All of lore.kernel.org
 help / color / mirror / Atom feed
From: Mark Gross <mgross@linux.intel.com>
To: Greg KH <greg@kroah.com>
Cc: akpm@osdl.org, linux-kernel@vger.kernel.org,
	Sebastien.Bouchard@ca.kontron.com, mark.gross@intel.com
Subject: Re: Fwd: Telecom Clock Driver for MPCBL0010 ATCA computer blade
Date: Thu, 6 Oct 2005 15:54:34 -0700	[thread overview]
Message-ID: <200510061554.35039.mgross@linux.intel.com> (raw)
In-Reply-To: <20051006182022.GA14414@kroah.com>

[-- Attachment #1: Type: text/plain, Size: 1119 bytes --]

On Thursday 06 October 2005 11:20, Greg KH wrote:
> > +             printk(KERN_ERR" misc_register retruns %d \n", ret);
> > +             ret =  -EBUSY;
> > +             goto out3;
> > +     }
> > +     class = tlclk_miscdev.class;
> > +     class_device_create_file(class, &class_device_attr_current_ref);
> 
> Try registering a whole attribute group instead.  It's much nicer than
> the 20 lines you have to register and unregister your devices (and you
> don't handle the error condition properly if something goes wrong half
> way through.)
> 

I couldn't find such an API that wasn't static to class.c, or described in class.txt.  Any pointers on this would be helpful.


> > diff -urN -X dontdiff linux-2.6.14-rc2-mm2/drivers/char/tlclk.h linux-2.6.14-rc2-mm2-tlclk/drivers/char/tlclk.h
> 
> Why not just put this stuff into the tlclk.c file itself, as it isn't
> needed anywhere else?
> 
done.

Attached is an update that I think addresses your other comments.

Thanks for looking at this.

-- 
--mgross
BTW: This may or may not be the opinion of my employer, more likely not.  

[-- Attachment #2: tlclk-2.6.14-rc2-mm2.patch --]
[-- Type: text/x-diff, Size: 25172 bytes --]

diff -urN -X dontdiff linux-2.6.14-rc2-mm2/drivers/char/Kconfig linux-2.6.14-rc2-mm2-tlclk/drivers/char/Kconfig
--- linux-2.6.14-rc2-mm2/drivers/char/Kconfig	2005-10-04 14:55:15.000000000 -0700
+++ linux-2.6.14-rc2-mm2-tlclk/drivers/char/Kconfig	2005-10-04 14:57:47.000000000 -0700
@@ -1001,5 +1001,15 @@
 
 source "drivers/char/tpm/Kconfig"
 
+config TELCLOCK
+	tristate "Telecom clock driver for ATCA"
+	depends on EXPERIMENTAL
+	default n
+	help
+	  The telecom clock device allows direct userspace access to the
+	  configuration of the telecom clock configuration settings.
+	  This device is used for hardware synchronization across the ATCA
+	  backplane fabric.
+
 endmenu
 
diff -urN -X dontdiff linux-2.6.14-rc2-mm2/drivers/char/Makefile linux-2.6.14-rc2-mm2-tlclk/drivers/char/Makefile
--- linux-2.6.14-rc2-mm2/drivers/char/Makefile	2005-10-04 14:55:15.000000000 -0700
+++ linux-2.6.14-rc2-mm2-tlclk/drivers/char/Makefile	2005-10-04 14:57:47.000000000 -0700
@@ -82,6 +82,7 @@
 obj-$(CONFIG_SCx200_GPIO) += scx200_gpio.o
 obj-$(CONFIG_GPIO_VR41XX) += vr41xx_giu.o
 obj-$(CONFIG_TANBAC_TB0219) += tb0219.o
+obj-$(CONFIG_TELCLOCK) += tlclk.o
 
