* [PATCH 0/12] bcm1480 support
@ 2005-10-20 6:53 Andrew Isaacson
2005-10-20 6:54 ` [PATCH 1/12] sibyte-fixes Andrew Isaacson
` (11 more replies)
0 siblings, 12 replies; 16+ messages in thread
From: Andrew Isaacson @ 2005-10-20 6:53 UTC (permalink / raw)
To: linux-mips
This patch set against git changeset d1a2855c2190 adds support for the
BCM1480 family of SiByte SoCs. The following are supported:
- BCM1255, BCM1280, BCM1455, BCM1480 dual and quad core chips
- 4 on-chip cache-coherent GigE MACs
- native PCI-X
- HT/PCI-X tunnel
- SMBus
as well as the usual assortment of flash, uarts, DDR DRAM, etc.
It also includes a sibyte headers update, some code cleanups, and a hack
to work around a missing firmware feature.
-andy
^ permalink raw reply [flat|nested] 16+ messages in thread
* [PATCH 1/12] sibyte-fixes
2005-10-20 6:53 [PATCH 0/12] bcm1480 support Andrew Isaacson
@ 2005-10-20 6:54 ` Andrew Isaacson
2005-10-20 6:55 ` [PATCH 2/12] 1480-headers Andrew Isaacson
` (10 subsequent siblings)
11 siblings, 0 replies; 16+ messages in thread
From: Andrew Isaacson @ 2005-10-20 6:54 UTC (permalink / raw)
To: linux-mips
Fix typo in cpu_probe_sibyte
Signed-Off-By: Andy Isaacson <adi@broadcom.com>
arch/mips/kernel/cpu-probe.c | 2 +-
1 files changed, 1 insertion(+), 1 deletion(-)
Index: lmo/arch/mips/kernel/cpu-probe.c
===================================================================
--- lmo.orig/arch/mips/kernel/cpu-probe.c 2005-10-19 22:34:08.000000000 -0700
+++ lmo/arch/mips/kernel/cpu-probe.c 2005-10-19 22:34:10.000000000 -0700
@@ -618,7 +618,7 @@
* cache code which eventually will be folded into c-r4k.c. Until
* then we pretend it's got it's own cache architecture.
*/
- c->options &= MIPS_CPU_4K_CACHE;
+ c->options &= ~MIPS_CPU_4K_CACHE;
c->options |= MIPS_CPU_SB1_CACHE;
switch (c->processor_id & 0xff00) {
^ permalink raw reply [flat|nested] 16+ messages in thread
* [PATCH 2/12] 1480-headers
2005-10-20 6:53 [PATCH 0/12] bcm1480 support Andrew Isaacson
2005-10-20 6:54 ` [PATCH 1/12] sibyte-fixes Andrew Isaacson
@ 2005-10-20 6:55 ` Andrew Isaacson
2005-10-20 6:55 ` [PATCH 3/12] sibyte-header-cleanup Andrew Isaacson
` (9 subsequent siblings)
11 siblings, 0 replies; 16+ messages in thread
From: Andrew Isaacson @ 2005-10-20 6:55 UTC (permalink / raw)
To: linux-mips
Add header files for BCM1480/1280/1455/1255 family of chips, and
update sb1250 headers which are shared by BCM1480 family.
Signed-Off-By: Andy Isaacson <adi@broadcom.com>
include/asm-mips/sibyte/bcm1480_int.h | 310 ++++++++++
include/asm-mips/sibyte/bcm1480_l2c.h | 176 +++++
include/asm-mips/sibyte/bcm1480_mc.h | 962 ++++++++++++++++++++++++++++++++
include/asm-mips/sibyte/bcm1480_regs.h | 869 ++++++++++++++++++++++++++++
include/asm-mips/sibyte/bcm1480_scd.h | 436 ++++++++++++++
include/asm-mips/sibyte/sb1250.h | 11
include/asm-mips/sibyte/sb1250_defs.h | 33 -
include/asm-mips/sibyte/sb1250_dma.h | 65 +-
include/asm-mips/sibyte/sb1250_genbus.h | 225 +++++++
include/asm-mips/sibyte/sb1250_int.h | 6
include/asm-mips/sibyte/sb1250_l2c.h | 9
include/asm-mips/sibyte/sb1250_mac.h | 33 -
include/asm-mips/sibyte/sb1250_mc.h | 4
include/asm-mips/sibyte/sb1250_regs.h | 33 -
include/asm-mips/sibyte/sb1250_scd.h | 100 ++-
include/asm-mips/sibyte/sb1250_smbus.h | 53 +
include/asm-mips/sibyte/sb1250_uart.h | 11
17 files changed, 3237 insertions(+), 99 deletions(-)
Index: lmo/include/asm-mips/sibyte/bcm1480_int.h
===================================================================
--- /dev/null 1970-01-01 00:00:00.000000000 +0000
+++ lmo/include/asm-mips/sibyte/bcm1480_int.h 2005-10-19 22:34:11.000000000 -0700
@@ -0,0 +1,310 @@
+/* *********************************************************************
+ * BCM1280/BCM1480 Board Support Package
+ *
+ * Interrupt Mapper definitions File: bcm1480_int.h
+ *
+ * This module contains constants for manipulating the
+ * BCM1255/BCM1280/BCM1455/BCM1480's interrupt mapper and
+ * definitions for the interrupt sources.
+ *
+ * BCM1480 specification level: 1X55_1X80-UM100-D4 (11/24/03)
+ *
+ *********************************************************************
+ *
+ * Copyright 2000,2001,2002,2003
+ * Broadcom Corporation. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ ********************************************************************* */
+
+
+#ifndef _BCM1480_INT_H
+#define _BCM1480_INT_H
+
+#include "sb1250_defs.h"
+
+/* *********************************************************************
+ * Interrupt Mapper Constants
+ ********************************************************************* */
+
+/*
+ * The interrupt mapper deals with 128-bit logical registers that are
+ * implemented as pairs of 64-bit registers, with the "low" 64 bits in
+ * a register that has an address 0x1000 higher(!) than the
+ * corresponding "high" register.
+ *
+ * For appropriate registers, bit 0 of the "high" register is a
+ * cascade bit that summarizes (as a bit-OR) the 64 bits of the "low"
+ * register.
+ */
+
+/*
+ * This entire file uses _BCM1480_ in all the symbols because it is
+ * entirely BCM1480 specific.
+ */
+
+/*
+ * Interrupt sources (Table 22)
+ */
+
+#define K_BCM1480_INT_SOURCES 128
+
+#define _BCM1480_INT_HIGH(k) (k)
+#define _BCM1480_INT_LOW(k) ((k)+64)
+
+#define K_BCM1480_INT_ADDR_TRAP _BCM1480_INT_HIGH(1)
+#define K_BCM1480_INT_GPIO_0 _BCM1480_INT_HIGH(4)
+#define K_BCM1480_INT_GPIO_1 _BCM1480_INT_HIGH(5)
+#define K_BCM1480_INT_GPIO_2 _BCM1480_INT_HIGH(6)
+#define K_BCM1480_INT_GPIO_3 _BCM1480_INT_HIGH(7)
+#define K_BCM1480_INT_PCI_INTA _BCM1480_INT_HIGH(8)
+#define K_BCM1480_INT_PCI_INTB _BCM1480_INT_HIGH(9)
+#define K_BCM1480_INT_PCI_INTC _BCM1480_INT_HIGH(10)
+#define K_BCM1480_INT_PCI_INTD _BCM1480_INT_HIGH(11)
+#define K_BCM1480_INT_CYCLE_CP0 _BCM1480_INT_HIGH(12)
+#define K_BCM1480_INT_CYCLE_CP1 _BCM1480_INT_HIGH(13)
+#define K_BCM1480_INT_CYCLE_CP2 _BCM1480_INT_HIGH(14)
+#define K_BCM1480_INT_CYCLE_CP3 _BCM1480_INT_HIGH(15)
+#define K_BCM1480_INT_TIMER_0 _BCM1480_INT_HIGH(20)
+#define K_BCM1480_INT_TIMER_1 _BCM1480_INT_HIGH(21)
+#define K_BCM1480_INT_TIMER_2 _BCM1480_INT_HIGH(22)
+#define K_BCM1480_INT_TIMER_3 _BCM1480_INT_HIGH(23)
+#define K_BCM1480_INT_DM_CH_0 _BCM1480_INT_HIGH(28)
+#define K_BCM1480_INT_DM_CH_1 _BCM1480_INT_HIGH(29)
+#define K_BCM1480_INT_DM_CH_2 _BCM1480_INT_HIGH(30)
+#define K_BCM1480_INT_DM_CH_3 _BCM1480_INT_HIGH(31)
+#define K_BCM1480_INT_MAC_0 _BCM1480_INT_HIGH(36)
+#define K_BCM1480_INT_MAC_0_CH1 _BCM1480_INT_HIGH(37)
+#define K_BCM1480_INT_MAC_1 _BCM1480_INT_HIGH(38)
+#define K_BCM1480_INT_MAC_1_CH1 _BCM1480_INT_HIGH(39)
+#define K_BCM1480_INT_MAC_2 _BCM1480_INT_HIGH(40)
+#define K_BCM1480_INT_MAC_2_CH1 _BCM1480_INT_HIGH(41)
+#define K_BCM1480_INT_MAC_3 _BCM1480_INT_HIGH(42)
+#define K_BCM1480_INT_MAC_3_CH1 _BCM1480_INT_HIGH(43)
+#define K_BCM1480_INT_PMI_LOW _BCM1480_INT_HIGH(52)
+#define K_BCM1480_INT_PMI_HIGH _BCM1480_INT_HIGH(53)
+#define K_BCM1480_INT_PMO_LOW _BCM1480_INT_HIGH(54)
+#define K_BCM1480_INT_PMO_HIGH _BCM1480_INT_HIGH(55)
+#define K_BCM1480_INT_MBOX_0_0 _BCM1480_INT_HIGH(56)
+#define K_BCM1480_INT_MBOX_0_1 _BCM1480_INT_HIGH(57)
+#define K_BCM1480_INT_MBOX_0_2 _BCM1480_INT_HIGH(58)
+#define K_BCM1480_INT_MBOX_0_3 _BCM1480_INT_HIGH(59)
+#define K_BCM1480_INT_MBOX_1_0 _BCM1480_INT_HIGH(60)
+#define K_BCM1480_INT_MBOX_1_1 _BCM1480_INT_HIGH(61)
+#define K_BCM1480_INT_MBOX_1_2 _BCM1480_INT_HIGH(62)
+#define K_BCM1480_INT_MBOX_1_3 _BCM1480_INT_HIGH(63)
+
+#define K_BCM1480_INT_BAD_ECC _BCM1480_INT_LOW(1)
+#define K_BCM1480_INT_COR_ECC _BCM1480_INT_LOW(2)
+#define K_BCM1480_INT_IO_BUS _BCM1480_INT_LOW(3)
+#define K_BCM1480_INT_PERF_CNT _BCM1480_INT_LOW(4)
+#define K_BCM1480_INT_SW_PERF_CNT _BCM1480_INT_LOW(5)
+#define K_BCM1480_INT_TRACE_FREEZE _BCM1480_INT_LOW(6)
+#define K_BCM1480_INT_SW_TRACE_FREEZE _BCM1480_INT_LOW(7)
+#define K_BCM1480_INT_WATCHDOG_TIMER_0 _BCM1480_INT_LOW(8)
+#define K_BCM1480_INT_WATCHDOG_TIMER_1 _BCM1480_INT_LOW(9)
+#define K_BCM1480_INT_WATCHDOG_TIMER_2 _BCM1480_INT_LOW(10)
+#define K_BCM1480_INT_WATCHDOG_TIMER_3 _BCM1480_INT_LOW(11)
+#define K_BCM1480_INT_PCI_ERROR _BCM1480_INT_LOW(16)
+#define K_BCM1480_INT_PCI_RESET _BCM1480_INT_LOW(17)
+#define K_BCM1480_INT_NODE_CONTROLLER _BCM1480_INT_LOW(18)
+#define K_BCM1480_INT_HOST_BRIDGE _BCM1480_INT_LOW(19)
+#define K_BCM1480_INT_PORT_0_FATAL _BCM1480_INT_LOW(20)
+#define K_BCM1480_INT_PORT_0_NONFATAL _BCM1480_INT_LOW(21)
+#define K_BCM1480_INT_PORT_1_FATAL _BCM1480_INT_LOW(22)
+#define K_BCM1480_INT_PORT_1_NONFATAL _BCM1480_INT_LOW(23)
+#define K_BCM1480_INT_PORT_2_FATAL _BCM1480_INT_LOW(24)
+#define K_BCM1480_INT_PORT_2_NONFATAL _BCM1480_INT_LOW(25)
+#define K_BCM1480_INT_LDT_SMI _BCM1480_INT_LOW(32)
+#define K_BCM1480_INT_LDT_NMI _BCM1480_INT_LOW(33)
+#define K_BCM1480_INT_LDT_INIT _BCM1480_INT_LOW(34)
+#define K_BCM1480_INT_LDT_STARTUP _BCM1480_INT_LOW(35)
+#define K_BCM1480_INT_LDT_EXT _BCM1480_INT_LOW(36)
+#define K_BCM1480_INT_SMB_0 _BCM1480_INT_LOW(40)
+#define K_BCM1480_INT_SMB_1 _BCM1480_INT_LOW(41)
+#define K_BCM1480_INT_PCMCIA _BCM1480_INT_LOW(42)
+#define K_BCM1480_INT_UART_0 _BCM1480_INT_LOW(44)
+#define K_BCM1480_INT_UART_1 _BCM1480_INT_LOW(45)
+#define K_BCM1480_INT_UART_2 _BCM1480_INT_LOW(46)
+#define K_BCM1480_INT_UART_3 _BCM1480_INT_LOW(47)
+#define K_BCM1480_INT_GPIO_4 _BCM1480_INT_LOW(52)
+#define K_BCM1480_INT_GPIO_5 _BCM1480_INT_LOW(53)
+#define K_BCM1480_INT_GPIO_6 _BCM1480_INT_LOW(54)
+#define K_BCM1480_INT_GPIO_7 _BCM1480_INT_LOW(55)
+#define K_BCM1480_INT_GPIO_8 _BCM1480_INT_LOW(56)
+#define K_BCM1480_INT_GPIO_9 _BCM1480_INT_LOW(57)
+#define K_BCM1480_INT_GPIO_10 _BCM1480_INT_LOW(58)
+#define K_BCM1480_INT_GPIO_11 _BCM1480_INT_LOW(59)
+#define K_BCM1480_INT_GPIO_12 _BCM1480_INT_LOW(60)
+#define K_BCM1480_INT_GPIO_13 _BCM1480_INT_LOW(61)
+#define K_BCM1480_INT_GPIO_14 _BCM1480_INT_LOW(62)
+#define K_BCM1480_INT_GPIO_15 _BCM1480_INT_LOW(63)
+
+/*
+ * Mask values for each interrupt
+ */
+
+#define _BCM1480_INT_MASK1(n) _SB_MAKEMASK1(((n) & 0x3F))
+#define _BCM1480_INT_OFFSET(n) (((n) & 0x40) << 6)
+
+#define M_BCM1480_INT_CASCADE _BCM1480_INT_MASK1(_BCM1480_INT_HIGH(0))
+
+#define M_BCM1480_INT_ADDR_TRAP _BCM1480_INT_MASK1(K_BCM1480_INT_ADDR_TRAP)
+#define M_BCM1480_INT_GPIO_0 _BCM1480_INT_MASK1(K_BCM1480_INT_GPIO_0)
+#define M_BCM1480_INT_GPIO_1 _BCM1480_INT_MASK1(K_BCM1480_INT_GPIO_1)
+#define M_BCM1480_INT_GPIO_2 _BCM1480_INT_MASK1(K_BCM1480_INT_GPIO_2)
+#define M_BCM1480_INT_GPIO_3 _BCM1480_INT_MASK1(K_BCM1480_INT_GPIO_3)
+#define M_BCM1480_INT_PCI_INTA _BCM1480_INT_MASK1(K_BCM1480_INT_PCI_INTA)
+#define M_BCM1480_INT_PCI_INTB _BCM1480_INT_MASK1(K_BCM1480_INT_PCI_INTB)
+#define M_BCM1480_INT_PCI_INTC _BCM1480_INT_MASK1(K_BCM1480_INT_PCI_INTC)
+#define M_BCM1480_INT_PCI_INTD _BCM1480_INT_MASK1(K_BCM1480_INT_PCI_INTD)
+#define M_BCM1480_INT_CYCLE_CP0 _BCM1480_INT_MASK1(K_BCM1480_INT_CYCLE_CP0)
+#define M_BCM1480_INT_CYCLE_CP1 _BCM1480_INT_MASK1(K_BCM1480_INT_CYCLE_CP1)
+#define M_BCM1480_INT_CYCLE_CP2 _BCM1480_INT_MASK1(K_BCM1480_INT_CYCLE_CP2)
+#define M_BCM1480_INT_CYCLE_CP3 _BCM1480_INT_MASK1(K_BCM1480_INT_CYCLE_CP3)
+#define M_BCM1480_INT_TIMER_0 _BCM1480_INT_MASK1(K_BCM1480_INT_TIMER_0)
+#define M_BCM1480_INT_TIMER_1 _BCM1480_INT_MASK1(K_BCM1480_INT_TIMER_1)
+#define M_BCM1480_INT_TIMER_2 _BCM1480_INT_MASK1(K_BCM1480_INT_TIMER_2)
+#define M_BCM1480_INT_TIMER_3 _BCM1480_INT_MASK1(K_BCM1480_INT_TIMER_3)
+#define M_BCM1480_INT_DM_CH_0 _BCM1480_INT_MASK1(K_BCM1480_INT_DM_CH_0)
+#define M_BCM1480_INT_DM_CH_1 _BCM1480_INT_MASK1(K_BCM1480_INT_DM_CH_1)
+#define M_BCM1480_INT_DM_CH_2 _BCM1480_INT_MASK1(K_BCM1480_INT_DM_CH_2)
+#define M_BCM1480_INT_DM_CH_3 _BCM1480_INT_MASK1(K_BCM1480_INT_DM_CH_3)
+#define M_BCM1480_INT_MAC_0 _BCM1480_INT_MASK1(K_BCM1480_INT_MAC_0)
+#define M_BCM1480_INT_MAC_0_CH1 _BCM1480_INT_MASK1(K_BCM1480_INT_MAC_0_CH1)
+#define M_BCM1480_INT_MAC_1 _BCM1480_INT_MASK1(K_BCM1480_INT_MAC_1)
+#define M_BCM1480_INT_MAC_1_CH1 _BCM1480_INT_MASK1(K_BCM1480_INT_MAC_1_CH1)
+#define M_BCM1480_INT_MAC_2 _BCM1480_INT_MASK1(K_BCM1480_INT_MAC_2)
+#define M_BCM1480_INT_MAC_2_CH1 _BCM1480_INT_MASK1(K_BCM1480_INT_MAC_2_CH1)
+#define M_BCM1480_INT_MAC_3 _BCM1480_INT_MASK1(K_BCM1480_INT_MAC_3)
+#define M_BCM1480_INT_MAC_3_CH1 _BCM1480_INT_MASK1(K_BCM1480_INT_MAC_3_CH1)
+#define M_BCM1480_INT_PMI_LOW _BCM1480_INT_MASK1(K_BCM1480_INT_PMI_LOW)
+#define M_BCM1480_INT_PMI_HIGH _BCM1480_INT_MASK1(K_BCM1480_INT_PMI_HIGH)
+#define M_BCM1480_INT_PMO_LOW _BCM1480_INT_MASK1(K_BCM1480_INT_PMO_LOW)
+#define M_BCM1480_INT_PMO_HIGH _BCM1480_INT_MASK1(K_BCM1480_INT_PMO_HIGH)
+#define M_BCM1480_INT_MBOX_0_0 _BCM1480_INT_MASK1(K_BCM1480_INT_MBOX_0_0)
+#define M_BCM1480_INT_MBOX_0_1 _BCM1480_INT_MASK1(K_BCM1480_INT_MBOX_0_1)
+#define M_BCM1480_INT_MBOX_0_2 _BCM1480_INT_MASK1(K_BCM1480_INT_MBOX_0_2)
+#define M_BCM1480_INT_MBOX_0_3 _BCM1480_INT_MASK1(K_BCM1480_INT_MBOX_0_3)
+#define M_BCM1480_INT_MBOX_1_0 _BCM1480_INT_MASK1(K_BCM1480_INT_MBOX_1_0)
+#define M_BCM1480_INT_MBOX_1_1 _BCM1480_INT_MASK1(K_BCM1480_INT_MBOX_1_1)
+#define M_BCM1480_INT_MBOX_1_2 _BCM1480_INT_MASK1(K_BCM1480_INT_MBOX_1_2)
+#define M_BCM1480_INT_MBOX_1_3 _BCM1480_INT_MASK1(K_BCM1480_INT_MBOX_1_3)
+#define M_BCM1480_INT_BAD_ECC _BCM1480_INT_MASK1(K_BCM1480_INT_BAD_ECC)
+#define M_BCM1480_INT_COR_ECC _BCM1480_INT_MASK1(K_BCM1480_INT_COR_ECC)
+#define M_BCM1480_INT_IO_BUS _BCM1480_INT_MASK1(K_BCM1480_INT_IO_BUS)
+#define M_BCM1480_INT_PERF_CNT _BCM1480_INT_MASK1(K_BCM1480_INT_PERF_CNT)
+#define M_BCM1480_INT_SW_PERF_CNT _BCM1480_INT_MASK1(K_BCM1480_INT_SW_PERF_CNT)
+#define M_BCM1480_INT_TRACE_FREEZE _BCM1480_INT_MASK1(K_BCM1480_INT_TRACE_FREEZE)
+#define M_BCM1480_INT_SW_TRACE_FREEZE _BCM1480_INT_MASK1(K_BCM1480_INT_SW_TRACE_FREEZE)
+#define M_BCM1480_INT_WATCHDOG_TIMER_0 _BCM1480_INT_MASK1(K_BCM1480_INT_WATCHDOG_TIMER_0)
+#define M_BCM1480_INT_WATCHDOG_TIMER_1 _BCM1480_INT_MASK1(K_BCM1480_INT_WATCHDOG_TIMER_1)
+#define M_BCM1480_INT_WATCHDOG_TIMER_2 _BCM1480_INT_MASK1(K_BCM1480_INT_WATCHDOG_TIMER_2)
+#define M_BCM1480_INT_WATCHDOG_TIMER_3 _BCM1480_INT_MASK1(K_BCM1480_INT_WATCHDOG_TIMER_3)
+#define M_BCM1480_INT_PCI_ERROR _BCM1480_INT_MASK1(K_BCM1480_INT_PCI_ERROR)
+#define M_BCM1480_INT_PCI_RESET _BCM1480_INT_MASK1(K_BCM1480_INT_PCI_RESET)
+#define M_BCM1480_INT_NODE_CONTROLLER _BCM1480_INT_MASK1(K_BCM1480_INT_NODE_CONTROLLER)
+#define M_BCM1480_INT_HOST_BRIDGE _BCM1480_INT_MASK1(K_BCM1480_INT_HOST_BRIDGE)
+#define M_BCM1480_INT_PORT_0_FATAL _BCM1480_INT_MASK1(K_BCM1480_INT_PORT_0_FATAL)
+#define M_BCM1480_INT_PORT_0_NONFATAL _BCM1480_INT_MASK1(K_BCM1480_INT_PORT_0_NONFATAL)
+#define M_BCM1480_INT_PORT_1_FATAL _BCM1480_INT_MASK1(K_BCM1480_INT_PORT_1_FATAL)
+#define M_BCM1480_INT_PORT_1_NONFATAL _BCM1480_INT_MASK1(K_BCM1480_INT_PORT_1_NONFATAL)
+#define M_BCM1480_INT_PORT_2_FATAL _BCM1480_INT_MASK1(K_BCM1480_INT_PORT_2_FATAL)
+#define M_BCM1480_INT_PORT_2_NONFATAL _BCM1480_INT_MASK1(K_BCM1480_INT_PORT_2_NONFATAL)
+#define M_BCM1480_INT_LDT_SMI _BCM1480_INT_MASK1(K_BCM1480_INT_LDT_SMI)
+#define M_BCM1480_INT_LDT_NMI _BCM1480_INT_MASK1(K_BCM1480_INT_LDT_NMI)
+#define M_BCM1480_INT_LDT_INIT _BCM1480_INT_MASK1(K_BCM1480_INT_LDT_INIT)
+#define M_BCM1480_INT_LDT_STARTUP _BCM1480_INT_MASK1(K_BCM1480_INT_LDT_STARTUP)
+#define M_BCM1480_INT_LDT_EXT _BCM1480_INT_MASK1(K_BCM1480_INT_LDT_EXT)
+#define M_BCM1480_INT_SMB_0 _BCM1480_INT_MASK1(K_BCM1480_INT_SMB_0)
+#define M_BCM1480_INT_SMB_1 _BCM1480_INT_MASK1(K_BCM1480_INT_SMB_1)
+#define M_BCM1480_INT_PCMCIA _BCM1480_INT_MASK1(K_BCM1480_INT_PCMCIA)
+#define M_BCM1480_INT_UART_0 _BCM1480_INT_MASK1(K_BCM1480_INT_UART_0)
+#define M_BCM1480_INT_UART_1 _BCM1480_INT_MASK1(K_BCM1480_INT_UART_1)
+#define M_BCM1480_INT_UART_2 _BCM1480_INT_MASK1(K_BCM1480_INT_UART_2)
+#define M_BCM1480_INT_UART_3 _BCM1480_INT_MASK1(K_BCM1480_INT_UART_3)
+#define M_BCM1480_INT_GPIO_4 _BCM1480_INT_MASK1(K_BCM1480_INT_GPIO_4)
+#define M_BCM1480_INT_GPIO_5 _BCM1480_INT_MASK1(K_BCM1480_INT_GPIO_5)
+#define M_BCM1480_INT_GPIO_6 _BCM1480_INT_MASK1(K_BCM1480_INT_GPIO_6)
+#define M_BCM1480_INT_GPIO_7 _BCM1480_INT_MASK1(K_BCM1480_INT_GPIO_7)
+#define M_BCM1480_INT_GPIO_8 _BCM1480_INT_MASK1(K_BCM1480_INT_GPIO_8)
+#define M_BCM1480_INT_GPIO_9 _BCM1480_INT_MASK1(K_BCM1480_INT_GPIO_9)
+#define M_BCM1480_INT_GPIO_10 _BCM1480_INT_MASK1(K_BCM1480_INT_GPIO_10)
+#define M_BCM1480_INT_GPIO_11 _BCM1480_INT_MASK1(K_BCM1480_INT_GPIO_11)
+#define M_BCM1480_INT_GPIO_12 _BCM1480_INT_MASK1(K_BCM1480_INT_GPIO_12)
+#define M_BCM1480_INT_GPIO_13 _BCM1480_INT_MASK1(K_BCM1480_INT_GPIO_13)
+#define M_BCM1480_INT_GPIO_14 _BCM1480_INT_MASK1(K_BCM1480_INT_GPIO_14)
+#define M_BCM1480_INT_GPIO_15 _BCM1480_INT_MASK1(K_BCM1480_INT_GPIO_15)
+
+/*
+ * Interrupt mappings (Table 18)
+ */
+
+#define K_BCM1480_INT_MAP_I0 0 /* interrupt pins on processor */
+#define K_BCM1480_INT_MAP_I1 1
+#define K_BCM1480_INT_MAP_I2 2
+#define K_BCM1480_INT_MAP_I3 3
+#define K_BCM1480_INT_MAP_I4 4
+#define K_BCM1480_INT_MAP_I5 5
+#define K_BCM1480_INT_MAP_NMI 6 /* nonmaskable */
+#define K_BCM1480_INT_MAP_DINT 7 /* debug interrupt */
+
+/*
+ * Interrupt LDT Set Register (Table 19)
+ */
+
+#define S_BCM1480_INT_HT_INTMSG 0
+#define M_BCM1480_INT_HT_INTMSG _SB_MAKEMASK(3,S_BCM1480_INT_HT_INTMSG)
+#define V_BCM1480_INT_HT_INTMSG(x) _SB_MAKEVALUE(x,S_BCM1480_INT_HT_INTMSG)
+#define G_BCM1480_INT_HT_INTMSG(x) _SB_GETVALUE(x,S_BCM1480_INT_HT_INTMSG,M_BCM1480_INT_HT_INTMSG)
+
+#define K_BCM1480_INT_HT_INTMSG_FIXED 0
+#define K_BCM1480_INT_HT_INTMSG_ARBITRATED 1
+#define K_BCM1480_INT_HT_INTMSG_SMI 2
+#define K_BCM1480_INT_HT_INTMSG_NMI 3
+#define K_BCM1480_INT_HT_INTMSG_INIT 4
+#define K_BCM1480_INT_HT_INTMSG_STARTUP 5
+#define K_BCM1480_INT_HT_INTMSG_EXTINT 6
+#define K_BCM1480_INT_HT_INTMSG_RESERVED 7
+
+#define M_BCM1480_INT_HT_TRIGGERMODE _SB_MAKEMASK1(3)
+#define V_BCM1480_INT_HT_EDGETRIGGER 0
+#define V_BCM1480_INT_HT_LEVELTRIGGER M_BCM1480_INT_HT_TRIGGERMODE
+
+#define M_BCM1480_INT_HT_DESTMODE _SB_MAKEMASK1(4)
+#define V_BCM1480_INT_HT_PHYSICALDEST 0
+#define V_BCM1480_INT_HT_LOGICALDEST M_BCM1480_INT_HT_DESTMODE
+
+#define S_BCM1480_INT_HT_INTDEST 5
+#define M_BCM1480_INT_HT_INTDEST _SB_MAKEMASK(8,S_BCM1480_INT_HT_INTDEST)
+#define V_BCM1480_INT_HT_INTDEST(x) _SB_MAKEVALUE(x,S_BCM1480_INT_HT_INTDEST)
+#define G_BCM1480_INT_HT_INTDEST(x) _SB_GETVALUE(x,S_BCM1480_INT_HT_INTDEST,M_BCM1480_INT_HT_INTDEST)
+
+#define S_BCM1480_INT_HT_VECTOR 13
+#define M_BCM1480_INT_HT_VECTOR _SB_MAKEMASK(8,S_BCM1480_INT_HT_VECTOR)
+#define V_BCM1480_INT_HT_VECTOR(x) _SB_MAKEVALUE(x,S_BCM1480_INT_HT_VECTOR)
+#define G_BCM1480_INT_HT_VECTOR(x) _SB_GETVALUE(x,S_BCM1480_INT_HT_VECTOR,M_BCM1480_INT_HT_VECTOR)
+
+/*
+ * Vector prefix (Table 4-7)
+ */
+
+#define M_BCM1480_HTVECT_RAISE_INTLDT_HIGH 0x00
+#define M_BCM1480_HTVECT_RAISE_MBOX_0 0x40
+#define M_BCM1480_HTVECT_RAISE_INTLDT_LO 0x80
+#define M_BCM1480_HTVECT_RAISE_MBOX_1 0xC0
+
+#endif /* _BCM1480_INT_H */
Index: lmo/include/asm-mips/sibyte/bcm1480_l2c.h
===================================================================
--- /dev/null 1970-01-01 00:00:00.000000000 +0000
+++ lmo/include/asm-mips/sibyte/bcm1480_l2c.h 2005-10-19 22:34:11.000000000 -0700
@@ -0,0 +1,176 @@
+/* *********************************************************************
+ * BCM1280/BCM1480 Board Support Package
+ *
+ * L2 Cache constants and macros File: bcm1480_l2c.h
+ *
+ * This module contains constants useful for manipulating the
+ * level 2 cache.
+ *
+ * BCM1400 specification level: 1280-UM100-D2 (11/14/03)
+ *
+ *********************************************************************
+ *
+ * Copyright 2000,2001,2002,2003
+ * Broadcom Corporation. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ ********************************************************************* */
+
+
+#ifndef _BCM1480_L2C_H
+#define _BCM1480_L2C_H
+
+#include "sb1250_defs.h"
+
+/*
+ * Format of level 2 cache management address (Table 55)
+ */
+
+#define S_BCM1480_L2C_MGMT_INDEX 5
+#define M_BCM1480_L2C_MGMT_INDEX _SB_MAKEMASK(12,S_BCM1480_L2C_MGMT_INDEX)
+#define V_BCM1480_L2C_MGMT_INDEX(x) _SB_MAKEVALUE(x,S_BCM1480_L2C_MGMT_INDEX)
+#define G_BCM1480_L2C_MGMT_INDEX(x) _SB_GETVALUE(x,S_BCM1480_L2C_MGMT_INDEX,M_BCM1480_L2C_MGMT_INDEX)
+
+#define S_BCM1480_L2C_MGMT_WAY 17
+#define M_BCM1480_L2C_MGMT_WAY _SB_MAKEMASK(3,S_BCM1480_L2C_MGMT_WAY)
+#define V_BCM1480_L2C_MGMT_WAY(x) _SB_MAKEVALUE(x,S_BCM1480_L2C_MGMT_WAY)
+#define G_BCM1480_L2C_MGMT_WAY(x) _SB_GETVALUE(x,S_BCM1480_L2C_MGMT_WAY,M_BCM1480_L2C_MGMT_WAY)
+
+#define M_BCM1480_L2C_MGMT_DIRTY _SB_MAKEMASK1(20)
+#define M_BCM1480_L2C_MGMT_VALID _SB_MAKEMASK1(21)
+
+#define S_BCM1480_L2C_MGMT_ECC_DIAG 22
+#define M_BCM1480_L2C_MGMT_ECC_DIAG _SB_MAKEMASK(2,S_BCM1480_L2C_MGMT_ECC_DIAG)
+#define V_BCM1480_L2C_MGMT_ECC_DIAG(x) _SB_MAKEVALUE(x,S_BCM1480_L2C_MGMT_ECC_DIAG)
+#define G_BCM1480_L2C_MGMT_ECC_DIAG(x) _SB_GETVALUE(x,S_BCM1480_L2C_MGMT_ECC_DIAG,M_BCM1480_L2C_MGMT_ECC_DIAG)
+
+#define A_BCM1480_L2C_MGMT_TAG_BASE 0x00D0000000
+
+#define BCM1480_L2C_ENTRIES_PER_WAY 4096
+#define BCM1480_L2C_NUM_WAYS 8
+
+
+/*
+ * Level 2 Cache Tag register (Table 59)
+ */
+
+#define S_BCM1480_L2C_TAG_MBZ 0
+#define M_BCM1480_L2C_TAG_MBZ _SB_MAKEMASK(5,S_BCM1480_L2C_TAG_MBZ)
+
+#define S_BCM1480_L2C_TAG_INDEX 5
+#define M_BCM1480_L2C_TAG_INDEX _SB_MAKEMASK(12,S_BCM1480_L2C_TAG_INDEX)
+#define V_BCM1480_L2C_TAG_INDEX(x) _SB_MAKEVALUE(x,S_BCM1480_L2C_TAG_INDEX)
+#define G_BCM1480_L2C_TAG_INDEX(x) _SB_GETVALUE(x,S_BCM1480_L2C_TAG_INDEX,M_BCM1480_L2C_TAG_INDEX)
+
+/* Note that index bit 16 is also tag bit 40 */
+#define S_BCM1480_L2C_TAG_TAG 17
+#define M_BCM1480_L2C_TAG_TAG _SB_MAKEMASK(23,S_BCM1480_L2C_TAG_TAG)
+#define V_BCM1480_L2C_TAG_TAG(x) _SB_MAKEVALUE(x,S_BCM1480_L2C_TAG_TAG)
+#define G_BCM1480_L2C_TAG_TAG(x) _SB_GETVALUE(x,S_BCM1480_L2C_TAG_TAG,M_BCM1480_L2C_TAG_TAG)
+
+#define S_BCM1480_L2C_TAG_ECC 40
+#define M_BCM1480_L2C_TAG_ECC _SB_MAKEMASK(6,S_BCM1480_L2C_TAG_ECC)
+#define V_BCM1480_L2C_TAG_ECC(x) _SB_MAKEVALUE(x,S_BCM1480_L2C_TAG_ECC)
+#define G_BCM1480_L2C_TAG_ECC(x) _SB_GETVALUE(x,S_BCM1480_L2C_TAG_ECC,M_BCM1480_L2C_TAG_ECC)
+
+#define S_BCM1480_L2C_TAG_WAY 46
+#define M_BCM1480_L2C_TAG_WAY _SB_MAKEMASK(3,S_BCM1480_L2C_TAG_WAY)
+#define V_BCM1480_L2C_TAG_WAY(x) _SB_MAKEVALUE(x,S_BCM1480_L2C_TAG_WAY)
+#define G_BCM1480_L2C_TAG_WAY(x) _SB_GETVALUE(x,S_BCM1480_L2C_TAG_WAY,M_BCM1480_L2C_TAG_WAY)
+
+#define M_BCM1480_L2C_TAG_DIRTY _SB_MAKEMASK1(49)
+#define M_BCM1480_L2C_TAG_VALID _SB_MAKEMASK1(50)
+
+#define S_BCM1480_L2C_DATA_ECC 51
+#define M_BCM1480_L2C_DATA_ECC _SB_MAKEMASK(10,S_BCM1480_L2C_DATA_ECC)
+#define V_BCM1480_L2C_DATA_ECC(x) _SB_MAKEVALUE(x,S_BCM1480_L2C_DATA_ECC)
+#define G_BCM1480_L2C_DATA_ECC(x) _SB_GETVALUE(x,S_BCM1480_L2C_DATA_ECC,M_BCM1480_L2C_DATA_ECC)
+
+
+/*
+ * L2 Misc0 Value Register (Table 60)
+ */
+
+#define S_BCM1480_L2C_MISC0_WAY_REMOTE 0
+#define M_BCM1480_L2C_MISC0_WAY_REMOTE _SB_MAKEMASK(8,S_BCM1480_L2C_MISC0_WAY_REMOTE)
+#define G_BCM1480_L2C_MISC0_WAY_REMOTE(x) _SB_GETVALUE(x,S_BCM1480_L2C_MISC0_WAY_REMOTE,M_BCM1480_L2C_MISC0_WAY_REMOTE)
+
+#define S_BCM1480_L2C_MISC0_WAY_LOCAL 8
+#define M_BCM1480_L2C_MISC0_WAY_LOCAL _SB_MAKEMASK(8,S_BCM1480_L2C_MISC0_WAY_LOCAL)
+#define G_BCM1480_L2C_MISC0_WAY_LOCAL(x) _SB_GETVALUE(x,S_BCM1480_L2C_MISC0_WAY_LOCAL,M_BCM1480_L2C_MISC0_WAY_LOCAL)
+
+#define S_BCM1480_L2C_MISC0_WAY_ENABLE 16
+#define M_BCM1480_L2C_MISC0_WAY_ENABLE _SB_MAKEMASK(8,S_BCM1480_L2C_MISC0_WAY_ENABLE)
+#define G_BCM1480_L2C_MISC0_WAY_ENABLE(x) _SB_GETVALUE(x,S_BCM1480_L2C_MISC0_WAY_ENABLE,M_BCM1480_L2C_MISC0_WAY_ENABLE)
+
+#define S_BCM1480_L2C_MISC0_CACHE_DISABLE 24
+#define M_BCM1480_L2C_MISC0_CACHE_DISABLE _SB_MAKEMASK(2,S_BCM1480_L2C_MISC0_CACHE_DISABLE)
+#define G_BCM1480_L2C_MISC0_CACHE_DISABLE(x) _SB_GETVALUE(x,S_BCM1480_L2C_MISC0_CACHE_DISABLE,M_BCM1480_L2C_MISC0_CACHE_DISABLE)
+
+#define S_BCM1480_L2C_MISC0_CACHE_QUAD 26
+#define M_BCM1480_L2C_MISC0_CACHE_QUAD _SB_MAKEMASK(2,S_BCM1480_L2C_MISC0_CACHE_QUAD)
+#define G_BCM1480_L2C_MISC0_CACHE_QUAD(x) _SB_GETVALUE(x,S_BCM1480_L2C_MISC0_CACHE_QUAD,M_BCM1480_L2C_MISC0_CACHE_QUAD)
+
+#define S_BCM1480_L2C_MISC0_MC_PRIORITY 30
+#define M_BCM1480_L2C_MISC0_MC_PRIORITY _SB_MAKEMASK1(S_BCM1480_L2C_MISC0_MC_PRIORITY)
+
+#define S_BCM1480_L2C_MISC0_ECC_CLEANUP 31
+#define M_BCM1480_L2C_MISC0_ECC_CLEANUP _SB_MAKEMASK1(S_BCM1480_L2C_MISC0_ECC_CLEANUP)
+
+
+/*
+ * L2 Misc1 Value Register (Table 60)
+ */
+
+#define S_BCM1480_L2C_MISC1_WAY_AGENT_0 0
+#define M_BCM1480_L2C_MISC1_WAY_AGENT_0 _SB_MAKEMASK(8,S_BCM1480_L2C_MISC1_WAY_AGENT_0)
+#define G_BCM1480_L2C_MISC1_WAY_AGENT_0(x) _SB_GETVALUE(x,S_BCM1480_L2C_MISC1_WAY_AGENT_0,M_BCM1480_L2C_MISC1_WAY_AGENT_0)
+
+#define S_BCM1480_L2C_MISC1_WAY_AGENT_1 8
+#define M_BCM1480_L2C_MISC1_WAY_AGENT_1 _SB_MAKEMASK(8,S_BCM1480_L2C_MISC1_WAY_AGENT_1)
+#define G_BCM1480_L2C_MISC1_WAY_AGENT_1(x) _SB_GETVALUE(x,S_BCM1480_L2C_MISC1_WAY_AGENT_1,M_BCM1480_L2C_MISC1_WAY_AGENT_1)
+
+#define S_BCM1480_L2C_MISC1_WAY_AGENT_2 16
+#define M_BCM1480_L2C_MISC1_WAY_AGENT_2 _SB_MAKEMASK(8,S_BCM1480_L2C_MISC1_WAY_AGENT_2)
+#define G_BCM1480_L2C_MISC1_WAY_AGENT_2(x) _SB_GETVALUE(x,S_BCM1480_L2C_MISC1_WAY_AGENT_2,M_BCM1480_L2C_MISC1_WAY_AGENT_2)
+
+#define S_BCM1480_L2C_MISC1_WAY_AGENT_3 24
+#define M_BCM1480_L2C_MISC1_WAY_AGENT_3 _SB_MAKEMASK(8,S_BCM1480_L2C_MISC1_WAY_AGENT_3)
+#define G_BCM1480_L2C_MISC1_WAY_AGENT_3(x) _SB_GETVALUE(x,S_BCM1480_L2C_MISC1_WAY_AGENT_3,M_BCM1480_L2C_MISC1_WAY_AGENT_3)
+
+#define S_BCM1480_L2C_MISC1_WAY_AGENT_4 32
+#define M_BCM1480_L2C_MISC1_WAY_AGENT_4 _SB_MAKEMASK(8,S_BCM1480_L2C_MISC1_WAY_AGENT_4)
+#define G_BCM1480_L2C_MISC1_WAY_AGENT_4(x) _SB_GETVALUE(x,S_BCM1480_L2C_MISC1_WAY_AGENT_4,M_BCM1480_L2C_MISC1_WAY_AGENT_4)
+
+
+/*
+ * L2 Misc2 Value Register (Table 60)
+ */
+
+#define S_BCM1480_L2C_MISC2_WAY_AGENT_8 0
+#define M_BCM1480_L2C_MISC2_WAY_AGENT_8 _SB_MAKEMASK(8,S_BCM1480_L2C_MISC2_WAY_AGENT_8)
+#define G_BCM1480_L2C_MISC2_WAY_AGENT_8(x) _SB_GETVALUE(x,S_BCM1480_L2C_MISC2_WAY_AGENT_8,M_BCM1480_L2C_MISC2_WAY_AGENT_8)
+
+#define S_BCM1480_L2C_MISC2_WAY_AGENT_9 8
+#define M_BCM1480_L2C_MISC2_WAY_AGENT_9 _SB_MAKEMASK(8,S_BCM1480_L2C_MISC2_WAY_AGENT_9)
+#define G_BCM1480_L2C_MISC2_WAY_AGENT_9(x) _SB_GETVALUE(x,S_BCM1480_L2C_MISC2_WAY_AGENT_9,M_BCM1480_L2C_MISC2_WAY_AGENT_9)
+
+#define S_BCM1480_L2C_MISC2_WAY_AGENT_A 16
+#define M_BCM1480_L2C_MISC2_WAY_AGENT_A _SB_MAKEMASK(8,S_BCM1480_L2C_MISC2_WAY_AGENT_A)
+#define G_BCM1480_L2C_MISC2_WAY_AGENT_A(x) _SB_GETVALUE(x,S_BCM1480_L2C_MISC2_WAY_AGENT_A,M_BCM1480_L2C_MISC2_WAY_AGENT_A)
+
+
+#endif /* _BCM1480_L2C_H */
Index: lmo/include/asm-mips/sibyte/bcm1480_mc.h
===================================================================
--- /dev/null 1970-01-01 00:00:00.000000000 +0000
+++ lmo/include/asm-mips/sibyte/bcm1480_mc.h 2005-10-19 22:34:11.000000000 -0700
@@ -0,0 +1,962 @@
+/* *********************************************************************
+ * BCM1280/BCM1480 Board Support Package
+ *
+ * Memory Controller constants File: bcm1480_mc.h
+ *
+ * This module contains constants and macros useful for
+ * programming the memory controller.
