* 2.6.12-rc2-mm2
@ 2005-04-08 10:08 Andrew Morton
2005-04-08 11:46 ` 2.6.12-rc2-mm2 Rafael J. Wysocki
` (9 more replies)
0 siblings, 10 replies; 27+ messages in thread
From: Andrew Morton @ 2005-04-08 10:08 UTC (permalink / raw)
To: linux-kernel
ftp://ftp.kernel.org/pub/linux/kernel/people/akpm/patches/2.6/2.6.12-rc2/2.6.12-rc2-mm2/
- Although small, bk-audit.patch was causing conflits with a couple of
other projects. Dropped for now.
- Greg is not using bk now, so bk-pci.patch, bk-i2c.patch,
bk-driver-core.patch and bk-usb.patch have been replaced with gregkh-*.patch
in -mm.
- Largeish x86_64 update
- CPU scheduler updates
- The bk-acpi patch here causes my ia64 test box to hang during boot
Changes since 2.6.12-rc2-mm1:
bk-acpi.patch
bk-agpgart.patch
bk-cifs.patch
bk-cpufreq.patch
bk-cryptodev.patch
gregkh-driver.patch
bk-drm.patch
bk-drm-via.patch
bk-ia64.patch
bk-input.patch
bk-jfs.patch
bk-kbuild.patch
bk-kconfig.patch
bk-mtd.patch
bk-netdev.patch
bk-nfs.patch
bk-ntfs.patch
gregkh-pci.patch
bk-scsi.patch
gregkh-usb.patch
bk-watchdog.patch
Latest versions of subsystem trees
-fix-typo-in-scdrv_init.patch
-export-platform_add_devices.patch
-pci-pci-transparent-bridge-handling-improvements-pci-core.patch
-usb_cdc-build-fix.patch
-usb-resume-fixes.patch
-usb-suspend-updates-interface-suspend.patch
-hcd-suspend-uses-pm_message_t.patch
-usb-support-for-new-ipod-mini-and-possibly-others.patch
Merged
+fix-acl-oops.patch
ACL fix
+sysenter-irq-atomicity-fix.patch
+sysenter-irq-atomicity-fix-fix.patch
Fix sysenter stack stomping. Not the final version of this.
+fix-get_compat_sigevent.patch
compat fix
+fix-bug-4395-modprobe-bttv-freezes-the-computer.patch
bttv fix
+selinux-fix-bug-in-netlink-message-type-detection.patch
SELinux fix
+r128_statec-break-missing-in-switch-statement.patch
DRM fix
+no-acpi-build-fix.patch
+drivers-firmware-pcdpc-build-fix.patch
ACPI fixes
+add-cxt48-to-modem-black-list-in-ac97.patch
Sound driver fix
+bk-driver-core-usb-klist_node_attached-fix.patch
Fix to gregkh-driver.patch
+remove-redundancy-from-i2c-corec.patch
gregkh-i2c.patch fix
+bk-kbuild-cvs-fixes.patch
+biarch-compiler-support-for-i386.patch
bk-kbuild fixes
+usb-storage-debugc-missing-include.patch
usb fix
-add-a-clear_pages-function-to-clear-pages-of-higher.patch
Dropped - didn't seem to gain much.
+freepgt2-free_pgtables-from-first_user_address.patch
+freepgt2-sys_mincore-ignore-first_user_pgd_nr.patch
+freepgt2-arm-first_user_address-page_size.patch
+freepgt2-arm26-first_user_address-page_size.patch
+freepgt2-arch-first_user_address-0.patch
+freepgt2-remove-first_user_address-hack.patch
Core mm cleanups
+sparsemem-fix-minor-defaults-issue-in-mm-kconfig.patch
sparsemem Kconfig changes
+chelsio-build-fix.patch
net driver build fix
+fix-linux-atalkh-header.patch
+dont-call-kmem_cache_create-with-a-spinlock-held.patch
+fix-dst_destroy-race.patch
+irda_device-oops-fix.patch
net fixes
+selinux-add-support-for-netlink_kobject_uevent.patch
SELinux feature work
-ppc32-fix-errata-for-some-g3-cpus.patch
This seemed to be buggy.
+ppc32-fix-agp-and-sleep-again.patch
+ppc32-fix-pte_update-for-64-bit-ptes.patch
+ppc32-make-usage-of-config_pte_64bit-config_phys_64bit.patch
+ppc32-allow-adjust-of-pfn-offset-in-pte.patch
+ppc32-support-36-bit-physical-addressing-on-e500.patch
+ppc32-fix-errata-for-some-g3-cpus.patch
+ppc32-fix-mpc8xx-watchdog.patch
ppc32 updates
+ppc64-fix-export-of-wrong-symbol.patch
+ppc64-kconfig-memory-models.patch
+ppc64-improve-mapping-of-vdso.patch
+ppc64-detect-altivec-via-firmware-on-unknown-cpus.patch
+ppc64-remove-bogus-f50-hack-in-promc.patch
ppc64 updates
+mips-remove-include-linux-audith-two.patch
MIPS fix
-sched-x86-sched_clock-to-use-tsc-on-config_hpet-or-config_numa-systems.patch
Broken.
+irq-and-pci_ids-patch-for-intel-esb2.patch
+piix-ide-pata-patch-for-intel-esb2.patch
+intel8x0-ac97-audio-patch-for-intel-esb2.patch
+ata_piix-ide-mode-sata-patch-for-intel-esb2.patch
+ahci-ahci-mode-sata-patch-for-intel-esb2.patch
+i2c-i801-i2c-patch-for-intel-esb2.patch
Intel ESB2 updates
+x86_64-disable-interrupts-during-smp-bogomips-checking.patch
+x86_64-genapic-update.patch
+x86_64-make-irda-devices-are-not-really-isa-devices-not.patch
+x86_64-from-i386-originally-from-linus.patch
+x86_64-some-fixes-for-single-step-handling.patch
+x86_64-handle-programs-that-set-tf-in-user-space-using.patch
+x86_64-use-a-common-function-to-find-code-segment-bases.patch
+x86_64-use-a-common-function-to-find-code-segment-bases-fix.patch
+x86_64-dump-stack-and-prevent-recursion-on-early-fault.patch
+x86_64-fix-interaction-of-single-stepping-with-debuggers.patch
+x86_64-minor-microoptimization-in-syscall-entry-slow-path.patch
+x86_64-call-do_notify_resume-unconditionally-in-entrys.patch
+x86_64-regularize-exception-stack-handling.patch
+x86_64-fix-a-small-missing-schedule-race.patch
+x86_64-remove-unused-macro-in-preempt-support.patch
+x86_64-support-constantly-ticking-tscs.patch
+x86_64-make-kernel-math-errors-a-die-now.patch
+x86_64-dont-assume-future-amd-cpus-have-k8-compatible.patch
+x86_64-correct-wrong-comment-in-localh.patch
+x86_64-use-the-extended-rip-msr-for-machine-check.patch
+x86_64-remove-excessive-stack-allocation-in-mce-code.patch
+x86_64-always-use-cpuid-80000008-to-figure-out-mtrr.patch
+x86_64-port-over-e820-gap-detection-from-i386.patch
+x86_64-use-the-e820-hole-to-map-the-iommu-agp-aperture.patch
+x86_64-keep-only-a-single-debug-notifier-chain.patch
+x86_64-remove-duplicated-syscall-entry.patch
+x86_64-adds-support-for-intel-dual-core-detection-and-displaying.patch
+x86_64-final-support-for-amd-dual-core.patch
+x86_64-final-support-for-amd-dual-core-fix.patch
+x86_64-rewrite-exception-stack-backtracing.patch
+x86_64-add-acpi_skip_timer_override-option.patch
+x86_64-rename-the-extended-cpuid-level-field.patch
+x86_64-switch-smp-bootup-over-to-new-cpu-hotplug-state.patch
+x86_64-switch-smp-bootup-over-to-new-cpu-hotplug-state-fix.patch
x86_64 update
-x86-x86_64-intel-dual-core-detection.patch
-x86_64-genapic-update.patch
Drop these - I think Andi has implemented this by other means.
+power-videotxt-update-documentation-with-more-systems.patch
+fix-u32-vs-pm_message_t-in-drivers.patch
+fix-u32-vs-pm_message_t-in-driver-video.patch
+fix-u32-vs-pm_message_t-in-rest-of-the-tree.patch
Power management updates
+kernel-softlockup-fix-usage-of-msleep_interruptible.patch
Clean up detect-soft-lockups.patch
+possible-use-after-free-of-bio.patch
block layer fix
-some-changes-and-extensions-to-the-kernel-documentation.patch
Dropped - it's now in docbook-*.patch
+opl3sa2-module_parm_desc.patch
module parameter fix
+con_consdev-bit-not-set-correctly-on-last-console.patch
console handling fix
+update-maintainer-for-dev-random.patch
random driver maintainer update
+add-dontdiff-file.patch
Add a standard dontdiff file.
+ib-mthca-add-support-for-new-mt25204-hca-fix.patch
Fix ib-mthca-add-support-for-new-mt25204-hca.patch
+ext3-remove-unnecessary-race-then-retry-in-ext3_get_block.patch
+ext3-remove-unnecessary-race-then-retry-in-ext3_get_block-leak-fix.patch
Remove some unneeded ext3 logic
+nfsd-clear-signals-before-exiting-the-nfsd-thread.patch
+nfsd4-callback-create-rpc-client-returns.patch
+nfsd4-fix-struct-file-leak.patch
+nfsd4-find_delegation_file.patch
+nfsd4-nfs4_check_delegmode.patch
+nfsd4-dont-reopen-for-delegated-client.patch
+nfsd4-add-open-state-code-for-claim_delegate_cur.patch
+nfsd4-support-claim_delegate_cur.patch
+nfsd4-fix-fh_expire_type.patch
+nfsd4-block-metadata-ops-during-grace-period.patch
+nfsd4-slabify-nfs4_files.patch
+nfsd4-slabify-stateids.patch
+nfsd4-slabify-delegations.patch
+nfsd4-remove-debugging-counters.patch
+nfsd4-rename-nfs4_file-fields.patch
+nfsd4-reference-count-struct-nfs4_file.patch
nfs server udpates
-sched-remove-unnecessary-sched-domains.patch
-sched-improve-pinned-task-handling-again.patch
+sched-null-domains.patch
+sched-remove-degenerate-domains.patch
+sched-multilevel-sbe-sbf.patch
+sched-rcu-domains.patch
+sched-consolidate-sbe-sbf.patch
+sched-consolidate-sbe-sbf-fix.patch
CPU scheduler updates
+serial-mri-mri-pcids1-dual-port-serial-card.patch
Additional serial driver support
+md-close-a-small-race-in-md-thread-deregistration.patch
+md-remove-a-number-of-misleading-calls-to-md_bug.patch
RAID update
+docbook-changes-and-extensions-to-the-kernel-documentation.patch
+docbook-fix-void-xml-tag.patch
+docbook-fix-some-descriptions.patch
+docbook-use-informalexample-for-examples.patch
+docbook-remove-obsolete-templates.patch
+docbook-use-xmlto-to-process-the-docbook-files.patch
kerneldoc fixes
+sound-oss-cleanups-fix.patch
Fix sound-oss-cleanups.patch for gcc4.
number of patches in -mm: 746
number of changesets in external trees: 643
number of patches in -mm only: 724
total patches: 1367
All 746 patches:
fix-acl-oops.patch
Fix acl Oops
sysenter-irq-atomicity-fix.patch
sysenter IRQ atomicity fix
sysenter-irq-atomicity-fix-fix.patch
sysenter-irq-atomicity-fix-fix
fix-get_compat_sigevent.patch
: Fix get_compat_sigevent()
fix-bug-4395-modprobe-bttv-freezes-the-computer.patch
fix Bug 4395: modprobe bttv freezes the computer
selinux-fix-bug-in-netlink-message-type-detection.patch
SELinux: fix bug in Netlink message type detection
r128_statec-break-missing-in-switch-statement.patch
r128_state.c: break missing in switch statement
bk-acpi.patch
bk-acpi-alpha-build-fix.patch
bk-acpi alpha build fix
acpi-toshiba-failure-handling.patch
acpi: Toshiba failure handling
acpi-video-pointer-size-fix.patch
acpi video pointer size fix
no-acpi-build-fix.patch
CONFIG_ACPI=n build fix
drivers-firmware-pcdpc-build-fix.patch
drivers/firmware/pcdp.c build fix
bk-agpgart.patch
agp-fix-for-xen-vmm.patch
AGP fix for Xen VMM
fix-agp-code-to-work-again-with-non-pci-agp-bridges.patch
fix AGP code to work again with non-PCI AGP bridges
include-linux-soundcardh-endianness-fix.patch
include/linux/soundcard.h: endianness fix
add-cxt48-to-modem-black-list-in-ac97.patch
Add CXT48 to modem black list in ac97
bk-cifs.patch
bk-cpufreq.patch
add-suspend-method-to-cpufreq-core.patch
Add suspend method to cpufreq core
add-suspend-method-to-cpufreq-core-warning-fix.patch
add-suspend-method-to-cpufreq-core-warning-fix
powernow-k7recalibrate-cpu_khz.patch
powernowk7: recalibrate cpu_khz
cpufreq-timers-recalibrate_cpu_khz.patch
cpufreq timers: recalibrate cpu_khz
bk-cryptodev.patch
gregkh-driver.patch
bk-driver-core-usb-klist_node_attached-fix.patch
usb: klist_node_attached() fix
fix-ver_linux-script-for-no-udev-utils.patch
Fix ver_linux script for no udev utils.
bk-drm.patch
bk-drm-via.patch
gregkh-i2c.patch
remove-redundancy-from-i2c-corec.patch
Remove redundancy from i2c-core.c
bk-ia64.patch
bk-driver-core-sn2-build-fix.patch
bk-driver-core sn build fix
quiet-ide-cd-warning.patch
quiet ide-cd warning
bk-input.patch
alps-printk-tidy.patch
alps-printk-tidy
serio-resume-fix.patch
serio resume fix
alps-resume-fix.patch
ALPS resume fix
serport-oops-fix.patch
serport oops fix
serio-id-attributes.patch
serio 'id' attributes
bk-jfs.patch
bk-kbuild.patch
bk-kbuild-cvs-fixes.patch
bk-kbuild cvs fixes
biarch-compiler-support-for-i386.patch
biarch compiler support for i386
use-cross_compileinstallkernel-in-arch-boot-installsh.patch
use ${CROSS_COMPILE}installkernel in arch/*/boot/install.sh
bk-kconfig.patch
kconfig-i18n-support.patch
Kconfig i18n support
libata-flush-comreset-set-and-clear.patch
libata: flush COMRESET set and clear
bk-mtd.patch
bk-netdev.patch
tulip-fix-for-64-bit-mips.patch
tulip: fix for 64-bit mips
pcnet_csc-irq-handler-optimization.patch
pcnet_cs.c: IRQ handler optimization
bk-nfs.patch
bk-ntfs.patch
gregkh-pci.patch
pci_module_init-pci_register_driver.patch
pci_module_init -> pci_register_driver
pci-pci-transparent-bridge-handling-improvements-yenta_socket.patch
PCI-PCI transparent bridge handling improvements (yenta_socket)
acpi-bridge-hotadd-acpi-based-root-bridge-hot-add.patch
acpi bridge hotadd: ACPI based root bridge hot-add
acpi-bridge-hotadd-fix-pci_enable_device-for-p2p-bridges.patch
acpi bridge hotadd: Fix pci_enable_device() for p2p bridges
acpi-bridge-hotadd-make-pcibios_fixup_bus-hot-plug-safe.patch
acpi bridge hotadd: Make pcibios_fixup_bus() hot-plug safe
acpi-bridge-hotadd-prevent-duplicate-bus-numbers-when-scanning-pci-bridge.patch
acpi bridge hotadd: Prevent duplicate bus numbers when scanning PCI bridge
acpi-bridge-hotadd-take-the-pci-lock-when-modifying-pci-bus-or-device-lists.patch
acpi bridge hotadd: Take the PCI lock when modifying pci bus or device lists
acpi-bridge-hotadd-link-newly-created-pci-child-bus-to-its-parent-on-creation.patch
acpi bridge hotadd: Link newly created pci child bus to its parent on creation
acpi-bridge-hotadd-make-the-pci-remove-routines-safe-for-failed-hot-plug.patch
acpi bridge hotadd: Make the PCI remove routines safe for failed hot-plug
acpi-bridge-hotadd-remove-hot-plugged-devices-that-could-not-be-allocated-resources.patch
acpi bridge hotadd: Remove hot-plugged devices that could not be allocated resources
acpi-bridge-hotadd-read-bridge-resources-when-fixing-up-the-bus.patch
acpi bridge hotadd: Read bridge resources when fixing up the bus
acpi-bridge-hotadd-allow-acpi-add-and-start-operations-to-be-done-independently.patch
acpi bridge hotadd: Allow ACPI .add and .start operations to be done independently
acpi-bridge-hotadd-export-the-interface-to-get-pci-id-for-an-acpi-handle.patch
acpi bridge hotadd: Export the interface to get PCI id for an ACPI handle
bk-scsi.patch
megaraid_sas-announcing-new-module-for.patch
megaraid_sas: new module for LSI Logic's SAS based MegaRAID controllers
add-scsi-changer-driver.patch
add scsi changer driver
scsi-ch-build-fix.patch
scsi ch.c build fix
gregkh-usb.patch
usb-wacom-tablet-driver.patch
usb wacom tablet driver
add-new-wacom-device-to-usb-hid-core-list.patch
add new wacom device to usb hid-core list
zd1201-build-fix.patch
zd1201 build fix
pm-support-for-zd1201.patch
PM support for zd1201
bug-fix-in-usbdevfs.patch
bug fix in usbdevfs
usb-turn-a-user-mode-driver-error-into-a-hard-error.patch
usb: turn a user mode driver error into a hard error
usb-storage-debugc-missing-include.patch
usb/storage/debug.c: missing include
bk-watchdog.patch
mm.patch
add -mmN to EXTRAVERSION
swapspace-layout-improvements.patch
swapspace-layout-improvements
/proc/swaps negative Used
vmscan-notice-slab-shrinking.patch
vmscan: notice slab shrinking
madvise-do-not-split-the-maps.patch
madvise: do not split the maps
madvise-merge-the-maps.patch
madvise: merge the maps
freepgt-free_pgtables-use-vma-list.patch
freepgt: free_pgtables use vma list
freepgt-remove-mm_vm_sizemm.patch
freepgt: remove MM_VM_SIZE(mm)
freepgt-hugetlb_free_pgd_range.patch
freepgt: hugetlb_free_pgd_range
freepgt-hugetlb_free_pgd_range-fix-aio-panic-fix.patch
ppc64-fix-aio-panic-caused-by-is_hugepage_only_range-ia64-fix
freepgt-remove-arch-pgd_addr_end.patch
freepgt: remove arch pgd_addr_end
freepgt-mpnt-to-vma-cleanup.patch
freepgt: mpnt to vma cleanup
freepgt-hugetlb-area-is-clean.patch
freepgt: hugetlb area is clean
freepgt2-free_pgtables-from-first_user_address.patch
freepgt2: free_pgtables from FIRST_USER_ADDRESS
freepgt2-sys_mincore-ignore-first_user_pgd_nr.patch
freepgt2: sys_mincore ignore FIRST_USER_PGD_NR
freepgt2-arm-first_user_address-page_size.patch
freepgt2: arm FIRST_USER_ADDRESS PAGE_SIZE
freepgt2-arm26-first_user_address-page_size.patch
freepgt2: arm26 FIRST_USER_ADDRESS PAGE_SIZE
freepgt2-arch-first_user_address-0.patch
freepgt2: arch FIRST_USER_ADDRESS 0
freepgt2-remove-first_user_address-hack.patch
freepgt2: remove FIRST_USER_ADDRESS hack
remove-non-discontig-use-of-pgdat-node_mem_map.patch
remove non-DISCONTIG use of pgdat->node_mem_map
resubmit-sparsemem-base-early_pfn_to_nid-works-before-sparse-is-initialized.patch
sparsemem base: early_pfn_to_nid() (works before sparse is initialized)
resubmit-sparsemem-base-simple-numa-remap-space-allocator.patch
sparsemem base: simple NUMA remap space allocator
resubmit-sparsemem-base-reorganize-page-flags-bit-operations.patch
sparsemem base: reorganize page->flags bit operations
resubmit-sparsemem-base-teach-discontig-about-sparse-ranges.patch
sparsemem base: teach discontig about sparse ranges
create-mm-kconfig-for-arch-independent-memory-options.patch
create mm/Kconfig for arch-independent memory options
make-each-arch-use-mm-kconfig.patch
make each arch use mm/Kconfig
update-all-defconfigs-for-arch_discontigmem_enable.patch
update all defconfigs for ARCH_DISCONTIGMEM_ENABLE
introduce-new-kconfig-option-for-numa-or-discontig.patch
Introduce new Kconfig option for NUMA or DISCONTIG
sparsemem-fix-minor-defaults-issue-in-mm-kconfig.patch
sparsemem: fix minor "defaults" issue in mm/Kconfig
filemap_getpage-can-block-when-map_nonblock-specified.patch
filemap_getpage can block when MAP_NONBLOCK specified
add-kmalloc_node-inline-cleanup.patch
add kmalloc_node, inline cleanup
oom-killer-disable-for-iscsi-lvm2-multipath-userland-critical-sections.patch
oom-killer disable for iscsi/lvm2/multipath userland critical sections
vmscan-pageout-remove-unneeded-test.patch
vmscan: pageout(): remove unneeded test
end_buffer_write_sync-avoid-pointless-assignments.patch
end_buffer_write_sync() avoid pointless assignments
meminfo-add-cached-underflow-check.patch
meminfo: add Cached underflow check
eni155p-error-handling-fix.patch
ENI155P error handling fix
a-new-10gb-ethernet-driver-by-chelsio-communications.patch
A new 10GB Ethernet Driver by Chelsio Communications
chelsio-build-fix.patch
chelsio build fix
dm9000-network-driver.patch
DM9000 network driver
fix-linux-atalkh-header.patch
Fix linux/atalk.h header
dont-call-kmem_cache_create-with-a-spinlock-held.patch
net: don't call kmem_cache_create with a spinlock held
fix-dst_destroy-race.patch
Fix dst_destroy() race
irda_device-oops-fix.patch
irda_device() oops fix
selinux-add-support-for-netlink_kobject_uevent.patch
SELinux: add support for NETLINK_KOBJECT_UEVENT
ppc32-fix-bogosity-in-process-freezing-code.patch
ppc32: fix bogosity in process-freezing code
ppc32-ppc4xx_pic-add-acknowledge-when-enabling-level-sensitive-irq.patch
ppc32: ppc4xx_pic - add acknowledge when enabling level-sensitive IRQ
ppc32-improve-timebase-sync-for-smp.patch
ppc32: improve timebase sync for SMP
ppc32-oops-on-kernel-altivec-assist-exceptions.patch
ppc32: oops on kernel altivec assist exceptions
ppc32-fix-single-stepping-of-emulated-instructions.patch
ppc32: fix single-stepping of emulated instructions
ppc32-fix-cpufreq-problems.patch
ppc32: Fix cpufreq problems
ppc32-fix-agp-and-sleep-again.patch
ppc32: Fix AGP and sleep again
ppc32-fix-pte_update-for-64-bit-ptes.patch
ppc32: Fix pte_update for 64-bit PTEs
ppc32-make-usage-of-config_pte_64bit-config_phys_64bit.patch
ppc32: make usage of CONFIG_PTE_64BIT & CONFIG_PHYS_64BIT consistent
ppc32-allow-adjust-of-pfn-offset-in-pte.patch
ppc32: Allow adjust of pfn offset in pte
ppc32-support-36-bit-physical-addressing-on-e500.patch
ppc32: Support 36-bit physical addressing on e500
ppc32-fix-errata-for-some-g3-cpus.patch
ppc32: Fix errata for some G3 CPUs
ppc32-fix-mpc8xx-watchdog.patch
ppc32: Fix mpc8xx watchdog
ppc64-fix-semantics-of-__ioremap.patch
ppc64: Fix semantics of __ioremap
ppc64-fix-export-of-wrong-symbol.patch
ppc64: fix export of wrong symbol
ppc64-kconfig-memory-models.patch
ppc64: Kconfig memory models
ppc64-improve-mapping-of-vdso.patch
ppc64: Improve mapping of vDSO
ppc64-detect-altivec-via-firmware-on-unknown-cpus.patch
ppc64: Detect altivec via firmware on unknown CPUs
ppc64-remove-bogus-f50-hack-in-promc.patch
ppc64: remove bogus f50 hack in prom.c
mips-remove-obsolete-vr41xx-rtc-function.patch
mips: remove obsolete VR41xx RTC function from vr41xx.h
mips-update-vr41xx-cpu-pci-bridge.patch
mips: update VR41xx CPU-PCI bridge support
mips-remove-include-linux-audith-two.patch
mips: remove #include <linux/audit.h> two times
fix-i386-memcpy.patch
fix i386 memcpy
i386-x86_64-segment-register-access-update.patch
i386/x86_64 segment register access update
rfc-check-nmi-watchdog-is-broken.patch
check nmi watchdog is broken
irq-and-pci_ids-patch-for-intel-esb2.patch
irq and pci_ids: patch for Intel ESB2
piix-ide-pata-patch-for-intel-esb2.patch
piix: IDE PATA patch for Intel ESB2
intel8x0-ac97-audio-patch-for-intel-esb2.patch
intel8x0: AC'97 audio patch for Intel ESB2
ata_piix-ide-mode-sata-patch-for-intel-esb2.patch
ata_piix: IDE mode SATA patch for Intel ESB2
ahci-ahci-mode-sata-patch-for-intel-esb2.patch
ahci: AHCI mode SATA patch for Intel ESB2
i2c-i801-i2c-patch-for-intel-esb2.patch
i2c-i801: I2C patch for Intel ESB2
x86_64-disable-interrupts-during-smp-bogomips-checking.patch
x86_64: disable interrupts during SMP bogomips checking
x86_64-genapic-update.patch
x86_64 genapic update
x86_64-show_stack-touch_nmi_watchdog.patch
x86_64 show_stack(): call touch_nmi_watchdog
x86_64-use-a-vma-for-the-32bit-vsyscall.patch
x86_64: Use a VMA for the 32bit vsyscall
x86_64-make-irda-devices-are-not-really-isa-devices-not.patch
x86_64: Make IRDA devices are not really ISA devices not depend on CONFIG_ISA
x86_64-from-i386-originally-from-linus.patch
x86_64: clean up ptrace single-stepping
x86_64-some-fixes-for-single-step-handling.patch
x86_64: Some fixes for single step handling
x86_64-handle-programs-that-set-tf-in-user-space-using.patch
x86_64: Handle programs that set TF in user space using popf while single stepping
x86_64-use-a-common-function-to-find-code-segment-bases.patch
x86_64: Use a common function to find code segment bases
x86_64-use-a-common-function-to-find-code-segment-bases-fix.patch
x86_64-use-a-common-function-to-find-code-segment-bases fix
x86_64-dump-stack-and-prevent-recursion-on-early-fault.patch
x86_64: Dump stack and prevent recursion on early fault
x86_64-fix-interaction-of-single-stepping-with-debuggers.patch
x86_64: Fix interaction of single stepping with debuggers
x86_64-minor-microoptimization-in-syscall-entry-slow-path.patch
x86_64: Minor microoptimization in syscall entry slow path
x86_64-call-do_notify_resume-unconditionally-in-entrys.patch
x86_64: Call do_notify_resume unconditionally in entry.S
x86_64-regularize-exception-stack-handling.patch
x86_64: Regularize exception stack handling
x86_64-fix-a-small-missing-schedule-race.patch
x86_64: Fix a small missing schedule race
x86_64-remove-unused-macro-in-preempt-support.patch
x86_64: Remove unused macro in preempt support
x86_64-support-constantly-ticking-tscs.patch
x86_64: Support constantly ticking TSCs
x86_64-make-kernel-math-errors-a-die-now.patch
x86_64: Make kernel math errors a die() now
x86_64-dont-assume-future-amd-cpus-have-k8-compatible.patch
x86_64: Don't assume future AMD CPUs have K8 compatible performance counters
x86_64-correct-wrong-comment-in-localh.patch
x86_64: Correct wrong comment in local.h
x86_64-use-the-extended-rip-msr-for-machine-check.patch
x86_64: Use the extended RIP MSR for machine check reporting if available.
x86_64-remove-excessive-stack-allocation-in-mce-code.patch
x86_64: Remove excessive stack allocation in MCE code with large NR_CPUS
x86_64-always-use-cpuid-80000008-to-figure-out-mtrr.patch
x86_64: Always use CPUID 80000008 to figure out MTRR address space size
x86_64-port-over-e820-gap-detection-from-i386.patch
x86_64: Port over e820 gap detection from i386
x86_64-use-the-e820-hole-to-map-the-iommu-agp-aperture.patch
x86_64: Use the e820 hole to map the IOMMU/AGP aperture
x86_64-keep-only-a-single-debug-notifier-chain.patch
x86_64: Keep only a single debug notifier chain
x86_64-remove-duplicated-syscall-entry.patch
x86_64: Remove duplicated syscall entry.