 obj-$(CONFIG_SPEAKUP) += speakup/
 obj-$(CONFIG_WATCHDOG)	+= watchdog/
diff -urN -X dontdiff linux-2.6.14-rc2-mm2/drivers/char/tlclk.c linux-2.6.14-rc2-mm2-tlclk/drivers/char/tlclk.c
--- linux-2.6.14-rc2-mm2/drivers/char/tlclk.c	1969-12-31 16:00:00.000000000 -0800
+++ linux-2.6.14-rc2-mm2-tlclk/drivers/char/tlclk.c	2005-10-06 15:41:56.000000000 -0700
@@ -0,0 +1,868 @@
+/*
+ * Telecom Clock driver for Intel NetStructure(tm) MPCBL0010
+ *
+ * Copyright (C) 2005 Kontron Canada
+ *
+ * All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or (at
+ * your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or
+ * NON INFRINGEMENT.  See the GNU General Public License for more
+ * details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ *
+ * Send feedback to <sebastien.bouchard@ca.kontron.com> and the current
+ * Maintainer  <mark.gross@intel.com>
+ *
+ * Description : This is the TELECOM CLOCK module driver for the ATCA
+ * MPCBL0010 ATCA computer.
+ */
+
+#include <linux/config.h>
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/sched.h>
+#include <linux/kernel.h>	/* printk() */
+#include <linux/fs.h>		/* everything... */
+#include <linux/errno.h>	/* error codes */
+#include <linux/delay.h>	/* udelay */
+#include <linux/slab.h>
+#include <linux/ioport.h>
+#include <linux/interrupt.h>
+#include <linux/spinlock.h>
+#include <linux/timer.h>
+#include <linux/sysfs.h>
+#include <linux/device.h>
+#include <linux/miscdevice.h>
+#include <asm/io.h>		/* inb/outb */
+#include <asm/uaccess.h>
+
+MODULE_AUTHOR("Sebastien Bouchard <sebastien.bouchard@ca.kontron.com>");
+MODULE_LICENSE("GPL");
+
+/*Hardware Reset of the PLL */
+#define RESET_ON	0x00
+#define RESET_OFF	0x01
+
+/* MODE SELECT */
+#define NORMAL_MODE 	0x00
+#define HOLDOVER_MODE	0x10
+#define FREERUN_MODE	0x20
+
+/* FILTER SELECT */
+#define FILTER_6HZ	0x04
+#define FILTER_12HZ	0x00
+
+/* SELECT REFERENCE FREQUENCY */
+#define REF_CLK1_8kHz		0x00
+#define REF_CLK2_19_44MHz	0x02
+
+/* Select primary or secondary redundant clock */
+#define PRIMARY_CLOCK	0x00
+#define SECONDARY_CLOCK	0x01
+
+/* CLOCK TRANSMISSION DEFINE */
+#define CLK_8kHz	0xff
+#define CLK_16_384MHz	0xfb
+
+#define CLK_1_544MHz	0x00
+#define CLK_2_048MHz	0x01
+#define CLK_4_096MHz	0x02
+#define CLK_6_312MHz	0x03
+#define CLK_8_192MHz	0x04
+#define CLK_19_440MHz	0x06
+
+#define CLK_8_592MHz	0x08
+#define CLK_11_184MHz	0x09
+#define CLK_34_368MHz	0x0b
+#define CLK_44_736MHz	0x0a
+
+/* RECEIVED REFERENCE */
+#define AMC_B1 0
+#define AMC_B2 1
+
+/* HARDWARE SWITCHING DEFINE */
+#define HW_ENABLE	0x80
+#define HW_DISABLE	0x00
+
+/* HARDWARE SWITCHING MODE DEFINE */
+#define PLL_HOLDOVER	0x40
+#define LOST_CLOCK	0x00
+
+/* ALARMS DEFINE */
+#define UNLOCK_MASK	0x10
+#define HOLDOVER_MASK	0x20
+#define SEC_LOST_MASK	0x40
+#define PRI_LOST_MASK	0x80
+
+/* INTERRUPT CAUSE DEFINE */
+
+#define PRI_LOS_01_MASK		0x01
+#define PRI_LOS_10_MASK		0x02
+
+#define SEC_LOS_01_MASK		0x04
+#define SEC_LOS_10_MASK		0x08
+
+#define HOLDOVER_01_MASK	0x10
+#define HOLDOVER_10_MASK	0x20
+
+#define UNLOCK_01_MASK		0x40
+#define UNLOCK_10_MASK		0x80
+
+struct tlclk_alarms {
+	__u32 lost_clocks;
+	__u32 lost_primary_clock;
+	__u32 lost_secondary_clock;
+	__u32 primary_clock_back;
+	__u32 secondary_clock_back;
+	__u32 switchover_primary;
+	__u32 switchover_secondary;
+	__u32 pll_holdover;
+	__u32 pll_end_holdover;
+	__u32 pll_lost_sync;
+	__u32 pll_sync;
+};
+/* Telecom clock I/O register definition */
+#define TLCLK_BASE 0xa08
+#define TLCLK_REG0 TLCLK_BASE
+#define TLCLK_REG1 (TLCLK_BASE+1)
+#define TLCLK_REG2 (TLCLK_BASE+2)
+#define TLCLK_REG3 (TLCLK_BASE+3)
+#define TLCLK_REG4 (TLCLK_BASE+4)
+#define TLCLK_REG5 (TLCLK_BASE+5)
+#define TLCLK_REG6 (TLCLK_BASE+6)
+#define TLCLK_REG7 (TLCLK_BASE+7)
+
+#define SET_PORT_BITS(port, mask, val) outb(((inb(port) & mask) | val), port)
+
+/* 0 = Dynamic allocation of the major device number */