+ *
+ * BCM1400 specification level: 1280-UM100-D1 (11/14/03 Review Copy)
+ *
+ *********************************************************************
+ *
+ * Copyright 2000,2001,2002,2003
+ * Broadcom Corporation. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ ********************************************************************* */
+
+
+#ifndef _BCM1480_MC_H
+#define _BCM1480_MC_H
+
+#include "sb1250_defs.h"
+
+/*
+ * Memory Channel Configuration Register (Table 81)
+ */
+
+#define S_BCM1480_MC_INTLV0 0
+#define M_BCM1480_MC_INTLV0 _SB_MAKEMASK(6,S_BCM1480_MC_INTLV0)
+#define V_BCM1480_MC_INTLV0(x) _SB_MAKEVALUE(x,S_BCM1480_MC_INTLV0)
+#define G_BCM1480_MC_INTLV0(x) _SB_GETVALUE(x,S_BCM1480_MC_INTLV0,M_BCM1480_MC_INTLV0)
+#define V_BCM1480_MC_INTLV0_DEFAULT V_BCM1480_MC_INTLV0(0)
+
+#define S_BCM1480_MC_INTLV1 8
+#define M_BCM1480_MC_INTLV1 _SB_MAKEMASK(6,S_BCM1480_MC_INTLV1)
+#define V_BCM1480_MC_INTLV1(x) _SB_MAKEVALUE(x,S_BCM1480_MC_INTLV1)
+#define G_BCM1480_MC_INTLV1(x) _SB_GETVALUE(x,S_BCM1480_MC_INTLV1,M_BCM1480_MC_INTLV1)
+#define V_BCM1480_MC_INTLV1_DEFAULT V_BCM1480_MC_INTLV1(0)
+
+#define S_BCM1480_MC_INTLV2 16
+#define M_BCM1480_MC_INTLV2 _SB_MAKEMASK(6,S_BCM1480_MC_INTLV2)
+#define V_BCM1480_MC_INTLV2(x) _SB_MAKEVALUE(x,S_BCM1480_MC_INTLV2)
+#define G_BCM1480_MC_INTLV2(x) _SB_GETVALUE(x,S_BCM1480_MC_INTLV2,M_BCM1480_MC_INTLV2)
+#define V_BCM1480_MC_INTLV2_DEFAULT V_BCM1480_MC_INTLV2(0)
+
+#define S_BCM1480_MC_CS_MODE 32
+#define M_BCM1480_MC_CS_MODE _SB_MAKEMASK(8,S_BCM1480_MC_CS_MODE)
+#define V_BCM1480_MC_CS_MODE(x) _SB_MAKEVALUE(x,S_BCM1480_MC_CS_MODE)
+#define G_BCM1480_MC_CS_MODE(x) _SB_GETVALUE(x,S_BCM1480_MC_CS_MODE,M_BCM1480_MC_CS_MODE)
+#define V_BCM1480_MC_CS_MODE_DEFAULT V_BCM1480_MC_CS_MODE(0)
+
+#define V_BCM1480_MC_CONFIG_DEFAULT (V_BCM1480_MC_INTLV0_DEFAULT | \
+ V_BCM1480_MC_INTLV1_DEFAULT | \
+ V_BCM1480_MC_INTLV2_DEFAULT | \
+ V_BCM1480_MC_CS_MODE_DEFAULT)
+
+#define K_BCM1480_MC_CS01_MODE 0x03
+#define K_BCM1480_MC_CS02_MODE 0x05
+#define K_BCM1480_MC_CS0123_MODE 0x0F
+#define K_BCM1480_MC_CS0246_MODE 0x55
+#define K_BCM1480_MC_CS0145_MODE 0x33
+#define K_BCM1480_MC_CS0167_MODE 0xC3
+#define K_BCM1480_MC_CSFULL_MODE 0xFF
+
+/*
+ * Chip Select Start Address Register (Table 82)
+ */
+
+#define S_BCM1480_MC_CS0_START 0
+#define M_BCM1480_MC_CS0_START _SB_MAKEMASK(12,S_BCM1480_MC_CS0_START)
+#define V_BCM1480_MC_CS0_START(x) _SB_MAKEVALUE(x,S_BCM1480_MC_CS0_START)
+#define G_BCM1480_MC_CS0_START(x) _SB_GETVALUE(x,S_BCM1480_MC_CS0_START,M_BCM1480_MC_CS0_START)
+
+#define S_BCM1480_MC_CS1_START 16
+#define M_BCM1480_MC_CS1_START _SB_MAKEMASK(12,S_BCM1480_MC_CS1_START)
+#define V_BCM1480_MC_CS1_START(x) _SB_MAKEVALUE(x,S_BCM1480_MC_CS1_START)
+#define G_BCM1480_MC_CS1_START(x) _SB_GETVALUE(x,S_BCM1480_MC_CS1_START,M_BCM1480_MC_CS1_START)
+
+#define S_BCM1480_MC_CS2_START 32
+#define M_BCM1480_MC_CS2_START _SB_MAKEMASK(12,S_BCM1480_MC_CS2_START)
+#define V_BCM1480_MC_CS2_START(x) _SB_MAKEVALUE(x,S_BCM1480_MC_CS2_START)
+#define G_BCM1480_MC_CS2_START(x) _SB_GETVALUE(x,S_BCM1480_MC_CS2_START,M_BCM1480_MC_CS2_START)
+
+#define S_BCM1480_MC_CS3_START 48
+#define M_BCM1480_MC_CS3_START _SB_MAKEMASK(12,S_BCM1480_MC_CS3_START)
+#define V_BCM1480_MC_CS3_START(x) _SB_MAKEVALUE(x,S_BCM1480_MC_CS3_START)
+#define G_BCM1480_MC_CS3_START(x) _SB_GETVALUE(x,S_BCM1480_MC_CS3_START,M_BCM1480_MC_CS3_START)
+
+/*
+ * Chip Select End Address Register (Table 83)
+ */
+
+#define S_BCM1480_MC_CS0_END 0
+#define M_BCM1480_MC_CS0_END _SB_MAKEMASK(12,S_BCM1480_MC_CS0_END)
+#define V_BCM1480_MC_CS0_END(x) _SB_MAKEVALUE(x,S_BCM1480_MC_CS0_END)
+#define G_BCM1480_MC_CS0_END(x) _SB_GETVALUE(x,S_BCM1480_MC_CS0_END,M_BCM1480_MC_CS0_END)
+
+#define S_BCM1480_MC_CS1_END 16
+#define M_BCM1480_MC_CS1_END _SB_MAKEMASK(12,S_BCM1480_MC_CS1_END)
+#define V_BCM1480_MC_CS1_END(x) _SB_MAKEVALUE(x,S_BCM1480_MC_CS1_END)
+#define G_BCM1480_MC_CS1_END(x) _SB_GETVALUE(x,S_BCM1480_MC_CS1_END,M_BCM1480_MC_CS1_END)
+
+#define S_BCM1480_MC_CS2_END 32
+#define M_BCM1480_MC_CS2_END _SB_MAKEMASK(12,S_BCM1480_MC_CS2_END)
+#define V_BCM1480_MC_CS2_END(x) _SB_MAKEVALUE(x,S_BCM1480_MC_CS2_END)
+#define G_BCM1480_MC_CS2_END(x) _SB_GETVALUE(x,S_BCM1480_MC_CS2_END,M_BCM1480_MC_CS2_END)
+
+#define S_BCM1480_MC_CS3_END 48
+#define M_BCM1480_MC_CS3_END _SB_MAKEMASK(12,S_BCM1480_MC_CS3_END)
+#define V_BCM1480_MC_CS3_END(x) _SB_MAKEVALUE(x,S_BCM1480_MC_CS3_END)
+#define G_BCM1480_MC_CS3_END(x) _SB_GETVALUE(x,S_BCM1480_MC_CS3_END,M_BCM1480_MC_CS3_END)
+
+/*
+ * Row Address Bit Select Register 0 (Table 84)
+ */
+
+#define S_BCM1480_MC_ROW00 0
+#define M_BCM1480_MC_ROW00 _SB_MAKEMASK(6,S_BCM1480_MC_ROW00)
+#define V_BCM1480_MC_ROW00(x) _SB_MAKEVALUE(x,S_BCM1480_MC_ROW00)
+#define G_BCM1480_MC_ROW00(x) _SB_GETVALUE(x,S_BCM1480_MC_ROW00,M_BCM1480_MC_ROW00)
+
+#define S_BCM1480_MC_ROW01 8
+#define M_BCM1480_MC_ROW01 _SB_MAKEMASK(6,S_BCM1480_MC_ROW01)
+#define V_BCM1480_MC_ROW01(x) _SB_MAKEVALUE(x,S_BCM1480_MC_ROW01)
+#define G_BCM1480_MC_ROW01(x) _SB_GETVALUE(x,S_BCM1480_MC_ROW01,M_BCM1480_MC_ROW01)
+
+#define S_BCM1480_MC_ROW02 16
+#define M_BCM1480_MC_ROW02 _SB_MAKEMASK(6,S_BCM1480_MC_ROW02)
+#define V_BCM1480_MC_ROW02(x) _SB_MAKEVALUE(x,S_BCM1480_MC_ROW02)
+#define G_BCM1480_MC_ROW02(x) _SB_GETVALUE(x,S_BCM1480_MC_ROW02,M_BCM1480_MC_ROW02)
+
+#define S_BCM1480_MC_ROW03 24
+#define M_BCM1480_MC_ROW03 _SB_MAKEMASK(6,S_BCM1480_MC_ROW03)
+#define V_BCM1480_MC_ROW03(x) _SB_MAKEVALUE(x,S_BCM1480_MC_ROW03)
+#define G_BCM1480_MC_ROW03(x) _SB_GETVALUE(x,S_BCM1480_MC_ROW03,M_BCM1480_MC_ROW03)
+
+#define S_BCM1480_MC_ROW04 32
+#define M_BCM1480_MC_ROW04 _SB_MAKEMASK(6,S_BCM1480_MC_ROW04)
+#define V_BCM1480_MC_ROW04(x) _SB_MAKEVALUE(x,S_BCM1480_MC_ROW04)
+#define G_BCM1480_MC_ROW04(x) _SB_GETVALUE(x,S_BCM1480_MC_ROW04,M_BCM1480_MC_ROW04)
+
+#define S_BCM1480_MC_ROW05 40
+#define M_BCM1480_MC_ROW05 _SB_MAKEMASK(6,S_BCM1480_MC_ROW05)
+#define V_BCM1480_MC_ROW05(x) _SB_MAKEVALUE(x,S_BCM1480_MC_ROW05)
+#define G_BCM1480_MC_ROW05(x) _SB_GETVALUE(x,S_BCM1480_MC_ROW05,M_BCM1480_MC_ROW05)
+
+#define S_BCM1480_MC_ROW06 48
+#define M_BCM1480_MC_ROW06 _SB_MAKEMASK(6,S_BCM1480_MC_ROW06)
+#define V_BCM1480_MC_ROW06(x) _SB_MAKEVALUE(x,S_BCM1480_MC_ROW06)
+#define G_BCM1480_MC_ROW06(x) _SB_GETVALUE(x,S_BCM1480_MC_ROW06,M_BCM1480_MC_ROW06)
+
+#define S_BCM1480_MC_ROW07 56
+#define M_BCM1480_MC_ROW07 _SB_MAKEMASK(6,S_BCM1480_MC_ROW07)
+#define V_BCM1480_MC_ROW07(x) _SB_MAKEVALUE(x,S_BCM1480_MC_ROW07)
+#define G_BCM1480_MC_ROW07(x) _SB_GETVALUE(x,S_BCM1480_MC_ROW07,M_BCM1480_MC_ROW07)
+
+/*
+ * Row Address Bit Select Register 1 (Table 85)
+ */
+
+#define S_BCM1480_MC_ROW08 0
+#define M_BCM1480_MC_ROW08 _SB_MAKEMASK(6,S_BCM1480_MC_ROW08)
+#define V_BCM1480_MC_ROW08(x) _SB_MAKEVALUE(x,S_BCM1480_MC_ROW08)
+#define G_BCM1480_MC_ROW08(x) _SB_GETVALUE(x,S_BCM1480_MC_ROW08,M_BCM1480_MC_ROW08)
+
+#define S_BCM1480_MC_ROW09 8
+#define M_BCM1480_MC_ROW09 _SB_MAKEMASK(6,S_BCM1480_MC_ROW09)
+#define V_BCM1480_MC_ROW09(x) _SB_MAKEVALUE(x,S_BCM1480_MC_ROW09)
+#define G_BCM1480_MC_ROW09(x) _SB_GETVALUE(x,S_BCM1480_MC_ROW09,M_BCM1480_MC_ROW09)
+
+#define S_BCM1480_MC_ROW10 16
+#define M_BCM1480_MC_ROW10 _SB_MAKEMASK(6,S_BCM1480_MC_ROW10)
+#define V_BCM1480_MC_ROW10(x) _SB_MAKEVALUE(x,S_BCM1480_MC_ROW10)
+#define G_BCM1480_MC_ROW10(x) _SB_GETVALUE(x,S_BCM1480_MC_ROW10,M_BCM1480_MC_ROW10)
+
+#define S_BCM1480_MC_ROW11 24
+#define M_BCM1480_MC_ROW11 _SB_MAKEMASK(6,S_BCM1480_MC_ROW11)
+#define V_BCM1480_MC_ROW11(x) _SB_MAKEVALUE(x,S_BCM1480_MC_ROW11)
+#define G_BCM1480_MC_ROW11(x) _SB_GETVALUE(x,S_BCM1480_MC_ROW11,M_BCM1480_MC_ROW11)
+
+#define S_BCM1480_MC_ROW12 32
+#define M_BCM1480_MC_ROW12 _SB_MAKEMASK(6,S_BCM1480_MC_ROW12)
+#define V_BCM1480_MC_ROW12(x) _SB_MAKEVALUE(x,S_BCM1480_MC_ROW12)
+#define G_BCM1480_MC_ROW12(x) _SB_GETVALUE(x,S_BCM1480_MC_ROW12,M_BCM1480_MC_ROW12)
+
+#define S_BCM1480_MC_ROW13 40
+#define M_BCM1480_MC_ROW13 _SB_MAKEMASK(6,S_BCM1480_MC_ROW13)
+#define V_BCM1480_MC_ROW13(x) _SB_MAKEVALUE(x,S_BCM1480_MC_ROW13)
+#define G_BCM1480_MC_ROW13(x) _SB_GETVALUE(x,S_BCM1480_MC_ROW13,M_BCM1480_MC_ROW13)
+
+#define S_BCM1480_MC_ROW14 48
+#define M_BCM1480_MC_ROW14 _SB_MAKEMASK(6,S_BCM1480_MC_ROW14)
+#define V_BCM1480_MC_ROW14(x) _SB_MAKEVALUE(x,S_BCM1480_MC_ROW14)
+#define G_BCM1480_MC_ROW14(x) _SB_GETVALUE(x,S_BCM1480_MC_ROW14,M_BCM1480_MC_ROW14)
+
+#define K_BCM1480_MC_ROWX_BIT_SPACING 8
+
+/*
+ * Column Address Bit Select Register 0 (Table 86)
+ */
+
+#define S_BCM1480_MC_COL00 0
+#define M_BCM1480_MC_COL00 _SB_MAKEMASK(6,S_BCM1480_MC_COL00)
+#define V_BCM1480_MC_COL00(x) _SB_MAKEVALUE(x,S_BCM1480_MC_COL00)
+#define G_BCM1480_MC_COL00(x) _SB_GETVALUE(x,S_BCM1480_MC_COL00,M_BCM1480_MC_COL00)
+
+#define S_BCM1480_MC_COL01 8
+#define M_BCM1480_MC_COL01 _SB_MAKEMASK(6,S_BCM1480_MC_COL01)
+#define V_BCM1480_MC_COL01(x) _SB_MAKEVALUE(x,S_BCM1480_MC_COL01)
+#define G_BCM1480_MC_COL01(x) _SB_GETVALUE(x,S_BCM1480_MC_COL01,M_BCM1480_MC_COL01)
+
+#define S_BCM1480_MC_COL02 16
+#define M_BCM1480_MC_COL02 _SB_MAKEMASK(6,S_BCM1480_MC_COL02)
+#define V_BCM1480_MC_COL02(x) _SB_MAKEVALUE(x,S_BCM1480_MC_COL02)
+#define G_BCM1480_MC_COL02(x) _SB_GETVALUE(x,S_BCM1480_MC_COL02,M_BCM1480_MC_COL02)
+
+#define S_BCM1480_MC_COL03 24
+#define M_BCM1480_MC_COL03 _SB_MAKEMASK(6,S_BCM1480_MC_COL03)
+#define V_BCM1480_MC_COL03(x) _SB_MAKEVALUE(x,S_BCM1480_MC_COL03)
+#define G_BCM1480_MC_COL03(x) _SB_GETVALUE(x,S_BCM1480_MC_COL03,M_BCM1480_MC_COL03)
+
+#define S_BCM1480_MC_COL04 32
+#define M_BCM1480_MC_COL04 _SB_MAKEMASK(6,S_BCM1480_MC_COL04)
+#define V_BCM1480_MC_COL04(x) _SB_MAKEVALUE(x,S_BCM1480_MC_COL04)
+#define G_BCM1480_MC_COL04(x) _SB_GETVALUE(x,S_BCM1480_MC_COL04,M_BCM1480_MC_COL04)
+
+#define S_BCM1480_MC_COL05 40
+#define M_BCM1480_MC_COL05 _SB_MAKEMASK(6,S_BCM1480_MC_COL05)
+#define V_BCM1480_MC_COL05(x) _SB_MAKEVALUE(x,S_BCM1480_MC_COL05)
+#define G_BCM1480_MC_COL05(x) _SB_GETVALUE(x,S_BCM1480_MC_COL05,M_BCM1480_MC_COL05)
+
+#define S_BCM1480_MC_COL06 48
+#define M_BCM1480_MC_COL06 _SB_MAKEMASK(6,S_BCM1480_MC_COL06)
+#define V_BCM1480_MC_COL06(x) _SB_MAKEVALUE(x,S_BCM1480_MC_COL06)
+#define G_BCM1480_MC_COL06(x) _SB_GETVALUE(x,S_BCM1480_MC_COL06,M_BCM1480_MC_COL06)
+
+#define S_BCM1480_MC_COL07 56
+#define M_BCM1480_MC_COL07 _SB_MAKEMASK(6,S_BCM1480_MC_COL07)
+#define V_BCM1480_MC_COL07(x) _SB_MAKEVALUE(x,S_BCM1480_MC_COL07)
+#define G_BCM1480_MC_COL07(x) _SB_GETVALUE(x,S_BCM1480_MC_COL07,M_BCM1480_MC_COL07)
+
+/*
+ * Column Address Bit Select Register 1 (Table 87)
+ */
+
+#define S_BCM1480_MC_COL08 0
+#define M_BCM1480_MC_COL08 _SB_MAKEMASK(6,S_BCM1480_MC_COL08)
+#define V_BCM1480_MC_COL08(x) _SB_MAKEVALUE(x,S_BCM1480_MC_COL08)
+#define G_BCM1480_MC_COL08(x) _SB_GETVALUE(x,S_BCM1480_MC_COL08,M_BCM1480_MC_COL08)
+
+#define S_BCM1480_MC_COL09 8
+#define M_BCM1480_MC_COL09 _SB_MAKEMASK(6,S_BCM1480_MC_COL09)
+#define V_BCM1480_MC_COL09(x) _SB_MAKEVALUE(x,S_BCM1480_MC_COL09)
+#define G_BCM1480_MC_COL09(x) _SB_GETVALUE(x,S_BCM1480_MC_COL09,M_BCM1480_MC_COL09)
+
+#define S_BCM1480_MC_COL10 16 /* not a valid position, must be prog as 0 */
+
+#define S_BCM1480_MC_COL11 24
+#define M_BCM1480_MC_COL11 _SB_MAKEMASK(6,S_BCM1480_MC_COL11)
+#define V_BCM1480_MC_COL11(x) _SB_MAKEVALUE(x,S_BCM1480_MC_COL11)
+#define G_BCM1480_MC_COL11(x) _SB_GETVALUE(x,S_BCM1480_MC_COL11,M_BCM1480_MC_COL11)
+
+#define S_BCM1480_MC_COL12 32
+#define M_BCM1480_MC_COL12 _SB_MAKEMASK(6,S_BCM1480_MC_COL12)
+#define V_BCM1480_MC_COL12(x) _SB_MAKEVALUE(x,S_BCM1480_MC_COL12)
+#define G_BCM1480_MC_COL12(x) _SB_GETVALUE(x,S_BCM1480_MC_COL12,M_BCM1480_MC_COL12)
+
+#define S_BCM1480_MC_COL13 40
+#define M_BCM1480_MC_COL13 _SB_MAKEMASK(6,S_BCM1480_MC_COL13)
+#define V_BCM1480_MC_COL13(x) _SB_MAKEVALUE(x,S_BCM1480_MC_COL13)
+#define G_BCM1480_MC_COL13(x) _SB_GETVALUE(x,S_BCM1480_MC_COL13,M_BCM1480_MC_COL13)
+
+#define S_BCM1480_MC_COL14 48
+#define M_BCM1480_MC_COL14 _SB_MAKEMASK(6,S_BCM1480_MC_COL14)
+#define V_BCM1480_MC_COL14(x) _SB_MAKEVALUE(x,S_BCM1480_MC_COL14)
+#define G_BCM1480_MC_COL14(x) _SB_GETVALUE(x,S_BCM1480_MC_COL14,M_BCM1480_MC_COL14)
+
+#define K_BCM1480_MC_COLX_BIT_SPACING 8
+
+/*
+ * CS0 and CS1 Bank Address Bit Select Register (Table 88)
+ */
+
+#define S_BCM1480_MC_CS01_BANK0 0
+#define M_BCM1480_MC_CS01_BANK0 _SB_MAKEMASK(6,S_BCM1480_MC_CS01_BANK0)
+#define V_BCM1480_MC_CS01_BANK0(x) _SB_MAKEVALUE(x,S_BCM1480_MC_CS01_BANK0)
+#define G_BCM1480_MC_CS01_BANK0(x) _SB_GETVALUE(x,S_BCM1480_MC_CS01_BANK0,M_BCM1480_MC_CS01_BANK0)
+
+#define S_BCM1480_MC_CS01_BANK1 8
+#define M_BCM1480_MC_CS01_BANK1 _SB_MAKEMASK(6,S_BCM1480_MC_CS01_BANK1)
+#define V_BCM1480_MC_CS01_BANK1(x) _SB_MAKEVALUE(x,S_BCM1480_MC_CS01_BANK1)
+#define G_BCM1480_MC_CS01_BANK1(x) _SB_GETVALUE(x,S_BCM1480_MC_CS01_BANK1,M_BCM1480_MC_CS01_BANK1)
+
+#define S_BCM1480_MC_CS01_BANK2 16
+#define M_BCM1480_MC_CS01_BANK2 _SB_MAKEMASK(6,S_BCM1480_MC_CS01_BANK2)
+#define V_BCM1480_MC_CS01_BANK2(x) _SB_MAKEVALUE(x,S_BCM1480_MC_CS01_BANK2)
+#define G_BCM1480_MC_CS01_BANK2(x) _SB_GETVALUE(x,S_BCM1480_MC_CS01_BANK2,M_BCM1480_MC_CS01_BANK2)
+
+/*
+ * CS2 and CS3 Bank Address Bit Select Register (Table 89)
+ */
+
+#define S_BCM1480_MC_CS23_BANK0 0
+#define M_BCM1480_MC_CS23_BANK0 _SB_MAKEMASK(6,S_BCM1480_MC_CS23_BANK0)
+#define V_BCM1480_MC_CS23_BANK0(x) _SB_MAKEVALUE(x,S_BCM1480_MC_CS23_BANK0)
+#define G_BCM1480_MC_CS23_BANK0(x) _SB_GETVALUE(x,S_BCM1480_MC_CS23_BANK0,M_BCM1480_MC_CS23_BANK0)
+
+#define S_BCM1480_MC_CS23_BANK1 8
+#define M_BCM1480_MC_CS23_BANK1 _SB_MAKEMASK(6,S_BCM1480_MC_CS23_BANK1)
+#define V_BCM1480_MC_CS23_BANK1(x) _SB_MAKEVALUE(x,S_BCM1480_MC_CS23_BANK1)
+#define G_BCM1480_MC_CS23_BANK1(x) _SB_GETVALUE(x,S_BCM1480_MC_CS23_BANK1,M_BCM1480_MC_CS23_BANK1)
+
+#define S_BCM1480_MC_CS23_BANK2 16
+#define M_BCM1480_MC_CS23_BANK2 _SB_MAKEMASK(6,S_BCM1480_MC_CS23_BANK2)
+#define V_BCM1480_MC_CS23_BANK2(x) _SB_MAKEVALUE(x,S_BCM1480_MC_CS23_BANK2)
+#define G_BCM1480_MC_CS23_BANK2(x) _SB_GETVALUE(x,S_BCM1480_MC_CS23_BANK2,M_BCM1480_MC_CS23_BANK2)
+
+#define K_BCM1480_MC_CSXX_BANKX_BIT_SPACING 8
+
+/*
+ * DRAM Command Register (Table 90)
+ */
+
+#define S_BCM1480_MC_COMMAND 0
+#define M_BCM1480_MC_COMMAND _SB_MAKEMASK(4,S_BCM1480_MC_COMMAND)
+#define V_BCM1480_MC_COMMAND(x) _SB_MAKEVALUE(x,S_BCM1480_MC_COMMAND)
+#define G_BCM1480_MC_COMMAND(x) _SB_GETVALUE(x,S_BCM1480_MC_COMMAND,M_BCM1480_MC_COMMAND)
+
+#define K_BCM1480_MC_COMMAND_EMRS 0
+#define K_BCM1480_MC_COMMAND_MRS 1
+#define K_BCM1480_MC_COMMAND_PRE 2
+#define K_BCM1480_MC_COMMAND_AR 3
+#define K_BCM1480_MC_COMMAND_SETRFSH 4
+#define K_BCM1480_MC_COMMAND_CLRRFSH 5
+#define K_BCM1480_MC_COMMAND_SETPWRDN 6
+#define K_BCM1480_MC_COMMAND_CLRPWRDN 7
+
+#if SIBYTE_HDR_FEATURE(1480, PASS2)
+#define K_BCM1480_MC_COMMAND_EMRS2 8
+#define K_BCM1480_MC_COMMAND_EMRS3 9
+#define K_BCM1480_MC_COMMAND_ENABLE_MCLK 10
+#define K_BCM1480_MC_COMMAND_DISABLE_MCLK 11
+#endif
+
+#define V_BCM1480_MC_COMMAND_EMRS V_BCM1480_MC_COMMAND(K_BCM1480_MC_COMMAND_EMRS)
+#define V_BCM1480_MC_COMMAND_MRS V_BCM1480_MC_COMMAND(K_BCM1480_MC_COMMAND_MRS)
+#define V_BCM1480_MC_COMMAND_PRE V_BCM1480_MC_COMMAND(K_BCM1480_MC_COMMAND_PRE)
+#define V_BCM1480_MC_COMMAND_AR V_BCM1480_MC_COMMAND(K_BCM1480_MC_COMMAND_AR)
+#define V_BCM1480_MC_COMMAND_SETRFSH V_BCM1480_MC_COMMAND(K_BCM1480_MC_COMMAND_SETRFSH)
+#define V_BCM1480_MC_COMMAND_CLRRFSH V_BCM1480_MC_COMMAND(K_BCM1480_MC_COMMAND_CLRRFSH)
+#define V_BCM1480_MC_COMMAND_SETPWRDN V_BCM1480_MC_COMMAND(K_BCM1480_MC_COMMAND_SETPWRDN)
+#define V_BCM1480_MC_COMMAND_CLRPWRDN V_BCM1480_MC_COMMAND(K_BCM1480_MC_COMMAND_CLRPWRDN)
+
+#if SIBYTE_HDR_FEATURE(1480, PASS2)
+#define V_BCM1480_MC_COMMAND_EMRS2 V_BCM1480_MC_COMMAND(K_BCM1480_MC_COMMAND_EMRS2)
+#define V_BCM1480_MC_COMMAND_EMRS3 V_BCM1480_MC_COMMAND(K_BCM1480_MC_COMMAND_EMRS3)
+#define V_BCM1480_MC_COMMAND_ENABLE_MCLK V_BCM1480_MC_COMMAND(K_BCM1480_MC_COMMAND_ENABLE_MCLK)
+#define V_BCM1480_MC_COMMAND_DISABLE_MCLK V_BCM1480_MC_COMMAND(K_BCM1480_MC_COMMAND_DISABLE_MCLK)
+#endif
+
+#define S_BCM1480_MC_CS0 4
+#define M_BCM1480_MC_CS0 _SB_MAKEMASK1(4)
+#define M_BCM1480_MC_CS1 _SB_MAKEMASK1(5)
+#define M_BCM1480_MC_CS2 _SB_MAKEMASK1(6)
+#define M_BCM1480_MC_CS3 _SB_MAKEMASK1(7)
+#define M_BCM1480_MC_CS4 _SB_MAKEMASK1(8)
+#define M_BCM1480_MC_CS5 _SB_MAKEMASK1(9)
+#define M_BCM1480_MC_CS6 _SB_MAKEMASK1(10)
+#define M_BCM1480_MC_CS7 _SB_MAKEMASK1(11)
+
+#define M_BCM1480_MC_CMD_ACTIVE _SB_MAKEMASK1(16)
+
+/*
+ * DRAM Mode Register (Table 91)
+ */
+
+#define S_BCM1480_MC_EMODE 0
+#define M_BCM1480_MC_EMODE _SB_MAKEMASK(15,S_BCM1480_MC_EMODE)
+#define V_BCM1480_MC_EMODE(x) _SB_MAKEVALUE(x,S_BCM1480_MC_EMODE)
+#define G_BCM1480_MC_EMODE(x) _SB_GETVALUE(x,S_BCM1480_MC_EMODE,M_BCM1480_MC_EMODE)
+#define V_BCM1480_MC_EMODE_DEFAULT V_BCM1480_MC_EMODE(0)
+
+#define S_BCM1480_MC_MODE 16
+#define M_BCM1480_MC_MODE _SB_MAKEMASK(15,S_BCM1480_MC_MODE)
+#define V_BCM1480_MC_MODE(x) _SB_MAKEVALUE(x,S_BCM1480_MC_MODE)
+#define G_BCM1480_MC_MODE(x) _SB_GETVALUE(x,S_BCM1480_MC_MODE,M_BCM1480_MC_MODE)
+#define V_BCM1480_MC_MODE_DEFAULT V_BCM1480_MC_MODE(0)
+
+#define S_BCM1480_MC_DRAM_TYPE 32
+#define M_BCM1480_MC_DRAM_TYPE _SB_MAKEMASK(4,S_BCM1480_MC_DRAM_TYPE)
+#define V_BCM1480_MC_DRAM_TYPE(x) _SB_MAKEVALUE(x,S_BCM1480_MC_DRAM_TYPE)
+#define G_BCM1480_MC_DRAM_TYPE(x) _SB_GETVALUE(x,S_BCM1480_MC_DRAM_TYPE,M_BCM1480_MC_DRAM_TYPE)
+
+#define K_BCM1480_MC_DRAM_TYPE_JEDEC 0
+#define K_BCM1480_MC_DRAM_TYPE_FCRAM 1
+
+#if SIBYTE_HDR_FEATURE(1480, PASS2)
+#define K_BCM1480_MC_DRAM_TYPE_DDR2 2
+#endif
+
+#define V_BCM1480_MC_DRAM_TYPE_JEDEC V_BCM1480_MC_DRAM_TYPE(K_BCM1480_MC_DRAM_TYPE_JEDEC)
+#define V_BCM1480_MC_DRAM_TYPE_FCRAM V_BCM1480_MC_DRAM_TYPE(K_BCM1480_MC_DRAM_TYPE_FCRAM)
+
+#if SIBYTE_HDR_FEATURE(1480, PASS2)
+#define V_BCM1480_MC_DRAM_TYPE_DDR2 V_BCM1480_MC_DRAM_TYPE(K_BCM1480_MC_DRAM_TYPE_DDR2)
+#endif
+
+#define M_BCM1480_MC_GANGED _SB_MAKEMASK1(36)
+#define M_BCM1480_MC_BY9_INTF _SB_MAKEMASK1(37)
+#define M_BCM1480_MC_FORCE_ECC64 _SB_MAKEMASK1(38)
+#define M_BCM1480_MC_ECC_DISABLE _SB_MAKEMASK1(39)
+
+#define S_BCM1480_MC_PG_POLICY 40
+#define M_BCM1480_MC_PG_POLICY _SB_MAKEMASK(2,S_BCM1480_MC_PG_POLICY)
+#define V_BCM1480_MC_PG_POLICY(x) _SB_MAKEVALUE(x,S_BCM1480_MC_PG_POLICY)
+#define G_BCM1480_MC_PG_POLICY(x) _SB_GETVALUE(x,S_BCM1480_MC_PG_POLICY,M_BCM1480_MC_PG_POLICY)
+
+#define K_BCM1480_MC_PG_POLICY_CLOSED 0
+#define K_BCM1480_MC_PG_POLICY_CAS_TIME_CHK 1
+
+#define V_BCM1480_MC_PG_POLICY_CLOSED V_BCM1480_MC_PG_POLICY(K_BCM1480_MC_PG_POLICY_CLOSED)
+#define V_BCM1480_MC_PG_POLICY_CAS_TIME_CHK V_BCM1480_MC_PG_POLICY(K_BCM1480_MC_PG_POLICY_CAS_TIME_CHK)
+
+#if SIBYTE_HDR_FEATURE(1480, PASS2)
+#define M_BCM1480_MC_2T_CMD _SB_MAKEMASK1(42)
+#define M_BCM1480_MC_ECC_COR_DIS _SB_MAKEMASK1(43)
+#endif
+
+#define V_BCM1480_MC_DRAMMODE_DEFAULT V_BCM1480_MC_EMODE_DEFAULT | V_BCM1480_MC_MODE_DEFAULT | V_BCM1480_MC_DRAM_TYPE_JEDEC | \
+ V_BCM1480_MC_PG_POLICY(K_BCM1480_MC_PG_POLICY_CAS_TIME_CHK)
+
+/*
+ * Memory Clock Configuration Register (Table 92)
+ */
+
+#define S_BCM1480_MC_CLK_RATIO 0
+#define M_BCM1480_MC_CLK_RATIO _SB_MAKEMASK(6,S_BCM1480_MC_CLK_RATIO)
+#define V_BCM1480_MC_CLK_RATIO(x) _SB_MAKEVALUE(x,S_BCM1480_MC_CLK_RATIO)
+#define G_BCM1480_MC_CLK_RATIO(x) _SB_GETVALUE(x,S_BCM1480_MC_CLK_RATIO,M_BCM1480_MC_CLK_RATIO)
+
+#define V_BCM1480_MC_CLK_RATIO_DEFAULT V_BCM1480_MC_CLK_RATIO(10)
+
+#define S_BCM1480_MC_REF_RATE 8
+#define M_BCM1480_MC_REF_RATE _SB_MAKEMASK(8,S_BCM1480_MC_REF_RATE)
+#define V_BCM1480_MC_REF_RATE(x) _SB_MAKEVALUE(x,S_BCM1480_MC_REF_RATE)
+#define G_BCM1480_MC_REF_RATE(x) _SB_GETVALUE(x,S_BCM1480_MC_REF_RATE,M_BCM1480_MC_REF_RATE)
+
+#define K_BCM1480_MC_REF_RATE_100MHz 0x31
+#define K_BCM1480_MC_REF_RATE_200MHz 0x62
+#define K_BCM1480_MC_REF_RATE_400MHz 0xC4
+
+#define V_BCM1480_MC_REF_RATE_100MHz V_BCM1480_MC_REF_RATE(K_BCM1480_MC_REF_RATE_100MHz)
+#define V_BCM1480_MC_REF_RATE_200MHz V_BCM1480_MC_REF_RATE(K_BCM1480_MC_REF_RATE_200MHz)
+#define V_BCM1480_MC_REF_RATE_400MHz V_BCM1480_MC_REF_RATE(K_BCM1480_MC_REF_RATE_400MHz)
+#define V_BCM1480_MC_REF_RATE_DEFAULT V_BCM1480_MC_REF_RATE_400MHz
+
+#if SIBYTE_HDR_FEATURE(1480, PASS2)
+#define M_BCM1480_MC_AUTO_REF_DIS _SB_MAKEMASK1(16)
+#endif
+
+/*
+ * ODT Register (Table 99)
+ */
+
+#if SIBYTE_HDR_FEATURE(1480, PASS2)
+#define M_BCM1480_MC_RD_ODT0_CS0 _SB_MAKEMASK1(0)
+#define M_BCM1480_MC_RD_ODT0_CS2 _SB_MAKEMASK1(1)
+#define M_BCM1480_MC_RD_ODT0_CS4 _SB_MAKEMASK1(2)
+#define M_BCM1480_MC_RD_ODT0_CS6 _SB_MAKEMASK1(3)
+#define M_BCM1480_MC_WR_ODT0_CS0 _SB_MAKEMASK1(4)
+#define M_BCM1480_MC_WR_ODT0_CS2 _SB_MAKEMASK1(5)
+#define M_BCM1480_MC_WR_ODT0_CS4 _SB_MAKEMASK1(6)
+#define M_BCM1480_MC_WR_ODT0_CS6 _SB_MAKEMASK1(7)
+#define M_BCM1480_MC_RD_ODT2_CS0 _SB_MAKEMASK1(8)
+#define M_BCM1480_MC_RD_ODT2_CS2 _SB_MAKEMASK1(9)
+#define M_BCM1480_MC_RD_ODT2_CS4 _SB_MAKEMASK1(10)
+#define M_BCM1480_MC_RD_ODT2_CS6 _SB_MAKEMASK1(11)
+#define M_BCM1480_MC_WR_ODT2_CS0 _SB_MAKEMASK1(12)
+#define M_BCM1480_MC_WR_ODT2_CS2 _SB_MAKEMASK1(13)
+#define M_BCM1480_MC_WR_ODT2_CS4 _SB_MAKEMASK1(14)
+#define M_BCM1480_MC_WR_ODT2_CS6 _SB_MAKEMASK1(15)
+#define M_BCM1480_MC_RD_ODT4_CS0 _SB_MAKEMASK1(16)
+#define M_BCM1480_MC_RD_ODT4_CS2 _SB_MAKEMASK1(17)
+#define M_BCM1480_MC_RD_ODT4_CS4 _SB_MAKEMASK1(18)
+#define M_BCM1480_MC_RD_ODT4_CS6 _SB_MAKEMASK1(19)
+#define M_BCM1480_MC_WR_ODT4_CS0 _SB_MAKEMASK1(20)
+#define M_BCM1480_MC_WR_ODT4_CS2 _SB_MAKEMASK1(21)
+#define M_BCM1480_MC_WR_ODT4_CS4 _SB_MAKEMASK1(22)
+#define M_BCM1480_MC_WR_ODT4_CS6 _SB_MAKEMASK1(23)
+#define M_BCM1480_MC_RD_ODT6_CS0 _SB_MAKEMASK1(24)
+#define M_BCM1480_MC_RD_ODT6_CS2 _SB_MAKEMASK1(25)
+#define M_BCM1480_MC_RD_ODT6_CS4 _SB_MAKEMASK1(26)
+#define M_BCM1480_MC_RD_ODT6_CS6 _SB_MAKEMASK1(27)
+#define M_BCM1480_MC_WR_ODT6_CS0 _SB_MAKEMASK1(28)
+#define M_BCM1480_MC_WR_ODT6_CS2 _SB_MAKEMASK1(29)
+#define M_BCM1480_MC_WR_ODT6_CS4 _SB_MAKEMASK1(30)
+#define M_BCM1480_MC_WR_ODT6_CS6 _SB_MAKEMASK1(31)
+
+#define M_BCM1480_MC_CS_ODD_ODT_EN _SB_MAKEMASK1(32)
+#endif
+
+/*
+ * Memory DLL Configuration Register (Table 93)
+ */
+
+#define S_BCM1480_MC_ADDR_COARSE_ADJ 0
+#define M_BCM1480_MC_ADDR_COARSE_ADJ _SB_MAKEMASK(6,S_BCM1480_MC_ADDR_COARSE_ADJ)
+#define V_BCM1480_MC_ADDR_COARSE_ADJ(x) _SB_MAKEVALUE(x,S_BCM1480_MC_ADDR_COARSE_ADJ)
+#define G_BCM1480_MC_ADDR_COARSE_ADJ(x) _SB_GETVALUE(x,S_BCM1480_MC_ADDR_COARSE_ADJ,M_BCM1480_MC_ADDR_COARSE_ADJ)
+#define V_BCM1480_MC_ADDR_COARSE_ADJ_DEFAULT V_BCM1480_MC_ADDR_COARSE_ADJ(0x0)
+
+#if SIBYTE_HDR_FEATURE(1480, PASS2)
+#define S_BCM1480_MC_ADDR_FREQ_RANGE 8
+#define M_BCM1480_MC_ADDR_FREQ_RANGE _SB_MAKEMASK(4,S_BCM1480_MC_ADDR_FREQ_RANGE)
+#define V_BCM1480_MC_ADDR_FREQ_RANGE(x) _SB_MAKEVALUE(x,S_BCM1480_MC_ADDR_FREQ_RANGE)
+#define G_BCM1480_MC_ADDR_FREQ_RANGE(x) _SB_GETVALUE(x,S_BCM1480_MC_ADDR_FREQ_RANGE,M_BCM1480_MC_ADDR_FREQ_RANGE)
+#define V_BCM1480_MC_ADDR_FREQ_RANGE_DEFAULT V_BCM1480_MC_ADDR_FREQ_RANGE(0x4)
+#endif
+
+#define S_BCM1480_MC_ADDR_FINE_ADJ 8
+#define M_BCM1480_MC_ADDR_FINE_ADJ _SB_MAKEMASK(4,S_BCM1480_MC_ADDR_FINE_ADJ)
+#define V_BCM1480_MC_ADDR_FINE_ADJ(x) _SB_MAKEVALUE(x,S_BCM1480_MC_ADDR_FINE_ADJ)
+#define G_BCM1480_MC_ADDR_FINE_ADJ(x) _SB_GETVALUE(x,S_BCM1480_MC_ADDR_FINE_ADJ,M_BCM1480_MC_ADDR_FINE_ADJ)
+#define V_BCM1480_MC_ADDR_FINE_ADJ_DEFAULT V_BCM1480_MC_ADDR_FINE_ADJ(0x8)
+
+#define S_BCM1480_MC_DQI_COARSE_ADJ 16
+#define M_BCM1480_MC_DQI_COARSE_ADJ _SB_MAKEMASK(6,S_BCM1480_MC_DQI_COARSE_ADJ)
+#define V_BCM1480_MC_DQI_COARSE_ADJ(x) _SB_MAKEVALUE(x,S_BCM1480_MC_DQI_COARSE_ADJ)
+#define G_BCM1480_MC_DQI_COARSE_ADJ(x) _SB_GETVALUE(x,S_BCM1480_MC_DQI_COARSE_ADJ,M_BCM1480_MC_DQI_COARSE_ADJ)
+#define V_BCM1480_MC_DQI_COARSE_ADJ_DEFAULT V_BCM1480_MC_DQI_COARSE_ADJ(0x0)
+
+#if SIBYTE_HDR_FEATURE(1480, PASS2)
+#define S_BCM1480_MC_DQI_FREQ_RANGE 24
+#define M_BCM1480_MC_DQI_FREQ_RANGE _SB_MAKEMASK(4,S_BCM1480_MC_DQI_FREQ_RANGE)
+#define V_BCM1480_MC_DQI_FREQ_RANGE(x) _SB_MAKEVALUE(x,S_BCM1480_MC_DQI_FREQ_RANGE)
+#define G_BCM1480_MC_DQI_FREQ_RANGE(x) _SB_GETVALUE(x,S_BCM1480_MC_DQI_FREQ_RANGE,M_BCM1480_MC_DQI_FREQ_RANGE)
+#define V_BCM1480_MC_DQI_FREQ_RANGE_DEFAULT V_BCM1480_MC_DQI_FREQ_RANGE(0x4)
+#endif
+
+#define S_BCM1480_MC_DQI_FINE_ADJ 24
+#define M_BCM1480_MC_DQI_FINE_ADJ _SB_MAKEMASK(4,S_BCM1480_MC_DQI_FINE_ADJ)
+#define V_BCM1480_MC_DQI_FINE_ADJ(x) _SB_MAKEVALUE(x,S_BCM1480_MC_DQI_FINE_ADJ)
+#define G_BCM1480_MC_DQI_FINE_ADJ(x) _SB_GETVALUE(x,S_BCM1480_MC_DQI_FINE_ADJ,M_BCM1480_MC_DQI_FINE_ADJ)
+#define V_BCM1480_MC_DQI_FINE_ADJ_DEFAULT V_BCM1480_MC_DQI_FINE_ADJ(0x8)
+
+#define S_BCM1480_MC_DQO_COARSE_ADJ 32
+#define M_BCM1480_MC_DQO_COARSE_ADJ _SB_MAKEMASK(6,S_BCM1480_MC_DQO_COARSE_ADJ)
+#define V_BCM1480_MC_DQO_COARSE_ADJ(x) _SB_MAKEVALUE(x,S_BCM1480_MC_DQO_COARSE_ADJ)
+#define G_BCM1480_MC_DQO_COARSE_ADJ(x) _SB_GETVALUE(x,S_BCM1480_MC_DQO_COARSE_ADJ,M_BCM1480_MC_DQO_COARSE_ADJ)
+#define V_BCM1480_MC_DQO_COARSE_ADJ_DEFAULT V_BCM1480_MC_DQO_COARSE_ADJ(0x0)
+
+#if SIBYTE_HDR_FEATURE(1480, PASS2)
+#define S_BCM1480_MC_DQO_FREQ_RANGE 40
+#define M_BCM1480_MC_DQO_FREQ_RANGE _SB_MAKEMASK(4,S_BCM1480_MC_DQO_FREQ_RANGE)
+#define V_BCM1480_MC_DQO_FREQ_RANGE(x) _SB_MAKEVALUE(x,S_BCM1480_MC_DQO_FREQ_RANGE)
+#define G_BCM1480_MC_DQO_FREQ_RANGE(x) _SB_GETVALUE(x,S_BCM1480_MC_DQO_FREQ_RANGE,M_BCM1480_MC_DQO_FREQ_RANGE)
+#define V_BCM1480_MC_DQO_FREQ_RANGE_DEFAULT V_BCM1480_MC_DQO_FREQ_RANGE(0x4)
+#endif
+
+#define S_BCM1480_MC_DQO_FINE_ADJ 40
+#define M_BCM1480_MC_DQO_FINE_ADJ _SB_MAKEMASK(4,S_BCM1480_MC_DQO_FINE_ADJ)
+#define V_BCM1480_MC_DQO_FINE_ADJ(x) _SB_MAKEVALUE(x,S_BCM1480_MC_DQO_FINE_ADJ)
+#define G_BCM1480_MC_DQO_FINE_ADJ(x) _SB_GETVALUE(x,S_BCM1480_MC_DQO_FINE_ADJ,M_BCM1480_MC_DQO_FINE_ADJ)
+#define V_BCM1480_MC_DQO_FINE_ADJ_DEFAULT V_BCM1480_MC_DQO_FINE_ADJ(0x8)
+
+#if SIBYTE_HDR_FEATURE(1480, PASS2)
+#define S_BCM1480_MC_DLL_PDSEL 44
+#define M_BCM1480_MC_DLL_PDSEL _SB_MAKEMASK(2,S_BCM1480_MC_DLL_PDSEL)
+#define V_BCM1480_MC_DLL_PDSEL(x) _SB_MAKEVALUE(x,S_BCM1480_MC_DLL_PDSEL)
+#define G_BCM1480_MC_DLL_PDSEL(x) _SB_GETVALUE(x,S_BCM1480_MC_DLL_PDSEL,M_BCM1480_MC_DLL_PDSEL)
+#define V_BCM1480_MC_DLL_DEFAULT_PDSEL V_BCM1480_MC_DLL_PDSEL(0x0)
+
+#define M_BCM1480_MC_DLL_REGBYPASS _SB_MAKEMASK1(46)
+#define M_BCM1480_MC_DQO_SHIFT _SB_MAKEMASK1(47)
+#endif
+
+#define S_BCM1480_MC_DLL_DEFAULT 48