x86_64-adds-support-for-intel-dual-core-detection-and-displaying.patch
x86_64: add support for Intel dual-core detection and displaying
x86_64-final-support-for-amd-dual-core.patch
x86_64: Final support for AMD dual core
x86_64-final-support-for-amd-dual-core-fix.patch
x86_64-final-support-for-amd-dual-core-fix
x86_64-rewrite-exception-stack-backtracing.patch
x86_64: Rewrite exception stack backtracing
x86_64-add-acpi_skip_timer_override-option.patch
x86_64: Add acpi_skip_timer_override option
x86_64-rename-the-extended-cpuid-level-field.patch
x86_64: Rename the extended cpuid level field
x86_64-switch-smp-bootup-over-to-new-cpu-hotplug-state.patch
x86_64: Switch SMP bootup over to new CPU hotplug state machine
x86_64-switch-smp-bootup-over-to-new-cpu-hotplug-state-fix.patch
x86_64-switch-smp-bootup-over-to-new-cpu-hotplug-state fix
x86-cacheline-alignment-for-cpu-maps.patch
x86: cacheline alignment for cpu maps
ia64-reduce-cacheline-bouncing-in-cpu_idle_wait.patch
ia64: reduce cacheline bouncing in cpu_idle_wait
pm_message_t-more-fixes-in-common-and-i386.patch
pm_message_t: more fixes in common and i386
fix-u32-vs-pm_message_t-in-drivers-char.patch
Fix u32 vs. pm_message_t in drivers/char
u32-vs-pm_message_t-fixes-for-drivers-net.patch
u32 vs. pm_message_t fixes for drivers/net
fix-u32-vs-pm_message_t-in-pcmcia.patch
fix u32 vs. pm_message_t in pcmcia
fix-u32-vs-pm_message_t-in-drivers-media.patch
fix u32 vs. pm_message_t in drivers/media
fix-u32-vs-pm_message_t-in-drivers-message.patch
fix u32 vs. pm_message_t in drivers/message
fix-u32-vs-pm_message_t-in-drivers-mmcmtdscsi.patch
fix u32 vs. pm_message_t in drivers/mmc,mtd,scsi
fix-pm_message_t-vs-u32-in-alsa.patch
fix pm_message_t vs. u32 in alsa
fix-u32-vs-pm_message_t-in-x86-64.patch
Fix u32 vs. pm_message_t in x86-64
fix-u32-vs-pm_message_t-in-drivers-macintosh.patch
fix u32 vs. pm_message_t in drivers/macintosh
fix-u32-vs-pm_message_t-in-pci-pcie.patch
fix u32 vs. pm_message_t in PCI, PCIE
u32-vs-pm_message_t-in-ppc-and-radeon.patch
u32 vs. pm_message_t in ppc and radeon
power-videotxt-update-documentation-with-more-systems.patch
power/video.txt: update documentation with more systems
fix-u32-vs-pm_message_t-in-drivers.patch
fix u32 vs. pm_message_t in drivers/
fix-u32-vs-pm_message_t-in-driver-video.patch
fix u32 vs. pm_message_t in driver/video
fix-u32-vs-pm_message_t-in-rest-of-the-tree.patch
fix u32 vs. pm_message_t in rest of the tree
uml-fix-compilation-for-__choose_mode-addition.patch
uml: fix compilation for __CHOOSE_MODE addition
mtrr-size-and-base-debug.patch
mtrr size-and-base debugging
iounmap-debugging.patch
iounmap debugging
detect-soft-lockups.patch
detect soft lockups
detect-soft-lockups-from-touch_nmi_watchdog.patch
detect-soft-lockups: call from touch_nmi_watchdog
kernel-softlockup-fix-usage-of-msleep_interruptible.patch
kernel/softlockup: fix usage of msleep_interruptible()
areca-raid-linux-scsi-driver.patch
ARECA RAID Linux scsi driver
rt-lsm.patch
RT-LSM
tty-output-lossage-fix.patch
tty output lossage fix
possible-use-after-free-of-bio.patch
possible use-after-free of bio
nice-and-rt-prio-rlimits.patch
nice and rt-prio rlimits
relayfs.patch
relayfs
relayfs-properly-handle-oversized-events.patch
relayfs: properly handle oversized events
relayfs-backing_dev-fix.patch
relayfs-backing_dev-fix
cfq-iosched-update-to-time-sliced-design.patch
cfq-iosched: update to time sliced design
cfq-iosched-update-to-time-sliced-design-export-task_nice.patch
cfq-iosched-update-to-time-sliced-design-export-task_nice
cfq-iosched-update-to-time-sliced-design-fix.patch
cfq-iosched-update-to-time-sliced-design fix
cfq-iosched-update-to-time-sliced-design-fix-fix.patch
cfq-iosched-update-to-time-sliced-design-fix-fix
cfq-iosched-update-to-time-sliced-design-use-bio_data_dir.patch
cfq-iosched-update-to-time-sliced-design: use bio_data_dir()
cfq-ioschedc-fix-soft-hang-with-non-fs-requests.patch
cfq-iosched.c: fix soft hang with non-fs requests
keys-discard-key-spinlock-and-use-rcu-for-key-payload.patch
keys: Discard key spinlock and use RCU for key payload
keys-discard-key-spinlock-and-use-rcu-for-key-payload-try-4.patch
keys: Discard key spinlock and use RCU for key payload - try #4
keys-pass-session-keyring-to-call_usermodehelper.patch
Keys: Pass session keyring to call_usermodehelper()
keys-pass-session-keyring-to-call_usermodehelper-fix.patch
keys-pass-session-keyring-to-call_usermodehelper fix
keys-use-rcu-to-manage-session-keyring-pointer.patch
Keys: Use RCU to manage session keyring pointer
keys-make-request-key-create-an-authorisation-key.patch
Keys: Make request-key create an authorisation key
keys-make-request-key-create-an-authorisation-key-fix.patch
Keys: Make request-key create an authorisation key (fix)
binfmt_elf-bss-padding-fix.patch
binfmt_elf bss padding fix
timers-fixes-improvements.patch
timers fixes/improvements
timers-fixes-improvements-smp_processor_id-fix.patch
timers-fixes-improvements-smp_processor_id-fix
timers-fixes-improvements-fix.patch
timers fixes/improvements fix
enable-sig_ign-on-blocked-signals.patch
Enable SIG_IGN on blocked signals
async-io-using-rt-signals.patch
AYSNC IO using singals other than SIGIO
kernel-paramc-dont-use-max-when-num-is-null-in.patch
kernel/param.c: don't use .max when .num is NULL in param_array_set()
fix-module_param_string-calls.patch
fix module_param_string() calls
use-cheaper-elv_queue_empty-when-unplug-a-device.patch
use cheaper elv_queue_empty when unplug a device
fixup-newly-added-jsm-driver.patch
fix up newly added jsm driver
ext2-corruption-regression-between-269-and-2610.patch
ext2 corruption - regression between 2.6.9 and 2.6.10
quota-fix-possible-oops-on-quotaoff.patch
quota: fix possible oops on quotaoff
quota-possible-bug-in-quota-format-v2-support.patch
quota: possible bug in quota format v2 support
kill-ifndef-have_arch_get_signal_to_deliver-in-signalc.patch
kill #ifndef HAVE_ARCH_GET_SIGNAL_TO_DELIVER in signal.c
officially-deprecate-register_ioctl32_conversion.patch
officially deprecate register_ioctl32_conversion
undo-do_readv_writev-behavior-change.patch
undo do_readv_writev() behavior change
kprobes-incorrect-handling-of-probes-on-ret-lret-instruction.patch
Kprobes: Incorrect handling of probes on ret/lret instruction
sysfs-for-ipmi-for-new-mm-kernels.patch
sysfs for IPMI
remove-all-kernel-bugs.patch
remove all kernel BUGs
exterminate-page_bug.patch
Exterminate PAGE_BUG
clean-up-kernel-messages.patch
clean up kernel messages
move-sa_xxx-defines-to-linux-signalh.patch
move SA_xxx defines to linux/signal.h
procfs-fix-hardlink-counts.patch
procfs: Fix hardlink counts
procfs-fix-hardlink-counts-for-proc-pid-task.patch
procfs: Fix hardlink counts for /proc/<PID>/task
show-thread_info-flags-in-proc-pid-status.patch
Show thread_info->flags in /proc/PID/status
direct-io-async-short-read-fix.patch
Direct IO async short read fix
set-ms_active-bit-before-calling-fill_super.patch
Set MS_ACTIVE bit before calling ->fill_super functions
kernel-rcupdatec-make-the-exports-export_symbol_gpl.patch
kernel/rcupdate.c: make the exports EXPORT_SYMBOL_GPL
add-deprecated_for_modules.patch
Add deprecated_for_modules
add-deprecated_for_modules-fix.patch
deprecate-synchronize_kernel-gpl-replacement fix
deprecate-synchronize_kernel-gpl-replacement.patch
Deprecate synchronize_kernel, GPL replacement
deprecate-synchronize_kernel-gpl-replacement-fix.patch
deprecate-synchronize_kernel-gpl-replacement-fix
change-synchronize_kernel-to-_rcu-and-_sched.patch
Change synchronize_kernel to _rcu and _sched
update-rcu-documentation.patch
Update RCU documentation
fix-comment-in-listh-that-refers-to-nonexistent-api.patch
Fix comment in list.h that refers to nonexistent API
pnpbios-eliminate-bad-section-references.patch
pnpbios: eliminate bad section references
hd-eliminate-bad-section-references.patch
hd: eliminate bad section references
efi-eliminate-bad-section-references.patch
efi: eliminate bad section references
create-a-kstrdup-library-function.patch
create a kstrdup library function
create-a-kstrdup-library-function-fixes.patch
create-a-kstrdup-library-function-fixes
add-big-endian-variants-of-ioread-iowrite.patch
add Big Endian variants of ioread/iowrite
opl3sa2-module_parm_desc.patch
opl3sa2: MODULE_PARM_DESC
con_consdev-bit-not-set-correctly-on-last-console.patch
CON_CONSDEV bit not set correctly on last console
update-maintainer-for-dev-random.patch
update maintainer for /dev/random
add-dontdiff-file.patch
Add dontdiff file
inotify-022-for-2612-rc1-mm4.patch
inotify 0.22 for 2.6.12-rc1-mm4
ipoib-set-skb-macraw-on-receive.patch
IPoIB: set skb->mac.raw on receive
ipoib-fix-static-rate-calculation.patch
IPoIB: fix static rate calculation
ipoib-convert-to-debugfs.patch
IPoIB: convert to debugfs
ipoib-document-conversion-to.patch
IPoIB: document conversion to debugfs
ib-keep-mad-work-completion-valid.patch
IB: Keep MAD work completion valid
ib-remove-unneeded-includes.patch
IB: remove unneeded includes
ib-fix-fmr-pool-crash.patch
IB: Fix FMR pool crash
ib-trivial-fmr-printk-cleanup.patch
IB: Trivial FMR printk cleanup
ib-fix-user-mad-registrations-with-class-0.patch
IB: Fix user MAD registrations with class 0
ib-remove-incorrect-comments.patch
IB: Remove incorrect comments
ib-mthca-map-mpt-mtt-context-in-mem-free-mode.patch
IB/mthca: map MPT/MTT context in mem-free mode
ib-mthca-fill-in-more-device-query-fields.patch
IB/mthca: fill in more device query fields
ib-mthca-fix-calculation-of-rdb-shift.patch
IB/mthca: fix calculation of RDB shift
ib-mthca-fix-posting-sends-with-immediate-data.patch
IB/mthca: fix posting sends with immediate data
ib-mthca-allow-unaligned-memory-regions.patch
IB/mthca: allow unaligned memory regions
ib-mthca-allocate-correct-number-of-doorbell-pages.patch
IB/mthca: allocate correct number of doorbell pages
ib-mthca-clean-up-mthca_dereg_mr.patch
IB/mthca: clean up mthca_dereg_mr()
ib-mthca-fix-mr-allocation-error-path.patch
IB/mthca: fix MR allocation error path
ib-mthca-release-mutex-on-doorbell-alloc-error-path.patch
IB/mthca: release mutex on doorbell alloc error path
ib-mthca-print-assigned-irq-when-interrupt-test-fails.patch
IB/mthca: print assigned IRQ when interrupt test fails
ib-mthca-only-free-doorbell-records-in-mem-free-mode.patch
IB/mthca: only free doorbell records in mem-free mode
ib-mthca-fix-format-of-cq-number-for-cq-events.patch
IB/mthca: fix format of CQ number for CQ events
ib-mthca-implement-rdma-atomic-operations-for-mem-free-mode.patch
IB/mthca: implement RDMA/atomic operations for mem-free mode
ib-mthca-fix-mtt-allocation-in-mem-free-mode.patch
IB/mthca: fix MTT allocation in mem-free mode
ib-mthca-fill-in-opcode-field-for-send-completions.patch
IB/mthca: fill in opcode field for send completions
ib-mthca-allow-address-handle-creation-in-interrupt-context.patch
IB/mthca: allow address handle creation in interrupt context
ib-mthca-encapsulate-mtt-buddy-allocator.patch
IB/mthca: encapsulate MTT buddy allocator
ib-mthca-add-sync_tpt-firmware-command.patch
IB/mthca: add SYNC_TPT firmware command
ib-mthca-add-mthca_write64_raw-for-writing-to-mtt-table-directly.patch
IB/mthca: add mthca_write64_raw() for writing to MTT table directly
ib-mthca-add-mthca_table_find-function.patch
IB/mthca: add mthca_table_find() function
ib-mthca-split-mr-key-munging-routines.patch
IB/mthca: split MR key munging routines
ib-mthca-add-fast-memory-region-implementation.patch
IB/mthca: add fast memory region implementation
ib-mthca-tweaks-to-mthca_cmdc.patch
IB/mthca: tweaks to mthca_cmd.c
ib-mthca-encapsulate-mem-free-check-into-mthca_is_memfree.patch
IB/mthca: encapsulate mem-free check into mthca_is_memfree()
ib-mthca-map-context-for-rdma-responder-in-mem-free-mode.patch
IB/mthca: map context for RDMA responder in mem-free mode
ib-mthca-update-receive-queue-initialization-for-new-hcas.patch
IB/mthca: update receive queue initialization for new HCAs
ib-mthca-add-support-for-new-mt25204-hca.patch
IB/mthca: add support for new MT25204 HCA
ib-mthca-add-support-for-new-mt25204-hca-fix.patch
drivers/infiniband/hw/mthca/mthca_main.c: remove an unused label
jbd-dirty-buffer-leak-fix.patch
jbd dirty buffer leak fix
ext3-remove-unnecessary-race-then-retry-in-ext3_get_block.patch
ext3: remove unnecessary race then retry in ext3_get_block
ext3-remove-unnecessary-race-then-retry-in-ext3_get_block-leak-fix.patch
ext3-remove-unnecessary-race-then-retry-in-ext3_get_block-leak-fix
pcmcia-hotplug-event-for-pcmcia-devices.patch
pcmcia: hotplug event for PCMCIA devices
pcmcia-hotplug-event-for-pcmcia-socket-devices.patch
pcmcia: hotplug event for PCMCIA socket devices
pcmcia-device-and-driver-matching.patch
pcmcia: device and driver matching
pcmcia-check-for-invalid-crc32-hashes-in-id_tables.patch
pcmcia: check for invalid crc32 hashes in id_tables
pcmcia-match-for-fake-cis.patch
pcmcia: match for fake CIS
pcmcia-export-cis-in-sysfs.patch
pcmcia: export CIS in sysfs
pcmcia-cis-overrid-via-sysfs.patch
pcmcia: CIS overrid via sysfs
pcmcia-match-anonymous-cards.patch
pcmcia: match "anonymous" cards
pcmcia-allow-function-id-based-match.patch
pcmcia: allow function-ID based match
pcmcia-file2alias.patch
pcmcia: file2alias
pcmcia-request-cis-via-firmware-interface.patch
pcmcia: request CIS via firmware interface
pcmcia-cleanups.patch
pcmcia: cleanups
pcmcia-rescan-bus-always-upon-echoing-into-setup_done.patch
pcmcia: rescan bus always upon echoing into setup_done
pcmcia-id_table-for-serial_cs.patch
pcmcia: id_table for serial_cs
pcmcia-id_table-for-3c574_cs.patch
pcmcia: id_table for 3c574_cs
pcmcia-id_table-for-3c589_cs.patch
pcmcia: id_table for 3c589_cs
pcmcia-id_table-for-aha152x.patch
pcmcia: id_table for aha152x
pcmcia-id_table-for-airo_cs.patch
pcmcia: id_table for airo_cs
pcmcia-id_table-for-axnet_cs.patch
pcmcia: id_table for axnet_cs
pcmcia-id_table-for-fdomain_stub.patch
pcmcia: id_table for fdomain_stub
pcmcia-id_table-for-fmvj18x_cs.patch
pcmcia: id_table for fmvj18x_cs
pcmcia-id_table-for-ibmtr_cs.patch
pcmcia: id_table for ibmtr_cs
pcmcia-id_table-for-netwave_cs.patch
pcmcia: id_table for netwave_cs
pcmcia-id_table-for-nmclan_cs.patch
pcmcia: id_table for nmclan_cs
pcmcia-id_table-for-teles_cs.patch
pcmcia: id_table for teles_cs
pcmcia-id_table-for-ray_cs.patch
pcmcia: id_table for ray_cs
pcmcia-id_table-for-wavelan_cs.patch
pcmcia: id_table for wavelan_cs
pcmcia-id_table-for-sym53c500_csc.patch
pcmcia: id_table for sym53c500_cs.c
pcmcia-id_table-for-qlogic_stubc.patch
pcmcia: id_table for qlogic_stub.c
pcmcia-id_table-for-smc91c92_csc.patch
pcmcia: id_table for smc91c92_cs.c
pcmcia-id_table-for-orinoco_cs.patch
pcmcia: id_table for orinoco_cs
pcmcia-id_table-for-xirc2ps_csc.patch
pcmcia: id_table for xirc2ps_cs.c
pcmcia-id_table-for-ide_csc.patch
pcmcia: id_table for ide_cs.c
pcmcia-id_table-for-parport_csc.patch
pcmcia: id_table for parport_cs.c
pcmcia-id_table-for-pcnet_csc.patch
pcmcia: id_table for pcnet_cs.c
pcmcia-id_table-for-pcmciamtdc.patch
pcmcia: id_table for pcmciamtd.c
pcmcia-id_table-for-vxpocketc.patch
pcmcia: id_table for vxpocket.c
pcmcia-id_table-for-atmel_csc.patch
pcmcia: id_table for atmel_cs.c
pcmcia-id_table-for-avma1_csc.patch
pcmcia: id_table for avma1_cs.c
pcmcia-id_table-for-avm_csc.patch
pcmcia: id_table for avm_cs.c
pcmcia-id_table-for-bluecard_csc.patch
pcmcia: id_table for bluecard_cs.c
pcmcia-id_table-for-bt3c_csc.patch
pcmcia: id_table for bt3c_cs.c
pcmcia-id_table-for-btuart_csc.patch
pcmcia: id_table for btuart_cs.c
pcmcia-id_table-for-com20020_csc.patch
pcmcia: id_table for com20020_cs.c
pcmcia-id_table-for-dtl1_csc.patch
pcmcia: id_table for dtl1_cs.c
pcmcia-id_table-for-elsa_csc.patch
pcmcia: id_table for elsa_cs.c
pcmcia-id_table-for-ixj_pcmciac.patch
pcmcia: id_table for ixj_pcmcia.c
pcmcia-id_table-for-nsp_csc.patch
pcmcia: id_table for nsp_cs.c
pcmcia-id_table-for-sedlbauer_csc.patch
pcmcia: id_table for sedlbauer_cs.c
pcmcia-id_table-for-wl3501_csc.patch
pcmcia: id_table for wl3501_cs.c
pcmcia-id_table-for-pdaudiocfc.patch
pcmcia: id_table for pdaudiocf.c
pcmcia-id_table-for-synclink_csc.patch
pcmcia: id_table for synclink_cs.c
pcmcia-add-some-documentation.patch
pcmcia: add some Documentation
pcmcia-update-resource-database-adjust-routines-to-use-unsigned-long-values.patch
pcmcia: update resource database adjust routines to use unsigned long values
pcmcia-mark-parent-bridge-windows-as-resources-available-for-pcmcia-devices.patch
pcmcia: mark parent bridge windows as resources available for PCMCIA devices
pcmcia-add-a-config-option-for-the-pcmica-ioctl.patch
pcmcia: add a config option for the PCMICA ioctl
pcmcia-move-pcmcia-ioctl-to-a-separate-file.patch
pcmcia: move PCMCIA ioctl to a separate file
pcmcia-clean-up-cs-ds-callback.patch
pcmcia: clean up cs ds callback
pcmcia-clean-up-cs-ds-callback-fix.patch
pcmcia-clean-up-cs-ds-callback-fix
pcmcia-make-pcmcia-status-a-bitfield.patch
pcmcia: make PCMCIA status a bitfield
pcmcia-merge-struct-pcmcia_bus_socket-into-struct-pcmcia_socket.patch
pcmcia: merge struct pcmcia_bus_socket into struct pcmcia_socket
pcmcia-remove-unneeded-includes-in-dsc.patch
pcmcia: remove unneeded includes in ds.c
pcmcia-rename-some-functions.patch
pcmcia: rename some functions
pcmcia-move-pcmcia-resource-handling-out-of-csc.patch
pcmcia: move pcmcia resource handling out of cs.c
pcmcia-csc-cleanup.patch
pcmcia: cs.c cleanup
pcmcia-dsc-cleanup.patch
pcmcia: ds.c cleanup
pcmcia-release_class.patch
pcmcia: release_class
pcmcia-use-request_region-in-i82365.patch
pcmcia: use request_region in i82365
pcmcia-synclink_cs-irq_info2_info-is-gone.patch
pcmcia: synclink_cs IRQ_INFO2_INFO is gone
pcmcia-mod_devicetableh-fix-for-different-sizes-in-kernel-and-userspace.patch
pcmcia: mod_devicetable.h fix for different sizes in kernel- and userspace
pcmcia-select-crc32-in-kconfig-for-pcmcia.patch
pcmcia: select crc32 in Kconfig for PCMCIA
pcmcia-resource-handling-fixes.patch
pcmcia: resource handling fixes
nfsd-clear-signals-before-exiting-the-nfsd-thread.patch
nfsd: clear signals before exiting the nfsd() thread
nfsd4-callback-create-rpc-client-returns.patch
nfsd4: callback create rpc client returns
nfsd4-fix-struct-file-leak.patch
nfsd4: fix struct file leak
nfsd4-find_delegation_file.patch
nfsd4: find_delegation_file()
nfsd4-nfs4_check_delegmode.patch
nfsd4: nfs4_check_delegmode
nfsd4-dont-reopen-for-delegated-client.patch
nfsd4: don't reopen for delegated client
nfsd4-add-open-state-code-for-claim_delegate_cur.patch
nfsd4: add open state code for CLAIM_DELEGATE_CUR
nfsd4-support-claim_delegate_cur.patch
nfsd4: support CLAIM_DELEGATE_CUR
nfsd4-fix-fh_expire_type.patch
nfsd4: fix fh_expire_type
nfsd4-block-metadata-ops-during-grace-period.patch
nfsd4: block metadata ops during grace period
nfsd4-slabify-nfs4_files.patch
nfsd4: slabify nfs4_files
nfsd4-slabify-stateids.patch
nfsd4: slabify stateids
nfsd4-slabify-delegations.patch
nfsd4: slabify delegations
nfsd4-remove-debugging-counters.patch
nfsd4: remove debugging counters
nfsd4-rename-nfs4_file-fields.patch
nfsd4: rename nfs4_file fields
nfsd4-reference-count-struct-nfs4_file.patch
nfsd4: reference count struct nfs4_file
nfsacl-solaris-nfsacl-workaround.patch
nfsacl: Solaris nfsacl workaround
nfs-client-latencies.patch
NFS client latency fixes
kgdb-ga.patch
kgdb stub for ia32 (George Anzinger's one)
kgdbL warning fix
kgdb buffer overflow fix
kgdbL warning fix
kgdb: CONFIG_DEBUG_INFO fix
x86_64 fixes
correct kgdb.txt Documentation link (against 2.6.1-rc1-mm2)
kgdb: fix for recent gcc
kgdb warning fixes
THREAD_SIZE fixes for kgdb
Fix stack overflow test for non-8k stacks
kgdb-ga.patch fix for i386 single-step into sysenter
fix TRAP_BAD_SYSCALL_EXITS on i386
add TRAP_BAD_SYSCALL_EXITS config for i386
kgdb-is-incompatible-with-kprobes
kgdb-ga-build-fix
kgdb-ga-fixes
kgdb: kill off highmem_start_page
kgdb documentation fix
kgdb-x86-config_debug_info-fix.patch
kgdb CONFIG_DEBUG_INFO fix
kgdboe-netpoll.patch
kgdb-over-ethernet via netpoll
kgdboe: fix configuration of MAC address
kgdb-x86_64-support.patch
kgdb-x86_64-support.patch for 2.6.2-rc1-mm3
kgdb-x86_64-warning-fixes
kgdb-x86_64-fix
kgdb-x86_64-serial-fix
kprobes exception notifier fix
kgdb-x86_64-config_debug_info-fix.patch
kgdb CONFIG_DEBUG_INFO fix
rock-lindent.patch
rock: lindent it
rock-manual-tidies.patch
rock: manual tidies
rock-remove-CHECK_SP.patch
rock: remove CHECK_SP
rock-remove-CONTINUE_DECLS.patch
rock: remove CONTINUE_DECLS
rock-remove-CHECK_CE.patch
rock: remove CHECK_CE
rock-remove-SETUP_ROCK_RIDGE.patch
rock: remove SETUP_ROCK_RIDGE
rock-remove-MAYBE_CONTINUE.patch
rock: remove MAYBE_CONTINUE
rock-comment-tidies.patch
rock: comment tidies
rock-lindent-rock-h.patch
rock: lindent rock.h
isofs-remove-debug-stuff.patch
isofs: remove debug stuff
rock-handle-corrupted-directories.patch
rock.c: handle corrupted directories
rock-rename-union-members.patch
rock: rename union members
rock-handle-directory-overflows.patch
rock: handle directory overflows
rock-handle-directory-overflows-fix.patch
rock-handle-directory-overflows-fix
journal_add_journal_head-debug.patch
journal_add_journal_head-debug
list_del-debug.patch
list_del debug check
page-owner-tracking-leak-detector.patch
Page owner tracking leak detector
make-page_owner-handle-non-contiguous-page-ranges.patch
make page_owner handle non-contiguous page ranges
add-gfp_mask-to-page-owner.patch
add gfp_mask to page owner
unplug-can-sleep.patch
unplug functions can sleep
firestream-warnings.patch
firestream warnings
periodically-scan-redzone-entries-and-slab-control-structures.patch
periodically scan redzone entries and slab control structures
slab-leak-detector.patch
slab leak detector
slab-leak-detector-warning-fixes.patch
slab leak detector warning fixes
irqpoll.patch
irqpoll
releasing-resources-with-children.patch
Releasing resources with children
perfctr-core.patch
perfctr: core
perfctr: remove bogus perfctr_sample_thread() calls
perfctr-i386.patch
perfctr: i386
perfctr-x86-core-updates.patch
perfctr x86 core updates
perfctr-x86-driver-updates.patch
perfctr x86 driver updates
perfctr-x86-driver-cleanup.patch
perfctr: x86 driver cleanup
perfctr-prescott-fix.patch
Prescott fix for perfctr
perfctr-x86-update-2.patch
perfctr x86 update 2
perfctr-x86_64.patch
perfctr: x86_64
perfctr-x86_64-core-updates.patch
perfctr x86_64 core updates
perfctr-ppc.patch
perfctr: PowerPC
perfctr-ppc32-driver-update.patch
perfctr: ppc32 driver update
perfctr-ppc32-mmcr0-handling-fixes.patch
perfctr ppc32 MMCR0 handling fixes
perfctr-ppc32-update.patch
perfctr ppc32 update
perfctr-ppc32-update-2.patch
perfctr ppc32 update
perfctr-virtualised-counters.patch
perfctr: virtualised counters
perfctr-remap_page_range-fix.patch
virtual-perfctr-illegal-sleep.patch
virtual perfctr illegal sleep
make-perfctr_virtual-default-in-kconfig-match-recommendation.patch
Make PERFCTR_VIRTUAL default in Kconfig match recommendation in help text
perfctr-ifdef-cleanup.patch
perfctr ifdef cleanup
perfctr-update-2-6-kconfig-related-updates.patch
perfctr: Kconfig-related updates
perfctr-virtual-updates.patch
perfctr virtual updates
perfctr-virtual-cleanup.patch
perfctr: virtual cleanup
perfctr-ppc32-preliminary-interrupt-support.patch
perfctr ppc32 preliminary interrupt support
perfctr-update-5-6-reduce-stack-usage.patch
perfctr: reduce stack usage
perfctr-interrupt-support-kconfig-fix.patch
perfctr interrupt_support Kconfig fix
perfctr-low-level-documentation.patch
perfctr low-level documentation
perfctr-inheritance-1-3-driver-updates.patch
perfctr inheritance: driver updates
perfctr-inheritance-2-3-kernel-updates.patch
perfctr inheritance: kernel updates
perfctr-inheritance-3-3-documentation-updates.patch
perfctr inheritance: documentation updates
perfctr-inheritance-locking-fix.patch
perfctr inheritance locking fix
perfctr-api-changes-first-step.patch
perfctr API changes: first step
perfctr-virtual-update.patch
perfctr virtual update
perfctr-x86-64-ia32-emulation-fix.patch
perfctr x86-64 ia32 emulation fix
perfctr-sysfs-update-1-4-core.patch
perfctr sysfs update: core
perfctr-sysfs-update.patch
Perfctr sysfs update
perfctr-sysfs-update-2-4-x86.patch
perfctr sysfs update: x86
perfctr-sysfs-update-3-4-x86-64.patch
perfctr sysfs update: x86-64
perfctr: syscall numbers in x86-64 ia32-emulation
perfctr x86_64 native syscall numbers fix
perfctr-sysfs-update-4-4-ppc32.patch
perfctr sysfs update: ppc32
perfctr-2710-api-update-1-4-common.patch
perfctr-2.7.10 API update 1/4: common
perfctr-2710-api-update-2-4-i386.patch
perfctr-2.7.10 API update 2/4: i386
perfctr-2710-api-update-3-4-x86_64.patch
perfctr-2.7.10 API update 3/4: x86_64
perfctr-2710-api-update-4-4-ppc32.patch
perfctr-2.7.10 API update 4/4: ppc32
perfctr-api-update-1-9-physical-indexing-x86.patch
perfctr API update 1/9: physical indexing, x86
perfctr-api-update-2-9-physical-indexing-ppc32.patch
perfctr API update 2/9: physical indexing, ppc32
perfctr-api-update-3-9-cpu_control_header-x86.patch
perfctr API update 3/9: cpu_control_header, x86
perfctr-api-update-4-9-cpu_control_header-ppc32.patch
perfctr API update 4/9: cpu_control_header, ppc32
perfctr-api-update-5-9-cpu_control_header-common.patch
perfctr API update 5/9: cpu_control_header, common
perfctr-api-update-6-9-cpu_control-access-common.patch
perfctr API update 6/9: cpu_control access, common
perfctr-api-update-7-9-cpu_control-access-x86.patch
perfctr API update 7/9: cpu_control access, x86
perfctr-api-update-8-9-cpu_control-access-ppc32.patch
perfctr API update 8/9: cpu_control access, ppc32
perfctr-api-update-9-9-domain-based-read-write-syscalls.patch
perfctr API update 9/9: domain-based read/write syscalls
perfctr-ia32-syscalls-on-x86-64-fix.patch
perfctr ia32 syscalls on x86-64 fix
perfctr-cleanups-1-3-common.patch
perfctr cleanups: common
perfctr-cleanups-2-3-ppc32.patch
perfctr cleanups: ppc32
perfctr-cleanups-3-3-x86.patch
perfctr cleanups: x86
perfctr-x86-fix-and-cleanups.patch
perfctr: x86 fix and cleanups
perfctr-ppc32-fix-and-cleanups.patch
perfctr: ppc32 fix and cleanups
perfctr-64-bit-values-in-register-descriptors.patch
perfctr: 64-bit values in register descriptors
perfctr-64-bit-values-in-register-descriptors-fix.patch
perfctr-64-bit-values-in-register-descriptors fix
perfctr-mapped-state-cleanup-x86.patch
perfctr: mapped state cleanup: x86
perfctr-mapped-state-cleanup-ppc32.patch
perfctr: mapped state cleanup: ppc32
perfctr-mapped-state-cleanup-common.patch
perfctr: mapped state cleanup: common
perfctr-ppc64-arch-hooks.patch
perfctr: ppc64 arch hooks
perfctr-common-updates-for-ppc64.patch
perfctr: common updates for ppc64
perfctr-ppc64-driver-core.patch
perfctr: ppc64 driver core
sched2-cleanup-wake_idle.patch
sched: cleanup wake_idle
sched2-improve-load-balancing-pinned-tasks.patch
sched: improve load balancing pinned tasks
sched2-reduce-active-load-balancing.patch
sched: reduce active load balancing
sched2-fix-smt-scheduling-problems.patch
sched: fix SMT scheduling problems
sched2-add-debugging.patch
sched: add debugging
sched2-less-aggressive-idle-balancing.patch
sched: less aggressive idle balancing
sched2-balance-timers.patch
sched: balance timers
sched2-tweak-affine-wakeups.patch
sched: tweak affine wakeups
sched2-no-aggressive-idle-balancing.patch
sched: no aggressive idle balancing
sched2-balance-on-fork.patch
sched: balance on fork
sched2-schedstats-update-for-balance-on-fork.patch
sched: schedstats update for balance on fork
sched2-sched-tuning.patch
sched: sched tuning
sched2-sched-tuning-fix.patch
sched2-sched-tuning-fix
sched2-sched-domain-sysctl.patch
sched: sched domain sysctl
sched-uninline-task_timeslice.patch
sched: uninline task_timeslice
sched-cleanup-context-switch-locking.patch
sched: cleanup context switch locking
sched-null-domains.patch
sched: null domains
sched-remove-degenerate-domains.patch
sched: remove degenerate domains
sched-multilevel-sbe-sbf.patch
sched: multilevel sbe sbf
sched-rcu-domains.patch
sched: RCU domains
sched-consolidate-sbe-sbf.patch
sched: consolidate sbe sbf
sched-consolidate-sbe-sbf-fix.patch
sched-consolidate-sbe-sbf fix
add-do_proc_doulonglongvec_minmax-to-sysctl-functions.patch
Add do_proc_doulonglongvec_minmax to sysctl functions
add-do_proc_doulonglongvec_minmax-to-sysctl-functions-fix
add-do_proc_doulonglongvec_minmax-to-sysctl-functions fix 2
allow-x86_64-to-reenable-interrupts-on-contention.patch
Allow x86_64 to reenable interrupts on contention
i386-cpu-hotplug-updated-for-mm.patch
i386 CPU hotplug
disable-atykb-warning.patch
disable atykb "too many keys pressed" warning
export-file_ra_state_init-again.patch
Export file_ra_state_init() again
cachefs-filesystem.patch
CacheFS filesystem
numa-policies-for-file-mappings-mpol_mf_move-cachefs.patch
numa-policies-for-file-mappings-mpol_mf_move for cachefs
cachefs-release-search-records-lest-they-return-to-haunt-us.patch
CacheFS: release search records lest they return to haunt us
fix-64-bit-problems-in-cachefs.patch
Fix 64-bit problems in cachefs
cachefs-fixed-typos-that-cause-wrong-pointer-to-be-kunmapped.patch
cachefs: fixed typos that cause wrong pointer to be kunmapped
cachefs-return-the-right-error-upon-invalid-mount.patch
CacheFS: return the right error upon invalid mount
fix-cachefs-barrier-handling-and-other-kernel-discrepancies.patch
Fix CacheFS barrier handling and other kernel discrepancies
remove-error-from-linux-cachefsh.patch
Remove #error from linux/cachefs.h
cachefs-warning-fix-2.patch
cachefs warning fix 2
cachefs-linkage-fix-2.patch
cachefs linkage fix
cachefs-build-fix.patch
cachefs build fix
cachefs-documentation.patch
CacheFS documentation
add-page-becoming-writable-notification.patch
Add page becoming writable notification
add-page-becoming-writable-notification-fix.patch
do_wp_page_mk_pte_writable() fix
add-page-becoming-writable-notification-build-fix.patch
add-page-becoming-writable-notification build fix
make-page-becoming-writable-notification-a-vma-op-only.patch
Make page-becoming-writable notification a VMA-op only
provide-a-filesystem-specific-syncable-page-bit.patch
Provide a filesystem-specific sync'able page bit
provide-a-filesystem-specific-syncable-page-bit-fix.patch
provide-a-filesystem-specific-syncable-page-bit-fix
provide-a-filesystem-specific-syncable-page-bit-fix-2.patch
provide-a-filesystem-specific-syncable-page-bit-fix-2
make-afs-use-cachefs.patch
Make AFS use CacheFS
afs-cachefs-dependency-fix.patch
afs-cachefs-dependency-fix
split-general-cache-manager-from-cachefs.patch
Split general cache manager from CacheFS
turn-cachefs-into-a-cache-backend.patch
Turn CacheFS into a cache backend
rework-the-cachefs-documentation-to-reflect-fs-cache-split.patch
Rework the CacheFS documentation to reflect FS-Cache split
update-afs-client-to-reflect-cachefs-split.patch
Update AFS client to reflect CacheFS split
make-page-becoming-writable-notification-a-vma-op-only-kafs-fix.patch
Make page-becoming-writable notification a VMA-op only (kafs fix)
fscache-menuconfig-help-fix-documentation-path.patch
fscache-menuconfig-help-fix-documentation-pathc
x86-rename-apic_mode_exint.patch
kexec: x86: rename APIC_MODE_EXINT
x86-local-apic-fix.patch
kexec: x86: local apic fix
x86_64-e820-64bit.patch
kexec: x86_64: e820 64bit fix
x86-i8259-shutdown.patch
kexec: x86: i8259 shutdown: disable interrupts
x86_64-i8259-shutdown.patch
kexec: x86_64: add i8259 shutdown method
x86-apic-virtwire-on-shutdown.patch
kexec: x86: resture apic virtual wire mode on shutdown
x86_64-apic-virtwire-on-shutdown.patch
kexec: x86_64: restore apic virtual wire mode on shutdown
vmlinux-fix-physical-addrs.patch
kexec: vmlinux: fix physical addresses
x86-vmlinux-fix-physical-addrs.patch
kexec: x86: vmlinux: fix physical addresses
x86_64-vmlinux-fix-physical-addrs.patch
kexec: x86_64: vmlinux: fix physical addresses
x86-config-kernel-start.patch
kexec: x86: add CONFIG_PYSICAL_START
kexec-reserve-bootmem-fix-for-booting-nondefault-location-kernel.patch
kexec: reserve Bootmem fix for booting nondefault location kernel
x86_64-config-kernel-start.patch
kexec: x86_64: add CONFIG_PHYSICAL_START
kexec-kexec-generic.patch
kexec: add kexec syscalls
kexec-kexec-generic-kexec-use-unsigned-bitfield.patch
kexec: use unsigned bitfield
x86-machine_shutdown.patch
kexec: x86: factor out apic shutdown code
x86-kexec.patch
kexec: x86 kexec core
x86-crashkernel.patch
crashdump: x86 crashkernel option
x86-crashkernel-fix.patch
kexec: fix for broken kexec on panic
x86_64-machine_shutdown.patch
kexec: x86_64: factor out apic shutdown code
x86_64-kexec.patch
kexec: x86_64 kexec implementation
x86_64-crashkernel.patch
crashdump: x86_64: crashkernel option
kexec-ppc-support.patch
kexec: kexec ppc support
kexec-ppc-fix-noret_type.patch
kexec: ppc: fix NORET_TYPE
x86-crash_shutdown-nmi-shootdown.patch
crashdump: x86: add NMI handler to capture other CPUs
x86-crash_shutdown-snapshot-registers.patch
kexec: x86: snapshot registers during crash shutdown
x86-crash_shutdown-apic-shutdown.patch
kexec: x86 shutdown APICs during crash_shutdown
kdump-export-crash-notes-section-address-through.patch
Kdump: Export crash notes section address through sysfs
kdump-export-crash-notes-section-address-through-x86_64-fix.patch
kdump-export-crash-notes-section-address-through x86_64 fix
kdump-nmi-handler-segment-selector-stack.patch
kdump: NMI handler segment selector, stack pointer fix
kdump-documentation-for-kdump.patch
kdump: Documentation for Kdump
kdump-retrieve-saved-max-pfn.patch
kdump: Retrieve saved max pfn
kdump-kconfig-for-kdump.patch
kdump: Kconfig
kdump-routines-for-copying-dump-pages.patch
kdump: Routines for copying dump pages
kdump-retrieve-elfcorehdr-address-from-command.patch
Retrieve elfcorehdr address from command line
kdump-access-dump-file-in-elf-format.patch
kdump: Access dump file in elf format (/proc/vmcore)
kdump-parse-elf32-headers-and-export-through.patch
kdump: Parse elf32 headers and export through /proc/vmcore
kdump-accessing-dump-file-in-linear-raw-format.patch
kdump: Accessing dump file in linear raw format (/dev/oldmem)
kdump-cleanups-for-dump-file-access-in-linear.patch
kdump: cleanups for dump file access in linear raw format
kdump-sysrq-trigger-mechanism-for-kexec-based-crashdumps.patch
kdump: sysrq trigger mechanism for kexec based crashdumps
reiser4-sb_sync_inodes.patch
reiser4: vfs: add super_operations.sync_inodes()
reiser4-allow-drop_inode-implementation.patch
reiser4: export vfs inode.c symbols
reiser4-truncate_inode_pages_range.patch
reiser4: vfs: add truncate_inode_pages_range()
reiser4-export-remove_from_page_cache.patch
reiser4: export pagecache add/remove functions to modules
reiser4-export-page_cache_readahead.patch
reiser4: export page_cache_readahead to modules
reiser4-reget-page-mapping.patch
reiser4: vfs: re-check page->mapping after calling try_to_release_page()
reiser4-rcu-barrier.patch
reiser4: add rcu_barrier() synchronization point
reiser4-rcu-barrier-license-fix.patch
reiser4-rcu-barrier-license-fix
reiser4-export-inode_lock.patch
reiser4: export inode_lock to modules
reiser4-export-pagevec-funcs.patch
reiser4: export pagevec functions to modules
reiser4-export-radix_tree_preload.patch
reiser4: export radix_tree_preload() to modules
reiser4-export-find_get_pages.patch
reiser4-radix_tree_lookup_slot.patch
reiser4: add radix_tree_lookup_slot()
reiser4-include-reiser4.patch
reiser4: add to build system
reiser4-doc.patch
reiser4: documentation
reiser4-only.patch
reiser4: main fs
reiser4-kconfig-help-cleanup.patch
reiser4 Kconfig help cleanup
add-acpi-based-floppy-controller-enumeration.patch
Add ACPI-based floppy controller enumeration.
