All of lore.kernel.org
 help / color / mirror / Atom feed
From: Pavel Machek <pavel-+ZI9xUNit7I@public.gmane.org>
To: Norbert Preining <preining-DX+603jRYB8@public.gmane.org>
Cc: Andrew Morton <akpm-3NddpPZAyC0@public.gmane.org>,
	linux-kernel-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
	acpi-devel-5NWGOfrQmneRv+LV9MX5uipxlwaOVQ5f@public.gmane.org
Subject: Re: It's getting worse: 2.6.12-rc2-mm1 and suspend2ram
Date: Tue, 5 Apr 2005 22:41:07 +0200	[thread overview]
Message-ID: <20050405204107.GD1380@elf.ucw.cz> (raw)
In-Reply-To: <20050405181628.GB6879-DqSSrKF0TaySnEC3TeqHn5dqbFPxfnh/@public.gmane.org>

Hi!

> Dear Andrew, dear Pavel, dear developers!
> 
> WIth 2.6.12-rc2-mm1 I cannot resume, and the laptop not even freezes, it
> immediately goes into reboot when resuming (suspend did work, well it
> looks like).
> 
> I booted into single user mode, stopped all programs (I could), unloaded
> all modules (I could), and then suspended, with the same result. In this
> single user mode my lsmod looked like this:
> 
> Module                  Size  Used by
> yenta_socket           18952  1 
> rsrc_nonstatic         11264  1 yenta_socket
> pcmcia_core            34704  2 yenta_socket,rsrc_nonstatic
> intel_agp              18844  1 
> agpgart                28488  1 intel_agp
> 
> and my ps -ax:
>   PID TTY      STAT   TIME COMMAND
>     1 ?        S      0:00 init [S]          
>     2 ?        SN     0:00 [ksoftirqd/0]
>     3 ?        S      0:00 [watchdog/0]
>     4 ?        S<     0:00 [events/0]
>     5 ?        S<     0:00 [khelper]
>     6 ?        S<     0:00 [kthread]
>     8 ?        S<     0:00 [kacpid]
>    98 ?        S<     0:00 [kblockd/0]
>   153 ?        S      0:00 [pdflush]
>   154 ?        S      0:00 [pdflush]
>   156 ?        S<     0:00 [aio/0]
>   155 ?        S      0:00 [kswapd0]
>   231 ?        S      0:00 [kseriod]
>   301 ?        S      0:00 [kjournald]
>   379 ?        S<s    0:00 udevd
>  2623 ?        S      0:00 [pccardd]
>  2634 ?        S      0:00 [pccardd]
>  3511 tty1     Ss     0:00 init [S]          
>  3516 tty1     S      0:00 bash
>  4417 tty1     R+     0:00 ps ax
> 
> It is interesting that I cannot unload the agp stuff, although to my
> eyes there is nothing which really is using the agp stuff (or is it
> udevd?). For the yenta/pcmcia I couldn't stop pccardd.
> 
> I though about trying to weed out my config, but I don't know where to
> start. I attach my config file, please comment on what I should leave
> out of the kernel for further testing.

I do not know why you can't unload them, but what about simply not
loading them at all? :-).

Or just rm -f them, it is hard to load module that is not there
;^))). Or init=/bin/bash....
								Pavel
-- 
People were complaining that M$ turns users into beta-testers...
...jr ghea gurz vagb qrirybcref, naq gurl frrz gb yvxr vg gung jnl!


-------------------------------------------------------
SF email is sponsored by - The IT Product Guide
Read honest & candid reviews on hundreds of IT Products from real users.
Discover which products truly live up to the hype. Start reading now.
http://ads.osdn.com/?ad_id=6595&alloc_id=14396&op=click

WARNING: multiple messages have this Message-ID (diff)
From: Pavel Machek <pavel@ucw.cz>
To: Norbert Preining <preining@logic.at>
Cc: Andrew Morton <akpm@osdl.org>,
	linux-kernel@vger.kernel.org, acpi-devel@lists.sourceforge.net
Subject: Re: It's getting worse: 2.6.12-rc2-mm1 and suspend2ram
Date: Tue, 5 Apr 2005 22:41:07 +0200	[thread overview]
Message-ID: <20050405204107.GD1380@elf.ucw.cz> (raw)
In-Reply-To: <20050405181628.GB6879@gamma.logic.tuwien.ac.at>

Hi!