+#define M_BCM1480_MC_DLL_DEFAULT _SB_MAKEMASK(6,S_BCM1480_MC_DLL_DEFAULT)
+#define V_BCM1480_MC_DLL_DEFAULT(x) _SB_MAKEVALUE(x,S_BCM1480_MC_DLL_DEFAULT)
+#define G_BCM1480_MC_DLL_DEFAULT(x) _SB_GETVALUE(x,S_BCM1480_MC_DLL_DEFAULT,M_BCM1480_MC_DLL_DEFAULT)
+#define V_BCM1480_MC_DLL_DEFAULT_DEFAULT V_BCM1480_MC_DLL_DEFAULT(0x10)
+
+#if SIBYTE_HDR_FEATURE(1480, PASS2)
+#define S_BCM1480_MC_DLL_REGCTRL 54
+#define M_BCM1480_MC_DLL_REGCTRL _SB_MAKEMASK(2,S_BCM1480_MC_DLL_REGCTRL)
+#define V_BCM1480_MC_DLL_REGCTRL(x) _SB_MAKEVALUE(x,S_BCM1480_MC_DLL_REGCTRL)
+#define G_BCM1480_MC_DLL_REGCTRL(x) _SB_GETVALUE(x,S_BCM1480_MC_DLL_REGCTRL,M_BCM1480_MC_DLL_REGCTRL)
+#define V_BCM1480_MC_DLL_DEFAULT_REGCTRL V_BCM1480_MC_DLL_REGCTRL(0x0)
+#endif
+
+#if SIBYTE_HDR_FEATURE(1480, PASS2)
+#define S_BCM1480_MC_DLL_FREQ_RANGE 56
+#define M_BCM1480_MC_DLL_FREQ_RANGE _SB_MAKEMASK(4,S_BCM1480_MC_DLL_FREQ_RANGE)
+#define V_BCM1480_MC_DLL_FREQ_RANGE(x) _SB_MAKEVALUE(x,S_BCM1480_MC_DLL_FREQ_RANGE)
+#define G_BCM1480_MC_DLL_FREQ_RANGE(x) _SB_GETVALUE(x,S_BCM1480_MC_DLL_FREQ_RANGE,M_BCM1480_MC_DLL_FREQ_RANGE)
+#define V_BCM1480_MC_DLL_FREQ_RANGE_DEFAULT V_BCM1480_MC_DLL_FREQ_RANGE(0x4)
+#endif
+
+#define S_BCM1480_MC_DLL_STEP_SIZE 56
+#define M_BCM1480_MC_DLL_STEP_SIZE _SB_MAKEMASK(4,S_BCM1480_MC_DLL_STEP_SIZE)
+#define V_BCM1480_MC_DLL_STEP_SIZE(x) _SB_MAKEVALUE(x,S_BCM1480_MC_DLL_STEP_SIZE)
+#define G_BCM1480_MC_DLL_STEP_SIZE(x) _SB_GETVALUE(x,S_BCM1480_MC_DLL_STEP_SIZE,M_BCM1480_MC_DLL_STEP_SIZE)
+#define V_BCM1480_MC_DLL_STEP_SIZE_DEFAULT V_BCM1480_MC_DLL_STEP_SIZE(0x8)
+
+#if SIBYTE_HDR_FEATURE(1480, PASS2)
+#define S_BCM1480_MC_DLL_BGCTRL 60
+#define M_BCM1480_MC_DLL_BGCTRL _SB_MAKEMASK(2,S_BCM1480_MC_DLL_BGCTRL)
+#define V_BCM1480_MC_DLL_BGCTRL(x) _SB_MAKEVALUE(x,S_BCM1480_MC_DLL_BGCTRL)
+#define G_BCM1480_MC_DLL_BGCTRL(x) _SB_GETVALUE(x,S_BCM1480_MC_DLL_BGCTRL,M_BCM1480_MC_DLL_BGCTRL)
+#define V_BCM1480_MC_DLL_DEFAULT_BGCTRL V_BCM1480_MC_DLL_BGCTRL(0x0)
+#endif
+
+#define M_BCM1480_MC_DLL_BYPASS _SB_MAKEMASK1(63)
+
+/*
+ * Memory Drive Configuration Register (Table 94)
+ */
+
+#define S_BCM1480_MC_RTT_BYP_PULLDOWN 0
+#define M_BCM1480_MC_RTT_BYP_PULLDOWN _SB_MAKEMASK(3,S_BCM1480_MC_RTT_BYP_PULLDOWN)
+#define V_BCM1480_MC_RTT_BYP_PULLDOWN(x) _SB_MAKEVALUE(x,S_BCM1480_MC_RTT_BYP_PULLDOWN)
+#define G_BCM1480_MC_RTT_BYP_PULLDOWN(x) _SB_GETVALUE(x,S_BCM1480_MC_RTT_BYP_PULLDOWN,M_BCM1480_MC_RTT_BYP_PULLDOWN)
+
+#define S_BCM1480_MC_RTT_BYP_PULLUP 6
+#define M_BCM1480_MC_RTT_BYP_PULLUP _SB_MAKEMASK(3,S_BCM1480_MC_RTT_BYP_PULLUP)
+#define V_BCM1480_MC_RTT_BYP_PULLUP(x) _SB_MAKEVALUE(x,S_BCM1480_MC_RTT_BYP_PULLUP)
+#define G_BCM1480_MC_RTT_BYP_PULLUP(x) _SB_GETVALUE(x,S_BCM1480_MC_RTT_BYP_PULLUP,M_BCM1480_MC_RTT_BYP_PULLUP)
+
+#define M_BCM1480_MC_RTT_BYPASS _SB_MAKEMASK1(8)
+#define M_BCM1480_MC_RTT_COMP_MOV_AVG _SB_MAKEMASK1(9)
+
+#define S_BCM1480_MC_PVT_BYP_C1_PULLDOWN 10
+#define M_BCM1480_MC_PVT_BYP_C1_PULLDOWN _SB_MAKEMASK(4,S_BCM1480_MC_PVT_BYP_C1_PULLDOWN)
+#define V_BCM1480_MC_PVT_BYP_C1_PULLDOWN(x) _SB_MAKEVALUE(x,S_BCM1480_MC_PVT_BYP_C1_PULLDOWN)
+#define G_BCM1480_MC_PVT_BYP_C1_PULLDOWN(x) _SB_GETVALUE(x,S_BCM1480_MC_PVT_BYP_C1_PULLDOWN,M_BCM1480_MC_PVT_BYP_C1_PULLDOWN)
+
+#define S_BCM1480_MC_PVT_BYP_C1_PULLUP 15
+#define M_BCM1480_MC_PVT_BYP_C1_PULLUP _SB_MAKEMASK(4,S_BCM1480_MC_PVT_BYP_C1_PULLUP)
+#define V_BCM1480_MC_PVT_BYP_C1_PULLUP(x) _SB_MAKEVALUE(x,S_BCM1480_MC_PVT_BYP_C1_PULLUP)
+#define G_BCM1480_MC_PVT_BYP_C1_PULLUP(x) _SB_GETVALUE(x,S_BCM1480_MC_PVT_BYP_C1_PULLUP,M_BCM1480_MC_PVT_BYP_C1_PULLUP)
+
+#define S_BCM1480_MC_PVT_BYP_C2_PULLDOWN 20
+#define M_BCM1480_MC_PVT_BYP_C2_PULLDOWN _SB_MAKEMASK(4,S_BCM1480_MC_PVT_BYP_C2_PULLDOWN)
+#define V_BCM1480_MC_PVT_BYP_C2_PULLDOWN(x) _SB_MAKEVALUE(x,S_BCM1480_MC_PVT_BYP_C2_PULLDOWN)
+#define G_BCM1480_MC_PVT_BYP_C2_PULLDOWN(x) _SB_GETVALUE(x,S_BCM1480_MC_PVT_BYP_C2_PULLDOWN,M_BCM1480_MC_PVT_BYP_C2_PULLDOWN)
+
+#define S_BCM1480_MC_PVT_BYP_C2_PULLUP 25
+#define M_BCM1480_MC_PVT_BYP_C2_PULLUP _SB_MAKEMASK(4,S_BCM1480_MC_PVT_BYP_C2_PULLUP)
+#define V_BCM1480_MC_PVT_BYP_C2_PULLUP(x) _SB_MAKEVALUE(x,S_BCM1480_MC_PVT_BYP_C2_PULLUP)
+#define G_BCM1480_MC_PVT_BYP_C2_PULLUP(x) _SB_GETVALUE(x,S_BCM1480_MC_PVT_BYP_C2_PULLUP,M_BCM1480_MC_PVT_BYP_C2_PULLUP)
+
+#define M_BCM1480_MC_PVT_BYPASS _SB_MAKEMASK1(30)
+#define M_BCM1480_MC_PVT_COMP_MOV_AVG _SB_MAKEMASK1(31)
+
+#define M_BCM1480_MC_CLK_CLASS _SB_MAKEMASK1(34)
+#define M_BCM1480_MC_DATA_CLASS _SB_MAKEMASK1(35)
+#define M_BCM1480_MC_ADDR_CLASS _SB_MAKEMASK1(36)
+
+#define M_BCM1480_MC_DQ_ODT_75 _SB_MAKEMASK1(37)
+#define M_BCM1480_MC_DQ_ODT_150 _SB_MAKEMASK1(38)
+#define M_BCM1480_MC_DQS_ODT_75 _SB_MAKEMASK1(39)
+#define M_BCM1480_MC_DQS_ODT_150 _SB_MAKEMASK1(40)
+#define M_BCM1480_MC_DQS_DIFF _SB_MAKEMASK1(41)
+
+/*
+ * ECC Test Data Register (Table 95)
+ */
+
+#define S_BCM1480_MC_DATA_INVERT 0
+#define M_DATA_ECC_INVERT _SB_MAKEMASK(64,S_BCM1480_MC_ECC_INVERT)
+
+/*
+ * ECC Test ECC Register (Table 96)
+ */
+
+#define S_BCM1480_MC_ECC_INVERT 0
+#define M_BCM1480_MC_ECC_INVERT _SB_MAKEMASK(8,S_BCM1480_MC_ECC_INVERT)
+
+/*
+ * SDRAM Timing Register (Table 97)
+ */
+
+#define S_BCM1480_MC_tRCD 0
+#define M_BCM1480_MC_tRCD _SB_MAKEMASK(4,S_BCM1480_MC_tRCD)
+#define V_BCM1480_MC_tRCD(x) _SB_MAKEVALUE(x,S_BCM1480_MC_tRCD)
+#define G_BCM1480_MC_tRCD(x) _SB_GETVALUE(x,S_BCM1480_MC_tRCD,M_BCM1480_MC_tRCD)
+#define K_BCM1480_MC_tRCD_DEFAULT 3
+#define V_BCM1480_MC_tRCD_DEFAULT V_BCM1480_MC_tRCD(K_BCM1480_MC_tRCD_DEFAULT)
+
+#define S_BCM1480_MC_tCL 4
+#define M_BCM1480_MC_tCL _SB_MAKEMASK(4,S_BCM1480_MC_tCL)
+#define V_BCM1480_MC_tCL(x) _SB_MAKEVALUE(x,S_BCM1480_MC_tCL)
+#define G_BCM1480_MC_tCL(x) _SB_GETVALUE(x,S_BCM1480_MC_tCL,M_BCM1480_MC_tCL)
+#define K_BCM1480_MC_tCL_DEFAULT 2
+#define V_BCM1480_MC_tCL_DEFAULT V_BCM1480_MC_tCL(K_BCM1480_MC_tCL_DEFAULT)
+
+#define M_BCM1480_MC_tCrDh _SB_MAKEMASK1(8)
+
+#define S_BCM1480_MC_tWR 9
+#define M_BCM1480_MC_tWR _SB_MAKEMASK(3,S_BCM1480_MC_tWR)
+#define V_BCM1480_MC_tWR(x) _SB_MAKEVALUE(x,S_BCM1480_MC_tWR)
+#define G_BCM1480_MC_tWR(x) _SB_GETVALUE(x,S_BCM1480_MC_tWR,M_BCM1480_MC_tWR)
+#define K_BCM1480_MC_tWR_DEFAULT 2
+#define V_BCM1480_MC_tWR_DEFAULT V_BCM1480_MC_tWR(K_BCM1480_MC_tWR_DEFAULT)
+
+#define S_BCM1480_MC_tCwD 12
+#define M_BCM1480_MC_tCwD _SB_MAKEMASK(4,S_BCM1480_MC_tCwD)
+#define V_BCM1480_MC_tCwD(x) _SB_MAKEVALUE(x,S_BCM1480_MC_tCwD)
+#define G_BCM1480_MC_tCwD(x) _SB_GETVALUE(x,S_BCM1480_MC_tCwD,M_BCM1480_MC_tCwD)
+#define K_BCM1480_MC_tCwD_DEFAULT 1
+#define V_BCM1480_MC_tCwD_DEFAULT V_BCM1480_MC_tCwD(K_BCM1480_MC_tCwD_DEFAULT)
+
+#define S_BCM1480_MC_tRP 16
+#define M_BCM1480_MC_tRP _SB_MAKEMASK(4,S_BCM1480_MC_tRP)
+#define V_BCM1480_MC_tRP(x) _SB_MAKEVALUE(x,S_BCM1480_MC_tRP)
+#define G_BCM1480_MC_tRP(x) _SB_GETVALUE(x,S_BCM1480_MC_tRP,M_BCM1480_MC_tRP)
+#define K_BCM1480_MC_tRP_DEFAULT 4
+#define V_BCM1480_MC_tRP_DEFAULT V_BCM1480_MC_tRP(K_BCM1480_MC_tRP_DEFAULT)
+
+#define S_BCM1480_MC_tRRD 20
+#define M_BCM1480_MC_tRRD _SB_MAKEMASK(4,S_BCM1480_MC_tRRD)
+#define V_BCM1480_MC_tRRD(x) _SB_MAKEVALUE(x,S_BCM1480_MC_tRRD)
+#define G_BCM1480_MC_tRRD(x) _SB_GETVALUE(x,S_BCM1480_MC_tRRD,M_BCM1480_MC_tRRD)
+#define K_BCM1480_MC_tRRD_DEFAULT 2
+#define V_BCM1480_MC_tRRD_DEFAULT V_BCM1480_MC_tRRD(K_BCM1480_MC_tRRD_DEFAULT)
+
+#define S_BCM1480_MC_tRCw 24
+#define M_BCM1480_MC_tRCw _SB_MAKEMASK(5,S_BCM1480_MC_tRCw)
+#define V_BCM1480_MC_tRCw(x) _SB_MAKEVALUE(x,S_BCM1480_MC_tRCw)
+#define G_BCM1480_MC_tRCw(x) _SB_GETVALUE(x,S_BCM1480_MC_tRCw,M_BCM1480_MC_tRCw)
+#define K_BCM1480_MC_tRCw_DEFAULT 10
+#define V_BCM1480_MC_tRCw_DEFAULT V_BCM1480_MC_tRCw(K_BCM1480_MC_tRCw_DEFAULT)
+
+#define S_BCM1480_MC_tRCr 32
+#define M_BCM1480_MC_tRCr _SB_MAKEMASK(5,S_BCM1480_MC_tRCr)
+#define V_BCM1480_MC_tRCr(x) _SB_MAKEVALUE(x,S_BCM1480_MC_tRCr)
+#define G_BCM1480_MC_tRCr(x) _SB_GETVALUE(x,S_BCM1480_MC_tRCr,M_BCM1480_MC_tRCr)
+#define K_BCM1480_MC_tRCr_DEFAULT 9
+#define V_BCM1480_MC_tRCr_DEFAULT V_BCM1480_MC_tRCr(K_BCM1480_MC_tRCr_DEFAULT)
+
+#if SIBYTE_HDR_FEATURE(1480, PASS2)
+#define S_BCM1480_MC_tFAW 40
+#define M_BCM1480_MC_tFAW _SB_MAKEMASK(6,S_BCM1480_MC_tFAW)
+#define V_BCM1480_MC_tFAW(x) _SB_MAKEVALUE(x,S_BCM1480_MC_tFAW)
+#define G_BCM1480_MC_tFAW(x) _SB_GETVALUE(x,S_BCM1480_MC_tFAW,M_BCM1480_MC_tFAW)
+#define K_BCM1480_MC_tFAW_DEFAULT 0
+#define V_BCM1480_MC_tFAW_DEFAULT V_BCM1480_MC_tFAW(K_BCM1480_MC_tFAW_DEFAULT)
+#endif
+
+#define S_BCM1480_MC_tRFC 48
+#define M_BCM1480_MC_tRFC _SB_MAKEMASK(7,S_BCM1480_MC_tRFC)
+#define V_BCM1480_MC_tRFC(x) _SB_MAKEVALUE(x,S_BCM1480_MC_tRFC)
+#define G_BCM1480_MC_tRFC(x) _SB_GETVALUE(x,S_BCM1480_MC_tRFC,M_BCM1480_MC_tRFC)
+#define K_BCM1480_MC_tRFC_DEFAULT 12
+#define V_BCM1480_MC_tRFC_DEFAULT V_BCM1480_MC_tRFC(K_BCM1480_MC_tRFC_DEFAULT)
+
+#define S_BCM1480_MC_tFIFO 56
+#define M_BCM1480_MC_tFIFO _SB_MAKEMASK(2,S_BCM1480_MC_tFIFO)
+#define V_BCM1480_MC_tFIFO(x) _SB_MAKEVALUE(x,S_BCM1480_MC_tFIFO)
+#define G_BCM1480_MC_tFIFO(x) _SB_GETVALUE(x,S_BCM1480_MC_tFIFO,M_BCM1480_MC_tFIFO)
+#define K_BCM1480_MC_tFIFO_DEFAULT 0
+#define V_BCM1480_MC_tFIFO_DEFAULT V_BCM1480_MC_tFIFO(K_BCM1480_MC_tFIFO_DEFAULT)
+
+#define S_BCM1480_MC_tW2R 58
+#define M_BCM1480_MC_tW2R _SB_MAKEMASK(2,S_BCM1480_MC_tW2R)
+#define V_BCM1480_MC_tW2R(x) _SB_MAKEVALUE(x,S_BCM1480_MC_tW2R)
+#define G_BCM1480_MC_tW2R(x) _SB_GETVALUE(x,S_BCM1480_MC_tW2R,M_BCM1480_MC_tW2R)
+#define K_BCM1480_MC_tW2R_DEFAULT 1
+#define V_BCM1480_MC_tW2R_DEFAULT V_BCM1480_MC_tW2R(K_BCM1480_MC_tW2R_DEFAULT)
+
+#define S_BCM1480_MC_tR2W 60
+#define M_BCM1480_MC_tR2W _SB_MAKEMASK(2,S_BCM1480_MC_tR2W)
+#define V_BCM1480_MC_tR2W(x) _SB_MAKEVALUE(x,S_BCM1480_MC_tR2W)
+#define G_BCM1480_MC_tR2W(x) _SB_GETVALUE(x,S_BCM1480_MC_tR2W,M_BCM1480_MC_tR2W)
+#define K_BCM1480_MC_tR2W_DEFAULT 0
+#define V_BCM1480_MC_tR2W_DEFAULT V_BCM1480_MC_tR2W(K_BCM1480_MC_tR2W_DEFAULT)
+
+#define M_BCM1480_MC_tR2R _SB_MAKEMASK1(62)
+
+#define V_BCM1480_MC_TIMING_DEFAULT (M_BCM1480_MC_tR2R | \
+ V_BCM1480_MC_tFIFO_DEFAULT | \
+ V_BCM1480_MC_tR2W_DEFAULT | \
+ V_BCM1480_MC_tW2R_DEFAULT | \
+ V_BCM1480_MC_tRFC_DEFAULT | \
+ V_BCM1480_MC_tRCr_DEFAULT | \
+ V_BCM1480_MC_tRCw_DEFAULT | \
+ V_BCM1480_MC_tRRD_DEFAULT | \
+ V_BCM1480_MC_tRP_DEFAULT | \
+ V_BCM1480_MC_tCwD_DEFAULT | \
+ V_BCM1480_MC_tWR_DEFAULT | \
+ M_BCM1480_MC_tCrDh | \
+ V_BCM1480_MC_tCL_DEFAULT | \
+ V_BCM1480_MC_tRCD_DEFAULT)
+
+/*
+ * SDRAM Timing Register 2
+ */
+
+#if SIBYTE_HDR_FEATURE(1480, PASS2)
+
+#define S_BCM1480_MC_tAL 0
+#define M_BCM1480_MC_tAL _SB_MAKEMASK(4,S_BCM1480_MC_tAL)
+#define V_BCM1480_MC_tAL(x) _SB_MAKEVALUE(x,S_BCM1480_MC_tAL)
+#define G_BCM1480_MC_tAL(x) _SB_GETVALUE(x,S_BCM1480_MC_tAL,M_BCM1480_MC_tAL)
+#define K_BCM1480_MC_tAL_DEFAULT 0
+#define V_BCM1480_MC_tAL_DEFAULT V_BCM1480_MC_tAL(K_BCM1480_MC_tAL_DEFAULT)
+
+#define S_BCM1480_MC_tRTP 4
+#define M_BCM1480_MC_tRTP _SB_MAKEMASK(3,S_BCM1480_MC_tRTP)
+#define V_BCM1480_MC_tRTP(x) _SB_MAKEVALUE(x,S_BCM1480_MC_tRTP)
+#define G_BCM1480_MC_tRTP(x) _SB_GETVALUE(x,S_BCM1480_MC_tRTP,M_BCM1480_MC_tRTP)
+#define K_BCM1480_MC_tRTP_DEFAULT 2
+#define V_BCM1480_MC_tRTP_DEFAULT V_BCM1480_MC_tRTP(K_BCM1480_MC_tRTP_DEFAULT)
+
+#define S_BCM1480_MC_tW2W 8
+#define M_BCM1480_MC_tW2W _SB_MAKEMASK(2,S_BCM1480_MC_tW2W)
+#define V_BCM1480_MC_tW2W(x) _SB_MAKEVALUE(x,S_BCM1480_MC_tW2W)
+#define G_BCM1480_MC_tW2W(x) _SB_GETVALUE(x,S_BCM1480_MC_tW2W,M_BCM1480_MC_tW2W)
+#define K_BCM1480_MC_tW2W_DEFAULT 0
+#define V_BCM1480_MC_tW2W_DEFAULT V_BCM1480_MC_tW2W(K_BCM1480_MC_tW2W_DEFAULT)
+
+#define S_BCM1480_MC_tRAP 12
+#define M_BCM1480_MC_tRAP _SB_MAKEMASK(4,S_BCM1480_MC_tRAP)
+#define V_BCM1480_MC_tRAP(x) _SB_MAKEVALUE(x,S_BCM1480_MC_tRAP)
+#define G_BCM1480_MC_tRAP(x) _SB_GETVALUE(x,S_BCM1480_MC_tRAP,M_BCM1480_MC_tRAP)
+#define K_BCM1480_MC_tRAP_DEFAULT 0
+#define V_BCM1480_MC_tRAP_DEFAULT V_BCM1480_MC_tRAP(K_BCM1480_MC_tRAP_DEFAULT)
+
+#endif
+
+
+
+/*
+ * Global Registers: single instances per BCM1480
+ */
+
+/*
+ * Global Configuration Register (Table 99)
+ */
+
+#define S_BCM1480_MC_BLK_SET_MARK 8
+#define M_BCM1480_MC_BLK_SET_MARK _SB_MAKEMASK(4,S_BCM1480_MC_BLK_SET_MARK)
+#define V_BCM1480_MC_BLK_SET_MARK(x) _SB_MAKEVALUE(x,S_BCM1480_MC_BLK_SET_MARK)
+#define G_BCM1480_MC_BLK_SET_MARK(x) _SB_GETVALUE(x,S_BCM1480_MC_BLK_SET_MARK,M_BCM1480_MC_BLK_SET_MARK)
+
+#define S_BCM1480_MC_BLK_CLR_MARK 12
+#define M_BCM1480_MC_BLK_CLR_MARK _SB_MAKEMASK(4,S_BCM1480_MC_BLK_CLR_MARK)
+#define V_BCM1480_MC_BLK_CLR_MARK(x) _SB_MAKEVALUE(x,S_BCM1480_MC_BLK_CLR_MARK)
+#define G_BCM1480_MC_BLK_CLR_MARK(x) _SB_GETVALUE(x,S_BCM1480_MC_BLK_CLR_MARK,M_BCM1480_MC_BLK_CLR_MARK)
+
+#define M_BCM1480_MC_PKT_PRIORITY _SB_MAKEMASK1(16)
+
+#define S_BCM1480_MC_MAX_AGE 20
+#define M_BCM1480_MC_MAX_AGE _SB_MAKEMASK(4,S_BCM1480_MC_MAX_AGE)
+#define V_BCM1480_MC_MAX_AGE(x) _SB_MAKEVALUE(x,S_BCM1480_MC_MAX_AGE)
+#define G_BCM1480_MC_MAX_AGE(x) _SB_GETVALUE(x,S_BCM1480_MC_MAX_AGE,M_BCM1480_MC_MAX_AGE)
+
+#define M_BCM1480_MC_BERR_DISABLE _SB_MAKEMASK1(29)
+#define M_BCM1480_MC_FORCE_SEQ _SB_MAKEMASK1(30)
+#define M_BCM1480_MC_VGEN _SB_MAKEMASK1(32)
+
+#define S_BCM1480_MC_SLEW 33
+#define M_BCM1480_MC_SLEW _SB_MAKEMASK(2,S_BCM1480_MC_SLEW)
+#define V_BCM1480_MC_SLEW(x) _SB_MAKEVALUE(x,S_BCM1480_MC_SLEW)
+#define G_BCM1480_MC_SLEW(x) _SB_GETVALUE(x,S_BCM1480_MC_SLEW,M_BCM1480_MC_SLEW)
+
+#define M_BCM1480_MC_SSTL_VOLTAGE _SB_MAKEMASK1(35)
+
+/*
+ * Global Channel Interleave Register (Table 100)
+ */
+
+#define S_BCM1480_MC_INTLV0 0
+#define M_BCM1480_MC_INTLV0 _SB_MAKEMASK(6,S_BCM1480_MC_INTLV0)
+#define V_BCM1480_MC_INTLV0(x) _SB_MAKEVALUE(x,S_BCM1480_MC_INTLV0)
+#define G_BCM1480_MC_INTLV0(x) _SB_GETVALUE(x,S_BCM1480_MC_INTLV0,M_BCM1480_MC_INTLV0)
+
+#define S_BCM1480_MC_INTLV1 8
+#define M_BCM1480_MC_INTLV1 _SB_MAKEMASK(6,S_BCM1480_MC_INTLV1)
+#define V_BCM1480_MC_INTLV1(x) _SB_MAKEVALUE(x,S_BCM1480_MC_INTLV1)
+#define G_BCM1480_MC_INTLV1(x) _SB_GETVALUE(x,S_BCM1480_MC_INTLV1,M_BCM1480_MC_INTLV1)
+
+#define S_BCM1480_MC_INTLV_MODE 16
+#define M_BCM1480_MC_INTLV_MODE _SB_MAKEMASK(3,S_BCM1480_MC_INTLV_MODE)
+#define V_BCM1480_MC_INTLV_MODE(x) _SB_MAKEVALUE(x,S_BCM1480_MC_INTLV_MODE)
+#define G_BCM1480_MC_INTLV_MODE(x) _SB_GETVALUE(x,S_BCM1480_MC_INTLV_MODE,M_BCM1480_MC_INTLV_MODE)
+
+#define K_BCM1480_MC_INTLV_MODE_NONE 0x0
+#define K_BCM1480_MC_INTLV_MODE_01 0x1
+#define K_BCM1480_MC_INTLV_MODE_23 0x2
+#define K_BCM1480_MC_INTLV_MODE_01_23 0x3
+#define K_BCM1480_MC_INTLV_MODE_0123 0x4
+
+#define V_BCM1480_MC_INTLV_MODE_NONE V_BCM1480_MC_INTLV_MODE(K_BCM1480_MC_INTLV_MODE_NONE)
+#define V_BCM1480_MC_INTLV_MODE_01 V_BCM1480_MC_INTLV_MODE(K_BCM1480_MC_INTLV_MODE_01)
+#define V_BCM1480_MC_INTLV_MODE_23 V_BCM1480_MC_INTLV_MODE(K_BCM1480_MC_INTLV_MODE_23)
+#define V_BCM1480_MC_INTLV_MODE_01_23 V_BCM1480_MC_INTLV_MODE(K_BCM1480_MC_INTLV_MODE_01_23)
+#define V_BCM1480_MC_INTLV_MODE_0123 V_BCM1480_MC_INTLV_MODE(K_BCM1480_MC_INTLV_MODE_0123)
+
+/*
+ * ECC Status Register
+ */
+
+#define S_BCM1480_MC_ECC_ERR_ADDR 0
+#define M_BCM1480_MC_ECC_ERR_ADDR _SB_MAKEMASK(37,S_BCM1480_MC_ECC_ERR_ADDR)
+#define V_BCM1480_MC_ECC_ERR_ADDR(x) _SB_MAKEVALUE(x,S_BCM1480_MC_ECC_ERR_ADDR)
+#define G_BCM1480_MC_ECC_ERR_ADDR(x) _SB_GETVALUE(x,S_BCM1480_MC_ECC_ERR_ADDR,M_BCM1480_MC_ECC_ERR_ADDR)
+
+#if SIBYTE_HDR_FEATURE(1480, PASS2)
+#define M_BCM1480_MC_ECC_ERR_RMW _SB_MAKEMASK1(60)
+#endif
+
+#define M_BCM1480_MC_ECC_MULT_ERR_DET _SB_MAKEMASK1(61)
+#define M_BCM1480_MC_ECC_UERR_DET _SB_MAKEMASK1(62)
+#define M_BCM1480_MC_ECC_CERR_DET _SB_MAKEMASK1(63)
+
+/*
+ * Global ECC Address Register (Table 102)
+ */
+
+#define S_BCM1480_MC_ECC_CORR_ADDR 0
+#define M_BCM1480_MC_ECC_CORR_ADDR _SB_MAKEMASK(37,S_BCM1480_MC_ECC_CORR_ADDR)
+#define V_BCM1480_MC_ECC_CORR_ADDR(x) _SB_MAKEVALUE(x,S_BCM1480_MC_ECC_CORR_ADDR)
+#define G_BCM1480_MC_ECC_CORR_ADDR(x) _SB_GETVALUE(x,S_BCM1480_MC_ECC_CORR_ADDR,M_BCM1480_MC_ECC_CORR_ADDR)
+
+/*
+ * Global ECC Correction Register (Table 103)
+ */
+
+#define S_BCM1480_MC_ECC_CORRECT 0
+#define M_BCM1480_MC_ECC_CORRECT _SB_MAKEMASK(64,S_BCM1480_MC_ECC_CORRECT)
+#define V_BCM1480_MC_ECC_CORRECT(x) _SB_MAKEVALUE(x,S_BCM1480_MC_ECC_CORRECT)
+#define G_BCM1480_MC_ECC_CORRECT(x) _SB_GETVALUE(x,S_BCM1480_MC_ECC_CORRECT,M_BCM1480_MC_ECC_CORRECT)
+
+/*
+ * Global ECC Performance Counters Control Register (Table 104)
+ */
+
+#define S_BCM1480_MC_CHANNEL_SELECT 0
+#define M_BCM1480_MC_CHANNEL_SELECT _SB_MAKEMASK(4,S_BCM1480_MC_CHANNEL_SELECT)
+#define V_BCM1480_MC_CHANNEL_SELECT(x) _SB_MAKEVALUE(x,S_BCM1480_MC_CHANNEL_SELECT)
+#define G_BCM1480_MC_CHANNEL_SELECT(x) _SB_GETVALUE(x,S_BCM1480_MC_CHANNEL_SELECT,M_BCM1480_MC_CHANNEL_SELECT)
+#define K_BCM1480_MC_CHANNEL_SELECT_0 0x1
+#define K_BCM1480_MC_CHANNEL_SELECT_1 0x2
+#define K_BCM1480_MC_CHANNEL_SELECT_2 0x4
+#define K_BCM1480_MC_CHANNEL_SELECT_3 0x8
+
+#endif /* _BCM1480_MC_H */
Index: lmo/include/asm-mips/sibyte/bcm1480_regs.h
===================================================================
--- /dev/null 1970-01-01 00:00:00.000000000 +0000
+++ lmo/include/asm-mips/sibyte/bcm1480_regs.h 2005-10-19 22:34:11.000000000 -0700
@@ -0,0 +1,869 @@
+/* *********************************************************************
+ * BCM1255/BCM1280/BCM1455/BCM1480 Board Support Package
+ *
+ * Register Definitions File: bcm1480_regs.h
+ *
+ * This module contains the addresses of the on-chip peripherals
+ * on the BCM1280 and BCM1480.
+ *
+ * BCM1480 specification level: 1X55_1X80-UM100-D4 (11/24/03)
+ *
+ *********************************************************************
+ *
+ * Copyright 2000,2001,2002,2003
+ * Broadcom Corporation. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ ********************************************************************* */
+
+#ifndef _BCM1480_REGS_H
+#define _BCM1480_REGS_H
+
+#include "sb1250_defs.h"
+
+/* *********************************************************************
+ * Pull in the BCM1250's registers since a great deal of the 1480's
+ * functions are the same as the BCM1250.
+ ********************************************************************* */
+
+#include "sb1250_regs.h"
+
+
+/* *********************************************************************
+ * Some general notes:
+ *
+ * Register addresses are grouped by function and follow the order
+ * of the User Manual.
+ *
+ * For the most part, when there is more than one peripheral
+ * of the same type on the SOC, the constants below will be
+ * offsets from the base of each peripheral. For example,
+ * the MAC registers are described as offsets from the first
+ * MAC register, and there will be a MAC_REGISTER() macro
+ * to calculate the base address of a given MAC.
+ *
+ * The information in this file is based on the BCM1X55/BCM1X80
+ * User Manual, Document 1X55_1X80-UM100-R, 22/12/03.
+ *
+ * This file is basically a "what's new" header file. Since the
+ * BCM1250 and the new BCM1480 (and derivatives) share many common
+ * features, this file contains only what's new or changed from
+ * the 1250. (above, you can see that we include the 1250 symbols
+ * to get the base functionality).
+ *
+ * In software, be sure to use the correct symbols, particularly
+ * for blocks that are different between the two chip families.
+ * All BCM1480-specific symbols have _BCM1480_ in their names,
+ * and all BCM1250-specific and "base" functions that are common in
+ * both chips have no special names (this is for compatibility with
+ * older include files). Therefore, if you're working with the
+ * SCD, which is very different on each chip, A_SCD_xxx implies
+ * the BCM1250 version and A_BCM1480_SCD_xxx implies the BCM1480
+ * version.
+ ********************************************************************* */
+
+
+/* *********************************************************************
+ * Memory Controller Registers (Section 6)
+ ********************************************************************* */
+
+#define A_BCM1480_MC_BASE_0 0x0010050000
+#define A_BCM1480_MC_BASE_1 0x0010051000
+#define A_BCM1480_MC_BASE_2 0x0010052000
+#define A_BCM1480_MC_BASE_3 0x0010053000
+#define BCM1480_MC_REGISTER_SPACING 0x1000
+
+#define A_BCM1480_MC_BASE(ctlid) (A_BCM1480_MC_BASE_0+(ctlid)*BCM1480_MC_REGISTER_SPACING)
+#define A_BCM1480_MC_REGISTER(ctlid,reg) (A_BCM1480_MC_BASE(ctlid)+(reg))
+
+#define R_BCM1480_MC_CONFIG 0x0000000100
+#define R_BCM1480_MC_CS_START 0x0000000120
+#define R_BCM1480_MC_CS_END 0x0000000140
+#define S_BCM1480_MC_CS_STARTEND 24
+
+#define R_BCM1480_MC_CS01_ROW0 0x0000000180
+#define R_BCM1480_MC_CS01_ROW1 0x00000001A0
+#define R_BCM1480_MC_CS23_ROW0 0x0000000200
+#define R_BCM1480_MC_CS23_ROW1 0x0000000220
+#define R_BCM1480_MC_CS01_COL0 0x0000000280
+#define R_BCM1480_MC_CS01_COL1 0x00000002A0
+#define R_BCM1480_MC_CS23_COL0 0x0000000300
+#define R_BCM1480_MC_CS23_COL1 0x0000000320
+
+#define R_BCM1480_MC_CSX_BASE 0x0000000180
+#define R_BCM1480_MC_CSX_ROW0 0x0000000000 /* relative to CSX_BASE */
+#define R_BCM1480_MC_CSX_ROW1 0x0000000020 /* relative to CSX_BASE */
+#define R_BCM1480_MC_CSX_COL0 0x0000000100 /* relative to CSX_BASE */
+#define R_BCM1480_MC_CSX_COL1 0x0000000120 /* relative to CSX_BASE */
+#define BCM1480_MC_CSX_SPACING 0x0000000080 /* CS23 relative to CS01 */
+
+#define R_BCM1480_MC_CS01_BA 0x0000000380
+#define R_BCM1480_MC_CS23_BA 0x00000003A0
+#define R_BCM1480_MC_DRAMCMD 0x0000000400
+#define R_BCM1480_MC_DRAMMODE 0x0000000420
+#define R_BCM1480_MC_CLOCK_CFG 0x0000000440
+#define R_BCM1480_MC_MCLK_CFG R_BCM1480_MC_CLOCK_CFG
+#define R_BCM1480_MC_TEST_DATA 0x0000000480
+#define R_BCM1480_MC_TEST_ECC 0x00000004A0
+#define R_BCM1480_MC_TIMING1 0x00000004C0
+#define R_BCM1480_MC_TIMING2 0x00000004E0
+#define R_BCM1480_MC_DLL_CFG 0x0000000500
+#define R_BCM1480_MC_DRIVE_CFG 0x0000000520
+
+#if SIBYTE_HDR_FEATURE(1480, PASS2)
+#define R_BCM1480_MC_ODT 0x0000000460
+#define R_BCM1480_MC_ECC_STATUS 0x0000000540
+#endif
+
+/* Global registers (single instance) */
+#define A_BCM1480_MC_GLB_CONFIG 0x0010054100
+#define A_BCM1480_MC_GLB_INTLV 0x0010054120
+#define A_BCM1480_MC_GLB_ECC_STATUS 0x0010054140
+#define A_BCM1480_MC_GLB_ECC_ADDR 0x0010054160
+#define A_BCM1480_MC_GLB_ECC_CORRECT 0x0010054180
+#define A_BCM1480_MC_GLB_PERF_CNT_CONTROL 0x00100541A0
+
+/* *********************************************************************
+ * L2 Cache Control Registers (Section 5)
+ ********************************************************************* */
+
+#define A_BCM1480_L2_BASE 0x0010040000
+
+#define A_BCM1480_L2_READ_TAG 0x0010040018
+#define A_BCM1480_L2_ECC_TAG 0x0010040038
+#define A_BCM1480_L2_MISC0_VALUE 0x0010040058
+#define A_BCM1480_L2_MISC1_VALUE 0x0010040078
+#define A_BCM1480_L2_MISC2_VALUE 0x0010040098
+#define A_BCM1480_L2_MISC_CONFIG 0x0010040040 /* x040 */
+#define A_BCM1480_L2_CACHE_DISABLE 0x0010040060 /* x060 */
+#define A_BCM1480_L2_MAKECACHEDISABLE(x) (A_BCM1480_L2_CACHE_DISABLE | (((x)&0xF) << 12))
+#define A_BCM1480_L2_WAY_ENABLE_3_0 0x0010040080 /* x080 */
+#define A_BCM1480_L2_WAY_ENABLE_7_4 0x00100400A0 /* x0A0 */
+#define A_BCM1480_L2_MAKE_WAY_ENABLE_LO(x) (A_BCM1480_L2_WAY_ENABLE_3_0 | (((x)&0xF) << 12))
+#define A_BCM1480_L2_MAKE_WAY_ENABLE_HI(x) (A_BCM1480_L2_WAY_ENABLE_7_4 | (((x)&0xF) << 12))
+#define A_BCM1480_L2_MAKE_WAY_DISABLE_LO(x) (A_BCM1480_L2_WAY_ENABLE_3_0 | (((~x)&0xF) << 12))
+#define A_BCM1480_L2_MAKE_WAY_DISABLE_HI(x) (A_BCM1480_L2_WAY_ENABLE_7_4 | (((~x)&0xF) << 12))
+#define A_BCM1480_L2_WAY_LOCAL_3_0 0x0010040100 /* x100 */
+#define A_BCM1480_L2_WAY_LOCAL_7_4 0x0010040120 /* x120 */
+#define A_BCM1480_L2_WAY_REMOTE_3_0 0x0010040140 /* x140 */
+#define A_BCM1480_L2_WAY_REMOTE_7_4 0x0010040160 /* x160 */
+#define A_BCM1480_L2_WAY_AGENT_3_0 0x00100400C0 /* xxC0 */
+#define A_BCM1480_L2_WAY_AGENT_7_4 0x00100400E0 /* xxE0 */
+#define A_BCM1480_L2_WAY_ENABLE(A, banks) (A | (((~(banks))&0x0F) << 8))
+#define A_BCM1480_L2_BANK_BASE 0x00D0300000
+#define A_BCM1480_L2_BANK_ADDRESS(b) (A_BCM1480_L2_BANK_BASE | (((b)&0x7)<<17))
+#define A_BCM1480_L2_MGMT_TAG_BASE 0x00D0000000
+
+
+/* *********************************************************************
+ * PCI-X Interface Registers (Section 7)
+ ********************************************************************* */
+
+#define A_BCM1480_PCI_BASE 0x0010061400
+
+#define A_BCM1480_PCI_RESET 0x0010061400
+#define A_BCM1480_PCI_DLL 0x0010061500
+
+#define A_BCM1480_PCI_TYPE00_HEADER 0x002E000000
+
+/* *********************************************************************
+ * Ethernet MAC Registers (Section 11) and DMA Registers (Section 10.6)
+ ********************************************************************* */
+
+/* No register changes with Rev.C BCM1250, but one additional MAC */
+
+#define A_BCM1480_MAC_BASE_2 0x0010066000
+
+#ifndef A_MAC_BASE_2
+#define A_MAC_BASE_2 A_BCM1480_MAC_BASE_2
+#endif
+
+#define A_BCM1480_MAC_BASE_3 0x0010067000
+#define A_MAC_BASE_3 A_BCM1480_MAC_BASE_3
+
+#define R_BCM1480_MAC_DMA_OODPKTLOST 0x00000038
+
+#ifndef R_MAC_DMA_OODPKTLOST
+#define R_MAC_DMA_OODPKTLOST R_BCM1480_MAC_DMA_OODPKTLOST
+#endif
+
+
+/* *********************************************************************
+ * DUART Registers (Section 14)
+ ********************************************************************* */
+
+/* No significant differences from BCM1250, two DUARTs */
+
+/* Conventions, per user manual:
+ * DUART generic, channels A,B,C,D
+ * DUART0 implementing channels A,B
+ * DUART1 inplementing channels C,D
+ */
+
+#define BCM1480_DUART_NUM_PORTS 4
+
+#define A_BCM1480_DUART0 0x0010060000
+#define A_BCM1480_DUART1 0x0010060400
+#define A_BCM1480_DUART(chan) ((((chan)&2) == 0)? A_BCM1480_DUART0 : A_BCM1480_DUART1)
+
+#define BCM1480_DUART_CHANREG_SPACING 0x100
+#define A_BCM1480_DUART_CHANREG(chan,reg) (A_BCM1480_DUART(chan) \
+ + BCM1480_DUART_CHANREG_SPACING*((chan)&1) \
+ + (reg))
+#define R_BCM1480_DUART_CHANREG(chan,reg) (BCM1480_DUART_CHANREG_SPACING*((chan)&1) + (reg))
+
+#define R_BCM1480_DUART_IMRREG(chan) (R_DUART_IMR_A + ((chan)&1)*DUART_IMRISR_SPACING)
+#define R_BCM1480_DUART_ISRREG(chan) (R_DUART_ISR_A + ((chan)&1)*DUART_IMRISR_SPACING)
+
+#define A_BCM1480_DUART_IMRREG(chan) (A_BCM1480_DUART(chan) + R_BCM1480_DUART_IMRREG(chan))
+#define A_BCM1480_DUART_ISRREG(chan) (A_BCM1480_DUART(chan) + R_BCM1480_DUART_ISRREG(chan))
+
+/*
+ * These constants are the absolute addresses.