possible-dcache-bug-debugging-patch.patch
Possible dcache BUG: debugging patch
serial-add-support-for-non-standard-xtals-to-16c950-driver.patch
serial: add support for non-standard XTALs to 16c950 driver
add-support-for-possio-gcc-aka-pcmcia-siemens-mc45.patch
Add support for Possio GCC AKA PCMCIA Siemens MC45
serial-mri-mri-pcids1-dual-port-serial-card.patch
serial: MRi MRI-PCIDS1 dual port serial card
remove-lock_section-from-x86_64-spin_lock-asm.patch
remove LOCK_SECTION from x86_64 spin_lock asm
kfree_skb-dump_stack.patch
kfree_skb-dump_stack
minimal-ide-disk-updates.patch
Minimal ide-disk updates
md-close-a-small-race-in-md-thread-deregistration.patch
md: close a small race in md thread deregistration
md-remove-a-number-of-misleading-calls-to-md_bug.patch
md: remove a number of misleading calls to MD_BUG
md-merge-md_enter_safemode-into-md_check_recovery.patch
md: merge md_enter_safemode into md_check_recovery
md-improve-locking-on-safemode-and-move-superblock-writes.patch
md: improve locking on 'safemode' and move superblock writes
md-improve-the-interface-to-sync_request.patch
md: improve the interface to sync_request
md-optimised-resync-using-bitmap-based-intent-logging.patch
md: optimised resync using Bitmap based intent logging
md-optimised-resync-using-bitmap-based-intent-logging-mempool-fix.patch
md-optimised-resync-using-bitmap-based-intent-logging-mempool-fix
md-a-couple-of-tidyups-relating-to-the-bitmap-file.patch
md: a couple of tidyups relating to the bitmap file.
md-call-bitmap_daemon_work-regularly.patch
md: call bitmap_daemon_work regularly
md-print-correct-pid-for-newly-created-bitmap-writeback-daemon.patch
md: print correct pid for newly created bitmap-writeback-daemon.
md-minor-code-rearrangement-in-bitmap_init_from_disk.patch
md: minor code rearrangement in bitmap_init_from_disk
md-make-sure-md-bitmap-is-cleared-on-a-clean-start.patch
md: make sure md bitmap is cleared on a clean start.
md-printk-fix.patch
md printk fix
md-improve-debug-printing-of-bitmap-superblock.patch
md: improve debug-printing of bitmap superblock.
md-check-return-value-of-write_page-rather-than-ignore-it.patch
md: check return value of write_page, rather than ignore it
md-enable-the-bitmap-write-back-daemon-and-wait-for-it.patch
md: enable the bitmap write-back daemon and wait for it.
md-dont-skip-bitmap-pages-due-to-lack-of-bit-that-we-just-cleared.patch
md: don't skip bitmap pages due to lack of bit that we just cleared.
md-optimised-resync-using-bitmap-based-intent-logging-fix.patch
md-optimised-resync-using-bitmap-based-intent-logging fix
md-raid1-support-for-bitmap-intent-logging.patch
md: raid1 support for bitmap intent logging
md-fix-bug-when-raid1-attempts-a-partial-reconstruct.patch
md: fix bug when raid1 attempts a partial reconstruct.
md-raid1-support-for-bitmap-intent-logging-fix.patch
md: initialise sync_blocks in raid1 resync
md-optimise-reconstruction-when-re-adding-a-recently-failed-drive.patch
md: optimise reconstruction when re-adding a recently failed drive.
md-fix-deadlock-due-to-md-thread-processing-delayed-requests.patch
md: fix deadlock due to md thread processing delayed requests.
md-allow-md-intent-bitmap-to-be-stored-near-the-superblock.patch
md: allow md intent bitmap to be stored near the superblock.
md-allow-md-to-update-multiple-superblocks-in-parallel.patch
md: allow md to update multiple superblocks in parallel.
detect-atomic-counter-underflows.patch
detect atomic counter underflows
docbook-changes-and-extensions-to-the-kernel-documentation.patch
DocBook: changes and extensions to the kernel documentation
docbook-fix-void-xml-tag.patch
DocBook: fix <void/> xml tag
docbook-fix-some-descriptions.patch
DocBook: fix some descriptions
docbook-use-informalexample-for-examples.patch
DocBook: use <informalexample> for examples
docbook-remove-obsolete-templates.patch
DocBook: remove obsolete templates
docbook-use-xmlto-to-process-the-docbook-files.patch
DocBook: Use xmlto to process the DocBook files.
post-halloween-doc.patch
post halloween doc
fuse-maintainers-kconfig-and-makefile-changes.patch
FUSE - MAINTAINERS, Kconfig and Makefile changes
fuse-core.patch
FUSE - core
fuse-device-functions.patch
FUSE - device functions
fuse-device-functions-abi-version-change.patch
FUSE: ABI version change
fuse-device-functions-comments-and-documentation.patch
FUSE: comments and documentation
fuse-device-functions-cleanup.patch
FUSE: trivial cleanups
fuse-read-only-operations.patch
FUSE - read-only operations
fuse-read-only-operations-add-offset-to-fuse_dirent.patch
FUSE: add offset to fuse_dirent
fuse-read-only-operations-readdir-fixes.patch
FUSE: readdir fixes
fuse-read-write-operations.patch
FUSE - read-write operations
fuse-file-operations.patch
FUSE - file operations
fuse-mount-options.patch
FUSE - mount options
fuse-mount-options-fix.patch
fuse: fix busy inodes after unmount
fuse-mount-options-comments-and-documentation.patch
FUSE: comments and documentation
fuse-mount-options-fix-cleanup.patch
FUSE: trivial cleanups
fuse-mount-options-fix-fix.patch
FUSE: fix locking for background list
fuse-extended-attribute-operations.patch
FUSE - extended attribute operations
fuse-add-padding.patch
FUSE: add padding
fuse-readpages-operation.patch
FUSE - readpages operation
fuse-nfs-export.patch
FUSE - NFS export
fuse-direct-i-o.patch
FUSE - direct I/O
fuse-direct-i-o-fix-warning-on-x86_64.patch
FUSE: fix warning on x86_64
fuse-transfer-readdir-data-through-device.patch
fuse: transfer readdir data through device
fuse-add-fsync-operation-for-directories.patch
FUSE: add fsync operation for directories
drivers-isdn-divert-isdn_divertc-make-5-functions-static.patch
drivers/isdn/divert/isdn_divert.c: make 5 functions static
drivers-isdn-capi-make-some-code-static.patch
drivers/isdn/capi/: make some code static
drivers-scsi-pas16c-make-code-static.patch
drivers/scsi/pas16.c: make code static
i386-x86_64-early_printkc-make-early_serial_base-static.patch
i386/x86_64 early_printk.c: make early_serial_base static
kernel-exitc-make-exit_mm-static.patch
kernel/exit.c: make exit_mm static
cyrix-eliminate-bad-section-references.patch
cyrix: eliminate bad section references
drivers-media-video-tvaudioc-make-some-variables-static.patch
drivers/media/video/tvaudio.c: make some variables static
drivers-isdn-sc-possible-cleanups.patch
drivers/isdn/sc/: possible cleanups
drivers-isdn-pcbit-possible-cleanups.patch
drivers/isdn/pcbit/: possible cleanups
drivers-isdn-i4l-possible-cleanups.patch
drivers/isdn/i4l/: possible cleanups
unexport-mca_find_device_by_slot.patch
unexport mca_find_device_by_slot
drivers-isdn-hardware-avm-misc-cleanups.patch
drivers/isdn/hardware/avm/: misc cleanups
drivers-isdn-act2000-capic-if-0-an-unused-function.patch
drivers/isdn/act2000/capi.c: #if 0 an unused function
tpm-fix-gcc-printk-warnings.patch
tpm: fix gcc printk warnings
x86-64-add-memcpy-memset-prototypes.patch
x86-64: add memcpy/memset prototypes
au1100fb-convert-to-c99-inits.patch
au1100fb: convert to C99 inits.
reiserfs-use-null-instead-of-0.patch
reiserfs: use NULL instead of 0
comments-on-locking-of-task-comm.patch
comments on locking of task->comm
riottyc-cleanups-and-warning-fix.patch
riotty.c cleanups and warning fix
fixup-a-comment-still-refering-to-verify_area.patch
fix up a comment still refering to verify_area
char-ds1620-use-msleep-instead-of-schedule_timeout.patch
char/ds1620: use msleep() instead of schedule_timeout()
char-tty_io-replace-schedule_timeout-with-msleep_interruptible.patch
char/tty_io: replace schedule_timeout() with msleep_interruptible()
kernel-timer-fix-msleep_interruptible-comment.patch
kernel/timer: fix msleep_interruptible() comment
ixj-compile-warning-cleanup.patch
ixj* - compile warning cleanup
spelling-cleanups-in-shrinker-code.patch
Spelling cleanups in shrinker code
init-do_mounts_initrdc-fix-sparse-warning.patch
init/do_mounts_initrd.c: fix sparse warning
arch-i386-kernel-trapsc-fix-sparse-warnings.patch
arch/i386/kernel/traps.c: fix sparse warnings
arch-i386-kernel-apmc-fix-sparse-warnings.patch
arch/i386/kernel/apm.c: fix sparse warnings
arch-i386-mm-faultc-fix-sparse-warnings.patch
arch/i386/mm/fault.c: fix sparse warnings
arch-i386-crypto-aesc-fix-sparse-warnings.patch
arch/i386/crypto/aes.c: fix sparse warnings
codingstyle-trivial-whitespace-fixups.patch
CodingStyle: trivial whitespace fixups
small-partitions-msdos-cleanups.patch
small partitions/msdos cleanups
remove-redundant-null-check-before-before-kfree-in.patch
remove redundant NULL check before before kfree() in kernel/sysctl.c
update-ross-biro-bouncing-email-address.patch
update Ross Biro bouncing email address
get-rid-of-redundant-null-checks-before-kfree-in-arch-i386.patch
get rid of redundant NULL checks before kfree() in arch/i386/
remove-redundant-null-checks-before-kfree-in-sound-and.patch
remove redundant NULL checks before kfree() in sound/ and avoid casting pointers about to be kfree()'ed
x86-geode-support-fixes.patch
x86: geode support fixes
drivers-scsi-initioc-cleanups.patch
drivers/scsi/initio.c: cleanups
dont-do-pointless-null-checks-and-casts-before-kfree.patch
selinux: kfree cleanup
drivers-char-isicomc-section-fixes.patch
drivers/char/isicom.c: section fixes
sound-oss-cleanups.patch
sound/oss/: cleanups
sound-oss-cleanups-fix.patch
nm256 oss build failure
sound-oss-rme96xxc-remove-kernel-22-ifs.patch
sound/oss/rme96xx.c: remove kernel 2.2 #if's
drivers-char-mwave-tp3780ic-remove-kernel-22-ifs.patch
drivers/char/mwave/tp3780i.c: remove kernel 2.2 #if's
drivers-net-skfp-cleanups.patch
drivers/net/skfp/: cleanups
net-atm-resourcesc-remove-__free_atm_dev.patch
Subject: [2.6 patch] net/atm/resources.c: remove __free_atm_dev
fix-ncr53c9xc-compile-warning.patch
fix NCR53C9x.c compile warning
mm-mmapnommuc-several-unexports.patch
mm/{mmap,nommu}.c: several unexports
unexport-hugetlb_total_pages.patch
unexport hugetlb_total_pages
unexport-clear_page_dirty_for_io.patch
unexport clear_page_dirty_for_io
mm-filemapc-make-sync_page_range_nolock-static.patch
mm/filemap.c: make sync_page_range_nolock static
mm-filemapc-make-generic_file_direct_io-static.patch
mm/filemap.c: make generic_file_direct_IO static
remove-exports-for-oem-modules.patch
remove exports for oem modules
mm-page_allocc-unexport-nr_swap_pages.patch
unexport nr_swap_pages
unexport-console_unblank.patch
unexport console_unblank
mm-swapc-unexport-vm_acct_memory.patch
mm/swap.c: unexport vm_acct_memory
mm-swapfilec-unexport-total_swap_pages.patch
mm/swapfile.c: unexport total_swap_pages
mm-swap_statec-unexport-swapper_space.patch
mm/swap_state.c: unexport swapper_space
unexport-slab_reclaim_pages.patch
unexport slab_reclaim_pages
unexport-idle_cpu.patch
unexport idle_cpu
^ permalink raw reply [flat|nested] 27+ messages in thread
* Re: 2.6.12-rc2-mm2
2005-04-08 10:08 2.6.12-rc2-mm2 Andrew Morton
@ 2005-04-08 11:46 ` Rafael J. Wysocki
2005-04-08 16:44 ` 2.6.12-rc2-mm2 Rafael J. Wysocki
2005-04-08 12:25 ` 2.6.12-rc2-mm2 Indrek Kruusa
` (8 subsequent siblings)
9 siblings, 1 reply; 27+ messages in thread
From: Rafael J. Wysocki @ 2005-04-08 11:46 UTC (permalink / raw)
To: Andrew Morton; +Cc: linux-kernel
On Friday, 8 of April 2005 12:08, Andrew Morton wrote:
>
> ftp://ftp.kernel.org/pub/linux/kernel/people/akpm/patches/2.6/2.6.12-rc2/2.6.12-rc2-mm2/
>
>
> - Although small, bk-audit.patch was causing conflits with a couple of
> other projects. Dropped for now.
>
> - Greg is not using bk now, so bk-pci.patch, bk-i2c.patch,
> bk-driver-core.patch and bk-usb.patch have been replaced with gregkh-*.patch
> in -mm.
>
> - Largeish x86_64 update
It does not compile on a uniprocessor x86-64:
CC arch/x86_64/kernel/process.o
CC arch/x86_64/kernel/semaphore.o
CC arch/x86_64/kernel/signal.o
AS arch/x86_64/kernel/entry.o
CC arch/x86_64/kernel/traps.o
CC arch/x86_64/kernel/irq.o
CC arch/x86_64/kernel/ptrace.o
CC arch/x86_64/kernel/time.o
CC arch/x86_64/kernel/ioport.o
CC arch/x86_64/kernel/ldt.o
CC arch/x86_64/kernel/setup.o
arch/x86_64/kernel/setup.c: In function `amd_detect_cmp':
arch/x86_64/kernel/setup.c:759: error: `cpu_core_id' undeclared (first use in this function)
arch/x86_64/kernel/setup.c:759: error: (Each undeclared identifier is reported only once
arch/x86_64/kernel/setup.c:759: error: for each function it appears in.)
make[1]: *** [arch/x86_64/kernel/setup.o] Error 1
make: *** [arch/x86_64/kernel] Error 2
Greets,
Rafael
--
- Would you tell me, please, which way I ought to go from here?
- That depends a good deal on where you want to get to.
-- Lewis Carroll "Alice's Adventures in Wonderland"
^ permalink raw reply [flat|nested] 27+ messages in thread
* Re: 2.6.12-rc2-mm2
@ 2005-04-08 11:50 Michael Thonke
0 siblings, 0 replies; 27+ messages in thread
From: Michael Thonke @ 2005-04-08 11:50 UTC (permalink / raw)
To: linux mailing-list
Hello Andrew,
along the 2.6.12-rcX-mmX PCI-Express is not usable at all with
mm-patchsets. I posted some days ago the problem taht
the IRQs get not regonized by the kernel also with pci=routeirq nothing
helped.
The problem still the same and some new problems now with 2.6.12-rc2-mm2
in addition.
This computer has an Intel Pentium 4 630 with HT,EIST and EMT64 enabled.
In 2.6.12-rc2 everything works perfect.
So I post my dmesg output maybe you can see some interesting things
there. I hope you'll find the issue or bug..whatever hope that
its possible to sort the problems out.
Thanks in Advanced
Now I post the 2.6.12-rc2-mm2 and after that the 2.6.12-rc2 vanilla
kernel output
2.6.12-rc2-mm2 output:
Bootdata ok (command line is root=/dev/md1 vga=794 quiet)
Linux version 2.6.12-rc2-mm2-md1 (root@ioGL64NX) (gcc-Version 3.4.3
20041125 (Gentoo Linux 3.4.3-r1, ssp-3.4.3-0, pie-8.7.7)) #2 SMP PREEMPT
Fri Apr 8 13:35:42 CEST 2005
BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
BIOS-e820: 00000000000e4000 - 0000000000100000 (reserved)
BIOS-e820: 0000000000100000 - 000000003ffb0000 (usable)
BIOS-e820: 000000003ffb0000 - 000000003ffbe000 (ACPI data)
BIOS-e820: 000000003ffbe000 - 000000003fff0000 (ACPI NVS)
BIOS-e820: 000000003fff0000 - 0000000040000000 (reserved)
BIOS-e820: 00000000ffb00000 - 0000000100000000 (reserved)
ACPI: RSDP (v002 ACPIAM ) @
0x00000000000fafa0
ACPI: XSDT (v001 A M I OEMXSDT 0x02000503 MSFT 0x00000097) @
0x000000003ffb0100
ACPI: FADT (v003 A M I OEMFACP 0x02000503 MSFT 0x00000097) @
0x000000003ffb0290
ACPI: MADT (v001 A M I OEMAPIC 0x02000503 MSFT 0x00000097) @
0x000000003ffb0390
ACPI: OEMB (v001 A M I AMI_OEM 0x02000503 MSFT 0x00000097) @
0x000000003ffbe040
ACPI: MCFG (v001 A M I OEMMCFG 0x02000503 MSFT 0x00000097) @
0x000000003ffb6c40
ACPI: DSDT (v001 A0144 A0144000 0x00000000 INTL 0x02002026) @
0x0000000000000000
On node 0 totalpages: 262064
DMA zone: 4096 pages, LIFO batch:1
Normal zone: 257968 pages, LIFO batch:16
HighMem zone: 0 pages, LIFO batch:1
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
Processor #0 15:4 APIC version 16
ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
Processor #1 15:4 APIC version 16
ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ACPI: IRQ0 used by override.
ACPI: IRQ2 used by override.
ACPI: IRQ9 used by override.
Setting APIC routing to flat
Using ACPI (MADT) for SMP configuration information
Allocating PCI resources starting at 40000000 (gap: 40000000:bfb00000)
Built 1 zonelists
Initializing CPU#0
Kernel command line: root=/dev/md1 vga=794 quiet console=tty0
PID hash table entries: 4096 (order: 12, 131072 bytes)
time.c: Using 1.193182 MHz PIT timer.
time.c: Detected 3527.408 MHz processor.
Console: colour dummy device 80x25
Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes)
Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes)
Memory: 1024964k/1048256k available (3240k kernel code, 22664k reserved,
1218k data, 212k init)
Calibrating delay loop... 6963.20 BogoMIPS (lpj=3481600)
Security Framework v1.0.0 initialized
Capability LSM initialized
Mount-cache hash table entries: 256
CPU: Trace cache: 12K uops, L1 D cache: 16K
CPU: L2 cache: 2048K
using mwait in idle threads.
CPU: Physical Processor ID: 0
CPU0: Thermal monitoring enabled (TM1)
Using IO APIC NMI watchdog
activating NMI Watchdog ... done.
Using local APIC timer interrupts.
Detected 13.778 MHz APIC timer.
Booting processor 1/1 rip 6000 rsp ffff81003ff35f58
Initializing CPU#1
Calibrating delay loop... 7045.12 BogoMIPS (lpj=3522560)
CPU: Trace cache: 12K uops, L1 D cache: 16K
CPU: L2 cache: 2048K
CPU: Physical Processor ID: 0
CPU1: Thermal monitoring enabled (TM1)
Intel(R) Pentium(R) 4 CPU 3.20GHz stepping 03
Synced TSC of CPU 1 difference 107374180328
APIC error on CPU1: 00(40)
Brought up 2 CPUs
time.c: Using PIT/TSC based timekeeping.
CPU0 attaching sched-domain:
domain 0: span 3
groups: 1 2
CPU1 attaching sched-domain:
domain 0: span 3
groups: 2 1
NET: Registered protocol family 16
PCI: Using configuration type 1
PCI: Using MMCONFIG at e0000000
mtrr: v2.0 (20020519)
ACPI: Subsystem revision 20050309
ACPI: Interpreter enabled
ACPI: Using IOAPIC for interrupt routing
ACPI: PCI Root Bridge [PCI0] (0000:00)
PCI: Probing PCI hardware (bus 00)
ACPI: Assume root bridge [\_SB_.PCI0] segment is 0
PCI: Ignoring BAR0-3 of IDE controller 0000:00:1f.1
Boot video device is 0000:04:00.0
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: Can't get handler for 0000:00:1b.0
ACPI: Can't get handler for 0000:00:1f.3
ACPI: Can't get handler for 0000:04:00.0
ACPI: Can't get handler for 0000:02:00.0
ACPI: Can't get handler for 0000:01:09.0
ACPI: Can't get handler for 0000:01:0a.0
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P1._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P3._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P4._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P5._PRT]
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 *10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 *7 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 *5 6 7 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKD] (IRQs *3 4 5 6 7 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 11 12 14 15) *0,
disabled.
ACPI: PCI Interrupt Link [LNKF] (IRQs 3 *4 5 6 7 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 10 11 12 14 15) *0,
disabled.
ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 10 *11 12 14 15)
Linux Plug and Play Support v0.97 (c) Adam Belay
pnp: PnP ACPI init
ACPI: No ACPI bus support for 00:00
ACPI: No ACPI bus support for 00:01
ACPI: No ACPI bus support for 00:02
ACPI: No ACPI bus support for 00:03
ACPI: No ACPI bus support for 00:04
ACPI: No ACPI bus support for 00:05
ACPI: No ACPI bus support for 00:06
ACPI: No ACPI bus support for 00:07
ACPI: No ACPI bus support for 00:08
ACPI: No ACPI bus support for 00:09
ACPI: No ACPI bus support for 00:0a
ACPI: No ACPI bus support for 00:0b
pnp: PnP ACPI: found 12 devices
SCSI subsystem initialized
usbcore: registered new driver usbfs
usbcore: registered new driver hub
PCI: Using ACPI for IRQ routing
PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a
report
pnp: 00:06: ioport range 0x290-0x297 has been reserved
IA32 emulation $Id: sys_ia32.c,v 1.32 2002/03/24 13:02:28 ak Exp $
inotify device minor=63
SGI XFS with large block/inode numbers, no debug enabled
Initializing Cryptographic API
ACPI: PCI Interrupt 0000:00:01.0[A] -> GSI 16 (level, low) -> IRQ 169
PCI: Setting latency timer of device 0000:00:01.0 to 64
assign_interrupt_mode Found MSI capability
Allocate Port Service[pcie00]
ACPI: No ACPI bus support for pcie00
Allocate Port Service[pcie03]
ACPI: No ACPI bus support for pcie03
ACPI: PCI Interrupt 0000:00:1c.0[A] -> GSI 16 (level, low) -> IRQ 169
PCI: Setting latency timer of device 0000:00:1c.0 to 64
assign_interrupt_mode Found MSI capability
Allocate Port Service[pcie00]
ACPI: No ACPI bus support for pcie00
Allocate Port Service[pcie02]
ACPI: No ACPI bus support for pcie02
Allocate Port Service[pcie03]
ACPI: No ACPI bus support for pcie03
ACPI: PCI Interrupt 0000:00:1c.1[B] -> GSI 17 (level, low) -> IRQ 201
PCI: Setting latency timer of device 0000:00:1c.1 to 64
assign_interrupt_mode Found MSI capability
Allocate Port Service[pcie00]
ACPI: No ACPI bus support for pcie00
Allocate Port Service[pcie02]
ACPI: No ACPI bus support for pcie02
Allocate Port Service[pcie03]
ACPI: No ACPI bus support for pcie03
vesafb: framebuffer at 0xd8000000, mapped to 0xffffc20010100000, using
5120k, total 131072k
vesafb: mode is 1280x1024x16, linelength=2560, pages=1
vesafb: scrolling: redraw
vesafb: Truecolor: size=0:5:6:5, shift=0:11:5:0
Console: switching to colour frame buffer device 160x64
fb0: VESA VGA frame buffer device
ACPI: No ACPI bus support for vesafb.0
fb1: Virtual frame buffer device, using 1024K of video memory
ACPI: No ACPI bus support for vfb.0
ACPI: CPU0 (power states: C1[C1])
ACPI: Processor [CPU1] (supports 8 throttling states)
ACPI: CPU1 (power states: C1[C1])
Real Time Clock Driver v1.12
io scheduler noop registered
io scheduler cfq registered
ACPI: Floppy Controller [FDC] at I/O 0x3f0-0x3f5, 0x3f7 irq 6 dma channel 2
Floppy drive(s): fd0 is 1.44M
FDC 0 is a post-1991 82077
ACPI: No ACPI bus support for floppy.0
RAMDISK driver initialized: 4 RAM disks of 4096K size 1024 blocksize
loop: loaded (max 8 devices)
ub: sizeof ub_scsi_cmd 88 ub_dev 2672
usbcore: registered new driver ub
ACPI: PCI Interrupt 0000:02:00.0[A] -> GSI 17 (level, low) -> IRQ 201
sk98lin: Network Device Driver v8.15.1.3
(C)Copyright 1999-2005 Marvell(R).
