* blocking all trafic exapt selcter ports @ 2005-04-23 8:47 Kashif Ali Bukhari 2005-04-23 9:20 ` Edward Shornock 2005-04-23 9:23 ` Ed 0 siblings, 2 replies; 9+ messages in thread From: Kashif Ali Bukhari @ 2005-04-23 8:47 UTC (permalink / raw) To: netfilter i want to block all inbod access to my linux box and want to allow dns, http proxy,ssh,telnet,and ftp how can i do this -- Syed Kashif Ali Bukhari Network Associate Asia Net Cell :- +92-300-4018407 , +92-300-4295604 Ph +92-42-111-111-202 Fax +92-42-5840905 MSN:- kbukhari@msn.com ; kashif.bukhari@asia.net.pk http://asia.net.pk , http://asiatec.biz ^ permalink raw reply [flat|nested] 9+ messages in thread
* Re: blocking all trafic exapt selcter ports 2005-04-23 8:47 blocking all trafic exapt selcter ports Kashif Ali Bukhari @ 2005-04-23 9:20 ` Edward Shornock 2005-04-23 9:23 ` Ed 1 sibling, 0 replies; 9+ messages in thread From: Edward Shornock @ 2005-04-23 9:20 UTC (permalink / raw) To: netfilter Kashif Ali Bukhari wrote: > i want to block all inbod access to my linux box and want to allow > dns, http proxy,ssh,telnet,and ftp > how can i do this > First, please see http://www.catb.org/~esr/faqs/smart-questions.html iptables -A INPUT -p tcp --dport 21 -j ACCEPT iptables -A INPUT -p tcp --dport 22 -j ACCEPT iptables -A INPUT -p tcp --dport 23 -j ACCEPT iptables -A INPUT -p tcp --dport 53 -j ACCEPT iptables -A INPUT -p tcp --dport 3128 -j ACCEPT iptables -P INPUT DROP or if you compile your kernel/iptables with multiport support iptables -A INPUT -m multiport -p tcp --dports 21-23,53,3128 -j ACCEPT iptables -P INPUT DROP A classic RTFM/STFW case, nonetheless... ^ permalink raw reply [flat|nested] 9+ messages in thread
* Re: blocking all trafic exapt selcter ports 2005-04-23 8:47 blocking all trafic exapt selcter ports Kashif Ali Bukhari 2005-04-23 9:20 ` Edward Shornock @ 2005-04-23 9:23 ` Ed 2005-04-23 14:54 ` Jason Opperisano 1 sibling, 1 reply; 9+ messages in thread From: Ed @ 2005-04-23 9:23 UTC (permalink / raw) To: netfilter Kashif Ali Bukhari wrote: > i want to block all inbod access to my linux box and want to allow > dns, http proxy,ssh,telnet,and ftp > how can i do this > First, please see http://www.catb.org/~esr/faqs/smart-questions.html iptables -A INPUT -p tcp --dport 21 -j ACCEPT iptables -A INPUT -p tcp --dport 22 -j ACCEPT iptables -A INPUT -p tcp --dport 23 -j ACCEPT iptables -A INPUT -p tcp --dport 53 -j ACCEPT iptables -A INPUT -p tcp --dport 3128 -j ACCEPT iptables -P INPUT DROP or if you compile your kernel/iptables with multiport support iptables -A INPUT -m multiport -p tcp --dports 21-23,53,3128 -j ACCEPT iptables -P INPUT DROP A classic RTFM/STFW case, nonetheless... ^ permalink raw reply [flat|nested] 9+ messages in thread
* Re: blocking all trafic exapt selcter ports 2005-04-23 9:23 ` Ed @ 2005-04-23 14:54 ` Jason Opperisano 2005-04-23 20:58 ` Ed 0 siblings, 1 reply; 9+ messages in thread From: Jason Opperisano @ 2005-04-23 14:54 UTC (permalink / raw) To: netfilter On Sat, Apr 23, 2005 at 05:23:07AM -0400, Ed wrote: > Kashif Ali Bukhari wrote: > > i want to block all inbod access to my linux box and want to allow > > dns, http proxy,ssh,telnet,and ftp > > how can i do this > > First, please see > http://www.catb.org/~esr/faqs/smart-questions.html i love that link. > iptables -A INPUT -p tcp --dport 21 -j ACCEPT > iptables -A INPUT -p tcp --dport 22 -j ACCEPT > iptables -A INPUT -p tcp --dport 23 -j ACCEPT > iptables -A INPUT -p tcp --dport 53 -j ACCEPT and: iptables -A INPUT -p udp --dport 53 -j ACCEPT > iptables -A INPUT -p tcp --dport 3128 -j ACCEPT > iptables -P INPUT DROP > > or if you compile your kernel/iptables with multiport support > > iptables -A INPUT -m multiport -p tcp --dports 21-23,53,3128 -j ACCEPT multiport doesn't support ranges, mport does (and it uses a ':' not a '-'): iptables -A INPUT -p tcp -m mport --dports 21:23,53,3128 -j ACCEPT iptables -A INPUT -p udp --dport 53 -j ACCEPT > iptables -P INPUT DROP > > A classic RTFM/STFW case, nonetheless... yes. couldn't resist the nit-pick, though. ;-) -j -- "Joe Swanson: You can't just come over here and annex my pool! Peter: Oh yeah? Well, according to paragraph 7, sentence 3, word 8 of the Geneva Convention..."the". So, tough luck, Swanson." --Family Guy ^ permalink raw reply [flat|nested] 9+ messages in thread