+#define TLCLK_MAJOR 0
+
+/* sysfs interface definition:
+Uppon loading the driver will create a sysfs directory under class/misc/tlclk.
+
+This directory exports the following interfaces.  There operation is
+documented in the MCPBL0010 TPS under the Telecom Clock API section, 11.4.
+alarms				:
+current_ref			:
+enable_clk3a_output		:
+enable_clk3b_output		:
+enable_clka0_output		:
+enable_clka1_output		:
+enable_clkb0_output		:
+enable_clkb1_output		:
+filter_select			:
+hardware_switching		:
+hardware_switching_mode		:
+interrupt_switch		:
+mode_select			:
+refalign			:
+reset				:
+select_amcb1_transmit_clock	:
+select_amcb2_transmit_clock	:
+select_redundant_clock		:
+select_ref_frequency		:
+test_mode			:
+
+All sysfs interfaces are integers in hex format, i.e echo 99 > refalign
+has the same effect as echo 0x99 > refalign.
+*/
+
+static unsigned int telclk_interrupt;
+
+static int int_events;		/* Event that generate a interrupt */
+static int got_event;		/* if events processing have been done */
+
+static void switchover_timeout(unsigned long data);
+static struct timer_list switchover_timer =
+	TIMER_INITIALIZER(switchover_timeout , 0, 0);
+
+static struct tlclk_alarms *alarm_events;
+
+static DEFINE_SPINLOCK(event_lock);
+
+static int tlclk_major = TLCLK_MAJOR;
+
+static irqreturn_t tlclk_interrupt(int irq, void *dev_id, struct pt_regs *regs);
+
+static DECLARE_WAIT_QUEUE_HEAD(wq);
+
+static int tlclk_open(struct inode *inode, struct file *filp)
+{
+	int result;
+
+	/* Make sure there is no interrupt pending while
+	 * initialising interrupt handler */
+	inb(TLCLK_REG6);
+
+	/* This device is wired through the FPGA IO space of the ATCA blade
+	 * we can't share this IRQ */
+	result = request_irq(telclk_interrupt, &tlclk_interrupt,
+			     SA_INTERRUPT, "telclock", tlclk_interrupt);
+	if (result == -EBUSY) {
+		printk(KERN_ERR "telclock: Interrupt can't be reserved!\n");
+		return -EBUSY;
+	}
+	inb(TLCLK_REG6);	/* Clear interrupt events */
+
+	return 0;
+}
+
+static int tlclk_release(struct inode *inode, struct file *filp)
+{
+	free_irq(telclk_interrupt, tlclk_interrupt);
+
+	return 0;
+}
+
+ssize_t tlclk_read(struct file *filp, char __user *buf, size_t count,
+		loff_t *f_pos)
+{
+	if (count < sizeof(struct tlclk_alarms))
+		return -EIO;
+
+	wait_event_interruptible(wq, got_event);
+	if (copy_to_user(buf, alarm_events, sizeof(struct tlclk_alarms)))
+		return -EFAULT;
+
+	memset(alarm_events, 0, sizeof(struct tlclk_alarms));
+	got_event = 0;
+
+	return  sizeof(struct tlclk_alarms);
+}
+
+ssize_t tlclk_write(struct file *filp, const char __user *buf, size_t count,
+	    loff_t *f_pos)
+{
+	return 0;
+}
+
+static struct file_operations tlclk_fops = {
+	.read = tlclk_read,
+	.write = tlclk_write,
+	.open = tlclk_open,
+	.release = tlclk_release,
+
+};
+
+static struct miscdevice tlclk_miscdev = {
+	.minor = MISC_DYNAMIC_MINOR,
+	.name = "tlclk",
+	.fops = &tlclk_fops,
+};
+
+static ssize_t show_current_ref(struct class_device *d, char *buf)
+{
+	unsigned long ret_val;
+	unsigned long flags;
+
+	spin_lock_irqsave(&event_lock, flags);
+	ret_val = ((inb(TLCLK_REG1) & 0x08) >> 3);
+	spin_unlock_irqrestore(&event_lock, flags);
+
+	return sprintf(buf, "0x%lX\n", ret_val);
+}
+
+static CLASS_DEVICE_ATTR(current_ref, S_IRUGO, show_current_ref, NULL);
+
+
+static ssize_t show_interrupt_switch(struct class_device *d, char *buf)
+{
+	unsigned long ret_val;
+	unsigned long flags;
+
+	spin_lock_irqsave(&event_lock, flags);
+	ret_val = inb(TLCLK_REG6);
+	spin_unlock_irqrestore(&event_lock, flags);
+
+	return sprintf(buf, "0x%lX\n", ret_val);
+}
+
+static CLASS_DEVICE_ATTR(interrupt_switch, S_IRUGO,
+		show_interrupt_switch, NULL);
+
+static ssize_t show_alarms(struct class_device *d, char *buf)
+{
+	unsigned long ret_val;
+	unsigned long flags;
+
+	spin_lock_irqsave(&event_lock, flags);
+	ret_val = (inb(TLCLK_REG2) & 0xf0);