ACPI: PCI Interrupt 0000:02:00.0[A] -> GSI 17 (level, low) -> IRQ 201
PCI: Setting latency timer of device 0000:02:00.0 to 64
eth0: Marvell Yukon 88E8053 Gigabit Ethernet Controller
PrefPort:A RlmtMode:Check Link State
netconsole: not configured, aborting
Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
ICH6: IDE controller at PCI slot 0000:00:1f.1
ACPI: PCI Interrupt 0000:00:1f.1[A] -> GSI 18 (level, low) -> IRQ 217
ICH6: chipset revision 4
ICH6: not 100% native mode: will probe irqs later
ide0: BM-DMA at 0xffa0-0xffa7, BIOS settings: hda:DMA, hdb:pio
ide1: BM-DMA at 0xffa8-0xffaf, BIOS settings: hdc:pio, hdd:pio
Probing IDE interface ide0...
hda: PLEXTOR DVDR PX-716A, ATAPI CD/DVD-ROM drive
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
ACPI: No ACPI bus support for 0.0
Probing IDE interface ide1...
hda: ATAPI 40X DVD-ROM DVD-R CD-R/RW drive, 8192kB Cache, UDMA(66)
Uniform CD-ROM driver Revision: 3.20
libata version 1.10 loaded.
ata_piix version 1.03
ACPI: PCI Interrupt 0000:00:1f.2[B] -> GSI 19 (level, low) -> IRQ 225
PCI: Setting latency timer of device 0000:00:1f.2 to 64
ata1: SATA max UDMA/133 cmd 0xAC00 ctl 0xA882 bmdma 0xA400 irq 225
ata2: SATA max UDMA/133 cmd 0xA800 ctl 0xA482 bmdma 0xA408 irq 225
ata1: dev 0 cfg 49:2f00 82:346b 83:7f01 84:4003 85:3c69 86:3e01 87:4003
88:20ff
ata1: dev 0 ATA, max UDMA7, 234493056 sectors: lba48
ata1: dev 1 cfg 49:2f00 82:346b 83:7f01 84:4003 85:3c69 86:3e01 87:4003
88:20ff
ata1: dev 1 ATA, max UDMA7, 312581808 sectors: lba48
ata1: dev 0 configured for UDMA/133
ata1: dev 1 configured for UDMA/133
scsi0 : ata_piix
ata2: dev 0 cfg 49:2f00 82:346b 83:7f01 84:4003 85:3c69 86:3e01 87:4003
88:20ff
ata2: dev 0 ATA, max UDMA7, 234493056 sectors: lba48
ata2: dev 1 cfg 49:2f00 82:346b 83:7f01 84:4003 85:3c69 86:3e01 87:4003
88:20ff
ata2: dev 1 ATA, max UDMA7, 312581808 sectors: lba48
ata2: dev 0 configured for UDMA/133
ata2: dev 1 configured for UDMA/133
scsi1 : ata_piix
Vendor: ATA Model: SAMSUNG SP1213C Rev: SV10
Type: Direct-Access ANSI SCSI revision: 05
ACPI: No ACPI bus support for 0:0:0:0
Vendor: ATA Model: SAMSUNG SP1614C Rev: SW10
Type: Direct-Access ANSI SCSI revision: 05
ACPI: No ACPI bus support for 0:0:1:0
Vendor: ATA Model: SAMSUNG SP1213C Rev: SV10
Type: Direct-Access ANSI SCSI revision: 05
ACPI: No ACPI bus support for 1:0:0:0
Vendor: ATA Model: SAMSUNG SP1614C Rev: SW10
Type: Direct-Access ANSI SCSI revision: 05
ACPI: No ACPI bus support for 1:0:1:0
SCSI device sda: 234493056 512-byte hdwr sectors (120060 MB)
SCSI device sda: drive cache: write back
SCSI device sda: 234493056 512-byte hdwr sectors (120060 MB)
SCSI device sda: drive cache: write back
sda: sda1 sda2 < sda5 sda6 sda7 >
Attached scsi disk sda at scsi0, channel 0, id 0, lun 0
SCSI device sdb: 312581808 512-byte hdwr sectors (160042 MB)
SCSI device sdb: drive cache: write back
SCSI device sdb: 312581808 512-byte hdwr sectors (160042 MB)
SCSI device sdb: drive cache: write back
sdb: sdb1 sdb2 < sdb5 >
Attached scsi disk sdb at scsi0, channel 0, id 1, lun 0
SCSI device sdc: 234493056 512-byte hdwr sectors (120060 MB)
SCSI device sdc: drive cache: write back
SCSI device sdc: 234493056 512-byte hdwr sectors (120060 MB)
SCSI device sdc: drive cache: write back
sdc: sdc1 sdc2 < sdc5 sdc6 >
Attached scsi disk sdc at scsi1, channel 0, id 0, lun 0
SCSI device sdd: 312581808 512-byte hdwr sectors (160042 MB)
SCSI device sdd: drive cache: write back
SCSI device sdd: 312581808 512-byte hdwr sectors (160042 MB)
SCSI device sdd: drive cache: write back
sdd: sdd1 sdd2 < sdd5 >
Attached scsi disk sdd at scsi1, channel 0, id 1, lun 0
Attached scsi generic sg0 at scsi0, channel 0, id 0, lun 0, type 0
Attached scsi generic sg1 at scsi0, channel 0, id 1, lun 0, type 0
Attached scsi generic sg2 at scsi1, channel 0, id 0, lun 0, type 0
Attached scsi generic sg3 at scsi1, channel 0, id 1, lun 0, type 0
usbmon: debugs is not available
ACPI: PCI Interrupt 0000:00:1d.7[A] -> GSI 23 (level, low) -> IRQ 233
PCI: Setting latency timer of device 0000:00:1d.7 to 64
ehci_hcd 0000:00:1d.7: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6
Family) USB2 EHCI Controller
ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1
ehci_hcd 0000:00:1d.7: irq 233, io mem 0xd2cff800
PCI: cache line size of 128 is not supported by device 0000:00:1d.7
ehci_hcd 0000:00:1d.7: USB 2.0 initialized, EHCI 1.00, driver 10 Dec 2004
ACPI: No ACPI bus support for usb1
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 8 ports detected
ACPI: No ACPI bus support for 1-0:1.0
USB Universal Host Controller Interface driver v2.2
ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 23 (level, low) -> IRQ 233
PCI: Setting latency timer of device 0000:00:1d.0 to 64
uhci_hcd 0000:00:1d.0: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6
Family) USB UHCI #1
uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
uhci_hcd 0000:00:1d.0: irq 233, io base 0x00009880
ACPI: No ACPI bus support for usb2
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 2 ports detected
ACPI: No ACPI bus support for 2-0:1.0
ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 19 (level, low) -> IRQ 225
PCI: Setting latency timer of device 0000:00:1d.1 to 64
uhci_hcd 0000:00:1d.1: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6
Family) USB UHCI #2
uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3
uhci_hcd 0000:00:1d.1: irq 225, io base 0x00009c00
ACPI: No ACPI bus support for usb3
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 2 ports detected
ACPI: No ACPI bus support for 3-0:1.0
ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 217
PCI: Setting latency timer of device 0000:00:1d.2 to 64
uhci_hcd 0000:00:1d.2: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6
Family) USB UHCI #3
uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4
uhci_hcd 0000:00:1d.2: irq 217, io base 0x0000a000
ACPI: No ACPI bus support for usb4
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 2 ports detected
ACPI: No ACPI bus support for 4-0:1.0
ACPI: PCI Interrupt 0000:00:1d.3[D] -> GSI 16 (level, low) -> IRQ 169
PCI: Setting latency timer of device 0000:00:1d.3 to 64
uhci_hcd 0000:00:1d.3: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6
Family) USB UHCI #4
uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 5
uhci_hcd 0000:00:1d.3: irq 169, io base 0x0000a080
ACPI: No ACPI bus support for usb5
hub 5-0:1.0: USB hub found
hub 5-0:1.0: 2 ports detected
ACPI: No ACPI bus support for 5-0:1.0
Initializing USB Mass Storage driver...
usbcore: registered new driver usb-storage
USB Mass Storage support registered.
usbcore: registered new driver usbhid
drivers/usb/input/hid-core.c: v2.01:USB HID core driver
mice: PS/2 mouse device common for all mice
md: linear personality registered as nr 1
md: raid0 personality registered as nr 2
md: raid1 personality registered as nr 3
md: raid5 personality registered as nr 4
raid5: automatically using best checksumming function: generic_sse
generic_sse: 5116.000 MB/sec
raid5: using function: generic_sse (5116.000 MB/sec)
md: multipath personality registered as nr 7
md: md driver 0.90.2 MAX_MD_DEVS=256, MD_SB_DISKS=27
md: bitmap version 3.38
Advanced Linux Sound Architecture Driver Version 1.0.9rc2 (Thu Mar 24
10:33:39 2005 UTC).
ACPI: PCI Interrupt 0000:00:1b.0[A] -> GSI 16 (level, low) -> IRQ 169
PCI: Setting latency timer of device 0000:00:1b.0 to 64
ALSA device list:
#0: HDA Intel at 0xd2cf4000 irq 169
NET: Registered protocol family 2
IP: routing cache hash table of 4096 buckets, 64Kbytes
TCP established hash table entries: 262144 (order: 10, 4194304 bytes)
TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
TCP: Hash tables configured (established 262144 bind 65536)
ip_conntrack version 2.1 (4094 buckets, 32752 max) - 296 bytes per conntrack
ip_tables: (C) 2000-2002 Netfilter core team
ipt_recent v0.3.1: Stephen Frost <sfrost@snowman.net>.
http://snowman.net/projects/ipt_recent/
arp_tables: (C) 2002 David S. Miller
NET: Registered protocol family 1
NET: Registered protocol family 17
Testing NMI watchdog ... OK.
ACPI wakeup devices:
P0P1 P0P3 P0P4 P0P5 P0P6 P0P7 USB1 USB2 USB3 USB4 EUSB MC97
ACPI: (supports S0 S1 S3 S4 S5)
md: Autodetecting RAID arrays.
usb 3-1: new low speed USB device using uhci_hcd and address 2
md: autorun ...
md: considering sdd5 ...
md: adding sdd5 ...
md: sdd1 has different UUID to sdd5
md: sdc6 has different UUID to sdd5
md: sdc5 has different UUID to sdd5
md: adding sdb5 ...
md: sdb1 has different UUID to sdd5
md: sda6 has different UUID to sdd5
md: sda5 has different UUID to sdd5
md: created md3
md: bind<sdb5>
md: bind<sdd5>
md: running: <sdd5><sdb5>
raid1: raid set md3 active with 2 out of 2 mirrors
md: considering sdd1 ...
md: adding sdd1 ...
md: adding sdc6 ...
md: sdc5 has different UUID to sdd1
md: adding sdb1 ...
md: adding sda6 ...
md: sda5 has different UUID to sdd1
md: created md1
md: bind<sda6>
md: bind<sdb1>
md: bind<sdc6>
md: bind<sdd1>
md: running: <sdd1><sdc6><sdb1><sda6>
md1: setting max_sectors to 128, segment boundary to 32767
raid0: looking at sdd1
raid0: comparing sdd1(7325504) with sdd1(7325504)
raid0: END
raid0: ==> UNIQUE
raid0: 1 zones
raid0: looking at sdc6
raid0: comparing sdc6(7325504) with sdd1(7325504)
raid0: EQUAL
raid0: looking at sdb1
raid0: comparing sdb1(7325504) with sdd1(7325504)
raid0: EQUAL
raid0: looking at sda6
raid0: comparing sda6(7325504) with sdd1(7325504)
raid0: EQUAL
raid0: FINAL 1 zones
raid0: done.
raid0 : md_size is 29302016 blocks.
raid0 : conf->hash_spacing is 29302016 blocks.
raid0 : nb_zone is 1.
raid0 : Allocating 8 bytes for hash.
md: considering sdc5 ...
md: adding sdc5 ...
md: adding sda5 ...
md: created md0
md: bind<sda5>
md: bind<sdc5>
md: running: <sdc5><sda5>
md0: setting max_sectors to 128, segment boundary to 32767
raid0: looking at sdc5
raid0: comparing sdc5(30001280) with sdc5(30001280)
raid0: END
raid0: ==> UNIQUE
raid0: 1 zones
raid0: looking at sda5
raid0: comparing sda5(30001280) with sdc5(30001280)
raid0: EQUAL
raid0: FINAL 1 zones
raid0: done.
raid0 : md_size is 60002560 blocks.
raid0 : conf->hash_spacing is 60002560 blocks.
raid0 : nb_zone is 1.
raid0 : Allocating 8 bytes for hash.
md: ... autorun DONE.
UDF-fs: No partition found (1)
XFS mounting filesystem md1
ACPI: No ACPI bus support for 3-1
Ending clean XFS mount for filesystem: md1
VFS: Mounted root (xfs filesystem) readonly.
Freeing unused kernel memory: 212k freed
input: USB HID v1.10 Keyboard [Logitech HID compliant keyboard] on
usb-0000:00:1d.1-1
ACPI: No ACPI bus support for 3-1:1.0
input: USB HID v1.10 Device [Logitech HID compliant keyboard] on
usb-0000:00:1d.1-1
ACPI: No ACPI bus support for 3-1:1.1
usb 3-2: new low speed USB device using uhci_hcd and address 3
ACPI: No ACPI bus support for 3-2
input: USB HID v1.10 Mouse [Logitech USB-PS/2 Optical Mouse] on
usb-0000:00:1d.1-2
ACPI: No ACPI bus support for 3-2:1.0
2.6.12-rc2 vanilla kernel:
BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
BIOS-e820: 00000000000e4000 - 0000000000100000 (reserved)
BIOS-e820: 0000000000100000 - 000000003ffb0000 (usable)
BIOS-e820: 000000003ffb0000 - 000000003ffbe000 (ACPI data)
BIOS-e820: 000000003ffbe000 - 000000003fff0000 (ACPI NVS)
BIOS-e820: 000000003fff0000 - 0000000040000000 (reserved)
BIOS-e820: 00000000ffb00000 - 0000000100000000 (reserved)
ACPI: RSDP (v002 ACPIAM ) @
0x00000000000fafa0
ACPI: XSDT (v001 A M I OEMXSDT 0x02000503 MSFT 0x00000097) @
0x000000003ffb0100
ACPI: FADT (v003 A M I OEMFACP 0x02000503 MSFT 0x00000097) @
0x000000003ffb0290
ACPI: MADT (v001 A M I OEMAPIC 0x02000503 MSFT 0x00000097) @
0x000000003ffb0390
ACPI: OEMB (v001 A M I AMI_OEM 0x02000503 MSFT 0x00000097) @
0x000000003ffbe040
ACPI: MCFG (v001 A M I OEMMCFG 0x02000503 MSFT 0x00000097) @
0x000000003ffb6c40
ACPI: DSDT (v001 A0144 A0144000 0x00000000 INTL 0x02002026) @
0x0000000000000000
On node 0 totalpages: 262064
DMA zone: 4096 pages, LIFO batch:1
Normal zone: 257968 pages, LIFO batch:16
HighMem zone: 0 pages, LIFO batch:1
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
Processor #0 15:4 APIC version 16
ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
Processor #1 15:4 APIC version 16
ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ACPI: IRQ0 used by override.
ACPI: IRQ2 used by override.
ACPI: IRQ9 used by override.
Setting APIC routing to flat
Using ACPI (MADT) for SMP configuration information
Built 1 zonelists
Kernel command line: root=/dev/md1 vga=794 quiet console=tty0
Initializing CPU#0
PID hash table entries: 4096 (order: 12, 131072 bytes)
time.c: Using 1.193182 MHz PIT timer.
time.c: Detected 3527.425 MHz processor.
Console: colour dummy device 80x25
Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes)
Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes)
Memory: 1024944k/1048256k available (3249k kernel code, 22684k reserved,
1243k data, 208k init)
Calibrating delay loop... 6963.20 BogoMIPS (lpj=3481600)
Security Framework v1.0.0 initialized
Capability LSM initialized
Mount-cache hash table entries: 256
CPU: Trace cache: 12K uops, L1 D cache: 16K
CPU: L2 cache: 2048K
using mwait in idle threads.
CPU: Physical Processor ID: 0
CPU0: Thermal monitoring enabled (TM1)
Using IO APIC NMI watchdog
CPU: Trace cache: 12K uops, L1 D cache: 16K
CPU: L2 cache: 2048K
CPU: Physical Processor ID: 0
CPU0: Intel(R) Pentium(R) 4 CPU 3.20GHz stepping 03
Booting processor 1/1 rip 6000 rsp ffff81003ff17f58
Initializing CPU#1
Calibrating delay loop... 7045.12 BogoMIPS (lpj=3522560)
CPU: Trace cache: 12K uops, L1 D cache: 16K
CPU: L2 cache: 2048K
CPU: Physical Processor ID: 0
CPU1: Thermal monitoring enabled (TM1)
Intel(R) Pentium(R) 4 CPU 3.20GHz stepping 03
Total of 2 processors activated (14008.32 BogoMIPS).
activating NMI Watchdog ... done.
testing NMI watchdog ... CPU#1: NMI appears to be stuck (0)!
Using local APIC timer interrupts.
Detected 13.778 MHz APIC timer.
checking TSC synchronization across 2 CPUs: passed.
time.c: Using PIT/TSC based timekeeping.
Brought up 2 CPUs
CPU0 attaching sched-domain:
domain 0: span 3
groups: 1 2
domain 1: span 3
groups: 3
CPU1 attaching sched-domain:
domain 0: span 3
groups: 2 1
domain 1: span 3
groups: 3
NET: Registered protocol family 16
PCI: Using configuration type 1
PCI: Using MMCONFIG at e0000000
mtrr: v2.0 (20020519)
ACPI: Subsystem revision 20050309
ACPI: Interpreter enabled
ACPI: Using IOAPIC for interrupt routing
ACPI: PCI Root Bridge [PCI0] (0000:00)
PCI: Probing PCI hardware (bus 00)
PCI: Ignoring BAR0-3 of IDE controller 0000:00:1f.1
Boot video device is 0000:04:00.0
PCI: Transparent bridge - 0000:00:1e.0
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P1._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P3._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P4._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P5._PRT]
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 *10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 *7 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 *5 6 7 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKD] (IRQs *3 4 5 6 7 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 11 12 14 15) *0,
disabled.
ACPI: PCI Interrupt Link [LNKF] (IRQs 3 *4 5 6 7 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 10 11 12 14 15) *0,
disabled.
ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 10 *11 12 14 15)
Linux Plug and Play Support v0.97 (c) Adam Belay
pnp: PnP ACPI init
pnp: PnP ACPI: found 12 devices
SCSI subsystem initialized
usbcore: registered new driver usbfs
usbcore: registered new driver hub
PCI: Using ACPI for IRQ routing
PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a
report
pnp: 00:06: ioport range 0x290-0x297 has been reserved
IA32 emulation $Id: sys_ia32.c,v 1.32 2002/03/24 13:02:28 ak Exp $
inotify device minor=63
SGI XFS with large block/inode numbers, no debug enabled
Initializing Cryptographic API
ACPI: PCI Interrupt 0000:00:01.0[A] -> GSI 16 (level, low) -> IRQ 169
PCI: Setting latency timer of device 0000:00:01.0 to 64
assign_interrupt_mode Found MSI capability
Allocate Port Service[pcie00]
Allocate Port Service[pcie03]
ACPI: PCI Interrupt 0000:00:1c.0[A] -> GSI 16 (level, low) -> IRQ 169
PCI: Setting latency timer of device 0000:00:1c.0 to 64
assign_interrupt_mode Found MSI capability
Allocate Port Service[pcie00]
Allocate Port Service[pcie02]
Allocate Port Service[pcie03]
ACPI: PCI Interrupt 0000:00:1c.1[B] -> GSI 17 (level, low) -> IRQ 201
PCI: Setting latency timer of device 0000:00:1c.1 to 64
assign_interrupt_mode Found MSI capability
Allocate Port Service[pcie00]
Allocate Port Service[pcie02]
Allocate Port Service[pcie03]
vesafb: framebuffer at 0xd8000000, mapped to 0xffffc20010100000, using
5120k, total 131072k
vesafb: mode is 1280x1024x16, linelength=2560, pages=1
vesafb: scrolling: redraw
vesafb: Truecolor: size=0:5:6:5, shift=0:11:5:0
Console: switching to colour frame buffer device 160x64
fb0: VESA VGA frame buffer device
fb1: Virtual frame buffer device, using 1024K of video memory
ACPI: Processor [CPU1] (supports 8 throttling states)
Real Time Clock Driver v1.12
io scheduler noop registered
io scheduler cfq registered
Floppy drive(s): fd0 is 1.44M
FDC 0 is a post-1991 82077
RAMDISK driver initialized: 4 RAM disks of 4096K size 1024 blocksize
loop: loaded (max 8 devices)
ub: sizeof ub_scsi_cmd 88 ub_dev 2680
usbcore: registered new driver ub
ACPI: PCI Interrupt 0000:02:00.0[A] -> GSI 17 (level, low) -> IRQ 201
sk98lin: Network Device Driver v8.15.1.3
(C)Copyright 1999-2005 Marvell(R).
ACPI: PCI Interrupt 0000:02:00.0[A] -> GSI 17 (level, low) -> IRQ 201
PCI: Setting latency timer of device 0000:02:00.0 to 64
eth0: Marvell Yukon 88E8053 Gigabit Ethernet Controller
PrefPort:A RlmtMode:Check Link State
netconsole: not configured, aborting
Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
ICH6: IDE controller at PCI slot 0000:00:1f.1
ACPI: PCI Interrupt 0000:00:1f.1[A] -> GSI 18 (level, low) -> IRQ 217
ICH6: chipset revision 4
ICH6: not 100% native mode: will probe irqs later
ide0: BM-DMA at 0xffa0-0xffa7, BIOS settings: hda:DMA, hdb:pio
ide1: BM-DMA at 0xffa8-0xffaf, BIOS settings: hdc:pio, hdd:pio
Probing IDE interface ide0...
hda: PLEXTOR DVDR PX-716A, ATAPI CD/DVD-ROM drive
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
Probing IDE interface ide1...
hda: ATAPI 40X DVD-ROM DVD-R CD-R/RW drive, 8192kB Cache, UDMA(66)
Uniform CD-ROM driver Revision: 3.20
libata version 1.10 loaded.
ata_piix version 1.03
ACPI: PCI Interrupt 0000:00:1f.2[B] -> GSI 19 (level, low) -> IRQ 225
PCI: Setting latency timer of device 0000:00:1f.2 to 64
ata1: SATA max UDMA/133 cmd 0xAC00 ctl 0xA882 bmdma 0xA400 irq 225
ata2: SATA max UDMA/133 cmd 0xA800 ctl 0xA482 bmdma 0xA408 irq 225
ata1: dev 0 cfg 49:2f00 82:346b 83:7f01 84:4003 85:3c69 86:3e01 87:4003
88:20ff
ata1: dev 0 ATA, max UDMA7, 234493056 sectors: lba48
ata1: dev 1 cfg 49:2f00 82:346b 83:7f01 84:4003 85:3c69 86:3e01 87:4003
88:20ff
ata1: dev 1 ATA, max UDMA7, 312581808 sectors: lba48
ata1: dev 0 configured for UDMA/133
ata1: dev 1 configured for UDMA/133
scsi0 : ata_piix
ata2: dev 0 cfg 49:2f00 82:346b 83:7f01 84:4003 85:3c69 86:3e01 87:4003
88:20ff
ata2: dev 0 ATA, max UDMA7, 234493056 sectors: lba48
ata2: dev 1 cfg 49:2f00 82:346b 83:7f01 84:4003 85:3c69 86:3e01 87:4003
88:20ff
ata2: dev 1 ATA, max UDMA7, 312581808 sectors: lba48
ata2: dev 0 configured for UDMA/133
ata2: dev 1 configured for UDMA/133
scsi1 : ata_piix
Vendor: ATA Model: SAMSUNG SP1213C Rev: SV10
Type: Direct-Access ANSI SCSI revision: 05
Vendor: ATA Model: SAMSUNG SP1614C Rev: SW10
Type: Direct-Access ANSI SCSI revision: 05
Vendor: ATA Model: SAMSUNG SP1213C Rev: SV10
Type: Direct-Access ANSI SCSI revision: 05
Vendor: ATA Model: SAMSUNG SP1614C Rev: SW10
Type: Direct-Access ANSI SCSI revision: 05
SCSI device sda: 234493056 512-byte hdwr sectors (120060 MB)
SCSI device sda: drive cache: write back
SCSI device sda: 234493056 512-byte hdwr sectors (120060 MB)
SCSI device sda: drive cache: write back
sda: sda1 sda2 < sda5 sda6 sda7 >
Attached scsi disk sda at scsi0, channel 0, id 0, lun 0
SCSI device sdb: 312581808 512-byte hdwr sectors (160042 MB)
SCSI device sdb: drive cache: write back
SCSI device sdb: 312581808 512-byte hdwr sectors (160042 MB)
SCSI device sdb: drive cache: write back
sdb: sdb1 sdb2 < sdb5 >
Attached scsi disk sdb at scsi0, channel 0, id 1, lun 0
SCSI device sdc: 234493056 512-byte hdwr sectors (120060 MB)
SCSI device sdc: drive cache: write back
SCSI device sdc: 234493056 512-byte hdwr sectors (120060 MB)
SCSI device sdc: drive cache: write back
sdc: sdc1 sdc2 < sdc5 sdc6 >
Attached scsi disk sdc at scsi1, channel 0, id 0, lun 0
SCSI device sdd: 312581808 512-byte hdwr sectors (160042 MB)
SCSI device sdd: drive cache: write back
SCSI device sdd: 312581808 512-byte hdwr sectors (160042 MB)
SCSI device sdd: drive cache: write back
sdd: sdd1 sdd2 < sdd5 >
Attached scsi disk sdd at scsi1, channel 0, id 1, lun 0
Attached scsi generic sg0 at scsi0, channel 0, id 0, lun 0, type 0
Attached scsi generic sg1 at scsi0, channel 0, id 1, lun 0, type 0
Attached scsi generic sg2 at scsi1, channel 0, id 0, lun 0, type 0
Attached scsi generic sg3 at scsi1, channel 0, id 1, lun 0, type 0
usbmon: debugs is not available
ACPI: PCI Interrupt 0000:00:1d.7[A] -> GSI 23 (level, low) -> IRQ 233
PCI: Setting latency timer of device 0000:00:1d.7 to 64
ehci_hcd 0000:00:1d.7: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6
Family) USB2 EHCI Controller
ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1
ehci_hcd 0000:00:1d.7: irq 233, io mem 0xd2cff800
PCI: cache line size of 128 is not supported by device 0000:00:1d.7
ehci_hcd 0000:00:1d.7: USB 2.0 initialized, EHCI 1.00, driver 10 Dec 2004
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 8 ports detected
USB Universal Host Controller Interface driver v2.2
ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 23 (level, low) -> IRQ 233
PCI: Setting latency timer of device 0000:00:1d.0 to 64
uhci_hcd 0000:00:1d.0: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6
Family) USB UHCI #1
uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
uhci_hcd 0000:00:1d.0: irq 233, io base 0x00009880
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 2 ports detected
ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 19 (level, low) -> IRQ 225
PCI: Setting latency timer of device 0000:00:1d.1 to 64
uhci_hcd 0000:00:1d.1: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6
Family) USB UHCI #2
uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3
uhci_hcd 0000:00:1d.1: irq 225, io base 0x00009c00
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 2 ports detected
ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 217
PCI: Setting latency timer of device 0000:00:1d.2 to 64
uhci_hcd 0000:00:1d.2: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6
Family) USB UHCI #3
uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4
uhci_hcd 0000:00:1d.2: irq 217, io base 0x0000a000
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 2 ports detected
ACPI: PCI Interrupt 0000:00:1d.3[D] -> GSI 16 (level, low) -> IRQ 169
PCI: Setting latency timer of device 0000:00:1d.3 to 64
uhci_hcd 0000:00:1d.3: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6
Family) USB UHCI #4
uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 5
uhci_hcd 0000:00:1d.3: irq 169, io base 0x0000a080
hub 5-0:1.0: USB hub found
hub 5-0:1.0: 2 ports detected
Initializing USB Mass Storage driver...
usbcore: registered new driver usb-storage
USB Mass Storage support registered.
usbcore: registered new driver usbhid
drivers/usb/input/hid-core.c: v2.01:USB HID core driver
mice: PS/2 mouse device common for all mice
md: linear personality registered as nr 1
md: raid0 personality registered as nr 2
md: raid1 personality registered as nr 3
md: raid5 personality registered as nr 4
raid5: automatically using best checksumming function: generic_sse
generic_sse: 5108.000 MB/sec
raid5: using function: generic_sse (5108.000 MB/sec)
md: multipath personality registered as nr 7
md: md driver 0.90.1 MAX_MD_DEVS=256, MD_SB_DISKS=27
Advanced Linux Sound Architecture Driver Version 1.0.9rc2 (Thu Mar 24
10:33:39 2005 UTC).
ACPI: PCI Interrupt 0000:00:1b.0[A] -> GSI 16 (level, low) -> IRQ 169
PCI: Setting latency timer of device 0000:00:1b.0 to 64
ALSA device list:
#0: HDA Intel at 0xd2cf4000 irq 169
NET: Registered protocol family 2
IP: routing cache hash table of 4096 buckets, 64Kbytes
TCP established hash table entries: 262144 (order: 10, 4194304 bytes)
TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
TCP: Hash tables configured (established 262144 bind 65536)
ip_conntrack version 2.1 (4094 buckets, 32752 max) - 304 bytes per conntrack
ip_tables: (C) 2000-2002 Netfilter core team
ipt_recent v0.3.1: Stephen Frost <sfrost@snowman.net>.
http://snowman.net/projects/ipt_recent/
arp_tables: (C) 2002 David S. Miller
NET: Registered protocol family 1
NET: Registered protocol family 17
ACPI wakeup devices:
P0P1 P0P3 P0P4 P0P5 P0P6 P0P7 USB1 USB2 USB3 USB4 EUSB MC97
ACPI: (supports S0 S1 S3 S4 S5)
md: Autodetecting RAID arrays.
usb 3-1: new low speed USB device using uhci_hcd and address 2
md: autorun ...
md: considering sdd5 ...
md: adding sdd5 ...
md: sdd1 has different UUID to sdd5
md: sdc6 has different UUID to sdd5
md: sdc5 has different UUID to sdd5
md: adding sdb5 ...
md: sdb1 has different UUID to sdd5
md: sda6 has different UUID to sdd5
md: sda5 has different UUID to sdd5
md: created md3
md: bind<sdb5>
md: bind<sdd5>
md: running: <sdd5><sdb5>
raid1: raid set md3 active with 2 out of 2 mirrors
md: considering sdd1 ...
md: adding sdd1 ...
md: adding sdc6 ...
md: sdc5 has different UUID to sdd1
md: adding sdb1 ...
md: adding sda6 ...
md: sda5 has different UUID to sdd1
md: created md1
md: bind<sda6>
md: bind<sdb1>
md: bind<sdc6>
md: bind<sdd1>
md: running: <sdd1><sdc6><sdb1><sda6>
md1: setting max_sectors to 128, segment boundary to 32767
raid0: looking at sdd1
raid0: comparing sdd1(7325504) with sdd1(7325504)
raid0: END
raid0: ==> UNIQUE
raid0: 1 zones
raid0: looking at sdc6
raid0: comparing sdc6(7325504) with sdd1(7325504)
raid0: EQUAL
raid0: looking at sdb1
raid0: comparing sdb1(7325504) with sdd1(7325504)
raid0: EQUAL
raid0: looking at sda6
raid0: comparing sda6(7325504) with sdd1(7325504)
raid0: EQUAL
raid0: FINAL 1 zones
raid0: done.
raid0 : md_size is 29302016 blocks.
raid0 : conf->hash_spacing is 29302016 blocks.
raid0 : nb_zone is 1.
raid0 : Allocating 8 bytes for hash.
md: considering sdc5 ...
md: adding sdc5 ...
md: adding sda5 ...
md: created md0
md: bind<sda5>
md: bind<sdc5>
md: running: <sdc5><sda5>
md0: setting max_sectors to 128, segment boundary to 32767
raid0: looking at sdc5
raid0: comparing sdc5(30001280) with sdc5(30001280)
raid0: END
raid0: ==> UNIQUE
raid0: 1 zones
raid0: looking at sda5
raid0: comparing sda5(30001280) with sdc5(30001280)
raid0: EQUAL
raid0: FINAL 1 zones
raid0: done.
raid0 : md_size is 60002560 blocks.
raid0 : conf->hash_spacing is 60002560 blocks.
raid0 : nb_zone is 1.
raid0 : Allocating 8 bytes for hash.
md: ... autorun DONE.
UDF-fs: No partition found (1)
XFS mounting filesystem md1
Ending clean XFS mount for filesystem: md1
VFS: Mounted root (xfs filesystem) readonly.
Freeing unused kernel memory: 208k freed
input: USB HID v1.10 Keyboard [Logitech HID compliant keyboard] on
usb-0000:00:1d.1-1
input: USB HID v1.10 Device [Logitech HID compliant keyboard] on
usb-0000:00:1d.1-1
usb 3-2: new low speed USB device using uhci_hcd and address 3
input: USB HID v1.10 Mouse [Logitech USB-PS/2 Optical Mouse] on
usb-0000:00:1d.1-2
nvidia: module license 'NVIDIA' taints kernel.