+ */
+
+#define A_BCM1480_DUART_MODE_REG_1_C 0x0010060400
+#define A_BCM1480_DUART_MODE_REG_2_C 0x0010060410
+#define A_BCM1480_DUART_STATUS_C 0x0010060420
+#define A_BCM1480_DUART_CLK_SEL_C 0x0010060430
+#define A_BCM1480_DUART_FULL_CTL_C 0x0010060440
+#define A_BCM1480_DUART_CMD_C 0x0010060450
+#define A_BCM1480_DUART_RX_HOLD_C 0x0010060460
+#define A_BCM1480_DUART_TX_HOLD_C 0x0010060470
+#define A_BCM1480_DUART_OPCR_C 0x0010060480
+#define A_BCM1480_DUART_AUX_CTRL_C 0x0010060490
+
+#define A_BCM1480_DUART_MODE_REG_1_D 0x0010060500
+#define A_BCM1480_DUART_MODE_REG_2_D 0x0010060510
+#define A_BCM1480_DUART_STATUS_D 0x0010060520
+#define A_BCM1480_DUART_CLK_SEL_D 0x0010060530
+#define A_BCM1480_DUART_FULL_CTL_D 0x0010060540
+#define A_BCM1480_DUART_CMD_D 0x0010060550
+#define A_BCM1480_DUART_RX_HOLD_D 0x0010060560
+#define A_BCM1480_DUART_TX_HOLD_D 0x0010060570
+#define A_BCM1480_DUART_OPCR_D 0x0010060580
+#define A_BCM1480_DUART_AUX_CTRL_D 0x0010060590
+
+#define A_BCM1480_DUART_INPORT_CHNG_CD 0x0010060600
+#define A_BCM1480_DUART_AUX_CTRL_CD 0x0010060610
+#define A_BCM1480_DUART_ISR_C 0x0010060620
+#define A_BCM1480_DUART_IMR_C 0x0010060630
+#define A_BCM1480_DUART_ISR_D 0x0010060640
+#define A_BCM1480_DUART_IMR_D 0x0010060650
+#define A_BCM1480_DUART_OUT_PORT_CD 0x0010060660
+#define A_BCM1480_DUART_OPCR_CD 0x0010060670
+#define A_BCM1480_DUART_IN_PORT_CD 0x0010060680
+#define A_BCM1480_DUART_ISR_CD 0x0010060690
+#define A_BCM1480_DUART_IMR_CD 0x00100606A0
+#define A_BCM1480_DUART_SET_OPR_CD 0x00100606B0
+#define A_BCM1480_DUART_CLEAR_OPR_CD 0x00100606C0
+#define A_BCM1480_DUART_INPORT_CHNG_C 0x00100606D0
+#define A_BCM1480_DUART_INPORT_CHNG_D 0x00100606E0
+
+
+/* *********************************************************************
+ * Generic Bus Registers (Section 15) and PCMCIA Registers (Section 16)
+ ********************************************************************* */
+
+#define A_BCM1480_IO_PCMCIA_CFG_B 0x0010061A58
+#define A_BCM1480_IO_PCMCIA_STATUS_B 0x0010061A68
+
+/* *********************************************************************
+ * GPIO Registers (Section 17)
+ ********************************************************************* */
+
+/* One additional GPIO register, placed _before_ the BCM1250's GPIO block base */
+
+#define A_BCM1480_GPIO_INT_ADD_TYPE 0x0010061A78
+#define R_BCM1480_GPIO_INT_ADD_TYPE (-8)
+
+#define A_GPIO_INT_ADD_TYPE A_BCM1480_GPIO_INT_ADD_TYPE
+#define R_GPIO_INT_ADD_TYPE R_BCM1480_GPIO_INT_ADD_TYPE
+
+/* *********************************************************************
+ * SMBus Registers (Section 18)
+ ********************************************************************* */
+
+/* No changes from BCM1250 */
+
+/* *********************************************************************
+ * Timer Registers (Sections 4.6)
+ ********************************************************************* */
+
+/* BCM1480 has two additional watchdogs */
+
+/* Watchdog timers */
+
+#define A_BCM1480_SCD_WDOG_2 0x0010022050
+#define A_BCM1480_SCD_WDOG_3 0x0010022150
+
+#define BCM1480_SCD_NUM_WDOGS 4
+
+#define A_BCM1480_SCD_WDOG_BASE(w) (A_BCM1480_SCD_WDOG_0+((w)&2)*0x1000 + ((w)&1)*0x100)
+#define A_BCM1480_SCD_WDOG_REGISTER(w,r) (A_BCM1480_SCD_WDOG_BASE(w) + (r))
+
+#define A_BCM1480_SCD_WDOG_INIT_2 0x0010022050
+#define A_BCM1480_SCD_WDOG_CNT_2 0x0010022058
+#define A_BCM1480_SCD_WDOG_CFG_2 0x0010022060
+
+#define A_BCM1480_SCD_WDOG_INIT_3 0x0010022150
+#define A_BCM1480_SCD_WDOG_CNT_3 0x0010022158
+#define A_BCM1480_SCD_WDOG_CFG_3 0x0010022160
+
+/* BCM1480 has two additional compare registers */
+
+#define A_BCM1480_SCD_ZBBUS_CYCLE_COUNT A_SCD_ZBBUS_CYCLE_COUNT
+#define A_BCM1480_SCD_ZBBUS_CYCLE_CP_BASE 0x0010020C00
+#define A_BCM1480_SCD_ZBBUS_CYCLE_CP0 A_SCD_ZBBUS_CYCLE_CP0
+#define A_BCM1480_SCD_ZBBUS_CYCLE_CP1 A_SCD_ZBBUS_CYCLE_CP1
+#define A_BCM1480_SCD_ZBBUS_CYCLE_CP2 0x0010020C10
+#define A_BCM1480_SCD_ZBBUS_CYCLE_CP3 0x0010020C18
+
+/* *********************************************************************
+ * System Control Registers (Section 4.2)
+ ********************************************************************* */
+
+/* Scratch register in different place */
+
+#define A_BCM1480_SCD_SCRATCH 0x100200A0
+
+/* *********************************************************************
+ * System Address Trap Registers (Section 4.9)
+ ********************************************************************* */
+
+/* No changes from BCM1250 */
+
+/* *********************************************************************
+ * System Interrupt Mapper Registers (Sections 4.3-4.5)
+ ********************************************************************* */
+
+#define A_BCM1480_IMR_CPU0_BASE 0x0010020000
+#define A_BCM1480_IMR_CPU1_BASE 0x0010022000
+#define A_BCM1480_IMR_CPU2_BASE 0x0010024000
+#define A_BCM1480_IMR_CPU3_BASE 0x0010026000
+#define BCM1480_IMR_REGISTER_SPACING 0x2000
+#define BCM1480_IMR_REGISTER_SPACING_SHIFT 13
+
+#define A_BCM1480_IMR_MAPPER(cpu) (A_BCM1480_IMR_CPU0_BASE+(cpu)*BCM1480_IMR_REGISTER_SPACING)
+#define A_BCM1480_IMR_REGISTER(cpu,reg) (A_BCM1480_IMR_MAPPER(cpu)+(reg))
+
+/* Most IMR registers are 128 bits, implemented as non-contiguous
+ 64-bit registers high (_H) and low (_L) */
+#define BCM1480_IMR_HL_SPACING 0x1000
+
+#define R_BCM1480_IMR_INTERRUPT_DIAG_H 0x0010
+#define R_BCM1480_IMR_LDT_INTERRUPT_H 0x0018
+#define R_BCM1480_IMR_LDT_INTERRUPT_CLR_H 0x0020
+#define R_BCM1480_IMR_INTERRUPT_MASK_H 0x0028
+#define R_BCM1480_IMR_INTERRUPT_TRACE_H 0x0038
+#define R_BCM1480_IMR_INTERRUPT_SOURCE_STATUS_H 0x0040
+#define R_BCM1480_IMR_LDT_INTERRUPT_SET 0x0048
+#define R_BCM1480_IMR_MAILBOX_0_CPU 0x00C0
+#define R_BCM1480_IMR_MAILBOX_0_SET_CPU 0x00C8
+#define R_BCM1480_IMR_MAILBOX_0_CLR_CPU 0x00D0
+#define R_BCM1480_IMR_MAILBOX_1_CPU 0x00E0
+#define R_BCM1480_IMR_MAILBOX_1_SET_CPU 0x00E8
+#define R_BCM1480_IMR_MAILBOX_1_CLR_CPU 0x00F0
+#define R_BCM1480_IMR_INTERRUPT_STATUS_BASE_H 0x0100
+#define BCM1480_IMR_INTERRUPT_STATUS_COUNT 8
+#define R_BCM1480_IMR_INTERRUPT_MAP_BASE_H 0x0200
+#define BCM1480_IMR_INTERRUPT_MAP_COUNT 64
+
+#define R_BCM1480_IMR_INTERRUPT_DIAG_L 0x1010
+#define R_BCM1480_IMR_LDT_INTERRUPT_L 0x1018
+#define R_BCM1480_IMR_LDT_INTERRUPT_CLR_L 0x1020
+#define R_BCM1480_IMR_INTERRUPT_MASK_L 0x1028
+#define R_BCM1480_IMR_INTERRUPT_TRACE_L 0x1038
+#define R_BCM1480_IMR_INTERRUPT_SOURCE_STATUS_L 0x1040
+#define R_BCM1480_IMR_INTERRUPT_STATUS_BASE_L 0x1100
+#define R_BCM1480_IMR_INTERRUPT_MAP_BASE_L 0x1200
+
+#define A_BCM1480_IMR_ALIAS_MAILBOX_CPU0_BASE 0x0010028000
+#define A_BCM1480_IMR_ALIAS_MAILBOX_CPU1_BASE 0x0010028100
+#define A_BCM1480_IMR_ALIAS_MAILBOX_CPU2_BASE 0x0010028200
+#define A_BCM1480_IMR_ALIAS_MAILBOX_CPU3_BASE 0x0010028300
+#define BCM1480_IMR_ALIAS_MAILBOX_SPACING 0100
+
+#define A_BCM1480_IMR_ALIAS_MAILBOX(cpu) (A_BCM1480_IMR_ALIAS_MAILBOX_CPU0_BASE + \
+ (cpu)*BCM1480_IMR_ALIAS_MAILBOX_SPACING)
+#define A_BCM1480_IMR_ALIAS_MAILBOX_REGISTER(cpu,reg) (A_BCM1480_IMR_ALIAS_MAILBOX(cpu)+(reg))
+
+#define R_BCM1480_IMR_ALIAS_MAILBOX_0 0x0000 /* 0x0x0 */
+#define R_BCM1480_IMR_ALIAS_MAILBOX_0_SET 0x0008 /* 0x0x8 */
+
+/* *********************************************************************
+ * System Performance Counter Registers (Section 4.7)
+ ********************************************************************* */
+
+/* BCM1480 has four more performance counter registers, and two control
+ registers. */
+
+#define A_BCM1480_SCD_PERF_CNT_BASE 0x00100204C0
+
+#define A_BCM1480_SCD_PERF_CNT_CFG0 0x00100204C0
+#define A_BCM1480_SCD_PERF_CNT_CFG_0 A_BCM1480_SCD_PERF_CNT_CFG0
+#define A_BCM1480_SCD_PERF_CNT_CFG1 0x00100204C8
+#define A_BCM1480_SCD_PERF_CNT_CFG_1 A_BCM1480_SCD_PERF_CNT_CFG1
+
+#define A_BCM1480_SCD_PERF_CNT_0 A_SCD_PERF_CNT_0
+#define A_BCM1480_SCD_PERF_CNT_1 A_SCD_PERF_CNT_1
+#define A_BCM1480_SCD_PERF_CNT_2 A_SCD_PERF_CNT_2
+#define A_BCM1480_SCD_PERF_CNT_3 A_SCD_PERF_CNT_3
+
+#define A_BCM1480_SCD_PERF_CNT_4 0x00100204F0
+#define A_BCM1480_SCD_PERF_CNT_5 0x00100204F8
+#define A_BCM1480_SCD_PERF_CNT_6 0x0010020500
+#define A_BCM1480_SCD_PERF_CNT_7 0x0010020508
+
+/* *********************************************************************
+ * System Bus Watcher Registers (Section 4.8)
+ ********************************************************************* */
+
+
+/* Same as 1250 except BUS_ERR_STATUS_DEBUG is in a different place. */
+
+#define A_BCM1480_BUS_ERR_STATUS_DEBUG 0x00100208D8
+
+/* *********************************************************************
+ * System Debug Controller Registers (Section 19)
+ ********************************************************************* */
+
+/* Same as 1250 */
+
+/* *********************************************************************
+ * System Trace Unit Registers (Sections 4.10)
+ ********************************************************************* */
+
+/* Same as 1250 */
+
+/* *********************************************************************
+ * Data Mover DMA Registers (Section 10.7)
+ ********************************************************************* */
+
+/* Same as 1250 */
+
+
+/* *********************************************************************
+ * HyperTransport Interface Registers (Section 8)
+ ********************************************************************* */
+
+#define BCM1480_HT_NUM_PORTS 3
+#define BCM1480_HT_PORT_SPACING 0x800
+#define A_BCM1480_HT_PORT_HEADER(x) (A_BCM1480_HT_PORT0_HEADER + ((x)*BCM1480_HT_PORT_SPACING))
+
+#define A_BCM1480_HT_PORT0_HEADER 0x00FE000000
+#define A_BCM1480_HT_PORT1_HEADER 0x00FE000800
+#define A_BCM1480_HT_PORT2_HEADER 0x00FE001000
+#define A_BCM1480_HT_TYPE00_HEADER 0x00FE002000
+
+
+/* *********************************************************************
+ * Node Controller Registers (Section 9)
+ ********************************************************************* */
+
+#define A_BCM1480_NC_BASE 0x00DFBD0000
+
+#define A_BCM1480_NC_RLD_FIELD 0x00DFBD0000
+#define A_BCM1480_NC_RLD_TRIGGER 0x00DFBD0020
+#define A_BCM1480_NC_RLD_BAD_ERROR 0x00DFBD0040
+#define A_BCM1480_NC_RLD_COR_ERROR 0x00DFBD0060
+#define A_BCM1480_NC_RLD_ECC_STATUS 0x00DFBD0080
+#define A_BCM1480_NC_RLD_WAY_ENABLE 0x00DFBD00A0
+#define A_BCM1480_NC_RLD_RANDOM_LFSR 0x00DFBD00C0
+
+#define A_BCM1480_NC_INTERRUPT_STATUS 0x00DFBD00E0
+#define A_BCM1480_NC_INTERRUPT_ENABLE 0x00DFBD0100
+#define A_BCM1480_NC_TIMEOUT_COUNTER 0x00DFBD0120
+#define A_BCM1480_NC_TIMEOUT_COUNTER_SEL 0x00DFBD0140
+
+#define A_BCM1480_NC_CREDIT_STATUS_REG0 0x00DFBD0200
+#define A_BCM1480_NC_CREDIT_STATUS_REG1 0x00DFBD0220
+#define A_BCM1480_NC_CREDIT_STATUS_REG2 0x00DFBD0240
+#define A_BCM1480_NC_CREDIT_STATUS_REG3 0x00DFBD0260
+#define A_BCM1480_NC_CREDIT_STATUS_REG4 0x00DFBD0280
+#define A_BCM1480_NC_CREDIT_STATUS_REG5 0x00DFBD02A0
+#define A_BCM1480_NC_CREDIT_STATUS_REG6 0x00DFBD02C0
+#define A_BCM1480_NC_CREDIT_STATUS_REG7 0x00DFBD02E0
+#define A_BCM1480_NC_CREDIT_STATUS_REG8 0x00DFBD0300
+#define A_BCM1480_NC_CREDIT_STATUS_REG9 0x00DFBD0320
+#define A_BCM1480_NC_CREDIT_STATUS_REG10 0x00DFBE0000
+#define A_BCM1480_NC_CREDIT_STATUS_REG11 0x00DFBE0020
+#define A_BCM1480_NC_CREDIT_STATUS_REG12 0x00DFBE0040
+
+#define A_BCM1480_NC_SR_TIMEOUT_COUNTER 0x00DFBE0060
+#define A_BCM1480_NC_SR_TIMEOUT_COUNTER_SEL 0x00DFBE0080
+
+
+/* *********************************************************************
+ * H&R Block Configuration Registers (Section 12.4)
+ ********************************************************************* */
+
+#define A_BCM1480_HR_BASE_0 0x00DF820000
+#define A_BCM1480_HR_BASE_1 0x00DF8A0000
+#define A_BCM1480_HR_BASE_2 0x00DF920000
+#define BCM1480_HR_REGISTER_SPACING 0x80000
+
+#define A_BCM1480_HR_BASE(idx) (A_BCM1480_HR_BASE_0 + ((idx)*BCM1480_HR_REGISTER_SPACING))
+#define A_BCM1480_HR_REGISTER(idx,reg) (A_BCM1480_HR_BASE(idx) + (reg))
+
+#define R_BCM1480_HR_CFG 0x0000000000
+
+#define R_BCM1480_HR_MAPPING 0x0000010010
+
+#define BCM1480_HR_RULE_SPACING 0x0000000010
+#define BCM1480_HR_NUM_RULES 16
+#define BCM1480_HR_OP_OFFSET 0x0000000100
+#define BCM1480_HR_TYPE_OFFSET 0x0000000108
+#define R_BCM1480_HR_RULE_OP(idx) (BCM1480_HR_OP_OFFSET + ((idx)*BCM1480_HR_RULE_SPACING))
+#define R_BCM1480_HR_RULE_TYPE(idx) (BCM1480_HR_TYPE_OFFSET + ((idx)*BCM1480_HR_RULE_SPACING))
+
+#define BCM1480_HR_LEAF_SPACING 0x0000000010
+#define BCM1480_HR_NUM_LEAVES 10
+#define BCM1480_HR_LEAF_OFFSET 0x0000000300
+#define R_BCM1480_HR_HA_LEAF0(idx) (BCM1480_HR_LEAF_OFFSET + ((idx)*BCM1480_HR_LEAF_SPACING))
+
+#define R_BCM1480_HR_EX_LEAF0 0x00000003A0
+
+#define BCM1480_HR_PATH_SPACING 0x0000000010
+#define BCM1480_HR_NUM_PATHS 16
+#define BCM1480_HR_PATH_OFFSET 0x0000000600
+#define R_BCM1480_HR_PATH(idx) (BCM1480_HR_PATH_OFFSET + ((idx)*BCM1480_HR_PATH_SPACING))
+
+#define R_BCM1480_HR_PATH_DEFAULT 0x0000000700
+
+#define BCM1480_HR_ROUTE_SPACING 8
+#define BCM1480_HR_NUM_ROUTES 512
+#define BCM1480_HR_ROUTE_OFFSET 0x0000001000
+#define R_BCM1480_HR_RT_WORD(idx) (BCM1480_HR_ROUTE_OFFSET + ((idx)*BCM1480_HR_ROUTE_SPACING))
+
+
+/* checked to here - ehs */
+/* *********************************************************************
+ * Packet Manager DMA Registers (Section 12.5)
+ ********************************************************************* */
+
+#define A_BCM1480_PM_BASE 0x0010056000
+
+#define A_BCM1480_PMI_LCL_0 0x0010058000
+#define A_BCM1480_PMO_LCL_0 0x001005C000
+#define A_BCM1480_PMI_OFFSET_0 (A_BCM1480_PMI_LCL_0 - A_BCM1480_PM_BASE)
+#define A_BCM1480_PMO_OFFSET_0 (A_BCM1480_PMO_LCL_0 - A_BCM1480_PM_BASE)
+
+#define BCM1480_PM_LCL_REGISTER_SPACING 0x100
+#define BCM1480_PM_NUM_CHANNELS 32
+
+#define A_BCM1480_PMI_LCL_BASE(idx) (A_BCM1480_PMI_LCL_0 + ((idx)*BCM1480_PM_LCL_REGISTER_SPACING))
+#define A_BCM1480_PMI_LCL_REGISTER(idx,reg) (A_BCM1480_PMI_LCL_BASE(idx) + (reg))
+#define A_BCM1480_PMO_LCL_BASE(idx) (A_BCM1480_PMO_LCL_0 + ((idx)*BCM1480_PM_LCL_REGISTER_SPACING))
+#define A_BCM1480_PMO_LCL_REGISTER(idx,reg) (A_BCM1480_PMO_LCL_BASE(idx) + (reg))
+
+#define BCM1480_PM_INT_PACKING 8
+#define BCM1480_PM_INT_FUNCTION_SPACING 0x40
+#define BCM1480_PM_INT_NUM_FUNCTIONS 3
+
+/*
+ * DMA channel registers relative to A_BCM1480_PMI_LCL_BASE(n) and A_BCM1480_PMO_LCL_BASE(n)
+ */
+
+#define R_BCM1480_PM_BASE_SIZE 0x0000000000
+#define R_BCM1480_PM_CNT 0x0000000008
+#define R_BCM1480_PM_PFCNT 0x0000000010
+#define R_BCM1480_PM_LAST 0x0000000018
+#define R_BCM1480_PM_PFINDX 0x0000000020
+#define R_BCM1480_PM_INT_WMK 0x0000000028
+#define R_BCM1480_PM_CONFIG0 0x0000000030
+#define R_BCM1480_PM_LOCALDEBUG 0x0000000078
+#define R_BCM1480_PM_CACHEABILITY 0x0000000080 /* PMI only */
+#define R_BCM1480_PM_INT_CNFG 0x0000000088
+#define R_BCM1480_PM_DESC_MERGE_TIMER 0x0000000090
+#define R_BCM1480_PM_LOCALDEBUG_PIB 0x00000000F8 /* PMI only */
+#define R_BCM1480_PM_LOCALDEBUG_POB 0x00000000F8 /* PMO only */
+
+/*
+ * Global Registers (Not Channelized)
+ */
+
+#define A_BCM1480_PMI_GLB_0 0x0010056000
+#define A_BCM1480_PMO_GLB_0 0x0010057000
+
+/*
+ * PM to TX Mapping Register relative to A_BCM1480_PMI_GLB_0 and A_BCM1480_PMO_GLB_0
+ */
+
+#define R_BCM1480_PM_PMO_MAPPING 0x00000008C8 /* PMO only */
+
+#define A_BCM1480_PM_PMO_MAPPING (A_BCM1480_PMO_GLB_0 + R_BCM1480_PM_PMO_MAPPING)
+
+/*
+ * Interrupt mapping registers
+ */
+
+
+#define A_BCM1480_PMI_INT_0 0x0010056800
+#define A_BCM1480_PMI_INT(q) (A_BCM1480_PMI_INT_0 + ((q>>8)<<8))
+#define A_BCM1480_PMI_INT_OFFSET_0 (A_BCM1480_PMI_INT_0 - A_BCM1480_PM_BASE)
+#define A_BCM1480_PMO_INT_0 0x0010057800
+#define A_BCM1480_PMO_INT(q) (A_BCM1480_PMO_INT_0 + ((q>>8)<<8))
+#define A_BCM1480_PMO_INT_OFFSET_0 (A_BCM1480_PMO_INT_0 - A_BCM1480_PM_BASE)
+
+/*
+ * Interrupt registers relative to A_BCM1480_PMI_INT_0 and A_BCM1480_PMO_INT_0
+ */
+
+#define R_BCM1480_PM_INT_ST 0x0000000000
+#define R_BCM1480_PM_INT_MSK 0x0000000040
+#define R_BCM1480_PM_INT_CLR 0x0000000080
+#define R_BCM1480_PM_MRGD_INT 0x00000000C0
+
+/*
+ * Debug registers (global)
+ */
+
+#define A_BCM1480_PM_GLOBALDEBUGMODE_PMI 0x0010056000
+#define A_BCM1480_PM_GLOBALDEBUG_PID 0x00100567F8
+#define A_BCM1480_PM_GLOBALDEBUG_PIB 0x0010056FF8
+#define A_BCM1480_PM_GLOBALDEBUGMODE_PMO 0x0010057000
+#define A_BCM1480_PM_GLOBALDEBUG_POD 0x00100577F8
+#define A_BCM1480_PM_GLOBALDEBUG_POB 0x0010057FF8
+
+/* *********************************************************************
+ * Switch performance counters
+ ********************************************************************* */
+
+#define A_BCM1480_SWPERF_CFG 0xdfb91800
+#define A_BCM1480_SWPERF_CNT0 0xdfb91880
+#define A_BCM1480_SWPERF_CNT1 0xdfb91888
+#define A_BCM1480_SWPERF_CNT2 0xdfb91890
+#define A_BCM1480_SWPERF_CNT3 0xdfb91898
+
+
+/* *********************************************************************
+ * Switch Trace Unit
+ ********************************************************************* */
+
+#define A_BCM1480_SWTRC_MATCH_CONTROL_0 0xDFB91000
+#define A_BCM1480_SWTRC_MATCH_DATA_VALUE_0 0xDFB91100
+#define A_BCM1480_SWTRC_MATCH_DATA_MASK_0 0xDFB91108
+#define A_BCM1480_SWTRC_MATCH_TAG_VALUE_0 0xDFB91200
+#define A_BCM1480_SWTRC_MATCH_TAG_MAKS_0 0xDFB91208
+#define A_BCM1480_SWTRC_EVENT_0 0xDFB91300
+#define A_BCM1480_SWTRC_SEQUENCE_0 0xDFB91400
+
+#define A_BCM1480_SWTRC_CFG 0xDFB91500
+#define A_BCM1480_SWTRC_READ 0xDFB91508
+
+#define A_BCM1480_SWDEBUG_SCHEDSTOP 0xDFB92000
+
+#define A_BCM1480_SWTRC_MATCH_CONTROL(x) (A_BCM1480_SWTRC_MATCH_CONTROL_0 + ((x)*8))
+#define A_BCM1480_SWTRC_EVENT(x) (A_BCM1480_SWTRC_EVENT_0 + ((x)*8))
+#define A_BCM1480_SWTRC_SEQUENCE(x) (A_BCM1480_SWTRC_SEQUENCE_0 + ((x)*8))
+
+#define A_BCM1480_SWTRC_MATCH_DATA_VALUE(x) (A_BCM1480_SWTRC_MATCH_DATA_VALUE_0 + ((x)*16))
+#define A_BCM1480_SWTRC_MATCH_DATA_MASK(x) (A_BCM1480_SWTRC_MATCH_DATA_MASK_0 + ((x)*16))
+#define A_BCM1480_SWTRC_MATCH_TAG_VALUE(x) (A_BCM1480_SWTRC_MATCH_TAG_VALUE_0 + ((x)*16))
+#define A_BCM1480_SWTRC_MATCH_TAG_MASK(x) (A_BCM1480_SWTRC_MATCH_TAG_MASK_0 + ((x)*16))
+
+
+
+/* *********************************************************************
+ * High-Speed Port Registers (Section 13)
+ ********************************************************************* */
+
+#define A_BCM1480_HSP_BASE_0 0x00DF810000
+#define A_BCM1480_HSP_BASE_1 0x00DF890000
+#define A_BCM1480_HSP_BASE_2 0x00DF910000
+#define BCM1480_HSP_REGISTER_SPACING 0x80000
+
+#define A_BCM1480_HSP_BASE(idx) (A_BCM1480_HSP_BASE_0 + ((idx)*BCM1480_HSP_REGISTER_SPACING))
+#define A_BCM1480_HSP_REGISTER(idx,reg) (A_BCM1480_HSP_BASE(idx) + (reg))
+
+#define R_BCM1480_HSP_RX_SPI4_CFG_0 0x0000000000
+#define R_BCM1480_HSP_RX_SPI4_CFG_1 0x0000000008
+#define R_BCM1480_HSP_RX_SPI4_DESKEW_OVERRIDE 0x0000000010
+#define R_BCM1480_HSP_RX_SPI4_DESKEW_DATAPATH 0x0000000018
+#define R_BCM1480_HSP_RX_SPI4_PORT_INT_EN 0x0000000020
+#define R_BCM1480_HSP_RX_SPI4_PORT_INT_STATUS 0x0000000028
+
+#define R_BCM1480_HSP_RX_SPI4_CALENDAR_0 0x0000000200
+#define R_BCM1480_HSP_RX_SPI4_CALENDAR_1 0x0000000208
+
+#define R_BCM1480_HSP_RX_PLL_CNFG 0x0000000800
+#define R_BCM1480_HSP_RX_CALIBRATION 0x0000000808
+#define R_BCM1480_HSP_RX_TEST 0x0000000810
+#define R_BCM1480_HSP_RX_DIAG_DETAILS 0x0000000818
+#define R_BCM1480_HSP_RX_DIAG_CRC_0 0x0000000820
+#define R_BCM1480_HSP_RX_DIAG_CRC_1 0x0000000828
+#define R_BCM1480_HSP_RX_DIAG_HTCMD 0x0000000830
+#define R_BCM1480_HSP_RX_DIAG_PKTCTL 0x0000000838
+
+#define R_BCM1480_HSP_RX_VIS_FLCTRL_COUNTER 0x0000000870
+
+#define R_BCM1480_HSP_RX_PKT_RAMALLOC_0 0x0000020020
+#define R_BCM1480_HSP_RX_PKT_RAMALLOC_1 0x0000020028
+#define R_BCM1480_HSP_RX_PKT_RAMALLOC_2 0x0000020030
+#define R_BCM1480_HSP_RX_PKT_RAMALLOC_3 0x0000020038
+#define R_BCM1480_HSP_RX_PKT_RAMALLOC_4 0x0000020040
+#define R_BCM1480_HSP_RX_PKT_RAMALLOC_5 0x0000020048
+#define R_BCM1480_HSP_RX_PKT_RAMALLOC_6 0x0000020050
+#define R_BCM1480_HSP_RX_PKT_RAMALLOC_7 0x0000020058
+#define R_BCM1480_HSP_RX_PKT_RAMALLOC(idx) (R_BCM1480_HSP_RX_PKT_RAMALLOC_0 + 8*(idx))
+
+/* XXX Following registers were shuffled. Renamed/renumbered per errata. */
+#define R_BCM1480_HSP_RX_HT_RAMALLOC_0 0x0000020078
+#define R_BCM1480_HSP_RX_HT_RAMALLOC_1 0x0000020080
+#define R_BCM1480_HSP_RX_HT_RAMALLOC_2 0x0000020088
+#define R_BCM1480_HSP_RX_HT_RAMALLOC_3 0x0000020090
+#define R_BCM1480_HSP_RX_HT_RAMALLOC_4 0x0000020098
+#define R_BCM1480_HSP_RX_HT_RAMALLOC_5 0x00000200A0
+
+#define R_BCM1480_HSP_RX_SPI_WATERMARK_0 0x00000200B0
+#define R_BCM1480_HSP_RX_SPI_WATERMARK_1 0x00000200B8
+#define R_BCM1480_HSP_RX_SPI_WATERMARK_2 0x00000200C0
+#define R_BCM1480_HSP_RX_SPI_WATERMARK_3 0x00000200C8
+#define R_BCM1480_HSP_RX_SPI_WATERMARK_4 0x00000200D0
+#define R_BCM1480_HSP_RX_SPI_WATERMARK_5 0x00000200D8
+#define R_BCM1480_HSP_RX_SPI_WATERMARK_6 0x00000200E0
+#define R_BCM1480_HSP_RX_SPI_WATERMARK_7 0x00000200E8
+#define R_BCM1480_HSP_RX_SPI_WATERMARK(idx) (R_BCM1480_HSP_RX_SPI_WATERMARK_0 + 8*(idx))
+
+#define R_BCM1480_HSP_RX_VIS_CMDQ_0 0x00000200F0
+#define R_BCM1480_HSP_RX_VIS_CMDQ_1 0x00000200F8
+#define R_BCM1480_HSP_RX_VIS_CMDQ_2 0x0000020100
+#define R_BCM1480_HSP_RX_RAM_READCTL 0x0000020108
+#define R_BCM1480_HSP_RX_RAM_READWINDOW 0x0000020110
+#define R_BCM1480_HSP_RX_RF_READCTL 0x0000020118
+#define R_BCM1480_HSP_RX_RF_READWINDOW 0x0000020120
+
+#define R_BCM1480_HSP_TX_SPI4_CFG_0 0x0000040000
+#define R_BCM1480_HSP_TX_SPI4_CFG_1 0x0000040008
+#define R_BCM1480_HSP_TX_SPI4_TRAINING_FMT 0x0000040010
+
+#define R_BCM1480_HSP_TX_PKT_RAMALLOC_0 0x0000040020
+#define R_BCM1480_HSP_TX_PKT_RAMALLOC_1 0x0000040028
+#define R_BCM1480_HSP_TX_PKT_RAMALLOC_2 0x0000040030
+#define R_BCM1480_HSP_TX_PKT_RAMALLOC_3 0x0000040038
+#define R_BCM1480_HSP_TX_PKT_RAMALLOC_4 0x0000040040
+#define R_BCM1480_HSP_TX_PKT_RAMALLOC_5 0x0000040048
+#define R_BCM1480_HSP_TX_PKT_RAMALLOC_6 0x0000040050
+#define R_BCM1480_HSP_TX_PKT_RAMALLOC_7 0x0000040058
+#define R_BCM1480_HSP_TX_PKT_RAMALLOC(idx) (R_BCM1480_HSP_TX_PKT_RAMALLOC_0 + 8*(idx))
+#define R_BCM1480_HSP_TX_NPC_RAMALLOC 0x0000040078
+#define R_BCM1480_HSP_TX_RSP_RAMALLOC 0x0000040080
+#define R_BCM1480_HSP_TX_PC_RAMALLOC 0x0000040088
+#define R_BCM1480_HSP_TX_HTCC_RAMALLOC_0 0x0000040090
+#define R_BCM1480_HSP_TX_HTCC_RAMALLOC_1 0x0000040098
+#define R_BCM1480_HSP_TX_HTCC_RAMALLOC_2 0x00000400A0
+
+#define R_BCM1480_HSP_TX_PKT_RXPHITCNT_0 0x00000400B0
+#define R_BCM1480_HSP_TX_PKT_RXPHITCNT_1 0x00000400B8
+#define R_BCM1480_HSP_TX_PKT_RXPHITCNT_2 0x00000400C0
+#define R_BCM1480_HSP_TX_PKT_RXPHITCNT_3 0x00000400C8
+#define R_BCM1480_HSP_TX_PKT_RXPHITCNT(idx) (R_BCM1480_HSP_TX_PKT_RXPHITCNT_0 + 8*(idx))
+#define R_BCM1480_HSP_TX_HTIO_RXPHITCNT 0x00000400D0
+#define R_BCM1480_HSP_TX_HTCC_RXPHITCNT 0x00000400D8
+
+#define R_BCM1480_HSP_TX_PKT_TXPHITCNT_0 0x00000400E0
+#define R_BCM1480_HSP_TX_PKT_TXPHITCNT_1 0x00000400E8
+#define R_BCM1480_HSP_TX_PKT_TXPHITCNT_2 0x00000400F0
+#define R_BCM1480_HSP_TX_PKT_TXPHITCNT_3 0x00000400F8
+#define R_BCM1480_HSP_TX_PKT_TXPHITCNT(idx) (R_BCM1480_HSP_TX_PKT_TXPHITCNT_0 + 8*(idx))
+#define R_BCM1480_HSP_TX_HTIO_TXPHITCNT 0x0000040100
+#define R_BCM1480_HSP_TX_HTCC_TXPHITCNT 0x0000040108
+
+#define R_BCM1480_HSP_TX_SPI4_CALENDAR_0 0x0000040200
+#define R_BCM1480_HSP_TX_SPI4_CALENDAR_1 0x0000040208
+
+#define R_BCM1480_HSP_TX_PLL_CNFG 0x0000040800
+#define R_BCM1480_HSP_TX_CALIBRATION 0x0000040808
+#define R_BCM1480_HSP_TX_TEST 0x0000040810
+
+#define R_BCM1480_HSP_TX_VIS_CMDQ_0 0x0000040840
+#define R_BCM1480_HSP_TX_VIS_CMDQ_1 0x0000040848
+#define R_BCM1480_HSP_TX_VIS_CMDQ_2 0x0000040850
+#define R_BCM1480_HSP_TX_RAM_READCTL 0x0000040860
+#define R_BCM1480_HSP_TX_RAM_READWINDOW 0x0000040868
+#define R_BCM1480_HSP_TX_RF_READCTL 0x0000040870
+#define R_BCM1480_HSP_TX_RF_READWINDOW 0x0000040878
+
+#define R_BCM1480_HSP_TX_SPI4_PORT_INT_STATUS 0x0000040880
+#define R_BCM1480_HSP_TX_SPI4_PORT_INT_EN 0x0000040888
+
+#define R_BCM1480_HSP_TX_NEXT_ADDR_BASE 0x000040400
+#define R_BCM1480_HSP_TX_NEXT_ADDR_REGISTER(x) (R_BCM1480_HSP_TX_NEXT_ADDR_BASE+ 8*(x))
+
+
+
+/* *********************************************************************
+ * Physical Address Map (Table 10 and Figure 7)
+ ********************************************************************* */
+
+#define A_BCM1480_PHYS_MEMORY_0 _SB_MAKE64(0x0000000000)
+#define A_BCM1480_PHYS_MEMORY_SIZE _SB_MAKE64((256*1024*1024))
+#define A_BCM1480_PHYS_SYSTEM_CTL _SB_MAKE64(0x0010000000)
+#define A_BCM1480_PHYS_IO_SYSTEM _SB_MAKE64(0x0010060000)
+#define A_BCM1480_PHYS_GENBUS _SB_MAKE64(0x0010090000)
+#define A_BCM1480_PHYS_GENBUS_END _SB_MAKE64(0x0028000000)
+#define A_BCM1480_PHYS_PCI_MISC_MATCH_BYTES _SB_MAKE64(0x0028000000)
+#define A_BCM1480_PHYS_PCI_IACK_MATCH_BYTES _SB_MAKE64(0x0029000000)
+#define A_BCM1480_PHYS_PCI_IO_MATCH_BYTES _SB_MAKE64(0x002C000000)
+#define A_BCM1480_PHYS_PCI_CFG_MATCH_BYTES _SB_MAKE64(0x002E000000)
+#define A_BCM1480_PHYS_PCI_OMAP_MATCH_BYTES _SB_MAKE64(0x002F000000)
+#define A_BCM1480_PHYS_PCI_MEM_MATCH_BYTES _SB_MAKE64(0x0030000000)
+#define A_BCM1480_PHYS_HT_MEM_MATCH_BYTES _SB_MAKE64(0x0040000000)
+#define A_BCM1480_PHYS_HT_MEM_MATCH_BITS _SB_MAKE64(0x0060000000)
+#define A_BCM1480_PHYS_MEMORY_1 _SB_MAKE64(0x0080000000)
+#define A_BCM1480_PHYS_MEMORY_2 _SB_MAKE64(0x0090000000)
+#define A_BCM1480_PHYS_PCI_MISC_MATCH_BITS _SB_MAKE64(0x00A8000000)
+#define A_BCM1480_PHYS_PCI_IACK_MATCH_BITS _SB_MAKE64(0x00A9000000)
+#define A_BCM1480_PHYS_PCI_IO_MATCH_BITS _SB_MAKE64(0x00AC000000)
+#define A_BCM1480_PHYS_PCI_CFG_MATCH_BITS _SB_MAKE64(0x00AE000000)
+#define A_BCM1480_PHYS_PCI_OMAP_MATCH_BITS _SB_MAKE64(0x00AF000000)
+#define A_BCM1480_PHYS_PCI_MEM_MATCH_BITS _SB_MAKE64(0x00B0000000)
+#define A_BCM1480_PHYS_MEMORY_3 _SB_MAKE64(0x00C0000000)
+#define A_BCM1480_PHYS_L2_CACHE_TEST _SB_MAKE64(0x00D0000000)
+#define A_BCM1480_PHYS_HT_SPECIAL_MATCH_BYTES _SB_MAKE64(0x00D8000000)
+#define A_BCM1480_PHYS_HT_IO_MATCH_BYTES _SB_MAKE64(0x00DC000000)
+#define A_BCM1480_PHYS_HT_CFG_MATCH_BYTES _SB_MAKE64(0x00DE000000)
+#define A_BCM1480_PHYS_HS_SUBSYS _SB_MAKE64(0x00DF000000)
+#define A_BCM1480_PHYS_HT_SPECIAL_MATCH_BITS _SB_MAKE64(0x00F8000000)
+#define A_BCM1480_PHYS_HT_IO_MATCH_BITS _SB_MAKE64(0x00FC000000)
+#define A_BCM1480_PHYS_HT_CFG_MATCH_BITS _SB_MAKE64(0x00FE000000)
+#define A_BCM1480_PHYS_MEMORY_EXP _SB_MAKE64(0x0100000000)
+#define A_BCM1480_PHYS_MEMORY_EXP_SIZE _SB_MAKE64((508*1024*1024*1024))
+#define A_BCM1480_PHYS_PCI_UPPER _SB_MAKE64(0x1000000000)
+#define A_BCM1480_PHYS_HT_UPPER_MATCH_BYTES _SB_MAKE64(0x2000000000)
+#define A_BCM1480_PHYS_HT_UPPER_MATCH_BITS _SB_MAKE64(0x3000000000)
+#define A_BCM1480_PHYS_HT_NODE_ALIAS _SB_MAKE64(0x4000000000)
+#define A_BCM1480_PHYS_HT_FULLACCESS _SB_MAKE64(0xF000000000)
+
+
+/* *********************************************************************
+ * L2 Cache as RAM (Table 54)
+ ********************************************************************* */
+
+#define A_BCM1480_PHYS_L2CACHE_WAY_SIZE _SB_MAKE64(0x0000020000)
+#define BCM1480_PHYS_L2CACHE_NUM_WAYS 8
+#define A_BCM1480_PHYS_L2CACHE_TOTAL_SIZE _SB_MAKE64(0x0000100000)
+#define A_BCM1480_PHYS_L2CACHE_WAY0 _SB_MAKE64(0x00D0300000)
+#define A_BCM1480_PHYS_L2CACHE_WAY1 _SB_MAKE64(0x00D0320000)
+#define A_BCM1480_PHYS_L2CACHE_WAY2 _SB_MAKE64(0x00D0340000)
+#define A_BCM1480_PHYS_L2CACHE_WAY3 _SB_MAKE64(0x00D0360000)
+#define A_BCM1480_PHYS_L2CACHE_WAY4 _SB_MAKE64(0x00D0380000)
+#define A_BCM1480_PHYS_L2CACHE_WAY5 _SB_MAKE64(0x00D03A0000)
+#define A_BCM1480_PHYS_L2CACHE_WAY6 _SB_MAKE64(0x00D03C0000)
+#define A_BCM1480_PHYS_L2CACHE_WAY7 _SB_MAKE64(0x00D03E0000)
+
+#endif /* _BCM1480_REGS_H */
Index: lmo/include/asm-mips/sibyte/bcm1480_scd.h
===================================================================
--- /dev/null 1970-01-01 00:00:00.000000000 +0000
+++ lmo/include/asm-mips/sibyte/bcm1480_scd.h 2005-10-19 22:34:11.000000000 -0700
@@ -0,0 +1,436 @@
+/* *********************************************************************
+ * BCM1280/BCM1400 Board Support Package
+ *
+ * SCD Constants and Macros File: bcm1480_scd.h
+ *
+ * This module contains constants and macros useful for
+ * manipulating the System Control and Debug module.
+ *
+ * BCM1400 specification level: 1X55_1X80-UM100-R (12/18/03)
+ *
+ *********************************************************************
+ *
+ * Copyright 2000,2001,2002,2003
+ * Broadcom Corporation. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ ********************************************************************* */
+
+#ifndef _BCM1480_SCD_H
+#define _BCM1480_SCD_H
+
+#include "sb1250_defs.h"
+
+/* *********************************************************************
+ * Pull in the BCM1250's SCD since lots of stuff is the same.
+ ********************************************************************* */
+
+#include "sb1250_scd.h"
+
+/* *********************************************************************
+ * Some general notes:
+ *
+ * This file is basically a "what's new" header file. Since the
+ * BCM1250 and the new BCM1480 (and derivatives) share many common
+ * features, this file contains only what's new or changed from
+ * the 1250. (above, you can see that we include the 1250 symbols
+ * to get the base functionality).
+ *
+ * In software, be sure to use the correct symbols, particularly
+ * for blocks that are different between the two chip families.
+ * All BCM1480-specific symbols have _BCM1480_ in their names,
+ * and all BCM1250-specific and "base" functions that are common in
+ * both chips have no special names (this is for compatibility with
+ * older include files). Therefore, if you're working with the
+ * SCD, which is very different on each chip, A_SCD_xxx implies
+ * the BCM1250 version and A_BCM1480_SCD_xxx implies the BCM1480
+ * version.
+ ********************************************************************* */
+
+/* *********************************************************************
+ * System control/debug registers
+ ********************************************************************* */
+
+/*
+ * System Identification and Revision Register (Table 12)
+ * Register: SCD_SYSTEM_REVISION
+ * This register is field compatible with the 1250.
+ */
+
+/*
+ * New part definitions
+ */
+
+#define K_SYS_PART_BCM1480 0x1406
+#define K_SYS_PART_BCM1280 0x1206
+#define K_SYS_PART_BCM1455 0x1407
+#define K_SYS_PART_BCM1255 0x1257
+
+/*
+ * Manufacturing Information Register (Table 14)
+ * Register: SCD_SYSTEM_MANUF
+ */
+
+/*
+ * System Configuration Register (Table 15)
+ * Register: SCD_SYSTEM_CFG
+ * Entire register is different from 1250, all new constants below
+ */
+
+#define M_BCM1480_SYS_RESERVED0 _SB_MAKEMASK1(0)
+#define M_BCM1480_SYS_HT_MINRSTCNT _SB_MAKEMASK1(1)
+#define M_BCM1480_SYS_RESERVED2 _SB_MAKEMASK1(2)
+#define M_BCM1480_SYS_RESERVED3 _SB_MAKEMASK1(3)
+#define M_BCM1480_SYS_RESERVED4 _SB_MAKEMASK1(4)
+#define M_BCM1480_SYS_IOB_DIV _SB_MAKEMASK1(5)
+
+#define S_BCM1480_SYS_PLL_DIV _SB_MAKE64(6)
+#define M_BCM1480_SYS_PLL_DIV _SB_MAKEMASK(5,S_BCM1480_SYS_PLL_DIV)
+#define V_BCM1480_SYS_PLL_DIV(x) _SB_MAKEVALUE(x,S_BCM1480_SYS_PLL_DIV)
+#define G_BCM1480_SYS_PLL_DIV(x) _SB_GETVALUE(x,S_BCM1480_SYS_PLL_DIV,M_BCM1480_SYS_PLL_DIV)
+
+#define S_BCM1480_SYS_SW_DIV _SB_MAKE64(11)
+#define M_BCM1480_SYS_SW_DIV _SB_MAKEMASK(5,S_BCM1480_SYS_SW_DIV)
+#define V_BCM1480_SYS_SW_DIV(x) _SB_MAKEVALUE(x,S_BCM1480_SYS_SW_DIV)
+#define G_BCM1480_SYS_SW_DIV(x) _SB_GETVALUE(x,S_BCM1480_SYS_SW_DIV,M_BCM1480_SYS_SW_DIV)
+
+#define M_BCM1480_SYS_PCMCIA_ENABLE _SB_MAKEMASK1(16)
+#define M_BCM1480_SYS_DUART1_ENABLE _SB_MAKEMASK1(17)
+
+#define S_BCM1480_SYS_BOOT_MODE _SB_MAKE64(18)
+#define M_BCM1480_SYS_BOOT_MODE _SB_MAKEMASK(2,S_BCM1480_SYS_BOOT_MODE)
+#define V_BCM1480_SYS_BOOT_MODE(x) _SB_MAKEVALUE(x,S_BCM1480_SYS_BOOT_MODE)
+#define G_BCM1480_SYS_BOOT_MODE(x) _SB_GETVALUE(x,S_BCM1480_SYS_BOOT_MODE,M_BCM1480_SYS_BOOT_MODE)
+#define K_BCM1480_SYS_BOOT_MODE_ROM32 0
+#define K_BCM1480_SYS_BOOT_MODE_ROM8 1
+#define K_BCM1480_SYS_BOOT_MODE_SMBUS_SMALL 2
+#define K_BCM1480_SYS_BOOT_MODE_SMBUS_BIG 3
+#define M_BCM1480_SYS_BOOT_MODE_SMBUS _SB_MAKEMASK1(19)
+
+#define M_BCM1480_SYS_PCI_HOST _SB_MAKEMASK1(20)
+#define M_BCM1480_SYS_PCI_ARBITER _SB_MAKEMASK1(21)
+#define M_BCM1480_SYS_BIG_ENDIAN _SB_MAKEMASK1(22)
+#define M_BCM1480_SYS_GENCLK_EN _SB_MAKEMASK1(23)
+#define M_BCM1480_SYS_GEN_PARITY_EN _SB_MAKEMASK1(24)
+#define M_BCM1480_SYS_RESERVED25 _SB_MAKEMASK1(25)
+
+#define S_BCM1480_SYS_CONFIG 26
+#define M_BCM1480_SYS_CONFIG _SB_MAKEMASK(6,S_BCM1480_SYS_CONFIG)
+#define V_BCM1480_SYS_CONFIG(x) _SB_MAKEVALUE(x,S_BCM1480_SYS_CONFIG)
+#define G_BCM1480_SYS_CONFIG(x) _SB_GETVALUE(x,S_BCM1480_SYS_CONFIG,M_BCM1480_SYS_CONFIG)
+
+#define M_BCM1480_SYS_RESERVED32 _SB_MAKEMASK(32,15)
+
+#define S_BCM1480_SYS_NODEID 47
+#define M_BCM1480_SYS_NODEID _SB_MAKEMASK(4,S_BCM1480_SYS_NODEID)
+#define V_BCM1480_SYS_NODEID(x) _SB_MAKEVALUE(x,S_BCM1480_SYS_NODEID)
+#define G_BCM1480_SYS_NODEID(x) _SB_GETVALUE(x,S_BCM1480_SYS_NODEID,M_BCM1480_SYS_NODEID)
+
+#define M_BCM1480_SYS_CCNUMA_EN _SB_MAKEMASK1(51)
+#define M_BCM1480_SYS_CPU_RESET_0 _SB_MAKEMASK1(52)
+#define M_BCM1480_SYS_CPU_RESET_1 _SB_MAKEMASK1(53)
+#define M_BCM1480_SYS_CPU_RESET_2 _SB_MAKEMASK1(54)
+#define M_BCM1480_SYS_CPU_RESET_3 _SB_MAKEMASK1(55)
+#define S_BCM1480_SYS_DISABLECPU0 56
+#define M_BCM1480_SYS_DISABLECPU0 _SB_MAKEMASK1(S_BCM1480_SYS_DISABLECPU0)
+#define S_BCM1480_SYS_DISABLECPU1 57
+#define M_BCM1480_SYS_DISABLECPU1 _SB_MAKEMASK1(S_BCM1480_SYS_DISABLECPU1)
+#define S_BCM1480_SYS_DISABLECPU2 58
+#define M_BCM1480_SYS_DISABLECPU2 _SB_MAKEMASK1(S_BCM1480_SYS_DISABLECPU2)
+#define S_BCM1480_SYS_DISABLECPU3 59
+#define M_BCM1480_SYS_DISABLECPU3 _SB_MAKEMASK1(S_BCM1480_SYS_DISABLECPU3)
+
+#define M_BCM1480_SYS_SB_SOFTRES _SB_MAKEMASK1(60)
+#define M_BCM1480_SYS_EXT_RESET _SB_MAKEMASK1(61)
+#define M_BCM1480_SYS_SYSTEM_RESET _SB_MAKEMASK1(62)
+#define M_BCM1480_SYS_SW_FLAG _SB_MAKEMASK1(63)
+
+/*
+ * Scratch Register (Table 16)
+ * Register: SCD_SYSTEM_SCRATCH
+ * Same as BCM1250
+ */
+
+
+/*
+ * Mailbox Registers (Table 17)
+ * Registers: SCD_MBOX_{0,1}_CPU_x
+ * Same as BCM1250
+ */
+
+
+/*
+ * See bcm1480_int.h for interrupt mapper registers.
+ */
+
+
+/*
+ * Watchdog Timer Initial Count Registers (Table 23)
+ * Registers: SCD_WDOG_INIT_CNT_x
+ *
+ * The watchdogs are almost the same as the 1250, except
+ * the configuration register has more bits to control the
+ * other CPUs.
+ */
+
+
+/*
+ * Watchdog Timer Configuration Registers (Table 25)
+ * Registers: SCD_WDOG_CFG_x
+ */
+
+#define M_BCM1480_SCD_WDOG_ENABLE _SB_MAKEMASK1(0)
+
+#define S_BCM1480_SCD_WDOG_RESET_TYPE 2
+#define M_BCM1480_SCD_WDOG_RESET_TYPE _SB_MAKEMASK(5,S_BCM1480_SCD_WDOG_RESET_TYPE)
+#define V_BCM1480_SCD_WDOG_RESET_TYPE(x) _SB_MAKEVALUE(x,S_BCM1480_SCD_WDOG_RESET_TYPE)
+#define G_BCM1480_SCD_WDOG_RESET_TYPE(x) _SB_GETVALUE(x,S_BCM1480_SCD_WDOG_RESET_TYPE,M_BCM1480_SCD_WDOG_RESET_TYPE)
+
+#define K_BCM1480_SCD_WDOG_RESET_FULL 0 /* actually, (x & 1) == 0 */
+#define K_BCM1480_SCD_WDOG_RESET_SOFT 1
+#define K_BCM1480_SCD_WDOG_RESET_CPU0 3
+#define K_BCM1480_SCD_WDOG_RESET_CPU1 5
+#define K_BCM1480_SCD_WDOG_RESET_CPU2 9
+#define K_BCM1480_SCD_WDOG_RESET_CPU3 17
+#define K_BCM1480_SCD_WDOG_RESET_ALL_CPUS 31
+
+
+#define M_BCM1480_SCD_WDOG_HAS_RESET _SB_MAKEMASK1(8)
+
+/*
+ * General Timer Initial Count Registers (Table 26)
+ * Registers: SCD_TIMER_INIT_x
+ *
+ * The timer registers are the same as the BCM1250
+ */
+
+
+/*
+ * ZBbus Count Register (Table 29)
+ * Register: ZBBUS_CYCLE_COUNT
+ *
+ * Same as BCM1250
+ */
+
+/*
+ * ZBbus Compare Registers (Table 30)
+ * Registers: ZBBUS_CYCLE_CPx
+ *
+ * Same as BCM1250
+ */
+
+
+/*
+ * System Performance Counter Configuration Register (Table 31)
+ * Register: PERF_CNT_CFG_0
+ *
+ * Since the clear/enable bits are moved compared to the
+ * 1250 and there are more fields, this register will be BCM1480 specific.