+	spin_unlock_irqrestore(&event_lock, flags);
+
+	return sprintf(buf, "0x%lX\n", ret_val);
+}
+
+static CLASS_DEVICE_ATTR(alarms, S_IRUGO, show_alarms, NULL);
+
+static ssize_t store_enable_clk3b_output(struct class_device *d,
+		const char *buf, size_t count)
+{
+	unsigned long tmp;
+	unsigned char val;
+	unsigned long flags;
+
+	sscanf(buf, "%lX", &tmp);
+	dev_dbg(KERN_ERR "tmp = 0x%lX\n", tmp);
+
+	val = (unsigned char)tmp;
+	spin_lock_irqsave(&event_lock, flags);
+	SET_PORT_BITS(TLCLK_REG3, 0x7f, val << 7);
+	spin_unlock_irqrestore(&event_lock, flags);
+
+	return strnlen(buf, count);
+}
+
+static CLASS_DEVICE_ATTR(enable_clk3b_output, S_IWUGO, NULL,
+		store_enable_clk3b_output);
+
+static ssize_t store_enable_clk3a_output(struct class_device *d,
+		const char *buf, size_t count)
+{
+	unsigned long flags;
+	unsigned long tmp;
+	unsigned char val;
+
+	sscanf(buf, "%lX", &tmp);
+	dev_dbg(KERN_ERR "tmp = 0x%lX\n", tmp);
+
+	val = (unsigned char)tmp;
+	spin_lock_irqsave(&event_lock, flags);
+	SET_PORT_BITS(TLCLK_REG3, 0xbf, val << 6);
+	spin_unlock_irqrestore(&event_lock, flags);
+
+	return strnlen(buf, count);
+}
+
+static CLASS_DEVICE_ATTR(enable_clk3a_output, S_IWUGO, NULL,
+		store_enable_clk3a_output);
+
+static ssize_t store_enable_clkb1_output(struct class_device *d,
+		const char *buf, size_t count)
+{
+	unsigned long flags;
+	unsigned long tmp;
+	unsigned char val;
+
+	sscanf(buf, "%lX", &tmp);
+	dev_dbg(KERN_ERR "tmp = 0x%lX\n", tmp);
+
+	val = (unsigned char)tmp;
+	spin_lock_irqsave(&event_lock, flags);
+	SET_PORT_BITS(TLCLK_REG2, 0xf7, val << 3);
+	spin_unlock_irqrestore(&event_lock, flags);
+
+	return strnlen(buf, count);
+}
+
+static CLASS_DEVICE_ATTR(enable_clkb1_output, S_IWUGO, NULL,
+		store_enable_clkb1_output);
+
+
+static ssize_t store_enable_clka1_output(struct class_device *d,
+		const char *buf, size_t count)
+{
+	unsigned long flags;
+	unsigned long tmp;
+	unsigned char val;
+
+	sscanf(buf, "%lX", &tmp);
+	dev_dbg(KERN_ERR "tmp = 0x%lX\n", tmp);
+
+	val = (unsigned char)tmp;
+	spin_lock_irqsave(&event_lock, flags);
+	SET_PORT_BITS(TLCLK_REG2, 0xfb, val << 2);
+	spin_unlock_irqrestore(&event_lock, flags);
+
+	return strnlen(buf, count);
+}
+
+static CLASS_DEVICE_ATTR(enable_clka1_output, S_IWUGO, NULL,
+		store_enable_clka1_output);
+
+static ssize_t store_enable_clkb0_output(struct class_device *d,
+		const char *buf, size_t count)
+{
+	unsigned long flags;
+	unsigned long tmp;
+	unsigned char val;
+
+	sscanf(buf, "%lX", &tmp);
+	dev_dbg(KERN_ERR "tmp = 0x%lX\n", tmp);
+
+	val = (unsigned char)tmp;
+	spin_lock_irqsave(&event_lock, flags);
+	SET_PORT_BITS(TLCLK_REG2, 0xfd, val << 1);
+	spin_unlock_irqrestore(&event_lock, flags);
+
+	return strnlen(buf, count);
+}
+
+static CLASS_DEVICE_ATTR(enable_clkb0_output, S_IWUGO, NULL,
+		store_enable_clkb0_output);
+
+static ssize_t store_enable_clka0_output(struct class_device *d,
+		const char *buf, size_t count)
+{
+	unsigned long flags;
+	unsigned long tmp;
+	unsigned char val;
+
+	sscanf(buf, "%lX", &tmp);
+	dev_dbg(KERN_ERR "tmp = 0x%lX\n", tmp);
+
+	val = (unsigned char)tmp;
+	spin_lock_irqsave(&event_lock, flags);
+	SET_PORT_BITS(TLCLK_REG2, 0xfe, val);
+	spin_unlock_irqrestore(&event_lock, flags);
+
+	return strnlen(buf, count);
+}
+
+static CLASS_DEVICE_ATTR(enable_clka0_output, S_IWUGO, NULL,
+		store_enable_clka0_output);
+
+static ssize_t store_test_mode(struct class_device *d, const char *buf,
+		size_t count)
+{
+	unsigned long flags;
+	unsigned long tmp;
+	unsigned char val;
+
+	sscanf(buf, "%lX", &tmp);
+	dev_dbg(KERN_ERR "tmp = 0x%lX\n", tmp);
+
+	val = (unsigned char)tmp;
+	spin_lock_irqsave(&event_lock, flags);
+	SET_PORT_BITS(TLCLK_REG4, 0xfd, 2);
+	spin_unlock_irqrestore(&event_lock, flags);
+
+	return strnlen(buf, count);
+}
+
+static CLASS_DEVICE_ATTR(test_mode, S_IWUGO, NULL, store_test_mode);
+