ACPI: PCI Interrupt 0000:04:00.0[A] -> GSI 16 (level, low) -> IRQ 169
PCI: Setting latency timer of device 0000:04:00.0 to 64
^ permalink raw reply [flat|nested] 27+ messages in thread
* Re: 2.6.12-rc2-mm2
2005-04-08 10:08 2.6.12-rc2-mm2 Andrew Morton
2005-04-08 11:46 ` 2.6.12-rc2-mm2 Rafael J. Wysocki
@ 2005-04-08 12:25 ` Indrek Kruusa
2005-04-08 14:11 ` 2.6.12-rc2-mm2 Jan Dittmer
` (7 subsequent siblings)
9 siblings, 0 replies; 27+ messages in thread
From: Indrek Kruusa @ 2005-04-08 12:25 UTC (permalink / raw)
To: Andrew Morton; +Cc: linux-kernel
Andrew Morton wrote:
>ftp://ftp.kernel.org/pub/linux/kernel/people/akpm/patches/2.6/2.6.12-rc2/2.6.12-rc2-mm2/
>
>
Wow... it responds despite the load average of 83.63 :)
http://www.tuleriit.ee/progs/img/pic1.png
http://www.tuleriit.ee/progs/img/pic2.png
http://www.tuleriit.ee/progs/img/pic3.png
dmesg is not clean though:
TCP: time wait bucket table overflow
TCP: time wait bucket table overflow
TCP: time wait bucket table overflow
printk: 392 messages suppressed.
TCP: time wait bucket table overflow
printk: 290 messages suppressed.
TCP: time wait bucket table overflow
TCP: time wait bucket table overflow
TCP: time wait bucket table overflow
TCP: time wait bucket table overflow
TCP: time wait bucket table overflow
TCP: time wait bucket table overflow
TCP: time wait bucket table overflow
TCP: time wait bucket table overflow
TCP: time wait bucket table overflow
TCP: time wait bucket table overflow
printk: 295 messages suppressed.
TCP: time wait bucket table overflow
What I did:
- "bombing" httpd with JMeter (from another computer)
- copying files from USB memory device to harddisk
- copying file with scp
Indrek
^ permalink raw reply [flat|nested] 27+ messages in thread
* Re: 2.6.12-rc2-mm2
2005-04-08 17:28 ` 2.6.12-rc2-mm2 Alexey Dobriyan
@ 2005-04-08 13:52 ` Martin Waitz
0 siblings, 0 replies; 27+ messages in thread
From: Martin Waitz @ 2005-04-08 13:52 UTC (permalink / raw)
To: Alexey Dobriyan; +Cc: linux-kernel, Andrew Morton, Sam Ravnborg
[-- Attachment #1: Type: text/plain, Size: 399 bytes --]
hoi :)
On Fri, Apr 08, 2005 at 05:28:25PM +0000, Alexey Dobriyan wrote:
> htmldocs (haven't look at pdf, etc...) became K&R'ish.
> Also, Documentation/Docbook/*.html uses book1.html, but there are only
> Documentation/Docbook/*/index.html
> Functions are not hyperlinked from index.html. IIRC, they were in jadetex
> days.
I'll take a look at the stylesheetes
--
Martin Waitz
[-- Attachment #2: Digital signature --]
[-- Type: application/pgp-signature, Size: 189 bytes --]
^ permalink raw reply [flat|nested] 27+ messages in thread
* Re: 2.6.12-rc2-mm2
2005-04-08 10:08 2.6.12-rc2-mm2 Andrew Morton
2005-04-08 11:46 ` 2.6.12-rc2-mm2 Rafael J. Wysocki
2005-04-08 12:25 ` 2.6.12-rc2-mm2 Indrek Kruusa
@ 2005-04-08 14:11 ` Jan Dittmer
2005-04-08 15:23 ` 2.6.12-rc2-mm2 Paulo Marques
2005-04-08 14:14 ` 2.6.12-rc2-mm2 Jan Dittmer
` (6 subsequent siblings)
9 siblings, 1 reply; 27+ messages in thread
From: Jan Dittmer @ 2005-04-08 14:11 UTC (permalink / raw)
To: Andrew Morton; +Cc: linux-kernel, pmarques
Andrew Morton wrote:
> create-a-kstrdup-library-function.patch
> create a kstrdup library function
>
> create-a-kstrdup-library-function-fixes.patch
> create-a-kstrdup-library-function-fixes
ppc defconfig build is broken due to this
make ARCH=ppc CROSS_COMPILE=powerpc-linux- O=/usr/src/ctest/mm/out/ppc
CC arch/ppc/boot/openfirmware/dummy.o
GEN arch/ppc/boot/openfirmware/image.o
AS arch/ppc/boot/openfirmware/coffcrt0.o
CC arch/ppc/boot/openfirmware/start.o
AS arch/ppc/boot/openfirmware/misc.o
CC arch/ppc/boot/openfirmware/common.o
CC arch/ppc/boot/openfirmware/coffmain.o
COFF arch/ppc/boot/openfirmware/coffboot
lib/lib.a(string.o)(.text+0x5cc): In function `kstrdup':
: undefined reference to `__kmalloc'
COFF arch/ppc/boot/images/vmlinux.coff
powerpc-linux-objcopy: 'arch/ppc/boot/openfirmware/coffboot': No such file
make[3]: *** [arch/ppc/boot/images/vmlinux.coff] Error 1
make[2]: *** [openfirmware] Error 2
make[1]: *** [zImage] Error 2
make: *** [_all] Error 2
See http://l4x.org/k/?d=3218
Jan
^ permalink raw reply [flat|nested] 27+ messages in thread
* Re: 2.6.12-rc2-mm2
2005-04-08 10:08 2.6.12-rc2-mm2 Andrew Morton
` (2 preceding siblings ...)
2005-04-08 14:11 ` 2.6.12-rc2-mm2 Jan Dittmer
@ 2005-04-08 14:14 ` Jan Dittmer
[not found] ` <425691BD.9080507-wDE+IXx/zk/R7s880joybQ@public.gmane.org>
2005-04-08 15:17 ` 2.6.12-rc2-mm2 Alexander Nyberg
` (5 subsequent siblings)
9 siblings, 1 reply; 27+ messages in thread
From: Jan Dittmer @ 2005-04-08 14:14 UTC (permalink / raw)
To: Andrew Morton; +Cc: linux-kernel
Andrew Morton wrote:
> - The bk-acpi patch here causes my ia64 test box to hang during boot
> bk-ia64.patch
ia64 defconfig does not even build anymore:
CC [M] drivers/char/agp/hp-agp.o
In file included from /usr/src/ctest/mm/kernel/drivers/char/agp/hp-agp.c:18:
include2/asm/acpi-ext.h:15: error: parse error before "hp_acpi_csr_space"
include2/asm/acpi-ext.h:15: error: parse error before "u64"
include2/asm/acpi-ext.h:15: warning: type defaults to `int' in declaration of `hp_acpi_csr_space'
include2/asm/acpi-ext.h:15: warning: function declaration isn't a prototype
include2/asm/acpi-ext.h:15: warning: data definition has no type or storage class
/usr/src/ctest/mm/kernel/drivers/char/agp/hp-agp.c: In function `hp_zx1_configure':
/usr/src/ctest/mm/kernel/drivers/char/agp/hp-agp.c:255: warning: large integer implicitly truncated to unsigned type
/usr/src/ctest/mm/kernel/drivers/char/agp/hp-agp.c: At top level:
/usr/src/ctest/mm/kernel/drivers/char/agp/hp-agp.c:477: warning: type defaults to `int' in declaration of `acpi_status'
/usr/src/ctest/mm/kernel/drivers/char/agp/hp-agp.c:477: error: parse error before "zx1_gart_probe"
/usr/src/ctest/mm/kernel/drivers/char/agp/hp-agp.c:480: warning: type defaults to `int' in declaration of `status'
/usr/src/ctest/mm/kernel/drivers/char/agp/hp-agp.c:480: warning: data definition has no type or storage class
/usr/src/ctest/mm/kernel/drivers/char/agp/hp-agp.c:486: warning: type defaults to `int' in declaration of `status'
/usr/src/ctest/mm/kernel/drivers/char/agp/hp-agp.c:486: error: `obj' undeclared here (not in a function)
/usr/src/ctest/mm/kernel/drivers/char/agp/hp-agp.c:486: error: initializer element is not constant
/usr/src/ctest/mm/kernel/drivers/char/agp/hp-agp.c:486: warning: data definition has no type or storage class
/usr/src/ctest/mm/kernel/drivers/char/agp/hp-agp.c:487: error: parse error before "if"
/usr/src/ctest/mm/kernel/drivers/char/agp/hp-agp.c:491: warning: type defaults to `int' in declaration of `handle'
/usr/src/ctest/mm/kernel/drivers/char/agp/hp-agp.c:491: error: `obj' undeclared here (not in a function)
/usr/src/ctest/mm/kernel/drivers/char/agp/hp-agp.c:491: warning: data definition has no type or storage class
/usr/src/ctest/mm/kernel/drivers/char/agp/hp-agp.c:492: error: parse error before "do"
/usr/src/ctest/mm/kernel/drivers/char/agp/hp-agp.c:494: warning: type defaults to `int' in declaration of `status'
/usr/src/ctest/mm/kernel/drivers/char/agp/hp-agp.c:494: error: redefinition of `status'
/usr/src/ctest/mm/kernel/drivers/char/agp/hp-agp.c:486: error: `status' previously defined here
/usr/src/ctest/mm/kernel/drivers/char/agp/hp-agp.c:494: warning: implicit declaration of function `acpi_get_object_info'
/usr/src/ctest/mm/kernel/drivers/char/agp/hp-agp.c:494: error: initializer element is not constant
/usr/src/ctest/mm/kernel/drivers/char/agp/hp-agp.c:494: warning: data definition has no type or storage class
/usr/src/ctest/mm/kernel/drivers/char/agp/hp-agp.c:495: error: parse error before "if"
/usr/src/ctest/mm/kernel/drivers/char/agp/hp-agp.c:499: warning: type defaults to `int' in declaration of `match'
/usr/src/ctest/mm/kernel/drivers/char/agp/hp-agp.c:499: error: dereferencing pointer to incomplete type
/usr/src/ctest/mm/kernel/drivers/char/agp/hp-agp.c:499: error: initializer element is not constant
/usr/src/ctest/mm/kernel/drivers/char/agp/hp-agp.c:499: warning: data definition has no type or storage class
/usr/src/ctest/mm/kernel/drivers/char/agp/hp-agp.c:500: warning: type defaults to `int' in declaration of `ACPI_MEM_FREE'
/usr/src/ctest/mm/kernel/drivers/char/agp/hp-agp.c:500: warning: parameter names (without types) in function declaration
/usr/src/ctest/mm/kernel/drivers/char/agp/hp-agp.c:500: warning: data definition has no type or storage class
/usr/src/ctest/mm/kernel/drivers/char/agp/hp-agp.c:501: error: parse error before "if"
/usr/src/ctest/mm/kernel/drivers/char/agp/hp-agp.c:513: warning: type defaults to `int' in declaration of `status'
/usr/src/ctest/mm/kernel/drivers/char/agp/hp-agp.c:513: error: redefinition of `status'
/usr/src/ctest/mm/kernel/drivers/char/agp/hp-agp.c:494: error: `status' previously defined here
/usr/src/ctest/mm/kernel/drivers/char/agp/hp-agp.c:513: warning: implicit declaration of function `acpi_get_parent'
/usr/src/ctest/mm/kernel/drivers/char/agp/hp-agp.c:513: error: `parent' undeclared here (not in a function)
/usr/src/ctest/mm/kernel/drivers/char/agp/hp-agp.c:513: error: initializer element is not constant
/usr/src/ctest/mm/kernel/drivers/char/agp/hp-agp.c:513: warning: data definition has no type or storage class
/usr/src/ctest/mm/kernel/drivers/char/agp/hp-agp.c:514: warning: type defaults to `int' in declaration of `handle'
/usr/src/ctest/mm/kernel/drivers/char/agp/hp-agp.c:514: error: redefinition of `handle'
/usr/src/ctest/mm/kernel/drivers/char/agp/hp-agp.c:491: error: `handle' previously defined here
/usr/src/ctest/mm/kernel/drivers/char/agp/hp-agp.c:514: error: `parent' undeclared here (not in a function)
/usr/src/ctest/mm/kernel/drivers/char/agp/hp-agp.c:514: warning: data definition has no type or storage class
/usr/src/ctest/mm/kernel/drivers/char/agp/hp-agp.c:515: error: parse error before '}' token
/usr/src/ctest/mm/kernel/drivers/char/agp/hp-agp.c:520: error: parse error before string constant
/usr/src/ctest/mm/kernel/drivers/char/agp/hp-agp.c:521: warning: type defaults to `int' in declaration of `context'
/usr/src/ctest/mm/kernel/drivers/char/agp/hp-agp.c:521: warning: type defaults to `int' in declaration of `sba_hpa'
/usr/src/ctest/mm/kernel/drivers/char/agp/hp-agp.c:521: error: conflicting types for `sba_hpa'
/usr/src/ctest/mm/kernel/drivers/char/agp/hp-agp.c:483: error: previous declaration of `sba_hpa'
/usr/src/ctest/mm/kernel/drivers/char/agp/hp-agp.c:521: error: parse error before '+' token
/usr/src/ctest/mm/kernel/drivers/char/agp/hp-agp.c:523: warning: type defaults to `int' in declaration of `hp_zx1_gart_found'
/usr/src/ctest/mm/kernel/drivers/char/agp/hp-agp.c:523: error: conflicting declarations of `hp_zx1_gart_found'
/usr/src/ctest/mm/kernel/drivers/char/agp/hp-agp.c:49: error: `hp_zx1_gart_found' previously declared here
/usr/src/ctest/mm/kernel/drivers/char/agp/hp-agp.c:523: warning: data definition has no type or storage class
/usr/src/ctest/mm/kernel/drivers/char/agp/hp-agp.c:524: error: parse error before "return"
/usr/src/ctest/mm/kernel/drivers/char/agp/hp-agp.c: In function `agp_hp_init':
/usr/src/ctest/mm/kernel/drivers/char/agp/hp-agp.c:533: warning: implicit declaration of function `acpi_get_devices'
/usr/src/ctest/mm/kernel/drivers/char/agp/hp-agp.c:533: error: `zx1_gart_probe' undeclared (first use in this function)
/usr/src/ctest/mm/kernel/drivers/char/agp/hp-agp.c:533: error: (Each undeclared identifier is reported only once
/usr/src/ctest/mm/kernel/drivers/char/agp/hp-agp.c:533: error: for each function it appears in.)
/usr/src/ctest/mm/kernel/drivers/char/agp/hp-agp.c: At top level:
/usr/src/ctest/mm/kernel/drivers/char/agp/hp-agp.c:481: error: storage size of `buffer' isn't known
/usr/src/ctest/mm/kernel/drivers/char/agp/hp-agp.c:49: warning: `hp_zx1_gart_found' defined but not used
/usr/src/ctest/mm/kernel/drivers/char/agp/hp-agp.c:446: warning: `hp_zx1_setup' defined but not used
/usr/src/ctest/mm/kernel/drivers/char/agp/hp-agp.c:477: warning: `acpi_status' defined but not used
{standard input}: Assembler messages:
{standard input}:72: Error: symbol `hp_zx1_gart_found' is already defined
{standard input}:133: Error: symbol `status' is already defined
{standard input}:139: Error: symbol `status' is already defined
{standard input}:145: Error: symbol `handle' is already defined
make[4]: *** [drivers/char/agp/hp-agp.o] Error 1
make[3]: *** [drivers/char/agp] Error 2
make[2]: *** [drivers/char] Error 2
make[1]: *** [drivers] Error 2
make: *** [_all] Error 2
See http://l4x.org/k/?d=3211
Jan
^ permalink raw reply [flat|nested] 27+ messages in thread
* Re: 2.6.12-rc2-mm2
2005-04-08 10:08 2.6.12-rc2-mm2 Andrew Morton
` (3 preceding siblings ...)
2005-04-08 14:14 ` 2.6.12-rc2-mm2 Jan Dittmer
@ 2005-04-08 15:17 ` Alexander Nyberg
2005-04-08 17:28 ` 2.6.12-rc2-mm2 Alexey Dobriyan
` (4 subsequent siblings)
9 siblings, 0 replies; 27+ messages in thread
From: Alexander Nyberg @ 2005-04-08 15:17 UTC (permalink / raw)
To: Andrew Morton; +Cc: linux-kernel
fre 2005-04-08 klockan 03:08 -0700 skrev Andrew Morton:
> ftp://ftp.kernel.org/pub/linux/kernel/people/akpm/patches/2.6/2.6.12-rc2/2.6.12-rc2-mm2/
>
I got this running ./runltp -x 2, can't recall this happening before. It
bothers me a bit as it's a GFP_KERNEL allocation and there's lots of
swap available. I don't think I've learned to fully decipher these
oom-dumps fully yet (especially the active/inactive stat) but this looks
fishy to me.
Run with /proc/sys/vm/swappiness=1
After the killing /proc/meminfo reports lots of MemFree.
oom-killer: gfp_mask=0x80d2
DMA per-cpu:
cpu 0 hot: low 2, high 6, batch 1
cpu 0 cold: low 0, high 2, batch 1
cpu 1 hot: low 2, high 6, batch 1
cpu 1 cold: low 0, high 2, batch 1
Normal per-cpu:
cpu 0 hot: low 32, high 96, batch 16
cpu 0 cold: low 0, high 32, batch 16
cpu 1 hot: low 32, high 96, batch 16
cpu 1 cold: low 0, high 32, batch 16
HighMem per-cpu: empty
Free pages: 8220kB (0kB HighMem)
Active:240716 inactive:2631 dirty:0 writeback:1162 unstable:0 free:2055 slab:5340 mapped:242023 pagetables:1441
DMA free:4100kB min:60kB low:72kB high:88kB active:172kB inactive:7956kB present:16384kB pages_scanned:363 all_unreclaimable? no
lowmem_reserve[]: 0 1007 1007
Normal free:4120kB min:4028kB low:5032kB high:6040kB active:962692kB inactive:2568kB present:1032128kB pages_scanned:6421 all_unreclaimable? no
lowmem_reserve[]: 0 0 0
HighMem free:0kB min:128kB low:160kB high:192kB active:0kB inactive:0kB present:0kB pages_scanned:0 all_unreclaimable? no
lowmem_reserve[]: 0 0 0
DMA: 1*4kB 2*8kB 1*16kB 1*32kB 1*64kB 1*128kB 1*256kB 1*512kB 1*1024kB 1*2048kB 0*4096kB = 4100kB
Normal: 32*4kB 1*8kB 1*16kB 2*32kB 1*64kB 0*128kB 1*256kB 1*512kB 1*1024kB 1*2048kB 0*4096kB = 4120kB
HighMem: empty
Swap cache: add 921, delete 257, find 0/0, race 0+0
Free swap = 4880036kB
Total swap = 4883720kB
Out of Memory: Killed process 2327 (firefox-bin).
oom-killer: gfp_mask=0xd0
DMA per-cpu:
cpu 0 hot: low 2, high 6, batch 1
cpu 0 cold: low 0, high 2, batch 1
cpu 1 hot: low 2, high 6, batch 1
cpu 1 cold: low 0, high 2, batch 1
Normal per-cpu:
cpu 0 hot: low 32, high 96, batch 16
cpu 0 cold: low 0, high 32, batch 16
cpu 1 hot: low 32, high 96, batch 16
cpu 1 cold: low 0, high 32, batch 16
HighMem per-cpu: empty
Free pages: 8112kB (0kB HighMem)
Active:224482 inactive:19068 dirty:0 writeback:285 unstable:0 free:2028 slab:5089 mapped:243275 pagetables:1407
DMA free:4088kB min:60kB low:72kB high:88kB active:6432kB inactive:1744kB present:16384kB pages_scanned:10438 all_unreclaimable? yes
lowmem_reserve[]: 0 1007 1007
Normal free:4024kB min:4028kB low:5032kB high:6040kB active:891496kB inactive:74528kB present:1032128kB pages_scanned:686 all_unreclaimable? no
lowmem_reserve[]: 0 0 0
HighMem free:0kB min:128kB low:160kB high:192kB active:0kB inactive:0kB present:0kB pages_scanned:0 all_unreclaimable? no
lowmem_reserve[]: 0 0 0
DMA: 0*4kB 1*8kB 1*16kB 1*32kB 1*64kB 1*128kB 1*256kB 1*512kB 1*1024kB 1*2048kB 0*4096kB = 4088kB
Normal: 6*4kB 4*8kB 0*16kB 4*32kB 2*64kB 1*128kB 0*256kB 1*512kB 1*1024kB 1*2048kB 0*4096kB = 4024kB
HighMem: empty
Swap cache: add 2900, delete 2557, find 0/0, race 0+0
Free swap = 4872120kB
Total swap = 4883720kB
Out of Memory: Killed process 2305 (evolution).
oom-killer: gfp_mask=0xd0
DMA per-cpu:
cpu 0 hot: low 2, high 6, batch 1
cpu 0 cold: low 0, high 2, batch 1
cpu 1 hot: low 2, high 6, batch 1
cpu 1 cold: low 0, high 2, batch 1
Normal per-cpu:
cpu 0 hot: low 32, high 96, batch 16
cpu 0 cold: low 0, high 32, batch 16
cpu 1 hot: low 32, high 96, batch 16
cpu 1 cold: low 0, high 32, batch 16
HighMem per-cpu: empty
Free pages: 8096kB (0kB HighMem)
Active:229514 inactive:14617 dirty:0 writeback:0 unstable:0 free:2024 slab:4233 mapped:244389 pagetables:1568
DMA free:4088kB min:60kB low:72kB high:88kB active:8228kB inactive:0kB present:16384kB pages_scanned:9771 all_unreclaimable? yes
lowmem_reserve[]: 0 1007 1007
Normal free:4008kB min:4028kB low:5032kB high:6040kB active:909060kB inactive:59364kB present:1032128kB pages_scanned:1623064 all_unreclaimable? yes
lowmem_reserve[]: 0 0 0
HighMem free:0kB min:128kB low:160kB high:192kB active:0kB inactive:0kB present:0kB pages_scanned:0 all_unreclaimable? no
lowmem_reserve[]: 0 0 0
DMA: 0*4kB 1*8kB 1*16kB 1*32kB 1*64kB 1*128kB 1*256kB 1*512kB 1*1024kB 1*2048kB 0*4096kB = 4088kB
Normal: 0*4kB 1*8kB 2*16kB 0*32kB 4*64kB 1*128kB 0*256kB 1*512kB 1*1024kB 1*2048kB 0*4096kB = 4008kB
HighMem: empty
Swap cache: add 125467, delete 125298, find 70/196, race 0+0
Free swap = 4383340kB
Total swap = 4883720kB
Out of Memory: Killed process 2330 (gnome-pty-helpe).
oom-killer: gfp_mask=0xd0
DMA per-cpu:
cpu 0 hot: low 2, high 6, batch 1
cpu 0 cold: low 0, high 2, batch 1
cpu 1 hot: low 2, high 6, batch 1
cpu 1 cold: low 0, high 2, batch 1
Normal per-cpu:
cpu 0 hot: low 32, high 96, batch 16
cpu 0 cold: low 0, high 32, batch 16
cpu 1 hot: low 32, high 96, batch 16
cpu 1 cold: low 0, high 32, batch 16
HighMem per-cpu: empty
Free pages: 8224kB (0kB HighMem)
Active:88815 inactive:155432 dirty:0 writeback:244 unstable:0 free:2056 slab:4233 mapped:243992 pagetables:1561
DMA free:4088kB min:60kB low:72kB high:88kB active:8100kB inactive:128kB present:16384kB pages_scanned:9805 all_unreclaimable? yes
lowmem_reserve[]: 0 1007 1007
Normal free:4072kB min:4028kB low:5032kB high:6040kB active:347160kB inactive:621600kB present:1032128kB pages_scanned:63219 all_unreclaimable? no
lowmem_reserve[]: 0 0 0
HighMem free:0kB min:128kB low:160kB high:192kB active:0kB inactive:0kB present:0kB pages_scanned:0 all_unreclaimable? no
lowmem_reserve[]: 0 0 0
DMA: 0*4kB 1*8kB 1*16kB 1*32kB 1*64kB 1*128kB 1*256kB 1*512kB 1*1024kB 1*2048kB 0*4096kB = 4088kB
Normal: 0*4kB 1*8kB 0*16kB 1*32kB 5*64kB 1*128kB 0*256kB 1*512kB 1*1024kB 1*2048kB 0*4096kB = 4072kB
HighMem: empty
Swap cache: add 126311, delete 125768, find 70/198, race 0+0
Free swap = 4380112kB
Total swap = 4883720kB
Out of Memory: Killed process 2331 (bash).
oom-killer: gfp_mask=0xd0
DMA per-cpu:
cpu 0 hot: low 2, high 6, batch 1
cpu 0 cold: low 0, high 2, batch 1
cpu 1 hot: low 2, high 6, batch 1
cpu 1 cold: low 0, high 2, batch 1
Normal per-cpu:
cpu 0 hot: low 32, high 96, batch 16
cpu 0 cold: low 0, high 32, batch 16
cpu 1 hot: low 32, high 96, batch 16
cpu 1 cold: low 0, high 32, batch 16
HighMem per-cpu: empty
Free pages: 8192kB (0kB HighMem)
Active:200715 inactive:43662 dirty:0 writeback:0 unstable:0 free:2048 slab:4027 mapped:244172 pagetables:1818
DMA free:4088kB min:60kB low:72kB high:88kB active:8228kB inactive:0kB present:16384kB pages_scanned:10298 all_unreclaimable? yes
lowmem_reserve[]: 0 1007 1007
Normal free:4040kB min:4028kB low:5032kB high:6040kB active:794632kB inactive:174648kB present:1032128kB pages_scanned:1236 all_unreclaimable? no
lowmem_reserve[]: 0 0 0
HighMem free:0kB min:128kB low:160kB high:192kB active:0kB inactive:0kB present:0kB pages_scanned:0 all_unreclaimable? no
lowmem_reserve[]: 0 0 0
DMA: 0*4kB 1*8kB 1*16kB 1*32kB 1*64kB 1*128kB 1*256kB 1*512kB 1*1024kB 1*2048kB 0*4096kB = 4088kB
Normal: 0*4kB 5*8kB 2*16kB 0*32kB 4*64kB 1*128kB 0*256kB 1*512kB 1*1024kB 1*2048kB 0*4096kB = 4040kB
HighMem: empty
Swap cache: add 283299, delete 280461, find 1810/2841, race 0+1
Free swap = 3771728kB
Total swap = 4883720kB
Out of Memory: Killed process 2227 (XFree86).
^ permalink raw reply [flat|nested] 27+ messages in thread
* Re: 2.6.12-rc2-mm2
2005-04-08 14:11 ` 2.6.12-rc2-mm2 Jan Dittmer
@ 2005-04-08 15:23 ` Paulo Marques
0 siblings, 0 replies; 27+ messages in thread
From: Paulo Marques @ 2005-04-08 15:23 UTC (permalink / raw)
To: Jan Dittmer; +Cc: Andrew Morton, linux-kernel
[-- Attachment #1: Type: text/plain, Size: 649 bytes --]
Jan Dittmer wrote:
> Andrew Morton wrote:
>
>>create-a-kstrdup-library-function.patch
>> create a kstrdup library function
>>
>>create-a-kstrdup-library-function-fixes.patch
>> create-a-kstrdup-library-function-fixes
Oops, forgot to include slab.h. I guess the other #include's were
including it somewhere down the line on x86, so it went unnoticed :(
The attached patch should fix this.
[PATCH] create-a-kstrdup-library-function-fix-include-slab
Signed-off-by: Paulo Marques <pmarques@grupopie.com>
--
Paulo Marques - www.grupopie.com
All that is necessary for the triumph of evil is that good men do nothing.
Edmund Burke (1729 - 1797)
[-- Attachment #2: strdup_fix_patch --]
[-- Type: text/plain, Size: 275 bytes --]
--- ./lib/string.c.orig 2005-04-08 16:07:14.000000000 +0100
+++ ./lib/string.c 2005-04-08 16:08:29.000000000 +0100
@@ -23,6 +23,7 @@
#include <linux/string.h>
#include <linux/ctype.h>
#include <linux/module.h>
+#include <linux/slab.h>
#ifndef __HAVE_ARCH_STRNICMP
/**
^ permalink raw reply [flat|nested] 27+ messages in thread
* Re: 2.6.12-rc2-mm2
2005-04-08 11:46 ` 2.6.12-rc2-mm2 Rafael J. Wysocki
@ 2005-04-08 16:44 ` Rafael J. Wysocki
0 siblings, 0 replies; 27+ messages in thread
From: Rafael J. Wysocki @ 2005-04-08 16:44 UTC (permalink / raw)
To: Andrew Morton; +Cc: Andi Kleen, linux-kernel
Hi,
On Friday, 8 of April 2005 13:46, Rafael J. Wysocki wrote:
> On Friday, 8 of April 2005 12:08, Andrew Morton wrote:
> >
> > ftp://ftp.kernel.org/pub/linux/kernel/people/akpm/patches/2.6/2.6.12-rc2/2.6.12-rc2-mm2/
> >
> >
> > - Although small, bk-audit.patch was causing conflits with a couple of
> > other projects. Dropped for now.
> >
> > - Greg is not using bk now, so bk-pci.patch, bk-i2c.patch,
> > bk-driver-core.patch and bk-usb.patch have been replaced with gregkh-*.patch
> > in -mm.
> >
> > - Largeish x86_64 update
>
> It does not compile on a uniprocessor x86-64:
>
> CC arch/x86_64/kernel/process.o
> CC arch/x86_64/kernel/semaphore.o
> CC arch/x86_64/kernel/signal.o
> AS arch/x86_64/kernel/entry.o
> CC arch/x86_64/kernel/traps.o
> CC arch/x86_64/kernel/irq.o
> CC arch/x86_64/kernel/ptrace.o
> CC arch/x86_64/kernel/time.o
> CC arch/x86_64/kernel/ioport.o
> CC arch/x86_64/kernel/ldt.o
> CC arch/x86_64/kernel/setup.o
> arch/x86_64/kernel/setup.c: In function `amd_detect_cmp':
> arch/x86_64/kernel/setup.c:759: error: `cpu_core_id' undeclared (first use in this function)
> arch/x86_64/kernel/setup.c:759: error: (Each undeclared identifier is reported only once
> arch/x86_64/kernel/setup.c:759: error: for each function it appears in.)
> make[1]: *** [arch/x86_64/kernel/setup.o] Error 1
> make: *** [arch/x86_64/kernel] Error 2
A fix follows (I hope it's correct).
Greets,
Rafael
Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
--- linux-2.6.12-rc2-mm2-orig/arch/x86_64/kernel/setup.c 2005-04-08 18:38:03.000000000 +0200
+++ linux-2.6.12-rc2-mm2/arch/x86_64/kernel/setup.c 2005-04-08 18:32:41.000000000 +0200
@@ -746,6 +746,7 @@ static void __init display_cacheinfo(str
}
}
+#ifdef CONFIG_SMP
/*
* On a AMD dual core setup the lower bits of the APIC id distingush the cores.
* Assumes number of cores is a power of two.
@@ -773,6 +774,11 @@ static void __init amd_detect_cmp(struct
printk(KERN_INFO "CPU %d(%d) -> Node %d -> Core %d\n",
cpu, c->x86_num_cores, node, cpu_core_id[cpu]);
}
+#else
+static void __init amd_detect_cmp(struct cpuinfo_x86 *c)
+{
+}
+#endif
static int __init init_amd(struct cpuinfo_x86 *c)
{
--
- Would you tell me, please, which way I ought to go from here?
- That depends a good deal on where you want to get to.
-- Lewis Carroll "Alice's Adventures in Wonderland"
^ permalink raw reply [flat|nested] 27+ messages in thread
* Re: 2.6.12-rc2-mm2
2005-04-08 10:08 2.6.12-rc2-mm2 Andrew Morton
` (4 preceding siblings ...)
2005-04-08 15:17 ` 2.6.12-rc2-mm2 Alexander Nyberg
@ 2005-04-08 17:28 ` Alexey Dobriyan
2005-04-08 13:52 ` 2.6.12-rc2-mm2 Martin Waitz
2005-04-08 23:28 ` 2.6.12-rc2-mm2 Jesper Juhl
` (3 subsequent siblings)
9 siblings, 1 reply; 27+ messages in thread
From: Alexey Dobriyan @ 2005-04-08 17:28 UTC (permalink / raw)
To: Martin Waitz; +Cc: linux-kernel, Andrew Morton, Sam Ravnborg
On Friday 08 April 2005 10:08, Andrew Morton wrote:
> +docbook-use-xmlto-to-process-the-docbook-files.patch
htmldocs (haven't look at pdf, etc...) became K&R'ish.
============================================================================
Synopsis
struct sk_buff * skb_share_check (skb,
pri);
struct sk_buff * skb;
int pri;
============================================================================
Also, Documentation/Docbook/*.html uses book1.html, but there are only
Documentation/Docbook/*/index.html
Functions are not hyperlinked from index.html. IIRC, they were in jadetex
days.