+ */
+
+#define S_BCM1480_SPC_CFG_SRC0 0
+#define M_BCM1480_SPC_CFG_SRC0 _SB_MAKEMASK(8,S_BCM1480_SPC_CFG_SRC0)
+#define V_BCM1480_SPC_CFG_SRC0(x) _SB_MAKEVALUE(x,S_BCM1480_SPC_CFG_SRC0)
+#define G_BCM1480_SPC_CFG_SRC0(x) _SB_GETVALUE(x,S_BCM1480_SPC_CFG_SRC0,M_BCM1480_SPC_CFG_SRC0)
+
+#define S_BCM1480_SPC_CFG_SRC1 8
+#define M_BCM1480_SPC_CFG_SRC1 _SB_MAKEMASK(8,S_BCM1480_SPC_CFG_SRC1)
+#define V_BCM1480_SPC_CFG_SRC1(x) _SB_MAKEVALUE(x,S_BCM1480_SPC_CFG_SRC1)
+#define G_BCM1480_SPC_CFG_SRC1(x) _SB_GETVALUE(x,S_BCM1480_SPC_CFG_SRC1,M_BCM1480_SPC_CFG_SRC1)
+
+#define S_BCM1480_SPC_CFG_SRC2 16
+#define M_BCM1480_SPC_CFG_SRC2 _SB_MAKEMASK(8,S_BCM1480_SPC_CFG_SRC2)
+#define V_BCM1480_SPC_CFG_SRC2(x) _SB_MAKEVALUE(x,S_BCM1480_SPC_CFG_SRC2)
+#define G_BCM1480_SPC_CFG_SRC2(x) _SB_GETVALUE(x,S_BCM1480_SPC_CFG_SRC2,M_BCM1480_SPC_CFG_SRC2)
+
+#define S_BCM1480_SPC_CFG_SRC3 24
+#define M_BCM1480_SPC_CFG_SRC3 _SB_MAKEMASK(8,S_BCM1480_SPC_CFG_SRC3)
+#define V_BCM1480_SPC_CFG_SRC3(x) _SB_MAKEVALUE(x,S_BCM1480_SPC_CFG_SRC3)
+#define G_BCM1480_SPC_CFG_SRC3(x) _SB_GETVALUE(x,S_BCM1480_SPC_CFG_SRC3,M_BCM1480_SPC_CFG_SRC3)
+
+#define S_BCM1480_SPC_CFG_SRC4 32
+#define M_BCM1480_SPC_CFG_SRC4 _SB_MAKEMASK(8,S_BCM1480_SPC_CFG_SRC4)
+#define V_BCM1480_SPC_CFG_SRC4(x) _SB_MAKEVALUE(x,S_BCM1480_SPC_CFG_SRC4)
+#define G_BCM1480_SPC_CFG_SRC4(x) _SB_GETVALUE(x,S_BCM1480_SPC_CFG_SRC4,M_BCM1480_SPC_CFG_SRC4)
+
+#define S_BCM1480_SPC_CFG_SRC5 40
+#define M_BCM1480_SPC_CFG_SRC5 _SB_MAKEMASK(8,S_BCM1480_SPC_CFG_SRC5)
+#define V_BCM1480_SPC_CFG_SRC5(x) _SB_MAKEVALUE(x,S_BCM1480_SPC_CFG_SRC5)
+#define G_BCM1480_SPC_CFG_SRC5(x) _SB_GETVALUE(x,S_BCM1480_SPC_CFG_SRC5,M_BCM1480_SPC_CFG_SRC5)
+
+#define S_BCM1480_SPC_CFG_SRC6 48
+#define M_BCM1480_SPC_CFG_SRC6 _SB_MAKEMASK(8,S_BCM1480_SPC_CFG_SRC6)
+#define V_BCM1480_SPC_CFG_SRC6(x) _SB_MAKEVALUE(x,S_BCM1480_SPC_CFG_SRC6)
+#define G_BCM1480_SPC_CFG_SRC6(x) _SB_GETVALUE(x,S_BCM1480_SPC_CFG_SRC6,M_BCM1480_SPC_CFG_SRC6)
+
+#define S_BCM1480_SPC_CFG_SRC7 56
+#define M_BCM1480_SPC_CFG_SRC7 _SB_MAKEMASK(8,S_BCM1480_SPC_CFG_SRC7)
+#define V_BCM1480_SPC_CFG_SRC7(x) _SB_MAKEVALUE(x,S_BCM1480_SPC_CFG_SRC7)
+#define G_BCM1480_SPC_CFG_SRC7(x) _SB_GETVALUE(x,S_BCM1480_SPC_CFG_SRC7,M_BCM1480_SPC_CFG_SRC7)
+
+/*
+ * System Performance Counter Control Register (Table 32)
+ * Register: PERF_CNT_CFG_1
+ * BCM1480 specific
+ */
+
+#define M_BCM1480_SPC_CFG_CLEAR _SB_MAKEMASK1(0)
+#define M_BCM1480_SPC_CFG_ENABLE _SB_MAKEMASK1(1)
+
+/*
+ * System Performance Counters (Table 33)
+ * Registers: PERF_CNT_x
+ */
+
+#define S_BCM1480_SPC_CNT_COUNT 0
+#define M_BCM1480_SPC_CNT_COUNT _SB_MAKEMASK(40,S_BCM1480_SPC_CNT_COUNT)
+#define V_BCM1480_SPC_CNT_COUNT(x) _SB_MAKEVALUE(x,S_BCM1480_SPC_CNT_COUNT)
+#define G_BCM1480_SPC_CNT_COUNT(x) _SB_GETVALUE(x,S_BCM1480_SPC_CNT_COUNT,M_BCM1480_SPC_CNT_COUNT)
+
+#define M_BCM1480_SPC_CNT_OFLOW _SB_MAKEMASK1(40)
+
+
+/*
+ * Bus Watcher Error Status Register (Tables 36, 37)
+ * Registers: BUS_ERR_STATUS, BUS_ERR_STATUS_DEBUG
+ * Same as BCM1250.
+ */
+
+/*
+ * Bus Watcher Error Data Registers (Table 38)
+ * Registers: BUS_ERR_DATA_x
+ * Same as BCM1250.
+ */
+
+/*
+ * Bus Watcher L2 ECC Counter Register (Table 39)
+ * Register: BUS_L2_ERRORS
+ * Same as BCM1250.
+ */
+
+
+/*
+ * Bus Watcher Memory and I/O Error Counter Register (Table 40)
+ * Register: BUS_MEM_IO_ERRORS
+ * Same as BCM1250.
+ */
+
+
+/*
+ * Address Trap Registers
+ *
+ * Register layout same as BCM1250, almost. The bus agents
+ * are different, and the address trap configuration bits are
+ * slightly different.
+ */
+
+#define M_BCM1480_ATRAP_INDEX _SB_MAKEMASK(4,0)
+#define M_BCM1480_ATRAP_ADDRESS _SB_MAKEMASK(40,0)
+
+#define S_BCM1480_ATRAP_CFG_CNT 0
+#define M_BCM1480_ATRAP_CFG_CNT _SB_MAKEMASK(3,S_BCM1480_ATRAP_CFG_CNT)
+#define V_BCM1480_ATRAP_CFG_CNT(x) _SB_MAKEVALUE(x,S_BCM1480_ATRAP_CFG_CNT)
+#define G_BCM1480_ATRAP_CFG_CNT(x) _SB_GETVALUE(x,S_BCM1480_ATRAP_CFG_CNT,M_BCM1480_ATRAP_CFG_CNT)
+
+#define M_BCM1480_ATRAP_CFG_WRITE _SB_MAKEMASK1(3)
+#define M_BCM1480_ATRAP_CFG_ALL _SB_MAKEMASK1(4)
+#define M_BCM1480_ATRAP_CFG_INV _SB_MAKEMASK1(5)
+#define M_BCM1480_ATRAP_CFG_USESRC _SB_MAKEMASK1(6)
+#define M_BCM1480_ATRAP_CFG_SRCINV _SB_MAKEMASK1(7)
+
+#define S_BCM1480_ATRAP_CFG_AGENTID 8
+#define M_BCM1480_ATRAP_CFG_AGENTID _SB_MAKEMASK(4,S_BCM1480_ATRAP_CFG_AGENTID)
+#define V_BCM1480_ATRAP_CFG_AGENTID(x) _SB_MAKEVALUE(x,S_BCM1480_ATRAP_CFG_AGENTID)
+#define G_BCM1480_ATRAP_CFG_AGENTID(x) _SB_GETVALUE(x,S_BCM1480_ATRAP_CFG_AGENTID,M_BCM1480_ATRAP_CFG_AGENTID)
+
+
+#define K_BCM1480_BUS_AGENT_CPU0 0
+#define K_BCM1480_BUS_AGENT_CPU1 1
+#define K_BCM1480_BUS_AGENT_NC 2
+#define K_BCM1480_BUS_AGENT_IOB 3
+#define K_BCM1480_BUS_AGENT_SCD 4
+#define K_BCM1480_BUS_AGENT_L2C 6
+#define K_BCM1480_BUS_AGENT_MC 7
+#define K_BCM1480_BUS_AGENT_CPU2 8
+#define K_BCM1480_BUS_AGENT_CPU3 9
+#define K_BCM1480_BUS_AGENT_PM 10
+
+#define S_BCM1480_ATRAP_CFG_CATTR 12
+#define M_BCM1480_ATRAP_CFG_CATTR _SB_MAKEMASK(2,S_BCM1480_ATRAP_CFG_CATTR)
+#define V_BCM1480_ATRAP_CFG_CATTR(x) _SB_MAKEVALUE(x,S_BCM1480_ATRAP_CFG_CATTR)
+#define G_BCM1480_ATRAP_CFG_CATTR(x) _SB_GETVALUE(x,S_BCM1480_ATRAP_CFG_CATTR,M_BCM1480_ATRAP_CFG_CATTR)
+
+#define K_BCM1480_ATRAP_CFG_CATTR_IGNORE 0
+#define K_BCM1480_ATRAP_CFG_CATTR_UNC 1
+#define K_BCM1480_ATRAP_CFG_CATTR_NONCOH 2
+#define K_BCM1480_ATRAP_CFG_CATTR_COHERENT 3
+
+#define M_BCM1480_ATRAP_CFG_CATTRINV _SB_MAKEMASK1(14)
+
+
+/*
+ * Trace Event Registers (Table 47)
+ * Same as BCM1250.
+ */
+
+/*
+ * Trace Sequence Control Registers (Table 48)
+ * Registers: TRACE_SEQUENCE_x
+ *
+ * Same as BCM1250 except for two new fields.
+ */
+
+
+#define M_BCM1480_SCD_TRSEQ_TID_MATCH_EN _SB_MAKEMASK1(25)
+
+#define S_BCM1480_SCD_TRSEQ_SWFUNC 26
+#define M_BCM1480_SCD_TRSEQ_SWFUNC _SB_MAKEMASK(2,S_BCM1480_SCD_TRSEQ_SWFUNC)
+#define V_BCM1480_SCD_TRSEQ_SWFUNC(x) _SB_MAKEVALUE(x,S_BCM1480_SCD_TRSEQ_SWFUNC)
+#define G_BCM1480_SCD_TRSEQ_SWFUNC(x) _SB_GETVALUE(x,S_BCM1480_SCD_TRSEQ_SWFUNC,M_BCM1480_SCD_TRSEQ_SWFUNC)
+
+/*
+ * Trace Control Register (Table 49)
+ * Register: TRACE_CFG
+ *
+ * Bits 0..8 are the same as the BCM1250, rest are different.
+ * Entire register is redefined below.
+ */
+
+#define M_BCM1480_SCD_TRACE_CFG_RESET _SB_MAKEMASK1(0)
+#define M_BCM1480_SCD_TRACE_CFG_START_READ _SB_MAKEMASK1(1)
+#define M_BCM1480_SCD_TRACE_CFG_START _SB_MAKEMASK1(2)
+#define M_BCM1480_SCD_TRACE_CFG_STOP _SB_MAKEMASK1(3)
+#define M_BCM1480_SCD_TRACE_CFG_FREEZE _SB_MAKEMASK1(4)
+#define M_BCM1480_SCD_TRACE_CFG_FREEZE_FULL _SB_MAKEMASK1(5)
+#define M_BCM1480_SCD_TRACE_CFG_DEBUG_FULL _SB_MAKEMASK1(6)
+#define M_BCM1480_SCD_TRACE_CFG_FULL _SB_MAKEMASK1(7)
+#define M_BCM1480_SCD_TRACE_CFG_FORCE_CNT _SB_MAKEMASK1(8)
+
+#define S_BCM1480_SCD_TRACE_CFG_MODE 16
+#define M_BCM1480_SCD_TRACE_CFG_MODE _SB_MAKEMASK(2,S_BCM1480_SCD_TRACE_CFG_MODE)
+#define V_BCM1480_SCD_TRACE_CFG_MODE(x) _SB_MAKEVALUE(x,S_BCM1480_SCD_TRACE_CFG_MODE)
+#define G_BCM1480_SCD_TRACE_CFG_MODE(x) _SB_GETVALUE(x,S_BCM1480_SCD_TRACE_CFG_MODE,M_BCM1480_SCD_TRACE_CFG_MODE)
+
+#define K_BCM1480_SCD_TRACE_CFG_MODE_BLOCKERS 0
+#define K_BCM1480_SCD_TRACE_CFG_MODE_BYTEEN_INT 1
+#define K_BCM1480_SCD_TRACE_CFG_MODE_FLOW_ID 2
+
+#define S_BCM1480_SCD_TRACE_CFG_CUR_ADDR 24
+#define M_BCM1480_SCD_TRACE_CFG_CUR_ADDR _SB_MAKEMASK(8,S_BCM1480_SCD_TRACE_CFG_CUR_ADDR)
+#define V_BCM1480_SCD_TRACE_CFG_CUR_ADDR(x) _SB_MAKEVALUE(x,S_BCM1480_SCD_TRACE_CFG_CUR_ADDR)
+#define G_BCM1480_SCD_TRACE_CFG_CUR_ADDR(x) _SB_GETVALUE(x,S_BCM1480_SCD_TRACE_CFG_CUR_ADDR,M_BCM1480_SCD_TRACE_CFG_CUR_ADDR)
+
+#endif /* _BCM1480_SCD_H */
Index: lmo/include/asm-mips/sibyte/sb1250_defs.h
===================================================================
--- lmo.orig/include/asm-mips/sibyte/sb1250_defs.h 2005-10-19 22:34:08.000000000 -0700
+++ lmo/include/asm-mips/sibyte/sb1250_defs.h 2005-10-19 22:34:11.000000000 -0700
@@ -97,13 +97,17 @@
* ordering, so be careful when adding support for new minor revs.
********************************************************************* */
-#define SIBYTE_HDR_FMASK_1250_ALL 0x00000ff
-#define SIBYTE_HDR_FMASK_1250_PASS1 0x0000001
-#define SIBYTE_HDR_FMASK_1250_PASS2 0x0000002
-#define SIBYTE_HDR_FMASK_1250_PASS3 0x0000004
-
-#define SIBYTE_HDR_FMASK_112x_ALL 0x0000f00
-#define SIBYTE_HDR_FMASK_112x_PASS1 0x0000100
+#define SIBYTE_HDR_FMASK_1250_ALL 0x000000ff
+#define SIBYTE_HDR_FMASK_1250_PASS1 0x00000001
+#define SIBYTE_HDR_FMASK_1250_PASS2 0x00000002
+#define SIBYTE_HDR_FMASK_1250_PASS3 0x00000004
+
+#define SIBYTE_HDR_FMASK_112x_ALL 0x00000f00
+#define SIBYTE_HDR_FMASK_112x_PASS1 0x00000100
+
+#define SIBYTE_HDR_FMASK_1480_ALL 0x0000f000
+#define SIBYTE_HDR_FMASK_1480_PASS1 0x00001000
+#define SIBYTE_HDR_FMASK_1480_PASS2 0x00002000
/* Bit mask for chip/revision. (use _ALL for all revisions of a chip). */
#define SIBYTE_HDR_FMASK(chip, pass) \
@@ -111,8 +115,17 @@
#define SIBYTE_HDR_FMASK_ALLREVS(chip) \
(SIBYTE_HDR_FMASK_ ## chip ## _ALL)
+/* Default constant value for all chips, all revisions */
#define SIBYTE_HDR_FMASK_ALL \
+ (SIBYTE_HDR_FMASK_1250_ALL | SIBYTE_HDR_FMASK_112x_ALL \
+ | SIBYTE_HDR_FMASK_1480_ALL)
+
+/* This one is used for the "original" BCM1250/BCM112x chips. We use this
+ to weed out constants and macros that do not exist on later chips like
+ the BCM1480 */
+#define SIBYTE_HDR_FMASK_1250_112x_ALL \
(SIBYTE_HDR_FMASK_1250_ALL | SIBYTE_HDR_FMASK_112x_ALL)
+#define SIBYTE_HDR_FMASK_1250_112x SIBYTE_HDR_FMASK_1250_112x_ALL
#ifndef SIBYTE_HDR_FEATURES
#define SIBYTE_HDR_FEATURES SIBYTE_HDR_FMASK_ALL
@@ -133,6 +146,12 @@
#define SIBYTE_HDR_FEATURE_CHIP(chip) \
(!! (SIBYTE_HDR_FMASK_ALLREVS(chip) & SIBYTE_HDR_FEATURES))
+/* True for all versions of the BCM1250 and BCM1125, but not true for
+ anything else */
+#define SIBYTE_HDR_FEATURE_1250_112x \
+ (SIBYTE_HDR_FEATURE_CHIP(1250) || SIBYTE_HDR_FEATURE_CHIP(112x))
+/* (!! (SIBYTE_HDR_FEATURES & SIBYHTE_HDR_FMASK_1250_112x)) */
+
/* True if header features enabled for that rev or later, inclusive. */
#define SIBYTE_HDR_FEATURE(chip, pass) \
(!! ((SIBYTE_HDR_FMASK(chip, pass) \
Index: lmo/include/asm-mips/sibyte/sb1250_dma.h
===================================================================
--- lmo.orig/include/asm-mips/sibyte/sb1250_dma.h 2005-10-19 22:34:08.000000000 -0700
+++ lmo/include/asm-mips/sibyte/sb1250_dma.h 2005-10-19 22:34:11.000000000 -0700
@@ -58,17 +58,17 @@
#define M_DMA_RESERVED1 _SB_MAKEMASK1(2)
#define S_DMA_DESC_TYPE _SB_MAKE64(1)
-#define M_DMA_DESC_TYPE _SB_MAKE64(2,S_DMA_DESC_TYPE)
+#define M_DMA_DESC_TYPE _SB_MAKEMASK(2,S_DMA_DESC_TYPE)
#define V_DMA_DESC_TYPE(x) _SB_MAKEVALUE(x,S_DMA_DESC_TYPE)
#define G_DMA_DESC_TYPE(x) _SB_GETVALUE(x,S_DMA_DESC_TYPE,M_DMA_DESC_TYPE)
#define K_DMA_DESC_TYPE_RING_AL 0
#define K_DMA_DESC_TYPE_CHAIN_AL 1
-#if SIBYTE_HDR_FEATURE(1250, PASS3) || SIBYTE_HDR_FEATURE(112x, PASS1)
+#if SIBYTE_HDR_FEATURE(1250, PASS3) || SIBYTE_HDR_FEATURE(112x, PASS1) || SIBYTE_HDR_FEATURE_CHIP(1480)
#define K_DMA_DESC_TYPE_RING_UAL_WI 2
#define K_DMA_DESC_TYPE_RING_UAL_RMW 3
-#endif /* 1250 PASS3 || 112x PASS1 */
+#endif /* 1250 PASS3 || 112x PASS1 || 1480 */
#define M_DMA_EOP_INT_EN _SB_MAKEMASK1(3)
#define M_DMA_HWM_INT_EN _SB_MAKEMASK1(4)
@@ -111,11 +111,11 @@
#define M_DMA_NO_DSCR_UPDT _SB_MAKEMASK1(4)
#define M_DMA_L2CA _SB_MAKEMASK1(5)
-#if SIBYTE_HDR_FEATURE(1250, PASS3) || SIBYTE_HDR_FEATURE(112x, PASS1)
+#if SIBYTE_HDR_FEATURE(1250, PASS3) || SIBYTE_HDR_FEATURE(112x, PASS1) || SIBYTE_HDR_FEATURE_CHIP(1480)
#define M_DMA_RX_XTRA_STATUS _SB_MAKEMASK1(6)
#define M_DMA_TX_CPU_PAUSE _SB_MAKEMASK1(6)
#define M_DMA_TX_FC_PAUSE_EN _SB_MAKEMASK1(7)
-#endif /* 1250 PASS3 || 112x PASS1 */
+#endif /* 1250 PASS3 || 112x PASS1 || 1480 */
#define M_DMA_MBZ1 _SB_MAKEMASK(6,15)
@@ -165,14 +165,14 @@
#define S_DMA_CURDSCR_COUNT _SB_MAKE64(40)
#define M_DMA_CURDSCR_COUNT _SB_MAKEMASK(16,S_DMA_CURDSCR_COUNT)
-#if SIBYTE_HDR_FEATURE(1250, PASS3) || SIBYTE_HDR_FEATURE(112x, PASS1)
+#if SIBYTE_HDR_FEATURE(1250, PASS3) || SIBYTE_HDR_FEATURE(112x, PASS1) || SIBYTE_HDR_FEATURE_CHIP(1480)
#define M_DMA_TX_CH_PAUSE_ON _SB_MAKEMASK1(56)
-#endif /* 1250 PASS3 || 112x PASS1 */
+#endif /* 1250 PASS3 || 112x PASS1 || 1480 */
/*
* Receive Packet Drop Registers
*/
-#if SIBYTE_HDR_FEATURE(1250, PASS3) || SIBYTE_HDR_FEATURE(112x, PASS1)
+#if SIBYTE_HDR_FEATURE(1250, PASS3) || SIBYTE_HDR_FEATURE(112x, PASS1) || SIBYTE_HDR_FEATURE_CHIP(1480)
#define S_DMA_OODLOST_RX _SB_MAKE64(0)
#define M_DMA_OODLOST_RX _SB_MAKEMASK(16,S_DMA_OODLOST_RX)
#define G_DMA_OODLOST_RX(x) _SB_GETVALUE(x,S_DMA_OODLOST_RX,M_DMA_OODLOST_RX)
@@ -180,7 +180,7 @@
#define S_DMA_EOP_COUNT_RX _SB_MAKE64(16)
#define M_DMA_EOP_COUNT_RX _SB_MAKEMASK(8,S_DMA_EOP_COUNT_RX)
#define G_DMA_EOP_COUNT_RX(x) _SB_GETVALUE(x,S_DMA_EOP_COUNT_RX,M_DMA_EOP_COUNT_RX)
-#endif /* 1250 PASS3 || 112x PASS1 */
+#endif /* 1250 PASS3 || 112x PASS1 || 1480 */
/* *********************************************************************
* DMA Descriptors
@@ -201,21 +201,21 @@
#define M_DMA_DSCRA_A_ADDR_OFFSET (M_DMA_DSCRA_OFFSET | M_DMA_DSCRA_A_ADDR)
-#if SIBYTE_HDR_FEATURE(1250, PASS3) || SIBYTE_HDR_FEATURE(112x, PASS1)
+#if SIBYTE_HDR_FEATURE(1250, PASS3) || SIBYTE_HDR_FEATURE(112x, PASS1) || SIBYTE_HDR_FEATURE_CHIP(1480)
#define S_DMA_DSCRA_A_ADDR_UA _SB_MAKE64(0)
#define M_DMA_DSCRA_A_ADDR_UA _SB_MAKEMASK(40,S_DMA_DSCRA_A_ADDR_UA)
-#endif /* 1250 PASS3 || 112x PASS1 */
+#endif /* 1250 PASS3 || 112x PASS1 || 1480 */
#define S_DMA_DSCRA_A_SIZE _SB_MAKE64(40)
#define M_DMA_DSCRA_A_SIZE _SB_MAKEMASK(9,S_DMA_DSCRA_A_SIZE)
#define V_DMA_DSCRA_A_SIZE(x) _SB_MAKEVALUE(x,S_DMA_DSCRA_A_SIZE)
#define G_DMA_DSCRA_A_SIZE(x) _SB_GETVALUE(x,S_DMA_DSCRA_A_SIZE,M_DMA_DSCRA_A_SIZE)
-#if SIBYTE_HDR_FEATURE(1250, PASS3) || SIBYTE_HDR_FEATURE(112x, PASS1)
+#if SIBYTE_HDR_FEATURE(1250, PASS3) || SIBYTE_HDR_FEATURE(112x, PASS1) || SIBYTE_HDR_FEATURE_CHIP(1480)
#define S_DMA_DSCRA_DSCR_CNT _SB_MAKE64(40)
#define M_DMA_DSCRA_DSCR_CNT _SB_MAKEMASK(8,S_DMA_DSCRA_DSCR_CNT)
#define G_DMA_DSCRA_DSCR_CNT(x) _SB_GETVALUE(x,S_DMA_DSCRA_DSCR_CNT,M_DMA_DSCRA_DSCR_CNT)
-#endif /* 1250 PASS3 || 112x PASS1 */
+#endif /* 1250 PASS3 || 112x PASS1 || 1480 */
#define M_DMA_DSCRA_INTERRUPT _SB_MAKEMASK1(49)
#define M_DMA_DSCRA_OFFSETB _SB_MAKEMASK1(50)
@@ -235,12 +235,12 @@
#define V_DMA_DSCRB_OPTIONS(x) _SB_MAKEVALUE(x,S_DMA_DSCRB_OPTIONS)
#define G_DMA_DSCRB_OPTIONS(x) _SB_GETVALUE(x,S_DMA_DSCRB_OPTIONS,M_DMA_DSCRB_OPTIONS)
-#if SIBYTE_HDR_FEATURE(1250, PASS3) || SIBYTE_HDR_FEATURE(112x, PASS1)
+#if SIBYTE_HDR_FEATURE(1250, PASS3) || SIBYTE_HDR_FEATURE(112x, PASS1) || SIBYTE_HDR_FEATURE_CHIP(1480)
#define S_DMA_DSCRB_A_SIZE _SB_MAKE64(8)
#define M_DMA_DSCRB_A_SIZE _SB_MAKEMASK(14,S_DMA_DSCRB_A_SIZE)
#define V_DMA_DSCRB_A_SIZE(x) _SB_MAKEVALUE(x,S_DMA_DSCRB_A_SIZE)
#define G_DMA_DSCRB_A_SIZE(x) _SB_GETVALUE(x,S_DMA_DSCRB_A_SIZE,M_DMA_DSCRB_A_SIZE)
-#endif /* 1250 PASS3 || 112x PASS1 */
+#endif /* 1250 PASS3 || 112x PASS1 || 1480 */
#define R_DMA_DSCRB_ADDR _SB_MAKE64(0x10)
@@ -255,12 +255,12 @@
#define M_DMA_DSCRB_B_VALID _SB_MAKEMASK1(49)
-#if SIBYTE_HDR_FEATURE(1250, PASS3) || SIBYTE_HDR_FEATURE(112x, PASS1)
+#if SIBYTE_HDR_FEATURE(1250, PASS3) || SIBYTE_HDR_FEATURE(112x, PASS1) || SIBYTE_HDR_FEATURE_CHIP(1480)
#define S_DMA_DSCRB_PKT_SIZE_MSB _SB_MAKE64(48)
#define M_DMA_DSCRB_PKT_SIZE_MSB _SB_MAKEMASK(2,S_DMA_DSCRB_PKT_SIZE_MSB)
#define V_DMA_DSCRB_PKT_SIZE_MSB(x) _SB_MAKEVALUE(x,S_DMA_DSCRB_PKT_SIZE_MSB)
#define G_DMA_DSCRB_PKT_SIZE_MSB(x) _SB_GETVALUE(x,S_DMA_DSCRB_PKT_SIZE_MSB,M_DMA_DSCRB_PKT_SIZE_MSB)
-#endif /* 1250 PASS3 || 112x PASS1 */
+#endif /* 1250 PASS3 || 112x PASS1 || 1480 */
#define S_DMA_DSCRB_PKT_SIZE _SB_MAKE64(50)
#define M_DMA_DSCRB_PKT_SIZE _SB_MAKEMASK(14,S_DMA_DSCRB_PKT_SIZE)
@@ -282,15 +282,16 @@
#define M_DMA_ETHRX_BADIP4CS _SB_MAKEMASK1(51)
#define M_DMA_ETHRX_DSCRERR _SB_MAKEMASK1(52)
-#if SIBYTE_HDR_FEATURE(1250, PASS2) || SIBYTE_HDR_FEATURE(112x, PASS1)
-/* Note: BADTCPCS is actually in DSCR_B options field */
+#if SIBYTE_HDR_FEATURE(1250, PASS2) || SIBYTE_HDR_FEATURE(112x, PASS1) || SIBYTE_HDR_FEATURE_CHIP(1480)
+/* Note: This bit is in the DSCR_B options field */
#define M_DMA_ETHRX_BADTCPCS _SB_MAKEMASK1(0)
-#endif /* 1250 PASS2 || 112x PASS1 */
+#endif /* 1250 PASS2 || 112x PASS1 || 1480 */
-#if SIBYTE_HDR_FEATURE(1250, PASS3) || SIBYTE_HDR_FEATURE(112x, PASS1)
+#if SIBYTE_HDR_FEATURE(1250, PASS3) || SIBYTE_HDR_FEATURE(112x, PASS1) || SIBYTE_HDR_FEATURE_CHIP(1480)
+/* Note: These bits are in the DSCR_B options field */
#define M_DMA_ETH_VLAN_FLAG _SB_MAKEMASK1(1)
#define M_DMA_ETH_CRC_FLAG _SB_MAKEMASK1(2)
-#endif /* 1250 PASS3 || 112x PASS1 */
+#endif /* 1250 PASS3 || 112x PASS1 || 1480 */
#define S_DMA_ETHRX_RXCH 53
#define M_DMA_ETHRX_RXCH _SB_MAKEMASK(2,S_DMA_ETHRX_RXCH)
@@ -438,7 +439,7 @@
M_DM_CUR_DSCR_DSCR_COUNT)
-#if SIBYTE_HDR_FEATURE(1250, PASS3) || SIBYTE_HDR_FEATURE(112x, PASS1)
+#if SIBYTE_HDR_FEATURE(1250, PASS3) || SIBYTE_HDR_FEATURE(112x, PASS1) || SIBYTE_HDR_FEATURE_CHIP(1480)
/*
* Data Mover Channel Partial Result Registers
* Register: DM_PARTIAL_0
@@ -459,10 +460,10 @@
M_DM_PARTIAL_TCPCS_PARTIAL)
#define M_DM_PARTIAL_ODD_BYTE _SB_MAKEMASK1(48)
-#endif /* 1250 PASS3 || 112x PASS1 */
+#endif /* 1250 PASS3 || 112x PASS1 || 1480 */
-#if SIBYTE_HDR_FEATURE(1250, PASS3) || SIBYTE_HDR_FEATURE(112x, PASS1)
+#if SIBYTE_HDR_FEATURE(1250, PASS3) || SIBYTE_HDR_FEATURE(112x, PASS1) || SIBYTE_HDR_FEATURE_CHIP(1480)
/*
* Data Mover CRC Definition Registers
* Register: CRC_DEF_0
@@ -479,10 +480,10 @@
#define V_CRC_DEF_CRC_POLY(r) _SB_MAKEVALUE(r,S_CRC_DEF_CRC_POLY)
#define G_CRC_DEF_CRC_POLY(r) _SB_GETVALUE(r,S_CRC_DEF_CRC_POLY,\
M_CRC_DEF_CRC_POLY)
-#endif /* 1250 PASS3 || 112x PASS1 */
+#endif /* 1250 PASS3 || 112x PASS1 || 1480 */
-#if SIBYTE_HDR_FEATURE(1250, PASS3) || SIBYTE_HDR_FEATURE(112x, PASS1)
+#if SIBYTE_HDR_FEATURE(1250, PASS3) || SIBYTE_HDR_FEATURE(112x, PASS1) || SIBYTE_HDR_FEATURE_CHIP(1480)
/*
* Data Mover CRC/Checksum Definition Registers
* Register: CTCP_DEF_0
@@ -511,7 +512,7 @@
#define K_CTCP_DEF_CRC_WIDTH_1 2
#define M_CTCP_DEF_CRC_BIT_ORDER _SB_MAKEMASK1(50)
-#endif /* 1250 PASS3 || 112x PASS1 */
+#endif /* 1250 PASS3 || 112x PASS1 || 1480 */
/*
@@ -560,12 +561,12 @@
#define M_DM_DSCRA_L2C_DEST _SB_MAKEMASK1(50)
#define M_DM_DSCRA_L2C_SRC _SB_MAKEMASK1(51)
-#if SIBYTE_HDR_FEATURE(1250, PASS2) || SIBYTE_HDR_FEATURE(112x, PASS1)
+#if SIBYTE_HDR_FEATURE(1250, PASS2) || SIBYTE_HDR_FEATURE(112x, PASS1) || SIBYTE_HDR_FEATURE_CHIP(1480)
#define M_DM_DSCRA_RD_BKOFF _SB_MAKEMASK1(52)
#define M_DM_DSCRA_WR_BKOFF _SB_MAKEMASK1(53)
-#endif /* 1250 PASS2 || 112x PASS1 */
+#endif /* 1250 PASS2 || 112x PASS1 || 1480 */
-#if SIBYTE_HDR_FEATURE(1250, PASS3) || SIBYTE_HDR_FEATURE(112x, PASS1)
+#if SIBYTE_HDR_FEATURE(1250, PASS3) || SIBYTE_HDR_FEATURE(112x, PASS1) || SIBYTE_HDR_FEATURE_CHIP(1480)
#define M_DM_DSCRA_TCPCS_EN _SB_MAKEMASK1(54)
#define M_DM_DSCRA_TCPCS_RES _SB_MAKEMASK1(55)
#define M_DM_DSCRA_TCPCS_AP _SB_MAKEMASK1(56)
@@ -574,7 +575,7 @@
#define M_DM_DSCRA_CRC_AP _SB_MAKEMASK1(59)
#define M_DM_DSCRA_CRC_DFN _SB_MAKEMASK1(60)
#define M_DM_DSCRA_CRC_XBIT _SB_MAKEMASK1(61)
-#endif /* 1250 PASS3 || 112x PASS1 */
+#endif /* 1250 PASS3 || 112x PASS1 || 1480 */
#define M_DM_DSCRA_RESERVED2 _SB_MAKEMASK(3,61)
Index: lmo/include/asm-mips/sibyte/sb1250_genbus.h
===================================================================
--- lmo.orig/include/asm-mips/sibyte/sb1250_genbus.h 2005-10-19 22:34:08.000000000 -0700
+++ lmo/include/asm-mips/sibyte/sb1250_genbus.h 2005-10-19 22:34:11.000000000 -0700
@@ -51,19 +51,21 @@
#define M_IO_WIDTH_SEL _SB_MAKEMASK(2,S_IO_WIDTH_SEL)
#define K_IO_WIDTH_SEL_1 0
#define K_IO_WIDTH_SEL_2 1
-#if SIBYTE_HDR_FEATURE(1250, PASS2) || SIBYTE_HDR_FEATURE(112x, PASS1)
+#if SIBYTE_HDR_FEATURE(1250, PASS2) || SIBYTE_HDR_FEATURE(112x, PASS1) \
+ || SIBYTE_HDR_FEATURE_CHIP(1480)
#define K_IO_WIDTH_SEL_1L 2
-#endif /* 1250 PASS2 || 112x PASS1 */
+#endif /* 1250 PASS2 || 112x PASS1 || 1480 */
#define K_IO_WIDTH_SEL_4 3
#define V_IO_WIDTH_SEL(x) _SB_MAKEVALUE(x,S_IO_WIDTH_SEL)
#define G_IO_WIDTH_SEL(x) _SB_GETVALUE(x,S_IO_WIDTH_SEL,M_IO_WIDTH_SEL)
#define S_IO_PARITY_ENA 4
#define M_IO_PARITY_ENA _SB_MAKEMASK1(S_IO_PARITY_ENA)
-#if SIBYTE_HDR_FEATURE(1250, PASS2) || SIBYTE_HDR_FEATURE(112x, PASS1)
+#if SIBYTE_HDR_FEATURE(1250, PASS2) || SIBYTE_HDR_FEATURE(112x, PASS1) \
+ || SIBYTE_HDR_FEATURE_CHIP(1480)
#define S_IO_BURST_EN 5
#define M_IO_BURST_EN _SB_MAKEMASK1(S_IO_BURST_EN)
-#endif /* 1250 PASS2 || 112x PASS1 */
+#endif /* 1250 PASS2 || 112x PASS1 || 1480 */
#define S_IO_PARITY_ODD 6
#define M_IO_PARITY_ODD _SB_MAKEMASK1(S_IO_PARITY_ODD)
#define S_IO_NONMUX 7
@@ -96,8 +98,11 @@
#define S_IO_ADDRBASE 16 /* # bits to shift addr for this reg */
+#define M_IO_BLK_CACHE _SB_MAKEMASK1(15)
+
+
/*
- * Generic Bus Region 0 Timing Registers (Table 11-7)
+ * Generic Bus Timing 0 Registers (Table 11-7)
*/
#define S_IO_ALE_WIDTH 0
@@ -105,21 +110,23 @@
#define V_IO_ALE_WIDTH(x) _SB_MAKEVALUE(x,S_IO_ALE_WIDTH)
#define G_IO_ALE_WIDTH(x) _SB_GETVALUE(x,S_IO_ALE_WIDTH,M_IO_ALE_WIDTH)
-#if SIBYTE_HDR_FEATURE(1250, PASS2) || SIBYTE_HDR_FEATURE(112x, PASS1)
+#if SIBYTE_HDR_FEATURE(1250, PASS2) || SIBYTE_HDR_FEATURE(112x, PASS1) \
+ || SIBYTE_HDR_FEATURE_CHIP(1480)
#define M_IO_EARLY_CS _SB_MAKEMASK1(3)
-#endif /* 1250 PASS2 || 112x PASS1 */
+#endif /* 1250 PASS2 || 112x PASS1 || 1480 */
#define S_IO_ALE_TO_CS 4
#define M_IO_ALE_TO_CS _SB_MAKEMASK(2,S_IO_ALE_TO_CS)
#define V_IO_ALE_TO_CS(x) _SB_MAKEVALUE(x,S_IO_ALE_TO_CS)
#define G_IO_ALE_TO_CS(x) _SB_GETVALUE(x,S_IO_ALE_TO_CS,M_IO_ALE_TO_CS)
-#if SIBYTE_HDR_FEATURE(1250, PASS2) || SIBYTE_HDR_FEATURE(112x, PASS1)
+#if SIBYTE_HDR_FEATURE(1250, PASS2) || SIBYTE_HDR_FEATURE(112x, PASS1) \
+ || SIBYTE_HDR_FEATURE_CHIP(1480)
#define S_IO_BURST_WIDTH _SB_MAKE64(6)
#define M_IO_BURST_WIDTH _SB_MAKEMASK(2,S_IO_BURST_WIDTH)
#define V_IO_BURST_WIDTH(x) _SB_MAKEVALUE(x,S_IO_BURST_WIDTH)
#define G_IO_BURST_WIDTH(x) _SB_GETVALUE(x,S_IO_BURST_WIDTH,M_IO_BURST_WIDTH)
-#endif /* 1250 PASS2 || 112x PASS1 */
+#endif /* 1250 PASS2 || 112x PASS1 || 1480 */
#define S_IO_CS_WIDTH 8
#define M_IO_CS_WIDTH _SB_MAKEMASK(5,S_IO_CS_WIDTH)
@@ -141,9 +148,10 @@
#define V_IO_ALE_TO_WRITE(x) _SB_MAKEVALUE(x,S_IO_ALE_TO_WRITE)
#define G_IO_ALE_TO_WRITE(x) _SB_GETVALUE(x,S_IO_ALE_TO_WRITE,M_IO_ALE_TO_WRITE)
-#if SIBYTE_HDR_FEATURE(1250, PASS2) || SIBYTE_HDR_FEATURE(112x, PASS1)
+#if SIBYTE_HDR_FEATURE(1250, PASS2) || SIBYTE_HDR_FEATURE(112x, PASS1) \
+ || SIBYTE_HDR_FEATURE_CHIP(1480)
#define M_IO_RDY_SYNC _SB_MAKEMASK1(3)
-#endif /* 1250 PASS2 || 112x PASS1 */
+#endif /* 1250 PASS2 || 112x PASS1 || 1480 */
#define S_IO_WRITE_WIDTH 4
#define M_IO_WRITE_WIDTH _SB_MAKEMASK(4,S_IO_WRITE_WIDTH)
@@ -183,9 +191,127 @@
#define M_IO_TIMEOUT_INT _SB_MAKEMASK1(10)
#define M_IO_ILL_ADDR_INT _SB_MAKEMASK1(11)
#define M_IO_MULT_CS_INT _SB_MAKEMASK1(12)
-#if SIBYTE_HDR_FEATURE(1250, PASS2) || SIBYTE_HDR_FEATURE(112x, PASS1)
+#if SIBYTE_HDR_FEATURE(1250, PASS2) || SIBYTE_HDR_FEATURE(112x, PASS1) || SIBYTE_HDR_FEATURE_CHIP(1480)
#define M_IO_COH_ERR _SB_MAKEMASK1(14)
-#endif /* 1250 PASS2 || 112x PASS1 */
+#endif /* 1250 PASS2 || 112x PASS1 || 1480 */
+
+
+/*
+ * Generic Bus Output Drive Control Register 0 (Table 14-18)
+ */
+
+#define S_IO_SLEW0 0
+#define M_IO_SLEW0 _SB_MAKEMASK(2,S_IO_SLEW0)
+#define V_IO_SLEW0(x) _SB_MAKEVALUE(x,S_IO_SLEW0)
+#define G_IO_SLEW0(x) _SB_GETVALUE(x,S_IO_SLEW0,M_IO_SLEW0)
+
+#define S_IO_DRV_A 2
+#define M_IO_DRV_A _SB_MAKEMASK(2,S_IO_DRV_A)
+#define V_IO_DRV_A(x) _SB_MAKEVALUE(x,S_IO_DRV_A)
+#define G_IO_DRV_A(x) _SB_GETVALUE(x,S_IO_DRV_A,M_IO_DRV_A)
+
+#define S_IO_DRV_B 6
+#define M_IO_DRV_B _SB_MAKEMASK(2,S_IO_DRV_B)
+#define V_IO_DRV_B(x) _SB_MAKEVALUE(x,S_IO_DRV_B)
+#define G_IO_DRV_B(x) _SB_GETVALUE(x,S_IO_DRV_B,M_IO_DRV_B)
+
+#define S_IO_DRV_C 10
+#define M_IO_DRV_C _SB_MAKEMASK(2,S_IO_DRV_C)
+#define V_IO_DRV_C(x) _SB_MAKEVALUE(x,S_IO_DRV_C)
+#define G_IO_DRV_C(x) _SB_GETVALUE(x,S_IO_DRV_C,M_IO_DRV_C)
+
+#define S_IO_DRV_D 14
+#define M_IO_DRV_D _SB_MAKEMASK(2,S_IO_DRV_D)
+#define V_IO_DRV_D(x) _SB_MAKEVALUE(x,S_IO_DRV_D)
+#define G_IO_DRV_D(x) _SB_GETVALUE(x,S_IO_DRV_D,M_IO_DRV_D)
+
+/*
+ * Generic Bus Output Drive Control Register 1 (Table 14-19)
+ */
+
+#define S_IO_DRV_E 2
+#define M_IO_DRV_E _SB_MAKEMASK(2,S_IO_DRV_E)
+#define V_IO_DRV_E(x) _SB_MAKEVALUE(x,S_IO_DRV_E)
+#define G_IO_DRV_E(x) _SB_GETVALUE(x,S_IO_DRV_E,M_IO_DRV_E)
+
+#define S_IO_DRV_F 6
+#define M_IO_DRV_F _SB_MAKEMASK(2,S_IO_DRV_F)
+#define V_IO_DRV_F(x) _SB_MAKEVALUE(x,S_IO_DRV_F)
+#define G_IO_DRV_F(x) _SB_GETVALUE(x,S_IO_DRV_F,M_IO_DRV_F)
+
+#define S_IO_SLEW1 8
+#define M_IO_SLEW1 _SB_MAKEMASK(2,S_IO_SLEW1)
+#define V_IO_SLEW1(x) _SB_MAKEVALUE(x,S_IO_SLEW1)
+#define G_IO_SLEW1(x) _SB_GETVALUE(x,S_IO_SLEW1,M_IO_SLEW1)
+
+#define S_IO_DRV_G 10
+#define M_IO_DRV_G _SB_MAKEMASK(2,S_IO_DRV_G)
+#define V_IO_DRV_G(x) _SB_MAKEVALUE(x,S_IO_DRV_G)
+#define G_IO_DRV_G(x) _SB_GETVALUE(x,S_IO_DRV_G,M_IO_DRV_G)
+
+#define S_IO_SLEW2 12
+#define M_IO_SLEW2 _SB_MAKEMASK(2,S_IO_SLEW2)
+#define V_IO_SLEW2(x) _SB_MAKEVALUE(x,S_IO_SLEW2)
+#define G_IO_SLEW2(x) _SB_GETVALUE(x,S_IO_SLEW2,M_IO_SLEW2)
+
+#define S_IO_DRV_H 14
+#define M_IO_DRV_H _SB_MAKEMASK(2,S_IO_DRV_H)
+#define V_IO_DRV_H(x) _SB_MAKEVALUE(x,S_IO_DRV_H)
+#define G_IO_DRV_H(x) _SB_GETVALUE(x,S_IO_DRV_H,M_IO_DRV_H)
+
+/*
+ * Generic Bus Output Drive Control Register 2 (Table 14-20)
+ */
+
+#define S_IO_DRV_J 2
+#define M_IO_DRV_J _SB_MAKEMASK(2,S_IO_DRV_J)
+#define V_IO_DRV_J(x) _SB_MAKEVALUE(x,S_IO_DRV_J)
+#define G_IO_DRV_J(x) _SB_GETVALUE(x,S_IO_DRV_J,M_IO_DRV_J)
+
+#define S_IO_DRV_K 6
+#define M_IO_DRV_K _SB_MAKEMASK(2,S_IO_DRV_K)
+#define V_IO_DRV_K(x) _SB_MAKEVALUE(x,S_IO_DRV_K)
+#define G_IO_DRV_K(x) _SB_GETVALUE(x,S_IO_DRV_K,M_IO_DRV_K)
+
+#define S_IO_DRV_L 10
+#define M_IO_DRV_L _SB_MAKEMASK(2,S_IO_DRV_L)
+#define V_IO_DRV_L(x) _SB_MAKEVALUE(x,S_IO_DRV_L)
+#define G_IO_DRV_L(x) _SB_GETVALUE(x,S_IO_DRV_L,M_IO_DRV_L)
+
+#define S_IO_DRV_M 14
+#define M_IO_DRV_M _SB_MAKEMASK(2,S_IO_DRV_M)
+#define V_IO_DRV_M(x) _SB_MAKEVALUE(x,S_IO_DRV_M)
+#define G_IO_DRV_M(x) _SB_GETVALUE(x,S_IO_DRV_M,M_IO_DRV_M)
+
+/*
+ * Generic Bus Output Drive Control Register 3 (Table 14-21)
+ */
+
+#define S_IO_SLEW3 0
+#define M_IO_SLEW3 _SB_MAKEMASK(2,S_IO_SLEW3)
+#define V_IO_SLEW3(x) _SB_MAKEVALUE(x,S_IO_SLEW3)
+#define G_IO_SLEW3(x) _SB_GETVALUE(x,S_IO_SLEW3,M_IO_SLEW3)
+
+#define S_IO_DRV_N 2
+#define M_IO_DRV_N _SB_MAKEMASK(2,S_IO_DRV_N)
+#define V_IO_DRV_N(x) _SB_MAKEVALUE(x,S_IO_DRV_N)
+#define G_IO_DRV_N(x) _SB_GETVALUE(x,S_IO_DRV_N,M_IO_DRV_N)
+
+#define S_IO_DRV_P 6
+#define M_IO_DRV_P _SB_MAKEMASK(2,S_IO_DRV_P)
+#define V_IO_DRV_P(x) _SB_MAKEVALUE(x,S_IO_DRV_P)
+#define G_IO_DRV_P(x) _SB_GETVALUE(x,S_IO_DRV_P,M_IO_DRV_P)
+
+#define S_IO_DRV_Q 10
+#define M_IO_DRV_Q _SB_MAKEMASK(2,S_IO_DRV_Q)
+#define V_IO_DRV_Q(x) _SB_MAKEVALUE(x,S_IO_DRV_Q)
+#define G_IO_DRV_Q(x) _SB_GETVALUE(x,S_IO_DRV_Q,M_IO_DRV_Q)
+
+#define S_IO_DRV_R 14
+#define M_IO_DRV_R _SB_MAKEMASK(2,S_IO_DRV_R)
+#define V_IO_DRV_R(x) _SB_MAKEVALUE(x,S_IO_DRV_R)
+#define G_IO_DRV_R(x) _SB_GETVALUE(x,S_IO_DRV_R,M_IO_DRV_R)
+
/*
* PCMCIA configuration register (Table 12-6)
@@ -202,6 +328,22 @@
#define M_PCMCIA_CFG_RDYMASK _SB_MAKEMASK1(8)
#define M_PCMCIA_CFG_PWRCTL _SB_MAKEMASK1(9)
+#if SIBYTE_HDR_FEATURE_CHIP(1480)
+#define S_PCMCIA_MODE 16
+#define M_PCMCIA_MODE _SB_MAKEMASK(3,S_PCMCIA_MODE)
+#define V_PCMCIA_MODE(x) _SB_MAKEVALUE(x,S_PCMCIA_MODE)
+#define G_PCMCIA_MODE(x) _SB_GETVALUE(x,S_PCMCIA_MODE,M_PCMCIA_MODE)
+
+#define K_PCMCIA_MODE_PCMA_NOB 0 /* standard PCMCIA "A", no "B" */
+#define K_PCMCIA_MODE_IDEA_NOB 1 /* IDE "A", no "B" */
+#define K_PCMCIA_MODE_PCMIOA_NOB 2 /* PCMCIA with I/O "A", no "B" */
+#define K_PCMCIA_MODE_PCMA_PCMB 4 /* standard PCMCIA "A", standard PCMCIA "B" */
+#define K_PCMCIA_MODE_IDEA_PCMB 5 /* IDE "A", standard PCMCIA "B" */
+#define K_PCMCIA_MODE_PCMA_IDEB 6 /* standard PCMCIA "A", IDE "B" */
+#define K_PCMCIA_MODE_IDEA_IDEB 7 /* IDE "A", IDE "B" */
+#endif
+
+
/*
* PCMCIA status register (Table 12-7)
*/
@@ -272,5 +414,62 @@
#define V_GPIO_INTR_TYPE14(x) _SB_MAKEVALUE(x,S_GPIO_INTR_TYPE14)
#define G_GPIO_INTR_TYPE14(x) _SB_GETVALUE(x,S_GPIO_INTR_TYPE14,M_GPIO_INTR_TYPE14)
+#if SIBYTE_HDR_FEATURE_CHIP(1480)
+
+/*
+ * GPIO Interrupt Additional Type Register
+ */
+
+#define K_GPIO_INTR_BOTHEDGE 0
+#define K_GPIO_INTR_RISEEDGE 1
+#define K_GPIO_INTR_UNPRED1 2
+#define K_GPIO_INTR_UNPRED2 3
+
+#define S_GPIO_INTR_ATYPEX(n) (((n)/2)*2)
+#define M_GPIO_INTR_ATYPEX(n) _SB_MAKEMASK(2,S_GPIO_INTR_ATYPEX(n))
+#define V_GPIO_INTR_ATYPEX(n,x) _SB_MAKEVALUE(x,S_GPIO_INTR_ATYPEX(n))
+#define G_GPIO_INTR_ATYPEX(n,x) _SB_GETVALUE(x,S_GPIO_INTR_ATYPEX(n),M_GPIO_INTR_ATYPEX(n))
+
+#define S_GPIO_INTR_ATYPE0 0
+#define M_GPIO_INTR_ATYPE0 _SB_MAKEMASK(2,S_GPIO_INTR_ATYPE0)
+#define V_GPIO_INTR_ATYPE0(x) _SB_MAKEVALUE(x,S_GPIO_INTR_ATYPE0)
+#define G_GPIO_INTR_ATYPE0(x) _SB_GETVALUE(x,S_GPIO_INTR_ATYPE0,M_GPIO_INTR_ATYPE0)
+
+#define S_GPIO_INTR_ATYPE2 2
+#define M_GPIO_INTR_ATYPE2 _SB_MAKEMASK(2,S_GPIO_INTR_ATYPE2)
+#define V_GPIO_INTR_ATYPE2(x) _SB_MAKEVALUE(x,S_GPIO_INTR_ATYPE2)
+#define G_GPIO_INTR_ATYPE2(x) _SB_GETVALUE(x,S_GPIO_INTR_ATYPE2,M_GPIO_INTR_ATYPE2)
+
+#define S_GPIO_INTR_ATYPE4 4
+#define M_GPIO_INTR_ATYPE4 _SB_MAKEMASK(2,S_GPIO_INTR_ATYPE4)
+#define V_GPIO_INTR_ATYPE4(x) _SB_MAKEVALUE(x,S_GPIO_INTR_ATYPE4)
+#define G_GPIO_INTR_ATYPE4(x) _SB_GETVALUE(x,S_GPIO_INTR_ATYPE4,M_GPIO_INTR_ATYPE4)
+
+#define S_GPIO_INTR_ATYPE6 6
+#define M_GPIO_INTR_ATYPE6 _SB_MAKEMASK(2,S_GPIO_INTR_ATYPE6)
+#define V_GPIO_INTR_ATYPE6(x) _SB_MAKEVALUE(x,S_GPIO_INTR_ATYPE6)
+#define G_GPIO_INTR_ATYPE6(x) _SB_GETVALUE(x,S_GPIO_INTR_ATYPE6,M_GPIO_INTR_ATYPE6)
+
+#define S_GPIO_INTR_ATYPE8 8
+#define M_GPIO_INTR_ATYPE8 _SB_MAKEMASK(2,S_GPIO_INTR_ATYPE8)
+#define V_GPIO_INTR_ATYPE8(x) _SB_MAKEVALUE(x,S_GPIO_INTR_ATYPE8)
+#define G_GPIO_INTR_ATYPE8(x) _SB_GETVALUE(x,S_GPIO_INTR_ATYPE8,M_GPIO_INTR_ATYPE8)
+
+#define S_GPIO_INTR_ATYPE10 10
+#define M_GPIO_INTR_ATYPE10 _SB_MAKEMASK(2,S_GPIO_INTR_ATYPE10)
+#define V_GPIO_INTR_ATYPE10(x) _SB_MAKEVALUE(x,S_GPIO_INTR_ATYPE10)
+#define G_GPIO_INTR_ATYPE10(x) _SB_GETVALUE(x,S_GPIO_INTR_ATYPE10,M_GPIO_INTR_ATYPE10)
+
+#define S_GPIO_INTR_ATYPE12 12
+#define M_GPIO_INTR_ATYPE12 _SB_MAKEMASK(2,S_GPIO_INTR_ATYPE12)
+#define V_GPIO_INTR_ATYPE12(x) _SB_MAKEVALUE(x,S_GPIO_INTR_ATYPE12)
+#define G_GPIO_INTR_ATYPE12(x) _SB_GETVALUE(x,S_GPIO_INTR_ATYPE12,M_GPIO_INTR_ATYPE12)
+
+#define S_GPIO_INTR_ATYPE14 14
+#define M_GPIO_INTR_ATYPE14 _SB_MAKEMASK(2,S_GPIO_INTR_ATYPE14)
+#define V_GPIO_INTR_ATYPE14(x) _SB_MAKEVALUE(x,S_GPIO_INTR_ATYPE14)
+#define G_GPIO_INTR_ATYPE14(x) _SB_GETVALUE(x,S_GPIO_INTR_ATYPE14,M_GPIO_INTR_ATYPE14)
+#endif
+
#endif
Index: lmo/include/asm-mips/sibyte/sb1250_int.h
===================================================================
--- lmo.orig/include/asm-mips/sibyte/sb1250_int.h 2005-10-19 22:34:08.000000000 -0700
+++ lmo/include/asm-mips/sibyte/sb1250_int.h 2005-10-19 22:34:11.000000000 -0700
@@ -47,6 +47,10 @@
* First, the interrupt numbers.