* Re: blocking all trafic exapt selcter ports 2005-04-23 14:54 ` Jason Opperisano @ 2005-04-23 20:58 ` Ed 2005-04-23 22:36 ` blocking all traffic except selected ports Ed 0 siblings, 1 reply; 9+ messages in thread From: Ed @ 2005-04-23 20:58 UTC (permalink / raw) To: netfilter Jason Opperisano wrote: > On Sat, Apr 23, 2005 at 05:23:07AM -0400, Ed wrote: > >>Kashif Ali Bukhari wrote: >> >>>i want to block all inbod access to my linux box and want to allow >>>dns, http proxy,ssh,telnet,and ftp >>>how can i do this >> >>First, please see >>http://www.catb.org/~esr/faqs/smart-questions.html > > > i love that link. > Me too :) > > > and: > iptables -A INPUT -p udp --dport 53 -j ACCEPT > Ooops, shouldn't respond when really tired. =P > > multiport doesn't support ranges, mport does (and it uses a ':' not a > '-'): Again, tiredness :S (glad you caught that). >>A classic RTFM/STFW case, nonetheless... > > > yes. couldn't resist the nit-pick, though. ;-) ...and for that I am grateful. TY (really!) for the corrections. =) I shouldn't post when really tired (instead of drinking, that'll be my excuse). /me goes back to primarily lurking... ^ permalink raw reply [flat|nested] 9+ messages in thread
* Re: blocking all traffic except selected ports 2005-04-23 20:58 ` Ed @ 2005-04-23 22:36 ` Ed 2005-04-23 22:50 ` Jason Opperisano 0 siblings, 1 reply; 9+ messages in thread From: Ed @ 2005-04-23 22:36 UTC (permalink / raw) To: netfilter Ed wrote: > Jason Opperisano wrote: > >>multiport doesn't support ranges, mport does (and it uses a ':' not a >>'-'): > > > Again, tiredness :S (glad you caught that). > > Actually (after having a pot of coffee) I just looked at `iptables -m multiport --help` on my box, and saw the following: multiport v1.3.1 options: --source-ports [!] port[,port:port,port...] --sports ... match source port(s) --destination-ports [!] port[,port:port,port...] --dports ... match destination port(s) --ports [!] port[,port:port,port] match both source and destination port(s) It seems multiport has been updated to use port ranges after all. (Note to self: don't reply to messages right after waking up either. UGH! I thought there was a reason that I switched from mport to multiport on my router...) https://lists.netfilter.org/pipermail/netfilter-devel/2005-January/017977.html # uname -r && iptables --version 2.6.11.7 iptables v1.3.1 From http://www.netfilter.org/patch-o-matic/pom-obsolete.html > iptables mport match > Author: Andreas Ferber <af@devcon.net> > Status: Deprecated by 'multiport' version1 in 2.6.11-rcX > > This module is an enhanced multiport match. It has support for byte > ranges as well as for single ports. > Up to 15 ports are allowed. Note that a portrange uses up 2 port values. > > Examples: > # iptables -A FORWARD -p tcp -m mport --ports 23:42,65 The way I understand it, if you're using a Linux kernel that is older than 2.6.11-rcX, use mport. Otherwise use multiport. /me still admits being wrong about the ':' separator, as well as forgetting about the UDP protocol for DNS though. =) (Thanks for the nitpicking, J, it really is appreciated. I don't want to spread *incorrect* information.) ^ permalink raw reply [flat|nested] 9+ messages in thread
* Re: blocking all traffic except selected ports 2005-04-23 22:36 ` blocking all traffic except selected ports Ed @ 2005-04-23 22:50 ` Jason Opperisano 2005-04-23 22:54 ` Taylor Grant 0 siblings, 1 reply; 9+ messages in thread From: Jason Opperisano @ 2005-04-23 22:50 UTC (permalink / raw) To: netfilter On Sat, Apr 23, 2005 at 06:36:15PM -0400, Ed wrote: > Actually (after having a pot of coffee) I just looked at `iptables -m > multiport --help` on my box, and saw the following: > > > multiport v1.3.1 options: > --source-ports [!] port[,port:port,port...] > --sports ... > match source port(s) > --destination-ports [!] port[,port:port,port...] > --dports ... > match destination port(s) > --ports [!] port[,port:port,port] > match both source and