^ permalink raw reply [flat|nested] 27+ messages in thread
* Re: 2.6.12-rc2-mm2
2005-04-08 14:14 ` 2.6.12-rc2-mm2 Jan Dittmer
@ 2005-04-08 22:21 ` Andrew Morton
0 siblings, 0 replies; 27+ messages in thread
From: Andrew Morton @ 2005-04-08 22:21 UTC (permalink / raw)
To: Jan Dittmer
Cc: linux-kernel-u79uwXL29TY76Z2rM5mHXA,
acpi-devel-5NWGOfrQmneRv+LV9MX5uipxlwaOVQ5f
Jan Dittmer <j.dittmer-wDE+IXx/zk/R7s880joybQ@public.gmane.org> wrote:
>
> Andrew Morton wrote:
> > - The bk-acpi patch here causes my ia64 test box to hang during boot
>
> > bk-ia64.patch
>
> ia64 defconfig does not even build anymore:
>
>
> CC [M] drivers/char/agp/hp-agp.o
> In file included from /usr/src/ctest/mm/kernel/drivers/char/agp/hp-agp.c:18:
> include2/asm/acpi-ext.h:15: error: parse error before "hp_acpi_csr_space"
> include2/asm/acpi-ext.h:15: error: parse error before "u64"
> include2/asm/acpi-ext.h:15: warning: type defaults to `int' in declaration of `hp_acpi_csr_space'
I suppose this is needed.
--- 25/include/asm-ia64/acpi-ext.h~acpi-ext-build-fix Fri Apr 8 15:19:43 2005
+++ 25-akpm/include/asm-ia64/acpi-ext.h Fri Apr 8 15:20:12 2005
@@ -11,6 +11,7 @@
#define _ASM_IA64_ACPI_EXT_H
#include <linux/types.h>
+#include <acpi/actypes.h>
extern acpi_status hp_acpi_csr_space (acpi_handle, u64 *base, u64 *length);
_
-------------------------------------------------------
SF email is sponsored by - The IT Product Guide
Read honest & candid reviews on hundreds of IT Products from real users.
Discover which products truly live up to the hype. Start reading now.
http://ads.osdn.com/?ad_id=6595&alloc_id=14396&op=click
^ permalink raw reply [flat|nested] 27+ messages in thread
* Re: 2.6.12-rc2-mm2
@ 2005-04-08 22:21 ` Andrew Morton
0 siblings, 0 replies; 27+ messages in thread
From: Andrew Morton @ 2005-04-08 22:21 UTC (permalink / raw)
To: Jan Dittmer; +Cc: linux-kernel, acpi-devel
Jan Dittmer <j.dittmer@portrix.net> wrote:
>
> Andrew Morton wrote:
> > - The bk-acpi patch here causes my ia64 test box to hang during boot
>
> > bk-ia64.patch
>
> ia64 defconfig does not even build anymore:
>
>
> CC [M] drivers/char/agp/hp-agp.o
> In file included from /usr/src/ctest/mm/kernel/drivers/char/agp/hp-agp.c:18:
> include2/asm/acpi-ext.h:15: error: parse error before "hp_acpi_csr_space"
> include2/asm/acpi-ext.h:15: error: parse error before "u64"
> include2/asm/acpi-ext.h:15: warning: type defaults to `int' in declaration of `hp_acpi_csr_space'
I suppose this is needed.
--- 25/include/asm-ia64/acpi-ext.h~acpi-ext-build-fix Fri Apr 8 15:19:43 2005
+++ 25-akpm/include/asm-ia64/acpi-ext.h Fri Apr 8 15:20:12 2005
@@ -11,6 +11,7 @@
#define _ASM_IA64_ACPI_EXT_H
#include <linux/types.h>
+#include <acpi/actypes.h>
extern acpi_status hp_acpi_csr_space (acpi_handle, u64 *base, u64 *length);
_
^ permalink raw reply [flat|nested] 27+ messages in thread
* Re: 2.6.12-rc2-mm2
2005-04-08 10:08 2.6.12-rc2-mm2 Andrew Morton
` (5 preceding siblings ...)
2005-04-08 17:28 ` 2.6.12-rc2-mm2 Alexey Dobriyan
@ 2005-04-08 23:28 ` Jesper Juhl
2005-04-09 1:49 ` 2.6.12-rc2-mm2 Adrian Bunk
[not found] ` <20050408030835.4941cd98.akpm-3NddpPZAyC0@public.gmane.org>
` (2 subsequent siblings)
9 siblings, 1 reply; 27+ messages in thread
From: Jesper Juhl @ 2005-04-08 23:28 UTC (permalink / raw)
To: Andrew Morton; +Cc: linux-kernel
On Fri, 8 Apr 2005, Andrew Morton wrote:
>
> ftp://ftp.kernel.org/pub/linux/kernel/people/akpm/patches/2.6/2.6.12-rc2/2.6.12-rc2-mm2/
>
Still doesn't build for me with my usual config (available upon request)
unless I enable ACPI :
...
CC arch/i386/kernel/setup.o
arch/i386/kernel/setup.c:96: error: parse error before "acpi_sci_flags"
arch/i386/kernel/setup.c:96: warning: type defaults to `int' in declaration of `acpi_sci_flags'
arch/i386/kernel/setup.c:96: warning: data definition has no type or storage class
arch/i386/kernel/setup.c: In function `parse_cmdline_early':
arch/i386/kernel/setup.c:811: error: request for member `trigger' in something not a structure or union
arch/i386/kernel/setup.c:814: error: request for member `trigger' in something not a structure or union
arch/i386/kernel/setup.c:817: error: request for member `polarity' in something not a structure or union
arch/i386/kernel/setup.c:820: error: request for member `polarity' in something not a structure or union
make[1]: *** [arch/i386/kernel/setup.o] Error 1
make: *** [arch/i386/kernel] Error 2
--
Jesper Juhl
^ permalink raw reply [flat|nested] 27+ messages in thread
* Re: 2.6.12-rc2-mm2
2005-04-08 23:28 ` 2.6.12-rc2-mm2 Jesper Juhl
@ 2005-04-09 1:49 ` Adrian Bunk
2005-04-09 1:57 ` 2.6.12-rc2-mm2 Jesper Juhl
0 siblings, 1 reply; 27+ messages in thread
From: Adrian Bunk @ 2005-04-09 1:49 UTC (permalink / raw)
To: Jesper Juhl; +Cc: Andrew Morton, linux-kernel
On Sat, Apr 09, 2005 at 01:28:47AM +0200, Jesper Juhl wrote:
> On Fri, 8 Apr 2005, Andrew Morton wrote:
>
> >
> > ftp://ftp.kernel.org/pub/linux/kernel/people/akpm/patches/2.6/2.6.12-rc2/2.6.12-rc2-mm2/
> >
>
> Still doesn't build for me with my usual config (available upon request)
> unless I enable ACPI :
>
> ...
> CC arch/i386/kernel/setup.o
> arch/i386/kernel/setup.c:96: error: parse error before "acpi_sci_flags"
> arch/i386/kernel/setup.c:96: warning: type defaults to `int' in declaration of `acpi_sci_flags'
> arch/i386/kernel/setup.c:96: warning: data definition has no type or storage class
> arch/i386/kernel/setup.c: In function `parse_cmdline_early':
> arch/i386/kernel/setup.c:811: error: request for member `trigger' in something not a structure or union
> arch/i386/kernel/setup.c:814: error: request for member `trigger' in something not a structure or union
> arch/i386/kernel/setup.c:817: error: request for member `polarity' in something not a structure or union
> arch/i386/kernel/setup.c:820: error: request for member `polarity' in something not a structure or union
> make[1]: *** [arch/i386/kernel/setup.o] Error 1
> make: *** [arch/i386/kernel] Error 2
This seem to be the ACPI=y, ACPI_BOOT=n errors we already saw in -mm1
Len will send a patch for.
> Jesper Juhl
cu
Adrian
--
"Is there not promise of rain?" Ling Tan asked suddenly out
of the darkness. There had been need of rain for many days.
"Only a promise," Lao Er said.
Pearl S. Buck - Dragon Seed
^ permalink raw reply [flat|nested] 27+ messages in thread
* Re: 2.6.12-rc2-mm2
2005-04-09 1:49 ` 2.6.12-rc2-mm2 Adrian Bunk
@ 2005-04-09 1:57 ` Jesper Juhl
2005-04-09 12:51 ` 2.6.12-rc2-mm2 Adrian Bunk
0 siblings, 1 reply; 27+ messages in thread
From: Jesper Juhl @ 2005-04-09 1:57 UTC (permalink / raw)
To: Adrian Bunk; +Cc: Andrew Morton, linux-kernel
On Sat, 9 Apr 2005, Adrian Bunk wrote:
> On Sat, Apr 09, 2005 at 01:28:47AM +0200, Jesper Juhl wrote:
> > On Fri, 8 Apr 2005, Andrew Morton wrote:
> >
> > >
> > > ftp://ftp.kernel.org/pub/linux/kernel/people/akpm/patches/2.6/2.6.12-rc2/2.6.12-rc2-mm2/
> > >
> >
> > Still doesn't build for me with my usual config (available upon request)
> > unless I enable ACPI :
> >
> > ...
> > CC arch/i386/kernel/setup.o
> > arch/i386/kernel/setup.c:96: error: parse error before "acpi_sci_flags"
> > arch/i386/kernel/setup.c:96: warning: type defaults to `int' in declaration of `acpi_sci_flags'
> > arch/i386/kernel/setup.c:96: warning: data definition has no type or storage class
> > arch/i386/kernel/setup.c: In function `parse_cmdline_early':
> > arch/i386/kernel/setup.c:811: error: request for member `trigger' in something not a structure or union
> > arch/i386/kernel/setup.c:814: error: request for member `trigger' in something not a structure or union
> > arch/i386/kernel/setup.c:817: error: request for member `polarity' in something not a structure or union
> > arch/i386/kernel/setup.c:820: error: request for member `polarity' in something not a structure or union
> > make[1]: *** [arch/i386/kernel/setup.o] Error 1
> > make: *** [arch/i386/kernel] Error 2
>
> This seem to be the ACPI=y, ACPI_BOOT=n errors we already saw in -mm1
Actually, I get these errors with ACPI=n, ACPI_BOOT=y, not the reverse as
you say.
> Len will send a patch for.
>
Ok, I was not aware of that, will be looking forward to it :)
--
Jesper
^ permalink raw reply [flat|nested] 27+ messages in thread
* Re: 2.6.12-rc2-mm2
2005-04-09 1:57 ` 2.6.12-rc2-mm2 Jesper Juhl
@ 2005-04-09 12:51 ` Adrian Bunk
0 siblings, 0 replies; 27+ messages in thread
From: Adrian Bunk @ 2005-04-09 12:51 UTC (permalink / raw)
To: Jesper Juhl; +Cc: Andrew Morton, linux-kernel
On Sat, Apr 09, 2005 at 03:57:42AM +0200, Jesper Juhl wrote:
> On Sat, 9 Apr 2005, Adrian Bunk wrote:
> >
> > This seem to be the ACPI=y, ACPI_BOOT=n errors we already saw in -mm1
>
> Actually, I get these errors with ACPI=n, ACPI_BOOT=y, not the reverse as
> you say.
>...
Sorry, yesterday was my typo day... :-(
> Jesper
cu
Adrian
--
"Is there not promise of rain?" Ling Tan asked suddenly out
of the darkness. There had been need of rain for many days.
"Only a promise," Lao Er said.
Pearl S. Buck - Dragon Seed
^ permalink raw reply [flat|nested] 27+ messages in thread
* Re: 2.6.12-rc2-mm2
2005-04-08 10:08 2.6.12-rc2-mm2 Andrew Morton
@ 2005-04-09 13:43 ` Alexander Nyberg
2005-04-08 12:25 ` 2.6.12-rc2-mm2 Indrek Kruusa
` (8 subsequent siblings)
9 siblings, 0 replies; 27+ messages in thread
From: Alexander Nyberg @ 2005-04-09 13:43 UTC (permalink / raw)
To: Andrew Morton
Cc: linux-kernel-u79uwXL29TY76Z2rM5mHXA,
acpi-devel-5NWGOfrQmneRv+LV9MX5uipxlwaOVQ5f
[-- Attachment #1: Type: text/plain, Size: 2266 bytes --]
> ftp://ftp.kernel.org/pub/linux/kernel/people/akpm/patches/2.6/2.6.12-rc2/2.6.12-rc2-mm2/
>
> Changes since 2.6.12-rc2-mm1:
>
>
> bk-acpi.patch
[acpi-devel up on cc]
One of my boxen takes about 5 minutes to reboot now, hitting sysrq-p a
few times shows it mostly sits in in acpi_ut_find_allocation+0x2b/0x37.
Reverting bk-acpi.patch makes it reboot like normal, config attached.
(gdb) disass acpi_ut_find_allocation
Dump of assembler code for function acpi_ut_find_allocation:
0xc01daa2d <acpi_ut_find_allocation+0>: push %ebp
0xc01daa2e <acpi_ut_find_allocation+1>: mov %esp,%ebp
0xc01daa30 <acpi_ut_find_allocation+3>: push %esi
0xc01daa31 <acpi_ut_find_allocation+4>: mov %edx,%esi
0xc01daa33 <acpi_ut_find_allocation+6>: push %ebx
0xc01daa34 <acpi_ut_find_allocation+7>: mov %eax,%ebx
0xc01daa36 <acpi_ut_find_allocation+9>: call 0xc01dae66 <acpi_ut_track_stack_ptr>
0xc01daa3b <acpi_ut_find_allocation+14>: xor %edx,%edx
0xc01daa3d <acpi_ut_find_allocation+16>: cmp $0x6,%ebx
0xc01daa40 <acpi_ut_find_allocation+19>: ja 0xc01daa5e <acpi_ut_find_allocation+49>
0xc01daa42 <acpi_ut_find_allocation+21>: imul $0x24,%ebx,%eax
0xc01daa45 <acpi_ut_find_allocation+24>: mov 0xc03c1040(%eax),%eax
0xc01daa4b <acpi_ut_find_allocation+30>: test %eax,%eax
0xc01daa4d <acpi_ut_find_allocation+32>: je 0xc01daa5c <acpi_ut_find_allocation+47>
0xc01daa4f <acpi_ut_find_allocation+34>: cmp %esi,%eax
0xc01daa51 <acpi_ut_find_allocation+36>: mov %eax,%edx
0xc01daa53 <acpi_ut_find_allocation+38>: je 0xc01daa5e <acpi_ut_find_allocation+49>
0xc01daa55 <acpi_ut_find_allocation+40>: mov 0x4(%eax),%eax
0xc01daa58 <acpi_ut_find_allocation+43>: test %eax,%eax
0xc01daa5a <acpi_ut_find_allocation+45>: jne 0xc01daa4f <acpi_ut_find_allocation+34>
0xc01daa5c <acpi_ut_find_allocation+47>: xor %edx,%edx
0xc01daa5e <acpi_ut_find_allocation+49>: pop %ebx
0xc01daa5f <acpi_ut_find_allocation+50>: pop %esi
0xc01daa60 <acpi_ut_find_allocation+51>: mov %edx,%eax
0xc01daa62 <acpi_ut_find_allocation+53>: leave
0xc01daa63 <acpi_ut_find_allocation+54>: ret
End of assembler dump.
[-- Attachment #2: config --]
[-- Type: text/plain, Size: 18180 bytes --]
#
# Automatically generated make config: don't edit
# Linux kernel version: 2.6.12-rc2-mm2
# Sat Apr 9 13:27:39 2005
#
CONFIG_X86=y
CONFIG_MMU=y
CONFIG_UID16=y
CONFIG_GENERIC_ISA_DMA=y
CONFIG_GENERIC_IOMAP=y
#
# Code maturity level options
#
CONFIG_EXPERIMENTAL=y
# CONFIG_CLEAN_COMPILE is not set
CONFIG_BROKEN=y
CONFIG_BROKEN_ON_SMP=y
CONFIG_LOCK_KERNEL=y
CONFIG_INIT_ENV_ARG_LIMIT=32
#
# General setup
#
CONFIG_LOCALVERSION=""
# CONFIG_LOCALVERSION_AUTO is not set
CONFIG_SWAP=y
CONFIG_SYSVIPC=y
# CONFIG_POSIX_MQUEUE is not set
# CONFIG_BSD_PROCESS_ACCT is not set
CONFIG_SYSCTL=y
# CONFIG_AUDIT is not set
# CONFIG_HOTPLUG is not set
# CONFIG_KOBJECT_UEVENT is not set
# CONFIG_IKCONFIG is not set
CONFIG_EMBEDDED=y
CONFIG_KALLSYMS=y
# CONFIG_KALLSYMS_ALL is not set
# CONFIG_KALLSYMS_EXTRA_PASS is not set
CONFIG_PRINTK=y
CONFIG_BUG=y
CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
CONFIG_EPOLL=y
# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
CONFIG_SHMEM=y
CONFIG_CC_ALIGN_FUNCTIONS=0
CONFIG_CC_ALIGN_LABELS=0
CONFIG_CC_ALIGN_LOOPS=0
CONFIG_CC_ALIGN_JUMPS=0
# CONFIG_TINY_SHMEM is not set
CONFIG_BASE_SMALL=0
#
# Loadable module support
#
CONFIG_MODULES=y
# CONFIG_MODULE_UNLOAD is not set
CONFIG_OBSOLETE_MODPARM=y
# CONFIG_MODVERSIONS is not set
# CONFIG_MODULE_SRCVERSION_ALL is not set
# CONFIG_KMOD is not set
#
# Processor type and features
#
CONFIG_X86_PC=y
# CONFIG_X86_ELAN is not set
# CONFIG_X86_VOYAGER is not set
# CONFIG_X86_NUMAQ is not set
# CONFIG_X86_SUMMIT is not set
# CONFIG_X86_BIGSMP is not set
# CONFIG_X86_VISWS is not set
# CONFIG_X86_GENERICARCH is not set
# CONFIG_X86_ES7000 is not set
# CONFIG_M386 is not set
# CONFIG_M486 is not set
# CONFIG_M586 is not set
# CONFIG_M586TSC is not set
# CONFIG_M586MMX is not set
# CONFIG_M686 is not set
# CONFIG_MPENTIUMII is not set
# CONFIG_MPENTIUMIII is not set
# CONFIG_MPENTIUMM is not set
# CONFIG_MPENTIUM4 is not set
# CONFIG_MK6 is not set
CONFIG_MK7=y
# CONFIG_MK8 is not set
# CONFIG_MCRUSOE is not set
# CONFIG_MEFFICEON is not set
# CONFIG_MWINCHIPC6 is not set
# CONFIG_MWINCHIP2 is not set
# CONFIG_MWINCHIP3D is not set
# CONFIG_MGEODEGX1 is not set
# CONFIG_MCYRIXIII is not set
# CONFIG_MVIAC3_2 is not set
# CONFIG_X86_GENERIC is not set
CONFIG_X86_CMPXCHG=y
CONFIG_X86_XADD=y
CONFIG_X86_L1_CACHE_SHIFT=6
CONFIG_RWSEM_XCHGADD_ALGORITHM=y
CONFIG_GENERIC_CALIBRATE_DELAY=y
CONFIG_X86_WP_WORKS_OK=y
CONFIG_X86_INVLPG=y
CONFIG_X86_BSWAP=y
CONFIG_X86_POPAD_OK=y
CONFIG_X86_GOOD_APIC=y
CONFIG_X86_INTEL_USERCOPY=y
CONFIG_X86_USE_PPRO_CHECKSUM=y
CONFIG_X86_USE_3DNOW=y
CONFIG_HPET_TIMER=y
# CONFIG_SMP is not set
CONFIG_PREEMPT=y
CONFIG_PREEMPT_BKL=y
CONFIG_X86_UP_APIC=y
CONFIG_X86_UP_IOAPIC=y
CONFIG_X86_LOCAL_APIC=y
CONFIG_X86_IO_APIC=y
CONFIG_X86_TSC=y
CONFIG_X86_MCE=y
CONFIG_X86_MCE_NONFATAL=y
# CONFIG_X86_MCE_P4THERMAL is not set
# CONFIG_TOSHIBA is not set
# CONFIG_I8K is not set
# CONFIG_MICROCODE is not set
# CONFIG_X86_MSR is not set
# CONFIG_X86_CPUID is not set
#
# Firmware Drivers
#
# CONFIG_EDD is not set
# CONFIG_NOHIGHMEM is not set
CONFIG_HIGHMEM4G=y
# CONFIG_HIGHMEM64G is not set
CONFIG_HIGHMEM=y
CONFIG_FLATMEM=y
# CONFIG_DISCONTIGMEM is not set
# CONFIG_HIGHPTE is not set
# CONFIG_MATH_EMULATION is not set
CONFIG_MTRR=y
# CONFIG_EFI is not set
CONFIG_HAVE_DEC_LOCK=y
CONFIG_REGPARM=y
CONFIG_SECCOMP=y
#
# Performance-monitoring counters support
#
# CONFIG_PERFCTR is not set
CONFIG_PHYSICAL_START=0x100000
CONFIG_KEXEC=y
CONFIG_CRASH_DUMP=y
#
# Power management options (ACPI, APM)
#
CONFIG_PM=y
# CONFIG_PM_DEBUG is not set
CONFIG_SOFTWARE_SUSPEND=y
CONFIG_PM_STD_PARTITION=""
#
# ACPI (Advanced Configuration and Power Interface) Support
#
CONFIG_ACPI=y
CONFIG_ACPI_BOOT=y
CONFIG_ACPI_INTERPRETER=y
CONFIG_ACPI_SLEEP=y
CONFIG_ACPI_SLEEP_PROC_FS=y
# CONFIG_ACPI_AC is not set
# CONFIG_ACPI_BATTERY is not set
# CONFIG_ACPI_BUTTON is not set
# CONFIG_ACPI_VIDEO is not set
# CONFIG_ACPI_HOTKEY is not set
# CONFIG_ACPI_FAN is not set
# CONFIG_ACPI_PROCESSOR is not set
# CONFIG_ACPI_ASUS is not set
# CONFIG_ACPI_IBM is not set
# CONFIG_ACPI_TOSHIBA is not set
CONFIG_ACPI_BLACKLIST_YEAR=0
CONFIG_ACPI_DEBUG=y
CONFIG_ACPI_BUS=y
CONFIG_ACPI_EC=y
CONFIG_ACPI_POWER=y
CONFIG_ACPI_PCI=y
CONFIG_ACPI_SYSTEM=y
# CONFIG_X86_PM_TIMER is not set
# CONFIG_ACPI_CONTAINER is not set
#
# APM (Advanced Power Management) BIOS Support
#
# CONFIG_APM is not set
#
# CPU Frequency scaling
#
# CONFIG_CPU_FREQ is not set
#
# Bus options (PCI, PCMCIA, EISA, MCA, ISA)
#
CONFIG_PCI=y
# CONFIG_PCI_GOBIOS is not set
# CONFIG_PCI_GOMMCONFIG is not set
# CONFIG_PCI_GODIRECT is not set
CONFIG_PCI_GOANY=y
CONFIG_PCI_BIOS=y
CONFIG_PCI_DIRECT=y
CONFIG_PCI_MMCONFIG=y
# CONFIG_PCIEPORTBUS is not set
# CONFIG_PCI_MSI is not set
# CONFIG_PCI_LEGACY_PROC is not set
CONFIG_PCI_NAMES=y
# CONFIG_PCI_DEBUG is not set
# CONFIG_ISA is not set
# CONFIG_MCA is not set
# CONFIG_SCx200 is not set
#
# PCCARD (PCMCIA/CardBus) support
#
# CONFIG_PCCARD is not set
#
# PCI Hotplug Support
#
# CONFIG_HOTPLUG_PCI is not set
#
# Executable file formats
#
CONFIG_BINFMT_ELF=y
# CONFIG_BINFMT_AOUT is not set
# CONFIG_BINFMT_MISC is not set
#
# Networking
#
CONFIG_NET=y
#
# Networking protocols
#
CONFIG_INET=y
# CONFIG_IP_MULTICAST is not set
# CONFIG_IP_ADVANCED_ROUTER is not set
# CONFIG_IP_PNP is not set
# CONFIG_NET_IPIP is not set
# CONFIG_NET_IPGRE is not set
# CONFIG_ARPD is not set
# CONFIG_SYN_COOKIES is not set
# CONFIG_INET_AH is not set
# CONFIG_INET_ESP is not set
# CONFIG_INET_IPCOMP is not set
# CONFIG_INET_TUNNEL is not set
CONFIG_IP_TCPDIAG=y
# CONFIG_IP_TCPDIAG_IPV6 is not set
# CONFIG_IPV6 is not set
# CONFIG_IP_SCTP is not set
# CONFIG_DECNET is not set
# CONFIG_LLC2 is not set
# CONFIG_IPX is not set
# CONFIG_ATALK is not set
# CONFIG_X25 is not set
# CONFIG_LAPB is not set
# CONFIG_ECONET is not set
#
# Network packet filtering
#
# CONFIG_NETFILTER is not set
#
# QoS and/or fair queueing
#
# CONFIG_NET_SCHED is not set
# CONFIG_NET_CLS_ROUTE is not set
# CONFIG_NET_KEY is not set
CONFIG_PACKET=y
CONFIG_PACKET_MMAP=y
CONFIG_UNIX=y
# CONFIG_BRIDGE is not set
# CONFIG_VLAN_8021Q is not set
# CONFIG_WAN_ROUTER is not set
#
# Amateur Radio support
#
# CONFIG_HAMRADIO is not set
#
# IrDA (infrared) subsystem support
#
# CONFIG_IRDA is not set
#
# Bluetooth subsystem support
#
# CONFIG_BT is not set
# CONFIG_IEEE80211 is not set
#
# Asynchronous Transfer Mode (ATM)
#
# CONFIG_ATM is not set
#
# Network testing
#
# CONFIG_NET_DIVERT is not set
# CONFIG_NET_PKTGEN is not set
# CONFIG_KGDBOE is not set
CONFIG_NETPOLL=y
# CONFIG_NETPOLL_RX is not set
# CONFIG_NETPOLL_TRAP is not set
CONFIG_NET_POLL_CONTROLLER=y
#
# Device Drivers
#
#
# Generic Driver Options
#
CONFIG_STANDALONE=y
# CONFIG_PREVENT_FIRMWARE_BUILD is not set
# CONFIG_FW_LOADER is not set
# CONFIG_DEBUG_DRIVER is not set
#
# Memory Technology Devices (MTD)
#
# CONFIG_MTD is not set
#
# Parallel port support
#
# CONFIG_PARPORT is not set
#
# Plug and Play support
#
# CONFIG_PNP is not set
#
# Block devices
#
# CONFIG_BLK_DEV_FD is not set
# CONFIG_BLK_CPQ_DA is not set
# CONFIG_BLK_CPQ_CISS_DA is not set
# CONFIG_BLK_DEV_DAC960 is not set
# CONFIG_BLK_DEV_UMEM is not set
# CONFIG_BLK_DEV_COW_COMMON is not set
# CONFIG_BLK_DEV_LOOP is not set
# CONFIG_BLK_DEV_NBD is not set
# CONFIG_BLK_DEV_SX8 is not set
# CONFIG_BLK_DEV_RAM is not set
CONFIG_BLK_DEV_RAM_COUNT=16
CONFIG_INITRAMFS_SOURCE=""
# CONFIG_LBD is not set
# CONFIG_CDROM_PKTCDVD is not set
#
# IO Schedulers
#
CONFIG_IOSCHED_NOOP=y
CONFIG_IOSCHED_AS=y
CONFIG_IOSCHED_DEADLINE=y
CONFIG_IOSCHED_CFQ=y
# CONFIG_ATA_OVER_ETH is not set
#
# ATA/ATAPI/MFM/RLL support
#
CONFIG_IDE=y
CONFIG_BLK_DEV_IDE=y
#
# Please see Documentation/ide.txt for help/info on IDE drives
#
# CONFIG_BLK_DEV_IDE_SATA is not set
# CONFIG_BLK_DEV_HD_IDE is not set
CONFIG_BLK_DEV_IDEDISK=y
CONFIG_IDEDISK_MULTI_MODE=y
# CONFIG_BLK_DEV_IDECD is not set
# CONFIG_BLK_DEV_IDETAPE is not set
# CONFIG_BLK_DEV_IDEFLOPPY is not set
# CONFIG_IDE_TASK_IOCTL is not set
#
# IDE chipset support/bugfixes
#
CONFIG_IDE_GENERIC=y
# CONFIG_BLK_DEV_CMD640 is not set
CONFIG_BLK_DEV_IDEPCI=y
CONFIG_IDEPCI_SHARE_IRQ=y
# CONFIG_BLK_DEV_OFFBOARD is not set
# CONFIG_BLK_DEV_GENERIC is not set
# CONFIG_BLK_DEV_OPTI621 is not set
# CONFIG_BLK_DEV_RZ1000 is not set
CONFIG_BLK_DEV_IDEDMA_PCI=y
# CONFIG_BLK_DEV_IDEDMA_FORCED is not set
CONFIG_IDEDMA_PCI_AUTO=y
# CONFIG_IDEDMA_ONLYDISK is not set
# CONFIG_BLK_DEV_AEC62XX is not set
# CONFIG_BLK_DEV_ALI15X3 is not set
# CONFIG_BLK_DEV_AMD74XX is not set
# CONFIG_BLK_DEV_ATIIXP is not set
# CONFIG_BLK_DEV_CMD64X is not set
# CONFIG_BLK_DEV_TRIFLEX is not set
# CONFIG_BLK_DEV_CY82C693 is not set
# CONFIG_BLK_DEV_CS5520 is not set
# CONFIG_BLK_DEV_CS5530 is not set
# CONFIG_BLK_DEV_HPT34X is not set
CONFIG_BLK_DEV_HPT366=y
# CONFIG_BLK_DEV_SC1200 is not set
# CONFIG_BLK_DEV_PIIX is not set
# CONFIG_BLK_DEV_NS87415 is not set
# CONFIG_BLK_DEV_PDC202XX_OLD is not set
# CONFIG_BLK_DEV_PDC202XX_NEW is not set
# CONFIG_BLK_DEV_SVWKS is not set
# CONFIG_BLK_DEV_SIIMAGE is not set
# CONFIG_BLK_DEV_SIS5513 is not set
# CONFIG_BLK_DEV_SLC90E66 is not set
# CONFIG_BLK_DEV_TRM290 is not set
CONFIG_BLK_DEV_VIA82CXXX=y
# CONFIG_IDE_ARM is not set
CONFIG_BLK_DEV_IDEDMA=y
# CONFIG_IDEDMA_IVB is not set
CONFIG_IDEDMA_AUTO=y
# CONFIG_BLK_DEV_HD is not set
#
# SCSI device support
#
# CONFIG_SCSI is not set
#
# Multi-device support (RAID and LVM)
#
# CONFIG_MD is not set
#
# Fusion MPT device support
#
#
# IEEE 1394 (FireWire) support
#
# CONFIG_IEEE1394 is not set
#
# I2O device support
#
# CONFIG_I2O is not set
#
# Network device support
#
CONFIG_NETDEVICES=y
# CONFIG_DUMMY is not set
# CONFIG_BONDING is not set
# CONFIG_EQUALIZER is not set
CONFIG_TUN=y
#
# ARCnet devices
#
# CONFIG_ARCNET is not set
#
# Ethernet (10 or 100Mbit)
#
CONFIG_NET_ETHERNET=y
CONFIG_MII=y
# CONFIG_HAPPYMEAL is not set
# CONFIG_SUNGEM is not set
CONFIG_NET_VENDOR_3COM=y
CONFIG_VORTEX=y
# CONFIG_TYPHOON is not set
#
# Tulip family network device support
#
CONFIG_NET_TULIP=y
# CONFIG_DE2104X is not set
CONFIG_TULIP=y
# CONFIG_TULIP_MWI is not set
# CONFIG_TULIP_MMIO is not set
# CONFIG_TULIP_NAPI is not set
# CONFIG_DE4X5 is not set
# CONFIG_WINBOND_840 is not set
# CONFIG_DM9102 is not set
# CONFIG_HP100 is not set
CONFIG_NET_PCI=y
# CONFIG_PCNET32 is not set
# CONFIG_AMD8111_ETH is not set
# CONFIG_ADAPTEC_STARFIRE is not set
# CONFIG_B44 is not set
# CONFIG_FORCEDETH is not set
# CONFIG_DGRS is not set
# CONFIG_EEPRO100 is not set
CONFIG_E100=y
# CONFIG_FEALNX is not set
# CONFIG_NATSEMI is not set
# CONFIG_NE2K_PCI is not set
# CONFIG_8139CP is not set
# CONFIG_8139TOO is not set
# CONFIG_SIS900 is not set
# CONFIG_EPIC100 is not set
# CONFIG_SUNDANCE is not set
# CONFIG_TLAN is not set
CONFIG_VIA_RHINE=y