+static ssize_t store_select_amcb2_transmit_clock(struct class_device *d,
+	const char *buf, size_t count)
+{
+	unsigned long flags;
+	unsigned long tmp;
+	unsigned char val;
+
+	sscanf(buf, "%lX", &tmp);
+	dev_dbg(KERN_ERR "tmp = 0x%lX\n", tmp);
+
+	val = (unsigned char)tmp;
+	spin_lock_irqsave(&event_lock, flags);
+		if ((val == CLK_8kHz) || (val == CLK_16_384MHz)) {
+			SET_PORT_BITS(TLCLK_REG3, 0xc7, 0x28);
+			SET_PORT_BITS(TLCLK_REG1, 0xfb, ~val);
+		} else if (val >= CLK_8_592MHz) {
+			SET_PORT_BITS(TLCLK_REG3, 0xc7, 0x38);
+			switch (val) {
+			case CLK_8_592MHz:
+				SET_PORT_BITS(TLCLK_REG0, 0xfc, 1);
+				break;
+			case CLK_11_184MHz:
+				SET_PORT_BITS(TLCLK_REG0, 0xfc, 0);
+				break;
+			case CLK_34_368MHz:
+				SET_PORT_BITS(TLCLK_REG0, 0xfc, 3);
+				break;
+			case CLK_44_736MHz:
+				SET_PORT_BITS(TLCLK_REG0, 0xfc, 2);
+				break;
+			}
+		} else
+			SET_PORT_BITS(TLCLK_REG3, 0xc7, val << 3);
+
+	spin_unlock_irqrestore(&event_lock, flags);
+
+	return strnlen(buf, count);
+}
+
+static CLASS_DEVICE_ATTR(select_amcb2_transmit_clock, S_IWUGO, NULL,
+	store_select_amcb2_transmit_clock);
+
+static ssize_t store_select_amcb1_transmit_clock(struct class_device *d,
+		const char *buf, size_t count)
+{
+	unsigned long tmp;
+	unsigned char val;
+	unsigned long flags;
+
+	sscanf(buf, "%lX", &tmp);
+	dev_dbg(KERN_ERR "tmp = 0x%lX\n", tmp);
+
+	val = (unsigned char)tmp;
+	spin_lock_irqsave(&event_lock, flags);
+		if ((val == CLK_8kHz) || (val == CLK_16_384MHz)) {
+			SET_PORT_BITS(TLCLK_REG3, 0xf8, 0x5);
+			SET_PORT_BITS(TLCLK_REG1, 0xfb, ~val);
+		} else if (val >= CLK_8_592MHz) {
+			SET_PORT_BITS(TLCLK_REG3, 0xf8, 0x7);
+			switch (val) {
+			case CLK_8_592MHz:
+				SET_PORT_BITS(TLCLK_REG0, 0xfc, 1);
+				break;
+			case CLK_11_184MHz:
+				SET_PORT_BITS(TLCLK_REG0, 0xfc, 0);
+				break;
+			case CLK_34_368MHz:
+				SET_PORT_BITS(TLCLK_REG0, 0xfc, 3);
+				break;
+			case CLK_44_736MHz:
+				SET_PORT_BITS(TLCLK_REG0, 0xfc, 2);
+				break;
+			}
+		} else
+			SET_PORT_BITS(TLCLK_REG3, 0xf8, val);
+	spin_unlock_irqrestore(&event_lock, flags);
+
+	return strnlen(buf, count);
+}
+
+static CLASS_DEVICE_ATTR(select_amcb1_transmit_clock, S_IWUGO, NULL,
+		store_select_amcb1_transmit_clock);
+
+static ssize_t store_select_redundant_clock(struct class_device *d,
+		const char *buf, size_t count)
+{
+	unsigned long tmp;
+	unsigned char val;
+	unsigned long flags;
+
+	sscanf(buf, "%lX", &tmp);
+	dev_dbg(KERN_ERR "tmp = 0x%lX\n", tmp);
+
+	val = (unsigned char)tmp;
+	spin_lock_irqsave(&event_lock, flags);
+	SET_PORT_BITS(TLCLK_REG1, 0xfe, val);
+	spin_unlock_irqrestore(&event_lock, flags);
+
+	return strnlen(buf, count);
+}
+
+static CLASS_DEVICE_ATTR(select_redundant_clock, S_IWUGO, NULL,
+		store_select_redundant_clock);
+
+static ssize_t store_select_ref_frequency(struct class_device *d,
+		const char *buf, size_t count)
+{
+	unsigned long tmp;
+	unsigned char val;
+	unsigned long flags;
+
+	sscanf(buf, "%lX", &tmp);
+	dev_dbg(KERN_ERR "tmp = 0x%lX\n", tmp);
+
+	val = (unsigned char)tmp;
+	spin_lock_irqsave(&event_lock, flags);
+	SET_PORT_BITS(TLCLK_REG1, 0xfd, val);
+	spin_unlock_irqrestore(&event_lock, flags);
+
+	return strnlen(buf, count);
+}
+
+static CLASS_DEVICE_ATTR(select_ref_frequency, S_IWUGO, NULL,
+		store_select_ref_frequency);
+
+static ssize_t store_filter_select(struct class_device *d,
+		const char *buf, size_t count)
+{
+	unsigned long tmp;
+	unsigned char val;
+	unsigned long flags;
+
+	sscanf(buf, "%lX", &tmp);
+	dev_dbg(KERN_ERR "tmp = 0x%lX\n", tmp);
+
+	val = (unsigned char)tmp;
+	spin_lock_irqsave(&event_lock, flags);
+	SET_PORT_BITS(TLCLK_REG0, 0xfb, val);
+	spin_unlock_irqrestore(&event_lock, flags);
+
+	return strnlen(buf, count);
+}
+
+static CLASS_DEVICE_ATTR(filter_select, S_IWUGO, NULL, store_filter_select);
+
+static ssize_t store_hardware_switching_mode(struct class_device *d,
+		const char *buf, size_t count)