*/
+#if SIBYTE_HDR_FEATURE_1250_112x
+
+#define K_INT_SOURCES 64
+
#define K_INT_WATCHDOG_TIMER_0 0
#define K_INT_WATCHDOG_TIMER_1 1
#define K_INT_TIMER_0 2
@@ -244,4 +248,6 @@
#define M_LDTVECT_RAISEMBOX 0x40
+#endif /* 1250/112x */
+
#endif
Index: lmo/include/asm-mips/sibyte/sb1250_l2c.h
===================================================================
--- lmo.orig/include/asm-mips/sibyte/sb1250_l2c.h 2005-10-19 22:34:08.000000000 -0700
+++ lmo/include/asm-mips/sibyte/sb1250_l2c.h 2005-10-19 22:34:11.000000000 -0700
@@ -89,8 +89,13 @@
#define V_L2C_MGMT_WAY(x) _SB_MAKEVALUE(x,S_L2C_MGMT_WAY)
#define G_L2C_MGMT_WAY(x) _SB_GETVALUE(x,S_L2C_MGMT_WAY,M_L2C_MGMT_WAY)
-#define S_L2C_MGMT_TAG 21
-#define M_L2C_MGMT_TAG _SB_MAKEMASK(6,S_L2C_MGMT_TAG)
+#define S_L2C_MGMT_ECC_DIAG 21
+#define M_L2C_MGMT_ECC_DIAG _SB_MAKEMASK(2,S_L2C_MGMT_ECC_DIAG)
+#define V_L2C_MGMT_ECC_DIAG(x) _SB_MAKEVALUE(x,S_L2C_MGMT_ECC_DIAG)
+#define G_L2C_MGMT_ECC_DIAG(x) _SB_GETVALUE(x,S_L2C_MGMT_ECC_DIAG,M_L2C_MGMT_ECC_DIAG)
+
+#define S_L2C_MGMT_TAG 23
+#define M_L2C_MGMT_TAG _SB_MAKEMASK(4,S_L2C_MGMT_TAG)
#define V_L2C_MGMT_TAG(x) _SB_MAKEVALUE(x,S_L2C_MGMT_TAG)
#define G_L2C_MGMT_TAG(x) _SB_GETVALUE(x,S_L2C_MGMT_TAG,M_L2C_MGMT_TAG)
Index: lmo/include/asm-mips/sibyte/sb1250_mac.h
===================================================================
--- lmo.orig/include/asm-mips/sibyte/sb1250_mac.h 2005-10-19 22:34:08.000000000 -0700
+++ lmo/include/asm-mips/sibyte/sb1250_mac.h 2005-10-19 22:34:11.000000000 -0700
@@ -81,7 +81,10 @@
#define M_MAC_RESERVED1 _SB_MAKEMASK(8,9)
#define M_MAC_AP_STAT_EN _SB_MAKEMASK1(17)
-#define M_MAC_RESERVED2 _SB_MAKEMASK1(18)
+
+#if SIBYTE_HDR_FEATURE_CHIP(1480)
+#define M_MAC_TIMESTAMP _SB_MAKEMASK1(18)
+#endif
#define M_MAC_DRP_ERRPKT_EN _SB_MAKEMASK1(19)
#define M_MAC_DRP_FCSERRPKT_EN _SB_MAKEMASK1(20)
#define M_MAC_DRP_CODEERRPKT_EN _SB_MAKEMASK1(21)
@@ -132,9 +135,9 @@
#define M_MAC_RX_CH_SEL_MSB _SB_MAKEMASK1(44)
#endif /* 1250 PASS2 || 112x PASS1 */
-#if SIBYTE_HDR_FEATURE(1250, PASS3) || SIBYTE_HDR_FEATURE(112x, PASS1)
+#if SIBYTE_HDR_FEATURE(1250, PASS3) || SIBYTE_HDR_FEATURE(112x, PASS1) || SIBYTE_HDR_FEATURE_CHIP(1480)
#define M_MAC_SPLIT_CH_SEL _SB_MAKEMASK1(45)
-#endif /* 1250 PASS3 || 112x PASS1 */
+#endif /* 1250 PASS3 || 112x PASS1 || 1480 */
#define S_MAC_BYPASS_IFG _SB_MAKE64(46)
#define M_MAC_BYPASS_IFG _SB_MAKEMASK(8,S_MAC_BYPASS_IFG)
@@ -176,10 +179,22 @@
#define M_MAC_PORT_RESET _SB_MAKEMASK1(8)
+#if (SIBYTE_HDR_FEATURE_CHIP(1250) || SIBYTE_HDR_FEATURE_CHIP(112x))
#define M_MAC_RX_ENABLE _SB_MAKEMASK1(10)
#define M_MAC_TX_ENABLE _SB_MAKEMASK1(11)
#define M_MAC_BYP_RX_ENABLE _SB_MAKEMASK1(12)
#define M_MAC_BYP_TX_ENABLE _SB_MAKEMASK1(13)
+#endif
+
+/*
+ * MAC reset information register (1280/1255)
+ */
+#if SIBYTE_HDR_FEATURE_CHIP(1480)
+#define M_MAC_RX_CH0_PAUSE_ON _SB_MAKEMASK1(8)
+#define M_MAC_RX_CH1_PAUSE_ON _SB_MAKEMASK1(16)
+#define M_MAC_TX_CH0_PAUSE_ON _SB_MAKEMASK1(24)
+#define M_MAC_TX_CH1_PAUSE_ON _SB_MAKEMASK1(32)
+#endif
/*
* MAC DMA Control Register
@@ -267,12 +282,12 @@
#define V_MAC_IFG_RX(x) _SB_MAKEVALUE(x,S_MAC_IFG_RX)
#define G_MAC_IFG_RX(x) _SB_GETVALUE(x,S_MAC_IFG_RX,M_MAC_IFG_RX)
-#if SIBYTE_HDR_FEATURE(1250, PASS3) || SIBYTE_HDR_FEATURE(112x, PASS1)
+#if SIBYTE_HDR_FEATURE(1250, PASS3) || SIBYTE_HDR_FEATURE(112x, PASS1) || SIBYTE_HDR_FEATURE_CHIP(1480)
#define S_MAC_PRE_LEN _SB_MAKE64(0)
#define M_MAC_PRE_LEN _SB_MAKEMASK(6,S_MAC_PRE_LEN)
#define V_MAC_PRE_LEN(x) _SB_MAKEVALUE(x,S_MAC_PRE_LEN)
#define G_MAC_PRE_LEN(x) _SB_GETVALUE(x,S_MAC_PRE_LEN,M_MAC_PRE_LEN)
-#endif /* 1250 PASS3 || 112x PASS1 */
+#endif /* 1250 PASS3 || 112x PASS1 || 1480 */
#define S_MAC_IFG_TX _SB_MAKE64(6)
#define M_MAC_IFG_TX _SB_MAKEMASK(6,S_MAC_IFG_TX)
@@ -458,9 +473,9 @@
#define V_MAC_COUNTER_ADDR(x) _SB_MAKEVALUE(x,S_MAC_COUNTER_ADDR)
#define G_MAC_COUNTER_ADDR(x) _SB_GETVALUE(x,S_MAC_COUNTER_ADDR,M_MAC_COUNTER_ADDR)
-#if SIBYTE_HDR_FEATURE(1250, PASS3) || SIBYTE_HDR_FEATURE(112x, PASS1)
+#if SIBYTE_HDR_FEATURE(1250, PASS3) || SIBYTE_HDR_FEATURE(112x, PASS1) || SIBYTE_HDR_FEATURE_CHIP(1480)
#define M_MAC_TX_PAUSE_ON _SB_MAKEMASK1(52)
-#endif /* 1250 PASS3 || 112x PASS1 */
+#endif /* 1250 PASS3 || 112x PASS1 || 1480 */
/*
* MAC Fifo Pointer Registers (Table 9-19) [Debug register]
@@ -594,7 +609,7 @@
#define V_MAC_IPHDR_OFFSET(x) _SB_MAKEVALUE(x,S_MAC_IPHDR_OFFSET)
#define G_MAC_IPHDR_OFFSET(x) _SB_GETVALUE(x,S_MAC_IPHDR_OFFSET,M_MAC_IPHDR_OFFSET)
-#if SIBYTE_HDR_FEATURE(1250, PASS3) || SIBYTE_HDR_FEATURE(112x, PASS1)
+#if SIBYTE_HDR_FEATURE(1250, PASS3) || SIBYTE_HDR_FEATURE(112x, PASS1) || SIBYTE_HDR_FEATURE_CHIP(1480)
#define S_MAC_RX_CRC_OFFSET _SB_MAKE64(16)
#define M_MAC_RX_CRC_OFFSET _SB_MAKEMASK(8,S_MAC_RX_CRC_OFFSET)
#define V_MAC_RX_CRC_OFFSET(x) _SB_MAKEVALUE(x,S_MAC_RX_CRC_OFFSET)
@@ -612,7 +627,7 @@
#define M_MAC_RX_CH_MSN_SEL _SB_MAKEMASK(8,S_MAC_RX_CH_MSN_SEL)
#define V_MAC_RX_CH_MSN_SEL(x) _SB_MAKEVALUE(x,S_MAC_RX_CH_MSN_SEL)
#define G_MAC_RX_CH_MSN_SEL(x) _SB_GETVALUE(x,S_MAC_RX_CH_MSN_SEL,M_MAC_RX_CH_MSN_SEL)
-#endif /* 1250 PASS3 || 112x PASS1 */
+#endif /* 1250 PASS3 || 112x PASS1 || 1480 */
/*
* MAC Receive Channel Select Registers (Table 9-25)
Index: lmo/include/asm-mips/sibyte/sb1250_regs.h
===================================================================
--- lmo.orig/include/asm-mips/sibyte/sb1250_regs.h 2005-10-19 22:34:08.000000000 -0700
+++ lmo/include/asm-mips/sibyte/sb1250_regs.h 2005-10-19 22:34:11.000000000 -0700
@@ -61,6 +61,8 @@
* XXX: can't remove MC base 0 if 112x, since it's used by other macros,
* since there is one reg there (but it could get its addr/offset constant).
*/
+
+#if SIBYTE_HDR_FEATURE_1250_112x /* This MC only on 1250 & 112x */
#define A_MC_BASE_0 0x0010051000
#define A_MC_BASE_1 0x0010052000
#define MC_REGISTER_SPACING 0x1000
@@ -101,10 +103,14 @@
#define R_MC_TEST_ECC 0x0000000420
#define R_MC_MCLK_CFG 0x0000000500
+#endif /* 1250 & 112x */
+
/* *********************************************************************
* L2 Cache Control Registers
********************************************************************* */
+#if SIBYTE_HDR_FEATURE_1250_112x /* This L2C only on 1250/112x */
+
#define A_L2_READ_TAG 0x0010040018
#define A_L2_ECC_TAG 0x0010040038
#if SIBYTE_HDR_FEATURE(1250, PASS3) || SIBYTE_HDR_FEATURE(112x, PASS1)
@@ -125,13 +131,16 @@
#define A_L2_READ_ADDRESS A_L2_READ_TAG
#define A_L2_EEC_ADDRESS A_L2_ECC_TAG
+#endif
/* *********************************************************************
* PCI Interface Registers
********************************************************************* */
+#if SIBYTE_HDR_FEATURE_1250_112x /* This PCI/HT only on 1250/112x */
#define A_PCI_TYPE00_HEADER 0x00DE000000
#define A_PCI_TYPE01_HEADER 0x00DE000800
+#endif
/* *********************************************************************
@@ -264,15 +273,15 @@
********************************************************************* */
+#if SIBYTE_HDR_FEATURE_1250_112x /* This MC only on 1250 & 112x */
#define R_DUART_NUM_PORTS 2
#define A_DUART 0x0010060000
-#define A_DUART_REG(r)
-
#define DUART_CHANREG_SPACING 0x100
#define A_DUART_CHANREG(chan,reg) (A_DUART + DUART_CHANREG_SPACING*(chan) + (reg))
#define R_DUART_CHANREG(chan,reg) (DUART_CHANREG_SPACING*(chan) + (reg))
+#endif /* 1250 & 112x */
#define R_DUART_MODE_REG_1 0x100
#define R_DUART_MODE_REG_2 0x110
@@ -307,11 +316,13 @@
#define DUART_IMRISR_SPACING 0x20
+#if SIBYTE_HDR_FEATURE_1250_112x /* This MC only on 1250 & 112x */
#define R_DUART_IMRREG(chan) (R_DUART_IMR_A + (chan)*DUART_IMRISR_SPACING)
#define R_DUART_ISRREG(chan) (R_DUART_ISR_A + (chan)*DUART_IMRISR_SPACING)
#define A_DUART_IMRREG(chan) (A_DUART + R_DUART_IMRREG(chan))
#define A_DUART_ISRREG(chan) (A_DUART + R_DUART_ISRREG(chan))
+#endif /* 1250 & 112x */
@@ -368,6 +379,8 @@
********************************************************************* */
+#if SIBYTE_HDR_FEATURE_1250_112x /* sync serial only on 1250/112x */
+
#define A_SER_BASE_0 0x0010060400
#define A_SER_BASE_1 0x0010060800
#define SER_SPACING 0x400
@@ -457,6 +470,8 @@
#define R_SER_RMON_RX_ERRORS 0x000001F0
#define R_SER_RMON_RX_BADADDR 0x000001F8
+#endif /* 1250/112x */
+
/* *********************************************************************
* Generic Bus Registers
********************************************************************* */
@@ -634,12 +649,13 @@
#if SIBYTE_HDR_FEATURE(1250, PASS2) || SIBYTE_HDR_FEATURE(112x, PASS1)
#define A_SCD_SCRATCH 0x0010020C10
+#endif /* 1250 PASS2 || 112x PASS1 */
+#if SIBYTE_HDR_FEATURE(1250, PASS2) || SIBYTE_HDR_FEATURE(112x, PASS1) || SIBYTE_HDR_FEATURE_CHIP(1480)
#define A_SCD_ZBBUS_CYCLE_COUNT 0x0010030000
#define A_SCD_ZBBUS_CYCLE_CP0 0x0010020C00
#define A_SCD_ZBBUS_CYCLE_CP1 0x0010020C08
-#endif /* 1250 PASS2 || 112x PASS1 */
-
+#endif
/* *********************************************************************
* System Control Registers
@@ -667,15 +683,16 @@
#define A_ADDR_TRAP_CFG_1 0x0010020448
#define A_ADDR_TRAP_CFG_2 0x0010020450
#define A_ADDR_TRAP_CFG_3 0x0010020458
-#if SIBYTE_HDR_FEATURE(1250, PASS2) || SIBYTE_HDR_FEATURE(112x, PASS1)
+#if SIBYTE_HDR_FEATURE(1250, PASS2) || SIBYTE_HDR_FEATURE(112x, PASS1) || SIBYTE_HDR_FEATURE_CHIP(1480)
#define A_ADDR_TRAP_REG_DEBUG 0x0010020460
-#endif /* 1250 PASS2 || 112x PASS1 */
+#endif /* 1250 PASS2 || 112x PASS1 || 1480 */
/* *********************************************************************
* System Interrupt Mapper Registers
********************************************************************* */
+#if SIBYTE_HDR_FEATURE_1250_112x
#define A_IMR_CPU0_BASE 0x0010020000
#define A_IMR_CPU1_BASE 0x0010022000
#define IMR_REGISTER_SPACING 0x2000
@@ -700,6 +717,7 @@
#define R_IMR_INTERRUPT_STATUS_COUNT 7
#define R_IMR_INTERRUPT_MAP_BASE 0x0200
#define R_IMR_INTERRUPT_MAP_COUNT 64
+#endif /* 1250/112x */
/* *********************************************************************
* System Performance Counter Registers
@@ -718,6 +736,7 @@
#define A_SCD_BUS_ERR_STATUS 0x0010020880
#if SIBYTE_HDR_FEATURE(1250, PASS2) || SIBYTE_HDR_FEATURE(112x, PASS1)
#define A_SCD_BUS_ERR_STATUS_DEBUG 0x00100208D0
+#define A_BUS_ERR_STATUS_DEBUG 0x00100208D0
#endif /* 1250 PASS2 || 112x PASS1 */
#define A_BUS_ERR_DATA_0 0x00100208A0
#define A_BUS_ERR_DATA_1 0x00100208A8
@@ -798,6 +817,7 @@
* Physical Address Map
********************************************************************* */
+#if SIBYTE_HDR_FEATURE_1250_112x
#define A_PHYS_MEMORY_0 _SB_MAKE64(0x0000000000)
#define A_PHYS_MEMORY_SIZE _SB_MAKE64((256*1024*1024))
#define A_PHYS_SYSTEM_CTL _SB_MAKE64(0x0010000000)
@@ -831,6 +851,7 @@
#define A_PHYS_L2CACHE_WAY1 _SB_MAKE64(0x00D01A0000)
#define A_PHYS_L2CACHE_WAY2 _SB_MAKE64(0x00D01C0000)
#define A_PHYS_L2CACHE_WAY3 _SB_MAKE64(0x00D01E0000)
+#endif
#endif
Index: lmo/include/asm-mips/sibyte/sb1250_scd.h
===================================================================
--- lmo.orig/include/asm-mips/sibyte/sb1250_scd.h 2005-10-19 22:34:08.000000000 -0700
+++ lmo/include/asm-mips/sibyte/sb1250_scd.h 2005-10-19 22:34:11.000000000 -0700
@@ -51,26 +51,70 @@
#define V_SYS_REVISION(x) _SB_MAKEVALUE(x,S_SYS_REVISION)
#define G_SYS_REVISION(x) _SB_GETVALUE(x,S_SYS_REVISION,M_SYS_REVISION)
-#if SIBYTE_HDR_FEATURE_CHIP(1250)
-#define K_SYS_REVISION_BCM1250_PASS1 1
-#define K_SYS_REVISION_BCM1250_PASS2 3
-#define K_SYS_REVISION_BCM1250_A10 11
-#define K_SYS_REVISION_BCM1250_PASS2_2 16
-#define K_SYS_REVISION_BCM1250_B2 17
-#define K_SYS_REVISION_BCM1250_PASS3 32
-#define K_SYS_REVISION_BCM1250_C1 33
+#define K_SYS_REVISION_BCM1250_PASS1 0x01
+
+#define K_SYS_REVISION_BCM1250_PASS2 0x03
+#define K_SYS_REVISION_BCM1250_A1 0x03 /* Pass 2.0 WB */
+#define K_SYS_REVISION_BCM1250_A2 0x04 /* Pass 2.0 FC */
+#define K_SYS_REVISION_BCM1250_A3 0x05 /* Pass 2.1 FC */
+#define K_SYS_REVISION_BCM1250_A4 0x06 /* Pass 2.1 WB */
+#define K_SYS_REVISION_BCM1250_A6 0x07 /* OR 0x04 (A2) w/WID != 0 */
+#define K_SYS_REVISION_BCM1250_A8 0x0b /* A8/A10 */
+#define K_SYS_REVISION_BCM1250_A9 0x08
+#define K_SYS_REVISION_BCM1250_A10 K_SYS_REVISION_BCM1250_A8
+
+#define K_SYS_REVISION_BCM1250_PASS2_2 0x10
+#define K_SYS_REVISION_BCM1250_B0 K_SYS_REVISION_BCM1250_B1
+#define K_SYS_REVISION_BCM1250_B1 0x10
+#define K_SYS_REVISION_BCM1250_B2 0x11
+
+#define K_SYS_REVISION_BCM1250_C0 0x20
+#define K_SYS_REVISION_BCM1250_C1 0x21
+#define K_SYS_REVISION_BCM1250_C2 0x22
+#define K_SYS_REVISION_BCM1250_C3 0x23
+#if SIBYTE_HDR_FEATURE_CHIP(1250)
/* XXX: discourage people from using these constants. */
#define K_SYS_REVISION_PASS1 K_SYS_REVISION_BCM1250_PASS1
#define K_SYS_REVISION_PASS2 K_SYS_REVISION_BCM1250_PASS2
#define K_SYS_REVISION_PASS2_2 K_SYS_REVISION_BCM1250_PASS2_2
#define K_SYS_REVISION_PASS3 K_SYS_REVISION_BCM1250_PASS3
+#define K_SYS_REVISION_BCM1250_PASS3 K_SYS_REVISION_BCM1250_C0
#endif /* 1250 */
-#if SIBYTE_HDR_FEATURE_CHIP(112x)
-#define K_SYS_REVISION_BCM112x_A1 32
-#define K_SYS_REVISION_BCM112x_A2 33
-#endif /* 112x */
+#define K_SYS_REVISION_BCM112x_A1 0x20
+#define K_SYS_REVISION_BCM112x_A2 0x21
+#define K_SYS_REVISION_BCM112x_A3 0x22
+#define K_SYS_REVISION_BCM112x_A4 0x23
+
+#define K_SYS_REVISION_BCM1480_S0 0x01
+#define K_SYS_REVISION_BCM1480_A1 0x02
+#define K_SYS_REVISION_BCM1480_A2 0x03
+#define K_SYS_REVISION_BCM1480_A3 0x04
+#define K_SYS_REVISION_BCM1480_B0 0x11
+
+/*Cache size - 23:20 of revision register*/
+#define S_SYS_L2C_SIZE _SB_MAKE64(20)
+#define M_SYS_L2C_SIZE _SB_MAKEMASK(4,S_SYS_L2C_SIZE)
+#define V_SYS_L2C_SIZE(x) _SB_MAKEVALUE(x,S_SYS_L2C_SIZE)
+#define G_SYS_L2C_SIZE(x) _SB_GETVALUE(x,S_SYS_L2C_SIZE,M_SYS_L2C_SIZE)
+
+#define K_SYS_L2C_SIZE_1MB 0
+#define K_SYS_L2C_SIZE_512KB 5
+#define K_SYS_L2C_SIZE_256KB 2
+#define K_SYS_L2C_SIZE_128KB 1
+
+#define K_SYS_L2C_SIZE_BCM1250 K_SYS_L2C_SIZE_512KB
+#define K_SYS_L2C_SIZE_BCM1125 K_SYS_L2C_SIZE_256KB
+#define K_SYS_L2C_SIZE_BCM1122 K_SYS_L2C_SIZE_128KB
+
+
+/* Number of CPU cores, bits 27:24 of revision register*/
+#define S_SYS_NUM_CPUS _SB_MAKE64(24)
+#define M_SYS_NUM_CPUS _SB_MAKEMASK(4,S_SYS_NUM_CPUS)
+#define V_SYS_NUM_CPUS(x) _SB_MAKEVALUE(x,S_SYS_NUM_CPUS)
+#define G_SYS_NUM_CPUS(x) _SB_GETVALUE(x,S_SYS_NUM_CPUS,M_SYS_NUM_CPUS)
+
/* XXX: discourage people from using these constants. */
#define S_SYS_PART _SB_MAKE64(16)
@@ -83,6 +127,8 @@
#define K_SYS_PART_BCM1120 0x1121
#define K_SYS_PART_BCM1125 0x1123
#define K_SYS_PART_BCM1125H 0x1124
+#define K_SYS_PART_BCM1122 0x1113
+
/* The "peripheral set" (SOC type) is the low 4 bits of the "part" field. */
#define S_SYS_SOC_TYPE _SB_MAKE64(16)
@@ -96,6 +142,8 @@
#define K_SYS_SOC_TYPE_BCM1125 0x3
#define K_SYS_SOC_TYPE_BCM1125H 0x4
#define K_SYS_SOC_TYPE_BCM1250_ALT2 0x5 /* 1250pass2 w/ 1/2 L2. */
+#define K_SYS_SOC_TYPE_BCM1x80 0x6
+#define K_SYS_SOC_TYPE_BCM1x55 0x7
/*
* Calculate correct SOC type given a copy of system revision register.
@@ -127,10 +175,12 @@
#define V_SYS_WID(x) _SB_MAKEVALUE(x,S_SYS_WID)
#define G_SYS_WID(x) _SB_GETVALUE(x,S_SYS_WID,M_SYS_WID)
-/* System Manufacturing Register
-* Register: SCD_SYSTEM_MANUF
-*/
+/*
+ * System Manufacturing Register
+ * Register: SCD_SYSTEM_MANUF
+ */
+#if SIBYTE_HDR_FEATURE_1250_112x
/* Wafer ID: bits 31:0 */
#define S_SYS_WAFERID1_200 _SB_MAKE64(0)
#define M_SYS_WAFERID1_200 _SB_MAKEMASK(32,S_SYS_WAFERID1_200)
@@ -139,8 +189,8 @@
#define S_SYS_BIN _SB_MAKE64(32)
#define M_SYS_BIN _SB_MAKEMASK(4,S_SYS_BIN)
-#define V_SYS_BIN _SB_MAKEVALUE(x,S_SYS_BIN)
-#define G_SYS_BIN _SB_GETVALUE(x,S_SYS_BIN,M_SYS_BIN)
+#define V_SYS_BIN(x) _SB_MAKEVALUE(x,S_SYS_BIN)
+#define G_SYS_BIN(x) _SB_GETVALUE(x,S_SYS_BIN,M_SYS_BIN)
/* Wafer ID: bits 39:36 */
#define S_SYS_WAFERID2_200 _SB_MAKE64(36)
@@ -163,12 +213,14 @@
#define M_SYS_YPOS _SB_MAKEMASK(6,S_SYS_YPOS)
#define V_SYS_YPOS(x) _SB_MAKEVALUE(x,S_SYS_YPOS)
#define G_SYS_YPOS(x) _SB_GETVALUE(x,S_SYS_YPOS,M_SYS_YPOS)
+#endif
/*
* System Config Register (Table 4-2)
* Register: SCD_SYSTEM_CFG
*/
+#if SIBYTE_HDR_FEATURE_1250_112x
#define M_SYS_LDT_PLL_BYP _SB_MAKEMASK1(3)
#define M_SYS_PCI_SYNC_TEST_MODE _SB_MAKEMASK1(4)
#define M_SYS_IOB0_DIV _SB_MAKEMASK1(5)
@@ -253,6 +305,8 @@
#define M_SYS_SW_FLAG _SB_MAKEMASK1(63)
#endif /* 1250 PASS2 || 112x PASS1 */
+#endif
+
/*
* Mailbox Registers (Table 4-3)
@@ -326,6 +380,7 @@
* System Performance Counters
*/
+#if SIBYTE_HDR_FEATURE_1250_112x
#define S_SPC_CFG_SRC0 0
#define M_SPC_CFG_SRC0 _SB_MAKEMASK(8,S_SPC_CFG_SRC0)
#define V_SPC_CFG_SRC0(x) _SB_MAKEVALUE(x,S_SPC_CFG_SRC0)
@@ -348,6 +403,7 @@
#define M_SPC_CFG_CLEAR _SB_MAKEMASK1(32)
#define M_SPC_CFG_ENABLE _SB_MAKEMASK1(33)
+#endif
/*
@@ -412,6 +468,7 @@
* Address Trap Registers
*/
+#if SIBYTE_HDR_FEATURE_1250_112x
#define M_ATRAP_INDEX _SB_MAKEMASK(4,0)
#define M_ATRAP_ADDRESS _SB_MAKEMASK(40,0)
@@ -436,7 +493,6 @@
#define K_BUS_AGENT_IOB0 2
#define K_BUS_AGENT_IOB1 3
#define K_BUS_AGENT_SCD 4
-#define K_BUS_AGENT_RESERVED 5
#define K_BUS_AGENT_L2C 6
#define K_BUS_AGENT_MC 7
@@ -454,10 +510,14 @@
#define K_ATRAP_CFG_CATTR_NOTNONCOH 6
#define K_ATRAP_CFG_CATTR_NOTCOHERENT 7
+#endif /* 1250/112x */
+
/*
* Trace Buffer Config register
*/
+#if SIBYTE_HDR_FEATURE_1250_112x
+
#define M_SCD_TRACE_CFG_RESET _SB_MAKEMASK1(0)
#define M_SCD_TRACE_CFG_START_READ _SB_MAKEMASK1(1)
#define M_SCD_TRACE_CFG_START _SB_MAKEMASK1(2)
@@ -475,6 +535,8 @@
#define V_SCD_TRACE_CFG_CUR_ADDR(x) _SB_MAKEVALUE(x,S_SCD_TRACE_CFG_CUR_ADDR)
#define G_SCD_TRACE_CFG_CUR_ADDR(x) _SB_GETVALUE(x,S_SCD_TRACE_CFG_CUR_ADDR,M_SCD_TRACE_CFG_CUR_ADDR)
+#endif /* 1250/112x */
+
/*
* Trace Event registers
*/
@@ -578,5 +640,7 @@
#define M_SCD_TRSEQ_DEBUGPIN _SB_MAKEMASK1(20)
#define M_SCD_TRSEQ_DEBUGCPU _SB_MAKEMASK1(21)
#define M_SCD_TRSEQ_CLEARUSE _SB_MAKEMASK1(22)
+#define M_SCD_TRSEQ_ALLD_A _SB_MAKEMASK1(23)
+#define M_SCD_TRSEQ_ALL_A _SB_MAKEMASK1(24)
#endif
Index: lmo/include/asm-mips/sibyte/sb1250_smbus.h
===================================================================
--- lmo.orig/include/asm-mips/sibyte/sb1250_smbus.h 2005-10-19 22:34:08.000000000 -0700
+++ lmo/include/asm-mips/sibyte/sb1250_smbus.h 2005-10-19 22:34:11.000000000 -0700
@@ -47,6 +47,7 @@
#define K_SMB_FREQ_400KHZ 0x1F
#define K_SMB_FREQ_100KHZ 0x7D
+#define K_SMB_FREQ_10KHZ 1250
#define S_SMB_CMD 0
#define M_SMB_CMD _SB_MAKEMASK(8,S_SMB_CMD)
@@ -58,7 +59,11 @@
#define M_SMB_ERR_INTR _SB_MAKEMASK1(0)
#define M_SMB_FINISH_INTR _SB_MAKEMASK1(1)
-#define M_SMB_DATA_OUT _SB_MAKEMASK1(4)
+
+#define S_SMB_DATA_OUT 4
+#define M_SMB_DATA_OUT _SB_MAKEMASK1(S_SMB_DATA_OUT)
+#define V_SMB_DATA_OUT(x) _SB_MAKEVALUE(x,S_SMB_DATA_OUT)
+
#define M_SMB_DATA_DIR _SB_MAKEMASK1(5)
#define M_SMB_DATA_DIR_OUTPUT M_SMB_DATA_DIR
#define M_SMB_CLK_OUT _SB_MAKEMASK1(6)
@@ -71,8 +76,23 @@
#define M_SMB_BUSY _SB_MAKEMASK1(0)
#define M_SMB_ERROR _SB_MAKEMASK1(1)
#define M_SMB_ERROR_TYPE _SB_MAKEMASK1(2)
-#define M_SMB_REF _SB_MAKEMASK1(6)
-#define M_SMB_DATA_IN _SB_MAKEMASK1(7)
+
+#if SIBYTE_HDR_FEATURE(1250, PASS3) || SIBYTE_HDR_FEATURE(112x, PASS1) || SIBYTE_HDR_FEATURE_CHIP(1480)
+#define S_SMB_SCL_IN 5
+#define M_SMB_SCL_IN _SB_MAKEMASK1(S_SMB_SCL_IN)
+#define V_SMB_SCL_IN(x) _SB_MAKEVALUE(x,S_SMB_SCL_IN)
+#define G_SMB_SCL_IN(x) _SB_GETVALUE(x,S_SMB_SCL_IN,M_SMB_SCL_IN)
+#endif /* 1250 PASS3 || 112x PASS1 || 1480 */
+
+#define S_SMB_REF 6
+#define M_SMB_REF _SB_MAKEMASK1(S_SMB_REF)
+#define V_SMB_REF(x) _SB_MAKEVALUE(x,S_SMB_REF)
+#define G_SMB_REF(x) _SB_GETVALUE(x,S_SMB_REF,M_SMB_REF)
+
+#define S_SMB_DATA_IN 7
+#define M_SMB_DATA_IN _SB_MAKEMASK1(S_SMB_DATA_IN)
+#define V_SMB_DATA_IN(x) _SB_MAKEVALUE(x,S_SMB_DATA_IN)
+#define G_SMB_DATA_IN(x) _SB_GETVALUE(x,S_SMB_DATA_IN,M_SMB_DATA_IN)
/*
* SMBus Start/Command registers (Table 14-9)
@@ -132,16 +152,14 @@
#define V_SPEC_MB(x) _SB_MAKEVALUE(x,S_SPEC_PEC)
-#if SIBYTE_HDR_FEATURE(1250, PASS2) || SIBYTE_HDR_FEATURE(112x, PASS1)
+#if SIBYTE_HDR_FEATURE(1250, PASS2) || SIBYTE_HDR_FEATURE(112x, PASS1) || SIBYTE_HDR_FEATURE_CHIP(1480)
#define S_SMB_CMDH 8
-#define M_SMB_CMDH _SB_MAKEMASK(8,S_SMBH_CMD)
-#define V_SMB_CMDH(x) _SB_MAKEVALUE(x,S_SMBH_CMD)
+#define M_SMB_CMDH _SB_MAKEMASK(8,S_SMB_CMDH)
+#define V_SMB_CMDH(x) _SB_MAKEVALUE(x,S_SMB_CMDH)
#define M_SMB_EXTEND _SB_MAKEMASK1(14)
-#define M_SMB_DIR _SB_MAKEMASK1(13)
-
#define S_SMB_DFMT 8
#define M_SMB_DFMT _SB_MAKEMASK(3,S_SMB_DFMT)
#define V_SMB_DFMT(x) _SB_MAKEVALUE(x,S_SMB_DFMT)
@@ -165,6 +183,23 @@
#define V_SMB_DFMT_CMD5BYTE V_SMB_DFMT(K_SMB_DFMT_CMD5BYTE)
#define V_SMB_DFMT_RESERVED V_SMB_DFMT(K_SMB_DFMT_RESERVED)
-#endif /* 1250 PASS2 || 112x PASS1 */
+#define S_SMB_AFMT 11
+#define M_SMB_AFMT _SB_MAKEMASK(2,S_SMB_AFMT)
+#define V_SMB_AFMT(x) _SB_MAKEVALUE(x,S_SMB_AFMT)
+#define G_SMB_AFMT(x) _SB_GETVALUE(x,S_SMB_AFMT,M_SMB_AFMT)
+
+#define K_SMB_AFMT_NONE 0
+#define K_SMB_AFMT_ADDR 1
+#define K_SMB_AFMT_ADDR_CMD1BYTE 2
+#define K_SMB_AFMT_ADDR_CMD2BYTE 3
+
+#define V_SMB_AFMT_NONE V_SMB_AFMT(K_SMB_AFMT_NONE)
+#define V_SMB_AFMT_ADDR V_SMB_AFMT(K_SMB_AFMT_ADDR)
+#define V_SMB_AFMT_ADDR_CMD1BYTE V_SMB_AFMT(K_SMB_AFMT_ADDR_CMD1BYTE)
+#define V_SMB_AFMT_ADDR_CMD2BYTE V_SMB_AFMT(K_SMB_AFMT_ADDR_CMD2BYTE)
+
+#define M_SMB_DIR _SB_MAKEMASK1(13)
+
+#endif /* 1250 PASS2 || 112x PASS1 || 1480 */
#endif
Index: lmo/include/asm-mips/sibyte/sb1250_uart.h
===================================================================
--- lmo.orig/include/asm-mips/sibyte/sb1250_uart.h 2005-10-19 22:34:08.000000000 -0700
+++ lmo/include/asm-mips/sibyte/sb1250_uart.h 2005-10-19 22:34:11.000000000 -0700
@@ -240,7 +240,12 @@
*/
#define M_DUART_ISR_TX_A _SB_MAKEMASK1(0)
-#define M_DUART_ISR_RX_A _SB_MAKEMASK1(1)
+
+#define S_DUART_ISR_RX_A 1
+#define M_DUART_ISR_RX_A _SB_MAKEMASK1(S_DUART_ISR_RX_A)
+#define V_DUART_ISR_RX_A(x) _SB_MAKEVALUE(x,S_DUART_ISR_RX_A)
+#define G_DUART_ISR_RX_A(x) _SB_GETVALUE(x,S_DUART_ISR_RX_A,M_DUART_ISR_RX_A)
+
#define M_DUART_ISR_BRK_A _SB_MAKEMASK1(2)
#define M_DUART_ISR_IN_A _SB_MAKEMASK1(3)
#define M_DUART_ISR_TX_B _SB_MAKEMASK1(4)
@@ -331,7 +336,7 @@
#define M_DUART_OUT_PIN_CLR(chan) \
(chan == 0 ? M_DUART_OUT_PIN_CLR0 : M_DUART_OUT_PIN_CLR1)
-#if SIBYTE_HDR_FEATURE(1250, PASS2) || SIBYTE_HDR_FEATURE(112x, PASS1)
+#if SIBYTE_HDR_FEATURE(1250, PASS2) || SIBYTE_HDR_FEATURE(112x, PASS1) || SIBYTE_HDR_FEATURE_CHIP(1480)
/*
* Full Interrupt Control Register
*/
@@ -345,7 +350,7 @@
#define M_DUART_INT_TIME _SB_MAKEMASK(4,S_DUART_INT_TIME)
#define V_DUART_INT_TIME(x) _SB_MAKEVALUE(x,S_DUART_INT_TIME)
#define G_DUART_INT_TIME(x) _SB_GETVALUE(x,S_DUART_INT_TIME,M_DUART_INT_TIME)
-#endif /* 1250 PASS2 || 112x PASS1 */
+#endif /* 1250 PASS2 || 112x PASS1 || 1480 */
/* ********************************************************************** */
Index: lmo/include/asm-mips/sibyte/sb1250_mc.h
===================================================================
--- lmo.orig/include/asm-mips/sibyte/sb1250_mc.h 2005-10-19 22:34:08.000000000 -0700
+++ lmo/include/asm-mips/sibyte/sb1250_mc.h 2005-10-19 22:34:11.000000000 -0700
@@ -324,6 +324,10 @@
#define K_MC_tRFC_DEFAULT 12
#define V_MC_tRFC_DEFAULT V_MC_tRFC(K_MC_tRFC_DEFAULT)
+#if SIBYTE_HDR_FEATURE(1250, PASS3)
+#define M_MC_tRFC_PLUS16 _SB_MAKEMASK1(51) /* 1250C3 and later. */
+#endif
+
#define S_MC_tCwCr 40
#define M_MC_tCwCr _SB_MAKEMASK(4,S_MC_tCwCr)
#define V_MC_tCwCr(x) _SB_MAKEVALUE(x,S_MC_tCwCr)
Index: lmo/include/asm-mips/sibyte/sb1250.h
===================================================================
--- lmo.orig/include/asm-mips/sibyte/sb1250.h 2005-10-19 22:34:08.000000000 -0700
+++ lmo/include/asm-mips/sibyte/sb1250.h 2005-10-19 22:34:11.000000000 -0700
@@ -27,6 +27,9 @@
#define SB1250_NR_IRQS 64
+#define BCM1480_NR_IRQS 128
+#define BCM1480_NR_IRQS_HALF 64
+
#define SB1250_DUART_MINOR_BASE 64
#ifndef __ASSEMBLY__
@@ -35,6 +38,7 @@
/* For revision/pass information */
#include <asm/sibyte/sb1250_scd.h>
+#include <asm/sibyte/bcm1480_scd.h>
extern unsigned int sb1_pass;
extern unsigned int soc_pass;
extern unsigned int soc_type;
@@ -46,6 +50,13 @@
extern void sb1250_mask_irq(int cpu, int irq);
extern void sb1250_unmask_irq(int cpu, int irq);
extern void sb1250_smp_finish(void);
+
+extern void bcm1480_time_init(void);
+extern unsigned long bcm1480_gettimeoffset(void);
+extern void bcm1480_mask_irq(int cpu, int irq);
+extern void bcm1480_unmask_irq(int cpu, int irq);
+extern void bcm1480_smp_finish(void);
+
extern void prom_printf(char *fmt, ...);
#define AT_spin \
^ permalink raw reply [flat|nested] 16+ messages in thread
* [PATCH 3/12] sibyte-header-cleanup
2005-10-20 6:53 [PATCH 0/12] bcm1480 support Andrew Isaacson
2005-10-20 6:54 ` [PATCH 1/12] sibyte-fixes Andrew Isaacson
2005-10-20 6:55 ` [PATCH 2/12] 1480-headers Andrew Isaacson
@ 2005-10-20 6:55 ` Andrew Isaacson
2005-10-20 6:56 ` [PATCH 4/12] sb1a-support Andrew Isaacson
` (8 subsequent siblings)
11 siblings, 0 replies; 16+ messages in thread
From: Andrew Isaacson @ 2005-10-20 6:55 UTC (permalink / raw)
To: linux-mips
Update sibyte headers to match Broadcom internal copies:
- comment cleanup and updates
- fix LittleSur part number to match the board silkscreen
Signed-Off-By: Andy Isaacson <adi@broadcom.com>
include/asm-mips/sibyte/sb1250_defs.h | 2 --
include/asm-mips/sibyte/sb1250_dma.h | 5 ++---
include/asm-mips/sibyte/sb1250_genbus.h | 5 ++---
include/asm-mips/sibyte/sb1250_int.h | 2 --
include/asm-mips/sibyte/sb1250_l2c.h | 2 --
include/asm-mips/sibyte/sb1250_ldt.h | 2 --
include/asm-mips/sibyte/sb1250_mac.h | 2 --
include/asm-mips/sibyte/sb1250_mc.h | 2 --
include/asm-mips/sibyte/sb1250_regs.h | 2 --
include/asm-mips/sibyte/sb1250_scd.h | 2 --
include/asm-mips/sibyte/sb1250_smbus.h | 5 ++---
include/asm-mips/sibyte/sb1250_syncser.h | 2 --
include/asm-mips/sibyte/sb1250_uart.h | 2 --
include/asm-mips/sibyte/swarm.h | 2 +-
14 files changed, 7 insertions(+), 30 deletions(-)
Index: lmo/include/asm-mips/sibyte/sb1250_defs.h
===================================================================
--- lmo.orig/include/asm-mips/sibyte/sb1250_defs.h 2005-10-19 22:34:11.000000000 -0700
+++ lmo/include/asm-mips/sibyte/sb1250_defs.h 2005-10-19 22:34:11.000000000 -0700
@@ -8,8 +8,6 @@
*
* SB1250 specification level: User's manual 1/02/02
*
- * Author: Mitch Lichtenberg
- *
*********************************************************************
*
* Copyright 2000,2001,2002,2003
Index: lmo/include/asm-mips/sibyte/sb1250_dma.h
===================================================================
--- lmo.orig/include/asm-mips/sibyte/sb1250_dma.h 2005-10-19 22:34:11.000000000 -0700
+++ lmo/include/asm-mips/sibyte/sb1250_dma.h 2005-10-19 22:34:11.000000000 -0700
@@ -7,9 +7,8 @@
* programming the SB1250's DMA controllers, both the data mover
* and the Ethernet DMA.