# CONFIG_VIA_RHINE_MMIO is not set
#
# Ethernet (1000 Mbit)
#
# CONFIG_ACENIC is not set
# CONFIG_DL2K is not set
# CONFIG_E1000 is not set
# CONFIG_NS83820 is not set
# CONFIG_HAMACHI is not set
# CONFIG_YELLOWFIN is not set
# CONFIG_R8169 is not set
# CONFIG_SKGE is not set
# CONFIG_SK98LIN is not set
# CONFIG_VIA_VELOCITY is not set
# CONFIG_TIGON3 is not set
#
# Ethernet (10000 Mbit)
#
# CONFIG_CHELSIO_T1 is not set
# CONFIG_IXGB is not set
# CONFIG_S2IO is not set
#
# Token Ring devices
#
# CONFIG_TR is not set
#
# Wireless LAN (non-hamradio)
#
# CONFIG_NET_RADIO is not set
#
# Wan interfaces
#
# CONFIG_WAN is not set
# CONFIG_FDDI is not set
# CONFIG_HIPPI is not set
# CONFIG_PPP is not set
# CONFIG_SLIP is not set
# CONFIG_SHAPER is not set
CONFIG_NETCONSOLE=y
#
# ISDN subsystem
#
# CONFIG_ISDN is not set
#
# Telephony Support
#
# CONFIG_PHONE is not set
#
# Input device support
#
CONFIG_INPUT=y
#
# Userland interfaces
#
CONFIG_INPUT_MOUSEDEV=y
# CONFIG_INPUT_MOUSEDEV_PSAUX is not set
CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
# CONFIG_INPUT_JOYDEV is not set
# CONFIG_INPUT_TSDEV is not set
# CONFIG_INPUT_EVDEV is not set
# CONFIG_INPUT_EVBUG is not set
#
# Input Device Drivers
#
CONFIG_INPUT_KEYBOARD=y
CONFIG_KEYBOARD_ATKBD=y
# CONFIG_KEYBOARD_SUNKBD is not set
# CONFIG_KEYBOARD_LKKBD is not set
# CONFIG_KEYBOARD_XTKBD is not set
# CONFIG_KEYBOARD_NEWTON is not set
# CONFIG_INPUT_MOUSE is not set
# CONFIG_INPUT_JOYSTICK is not set
# CONFIG_INPUT_TOUCHSCREEN is not set
# CONFIG_INPUT_MISC is not set
#
# Hardware I/O ports
#
CONFIG_SERIO=y
CONFIG_SERIO_I8042=y
# CONFIG_SERIO_SERPORT is not set
# CONFIG_SERIO_CT82C710 is not set
# CONFIG_SERIO_PCIPS2 is not set
CONFIG_SERIO_LIBPS2=y
# CONFIG_SERIO_RAW is not set
# CONFIG_GAMEPORT is not set
#
# Character devices
#
CONFIG_VT=y
CONFIG_VT_CONSOLE=y
CONFIG_HW_CONSOLE=y
# CONFIG_SERIAL_NONSTANDARD is not set
#
# Serial drivers
#
CONFIG_SERIAL_8250=y
CONFIG_SERIAL_8250_CONSOLE=y
# CONFIG_SERIAL_8250_ACPI is not set
CONFIG_SERIAL_8250_NR_UARTS=4
# CONFIG_SERIAL_8250_EXTENDED is not set
#
# Non-8250 serial port support
#
CONFIG_SERIAL_CORE=y
CONFIG_SERIAL_CORE_CONSOLE=y
# CONFIG_SERIAL_JSM is not set
CONFIG_UNIX98_PTYS=y
# CONFIG_LEGACY_PTYS is not set
#
# IPMI
#
# CONFIG_IPMI_HANDLER is not set
#
# Watchdog Cards
#
# CONFIG_WATCHDOG is not set
# CONFIG_HW_RANDOM is not set
# CONFIG_NVRAM is not set
# CONFIG_RTC is not set
# CONFIG_GEN_RTC is not set
# CONFIG_DTLK is not set
# CONFIG_R3964 is not set
# CONFIG_APPLICOM is not set
# CONFIG_SONYPI is not set
#
# Ftape, the floppy tape device driver
#
# CONFIG_FTAPE is not set
# CONFIG_AGP is not set
# CONFIG_DRM is not set
# CONFIG_MWAVE is not set
# CONFIG_RAW_DRIVER is not set
# CONFIG_HPET is not set
# CONFIG_HANGCHECK_TIMER is not set
#
# TPM devices
#
# CONFIG_TCG_TPM is not set
#
# I2C support
#
# CONFIG_I2C is not set
#
# Dallas's 1-wire bus
#
# CONFIG_W1 is not set
#
# Misc devices
#
# CONFIG_IBM_ASM is not set
#
# Multimedia devices
#
# CONFIG_VIDEO_DEV is not set
#
# Digital Video Broadcasting Devices
#
# CONFIG_DVB is not set
#
# Graphics support
#
# CONFIG_FB is not set
# CONFIG_VIDEO_SELECT is not set
#
# Console display driver support
#
CONFIG_VGA_CONSOLE=y
CONFIG_DUMMY_CONSOLE=y
#
# Sound
#
# CONFIG_SOUND is not set
#
# USB support
#
CONFIG_USB_ARCH_HAS_HCD=y
CONFIG_USB_ARCH_HAS_OHCI=y
# CONFIG_USB is not set
#
# USB Gadget Support
#
# CONFIG_USB_GADGET is not set
#
# MMC/SD Card support
#
# CONFIG_MMC is not set
#
# InfiniBand support
#
# CONFIG_INFINIBAND is not set
#
# File systems
#
# CONFIG_EXT2_FS is not set
CONFIG_EXT3_FS=y
# CONFIG_EXT3_FS_XATTR is not set
CONFIG_JBD=y
# CONFIG_JBD_DEBUG is not set
# CONFIG_REISERFS_FS is not set
# CONFIG_JFS_FS is not set
#
# XFS support
#
# CONFIG_XFS_FS is not set
# CONFIG_MINIX_FS is not set
# CONFIG_ROMFS_FS is not set
# CONFIG_INOTIFY is not set
# CONFIG_QUOTA is not set
# CONFIG_DNOTIFY is not set
# CONFIG_AUTOFS_FS is not set
# CONFIG_AUTOFS4_FS is not set
#
# Caches
#
# CONFIG_FSCACHE is not set
# CONFIG_FUSE_FS is not set
#
# CD-ROM/DVD Filesystems
#
# CONFIG_ISO9660_FS is not set
# CONFIG_UDF_FS is not set
#
# DOS/FAT/NT Filesystems
#
# CONFIG_MSDOS_FS is not set
# CONFIG_VFAT_FS is not set
# CONFIG_NTFS_FS is not set
#
# Pseudo filesystems
#
CONFIG_PROC_FS=y
CONFIG_PROC_KCORE=y
# CONFIG_PROC_VMCORE is not set
CONFIG_SYSFS=y
# CONFIG_DEVFS_FS is not set
# CONFIG_DEVPTS_FS_XATTR is not set
CONFIG_TMPFS=y
# CONFIG_TMPFS_XATTR is not set
# CONFIG_HUGETLBFS is not set
# CONFIG_HUGETLB_PAGE is not set
CONFIG_RAMFS=y
# CONFIG_RELAYFS_FS is not set
#
# Miscellaneous filesystems
#
# CONFIG_ADFS_FS is not set
# CONFIG_AFFS_FS is not set
# CONFIG_HFS_FS is not set
# CONFIG_HFSPLUS_FS is not set
# CONFIG_BEFS_FS is not set
# CONFIG_BFS_FS is not set
# CONFIG_EFS_FS is not set
# CONFIG_CRAMFS is not set
# CONFIG_VXFS_FS is not set
# CONFIG_HPFS_FS is not set
# CONFIG_QNX4FS_FS is not set
# CONFIG_SYSV_FS is not set
# CONFIG_UFS_FS is not set
#
# Network File Systems
#
# CONFIG_NFS_FS is not set
# CONFIG_NFSD is not set
# CONFIG_SMB_FS is not set
# CONFIG_CIFS is not set
# CONFIG_NCP_FS is not set
# CONFIG_CODA_FS is not set
# CONFIG_AFS_FS is not set
#
# Partition Types
#
# CONFIG_PARTITION_ADVANCED is not set
CONFIG_MSDOS_PARTITION=y
#
# Native Language Support
#
# CONFIG_NLS is not set
#
# Profiling support
#
CONFIG_PROFILING=y
CONFIG_OPROFILE=y
#
# Kernel hacking
#
# CONFIG_PRINTK_TIME is not set
CONFIG_DEBUG_KERNEL=y
CONFIG_MAGIC_SYSRQ=y
CONFIG_LOG_BUF_SHIFT=16
CONFIG_DETECT_SOFTLOCKUP=y
# CONFIG_SCHEDSTATS is not set
CONFIG_DEBUG_SLAB=y
CONFIG_DEBUG_PREEMPT=y
# CONFIG_DEBUG_SPINLOCK is not set
# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
# CONFIG_DEBUG_KOBJECT is not set
# CONFIG_DEBUG_HIGHMEM is not set
# CONFIG_DEBUG_BUGVERBOSE is not set
CONFIG_DEBUG_INFO=y
# CONFIG_PAGE_OWNER is not set
# CONFIG_DEBUG_FS is not set
CONFIG_FRAME_POINTER=y
CONFIG_EARLY_PRINTK=y
CONFIG_DEBUG_STACKOVERFLOW=y
# CONFIG_KPROBES is not set
# CONFIG_DEBUG_STACK_USAGE is not set
#
# Page alloc debug is incompatible with Software Suspend on i386
#
CONFIG_4KSTACKS=y
CONFIG_X86_FIND_SMP_CONFIG=y
CONFIG_X86_MPPARSE=y
# CONFIG_KGDB is not set
#
# Security options
#
# CONFIG_KEYS is not set
# CONFIG_SECURITY is not set
#
# Cryptographic options
#
CONFIG_CRYPTO=y
# CONFIG_CRYPTO_HMAC is not set
# CONFIG_CRYPTO_NULL is not set
# CONFIG_CRYPTO_MD4 is not set
CONFIG_CRYPTO_MD5=y
# CONFIG_CRYPTO_SHA1 is not set
# CONFIG_CRYPTO_SHA256 is not set
# CONFIG_CRYPTO_SHA512 is not set
# CONFIG_CRYPTO_WP512 is not set
# CONFIG_CRYPTO_TGR192 is not set
CONFIG_CRYPTO_DES=y
# CONFIG_CRYPTO_BLOWFISH is not set
# CONFIG_CRYPTO_TWOFISH is not set
# CONFIG_CRYPTO_SERPENT is not set
CONFIG_CRYPTO_AES_586=y
# CONFIG_CRYPTO_CAST5 is not set
# CONFIG_CRYPTO_CAST6 is not set
# CONFIG_CRYPTO_TEA is not set
# CONFIG_CRYPTO_ARC4 is not set
# CONFIG_CRYPTO_KHAZAD is not set
# CONFIG_CRYPTO_ANUBIS is not set
# CONFIG_CRYPTO_DEFLATE is not set
# CONFIG_CRYPTO_MICHAEL_MIC is not set
# CONFIG_CRYPTO_CRC32C is not set
# CONFIG_CRYPTO_TEST is not set
#
# Hardware crypto devices
#
# CONFIG_CRYPTO_DEV_PADLOCK is not set
#
# Library routines
#
# CONFIG_CRC_CCITT is not set
CONFIG_CRC32=y
# CONFIG_LIBCRC32C is not set
CONFIG_GENERIC_HARDIRQS=y
CONFIG_GENERIC_IRQ_PROBE=y
CONFIG_X86_BIOS_REBOOT=y
^ permalink raw reply [flat|nested] 27+ messages in thread
* Re: 2.6.12-rc2-mm2
@ 2005-04-09 13:43 ` Alexander Nyberg
0 siblings, 0 replies; 27+ messages in thread
From: Alexander Nyberg @ 2005-04-09 13:43 UTC (permalink / raw)
To: Andrew Morton; +Cc: linux-kernel, acpi-devel
[-- Attachment #1: Type: text/plain, Size: 2266 bytes --]
> ftp://ftp.kernel.org/pub/linux/kernel/people/akpm/patches/2.6/2.6.12-rc2/2.6.12-rc2-mm2/
>
> Changes since 2.6.12-rc2-mm1:
>
>
> bk-acpi.patch
[acpi-devel up on cc]
One of my boxen takes about 5 minutes to reboot now, hitting sysrq-p a
few times shows it mostly sits in in acpi_ut_find_allocation+0x2b/0x37.
Reverting bk-acpi.patch makes it reboot like normal, config attached.
(gdb) disass acpi_ut_find_allocation
Dump of assembler code for function acpi_ut_find_allocation:
0xc01daa2d <acpi_ut_find_allocation+0>: push %ebp
0xc01daa2e <acpi_ut_find_allocation+1>: mov %esp,%ebp
0xc01daa30 <acpi_ut_find_allocation+3>: push %esi
0xc01daa31 <acpi_ut_find_allocation+4>: mov %edx,%esi
0xc01daa33 <acpi_ut_find_allocation+6>: push %ebx
0xc01daa34 <acpi_ut_find_allocation+7>: mov %eax,%ebx
0xc01daa36 <acpi_ut_find_allocation+9>: call 0xc01dae66 <acpi_ut_track_stack_ptr>
0xc01daa3b <acpi_ut_find_allocation+14>: xor %edx,%edx
0xc01daa3d <acpi_ut_find_allocation+16>: cmp $0x6,%ebx
0xc01daa40 <acpi_ut_find_allocation+19>: ja 0xc01daa5e <acpi_ut_find_allocation+49>
0xc01daa42 <acpi_ut_find_allocation+21>: imul $0x24,%ebx,%eax
0xc01daa45 <acpi_ut_find_allocation+24>: mov 0xc03c1040(%eax),%eax
0xc01daa4b <acpi_ut_find_allocation+30>: test %eax,%eax
0xc01daa4d <acpi_ut_find_allocation+32>: je 0xc01daa5c <acpi_ut_find_allocation+47>
0xc01daa4f <acpi_ut_find_allocation+34>: cmp %esi,%eax
0xc01daa51 <acpi_ut_find_allocation+36>: mov %eax,%edx
0xc01daa53 <acpi_ut_find_allocation+38>: je 0xc01daa5e <acpi_ut_find_allocation+49>
0xc01daa55 <acpi_ut_find_allocation+40>: mov 0x4(%eax),%eax
0xc01daa58 <acpi_ut_find_allocation+43>: test %eax,%eax
0xc01daa5a <acpi_ut_find_allocation+45>: jne 0xc01daa4f <acpi_ut_find_allocation+34>
0xc01daa5c <acpi_ut_find_allocation+47>: xor %edx,%edx
0xc01daa5e <acpi_ut_find_allocation+49>: pop %ebx
0xc01daa5f <acpi_ut_find_allocation+50>: pop %esi
0xc01daa60 <acpi_ut_find_allocation+51>: mov %edx,%eax
0xc01daa62 <acpi_ut_find_allocation+53>: leave
0xc01daa63 <acpi_ut_find_allocation+54>: ret
End of assembler dump.
[-- Attachment #2: config --]
[-- Type: text/plain, Size: 18180 bytes --]
#
# Automatically generated make config: don't edit
# Linux kernel version: 2.6.12-rc2-mm2
# Sat Apr 9 13:27:39 2005
#
CONFIG_X86=y
CONFIG_MMU=y
CONFIG_UID16=y
CONFIG_GENERIC_ISA_DMA=y
CONFIG_GENERIC_IOMAP=y
#
# Code maturity level options
#
CONFIG_EXPERIMENTAL=y
# CONFIG_CLEAN_COMPILE is not set
CONFIG_BROKEN=y
CONFIG_BROKEN_ON_SMP=y
CONFIG_LOCK_KERNEL=y
CONFIG_INIT_ENV_ARG_LIMIT=32
#
# General setup
#
CONFIG_LOCALVERSION=""
# CONFIG_LOCALVERSION_AUTO is not set
CONFIG_SWAP=y
CONFIG_SYSVIPC=y
# CONFIG_POSIX_MQUEUE is not set
# CONFIG_BSD_PROCESS_ACCT is not set
CONFIG_SYSCTL=y
# CONFIG_AUDIT is not set
# CONFIG_HOTPLUG is not set
# CONFIG_KOBJECT_UEVENT is not set
# CONFIG_IKCONFIG is not set
CONFIG_EMBEDDED=y
CONFIG_KALLSYMS=y
# CONFIG_KALLSYMS_ALL is not set
# CONFIG_KALLSYMS_EXTRA_PASS is not set
CONFIG_PRINTK=y
CONFIG_BUG=y
CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
CONFIG_EPOLL=y
# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
CONFIG_SHMEM=y
CONFIG_CC_ALIGN_FUNCTIONS=0
CONFIG_CC_ALIGN_LABELS=0
CONFIG_CC_ALIGN_LOOPS=0
CONFIG_CC_ALIGN_JUMPS=0
# CONFIG_TINY_SHMEM is not set
CONFIG_BASE_SMALL=0
#
# Loadable module support
#
CONFIG_MODULES=y
# CONFIG_MODULE_UNLOAD is not set
CONFIG_OBSOLETE_MODPARM=y
# CONFIG_MODVERSIONS is not set
# CONFIG_MODULE_SRCVERSION_ALL is not set
# CONFIG_KMOD is not set
#
# Processor type and features
#
CONFIG_X86_PC=y
# CONFIG_X86_ELAN is not set
# CONFIG_X86_VOYAGER is not set
# CONFIG_X86_NUMAQ is not set
# CONFIG_X86_SUMMIT is not set
# CONFIG_X86_BIGSMP is not set
# CONFIG_X86_VISWS is not set
# CONFIG_X86_GENERICARCH is not set
# CONFIG_X86_ES7000 is not set
# CONFIG_M386 is not set
# CONFIG_M486 is not set
# CONFIG_M586 is not set
# CONFIG_M586TSC is not set
# CONFIG_M586MMX is not set
# CONFIG_M686 is not set
# CONFIG_MPENTIUMII is not set
# CONFIG_MPENTIUMIII is not set
# CONFIG_MPENTIUMM is not set
# CONFIG_MPENTIUM4 is not set
# CONFIG_MK6 is not set
CONFIG_MK7=y
# CONFIG_MK8 is not set
# CONFIG_MCRUSOE is not set
# CONFIG_MEFFICEON is not set
# CONFIG_MWINCHIPC6 is not set
# CONFIG_MWINCHIP2 is not set
# CONFIG_MWINCHIP3D is not set
# CONFIG_MGEODEGX1 is not set
# CONFIG_MCYRIXIII is not set
# CONFIG_MVIAC3_2 is not set
# CONFIG_X86_GENERIC is not set
CONFIG_X86_CMPXCHG=y
CONFIG_X86_XADD=y
CONFIG_X86_L1_CACHE_SHIFT=6
CONFIG_RWSEM_XCHGADD_ALGORITHM=y
CONFIG_GENERIC_CALIBRATE_DELAY=y
CONFIG_X86_WP_WORKS_OK=y
CONFIG_X86_INVLPG=y
CONFIG_X86_BSWAP=y
CONFIG_X86_POPAD_OK=y
CONFIG_X86_GOOD_APIC=y
CONFIG_X86_INTEL_USERCOPY=y
CONFIG_X86_USE_PPRO_CHECKSUM=y
CONFIG_X86_USE_3DNOW=y
CONFIG_HPET_TIMER=y
# CONFIG_SMP is not set
CONFIG_PREEMPT=y
CONFIG_PREEMPT_BKL=y
CONFIG_X86_UP_APIC=y
CONFIG_X86_UP_IOAPIC=y
CONFIG_X86_LOCAL_APIC=y
CONFIG_X86_IO_APIC=y
CONFIG_X86_TSC=y
CONFIG_X86_MCE=y
CONFIG_X86_MCE_NONFATAL=y
# CONFIG_X86_MCE_P4THERMAL is not set
# CONFIG_TOSHIBA is not set
# CONFIG_I8K is not set
# CONFIG_MICROCODE is not set
# CONFIG_X86_MSR is not set
# CONFIG_X86_CPUID is not set
#
# Firmware Drivers
#
# CONFIG_EDD is not set
# CONFIG_NOHIGHMEM is not set
CONFIG_HIGHMEM4G=y
# CONFIG_HIGHMEM64G is not set
CONFIG_HIGHMEM=y
CONFIG_FLATMEM=y
# CONFIG_DISCONTIGMEM is not set
# CONFIG_HIGHPTE is not set
# CONFIG_MATH_EMULATION is not set
CONFIG_MTRR=y
# CONFIG_EFI is not set
CONFIG_HAVE_DEC_LOCK=y
CONFIG_REGPARM=y
CONFIG_SECCOMP=y
#
# Performance-monitoring counters support
#
# CONFIG_PERFCTR is not set
CONFIG_PHYSICAL_START=0x100000
CONFIG_KEXEC=y
CONFIG_CRASH_DUMP=y
#
# Power management options (ACPI, APM)
#
CONFIG_PM=y
# CONFIG_PM_DEBUG is not set
CONFIG_SOFTWARE_SUSPEND=y
CONFIG_PM_STD_PARTITION=""
#
# ACPI (Advanced Configuration and Power Interface) Support
#
CONFIG_ACPI=y
CONFIG_ACPI_BOOT=y
CONFIG_ACPI_INTERPRETER=y
CONFIG_ACPI_SLEEP=y
CONFIG_ACPI_SLEEP_PROC_FS=y
# CONFIG_ACPI_AC is not set
# CONFIG_ACPI_BATTERY is not set
# CONFIG_ACPI_BUTTON is not set
# CONFIG_ACPI_VIDEO is not set
# CONFIG_ACPI_HOTKEY is not set
# CONFIG_ACPI_FAN is not set
# CONFIG_ACPI_PROCESSOR is not set
# CONFIG_ACPI_ASUS is not set
# CONFIG_ACPI_IBM is not set
# CONFIG_ACPI_TOSHIBA is not set
CONFIG_ACPI_BLACKLIST_YEAR=0
CONFIG_ACPI_DEBUG=y
CONFIG_ACPI_BUS=y
CONFIG_ACPI_EC=y
CONFIG_ACPI_POWER=y
CONFIG_ACPI_PCI=y
CONFIG_ACPI_SYSTEM=y
# CONFIG_X86_PM_TIMER is not set
# CONFIG_ACPI_CONTAINER is not set
#
# APM (Advanced Power Management) BIOS Support
#
# CONFIG_APM is not set
#
# CPU Frequency scaling
#
# CONFIG_CPU_FREQ is not set
#
# Bus options (PCI, PCMCIA, EISA, MCA, ISA)
#
CONFIG_PCI=y
# CONFIG_PCI_GOBIOS is not set
# CONFIG_PCI_GOMMCONFIG is not set
# CONFIG_PCI_GODIRECT is not set
CONFIG_PCI_GOANY=y
CONFIG_PCI_BIOS=y
CONFIG_PCI_DIRECT=y
CONFIG_PCI_MMCONFIG=y
# CONFIG_PCIEPORTBUS is not set
# CONFIG_PCI_MSI is not set
# CONFIG_PCI_LEGACY_PROC is not set
CONFIG_PCI_NAMES=y
# CONFIG_PCI_DEBUG is not set
# CONFIG_ISA is not set
# CONFIG_MCA is not set
# CONFIG_SCx200 is not set
#
# PCCARD (PCMCIA/CardBus) support
#
# CONFIG_PCCARD is not set
#
# PCI Hotplug Support
#
# CONFIG_HOTPLUG_PCI is not set
#
# Executable file formats
#
CONFIG_BINFMT_ELF=y
# CONFIG_BINFMT_AOUT is not set
# CONFIG_BINFMT_MISC is not set
#
# Networking
#
CONFIG_NET=y
#
# Networking protocols
#
CONFIG_INET=y
# CONFIG_IP_MULTICAST is not set
# CONFIG_IP_ADVANCED_ROUTER is not set
# CONFIG_IP_PNP is not set
# CONFIG_NET_IPIP is not set
# CONFIG_NET_IPGRE is not set
# CONFIG_ARPD is not set
# CONFIG_SYN_COOKIES is not set
# CONFIG_INET_AH is not set
# CONFIG_INET_ESP is not set
# CONFIG_INET_IPCOMP is not set
# CONFIG_INET_TUNNEL is not set
CONFIG_IP_TCPDIAG=y
# CONFIG_IP_TCPDIAG_IPV6 is not set
# CONFIG_IPV6 is not set
# CONFIG_IP_SCTP is not set
# CONFIG_DECNET is not set
# CONFIG_LLC2 is not set
# CONFIG_IPX is not set
# CONFIG_ATALK is not set
# CONFIG_X25 is not set
# CONFIG_LAPB is not set
# CONFIG_ECONET is not set
#
# Network packet filtering
#
# CONFIG_NETFILTER is not set
#
# QoS and/or fair queueing
#
# CONFIG_NET_SCHED is not set
# CONFIG_NET_CLS_ROUTE is not set
# CONFIG_NET_KEY is not set
CONFIG_PACKET=y
CONFIG_PACKET_MMAP=y
CONFIG_UNIX=y
# CONFIG_BRIDGE is not set
# CONFIG_VLAN_8021Q is not set
# CONFIG_WAN_ROUTER is not set
#
# Amateur Radio support
#
# CONFIG_HAMRADIO is not set
#
# IrDA (infrared) subsystem support
#
# CONFIG_IRDA is not set
#
# Bluetooth subsystem support
#
# CONFIG_BT is not set
# CONFIG_IEEE80211 is not set
#
# Asynchronous Transfer Mode (ATM)
#
# CONFIG_ATM is not set
#
# Network testing
#
# CONFIG_NET_DIVERT is not set
# CONFIG_NET_PKTGEN is not set
# CONFIG_KGDBOE is not set
CONFIG_NETPOLL=y
# CONFIG_NETPOLL_RX is not set
# CONFIG_NETPOLL_TRAP is not set
CONFIG_NET_POLL_CONTROLLER=y
#
# Device Drivers
#
#
# Generic Driver Options
#
CONFIG_STANDALONE=y
# CONFIG_PREVENT_FIRMWARE_BUILD is not set
# CONFIG_FW_LOADER is not set
# CONFIG_DEBUG_DRIVER is not set
#
# Memory Technology Devices (MTD)
#
# CONFIG_MTD is not set
#
# Parallel port support
#
# CONFIG_PARPORT is not set
#
# Plug and Play support
#
# CONFIG_PNP is not set
#
# Block devices
#
# CONFIG_BLK_DEV_FD is not set
# CONFIG_BLK_CPQ_DA is not set
# CONFIG_BLK_CPQ_CISS_DA is not set
# CONFIG_BLK_DEV_DAC960 is not set
# CONFIG_BLK_DEV_UMEM is not set
# CONFIG_BLK_DEV_COW_COMMON is not set
# CONFIG_BLK_DEV_LOOP is not set
# CONFIG_BLK_DEV_NBD is not set
# CONFIG_BLK_DEV_SX8 is not set
# CONFIG_BLK_DEV_RAM is not set
CONFIG_BLK_DEV_RAM_COUNT=16
CONFIG_INITRAMFS_SOURCE=""
# CONFIG_LBD is not set
# CONFIG_CDROM_PKTCDVD is not set
#
# IO Schedulers
#
CONFIG_IOSCHED_NOOP=y
CONFIG_IOSCHED_AS=y
CONFIG_IOSCHED_DEADLINE=y
CONFIG_IOSCHED_CFQ=y
# CONFIG_ATA_OVER_ETH is not set
#
# ATA/ATAPI/MFM/RLL support
#
CONFIG_IDE=y
CONFIG_BLK_DEV_IDE=y
#
# Please see Documentation/ide.txt for help/info on IDE drives
#
# CONFIG_BLK_DEV_IDE_SATA is not set
# CONFIG_BLK_DEV_HD_IDE is not set
CONFIG_BLK_DEV_IDEDISK=y
CONFIG_IDEDISK_MULTI_MODE=y
# CONFIG_BLK_DEV_IDECD is not set
# CONFIG_BLK_DEV_IDETAPE is not set
# CONFIG_BLK_DEV_IDEFLOPPY is not set
# CONFIG_IDE_TASK_IOCTL is not set
#
# IDE chipset support/bugfixes
#
CONFIG_IDE_GENERIC=y
# CONFIG_BLK_DEV_CMD640 is not set
CONFIG_BLK_DEV_IDEPCI=y
CONFIG_IDEPCI_SHARE_IRQ=y
# CONFIG_BLK_DEV_OFFBOARD is not set
# CONFIG_BLK_DEV_GENERIC is not set
# CONFIG_BLK_DEV_OPTI621 is not set
# CONFIG_BLK_DEV_RZ1000 is not set
CONFIG_BLK_DEV_IDEDMA_PCI=y
# CONFIG_BLK_DEV_IDEDMA_FORCED is not set
CONFIG_IDEDMA_PCI_AUTO=y
# CONFIG_IDEDMA_ONLYDISK is not set
# CONFIG_BLK_DEV_AEC62XX is not set
# CONFIG_BLK_DEV_ALI15X3 is not set
# CONFIG_BLK_DEV_AMD74XX is not set
# CONFIG_BLK_DEV_ATIIXP is not set
# CONFIG_BLK_DEV_CMD64X is not set
# CONFIG_BLK_DEV_TRIFLEX is not set
# CONFIG_BLK_DEV_CY82C693 is not set
# CONFIG_BLK_DEV_CS5520 is not set
# CONFIG_BLK_DEV_CS5530 is not set
# CONFIG_BLK_DEV_HPT34X is not set
CONFIG_BLK_DEV_HPT366=y
# CONFIG_BLK_DEV_SC1200 is not set
# CONFIG_BLK_DEV_PIIX is not set
# CONFIG_BLK_DEV_NS87415 is not set
# CONFIG_BLK_DEV_PDC202XX_OLD is not set
# CONFIG_BLK_DEV_PDC202XX_NEW is not set
# CONFIG_BLK_DEV_SVWKS is not set
# CONFIG_BLK_DEV_SIIMAGE is not set
# CONFIG_BLK_DEV_SIS5513 is not set
# CONFIG_BLK_DEV_SLC90E66 is not set
# CONFIG_BLK_DEV_TRM290 is not set
CONFIG_BLK_DEV_VIA82CXXX=y
# CONFIG_IDE_ARM is not set
CONFIG_BLK_DEV_IDEDMA=y
# CONFIG_IDEDMA_IVB is not set
CONFIG_IDEDMA_AUTO=y
# CONFIG_BLK_DEV_HD is not set
#
# SCSI device support
#
# CONFIG_SCSI is not set
#
# Multi-device support (RAID and LVM)
#
# CONFIG_MD is not set
#
# Fusion MPT device support
#
#
# IEEE 1394 (FireWire) support
#
# CONFIG_IEEE1394 is not set
#
# I2O device support
#
# CONFIG_I2O is not set
#
# Network device support
#
CONFIG_NETDEVICES=y
# CONFIG_DUMMY is not set
# CONFIG_BONDING is not set
# CONFIG_EQUALIZER is not set
CONFIG_TUN=y
#
# ARCnet devices
#
# CONFIG_ARCNET is not set
#
# Ethernet (10 or 100Mbit)
#
CONFIG_NET_ETHERNET=y
CONFIG_MII=y
# CONFIG_HAPPYMEAL is not set
# CONFIG_SUNGEM is not set
CONFIG_NET_VENDOR_3COM=y
CONFIG_VORTEX=y
# CONFIG_TYPHOON is not set
#
# Tulip family network device support
#
CONFIG_NET_TULIP=y
# CONFIG_DE2104X is not set
CONFIG_TULIP=y
# CONFIG_TULIP_MWI is not set
# CONFIG_TULIP_MMIO is not set
# CONFIG_TULIP_NAPI is not set
# CONFIG_DE4X5 is not set
# CONFIG_WINBOND_840 is not set
# CONFIG_DM9102 is not set
# CONFIG_HP100 is not set
CONFIG_NET_PCI=y
# CONFIG_PCNET32 is not set
# CONFIG_AMD8111_ETH is not set
# CONFIG_ADAPTEC_STARFIRE is not set
# CONFIG_B44 is not set
# CONFIG_FORCEDETH is not set
# CONFIG_DGRS is not set
# CONFIG_EEPRO100 is not set
CONFIG_E100=y
# CONFIG_FEALNX is not set
# CONFIG_NATSEMI is not set
# CONFIG_NE2K_PCI is not set
# CONFIG_8139CP is not set
# CONFIG_8139TOO is not set
# CONFIG_SIS900 is not set
# CONFIG_EPIC100 is not set
# CONFIG_SUNDANCE is not set
# CONFIG_TLAN is not set
CONFIG_VIA_RHINE=y
# CONFIG_VIA_RHINE_MMIO is not set
#
# Ethernet (1000 Mbit)
#
# CONFIG_ACENIC is not set
# CONFIG_DL2K is not set
# CONFIG_E1000 is not set
# CONFIG_NS83820 is not set
# CONFIG_HAMACHI is not set
# CONFIG_YELLOWFIN is not set
# CONFIG_R8169 is not set
# CONFIG_SKGE is not set
# CONFIG_SK98LIN is not set
# CONFIG_VIA_VELOCITY is not set
# CONFIG_TIGON3 is not set
#
# Ethernet (10000 Mbit)
#
# CONFIG_CHELSIO_T1 is not set
# CONFIG_IXGB is not set
# CONFIG_S2IO is not set
#
# Token Ring devices
#
# CONFIG_TR is not set
#
# Wireless LAN (non-hamradio)
#
# CONFIG_NET_RADIO is not set
#
# Wan interfaces
#
# CONFIG_WAN is not set
# CONFIG_FDDI is not set
# CONFIG_HIPPI is not set
# CONFIG_PPP is not set
# CONFIG_SLIP is not set
# CONFIG_SHAPER is not set
CONFIG_NETCONSOLE=y
#
# ISDN subsystem
#
# CONFIG_ISDN is not set
#
# Telephony Support
#
# CONFIG_PHONE is not set
#
# Input device support
#
CONFIG_INPUT=y
#
# Userland interfaces
#
CONFIG_INPUT_MOUSEDEV=y
# CONFIG_INPUT_MOUSEDEV_PSAUX is not set
CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
# CONFIG_INPUT_JOYDEV is not set
# CONFIG_INPUT_TSDEV is not set
# CONFIG_INPUT_EVDEV is not set
# CONFIG_INPUT_EVBUG is not set
#
# Input Device Drivers
#
CONFIG_INPUT_KEYBOARD=y
CONFIG_KEYBOARD_ATKBD=y
# CONFIG_KEYBOARD_SUNKBD is not set
# CONFIG_KEYBOARD_LKKBD is not set
# CONFIG_KEYBOARD_XTKBD is not set
# CONFIG_KEYBOARD_NEWTON is not set
# CONFIG_INPUT_MOUSE is not set
# CONFIG_INPUT_JOYSTICK is not set
# CONFIG_INPUT_TOUCHSCREEN is not set
# CONFIG_INPUT_MISC is not set
#
# Hardware I/O ports
#
CONFIG_SERIO=y
CONFIG_SERIO_I8042=y
# CONFIG_SERIO_SERPORT is not set
# CONFIG_SERIO_CT82C710 is not set
# CONFIG_SERIO_PCIPS2 is not set
CONFIG_SERIO_LIBPS2=y
# CONFIG_SERIO_RAW is not set
# CONFIG_GAMEPORT is not set
#
# Character devices
#
CONFIG_VT=y
CONFIG_VT_CONSOLE=y
CONFIG_HW_CONSOLE=y
# CONFIG_SERIAL_NONSTANDARD is not set
#
# Serial drivers
#
CONFIG_SERIAL_8250=y
CONFIG_SERIAL_8250_CONSOLE=y
# CONFIG_SERIAL_8250_ACPI is not set
CONFIG_SERIAL_8250_NR_UARTS=4