+{
+	unsigned long tmp;
+	unsigned char val;
+	unsigned long flags;
+
+	sscanf(buf, "%lX", &tmp);
+	dev_dbg(KERN_ERR "tmp = 0x%lX\n", tmp);
+
+	val = (unsigned char)tmp;
+	spin_lock_irqsave(&event_lock, flags);
+	SET_PORT_BITS(TLCLK_REG0, 0xbf, val);
+	spin_unlock_irqrestore(&event_lock, flags);
+
+	return strnlen(buf, count);
+}
+
+static CLASS_DEVICE_ATTR(hardware_switching_mode, S_IWUGO, NULL,
+		store_hardware_switching_mode);
+
+static ssize_t store_hardware_switching(struct class_device *d,
+		const char *buf, size_t count)
+{
+	unsigned long tmp;
+	unsigned char val;
+	unsigned long flags;
+
+	sscanf(buf, "%lX", &tmp);
+	dev_dbg(KERN_ERR "tmp = 0x%lX\n", tmp);
+
+	val = (unsigned char)tmp;
+	spin_lock_irqsave(&event_lock, flags);
+	SET_PORT_BITS(TLCLK_REG0, 0x7f, val);
+	spin_unlock_irqrestore(&event_lock, flags);
+
+	return strnlen(buf, count);
+}
+
+static CLASS_DEVICE_ATTR(hardware_switching, S_IWUGO, NULL,
+		store_hardware_switching);
+
+static ssize_t store_refalign (struct class_device *d,
+		const char *buf, size_t count)
+{
+	unsigned long tmp;
+	unsigned long flags;
+
+	sscanf(buf, "%lX", &tmp);
+	dev_dbg(KERN_ERR "tmp = 0x%lX\n", tmp);
+	spin_lock_irqsave(&event_lock, flags);
+	SET_PORT_BITS(TLCLK_REG0, 0xf7, 0);
+	udelay(2);
+	SET_PORT_BITS(TLCLK_REG0, 0xf7, 0x08);
+	udelay(2);
+	SET_PORT_BITS(TLCLK_REG0, 0xf7, 0);
+	spin_unlock_irqrestore(&event_lock, flags);
+
+	return strnlen(buf, count);
+}
+
+static CLASS_DEVICE_ATTR(refalign, S_IWUGO, NULL, store_refalign);
+
+static ssize_t store_mode_select (struct class_device *d,
+		const char *buf, size_t count)
+{
+	unsigned long tmp;
+	unsigned char val;
+	unsigned long flags;
+
+	sscanf(buf, "%lX", &tmp);
+	dev_dbg(KERN_ERR "tmp = 0x%lX\n", tmp);
+
+	val = (unsigned char)tmp;
+	spin_lock_irqsave(&event_lock, flags);
+	SET_PORT_BITS(TLCLK_REG0, 0xcf, val);
+	spin_unlock_irqrestore(&event_lock, flags);
+
+	return strnlen(buf, count);
+}
+
+static CLASS_DEVICE_ATTR(mode_select, S_IWUGO, NULL, store_mode_select);
+
+static ssize_t store_reset (struct class_device *d,
+		const char *buf, size_t count)
+{
+	unsigned long tmp;
+	unsigned char val;
+	unsigned long flags;
+
+	sscanf(buf, "%lX", &tmp);
+	dev_dbg(KERN_ERR "tmp = 0x%lX\n", tmp);
+
+	val = (unsigned char)tmp;
+	spin_lock_irqsave(&event_lock, flags);
+	SET_PORT_BITS(TLCLK_REG4, 0xfd, val);
+	spin_unlock_irqrestore(&event_lock, flags);
+
+	return strnlen(buf, count);
+}
+
+static CLASS_DEVICE_ATTR(reset, S_IWUGO, NULL, store_reset);
+
+static int __init tlclk_init(void)
+{
+	int ret;
+	struct class_device *class;
+
+	ret = register_chrdev(tlclk_major, "telclock", &tlclk_fops);
+
+	if (ret < 0) {
+		printk(KERN_ERR "telclock: can't get major! %d\n", tlclk_major);
+		return ret;
+	}
+
+	alarm_events = kzalloc( sizeof(struct tlclk_alarms), GFP_KERNEL);
+
+	if (!alarm_events)
+		goto out1;
+
+/* Read telecom clock IRQ number (Set by BIOS) */
+
+	if (!request_region(TLCLK_BASE, 8, "telclock")) {
+		printk(KERN_ERR "tlclk: request_region failed! 0x%X\n",
+			TLCLK_BASE);
+		ret = -EBUSY;
+		goto out2;
+	}
+	telclk_interrupt = (inb(TLCLK_REG7) & 0x0f);
+
+	if (0x0F == telclk_interrupt ) { /* not MCPBL0010 ? */
+		printk(KERN_ERR "telclk_interrup = 0x%x non-mcpbl0010 hw\n",
+			telclk_interrupt);
+		ret = -ENXIO;
+		goto out3;
+	}
+
+	init_timer(&switchover_timer);
+/*	switchover_timer.function = switchover_timeout; */
+/*	switchover_timer.data = 0; */
+
+	ret = misc_register(&tlclk_miscdev);
+	if (ret < 0) {
+		printk(KERN_ERR" misc_register retruns %d\n", ret);
+		ret = -EBUSY;
+		goto out3;
+	}
+
+	class = tlclk_miscdev.class;
+	class_device_create_file(class, &class_device_attr_current_ref);
+	class_device_create_file(class, &class_device_attr_interrupt_switch);
+	class_device_create_file(class, &class_device_attr_alarms);
+	class_device_create_file(class, &class_device_attr_enable_clk3b_output);