*
- * SB1250 specification level: User's manual 1/02/02
- *
- * Author: Mitch Lichtenberg
+ * SB1250 specification level: User's manual 10/21/02
+ * BCM1280 specification level: User's manual 11/24/03
*
*********************************************************************
*
Index: lmo/include/asm-mips/sibyte/sb1250_genbus.h
===================================================================
--- lmo.orig/include/asm-mips/sibyte/sb1250_genbus.h 2005-10-19 22:34:11.000000000 -0700
+++ lmo/include/asm-mips/sibyte/sb1250_genbus.h 2005-10-19 22:34:11.000000000 -0700
@@ -6,9 +6,8 @@
* This module contains constants and macros useful for
* manipulating the SB1250's Generic Bus interface
*
- * SB1250 specification level: User's manual 1/02/02
- *
- * Author: Mitch Lichtenberg
+ * SB1250 specification level: User's manual 10/21/02
+ * BCM1280 specification level: User's Manual 11/14/03
*
*********************************************************************
*
Index: lmo/include/asm-mips/sibyte/sb1250_int.h
===================================================================
--- lmo.orig/include/asm-mips/sibyte/sb1250_int.h 2005-10-19 22:34:11.000000000 -0700
+++ lmo/include/asm-mips/sibyte/sb1250_int.h 2005-10-19 22:34:11.000000000 -0700
@@ -8,8 +8,6 @@
*
* SB1250 specification level: User's manual 1/02/02
*
- * Author: Mitch Lichtenberg
- *
*********************************************************************
*
* Copyright 2000,2001,2002,2003
Index: lmo/include/asm-mips/sibyte/sb1250_l2c.h
===================================================================
--- lmo.orig/include/asm-mips/sibyte/sb1250_l2c.h 2005-10-19 22:34:11.000000000 -0700
+++ lmo/include/asm-mips/sibyte/sb1250_l2c.h 2005-10-19 22:34:11.000000000 -0700
@@ -8,8 +8,6 @@
*
* SB1250 specification level: User's manual 1/02/02
*
- * Author: Mitch Lichtenberg
- *
*********************************************************************
*
* Copyright 2000,2001,2002,2003
Index: lmo/include/asm-mips/sibyte/sb1250_ldt.h
===================================================================
--- lmo.orig/include/asm-mips/sibyte/sb1250_ldt.h 2005-10-19 22:34:08.000000000 -0700
+++ lmo/include/asm-mips/sibyte/sb1250_ldt.h 2005-10-19 22:34:11.000000000 -0700
@@ -8,8 +8,6 @@
*
* SB1250 specification level: User's manual 1/02/02
*
- * Author: Mitch Lichtenberg
- *
*********************************************************************
*
* Copyright 2000,2001,2002,2003
Index: lmo/include/asm-mips/sibyte/sb1250_mac.h
===================================================================
--- lmo.orig/include/asm-mips/sibyte/sb1250_mac.h 2005-10-19 22:34:11.000000000 -0700
+++ lmo/include/asm-mips/sibyte/sb1250_mac.h 2005-10-19 22:34:11.000000000 -0700
@@ -8,8 +8,6 @@
*
* SB1250 specification level: User's manual 1/02/02
*
- * Author: Mitch Lichtenberg
- *
*********************************************************************
*
* Copyright 2000,2001,2002,2003
Index: lmo/include/asm-mips/sibyte/sb1250_mc.h
===================================================================
--- lmo.orig/include/asm-mips/sibyte/sb1250_mc.h 2005-10-19 22:34:11.000000000 -0700
+++ lmo/include/asm-mips/sibyte/sb1250_mc.h 2005-10-19 22:34:11.000000000 -0700
@@ -8,8 +8,6 @@
*
* SB1250 specification level: User's manual 1/02/02
*
- * Author: Mitch Lichtenberg
- *
*********************************************************************
*
* Copyright 2000,2001,2002,2003
Index: lmo/include/asm-mips/sibyte/sb1250_regs.h
===================================================================
--- lmo.orig/include/asm-mips/sibyte/sb1250_regs.h 2005-10-19 22:34:11.000000000 -0700
+++ lmo/include/asm-mips/sibyte/sb1250_regs.h 2005-10-19 22:34:11.000000000 -0700
@@ -8,8 +8,6 @@
*
* SB1250 specification level: 01/02/2002
*
- * Author: Mitch Lichtenberg
- *
*********************************************************************
*
* Copyright 2000,2001,2002,2003
Index: lmo/include/asm-mips/sibyte/sb1250_scd.h
===================================================================
--- lmo.orig/include/asm-mips/sibyte/sb1250_scd.h 2005-10-19 22:34:11.000000000 -0700
+++ lmo/include/asm-mips/sibyte/sb1250_scd.h 2005-10-19 22:34:11.000000000 -0700
@@ -8,8 +8,6 @@
*
* SB1250 specification level: User's manual 1/02/02
*
- * Author: Mitch Lichtenberg
- *
*********************************************************************
*
* Copyright 2000,2001,2002,2003
Index: lmo/include/asm-mips/sibyte/sb1250_smbus.h
===================================================================
--- lmo.orig/include/asm-mips/sibyte/sb1250_smbus.h 2005-10-19 22:34:11.000000000 -0700
+++ lmo/include/asm-mips/sibyte/sb1250_smbus.h 2005-10-19 22:34:11.000000000 -0700
@@ -6,9 +6,8 @@
* This module contains constants and macros useful for
* manipulating the SB1250's SMbus devices.
*
- * SB1250 specification level: 01/02/2002
- *
- * Author: Mitch Lichtenberg
+ * SB1250 specification level: 10/21/02
+ * BCM1280 specification level: 11/24/03
*
*********************************************************************
*
Index: lmo/include/asm-mips/sibyte/sb1250_syncser.h
===================================================================
--- lmo.orig/include/asm-mips/sibyte/sb1250_syncser.h 2005-10-19 22:34:08.000000000 -0700
+++ lmo/include/asm-mips/sibyte/sb1250_syncser.h 2005-10-19 22:34:11.000000000 -0700
@@ -8,8 +8,6 @@
*
* SB1250 specification level: User's manual 1/02/02
*
- * Author: Mitch Lichtenberg
- *
*********************************************************************
*
* Copyright 2000,2001,2002,2003
Index: lmo/include/asm-mips/sibyte/sb1250_uart.h
===================================================================
--- lmo.orig/include/asm-mips/sibyte/sb1250_uart.h 2005-10-19 22:34:11.000000000 -0700
+++ lmo/include/asm-mips/sibyte/sb1250_uart.h 2005-10-19 22:34:11.000000000 -0700
@@ -8,8 +8,6 @@
*
* SB1250 specification level: User's manual 1/02/02
*
- * Author: Mitch Lichtenberg
- *
*********************************************************************
*
* Copyright 2000,2001,2002,2003
Index: lmo/include/asm-mips/sibyte/swarm.h
===================================================================
--- lmo.orig/include/asm-mips/sibyte/swarm.h 2005-10-19 22:34:08.000000000 -0700
+++ lmo/include/asm-mips/sibyte/swarm.h 2005-10-19 22:34:11.000000000 -0700
@@ -34,7 +34,7 @@
#define SIBYTE_DEFAULT_CONSOLE "ttyS0,115200"
#endif
#ifdef CONFIG_SIBYTE_LITTLESUR
-#define SIBYTE_BOARD_NAME "BCM1250C2 (LittleSur)"
+#define SIBYTE_BOARD_NAME "BCM91250C2 (LittleSur)"
#define SIBYTE_HAVE_PCMCIA 0
#define SIBYTE_HAVE_IDE 1
#define SIBYTE_DEFAULT_CONSOLE "cfe0"
^ permalink raw reply [flat|nested] 16+ messages in thread
* [PATCH 4/12] sb1a-support
2005-10-20 6:53 [PATCH 0/12] bcm1480 support Andrew Isaacson
` (2 preceding siblings ...)
2005-10-20 6:55 ` [PATCH 3/12] sibyte-header-cleanup Andrew Isaacson
@ 2005-10-20 6:56 ` Andrew Isaacson
2005-10-20 6:56 ` [PATCH 5/12] 1480-support Andrew Isaacson
` (7 subsequent siblings)
11 siblings, 0 replies; 16+ messages in thread
From: Andrew Isaacson @ 2005-10-20 6:56 UTC (permalink / raw)
To: linux-mips
Add support for SB-1A CPU.
Signed-Off-By: Andy Isaacson <adi@broadcom.com>
arch/mips/kernel/cpu-probe.c | 3 +++
arch/mips/kernel/proc.c | 1 +
arch/mips/mm/tlbex.c | 1 +
include/asm-mips/addrspace.h | 2 +-
include/asm-mips/cpu.h | 4 +++-
5 files changed, 9 insertions(+), 2 deletions(-)
Index: lmo/arch/mips/mm/tlbex.c
===================================================================
--- lmo.orig/arch/mips/mm/tlbex.c 2005-10-19 22:34:08.000000000 -0700
+++ lmo/arch/mips/mm/tlbex.c 2005-10-19 22:34:12.000000000 -0700
@@ -854,6 +854,7 @@
case CPU_R12000:
case CPU_4KC:
case CPU_SB1:
+ case CPU_SB1A:
case CPU_4KSC:
case CPU_20KC:
case CPU_25KF:
Index: lmo/arch/mips/kernel/cpu-probe.c
===================================================================
--- lmo.orig/arch/mips/kernel/cpu-probe.c 2005-10-19 22:34:10.000000000 -0700
+++ lmo/arch/mips/kernel/cpu-probe.c 2005-10-19 22:34:12.000000000 -0700
@@ -629,6 +629,9 @@
c->options &= ~(MIPS_CPU_FPU | MIPS_CPU_32FPR);
#endif
break;
+ case PRID_IMP_SB1A:
+ c->cputype = CPU_SB1A;
+ break;
}
}
Index: lmo/arch/mips/kernel/proc.c
===================================================================
--- lmo.orig/arch/mips/kernel/proc.c 2005-10-19 22:34:08.000000000 -0700
+++ lmo/arch/mips/kernel/proc.c 2005-10-19 22:34:12.000000000 -0700
@@ -56,6 +56,7 @@
[CPU_5KC] = "MIPS 5Kc",
[CPU_R4310] = "R4310",
[CPU_SB1] = "SiByte SB1",
+ [CPU_SB1A] = "SiByte SB1A",
[CPU_TX3912] = "TX3912",
[CPU_TX3922] = "TX3922",
[CPU_TX3927] = "TX3927",
Index: lmo/include/asm-mips/cpu.h
===================================================================
--- lmo.orig/include/asm-mips/cpu.h 2005-10-19 22:34:08.000000000 -0700
+++ lmo/include/asm-mips/cpu.h 2005-10-19 22:34:12.000000000 -0700
@@ -93,6 +93,7 @@
*/
#define PRID_IMP_SB1 0x0100
+#define PRID_IMP_SB1A 0x1100
/*
* These are the PRID's for when 23:16 == PRID_COMP_SANDCRAFT
@@ -194,7 +195,8 @@
#define CPU_AU1200 59
#define CPU_34K 60
#define CPU_PR4450 61
-#define CPU_LAST 61
+#define CPU_SB1A 62
+#define CPU_LAST 62
/*
* ISA Level encodings
Index: lmo/include/asm-mips/addrspace.h
===================================================================
--- lmo.orig/include/asm-mips/addrspace.h 2005-10-19 22:34:08.000000000 -0700
+++ lmo/include/asm-mips/addrspace.h 2005-10-19 22:34:12.000000000 -0700
@@ -162,7 +162,7 @@
#define TO_PHYS_MASK _LLCONST_(0x000000ffffffffff) /* 2^^40 - 1 */
#endif
-#if defined(CONFIG_CPU_SB1)
+#if defined(CONFIG_CPU_SB1) || defined(CONFIG_CPU_SB1A)
#define KUSIZE _LLCONST_(0x0000100000000000) /* 2^^44 */
#define KUSIZE_64 _LLCONST_(0x0000100000000000) /* 2^^44 */
#define K0SIZE _LLCONST_(0x0000100000000000) /* 2^^44 */
^ permalink raw reply [flat|nested] 16+ messages in thread
* [PATCH 5/12] 1480-support
2005-10-20 6:53 [PATCH 0/12] bcm1480 support Andrew Isaacson
` (3 preceding siblings ...)
2005-10-20 6:56 ` [PATCH 4/12] sb1a-support Andrew Isaacson
@ 2005-10-20 6:56 ` Andrew Isaacson
2005-10-20 6:57 ` [PATCH 6/12] bigsur-support Andrew Isaacson
` (6 subsequent siblings)
11 siblings, 0 replies; 16+ messages in thread
From: Andrew Isaacson @ 2005-10-20 6:56 UTC (permalink / raw)
To: linux-mips
Add support for BCM1480 family of chips.
- Kconfig and Makefile changes
- arch/mips/sibyte/bcm1480/
- changes to sibyte common code to support 1480
Signed-Off-By: Andy Isaacson <adi@broadcom.com>
arch/mips/Kconfig | 2
arch/mips/Makefile | 14
arch/mips/sibyte/Kconfig | 10
arch/mips/sibyte/bcm1480/Makefile | 5
arch/mips/sibyte/bcm1480/irq.c | 476 +++++++++++++++++++++++++++++++++
arch/mips/sibyte/bcm1480/irq_handler.S | 165 +++++++++++
arch/mips/sibyte/bcm1480/setup.c | 136 +++++++++
arch/mips/sibyte/bcm1480/smp.c | 110 +++++++
arch/mips/sibyte/bcm1480/time.c | 138 +++++++++
arch/mips/sibyte/cfe/smp.c | 14
arch/mips/sibyte/swarm/setup.c | 28 +
drivers/char/sb1250_duart.c | 90 ++++--
drivers/net/sb1250-mac.c | 109 ++++---
13 files changed, 1230 insertions(+), 67 deletions(-)
Index: lmo/arch/mips/Makefile
===================================================================
--- lmo.orig/arch/mips/Makefile 2005-10-19 22:34:07.000000000 -0700
+++ lmo/arch/mips/Makefile 2005-10-19 22:34:12.000000000 -0700
@@ -647,10 +647,20 @@
# removed (as happens, even if they have __initcall/module_init)
#
core-$(CONFIG_SIBYTE_BCM112X) += arch/mips/sibyte/sb1250/
-cflags-$(CONFIG_SIBYTE_BCM112X) += -Iinclude/asm-mips/mach-sibyte
+cflags-$(CONFIG_SIBYTE_BCM112X) += -Iinclude/asm-mips/mach-sibyte \
+ -DSIBYTE_HDR_FEATURES=SIBYTE_HDR_FMASK_1250_112x_ALL
core-$(CONFIG_SIBYTE_SB1250) += arch/mips/sibyte/sb1250/
-cflags-$(CONFIG_SIBYTE_SB1250) += -Iinclude/asm-mips/mach-sibyte
+cflags-$(CONFIG_SIBYTE_SB1250) += -Iinclude/asm-mips/mach-sibyte \
+ -DSIBYTE_HDR_FEATURES=SIBYTE_HDR_FMASK_1250_112x_ALL
+
+core-$(CONFIG_SIBYTE_BCM1x55) += arch/mips/sibyte/bcm1480/
+cflags-$(CONFIG_SIBYTE_BCM1x55) += -Iinclude/asm-mips/mach-sibyte \
+ -DSIBYTE_HDR_FEATURES=SIBYTE_HDR_FMASK_1480_ALL
+
+core-$(CONFIG_SIBYTE_BCM1x80) += arch/mips/sibyte/bcm1480/
+cflags-$(CONFIG_SIBYTE_BCM1x80) += -Iinclude/asm-mips/mach-sibyte \
+ -DSIBYTE_HDR_FEATURES=SIBYTE_HDR_FMASK_1480_ALL
#
# Sibyte BCM91120x (Carmel) board
Index: lmo/arch/mips/sibyte/bcm1480/Makefile
===================================================================
--- /dev/null 1970-01-01 00:00:00.000000000 +0000
+++ lmo/arch/mips/sibyte/bcm1480/Makefile 2005-10-19 22:34:12.000000000 -0700
@@ -0,0 +1,5 @@
+obj-y := setup.o irq.o irq_handler.o time.o
+
+obj-$(CONFIG_SMP) += smp.o
+
+EXTRA_AFLAGS := $(CFLAGS)
Index: lmo/arch/mips/sibyte/bcm1480/irq.c
===================================================================
--- /dev/null 1970-01-01 00:00:00.000000000 +0000
+++ lmo/arch/mips/sibyte/bcm1480/irq.c 2005-10-19 22:34:12.000000000 -0700
@@ -0,0 +1,476 @@
+/*
+ * Copyright (C) 2000,2001,2002,2003,2004 Broadcom Corporation
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version 2
+ * of the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
+ */
+#include <linux/config.h>
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/linkage.h>
+#include <linux/interrupt.h>
+#include <linux/spinlock.h>
+#include <linux/mm.h>
+#include <linux/slab.h>
+#include <linux/kernel_stat.h>
+
+#include <asm/errno.h>
+#include <asm/signal.h>
+#include <asm/system.h>
+#include <asm/ptrace.h>
+#include <asm/io.h>
+
+#include <asm/sibyte/bcm1480_regs.h>
+#include <asm/sibyte/bcm1480_int.h>
+#include <asm/sibyte/bcm1480_scd.h>
+
+#include <asm/sibyte/sb1250_uart.h>
+#include <asm/sibyte/sb1250.h>
+
+/*
+ * These are the routines that handle all the low level interrupt stuff.
+ * Actions handled here are: initialization of the interrupt map, requesting of
+ * interrupt lines by handlers, dispatching if interrupts to handlers, probing
+ * for interrupt lines
+ */
+
+
+#define shutdown_bcm1480_irq disable_bcm1480_irq
+static void end_bcm1480_irq(unsigned int irq);
+static void enable_bcm1480_irq(unsigned int irq);
+static void disable_bcm1480_irq(unsigned int irq);
+static unsigned int startup_bcm1480_irq(unsigned int irq);
+static void ack_bcm1480_irq(unsigned int irq);
+#ifdef CONFIG_SMP
+static void bcm1480_set_affinity(unsigned int irq, cpumask_t mask);
+#endif
+
+#ifdef CONFIG_PCI
+extern unsigned long ht_eoi_space;
+#endif
+
+#ifdef CONFIG_KGDB
+#include <asm/gdb-stub.h>
+extern void breakpoint(void);
+static int kgdb_irq;
+#ifdef CONFIG_GDB_CONSOLE
+extern void register_gdb_console(void);
+#endif
+
+/* kgdb is on when configured. Pass "nokgdb" kernel arg to turn it off */
+static int kgdb_flag = 1;
+static int __init nokgdb(char *str)
+{
+ kgdb_flag = 0;
+ return 1;
+}
+__setup("nokgdb", nokgdb);
+
+/* Default to UART1 */
+int kgdb_port = 1;
+#ifdef CONFIG_SIBYTE_SB1250_DUART
+extern char sb1250_duart_present[];
+#endif
+#endif
+
+static struct hw_interrupt_type bcm1480_irq_type = {
+ .typename = "BCM1480-IMR",
+ .startup = startup_bcm1480_irq,
+ .shutdown = shutdown_bcm1480_irq,
+ .enable = enable_bcm1480_irq,
+ .disable = disable_bcm1480_irq,
+ .ack = ack_bcm1480_irq,
+ .end = end_bcm1480_irq,
+#ifdef CONFIG_SMP
+ .set_affinity = bcm1480_set_affinity
+#endif
+};
+
+/* Store the CPU id (not the logical number) */
+int bcm1480_irq_owner[BCM1480_NR_IRQS];
+
+DEFINE_SPINLOCK(bcm1480_imr_lock);
+
+void bcm1480_mask_irq(int cpu, int irq)
+{
+ unsigned long flags;
+ u64 cur_ints,hl_spacing;
+
+ spin_lock_irqsave(&bcm1480_imr_lock, flags);
+ hl_spacing = 0;
+ if ((irq >= BCM1480_NR_IRQS_HALF) && (irq <= BCM1480_NR_IRQS)) {
+ hl_spacing = BCM1480_IMR_HL_SPACING;
+ irq -= BCM1480_NR_IRQS_HALF;
+ }
+ cur_ints = ____raw_readq(IOADDR(A_BCM1480_IMR_MAPPER(cpu) + R_BCM1480_IMR_INTERRUPT_MASK_H + hl_spacing));
+ cur_ints |= (((u64) 1) << irq);
+ ____raw_writeq(cur_ints, IOADDR(A_BCM1480_IMR_MAPPER(cpu) + R_BCM1480_IMR_INTERRUPT_MASK_H + hl_spacing));
+ spin_unlock_irqrestore(&bcm1480_imr_lock, flags);
+}
+
+void bcm1480_unmask_irq(int cpu, int irq)
+{
+ unsigned long flags;
+ u64 cur_ints,hl_spacing;
+
+ spin_lock_irqsave(&bcm1480_imr_lock, flags);
+ hl_spacing = 0;
+ if ((irq >= BCM1480_NR_IRQS_HALF) && (irq <= BCM1480_NR_IRQS)) {
+ hl_spacing = BCM1480_IMR_HL_SPACING;
+ irq -= BCM1480_NR_IRQS_HALF;
+ }
+ cur_ints = ____raw_readq(IOADDR(A_BCM1480_IMR_MAPPER(cpu) + R_BCM1480_IMR_INTERRUPT_MASK_H + hl_spacing));
+ cur_ints &= ~(((u64) 1) << irq);
+ ____raw_writeq(cur_ints, IOADDR(A_BCM1480_IMR_MAPPER(cpu) + R_BCM1480_IMR_INTERRUPT_MASK_H + hl_spacing));
+ spin_unlock_irqrestore(&bcm1480_imr_lock, flags);
+}
+
+#ifdef CONFIG_SMP
+static void bcm1480_set_affinity(unsigned int irq, cpumask_t mask)
+{
+ int i = 0, old_cpu, cpu, int_on;
+ u64 cur_ints;
+ irq_desc_t *desc = irq_desc + irq;
+ unsigned long flags;
+ unsigned int irq_dirty;
+
+ i = first_cpu(mask);
+ if (next_cpu(i, mask) <= NR_CPUS) {
+ printk("attempted to set irq affinity for irq %d to multiple CPUs\n", irq);
+ return;
+ }
+
+ /* Convert logical CPU to physical CPU */
+ cpu = cpu_logical_map(i);
+
+ /* Protect against other affinity changers and IMR manipulation */
+ spin_lock_irqsave(&desc->lock, flags);
+ spin_lock(&bcm1480_imr_lock);
+
+ /* Swizzle each CPU's IMR (but leave the IP selection alone) */
+ old_cpu = bcm1480_irq_owner[irq];
+ irq_dirty = irq;
+ if ((irq_dirty >= BCM1480_NR_IRQS_HALF) && (irq_dirty <= BCM1480_NR_IRQS)) {
+ irq_dirty -= BCM1480_NR_IRQS_HALF;
+ }
+
+ int k;
+ for (k=0; k<2; k++) { /* Loop through high and low interrupt mask register */
+ cur_ints = ____raw_readq(IOADDR(A_BCM1480_IMR_MAPPER(old_cpu) + R_BCM1480_IMR_INTERRUPT_MASK_H + (k*BCM1480_IMR_HL_SPACING)));
+ int_on = !(cur_ints & (((u64) 1) << irq_dirty));
+ if (int_on) {
+ /* If it was on, mask it */
+ cur_ints |= (((u64) 1) << irq_dirty);
+ ____raw_writeq(cur_ints, IOADDR(A_BCM1480_IMR_MAPPER(old_cpu) + R_BCM1480_IMR_INTERRUPT_MASK_H + (k*BCM1480_IMR_HL_SPACING)));
+ }
+ bcm1480_irq_owner[irq] = cpu;
+ if (int_on) {
+ /* unmask for the new CPU */
+ cur_ints = ____raw_readq(IOADDR(A_BCM1480_IMR_MAPPER(cpu) + R_BCM1480_IMR_INTERRUPT_MASK_H + (k*BCM1480_IMR_HL_SPACING)));
+ cur_ints &= ~(((u64) 1) << irq_dirty);
+ ____raw_writeq(cur_ints, IOADDR(A_BCM1480_IMR_MAPPER(cpu) + R_BCM1480_IMR_INTERRUPT_MASK_H + (k*BCM1480_IMR_HL_SPACING)));
+ }
+ }
+ spin_unlock(&bcm1480_imr_lock);
+ spin_unlock_irqrestore(&desc->lock, flags);
+}
+#endif
+
+
+/* Defined in arch/mips/sibyte/bcm1480/irq_handler.S */
+extern void bcm1480_irq_handler(void);
+
+/*****************************************************************************/
+
+static unsigned int startup_bcm1480_irq(unsigned int irq)
+{
+ bcm1480_unmask_irq(bcm1480_irq_owner[irq], irq);
+
+ return 0; /* never anything pending */
+}
+
+
+static void disable_bcm1480_irq(unsigned int irq)
+{
+ bcm1480_mask_irq(bcm1480_irq_owner[irq], irq);
+}
+
+static void enable_bcm1480_irq(unsigned int irq)
+{
+ bcm1480_unmask_irq(bcm1480_irq_owner[irq], irq);
+}
+
+
+static void ack_bcm1480_irq(unsigned int irq)
+{
+ u64 pending;
+ unsigned int irq_dirty;
+
+ /*
+ * If the interrupt was an HT interrupt, now is the time to
+ * clear it. NOTE: we assume the HT bridge was set up to
+ * deliver the interrupts to all CPUs (which makes affinity
+ * changing easier for us)
+ */
+ irq_dirty = irq;
+ if ((irq_dirty >= BCM1480_NR_IRQS_HALF) && (irq_dirty <= BCM1480_NR_IRQS)) {
+ irq_dirty -= BCM1480_NR_IRQS_HALF;
+ }
+ int k;
+ for (k=0; k<2; k++) { /* Loop through high and low LDT interrupts */
+ pending = __raw_readq(IOADDR(A_BCM1480_IMR_REGISTER(bcm1480_irq_owner[irq],
+ R_BCM1480_IMR_LDT_INTERRUPT_H + (k*BCM1480_IMR_HL_SPACING))));
+ pending &= ((u64)1 << (irq_dirty));
+ if (pending) {
+#ifdef CONFIG_SMP
+ int i;
+ for (i=0; i<NR_CPUS; i++) {
+ /*
+ * Clear for all CPUs so an affinity switch
+ * doesn't find an old status
+ */
+ __raw_writeq(pending, IOADDR(A_BCM1480_IMR_REGISTER(cpu_logical_map(i),
+ R_BCM1480_IMR_LDT_INTERRUPT_CLR_H + (k*BCM1480_IMR_HL_SPACING))));
+ }
+#else
+ __raw_writeq(pending, IOADDR(A_BCM1480_IMR_REGISTER(0, R_BCM1480_IMR_LDT_INTERRUPT_CLR_H + (k*BCM1480_IMR_HL_SPACING))));
+#endif
+
+ /*
+ * Generate EOI. For Pass 1 parts, EOI is a nop. For
+ * Pass 2, the LDT world may be edge-triggered, but
+ * this EOI shouldn't hurt. If they are
+ * level-sensitive, the EOI is required.
+ */
+#ifdef CONFIG_PCI
+ if (ht_eoi_space)
+ *(uint32_t *)(ht_eoi_space+(irq<<16)+(7<<2)) = 0;
+#endif
+ }
+ }
+ bcm1480_mask_irq(bcm1480_irq_owner[irq], irq);
+}
+
+
+static void end_bcm1480_irq(unsigned int irq)
+{
+ if (!(irq_desc[irq].status & (IRQ_DISABLED | IRQ_INPROGRESS))) {
+ bcm1480_unmask_irq(bcm1480_irq_owner[irq], irq);
+ }
+}
+
+
+void __init init_bcm1480_irqs(void)
+{
+ int i;
+
+ for (i = 0; i < NR_IRQS; i++) {
+ irq_desc[i].status = IRQ_DISABLED;
+ irq_desc[i].action = 0;
+ irq_desc[i].depth = 1;
+ if (i < BCM1480_NR_IRQS) {
+ irq_desc[i].handler = &bcm1480_irq_type;
+ bcm1480_irq_owner[i] = 0;
+ } else {
+ irq_desc[i].handler = &no_irq_type;
+ }
+ }
+}
+
+
+static irqreturn_t bcm1480_dummy_handler(int irq, void *dev_id,
+ struct pt_regs *regs)
+{
+ return IRQ_NONE;
+}
+
+static struct irqaction bcm1480_dummy_action = {
+ .handler = bcm1480_dummy_handler,
+ .flags = 0,
+ .mask = CPU_MASK_NONE,
+ .name = "bcm1480-private",
+ .next = NULL,
+ .dev_id = 0
+};
+
+int bcm1480_steal_irq(int irq)
+{
+ irq_desc_t *desc = irq_desc + irq;
+ unsigned long flags;
+ int retval = 0;
+
+ if (irq >= BCM1480_NR_IRQS)
+ return -EINVAL;
+
+ spin_lock_irqsave(&desc->lock,flags);
+ /* Don't allow sharing at all for these */
+ if (desc->action != NULL)
+ retval = -EBUSY;
+ else {
+ desc->action = &bcm1480_dummy_action;
+ desc->depth = 0;
+ }
+ spin_unlock_irqrestore(&desc->lock,flags);
+ return 0;
+}
+
+/*
+ * init_IRQ is called early in the boot sequence from init/main.c. It
+ * is responsible for setting up the interrupt mapper and installing the
+ * handler that will be responsible for dispatching interrupts to the
+ * "right" place.
+ */
+/*
+ * For now, map all interrupts to IP[2]. We could save
+ * some cycles by parceling out system interrupts to different
+ * IP lines, but keep it simple for bringup. We'll also direct
+ * all interrupts to a single CPU; we should probably route
+ * PCI and LDT to one cpu and everything else to the other
+ * to balance the load a bit.
+ *
+ * On the second cpu, everything is set to IP5, which is
+ * ignored, EXCEPT the mailbox interrupt. That one is
+ * set to IP[2] so it is handled. This is needed so we
+ * can do cross-cpu function calls, as requred by SMP
+ */
+
+#define IMR_IP2_VAL K_BCM1480_INT_MAP_I0
+#define IMR_IP3_VAL K_BCM1480_INT_MAP_I1
+#define IMR_IP4_VAL K_BCM1480_INT_MAP_I2
+#define IMR_IP5_VAL K_BCM1480_INT_MAP_I3
+#define IMR_IP6_VAL K_BCM1480_INT_MAP_I4
+
+void __init arch_init_irq(void)
+{
+
+ unsigned int i, cpu;
+ u64 tmp;
+ unsigned int imask = STATUSF_IP4 | STATUSF_IP3 | STATUSF_IP2 |
+ STATUSF_IP1 | STATUSF_IP0;
+
+ /* Default everything to IP2 */
+ /* Start with _high registers which has no bit 0 interrupt source */
+ for (i = 1; i < BCM1480_NR_IRQS_HALF; i++) { /* was I0 */
+ for (cpu = 0; cpu < 4; cpu++) {
+ __raw_writeq(IMR_IP2_VAL,
+ IOADDR(A_BCM1480_IMR_REGISTER(cpu,
+ R_BCM1480_IMR_INTERRUPT_MAP_BASE_H) + (i << 3)));
+ }
+ }
+
+ /* Now do _low registers */
+ for (i = 0; i < BCM1480_NR_IRQS_HALF; i++) {
+ for (cpu = 0; cpu < 4; cpu++) {
+ __raw_writeq(IMR_IP2_VAL,
+ IOADDR(A_BCM1480_IMR_REGISTER(cpu,
+ R_BCM1480_IMR_INTERRUPT_MAP_BASE_L) + (i << 3)));
+ }
+ }
+
+ init_bcm1480_irqs();
+
+ /*
+ * Map the high 16 bits of mailbox_0 registers to IP[3], for
+ * inter-cpu messages
+ */
+ /* Was I1 */
+ for (cpu = 0; cpu < 4; cpu++) {
+ __raw_writeq(IMR_IP3_VAL, IOADDR(A_BCM1480_IMR_REGISTER(cpu, R_BCM1480_IMR_INTERRUPT_MAP_BASE_H) +
+ (K_BCM1480_INT_MBOX_0_0 << 3)));
+ }
+
+
+ /* Clear the mailboxes. The firmware may leave them dirty */
+ for (cpu = 0; cpu < 4; cpu++) {
+ __raw_writeq(0xffffffffffffffffULL,
+ IOADDR(A_BCM1480_IMR_REGISTER(cpu, R_BCM1480_IMR_MAILBOX_0_CLR_CPU)));
+ __raw_writeq(0xffffffffffffffffULL,
+ IOADDR(A_BCM1480_IMR_REGISTER(cpu, R_BCM1480_IMR_MAILBOX_1_CLR_CPU)));
+ }
+
+
+ /* Mask everything except the high 16 bit of mailbox_0 registers for all cpus */
+ tmp = ~((u64) 0) ^ ( (((u64) 1) << K_BCM1480_INT_MBOX_0_0));
+ for (cpu = 0; cpu < 4; cpu++) {
+ __raw_writeq(tmp, IOADDR(A_BCM1480_IMR_REGISTER(cpu, R_BCM1480_IMR_INTERRUPT_MASK_H)));
+ }
+ tmp = ~((u64) 0);
+ for (cpu = 0; cpu < 4; cpu++) {
+ __raw_writeq(tmp, IOADDR(A_BCM1480_IMR_REGISTER(cpu, R_BCM1480_IMR_INTERRUPT_MASK_L)));
+ }
+
+ bcm1480_steal_irq(K_BCM1480_INT_MBOX_0_0);
+
+ /*
+ * Note that the timer interrupts are also mapped, but this is
+ * done in bcm1480_time_init(). Also, the profiling driver
+ * does its own management of IP7.
+ */
+
+#ifdef CONFIG_KGDB
+ imask |= STATUSF_IP6;
+#endif
+ /* Enable necessary IPs, disable the rest */
+ change_c0_status(ST0_IM, imask);
+ set_except_vector(0, bcm1480_irq_handler);
+
+#ifdef CONFIG_KGDB
+ if (kgdb_flag) {
+ kgdb_irq = K_BCM1480_INT_UART_0 + kgdb_port;
+
+#ifdef CONFIG_SIBYTE_SB1250_DUART
+ sb1250_duart_present[kgdb_port] = 0;
+#endif
+ /* Setup uart 1 settings, mapper */
+ /* QQQ FIXME */
+ __raw_writeq(M_DUART_IMR_BRK, IO_SPACE_BASE + A_DUART_IMRREG(kgdb_port));
+
+ bcm1480_steal_irq(kgdb_irq);
+ __raw_writeq(IMR_IP6_VAL,
+ IO_SPACE_BASE + A_BCM1480_IMR_REGISTER(0, R_BCM1480_IMR_INTERRUPT_MAP_BASE_H) +
+ (kgdb_irq<<3));
+ bcm1480_unmask_irq(0, kgdb_irq);
+
+#ifdef CONFIG_GDB_CONSOLE
+ register_gdb_console();
+#endif
+ prom_printf("Waiting for GDB on UART port %d\n", kgdb_port);
+ set_debug_traps();
+ breakpoint();
+ }
+#endif
+}
+
+#ifdef CONFIG_KGDB
+
+#include <linux/delay.h>
+
+#define duart_out(reg, val) csr_out32(val, IOADDR(A_DUART_CHANREG(kgdb_port,reg)))
+#define duart_in(reg) csr_in32(IOADDR(A_DUART_CHANREG(kgdb_port,reg)))
+
+void bcm1480_kgdb_interrupt(struct pt_regs *regs)
+{
+ /*
+ * Clear break-change status (allow some time for the remote
+ * host to stop the break, since we would see another
+ * interrupt on the end-of-break too)
+ */
+ kstat.irqs[smp_processor_id()][kgdb_irq]++;
+ mdelay(500);
+ duart_out(R_DUART_CMD, V_DUART_MISC_CMD_RESET_BREAK_INT |
+ M_DUART_RX_EN | M_DUART_TX_EN);
+ set_async_breakpoint(®s->cp0_epc);
+}
+
+#endif /* CONFIG_KGDB */
Index: lmo/arch/mips/sibyte/bcm1480/irq_handler.S
===================================================================
--- /dev/null 1970-01-01 00:00:00.000000000 +0000
+++ lmo/arch/mips/sibyte/bcm1480/irq_handler.S 2005-10-19 22:34:12.000000000 -0700
@@ -0,0 +1,165 @@
+/*
+ * Copyright (C) 2000,2001,2002,2003,2004 Broadcom Corporation
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version 2
+ * of the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
+ */
+
+/*
+ * bcm1480_irq_handler() is the routine that is actually called when an
+ * interrupt occurs. It is installed as the exception vector handler in
+ * init_IRQ() in arch/mips/sibyte/bcm1480/irq.c
+ *
+ * In the handle we figure out which interrupts need handling, and use that
+ * to call the dispatcher, which will take care of actually calling
+ * registered handlers
+ *
+ * Note that we take care of all raised interrupts in one go at the handler.
+ * This is more BSDish than the Indy code, and also, IMHO, more sane.
+ */
+#include <linux/config.h>
+
+#include <asm/addrspace.h>
+#include <asm/asm.h>
+#include <asm/mipsregs.h>
+#include <asm/regdef.h>
+#include <asm/stackframe.h>
+#include <asm/sibyte/sb1250_defs.h>
+#include <asm/sibyte/bcm1480_regs.h>
+#include <asm/sibyte/bcm1480_int.h>
+
+/*
+ * What a pain. We have to be really careful saving the upper 32 bits of any
+ * register across function calls if we don't want them trashed--since were
+ * running in -o32, the calling routing never saves the full 64 bits of a
+ * register across a function call. Being the interrupt handler, we're
+ * guaranteed that interrupts are disabled during this code so we don't have
+ * to worry about random interrupts blasting the high 32 bits.
+ */
+
+ .text
+ .set push
+ .set noreorder
+ .set noat
+ .set mips64
+ #.set mips4
+ .align 5
+ NESTED(bcm1480_irq_handler, PT_SIZE, sp)
+ SAVE_ALL
+ CLI
+
+#ifdef CONFIG_SIBYTE_BCM1480_PROF
+ /* Set compare to count to silence count/compare timer interrupts */
+ mfc0 t1, CP0_COUNT
+ mtc0 t1, CP0_COMPARE /* pause to clear IP[7] bit of cause ? */
+#endif
+ /* Read cause */
+ mfc0 s0, CP0_CAUSE
+
+#ifdef CONFIG_SIBYTE_BCM1480_PROF
+ /* Cpu performance counter interrupt is routed to IP[7] */
+ andi t1, s0, CAUSEF_IP7
+ beqz t1, 0f
+ srl t1, s0, (CAUSEB_BD-2) /* Shift BD bit to bit 2 */
+ and t1, t1, 0x4 /* mask to get just BD bit */
+#ifdef CONFIG_MIPS64
+ dmfc0 a0, CP0_EPC
+ daddu a0, a0, t1 /* a0 = EPC + (BD ? 4 : 0) */
+#else
+ mfc0 a0, CP0_EPC
+ addu a0, a0, t1 /* a0 = EPC + (BD ? 4 : 0) */
+#endif
+ jal sbprof_cpu_intr
+ nop
+ j ret_from_irq
+ nop
+0:
+#endif
+
+ /* Timer interrupt is routed to IP[4] */
+ andi t1, s0, CAUSEF_IP4
+ beqz t1, 1f
+ nop
+ jal bcm1480_timer_interrupt
+ move a0, sp /* Pass the registers along */
+ j ret_from_irq
+ nop /* delay slot */
+1:
+
+#ifdef CONFIG_SMP
+ /* Mailbox interrupt is routed to IP[3] */
+ andi t1, s0, CAUSEF_IP3
+ beqz t1, 2f
+ nop
+ jal bcm1480_mailbox_interrupt
+ move a0, sp
+ j ret_from_irq
+ nop /* delay slot */
+2:
+#endif
+
+#ifdef CONFIG_KGDB
+ /* KGDB (uart 1) interrupt is routed to IP[6] */
+ andi t1, s0, CAUSEF_IP6
+ beqz t1, 3f
+ nop /* delay slot */
+ jal bcm1480_kgdb_interrupt
+ move a0, sp
+ j ret_from_irq
+ nop /* delay slot */
+3:
+#endif
+
+ and t1, s0, CAUSEF_IP2
+ beqz t1, 9f
+ nop
+
+ /*
+ * Default...we've hit an IP[2] interrupt, which means we've got
+ * to check the 1480 interrupt registers to figure out what to do
+ * Need to detect which CPU we're on, now that smp_affinity is
+ * supported.