# CONFIG_SERIAL_8250_EXTENDED is not set
#
# Non-8250 serial port support
#
CONFIG_SERIAL_CORE=y
CONFIG_SERIAL_CORE_CONSOLE=y
# CONFIG_SERIAL_JSM is not set
CONFIG_UNIX98_PTYS=y
# CONFIG_LEGACY_PTYS is not set
#
# IPMI
#
# CONFIG_IPMI_HANDLER is not set
#
# Watchdog Cards
#
# CONFIG_WATCHDOG is not set
# CONFIG_HW_RANDOM is not set
# CONFIG_NVRAM is not set
# CONFIG_RTC is not set
# CONFIG_GEN_RTC is not set
# CONFIG_DTLK is not set
# CONFIG_R3964 is not set
# CONFIG_APPLICOM is not set
# CONFIG_SONYPI is not set
#
# Ftape, the floppy tape device driver
#
# CONFIG_FTAPE is not set
# CONFIG_AGP is not set
# CONFIG_DRM is not set
# CONFIG_MWAVE is not set
# CONFIG_RAW_DRIVER is not set
# CONFIG_HPET is not set
# CONFIG_HANGCHECK_TIMER is not set
#
# TPM devices
#
# CONFIG_TCG_TPM is not set
#
# I2C support
#
# CONFIG_I2C is not set
#
# Dallas's 1-wire bus
#
# CONFIG_W1 is not set
#
# Misc devices
#
# CONFIG_IBM_ASM is not set
#
# Multimedia devices
#
# CONFIG_VIDEO_DEV is not set
#
# Digital Video Broadcasting Devices
#
# CONFIG_DVB is not set
#
# Graphics support
#
# CONFIG_FB is not set
# CONFIG_VIDEO_SELECT is not set
#
# Console display driver support
#
CONFIG_VGA_CONSOLE=y
CONFIG_DUMMY_CONSOLE=y
#
# Sound
#
# CONFIG_SOUND is not set
#
# USB support
#
CONFIG_USB_ARCH_HAS_HCD=y
CONFIG_USB_ARCH_HAS_OHCI=y
# CONFIG_USB is not set
#
# USB Gadget Support
#
# CONFIG_USB_GADGET is not set
#
# MMC/SD Card support
#
# CONFIG_MMC is not set
#
# InfiniBand support
#
# CONFIG_INFINIBAND is not set
#
# File systems
#
# CONFIG_EXT2_FS is not set
CONFIG_EXT3_FS=y
# CONFIG_EXT3_FS_XATTR is not set
CONFIG_JBD=y
# CONFIG_JBD_DEBUG is not set
# CONFIG_REISERFS_FS is not set
# CONFIG_JFS_FS is not set
#
# XFS support
#
# CONFIG_XFS_FS is not set
# CONFIG_MINIX_FS is not set
# CONFIG_ROMFS_FS is not set
# CONFIG_INOTIFY is not set
# CONFIG_QUOTA is not set
# CONFIG_DNOTIFY is not set
# CONFIG_AUTOFS_FS is not set
# CONFIG_AUTOFS4_FS is not set
#
# Caches
#
# CONFIG_FSCACHE is not set
# CONFIG_FUSE_FS is not set
#
# CD-ROM/DVD Filesystems
#
# CONFIG_ISO9660_FS is not set
# CONFIG_UDF_FS is not set
#
# DOS/FAT/NT Filesystems
#
# CONFIG_MSDOS_FS is not set
# CONFIG_VFAT_FS is not set
# CONFIG_NTFS_FS is not set
#
# Pseudo filesystems
#
CONFIG_PROC_FS=y
CONFIG_PROC_KCORE=y
# CONFIG_PROC_VMCORE is not set
CONFIG_SYSFS=y
# CONFIG_DEVFS_FS is not set
# CONFIG_DEVPTS_FS_XATTR is not set
CONFIG_TMPFS=y
# CONFIG_TMPFS_XATTR is not set
# CONFIG_HUGETLBFS is not set
# CONFIG_HUGETLB_PAGE is not set
CONFIG_RAMFS=y
# CONFIG_RELAYFS_FS is not set
#
# Miscellaneous filesystems
#
# CONFIG_ADFS_FS is not set
# CONFIG_AFFS_FS is not set
# CONFIG_HFS_FS is not set
# CONFIG_HFSPLUS_FS is not set
# CONFIG_BEFS_FS is not set
# CONFIG_BFS_FS is not set
# CONFIG_EFS_FS is not set
# CONFIG_CRAMFS is not set
# CONFIG_VXFS_FS is not set
# CONFIG_HPFS_FS is not set
# CONFIG_QNX4FS_FS is not set
# CONFIG_SYSV_FS is not set
# CONFIG_UFS_FS is not set
#
# Network File Systems
#
# CONFIG_NFS_FS is not set
# CONFIG_NFSD is not set
# CONFIG_SMB_FS is not set
# CONFIG_CIFS is not set
# CONFIG_NCP_FS is not set
# CONFIG_CODA_FS is not set
# CONFIG_AFS_FS is not set
#
# Partition Types
#
# CONFIG_PARTITION_ADVANCED is not set
CONFIG_MSDOS_PARTITION=y
#
# Native Language Support
#
# CONFIG_NLS is not set
#
# Profiling support
#
CONFIG_PROFILING=y
CONFIG_OPROFILE=y
#
# Kernel hacking
#
# CONFIG_PRINTK_TIME is not set
CONFIG_DEBUG_KERNEL=y
CONFIG_MAGIC_SYSRQ=y
CONFIG_LOG_BUF_SHIFT=16
CONFIG_DETECT_SOFTLOCKUP=y
# CONFIG_SCHEDSTATS is not set
CONFIG_DEBUG_SLAB=y
CONFIG_DEBUG_PREEMPT=y
# CONFIG_DEBUG_SPINLOCK is not set
# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
# CONFIG_DEBUG_KOBJECT is not set
# CONFIG_DEBUG_HIGHMEM is not set
# CONFIG_DEBUG_BUGVERBOSE is not set
CONFIG_DEBUG_INFO=y
# CONFIG_PAGE_OWNER is not set
# CONFIG_DEBUG_FS is not set
CONFIG_FRAME_POINTER=y
CONFIG_EARLY_PRINTK=y
CONFIG_DEBUG_STACKOVERFLOW=y
# CONFIG_KPROBES is not set
# CONFIG_DEBUG_STACK_USAGE is not set
#
# Page alloc debug is incompatible with Software Suspend on i386
#
CONFIG_4KSTACKS=y
CONFIG_X86_FIND_SMP_CONFIG=y
CONFIG_X86_MPPARSE=y
# CONFIG_KGDB is not set
#
# Security options
#
# CONFIG_KEYS is not set
# CONFIG_SECURITY is not set
#
# Cryptographic options
#
CONFIG_CRYPTO=y
# CONFIG_CRYPTO_HMAC is not set
# CONFIG_CRYPTO_NULL is not set
# CONFIG_CRYPTO_MD4 is not set
CONFIG_CRYPTO_MD5=y
# CONFIG_CRYPTO_SHA1 is not set
# CONFIG_CRYPTO_SHA256 is not set
# CONFIG_CRYPTO_SHA512 is not set
# CONFIG_CRYPTO_WP512 is not set
# CONFIG_CRYPTO_TGR192 is not set
CONFIG_CRYPTO_DES=y
# CONFIG_CRYPTO_BLOWFISH is not set
# CONFIG_CRYPTO_TWOFISH is not set
# CONFIG_CRYPTO_SERPENT is not set
CONFIG_CRYPTO_AES_586=y
# CONFIG_CRYPTO_CAST5 is not set
# CONFIG_CRYPTO_CAST6 is not set
# CONFIG_CRYPTO_TEA is not set
# CONFIG_CRYPTO_ARC4 is not set
# CONFIG_CRYPTO_KHAZAD is not set
# CONFIG_CRYPTO_ANUBIS is not set
# CONFIG_CRYPTO_DEFLATE is not set
# CONFIG_CRYPTO_MICHAEL_MIC is not set
# CONFIG_CRYPTO_CRC32C is not set
# CONFIG_CRYPTO_TEST is not set
#
# Hardware crypto devices
#
# CONFIG_CRYPTO_DEV_PADLOCK is not set
#
# Library routines
#
# CONFIG_CRC_CCITT is not set
CONFIG_CRC32=y
# CONFIG_LIBCRC32C is not set
CONFIG_GENERIC_HARDIRQS=y
CONFIG_GENERIC_IRQ_PROBE=y
CONFIG_X86_BIOS_REBOOT=y
^ permalink raw reply [flat|nested] 27+ messages in thread
* Re: Re: 2.6.12-rc2-mm2
[not found] ` <1113054188.2364.23.camel-bi+AKbBUZKY6gyzm1THtWbp2dZbC/Bob@public.gmane.org>
@ 2005-04-09 17:22 ` =?gb18030?q?Ois=A8=AAn_Mac_Fheara=A8=AA?=
2005-05-26 5:07 ` 2.6.12-rc2-mm2 Andrew Morton
1 sibling, 0 replies; 27+ messages in thread
From: =?gb18030?q?Ois=A8=AAn_Mac_Fheara=A8=AA?= @ 2005-04-09 17:22 UTC (permalink / raw)
To: Alexander Nyberg, acpi-devel-5NWGOfrQmneRv+LV9MX5uipxlwaOVQ5f
[-- Warning: decoded text below may be mangled, UTF-8 assumed --]
[-- Attachment #1: Type: text/plain; charset="gb18030", Size: 1088 bytes --]
On Saturday 09 April 2005 14:43, you wrote:
...
> few times shows it mostly sits in in acpi_ut_find_allocation+0x2b/0x37.
...
> <acpi_ut_find_allocation+24>: mov 0xc03c1040(%eax),%eax 0xc01daa4b
> <acpi_ut_find_allocation+30>: test %eax,%eax
...
> 0xc01daa4f <acpi_ut_find_allocation+34>: cmp %esi,%eax
> 0xc01daa51 <acpi_ut_find_allocation+36>: mov %eax,%edx
> 0xc01daa53 <acpi_ut_find_allocation+38>: je 0xc01daa5e
> <acpi_ut_find_allocation+49>
That's odd - the instruction alignment doesn't seem to follow for those
numbers...
Also ebp isn't popped back at the end, unless there's something missing :)
Then again, I don't know much about practical coding on intel architecture and
even less about gdb's behaviour.
Ois¨ªn
-------------------------------------------------------
SF email is sponsored by - The IT Product Guide
Read honest & candid reviews on hundreds of IT Products from real users.
Discover which products truly live up to the hype. Start reading now.
http://ads.osdn.com/?ad_id=6595&alloc_id=14396&op=click
^ permalink raw reply [flat|nested] 27+ messages in thread
* Re: 2.6.12-rc2-mm2
2005-04-08 10:08 2.6.12-rc2-mm2 Andrew Morton
` (7 preceding siblings ...)
[not found] ` <20050408030835.4941cd98.akpm-3NddpPZAyC0@public.gmane.org>
@ 2005-04-10 13:31 ` Alexander Nyberg
2005-04-10 22:48 ` 2.6.12-rc2-mm2 Adrian Bunk
9 siblings, 0 replies; 27+ messages in thread
From: Alexander Nyberg @ 2005-04-10 13:31 UTC (permalink / raw)
To: Andrew Morton; +Cc: linux-kernel, pavel
> - Largeish x86_64 update
Hi Pavel
I'm playing a bit with suspend on smp, we need something like this:
As the cpu-mask is set to only this cpu _smp_processor_id() is safe.
Index: linux-2.6.11/kernel/power/smp.c
===================================================================
--- linux-2.6.11.orig/kernel/power/smp.c 2005-04-10 09:43:13.000000000 +0200
+++ linux-2.6.11/kernel/power/smp.c 2005-04-10 15:23:36.000000000 +0200
@@ -46,13 +46,13 @@
void disable_nonboot_cpus(void)
{
- printk("Freezing CPUs (at %d)", smp_processor_id());
oldmask = current->cpus_allowed;
set_cpus_allowed(current, cpumask_of_cpu(0));
+ printk("Freezing CPUs (at %d)", _smp_processor_id());
current->state = TASK_INTERRUPTIBLE;
schedule_timeout(HZ);
printk("...");
- BUG_ON(smp_processor_id() != 0);
+ BUG_ON(_smp_processor_id() != 0);
/* FIXME: for this to work, all the CPUs must be running
* "idle" thread (or we deadlock). Is that guaranteed? */
^ permalink raw reply [flat|nested] 27+ messages in thread
* Re: 2.6.12-rc2-mm2
@ 2005-04-10 15:06 Pavel Machek
0 siblings, 0 replies; 27+ messages in thread
From: Pavel Machek @ 2005-04-10 15:06 UTC (permalink / raw)
To: alexn, akpm; +Cc: linux-kernel, pavel
Hi! The patch is ok, but this should be rewriten to use cpu hotplug instead. I have some patches but they need more testing. --p
-- pavel. Sent from mobile phone. Sorry for poor formatting.
^ permalink raw reply [flat|nested] 27+ messages in thread
* Re: 2.6.12-rc2-mm2
2005-04-08 10:08 2.6.12-rc2-mm2 Andrew Morton
` (8 preceding siblings ...)
2005-04-10 13:31 ` 2.6.12-rc2-mm2 Alexander Nyberg
@ 2005-04-10 22:48 ` Adrian Bunk
2005-04-11 15:18 ` 2.6.12-rc2-mm2 Paul E. McKenney
9 siblings, 1 reply; 27+ messages in thread
From: Adrian Bunk @ 2005-04-10 22:48 UTC (permalink / raw)
To: Andrew Morton; +Cc: linux-kernel, Paul E. McKenney
kernel-rcupdatec-make-the-exports-export_symbol_gpl.patch
add-deprecated_for_modules.patch
add-deprecated_for_modules-fix.patch
deprecate-synchronize_kernel-gpl-replacement.patch
deprecate-synchronize_kernel-gpl-replacement-fix.patch
change-synchronize_kernel-to-_rcu-and-_sched.patch
Please drop these patches.
Using these symbols in non-GPL modules is a legal problem at least in
the USA except for IBM, and all we've heard from IBM is that they are
not 100% sure that there is really no binary-only module by IBM that
might use these symbols.
The risk of anyne using them only increases (no matter that it's marked
as deprecated) as long as it's available - and nobody has until now
claimed that he's actually using one pf them in a binary-only module.
cu
Adrian
--
"Is there not promise of rain?" Ling Tan asked suddenly out
of the darkness. There had been need of rain for many days.
"Only a promise," Lao Er said.
Pearl S. Buck - Dragon Seed
^ permalink raw reply [flat|nested] 27+ messages in thread
* Re: 2.6.12-rc2-mm2
2005-04-10 22:48 ` 2.6.12-rc2-mm2 Adrian Bunk
@ 2005-04-11 15:18 ` Paul E. McKenney
2005-04-13 0:36 ` 2.6.12-rc2-mm2 Adrian Bunk
0 siblings, 1 reply; 27+ messages in thread
From: Paul E. McKenney @ 2005-04-11 15:18 UTC (permalink / raw)
To: Adrian Bunk; +Cc: Andrew Morton, linux-kernel
On Mon, Apr 11, 2005 at 12:48:34AM +0200, Adrian Bunk wrote:
> kernel-rcupdatec-make-the-exports-export_symbol_gpl.patch
> add-deprecated_for_modules.patch
> add-deprecated_for_modules-fix.patch
> deprecate-synchronize_kernel-gpl-replacement.patch
> deprecate-synchronize_kernel-gpl-replacement-fix.patch
> change-synchronize_kernel-to-_rcu-and-_sched.patch
>
>
> Please drop these patches.
Please keep them!
> Using these symbols in non-GPL modules is a legal problem at least in
> the USA except for IBM,
Again, based on what line of reasoning? Again, the obvious lines
of reasoning do not apply.
> and all we've heard from IBM is that they are
> not 100% sure that there is really no binary-only module by IBM that
> might use these symbols.
>From my earlier message (http://lkml.org/lkml/2005/4/4/244):
Agreed, in that I know of no binary module that uses RCU. However,
I cannot -prove- that there is no such module.
IOW, I am also not 100% sure that there is really no binary-only module
using these symbols by -anyone-, including someone -other- than IBM.
In addition, I know of no way that -anyone- could possibly be 100% sure
that there is really no binary-only module using symbols. Hence the
approach of providing the year "grace period" before transitioning to
EXPORT_SYMBOL_GPL().
> The risk of anyne using them only increases (no matter that it's marked
> as deprecated) as long as it's available - and nobody has until now
> claimed that he's actually using one pf them in a binary-only module.
I am not convinced that the risk of usage increases significantly.
However, even if someone does start using them in a binary module, they
will have been warned. Yes, someone could possibly ignore the warning.
They -still- will have been warned, so that any "damage" would be
self-inflicted. Therefore, as noted earlier, the symbol transitions
to EXPORT_SYMBOL_GPL() one year after its inclusion, regardless of any
people who ignored warnings.
Thanx, Paul
> cu
> Adrian
>
> --
>
> "Is there not promise of rain?" Ling Tan asked suddenly out
> of the darkness. There had been need of rain for many days.
> "Only a promise," Lao Er said.
> Pearl S. Buck - Dragon Seed
>
>
>
^ permalink raw reply [flat|nested] 27+ messages in thread
* Re: 2.6.12-rc2-mm2
2005-04-11 15:18 ` 2.6.12-rc2-mm2 Paul E. McKenney
@ 2005-04-13 0:36 ` Adrian Bunk
2005-04-13 1:32 ` 2.6.12-rc2-mm2 Paul E. McKenney
0 siblings, 1 reply; 27+ messages in thread
From: Adrian Bunk @ 2005-04-13 0:36 UTC (permalink / raw)
To: Paul E. McKenney; +Cc: Andrew Morton, linux-kernel
On Mon, Apr 11, 2005 at 08:18:32AM -0700, Paul E. McKenney wrote:
> On Mon, Apr 11, 2005 at 12:48:34AM +0200, Adrian Bunk wrote:
> > kernel-rcupdatec-make-the-exports-export_symbol_gpl.patch
> > add-deprecated_for_modules.patch
> > add-deprecated_for_modules-fix.patch
> > deprecate-synchronize_kernel-gpl-replacement.patch
> > deprecate-synchronize_kernel-gpl-replacement-fix.patch
> > change-synchronize_kernel-to-_rcu-and-_sched.patch
> >
> >
> > Please drop these patches.
>
> Please keep them!
>
> > Using these symbols in non-GPL modules is a legal problem at least in
> > the USA except for IBM,
>
> Again, based on what line of reasoning? Again, the obvious lines
> of reasoning do not apply.
Shouldn't the IBM patents be enough reason to prevent everyone except
IBM from using RCU in non-GPL modules?
> > and all we've heard from IBM is that they are
> > not 100% sure that there is really no binary-only module by IBM that
> > might use these symbols.
>
> >From my earlier message (http://lkml.org/lkml/2005/4/4/244):
>
> Agreed, in that I know of no binary module that uses RCU. However,
> I cannot -prove- that there is no such module.
>
> IOW, I am also not 100% sure that there is really no binary-only module
> using these symbols by -anyone-, including someone -other- than IBM.
> In addition, I know of no way that -anyone- could possibly be 100% sure
> that there is really no binary-only module using symbols. Hence the
> approach of providing the year "grace period" before transitioning to
> EXPORT_SYMBOL_GPL().
>...
If kernel development was based on the assumption that every change that
might break binary-only modules would need a one year "grace period", it
was much different from how it's today...
> Thanx, Paul
cu
Adrian
--
"Is there not promise of rain?" Ling Tan asked suddenly out
of the darkness. There had been need of rain for many days.
"Only a promise," Lao Er said.
Pearl S. Buck - Dragon Seed
^ permalink raw reply [flat|nested] 27+ messages in thread
* Re: 2.6.12-rc2-mm2
2005-04-13 0:36 ` 2.6.12-rc2-mm2 Adrian Bunk
@ 2005-04-13 1:32 ` Paul E. McKenney
0 siblings, 0 replies; 27+ messages in thread
From: Paul E. McKenney @ 2005-04-13 1:32 UTC (permalink / raw)
To: Adrian Bunk; +Cc: Andrew Morton, linux-kernel
On Wed, Apr 13, 2005 at 02:36:04AM +0200, Adrian Bunk wrote:
> On Mon, Apr 11, 2005 at 08:18:32AM -0700, Paul E. McKenney wrote:
> > On Mon, Apr 11, 2005 at 12:48:34AM +0200, Adrian Bunk wrote:
> > > kernel-rcupdatec-make-the-exports-export_symbol_gpl.patch
> > > add-deprecated_for_modules.patch
> > > add-deprecated_for_modules-fix.patch
> > > deprecate-synchronize_kernel-gpl-replacement.patch
> > > deprecate-synchronize_kernel-gpl-replacement-fix.patch
> > > change-synchronize_kernel-to-_rcu-and-_sched.patch
> > >
> > >
> > > Please drop these patches.
> >
> > Please keep them!
> >
> > > Using these symbols in non-GPL modules is a legal problem at least in
> > > the USA except for IBM,
> >
> > Again, based on what line of reasoning? Again, the obvious lines
> > of reasoning do not apply.
>
> Shouldn't the IBM patents be enough reason to prevent everyone except
> IBM from using RCU in non-GPL modules?
Not necessarily, at least according to the lawyers that I talk to.
> > > and all we've heard from IBM is that they are
> > > not 100% sure that there is really no binary-only module by IBM that
> > > might use these symbols.
> >
> > >From my earlier message (http://lkml.org/lkml/2005/4/4/244):
> >
> > Agreed, in that I know of no binary module that uses RCU. However,
> > I cannot -prove- that there is no such module.
> >
> > IOW, I am also not 100% sure that there is really no binary-only module
> > using these symbols by -anyone-, including someone -other- than IBM.
> > In addition, I know of no way that -anyone- could possibly be 100% sure
> > that there is really no binary-only module using symbols. Hence the
> > approach of providing the year "grace period" before transitioning to
> > EXPORT_SYMBOL_GPL().
> >...
>
> If kernel development was based on the assumption that every change that
> might break binary-only modules would need a one year "grace period", it
> was much different from how it's today...
This is not "every change", but a specific change, and a rather unusual
one at that.
Thanx, Paul
> cu
> Adrian
>
> --
>
> "Is there not promise of rain?" Ling Tan asked suddenly out
> of the darkness. There had been need of rain for many days.
> "Only a promise," Lao Er said.
> Pearl S. Buck - Dragon Seed
>
>
^ permalink raw reply [flat|nested] 27+ messages in thread
* Re: 2.6.12-rc2-mm2
[not found] ` <1113054188.2364.23.camel-bi+AKbBUZKY6gyzm1THtWbp2dZbC/Bob@public.gmane.org>
2005-04-09 17:22 ` 2.6.12-rc2-mm2 =?gb18030?q?Ois=A8=AAn_Mac_Fheara=A8=AA?=
@ 2005-05-26 5:07 ` Andrew Morton
1 sibling, 0 replies; 27+ messages in thread
From: Andrew Morton @ 2005-05-26 5:07 UTC (permalink / raw)
To: Alexander Nyberg; +Cc: acpi-devel-5NWGOfrQmneRv+LV9MX5uipxlwaOVQ5f
Alexander Nyberg <alexn-auIyqT/O9BSzQB+pC5nmwQ@public.gmane.org> wrote:
>
> > ftp://ftp.kernel.org/pub/linux/kernel/people/akpm/patches/2.6/2.6.12-rc2/2.6.12-rc2-mm2/
> >
> > Changes since 2.6.12-rc2-mm1:
> >
> >
> > bk-acpi.patch
>
> [acpi-devel up on cc]
>
>
> One of my boxen takes about 5 minutes to reboot now, hitting sysrq-p a
> few times shows it mostly sits in in acpi_ut_find_allocation+0x2b/0x37.
> Reverting bk-acpi.patch makes it reboot like normal, config attached.
did this get fixed?
>
> (gdb) disass acpi_ut_find_allocation
> Dump of assembler code for function acpi_ut_find_allocation:
> 0xc01daa2d <acpi_ut_find_allocation+0>: push %ebp
> 0xc01daa2e <acpi_ut_find_allocation+1>: mov %esp,%ebp
> 0xc01daa30 <acpi_ut_find_allocation+3>: push %esi
> 0xc01daa31 <acpi_ut_find_allocation+4>: mov %edx,%esi
> 0xc01daa33 <acpi_ut_find_allocation+6>: push %ebx
> 0xc01daa34 <acpi_ut_find_allocation+7>: mov %eax,%ebx
> 0xc01daa36 <acpi_ut_find_allocation+9>: call 0xc01dae66 <acpi_ut_track_stack_ptr>
> 0xc01daa3b <acpi_ut_find_allocation+14>: xor %edx,%edx
> 0xc01daa3d <acpi_ut_find_allocation+16>: cmp $0x6,%ebx
> 0xc01daa40 <acpi_ut_find_allocation+19>: ja 0xc01daa5e <acpi_ut_find_allocation+49>
> 0xc01daa42 <acpi_ut_find_allocation+21>: imul $0x24,%ebx,%eax
> 0xc01daa45 <acpi_ut_find_allocation+24>: mov 0xc03c1040(%eax),%eax
> 0xc01daa4b <acpi_ut_find_allocation+30>: test %eax,%eax
> 0xc01daa4d <acpi_ut_find_allocation+32>: je 0xc01daa5c <acpi_ut_find_allocation+47>
> 0xc01daa4f <acpi_ut_find_allocation+34>: cmp %esi,%eax
> 0xc01daa51 <acpi_ut_find_allocation+36>: mov %eax,%edx
> 0xc01daa53 <acpi_ut_find_allocation+38>: je 0xc01daa5e <acpi_ut_find_allocation+49>
> 0xc01daa55 <acpi_ut_find_allocation+40>: mov 0x4(%eax),%eax
> 0xc01daa58 <acpi_ut_find_allocation+43>: test %eax,%eax
> 0xc01daa5a <acpi_ut_find_allocation+45>: jne 0xc01daa4f <acpi_ut_find_allocation+34>
> 0xc01daa5c <acpi_ut_find_allocation+47>: xor %edx,%edx
> 0xc01daa5e <acpi_ut_find_allocation+49>: pop %ebx
> 0xc01daa5f <acpi_ut_find_allocation+50>: pop %esi
> 0xc01daa60 <acpi_ut_find_allocation+51>: mov %edx,%eax
> 0xc01daa62 <acpi_ut_find_allocation+53>: leave
> 0xc01daa63 <acpi_ut_find_allocation+54>: ret
> End of assembler dump.
>
>
>
-------------------------------------------------------
SF.Net email is sponsored by: GoToMeeting - the easiest way to collaborate
online with coworkers and clients while avoiding the high cost of travel and
communications. There is no equipment to buy and you can meet as often as
you want. Try it free.http://ads.osdn.com/?ad_id=7402&alloc_id=16135&op=click
^ permalink raw reply [flat|nested] 27+ messages in thread
end of thread, other threads:[~2005-05-26 5:07 UTC | newest]
Thread overview: 27+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2005-04-08 10:08 2.6.12-rc2-mm2 Andrew Morton
2005-04-08 11:46 ` 2.6.12-rc2-mm2 Rafael J. Wysocki
2005-04-08 16:44 ` 2.6.12-rc2-mm2 Rafael J. Wysocki
2005-04-08 12:25 ` 2.6.12-rc2-mm2 Indrek Kruusa
2005-04-08 14:11 ` 2.6.12-rc2-mm2 Jan Dittmer
2005-04-08 15:23 ` 2.6.12-rc2-mm2 Paulo Marques
2005-04-08 14:14 ` 2.6.12-rc2-mm2 Jan Dittmer
[not found] ` <425691BD.9080507-wDE+IXx/zk/R7s880joybQ@public.gmane.org>
2005-04-08 22:21 ` 2.6.12-rc2-mm2 Andrew Morton
2005-04-08 22:21 ` 2.6.12-rc2-mm2 Andrew Morton
2005-04-08 15:17 ` 2.6.12-rc2-mm2 Alexander Nyberg
2005-04-08 17:28 ` 2.6.12-rc2-mm2 Alexey Dobriyan
2005-04-08 13:52 ` 2.6.12-rc2-mm2 Martin Waitz
2005-04-08 23:28 ` 2.6.12-rc2-mm2 Jesper Juhl
2005-04-09 1:49 ` 2.6.12-rc2-mm2 Adrian Bunk
2005-04-09 1:57 ` 2.6.12-rc2-mm2 Jesper Juhl
2005-04-09 12:51 ` 2.6.12-rc2-mm2 Adrian Bunk
[not found] ` <20050408030835.4941cd98.akpm-3NddpPZAyC0@public.gmane.org>
2005-04-09 13:43 ` 2.6.12-rc2-mm2 Alexander Nyberg
2005-04-09 13:43 ` 2.6.12-rc2-mm2 Alexander Nyberg
[not found] ` <1113054188.2364.23.camel-bi+AKbBUZKY6gyzm1THtWbp2dZbC/Bob@public.gmane.org>
2005-04-09 17:22 ` 2.6.12-rc2-mm2 =?gb18030?q?Ois=A8=AAn_Mac_Fheara=A8=AA?=
2005-05-26 5:07 ` 2.6.12-rc2-mm2 Andrew Morton
2005-04-10 13:31 ` 2.6.12-rc2-mm2 Alexander Nyberg
2005-04-10 22:48 ` 2.6.12-rc2-mm2 Adrian Bunk
2005-04-11 15:18 ` 2.6.12-rc2-mm2 Paul E. McKenney
2005-04-13 0:36 ` 2.6.12-rc2-mm2 Adrian Bunk
2005-04-13 1:32 ` 2.6.12-rc2-mm2 Paul E. McKenney
-- strict thread matches above, loose matches on Subject: below --
2005-04-08 11:50 2.6.12-rc2-mm2 Michael Thonke
2005-04-10 15:06 2.6.12-rc2-mm2 Pavel Machek
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.