+	class_device_create_file(class, &class_device_attr_enable_clk3a_output);
+	class_device_create_file(class, &class_device_attr_enable_clkb1_output);
+	class_device_create_file(class, &class_device_attr_enable_clka1_output);
+	class_device_create_file(class, &class_device_attr_enable_clkb0_output);
+	class_device_create_file(class, &class_device_attr_enable_clka0_output);
+	class_device_create_file(class, &class_device_attr_test_mode);
+	class_device_create_file(class,
+		&class_device_attr_select_amcb2_transmit_clock);
+	class_device_create_file(class,
+		&class_device_attr_select_amcb1_transmit_clock);
+	class_device_create_file(class, &class_device_attr_select_redundant_clock);
+	class_device_create_file(class, &class_device_attr_select_ref_frequency);
+	class_device_create_file(class, &class_device_attr_filter_select);
+	class_device_create_file(class,
+		&class_device_attr_hardware_switching_mode);
+	class_device_create_file(class, &class_device_attr_hardware_switching);
+	class_device_create_file(class, &class_device_attr_refalign);
+	class_device_create_file(class, &class_device_attr_mode_select);
+	class_device_create_file(class, &class_device_attr_reset);
+	
+	return 0;
+out3:
+	release_region(TLCLK_BASE, 8);
+out2:
+	kfree(alarm_events);
+out1:
+	return ret;
+}
+
+static void __exit tlclk_cleanup(void)
+{
+	misc_deregister(&tlclk_miscdev);
+	unregister_chrdev(tlclk_major, "telclock");
+
+	release_region(TLCLK_BASE, 8);
+	del_timer_sync(&switchover_timer);
+	kfree(alarm_events);
+
+}
+
+static void switchover_timeout(unsigned long data)
+{
+	if ((data & 1)) {
+		if ((inb(TLCLK_REG1) & 0x08) != (data & 0x08))
+			alarm_events->switchover_primary++;
+	} else {
+		if ((inb(TLCLK_REG1) & 0x08) != (data & 0x08))
+			alarm_events->switchover_secondary++;
+	}
+
+	/* Alarm processing is done, wake up read task */
+	del_timer(&switchover_timer);
+	got_event = 1;
+	wake_up(&wq);
+}
+
+static irqreturn_t tlclk_interrupt(int irq, void *dev_id, struct pt_regs *regs)
+{
+	unsigned long flags;
+
+	spin_lock_irqsave(&event_lock, flags);
+	/* Read and clear interrupt events */
+	int_events = inb(TLCLK_REG6);
+
+	/* Primary_Los changed from 0 to 1 ? */
+	if (int_events & PRI_LOS_01_MASK) {
+		if (inb(TLCLK_REG2) & SEC_LOST_MASK)
+			alarm_events->lost_clocks++;
+		else
+			alarm_events->lost_primary_clock++;
+	}
+
+	/* Primary_Los changed from 1 to 0 ? */
+	if (int_events & PRI_LOS_10_MASK) {
+		alarm_events->primary_clock_back++;
+		SET_PORT_BITS(TLCLK_REG1, 0xFE, 1);
+	}
+	/* Secondary_Los changed from 0 to 1 ? */
+	if (int_events & SEC_LOS_01_MASK) {
+		if (inb(TLCLK_REG2) & PRI_LOST_MASK)
+			alarm_events->lost_clocks++;
+		else
+			alarm_events->lost_secondary_clock++;
+	}
+	/* Secondary_Los changed from 1 to 0 ? */
+	if (int_events & SEC_LOS_10_MASK) {
+		alarm_events->secondary_clock_back++;
+		SET_PORT_BITS(TLCLK_REG1, 0xFE, 0);
+	}
+	if (int_events & HOLDOVER_10_MASK)
+		alarm_events->pll_end_holdover++;
+
+	if (int_events & UNLOCK_01_MASK)
+		alarm_events->pll_lost_sync++;
+
+	if (int_events & UNLOCK_10_MASK)
+		alarm_events->pll_sync++;
+
+	/* Holdover changed from 0 to 1 ? */
+	if (int_events & HOLDOVER_01_MASK) {
+		alarm_events->pll_holdover++;
+
+		/* TIMEOUT in ~10ms */
+		switchover_timer.expires = jiffies + msecs_to_jiffies(10);
+		switchover_timer.data = inb(TLCLK_REG1);
+		add_timer(&switchover_timer);
+	} else {
+		got_event = 1;
+		wake_up(&wq);
+	}
+	spin_unlock_irqrestore(&event_lock, flags);
+
+	return IRQ_HANDLED;
+}
+
+module_init(tlclk_init);
+module_exit(tlclk_cleanup);
diff -urN -X dontdiff linux-2.6.14-rc2-mm2/MAINTAINERS linux-2.6.14-rc2-mm2-tlclk/MAINTAINERS
--- linux-2.6.14-rc2-mm2/MAINTAINERS	2005-10-04 14:55:18.000000000 -0700
+++ linux-2.6.14-rc2-mm2-tlclk/MAINTAINERS	2005-10-06 10:02:23.000000000 -0700
@@ -2319,6 +2319,11 @@
 L:	tpmdd-devel@lists.sourceforge.net
 S:	Maintained
 