destination port(s) > > > It seems multiport has been updated to use port ranges after all. > > (Note to self: don't reply to messages right after waking up either. > UGH! I thought there was a reason that I switched from mport to > multiport on my router...) > > https://lists.netfilter.org/pipermail/netfilter-devel/2005-January/017977.html > > # uname -r && iptables --version > 2.6.11.7 > iptables v1.3.1 this brings out an interesting point--as i was speaking from an iptables 1.2.11 perspective (i have not updated a single box to 1.3.x)...we're probably going to have to start specifying iptables version on almost every post to keep from confusing the hell outta people. -j -- "Chris: Dad, there's a guy outside who says I can't go to school. Peter: Yeah? Him and what army? Chris: The U.S. Army. Peter: ...that's a good army." --Family Guy ^ permalink raw reply [flat|nested] 9+ messages in thread
* Re: blocking all traffic except selected ports 2005-04-23 22:50 ` Jason Opperisano @ 2005-04-23 22:54 ` Taylor Grant 2005-04-23 23:07 ` R. DuFresne 0 siblings, 1 reply; 9+ messages in thread From: Taylor Grant @ 2005-04-23 22:54 UTC (permalink / raw) To: netfilter Jason Opperisano wrote: > this brings out an interesting point--as i was speaking from an iptables > 1.2.11 perspective (i have not updated a single box to 1.3.x)...we're > probably going to have to start specifying iptables version on almost > every post to keep from confusing the hell outta people. *nod* I could easily see this becoming a problem. Is this something that is worth posting / starting and administrative / thread on this list stating that there has been a Flag Day in iptables? Do we need to come up with a conversion method or at least a table that references version with the old way and new way? Grant. . . . ^ permalink raw reply [flat|nested] 9+ messages in thread
* Re: blocking all traffic except selected ports 2005-04-23 22:54 ` Taylor Grant @ 2005-04-23 23:07 ` R. DuFresne 0 siblings, 0 replies; 9+ messages in thread From: R. DuFresne @ 2005-04-23 23:07 UTC (permalink / raw) To: Taylor Grant; +Cc: netfilter -----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 On Sat, 23 Apr 2005, Taylor Grant wrote: > Jason Opperisano wrote: >> this brings out an interesting point--as i was speaking from an iptables >> 1.2.11 perspective (i have not updated a single box to 1.3.x)...we're >> probably going to have to start specifying iptables version on almost >> every post to keep from confusing the hell outta people. > > *nod* I could easily see this becoming a problem. Is this something that is > worth posting / starting and administrative / thread on this list stating > that there has been a Flag Day in iptables? Do we need to come up with a > conversion method or at least a table that references version with the old > way and new way? > Versioning in the subject would be the preferred method; Subject : version 1.2.11 Re: blocking all traffic except selected ports Thanks, Ron DuFresne - -- ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ admin & senior security consultant: sysinfo.com http://sysinfo.com Key fingerprint = 9401 4B13 B918 164C 647A E838 B2DF AFCC 94B0 6629 ...We waste time looking for the perfect lover instead of creating the perfect love. -Tom Robbins <Still Life With Woodpecker> -----BEGIN PGP SIGNATURE----- Version: GnuPG v1.2.4 (GNU/Linux) iD8DBQFCatVMst+vzJSwZikRAvAbAKCpAXAS3PH1kC3Hq09509NNUgARkwCgtuuQ OPK3cfmrOEhJ+m00T61LPn8= =2J+A -----END PGP SIGNATURE----- ^ permalink raw reply [flat|nested] 9+ messages in thread
end of thread, other threads:[~2005-04-23 23:07 UTC | newest] Thread overview: 9+ messages (download: mbox.gz follow: Atom feed -- links below jump to the message on this page -- 2005-04-23 8:47 blocking all trafic exapt selcter ports Kashif Ali Bukhari 2005-04-23 9:20 ` Edward Shornock 2005-04-23 9:23 ` Ed 2005-04-23 14:54 ` Jason Opperisano 2005-04-23 20:58 ` Ed 2005-04-23 22:36 ` blocking all traffic except selected ports Ed 2005-04-23 22:50 ` Jason Opperisano 2005-04-23 22:54 ` Taylor Grant 2005-04-23 23:07 ` R. DuFresne
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.