> Dear Andrew, dear Pavel, dear developers!
> 
> WIth 2.6.12-rc2-mm1 I cannot resume, and the laptop not even freezes, it
> immediately goes into reboot when resuming (suspend did work, well it
> looks like).
> 
> I booted into single user mode, stopped all programs (I could), unloaded
> all modules (I could), and then suspended, with the same result. In this
> single user mode my lsmod looked like this:
> 
> Module                  Size  Used by
> yenta_socket           18952  1 
> rsrc_nonstatic         11264  1 yenta_socket
> pcmcia_core            34704  2 yenta_socket,rsrc_nonstatic
> intel_agp              18844  1 
> agpgart                28488  1 intel_agp
> 
> and my ps -ax:
>   PID TTY      STAT   TIME COMMAND
>     1 ?        S      0:00 init [S]          
>     2 ?        SN     0:00 [ksoftirqd/0]
>     3 ?        S      0:00 [watchdog/0]
>     4 ?        S<     0:00 [events/0]
>     5 ?        S<     0:00 [khelper]
>     6 ?        S<     0:00 [kthread]
>     8 ?        S<     0:00 [kacpid]
>    98 ?        S<     0:00 [kblockd/0]
>   153 ?        S      0:00 [pdflush]
>   154 ?        S      0:00 [pdflush]
>   156 ?        S<     0:00 [aio/0]
>   155 ?        S      0:00 [kswapd0]
>   231 ?        S      0:00 [kseriod]
>   301 ?        S      0:00 [kjournald]
>   379 ?        S<s    0:00 udevd
>  2623 ?        S      0:00 [pccardd]
>  2634 ?        S      0:00 [pccardd]
>  3511 tty1     Ss     0:00 init [S]          
>  3516 tty1     S      0:00 bash
>  4417 tty1     R+     0:00 ps ax
> 
> It is interesting that I cannot unload the agp stuff, although to my
> eyes there is nothing which really is using the agp stuff (or is it
> udevd?). For the yenta/pcmcia I couldn't stop pccardd.
> 
> I though about trying to weed out my config, but I don't know where to
> start. I attach my config file, please comment on what I should leave
> out of the kernel for further testing.

I do not know why you can't unload them, but what about simply not
loading them at all? :-).

Or just rm -f them, it is hard to load module that is not there
;^))). Or init=/bin/bash....
								Pavel
-- 
People were complaining that M$ turns users into beta-testers...
...jr ghea gurz vagb qrirybcref, naq gurl frrz gb yvxr vg gung jnl!

  parent reply	other threads:[~2005-04-05 20:41 UTC|newest]

Thread overview: 15+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2005-04-05 18:16 It's getting worse: 2.6.12-rc2-mm1 and suspend2ram Norbert Preining
2005-04-05 18:16 ` Norbert Preining
     [not found] ` <20050405181628.GB6879-DqSSrKF0TaySnEC3TeqHn5dqbFPxfnh/@public.gmane.org>
2005-04-05 20:41   ` Pavel Machek [this message]
2005-04-05 20:41     ` Pavel Machek
     [not found]     ` <20050405204107.GD1380-I/5MKhXcvmPrBKCeMvbIDA@public.gmane.org>
2005-04-05 21:00       ` Norbert Preining
2005-04-05 21:00         ` [ACPI] " Norbert Preining
     [not found]         ` <20050405210041.GA16263-DqSSrKF0TaySnEC3TeqHn5dqbFPxfnh/@public.gmane.org>
2005-04-05 21:13           ` Pavel Machek
2005-04-05 21:13             ` [ACPI] " Pavel Machek
     [not found]             ` <20050405211340.GF1380-I/5MKhXcvmPrBKCeMvbIDA@public.gmane.org>
2005-04-05 21:18               ` Norbert Preining
2005-04-05 21:18                 ` [ACPI] " Norbert Preining
2005-04-05 22:19             ` Norbert Preining
     [not found]               ` <20050405221903.GA21196-DqSSrKF0TaySnEC3TeqHn5dqbFPxfnh/@public.gmane.org>
2005-04-06  1:31                 ` Andrew Morton
2005-04-06  1:31                   ` [ACPI] " Andrew Morton
     [not found]                   ` <20050405183144.50ed3a9c.akpm-3NddpPZAyC0@public.gmane.org>
2005-04-06 12:39                     ` Norbert Preining
2005-04-06 12:39                       ` [ACPI] " Norbert Preining

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20050405204107.GD1380@elf.ucw.cz \
    --to=pavel-+zi9xunit7i@public.gmane.org \
    --cc=acpi-devel-5NWGOfrQmneRv+LV9MX5uipxlwaOVQ5f@public.gmane.org \
    --cc=akpm-3NddpPZAyC0@public.gmane.org \
    --cc=linux-kernel-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
    --cc=preining-DX+603jRYB8@public.gmane.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.