+Telecom Clock Driver for MCPL0010
+P: Mark Gross
+M: mark.gross@intel.com
+S: Supported
+
 TENSILICA XTENSA PORT (xtensa):
 P:	Chris Zankel
 M:	chris@zankel.net

  reply	other threads:[~2005-10-06 22:57 UTC|newest]

Thread overview: 18+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2005-10-06 15:03 Fwd: Telecom Clock Driver for MPCBL0010 ATCA computer blade Mark Gross
2005-10-06 16:52 ` Jesper Juhl
2005-10-06 17:28   ` Mark Gross
2005-10-07 12:21     ` Jesper Juhl
2005-10-06 17:24 ` Fwd: " Alexey Dobriyan
2005-10-06 17:31   ` Mark Gross
2005-10-06 18:20 ` Greg KH
2005-10-06 22:54   ` Mark Gross [this message]
2005-10-06 23:15     ` Greg KH
2005-10-12 22:30       ` Mark Gross
2005-10-12 22:49         ` Greg KH
2005-10-12 23:36           ` Mark Gross
2005-10-13  1:14             ` Greg KH
2005-10-13 21:36               ` Mark Gross
2005-10-13 22:08                 ` Jesper Juhl
2005-10-13 22:40                   ` Greg KH
     [not found]                     ` <9a8748490510131547s127f3167j6c9427ff3d97f878@mail.gmail.com>
     [not found]                       ` <20051014001547.GA4647@kroah.com>
2005-10-14  1:28                         ` Jesper Juhl
2005-10-06 23:45     ` Alexey Dobriyan

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=200510061554.35039.mgross@linux.intel.com \
    --to=mgross@linux.intel.com \
    --cc=Sebastien.Bouchard@ca.kontron.com \
    --cc=akpm@osdl.org \
    --cc=greg@kroah.com \
    --cc=linux-kernel@vger.kernel.org \
    --cc=mark.gross@intel.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.