS_FS is not set
# CONFIG_QUOTA is not set
CONFIG_DNOTIFY=3Dy
# CONFIG_AUTOFS_FS is not set
# CONFIG_AUTOFS4_FS is not set

#
# CD-ROM/DVD Filesystems
#
# CONFIG_ISO9660_FS is not set
# CONFIG_UDF_FS is not set

#
# DOS/FAT/NT Filesystems
#
# CONFIG_MSDOS_FS is not set
# CONFIG_VFAT_FS is not set
# CONFIG_NTFS_FS is not set

#
# Pseudo filesystems
#
CONFIG_PROC_FS=3Dy
CONFIG_PROC_KCORE=3Dy
CONFIG_SYSFS=3Dy
# CONFIG_DEVFS_FS is not set
# CONFIG_DEVPTS_FS_XATTR is not set
CONFIG_TMPFS=3Dy
# CONFIG_TMPFS_XATTR is not set
# CONFIG_HUGETLBFS is not set
# CONFIG_HUGETLB_PAGE is not set
CONFIG_RAMFS=3Dy

#
# Miscellaneous filesystems
#
# CONFIG_ADFS_FS is not set
# CONFIG_AFFS_FS is not set
# CONFIG_HFS_FS is not set
# CONFIG_HFSPLUS_FS is not set
# CONFIG_BEFS_FS is not set
# CONFIG_BFS_FS is not set
# CONFIG_EFS_FS is not set
# CONFIG_CRAMFS is not set
# CONFIG_VXFS_FS is not set
# CONFIG_HPFS_FS is not set
# CONFIG_QNX4FS_FS is not set
# CONFIG_SYSV_FS is not set
# CONFIG_UFS_FS is not set

#
# Network File Systems
#
CONFIG_NFS_FS=3Dy
CONFIG_NFS_V3=3Dy
# CONFIG_NFS_V4 is not set
# CONFIG_NFS_DIRECTIO is not set
# CONFIG_NFSD is not set
CONFIG_ROOT_NFS=3Dy
CONFIG_LOCKD=3Dy
CONFIG_LOCKD_V4=3Dy
CONFIG_SUNRPC=3Dy
# CONFIG_RPCSEC_GSS_KRB5 is not set
# CONFIG_RPCSEC_GSS_SPKM3 is not set
# CONFIG_SMB_FS is not set
# CONFIG_CIFS is not set
# CONFIG_NCP_FS is not set
# CONFIG_CODA_FS is not set
# CONFIG_AFS_FS is not set

#
# Partition Types
#
# CONFIG_PARTITION_ADVANCED is not set
CONFIG_MSDOS_PARTITION=3Dy

#
# Native Language Support
#
# CONFIG_NLS is not set

#
# Library routines
#
# CONFIG_CRC_CCITT is not set
CONFIG_CRC32=3Dy
# CONFIG_LIBCRC32C is not set

#
# Profiling support
#
# CONFIG_PROFILING is not set

#
# Kernel hacking
#
CONFIG_DEBUG_KERNEL=3Dy
CONFIG_MAGIC_SYSRQ=3Dy
# CONFIG_SCHEDSTATS is not set
# CONFIG_DEBUG_SLAB is not set
# CONFIG_DEBUG_SPINLOCK is not set
# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
# CONFIG_DEBUG_KOBJECT is not set
# CONFIG_DEBUG_INFO is not set
# CONFIG_DEBUG_FS is not set
# CONFIG_KGDB is not set
CONFIG_XMON=3Dy
# CONFIG_BDI_SWITCH is not set
CONFIG_BOOTX_TEXT=3Dy

#
# Security options
#
# CONFIG_KEYS is not set
# CONFIG_SECURITY is not set

#
# Cryptographic options
#
# CONFIG_CRYPTO is not set

#
# Hardware crypto devices
#

Re: 2.6.11 prep image on radstone ppc4a not booting

[Christian]

-----BEGIN PGP SIGNED MESSAGE-----
Hash: SHA1

Brian V. Madzarevic wrote:
> Setting PCI interrupts for a "Blackhawk (Powerstack)"
> PCI: Cannot allocate resource region 0 of device 0000:00:0b.1
[...]

i don't know about these, hopefully the ppc gurus could explain these
messages.

> Linux Tulip driver version 1.1.13 (May 11, 2002)
> tulip0:  EEPROM default media type Autosense.
- --^

did you try the de4x5 driver instead of the tulip one? if not...

> CONFIG_NET_TULIP=y
> # CONFIG_DE2104X is not set
> CONFIG_TULIP=y
> # CONFIG_TULIP_MWI is not set
> # CONFIG_TULIP_MMIO is not set
> # CONFIG_TULIP_NAPI is not set
> # CONFIG_DE4X5 is not set
- ----^
here it is ;)
could be worth a try.

Christian.
- --
BOFH excuse #80:

That's a great computer you have there; have you considered how it would
work as a BSD machine?
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.0 (GNU/Linux)
Comment: Using GnuPG with Thunderbird - http://enigmail.mozdev.org

iD8DBQFCMxn/C/PVm5+NVoYRAk1mAKCKCWXxlrHg031uktVx4BxtEMwePACg4hDq
muiR9Exk06I4vS0Xb4L4S3w=
=dqrh
-----END PGP SIGNATURE-----

Re: 2.6.11 prep image on radstone ppc4a not booting

[Sven Luther]

On Tue, Mar 08, 2005 at 10:11:31AM -0800, Brian V. Madzarevic wrote:
> I am trying to boot a Linux 2.6.11 prep image on a Radstone PPC4A.
> PPC4A Specifications http://www.radstone.com/rtcd/pdfs/ppc4a.pdf

Did it use to work with older kernels ? 

This may be another problem of badly specified irqs like we had with the
motorola powerstacks. See the mailing list archive about this issues.

Friendly,

Sven Luther

2.6.11 prep powerstack and sym53c8xx brokeness (was Re: 2.6.11 prep image on radstone ppc4a not booting)

[Sven Luther]

On Tue, Mar 08, 2005 at 10:11:31AM -0800, Brian V. Madzarevic wrote:
> I am trying to boot a Linux 2.6.11 prep image on a Radstone PPC4A.
> PPC4A Specifications http://www.radstone.com/rtcd/pdfs/ppc4a.pdf
> 
> I was trying to get an nfs filesystem mounted, but after the bios
> retrieves the kernel using tftp, no more packets are even sent out.  I
> don't know if there is a problem with the network driver or the PCI bus
> or what.

By the way, i can confirm that the 2.6.11 kernels seem to be broken on
motorola powerstack, due to the sym53c8xx driver which was already mentioned
previously i think.

Any hint on this ? 

Friendly,

Sven Luther