+ */
+ PTR_LA v0, CKSEG1 + A_BCM1480_IMR_CPU0_BASE
+#ifdef CONFIG_SMP
+ lw t1, TI_CPU($28)
+ sll t1, t1, BCM1480_IMR_REGISTER_SPACING_SHIFT
+ addu v0, v0, t1
+#endif
+
+ /* Read IP[2] status (get both high and low halves of status) */
+ ld s0, R_BCM1480_IMR_INTERRUPT_STATUS_BASE_H(v0)
+ ld s1, R_BCM1480_IMR_INTERRUPT_STATUS_BASE_L(v0)
+
+ move s2, zero /* intr number */
+ li s3, 64
+
+ beqz s0, 9f /* No interrupts. Return. */
+ move a1, sp
+
+ xori s4, s0, 1 /* if s0 (_H) == 1, it's a low intr, so... */
+ movz s2, s3, s4 /* start the intr number at 64, and */
+ movz s0, s1, s4 /* look at the low status value. */
+
+ dclz s1, s0 /* Find the next interrupt. */
+ dsubu a0, zero, s1
+ daddiu a0, a0, 63
+ jal do_IRQ
+ daddu a0, a0, s2
+
+9: j ret_from_irq
+ nop
+
+ .set pop
+ END(bcm1480_irq_handler)
Index: lmo/arch/mips/sibyte/bcm1480/setup.c
===================================================================
--- /dev/null 1970-01-01 00:00:00.000000000 +0000
+++ lmo/arch/mips/sibyte/bcm1480/setup.c 2005-10-19 22:34:12.000000000 -0700
@@ -0,0 +1,136 @@
+/*
+ * Copyright (C) 2000,2001,2002,2003,2004 Broadcom Corporation
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version 2
+ * of the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
+ */
+#include <linux/config.h>
+#include <linux/kernel.h>
+#include <linux/reboot.h>
+#include <linux/string.h>
+
+#include <asm/bootinfo.h>
+#include <asm/mipsregs.h>
+#include <asm/io.h>
+#include <asm/sibyte/sb1250.h>
+
+#include <asm/sibyte/bcm1480_regs.h>
+#include <asm/sibyte/bcm1480_scd.h>
+#include <asm/sibyte/sb1250_scd.h>
+
+unsigned int sb1_pass;
+unsigned int soc_pass;
+unsigned int soc_type;
+unsigned int periph_rev;
+unsigned int zbbus_mhz;
+
+static unsigned int part_type;
+
+static char *soc_str;
+static char *pass_str;
+
+static inline int setup_bcm1x80_bcm1x55(void);
+
+/* Setup code likely to be common to all SiByte platforms */
+
+static inline int sys_rev_decode(void)
+{
+ int ret = 0;
+
+ switch (soc_type) {
+ case K_SYS_SOC_TYPE_BCM1x80:
+ if (part_type == K_SYS_PART_BCM1480)
+ soc_str = "BCM1480";
+ else if (part_type == K_SYS_PART_BCM1280)
+ soc_str = "BCM1280";
+ else
+ soc_str = "BCM1x80";
+ ret = setup_bcm1x80_bcm1x55();
+ break;
+
+ case K_SYS_SOC_TYPE_BCM1x55:
+ if (part_type == K_SYS_PART_BCM1455)
+ soc_str = "BCM1455";
+ else if (part_type == K_SYS_PART_BCM1255)
+ soc_str = "BCM1255";
+ else
+ soc_str = "BCM1x55";
+ ret = setup_bcm1x80_bcm1x55();
+ break;
+
+ default:
+ prom_printf("Unknown part type %x\n", part_type);
+ ret = 1;
+ break;
+ }
+ return ret;
+}
+
+static inline int setup_bcm1x80_bcm1x55(void)
+{
+ int ret = 0;
+
+ switch (soc_pass) {
+ case K_SYS_REVISION_BCM1480_S0:
+ periph_rev = 1;
+ pass_str = "S0 (pass1)";
+ break;
+ case K_SYS_REVISION_BCM1480_A1:
+ periph_rev = 1;
+ pass_str = "A1 (pass1)";
+ break;
+ case K_SYS_REVISION_BCM1480_A2:
+ periph_rev = 1;
+ pass_str = "A2 (pass1)";
+ break;
+ case K_SYS_REVISION_BCM1480_A3:
+ periph_rev = 1;
+ pass_str = "A3 (pass1)";
+ break;
+ case K_SYS_REVISION_BCM1480_B0:
+ periph_rev = 1;
+ pass_str = "B0 (pass2)";
+ break;
+ default:
+ prom_printf("Unknown %s rev %x\n", soc_str, soc_pass);
+ periph_rev = 1;
+ pass_str = "Unknown Revision";
+ break;
+ }
+ return ret;
+}
+
+void bcm1480_setup(void)
+{
+ uint64_t sys_rev;
+ int plldiv;
+
+ sb1_pass = read_c0_prid() & 0xff;
+ sys_rev = __raw_readq(IOADDR(A_SCD_SYSTEM_REVISION));
+ soc_type = SYS_SOC_TYPE(sys_rev);
+ part_type = G_SYS_PART(sys_rev);
+ soc_pass = G_SYS_REVISION(sys_rev);
+
+ if (sys_rev_decode()) {
+ prom_printf("Restart after failure to identify SiByte chip\n");
+ machine_restart(NULL);
+ }
+
+ plldiv = G_BCM1480_SYS_PLL_DIV(__raw_readq(IOADDR(A_SCD_SYSTEM_CFG)));
+ zbbus_mhz = ((plldiv >> 1) * 50) + ((plldiv & 1) * 25);
+
+ prom_printf("Broadcom SiByte %s %s @ %d MHz (SB-1A rev %d)\n",
+ soc_str, pass_str, zbbus_mhz * 2, sb1_pass);
+ prom_printf("Board type: %s\n", get_system_type());
+}
Index: lmo/arch/mips/sibyte/bcm1480/smp.c
===================================================================
--- /dev/null 1970-01-01 00:00:00.000000000 +0000
+++ lmo/arch/mips/sibyte/bcm1480/smp.c 2005-10-19 22:34:12.000000000 -0700
@@ -0,0 +1,110 @@
+/*
+ * Copyright (C) 2001,2002,2004 Broadcom Corporation
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version 2
+ * of the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
+ */
+
+#include <linux/init.h>
+#include <linux/delay.h>
+#include <linux/smp.h>
+#include <linux/kernel_stat.h>
+
+#include <asm/mmu_context.h>
+#include <asm/io.h>
+#include <asm/sibyte/sb1250.h>
+#include <asm/sibyte/bcm1480_regs.h>
+#include <asm/sibyte/bcm1480_int.h>
+
+extern void smp_call_function_interrupt(void);
+
+/*
+ * These are routines for dealing with the bcm1480 smp capabilities
+ * independent of board/firmware
+ */
+
+static void *mailbox_0_set_regs[] = {
+ IOADDR(A_BCM1480_IMR_CPU0_BASE + R_BCM1480_IMR_MAILBOX_0_SET_CPU),
+ IOADDR(A_BCM1480_IMR_CPU1_BASE + R_BCM1480_IMR_MAILBOX_0_SET_CPU),
+ IOADDR(A_BCM1480_IMR_CPU2_BASE + R_BCM1480_IMR_MAILBOX_0_SET_CPU),
+ IOADDR(A_BCM1480_IMR_CPU3_BASE + R_BCM1480_IMR_MAILBOX_0_SET_CPU),
+};
+
+static void *mailbox_0_clear_regs[] = {
+ IOADDR(A_BCM1480_IMR_CPU0_BASE + R_BCM1480_IMR_MAILBOX_0_CLR_CPU),
+ IOADDR(A_BCM1480_IMR_CPU1_BASE + R_BCM1480_IMR_MAILBOX_0_CLR_CPU),
+ IOADDR(A_BCM1480_IMR_CPU2_BASE + R_BCM1480_IMR_MAILBOX_0_CLR_CPU),
+ IOADDR(A_BCM1480_IMR_CPU3_BASE + R_BCM1480_IMR_MAILBOX_0_CLR_CPU),
+};
+
+static void *mailbox_0_regs[] = {
+ IOADDR(A_BCM1480_IMR_CPU0_BASE + R_BCM1480_IMR_MAILBOX_0_CPU),
+ IOADDR(A_BCM1480_IMR_CPU1_BASE + R_BCM1480_IMR_MAILBOX_0_CPU),
+ IOADDR(A_BCM1480_IMR_CPU2_BASE + R_BCM1480_IMR_MAILBOX_0_CPU),
+ IOADDR(A_BCM1480_IMR_CPU3_BASE + R_BCM1480_IMR_MAILBOX_0_CPU),
+};
+
+/*
+ * SMP init and finish on secondary CPUs
+ */
+void bcm1480_smp_init(void)
+{
+ unsigned int imask = STATUSF_IP4 | STATUSF_IP3 | STATUSF_IP2 |
+ STATUSF_IP1 | STATUSF_IP0;
+
+ /* Set interrupt mask, but don't enable */
+ change_c0_status(ST0_IM, imask);
+}
+
+void bcm1480_smp_finish(void)
+{
+ extern void bcm1480_time_init(void);
+ bcm1480_time_init();
+ local_irq_enable();
+}
+
+/*
+ * These are routines for dealing with the sb1250 smp capabilities
+ * independent of board/firmware
+ */
+
+/*
+ * Simple enough; everything is set up, so just poke the appropriate mailbox
+ * register, and we should be set
+ */
+void core_send_ipi(int cpu, unsigned int action)
+{
+ __raw_writeq((((u64)action)<< 48), mailbox_0_set_regs[cpu]);
+}
+
+void bcm1480_mailbox_interrupt(struct pt_regs *regs)
+{
+ int cpu = smp_processor_id();
+ unsigned int action;
+
+ kstat_this_cpu.irqs[K_BCM1480_INT_MBOX_0_0]++;
+ /* Load the mailbox register to figure out what we're supposed to do */
+ action = (__raw_readq(mailbox_0_regs[cpu]) >> 48) & 0xffff;
+
+ /* Clear the mailbox to clear the interrupt */
+ __raw_writeq(((u64)action)<<48, mailbox_0_clear_regs[cpu]);
+
+ /*
+ * Nothing to do for SMP_RESCHEDULE_YOURSELF; returning from the
+ * interrupt will do the reschedule for us
+ */
+
+ if (action & SMP_CALL_FUNCTION)
+ smp_call_function_interrupt();
+}
Index: lmo/arch/mips/sibyte/bcm1480/time.c
===================================================================
--- /dev/null 1970-01-01 00:00:00.000000000 +0000
+++ lmo/arch/mips/sibyte/bcm1480/time.c 2005-10-19 22:34:12.000000000 -0700
@@ -0,0 +1,138 @@
+/*
+ * Copyright (C) 2000,2001,2004 Broadcom Corporation
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version 2
+ * of the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
+ */
+
+/*
+ * These are routines to set up and handle interrupts from the
+ * bcm1480 general purpose timer 0. We're using the timer as a
+ * system clock, so we set it up to run at 100 Hz. On every
+ * interrupt, we update our idea of what the time of day is,
+ * then call do_timer() in the architecture-independent kernel
+ * code to do general bookkeeping (e.g. update jiffies, run
+ * bottom halves, etc.)
+ */
+#include <linux/config.h>
+#include <linux/interrupt.h>
+#include <linux/sched.h>
+#include <linux/spinlock.h>
+#include <linux/kernel_stat.h>
+
+#include <asm/irq.h>
+#include <asm/ptrace.h>
+#include <asm/addrspace.h>
+#include <asm/time.h>
+#include <asm/io.h>
+
+#include <asm/sibyte/bcm1480_regs.h>
+#include <asm/sibyte/sb1250_regs.h>
+#include <asm/sibyte/bcm1480_int.h>
+#include <asm/sibyte/bcm1480_scd.h>
+
+#include <asm/sibyte/sb1250.h>
+
+
+#define IMR_IP2_VAL K_BCM1480_INT_MAP_I0
+#define IMR_IP3_VAL K_BCM1480_INT_MAP_I1
+#define IMR_IP4_VAL K_BCM1480_INT_MAP_I2
+
+extern int bcm1480_steal_irq(int irq);
+
+void bcm1480_time_init(void)
+{
+ int cpu = smp_processor_id();
+ int irq = K_BCM1480_INT_TIMER_0+cpu;
+
+ /* Only have 4 general purpose timers */
+ if (cpu > 3) {
+ BUG();
+ }
+
+ if (!cpu) {
+ /* Use our own gettimeoffset() routine */
+ do_gettimeoffset = bcm1480_gettimeoffset;
+ }
+
+ bcm1480_mask_irq(cpu, irq);
+
+ /* Map the timer interrupt to ip[4] of this cpu */
+ __raw_writeq(IMR_IP4_VAL, IOADDR(A_BCM1480_IMR_REGISTER(cpu, R_BCM1480_IMR_INTERRUPT_MAP_BASE_H)
+ + (irq<<3)));
+
+ /* the general purpose timer ticks at 1 Mhz independent of the rest of the system */
+ /* Disable the timer and set up the count */
+ __raw_writeq(0, IOADDR(A_SCD_TIMER_REGISTER(cpu, R_SCD_TIMER_CFG)));
+ __raw_writeq(
+#ifndef CONFIG_SIMULATION
+ 1000000/HZ
+#else
+ 50000/HZ
+#endif
+ , IOADDR(A_SCD_TIMER_REGISTER(cpu, R_SCD_TIMER_INIT)));
+
+ /* Set the timer running */
+ __raw_writeq(M_SCD_TIMER_ENABLE|M_SCD_TIMER_MODE_CONTINUOUS,
+ IOADDR(A_SCD_TIMER_REGISTER(cpu, R_SCD_TIMER_CFG)));
+
+ bcm1480_unmask_irq(cpu, irq);
+ bcm1480_steal_irq(irq);
+ /*
+ * This interrupt is "special" in that it doesn't use the request_irq
+ * way to hook the irq line. The timer interrupt is initialized early
+ * enough to make this a major pain, and it's also firing enough to
+ * warrant a bit of special case code. bcm1480_timer_interrupt is
+ * called directly from irq_handler.S when IP[4] is set during an
+ * interrupt
+ */
+}
+
+#include <asm/sibyte/sb1250.h>
+
+void bcm1480_timer_interrupt(struct pt_regs *regs)
+{
+ int cpu = smp_processor_id();
+ int irq = K_BCM1480_INT_TIMER_0+cpu;
+
+ /* Reset the timer */
+ __raw_writeq(M_SCD_TIMER_ENABLE|M_SCD_TIMER_MODE_CONTINUOUS,
+ IOADDR(A_SCD_TIMER_REGISTER(cpu, R_SCD_TIMER_CFG)));
+
+ /*
+ * CPU 0 handles the global timer interrupt job
+ */
+ if (cpu == 0) {
+ ll_timer_interrupt(irq, regs);
+ }
+
+ /*
+ * every CPU should do profiling and process accouting
+ */
+ ll_local_timer_interrupt(irq, regs);
+}
+
+/*
+ * We use our own do_gettimeoffset() instead of the generic one,
+ * because the generic one does not work for SMP case.
+ * In addition, since we use general timer 0 for system time,
+ * we can get accurate intra-jiffy offset without calibration.
+ */
+unsigned long bcm1480_gettimeoffset(void)
+{
+ unsigned long count =
+ __raw_readq(IOADDR(A_SCD_TIMER_REGISTER(0, R_SCD_TIMER_CNT)));
+
+ return 1000000/HZ - count;
+}
Index: lmo/arch/mips/sibyte/cfe/smp.c
===================================================================
--- lmo.orig/arch/mips/sibyte/cfe/smp.c 2005-10-19 22:34:07.000000000 -0700
+++ lmo/arch/mips/sibyte/cfe/smp.c 2005-10-19 22:34:12.000000000 -0700
@@ -70,8 +70,15 @@
*/
void prom_init_secondary(void)
{
+#if defined(CONFIG_SIBYTE_BCM1x55) || defined(CONFIG_SIBYTE_BCM1x80)
+ extern void bcm1480_smp_init(void);
+ bcm1480_smp_init();
+#elif defined(CONFIG_SIBYTE_SB1250)
extern void sb1250_smp_init(void);
sb1250_smp_init();
+#else
+#error invalid SMP configuration
+#endif
}
/*
@@ -80,8 +87,15 @@
*/
void prom_smp_finish(void)
{
+#if defined(CONFIG_SIBYTE_BCM1x55) || defined(CONFIG_SIBYTE_BCM1x80)
+ extern void bcm1480_smp_finish(void);
+ bcm1480_smp_finish();
+#elif defined(CONFIG_SIBYTE_SB1250)
extern void sb1250_smp_finish(void);
sb1250_smp_finish();
+#else
+#error invalid SMP configuration
+#endif
}
/*
Index: lmo/arch/mips/sibyte/swarm/setup.c
===================================================================
--- lmo.orig/arch/mips/sibyte/swarm/setup.c 2005-10-19 22:34:07.000000000 -0700
+++ lmo/arch/mips/sibyte/swarm/setup.c 2005-10-19 22:34:12.000000000 -0700
@@ -1,5 +1,5 @@
/*
- * Copyright (C) 2000, 2001, 2002, 2003 Broadcom Corporation
+ * Copyright (C) 2000, 2001, 2002, 2003, 2004 Broadcom Corporation
* Copyright (C) 2004 by Ralf Baechle (ralf@linux-mips.org)
*
* This program is free software; you can redistribute it and/or
@@ -39,11 +39,23 @@
#include <asm/time.h>
#include <asm/traps.h>
#include <asm/sibyte/sb1250.h>
+#if defined(CONFIG_SIBYTE_BCM1x55) || defined(CONFIG_SIBYTE_BCM1x80)
+#include <asm/sibyte/bcm1480_regs.h>
+#elif defined(CONFIG_SIBYTE_SB1250) || defined(CONFIG_SIBYTE_BCM112X)
#include <asm/sibyte/sb1250_regs.h>
+#else
+#error invalid SiByte board configuation
+#endif
#include <asm/sibyte/sb1250_genbus.h>
#include <asm/sibyte/board.h>
+#if defined(CONFIG_SIBYTE_BCM1x55) || defined(CONFIG_SIBYTE_BCM1x80)
+extern void bcm1480_setup(void);
+#elif defined(CONFIG_SIBYTE_SB1250) || defined(CONFIG_SIBYTE_BCM112X)
extern void sb1250_setup(void);
+#else
+#error invalid SiByte board configuation
+#endif
extern int xicor_probe(void);
extern int xicor_set_time(unsigned long);
@@ -66,7 +78,13 @@
*/
/* We only need to setup the generic timer */
- sb1250_time_init();
+#if defined(CONFIG_SIBYTE_BCM1x55) || defined(CONFIG_SIBYTE_BCM1x80)
+ bcm1480_time_init();
+#elif defined(CONFIG_SIBYTE_SB1250) || defined(CONFIG_SIBYTE_BCM112X)
+ sb1250_time_init();
+#else
+#error invalid SiByte board configuation
+#endif
}
int swarm_be_handler(struct pt_regs *regs, int is_fixup)
@@ -81,7 +99,13 @@
void __init plat_setup(void)
{
+#if defined(CONFIG_SIBYTE_BCM1x55) || defined(CONFIG_SIBYTE_BCM1x80)
+ bcm1480_setup();
+#elif defined(CONFIG_SIBYTE_SB1250) || defined(CONFIG_SIBYTE_BCM112X)
sb1250_setup();
+#else
+#error invalid SiByte board configuation
+#endif
panic_timeout = 5; /* For debug. */
Index: lmo/drivers/char/sb1250_duart.c
===================================================================
--- lmo.orig/drivers/char/sb1250_duart.c 2005-10-19 22:34:07.000000000 -0700
+++ lmo/drivers/char/sb1250_duart.c 2005-10-19 22:34:12.000000000 -0700
@@ -1,5 +1,5 @@
/*
- * Copyright (C) 2000, 2001, 2002, 2003 Broadcom Corporation
+ * Copyright (C) 2000,2001,2002,2003,2004 Broadcom Corporation
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License
@@ -44,12 +44,31 @@
#include <asm/io.h>
#include <asm/uaccess.h>
#include <asm/sibyte/swarm.h>
+#include <asm/sibyte/sb1250.h>
+#if defined(CONFIG_SIBYTE_BCM1x55) || defined(CONFIG_SIBYTE_BCM1x80)
+#include <asm/sibyte/bcm1480_regs.h>
+#include <asm/sibyte/bcm1480_int.h>
+#elif defined(CONFIG_SIBYTE_SB1250) || defined(CONFIG_SIBYTE_BCM112X)
#include <asm/sibyte/sb1250_regs.h>
-#include <asm/sibyte/sb1250_uart.h>
#include <asm/sibyte/sb1250_int.h>
-#include <asm/sibyte/sb1250.h>
+#else
+#error invalid SiByte UART configuation
+#endif
+#include <asm/sibyte/sb1250_uart.h>
#include <asm/war.h>
+#if defined(CONFIG_SIBYTE_BCM1x55) || defined(CONFIG_SIBYTE_BCM1x80)
+#define UNIT_CHANREG(n,reg) A_BCM1480_DUART_CHANREG((n),(reg))
+#define UNIT_IMRREG(n) A_BCM1480_DUART_IMRREG(n)
+#define UNIT_INT(n) (K_BCM1480_INT_UART_0 + (n))
+#elif defined(CONFIG_SIBYTE_SB1250) || defined(CONFIG_SIBYTE_BCM112X)
+#define UNIT_CHANREG(n,reg) A_DUART_CHANREG((n),(reg))
+#define UNIT_IMRREG(n) A_DUART_IMRREG(n)
+#define UNIT_INT(n) (K_INT_UART_0 + (n))
+#else
+#error invalid SiByte UART configuation
+#endif
+
/* Toggle spewing of debugging output */
#undef DEBUG
@@ -58,8 +77,8 @@
#define TX_INTEN 1
#define DUART_INITIALIZED 2
-#define DUART_MAX_LINE 2
-char sb1250_duart_present[DUART_MAX_LINE] = {1,1};
+#define DUART_MAX_LINE 4
+char sb1250_duart_present[DUART_MAX_LINE];
EXPORT_SYMBOL(sb1250_duart_present);
/*
@@ -132,16 +151,14 @@
{
if (!(port->flags & DUART_INITIALIZED)) {
port->line = line;
- port->status = IOADDR(A_DUART_CHANREG(line, R_DUART_STATUS));
- port->imr = IOADDR(A_DUART_IMRREG(line));
- port->tx_hold = IOADDR(A_DUART_CHANREG(line, R_DUART_TX_HOLD));
- port->rx_hold = IOADDR(A_DUART_CHANREG(line, R_DUART_RX_HOLD));
- port->mode_1 = IOADDR(A_DUART_CHANREG(line,
- R_DUART_MODE_REG_1));
- port->mode_2 = IOADDR(A_DUART_CHANREG(line,
- R_DUART_MODE_REG_2));
- port->clk_sel = IOADDR(A_DUART_CHANREG(line, R_DUART_CLK_SEL));
- port->cmd = IOADDR(A_DUART_CHANREG(line, R_DUART_CMD));
+ port->status = IOADDR(UNIT_CHANREG(line, R_DUART_STATUS));
+ port->imr = IOADDR(UNIT_IMRREG(line));
+ port->tx_hold = IOADDR(UNIT_CHANREG(line, R_DUART_TX_HOLD));
+ port->rx_hold = IOADDR(UNIT_CHANREG(line, R_DUART_RX_HOLD));
+ port->mode_1 = IOADDR(UNIT_CHANREG(line, R_DUART_MODE_REG_1));
+ port->mode_2 = IOADDR(UNIT_CHANREG(line, R_DUART_MODE_REG_2));
+ port->clk_sel = IOADDR(UNIT_CHANREG(line, R_DUART_CLK_SEL));
+ port->cmd = IOADDR(UNIT_CHANREG(line, R_DUART_CMD));
port->flags |= DUART_INITIALIZED;
}
}
@@ -484,8 +501,8 @@
tmp.type=PORT_SB1250;
tmp.line=us->line;
- tmp.port=A_DUART_CHANREG(tmp.line,0);
- tmp.irq=K_INT_UART_0 + tmp.line;
+ tmp.port=UNIT_CHANREG(tmp.line,0);
+ tmp.irq=UNIT_INT(tmp.line);
tmp.xmit_fifo_size=16; /* fixed by hw */
tmp.baud_base=5000000;
tmp.io_type=SERIAL_IO_MEM;
@@ -713,12 +730,37 @@
.wait_until_sent = duart_wait_until_sent,
};
-/* Set up the driver and register it, register the 2 1250 UART interrupts. This
+/* Initialize the sb1250_duart_present array based on SOC type. */
+static void __init sb1250_duart_init_present_lines(void)
+{
+ int i, max_lines;
+
+ /* Set the number of available units based on the SOC type. */
+ switch (soc_type) {
+ case K_SYS_SOC_TYPE_BCM1x55:
+ case K_SYS_SOC_TYPE_BCM1x80:
+ max_lines = 4;
+ break;
+ default:
+ /* Assume at least two serial ports at the normal address. */
+ max_lines = 2;
+ break;
+ }
+ if (max_lines > DUART_MAX_LINE)
+ max_lines = DUART_MAX_LINE;
+
+ for (i = 0; i < max_lines; i++)
+ sb1250_duart_present[i] = 1;
+}
+
+/* Set up the driver and register it, register the UART interrupts. This
is called from tty_init, or as a part of the module init */
static int __init sb1250_duart_init(void)
{
int i;
+ sb1250_duart_init_present_lines();
+
sb1250_duart_driver = alloc_tty_driver(DUART_MAX_LINE);
if (!sb1250_duart_driver)
return -ENOMEM;
@@ -743,11 +785,11 @@
init_duart_port(port, i);
spin_lock_init(&port->outp_lock);
duart_mask_ints(i, M_DUART_IMR_ALL);
- if (request_irq(K_INT_UART_0+i, duart_int, 0, "uart", port)) {
+ if (request_irq(UNIT_INT(i), duart_int, 0, "uart", port)) {
panic("Couldn't get uart0 interrupt line");
}
__raw_writeq(M_DUART_RX_EN|M_DUART_TX_EN,
- IOADDR(A_DUART_CHANREG(i, R_DUART_CMD)));
+ IOADDR(UNIT_CHANREG(i, R_DUART_CMD)));
duart_set_cflag(i, DEFAULT_CFLAGS);
}
@@ -774,8 +816,8 @@
for (i=0; i<DUART_MAX_LINE; i++) {
if (!sb1250_duart_present[i])
continue;
- free_irq(K_INT_UART_0+i, &uart_states[i]);
- disable_irq(K_INT_UART_0+i);
+ free_irq(UNIT_INT(i), &uart_states[i]);
+ disable_irq(UNIT_INT(i));
}
local_irq_restore(flags);
}
@@ -783,7 +825,7 @@
module_init(sb1250_duart_init);
module_exit(sb1250_duart_fini);
MODULE_DESCRIPTION("SB1250 Duart serial driver");
-MODULE_AUTHOR("Justin Carlson, Broadcom Corp.");
+MODULE_AUTHOR("Broadcom Corp.");
#ifdef CONFIG_SIBYTE_SB1250_DUART_CONSOLE
@@ -829,6 +871,8 @@
{
int i;
+ sb1250_duart_init_present_lines();
+
for (i=0; i<DUART_MAX_LINE; i++) {
uart_state_t *port = uart_states + i;
Index: lmo/drivers/net/sb1250-mac.c
===================================================================
--- lmo.orig/drivers/net/sb1250-mac.c 2005-10-19 22:34:07.000000000 -0700
+++ lmo/drivers/net/sb1250-mac.c 2005-10-19 22:34:12.000000000 -0700
@@ -1,5 +1,5 @@
/*
- * Copyright (C) 2001,2002,2003 Broadcom Corporation
+ * Copyright (C) 2001,2002,2003,2004 Broadcom Corporation
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License
@@ -43,6 +43,7 @@
#define SBMAC_ETH0_HWADDR "40:00:00:00:01:00"
#define SBMAC_ETH1_HWADDR "40:00:00:00:01:01"
#define SBMAC_ETH2_HWADDR "40:00:00:00:01:02"
+#define SBMAC_ETH3_HWADDR "40:00:00:00:01:03"
#endif
@@ -57,7 +58,7 @@
#define CONFIG_SBMAC_COALESCE
-#define MAX_UNITS 3 /* More are supported, limit only on options */
+#define MAX_UNITS 4 /* More are supported, limit only on options */
/* Time in jiffies before concluding the transmitter is hung. */
#define TX_TIMEOUT (2*HZ)
@@ -85,11 +86,11 @@
The media type is usually passed in 'options[]'.
*/
#ifdef MODULE
-static int options[MAX_UNITS] = {-1, -1, -1};
+static int options[MAX_UNITS] = {-1, -1, -1, -1};
module_param_array(options, int, NULL, S_IRUGO);
MODULE_PARM_DESC(options, "1-" __MODULE_STRING(MAX_UNITS));
-static int full_duplex[MAX_UNITS] = {-1, -1, -1};
+static int full_duplex[MAX_UNITS] = {-1, -1, -1, -1};
module_param_array(full_duplex, int, NULL, S_IRUGO);
MODULE_PARM_DESC(full_duplex, "1-" __MODULE_STRING(MAX_UNITS));
#endif
@@ -105,13 +106,26 @@
#endif
#include <asm/sibyte/sb1250.h>
-#include <asm/sibyte/sb1250_defs.h>
+#if defined(CONFIG_SIBYTE_BCM1x55) || defined(CONFIG_SIBYTE_BCM1x80)
+#include <asm/sibyte/bcm1480_regs.h>
+#include <asm/sibyte/bcm1480_int.h>
+#elif defined(CONFIG_SIBYTE_SB1250) || defined(CONFIG_SIBYTE_BCM112X)
#include <asm/sibyte/sb1250_regs.h>
-#include <asm/sibyte/sb1250_mac.h>
-#include <asm/sibyte/sb1250_dma.h>
#include <asm/sibyte/sb1250_int.h>
+#else
+#error invalid SiByte MAC configuation
+#endif
#include <asm/sibyte/sb1250_scd.h>
+#include <asm/sibyte/sb1250_mac.h>
+#include <asm/sibyte/sb1250_dma.h>
+#if defined(CONFIG_SIBYTE_BCM1x55) || defined(CONFIG_SIBYTE_BCM1x80)
+#define UNIT_INT(n) (K_BCM1480_INT_MAC_0 + ((n) * 2))
+#elif defined(CONFIG_SIBYTE_SB1250) || defined(CONFIG_SIBYTE_BCM112X)
+#define UNIT_INT(n) (K_INT_MAC_0 + (n))
+#else
+#error invalid SiByte MAC configuation
+#endif
/**********************************************************************
* Simple types
@@ -1476,10 +1490,10 @@
* and make sure that RD_THRSH + WR_THRSH <=128 for pass2 and above
* Use a larger RD_THRSH for gigabit
*/
- if (periph_rev >= 2)
- th_value = 64;
- else
+ if (soc_type == K_SYS_SOC_TYPE_BCM1250 && periph_rev < 2)
th_value = 28;
+ else
+ th_value = 64;
fifo = V_MAC_TX_WR_THRSH(4) | /* Must be '4' or '8' */
((s->sbm_speed == sbmac_speed_1000)
@@ -1589,13 +1603,17 @@
* Turn on the rest of the bits in the enable register
*/
+#if defined(CONFIG_SIBYTE_BCM1x55) || defined(CONFIG_SIBYTE_BCM1x80)
+ __raw_writeq(M_MAC_RXDMA_EN0 |
+ M_MAC_TXDMA_EN0, s->sbm_macenable);
+#elif defined(CONFIG_SIBYTE_SB1250) || defined(CONFIG_SIBYTE_BCM112X)
__raw_writeq(M_MAC_RXDMA_EN0 |
M_MAC_TXDMA_EN0 |
M_MAC_RX_ENABLE |
M_MAC_TX_ENABLE, s->sbm_macenable);
-
-
-
+#else
+#error invalid SiByte MAC configuation
+#endif
#ifdef CONFIG_SBMAC_COALESCE
/*
@@ -1786,11 +1804,12 @@
reg &= ~M_MAC_IPHDR_OFFSET | V_MAC_IPHDR_OFFSET(15);
__raw_writeq(reg, sc->sbm_rxfilter);
- /* read system identification to determine revision */
- if (periph_rev >= 2) {
- sc->rx_hw_checksum = ENABLE;
- } else {
+ /* BCM1250 pass1 didn't have hardware checksum. Everything
+ later does. */
+ if (soc_type == K_SYS_SOC_TYPE_BCM1250 && periph_rev < 2) {
sc->rx_hw_checksum = DISABLE;
+ } else {
+ sc->rx_hw_checksum = ENABLE;
}
}
@@ -2220,7 +2239,7 @@
-#if defined(SBMAC_ETH0_HWADDR) || defined(SBMAC_ETH1_HWADDR) || defined(SBMAC_ETH2_HWADDR)
+#if defined(SBMAC_ETH0_HWADDR) || defined(SBMAC_ETH1_HWADDR) || defined(SBMAC_ETH2_HWADDR) || defined(SBMAC_ETH3_HWADDR)
/**********************************************************************
* SBMAC_PARSE_XDIGIT(str)
*
@@ -2765,7 +2784,7 @@
-#if defined(SBMAC_ETH0_HWADDR) || defined(SBMAC_ETH1_HWADDR) || defined(SBMAC_ETH2_HWADDR)
+#if defined(SBMAC_ETH0_HWADDR) || defined(SBMAC_ETH1_HWADDR) || defined(SBMAC_ETH2_HWADDR) || defined(SBMAC_ETH3_HWADDR)
static void
sbmac_setup_hwaddr(int chan,char *addr)
{
@@ -2791,25 +2810,7 @@
unsigned long port;
int chip_max_units;
- /*
- * For bringup when not using the firmware, we can pre-fill
- * the MAC addresses using the environment variables
- * specified in this file (or maybe from the config file?)
- */
-#ifdef SBMAC_ETH0_HWADDR
- sbmac_setup_hwaddr(0,SBMAC_ETH0_HWADDR);
-#endif
-#ifdef SBMAC_ETH1_HWADDR
- sbmac_setup_hwaddr(1,SBMAC_ETH1_HWADDR);
-#endif
-#ifdef SBMAC_ETH2_HWADDR
- sbmac_setup_hwaddr(2,SBMAC_ETH2_HWADDR);
-#endif
-
- /*
- * Walk through the Ethernet controllers and find
- * those who have their MAC addresses set.
- */
+ /* Set the number of available units based on the SOC type. */
switch (soc_type) {
case K_SYS_SOC_TYPE_BCM1250:
case K_SYS_SOC_TYPE_BCM1250_ALT:
@@ -2821,6 +2822,10 @@
case K_SYS_SOC_TYPE_BCM1250_ALT2: /* Hybrid */
chip_max_units = 2;
break;
+ case K_SYS_SOC_TYPE_BCM1x55:
+ case K_SYS_SOC_TYPE_BCM1x80:
+ chip_max_units = 4;
+ break;
default:
chip_max_units = 0;
break;
@@ -2828,6 +2833,32 @@
if (chip_max_units > MAX_UNITS)
chip_max_units = MAX_UNITS;
+ /*
+ * For bringup when not using the firmware, we can pre-fill
+ * the MAC addresses using the environment variables
+ * specified in this file (or maybe from the config file?)
+ */
+#ifdef SBMAC_ETH0_HWADDR
+ if (chip_max_units > 0)
+ sbmac_setup_hwaddr(0,SBMAC_ETH0_HWADDR);
+#endif
+#ifdef SBMAC_ETH1_HWADDR
+ if (chip_max_units > 1)
+ sbmac_setup_hwaddr(1,SBMAC_ETH1_HWADDR);
+#endif
+#ifdef SBMAC_ETH2_HWADDR
+ if (chip_max_units > 2)
+ sbmac_setup_hwaddr(2,SBMAC_ETH2_HWADDR);
+#endif
+#ifdef SBMAC_ETH3_HWADDR
+ if (chip_max_units > 3)
+ sbmac_setup_hwaddr(3,SBMAC_ETH3_HWADDR);
+#endif
+
+ /*
+ * Walk through the Ethernet controllers and find
+ * those who have their MAC addresses set.
+ */
for (idx = 0; idx < chip_max_units; idx++) {
/*
@@ -2859,7 +2890,7 @@
printk(KERN_DEBUG "sbmac: configuring MAC at %lx\n", port);
- dev->irq = K_INT_MAC_0 + idx;
+ dev->irq = UNIT_INT(idx);
dev->base_addr = port;
dev->mem_end = 0;
if (sbmac_init(dev, idx)) {
Index: lmo/arch/mips/Kconfig
===================================================================
--- lmo.orig/arch/mips/Kconfig 2005-10-19 22:34:07.000000000 -0700
+++ lmo/arch/mips/Kconfig 2005-10-19 22:34:12.000000000 -0700
@@ -1430,7 +1430,7 @@
config SMP
bool "Multi-Processing support"
- depends on CPU_RM9000 || (SIBYTE_SB1250 && !SIBYTE_STANDALONE) || SGI_IP27 || MIPS_MT_SMP
+ depends on CPU_RM9000 || ((SIBYTE_BCM1x80 || SIBYTE_BCM1x55 || SIBYTE_SB1250) && !SIBYTE_STANDALONE) || SGI_IP27 || MIPS_MT_SMP
---help---
This enables support for systems with more than one CPU. If you have
a system with only one CPU, like most personal computers, say N. If
Index: lmo/arch/mips/sibyte/Kconfig
===================================================================
--- lmo.orig/arch/mips/sibyte/Kconfig 2005-10-19 22:34:07.000000000 -0700
+++ lmo/arch/mips/sibyte/Kconfig 2005-10-19 22:34:12.000000000 -0700
@@ -26,6 +26,16 @@
bool
select SIBYTE_SB1xxx_SOC
+config SIBYTE_BCM1x80
+ bool
+ select HW_HAS_PCI
+ select SIBYTE_SB1xxx_SOC
+
+config SIBYTE_BCM1x55
+ bool
+ select HW_HAS_PCI
+ select SIBYTE_SB1xxx_SOC
+
config SIBYTE_SB1xxx_SOC
bool
depends on EXPERIMENTAL
^ permalink raw reply [flat|nested] 16+ messages in thread
* [PATCH 6/12] bigsur-support
2005-10-20 6:53 [PATCH 0/12] bcm1480 support Andrew Isaacson
` (4 preceding siblings ...)
2005-10-20 6:56 ` [PATCH 5/12] 1480-support Andrew Isaacson
@ 2005-10-20 6:57 ` Andrew Isaacson
2005-10-20 6:57 ` [PATCH 7/12] sb1-cache-exc-handling Andrew Isaacson
` (5 subsequent siblings)
11 siblings, 0 replies; 16+ messages in thread
From: Andrew Isaacson @ 2005-10-20 6:57 UTC (permalink / raw)
To: linux-mips
Support for BigSur board.
Signed-Off-By: Andy Isaacson <adi@broadcom.com>
arch/mips/Kconfig | 9
arch/mips/Makefile | 3
arch/mips/configs/bigsur_defconfig | 877 +++++++++++++++++++++++++++++++++++++
include/asm-mips/sibyte/bigsur.h | 49 ++
include/asm-mips/sibyte/board.h | 4
5 files changed, 942 insertions(+)
Index: lmo/arch/mips/configs/bigsur_defconfig
===================================================================
--- /dev/null 1970-01-01 00:00:00.000000000 +0000
+++ lmo/arch/mips/configs/bigsur_defconfig 2005-10-19 23:36:50.000000000 -0700
@@ -0,0 +1,877 @@
+#
+# Automatically generated make config: don't edit
+# Linux kernel version: 2.6.14-rc2
+# Wed Oct 19 23:36:33 2005
+#
+CONFIG_MIPS=y
+
+#
+# Code maturity level options
+#
+CONFIG_EXPERIMENTAL=y
+CONFIG_CLEAN_COMPILE=y
+CONFIG_LOCK_KERNEL=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
+
+#
+# General setup
+#
+CONFIG_LOCALVERSION=""
+CONFIG_LOCALVERSION_AUTO=y
+CONFIG_SWAP=y
+CONFIG_SYSVIPC=y
+# CONFIG_POSIX_MQUEUE is not set
+# CONFIG_BSD_PROCESS_ACCT is not set
+CONFIG_SYSCTL=y
+# CONFIG_AUDIT is not set
+# CONFIG_HOTPLUG is not set
+CONFIG_KOBJECT_UEVENT=y
+CONFIG_IKCONFIG=y
+CONFIG_IKCONFIG_PROC=y
+# CONFIG_CPUSETS is not set
+CONFIG_INITRAMFS_SOURCE=""
+CONFIG_EMBEDDED=y
+CONFIG_KALLSYMS=y
+# CONFIG_KALLSYMS_ALL is not set
+# CONFIG_KALLSYMS_EXTRA_PASS is not set
+CONFIG_PRINTK=y
+CONFIG_BUG=y
+CONFIG_BASE_FULL=y
+CONFIG_FUTEX=y
+CONFIG_EPOLL=y
+# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
+CONFIG_SHMEM=y
+CONFIG_CC_ALIGN_FUNCTIONS=0
+CONFIG_CC_ALIGN_LABELS=0
+CONFIG_CC_ALIGN_LOOPS=0
+CONFIG_CC_ALIGN_JUMPS=0
+# CONFIG_TINY_SHMEM is not set
+CONFIG_BASE_SMALL=0
+
+#
+# Loadable module support
+#
+CONFIG_MODULES=y
+CONFIG_MODULE_UNLOAD=y
+# CONFIG_MODULE_FORCE_UNLOAD is not set
+CONFIG_OBSOLETE_MODPARM=y
+CONFIG_MODVERSIONS=y
+CONFIG_MODULE_SRCVERSION_ALL=y
+CONFIG_KMOD=y
+CONFIG_STOP_MACHINE=y
+
+#
+# Machine selection
+#
+# CONFIG_MIPS_MTX1 is not set
+# CONFIG_MIPS_BOSPORUS is not set
+# CONFIG_MIPS_PB1000 is not set
+# CONFIG_MIPS_PB1100 is not set
+# CONFIG_MIPS_PB1500 is not set
+# CONFIG_MIPS_PB1550 is not set
+# CONFIG_MIPS_PB1200 is not set
+# CONFIG_MIPS_DB1000 is not set
+# CONFIG_MIPS_DB1100 is not set
+# CONFIG_MIPS_DB1500 is not set
+# CONFIG_MIPS_DB1550 is not set
+# CONFIG_MIPS_DB1200 is not set
+# CONFIG_MIPS_MIRAGE is not set
+# CONFIG_MIPS_COBALT is not set
+# CONFIG_MACH_DECSTATION is not set
+# CONFIG_MIPS_EV64120 is not set
+# CONFIG_MIPS_EV96100 is not set
+# CONFIG_MIPS_IVR is not set
+# CONFIG_MIPS_ITE8172 is not set
+# CONFIG_MACH_JAZZ is not set
+# CONFIG_LASAT is not set
+# CONFIG_MIPS_ATLAS is not set
+# CONFIG_MIPS_MALTA is not set
+# CONFIG_MIPS_SEAD is not set
+# CONFIG_MIPS_SIM is not set
+# CONFIG_MOMENCO_JAGUAR_ATX is not set
+# CONFIG_MOMENCO_OCELOT is not set
+# CONFIG_MOMENCO_OCELOT_3 is not set
+# CONFIG_MOMENCO_OCELOT_C is not set
+# CONFIG_MOMENCO_OCELOT_G is not set
+# CONFIG_MIPS_XXS1500 is not set
+# CONFIG_PNX8550_V2PCI is not set
+# CONFIG_PNX8550_JBS is not set
+# CONFIG_DDB5074 is not set
+# CONFIG_DDB5476 is not set
+# CONFIG_DDB5477 is not set
+# CONFIG_MACH_VR41XX is not set
+# CONFIG_PMC_YOSEMITE is not set
+# CONFIG_QEMU is not set
+# CONFIG_SGI_IP22 is not set
+# CONFIG_SGI_IP27 is not set
+# CONFIG_SGI_IP32 is not set
+CONFIG_SIBYTE_BIGSUR=y
+# CONFIG_SIBYTE_SWARM is not set
+# CONFIG_SIBYTE_SENTOSA is not set
+# CONFIG_SIBYTE_RHONE is not set
+# CONFIG_SIBYTE_CARMEL is not set
+# CONFIG_SIBYTE_PTSWARM is not set
+# CONFIG_SIBYTE_LITTLESUR is not set
+# CONFIG_SIBYTE_CRHINE is not set
+# CONFIG_SIBYTE_CRHONE is not set
+# CONFIG_SNI_RM200_PCI is not set
+# CONFIG_TOSHIBA_JMR3927 is not set
+# CONFIG_TOSHIBA_RBTX4927 is not set
+# CONFIG_TOSHIBA_RBTX4938 is not set
+CONFIG_SIBYTE_BCM1x80=y
+CONFIG_SIBYTE_SB1xxx_SOC=y
+# CONFIG_CPU_SB1_PASS_1 is not set
+# CONFIG_CPU_SB1_PASS_2_1250 is not set
+# CONFIG_CPU_SB1_PASS_2_2 is not set
+# CONFIG_CPU_SB1_PASS_4 is not set
+# CONFIG_CPU_SB1_PASS_2_112x is not set
+# CONFIG_CPU_SB1_PASS_3 is not set
+# CONFIG_SIMULATION is not set
+CONFIG_SIBYTE_CFE=y
+# CONFIG_SIBYTE_CFE_CONSOLE is not set
+# CONFIG_SIBYTE_BUS_WATCHER is not set
+# CONFIG_SIBYTE_SB1250_PROF is not set
+# CONFIG_SIBYTE_TBPROF is not set
+CONFIG_RWSEM_GENERIC_SPINLOCK=y
+CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_DMA_COHERENT=y
+CONFIG_CPU_BIG_ENDIAN=y
+# CONFIG_CPU_LITTLE_ENDIAN is not set
+CONFIG_SYS_SUPPORTS_BIG_ENDIAN=y
+CONFIG_SYS_SUPPORTS_LITTLE_ENDIAN=y
+CONFIG_SWAP_IO_SPACE=y
+CONFIG_BOOT_ELF32=y
+CONFIG_MIPS_L1_CACHE_SHIFT=5
+
+#
+# CPU selection
+#
+# CONFIG_CPU_MIPS32_R1 is not set
+# CONFIG_CPU_MIPS32_R2 is not set
+# CONFIG_CPU_MIPS64_R1 is not set
+# CONFIG_CPU_MIPS64_R2 is not set
+# CONFIG_CPU_R3000 is not set
+# CONFIG_CPU_TX39XX is not set
+# CONFIG_CPU_VR41XX is not set
+# CONFIG_CPU_R4300 is not set
+# CONFIG_CPU_R4X00 is not set
+# CONFIG_CPU_TX49XX is not set
+# CONFIG_CPU_R5000 is not set
+# CONFIG_CPU_R5432 is not set
+# CONFIG_CPU_R6000 is not set
+# CONFIG_CPU_NEVADA is not set
+# CONFIG_CPU_R8000 is not set
+# CONFIG_CPU_R10000 is not set
+# CONFIG_CPU_RM7000 is not set
+# CONFIG_CPU_RM9000 is not set
+CONFIG_CPU_SB1=y
+CONFIG_SYS_SUPPORTS_32BIT_KERNEL=y
+CONFIG_SYS_SUPPORTS_64BIT_KERNEL=y
+CONFIG_CPU_SUPPORTS_32BIT_KERNEL=y
+CONFIG_CPU_SUPPORTS_64BIT_KERNEL=y
+
+#
+# Kernel type
+#
+# CONFIG_32BIT is not set
+CONFIG_64BIT=y
+CONFIG_PAGE_SIZE_4KB=y
+# CONFIG_PAGE_SIZE_8KB is not set
+# CONFIG_PAGE_SIZE_16KB is not set
+# CONFIG_PAGE_SIZE_64KB is not set
+# CONFIG_SIBYTE_DMA_PAGEOPS is not set
+# CONFIG_MIPS_MT is not set
+CONFIG_CPU_HAS_LLSC=y
+CONFIG_CPU_HAS_LLDSCD=y
+CONFIG_CPU_HAS_SYNC=y
+CONFIG_GENERIC_HARDIRQS=y
+CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_CPU_SUPPORTS_HIGHMEM=y
+CONFIG_ARCH_FLATMEM_ENABLE=y
+CONFIG_SELECT_MEMORY_MODEL=y
+CONFIG_FLATMEM_MANUAL=y
+# CONFIG_DISCONTIGMEM_MANUAL is not set
+# CONFIG_SPARSEMEM_MANUAL is not set
+CONFIG_FLATMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
+# CONFIG_SPARSEMEM_STATIC is not set
+CONFIG_SMP=y
+CONFIG_NR_CPUS=4
+CONFIG_PREEMPT_NONE=y
+# CONFIG_PREEMPT_VOLUNTARY is not set
+# CONFIG_PREEMPT is not set
+# CONFIG_PREEMPT_BKL is not set
+
+#
+# Bus options (PCI, PCMCIA, EISA, ISA, TC)
+#
+CONFIG_HW_HAS_PCI=y
+CONFIG_PCI=y
+CONFIG_PCI_LEGACY_PROC=y
+CONFIG_PCI_DEBUG=y
+CONFIG_MMU=y
+
+#
+# PCCARD (PCMCIA/CardBus) support
+#
+# CONFIG_PCCARD is not set
+
+#
+# PCI Hotplug Support
+#
+# CONFIG_HOTPLUG_PCI is not set
+
+#
+# Executable file formats
+#
+CONFIG_BINFMT_ELF=y
+# CONFIG_BINFMT_MISC is not set
+CONFIG_BUILD_ELF64=y
+CONFIG_MIPS32_COMPAT=y
+CONFIG_COMPAT=y
+CONFIG_MIPS32_O32=y
+# CONFIG_MIPS32_N32 is not set
+CONFIG_BINFMT_ELF32=y
+
+#
+# Networking
+#
+CONFIG_NET=y
+
+#
+# Networking options
+#
+CONFIG_PACKET=y
+CONFIG_PACKET_MMAP=y
+CONFIG_UNIX=y
+CONFIG_XFRM=y
+CONFIG_XFRM_USER=m
+CONFIG_NET_KEY=y
+CONFIG_INET=y
+# CONFIG_IP_MULTICAST is not set
+# CONFIG_IP_ADVANCED_ROUTER is not set
+CONFIG_IP_FIB_HASH=y
+CONFIG_IP_PNP=y
+CONFIG_IP_PNP_DHCP=y
+CONFIG_IP_PNP_BOOTP=y
+# CONFIG_IP_PNP_RARP is not set
+# CONFIG_NET_IPIP is not set
+# CONFIG_NET_IPGRE is not set
+# CONFIG_ARPD is not set
+# CONFIG_SYN_COOKIES is not set
+# CONFIG_INET_AH is not set
+# CONFIG_INET_ESP is not set
+# CONFIG_INET_IPCOMP is not set
+CONFIG_INET_TUNNEL=m
+CONFIG_INET_DIAG=y
+CONFIG_INET_TCP_DIAG=y
+# CONFIG_TCP_CONG_ADVANCED is not set
+CONFIG_TCP_CONG_BIC=y
+# CONFIG_IPV6 is not set
+# CONFIG_NETFILTER is not set
+
+#
+# DCCP Configuration (EXPERIMENTAL)
+#
+# CONFIG_IP_DCCP is not set
+
+#
+# SCTP Configuration (EXPERIMENTAL)
+#
+# CONFIG_IP_SCTP is not set
+# CONFIG_ATM is not set
+# CONFIG_BRIDGE is not set
+# CONFIG_VLAN_8021Q is not set
+# CONFIG_DECNET is not set
+# CONFIG_LLC2 is not set
+# CONFIG_IPX is not set
+# CONFIG_ATALK is not set
+# CONFIG_X25 is not set
+# CONFIG_LAPB is not set
+# CONFIG_NET_DIVERT is not set
+# CONFIG_ECONET is not set
+# CONFIG_WAN_ROUTER is not set
+# CONFIG_NET_SCHED is not set
+# CONFIG_NET_CLS_ROUTE is not set
+
+#
+# Network testing
+#
+# CONFIG_NET_PKTGEN is not set
+# CONFIG_HAMRADIO is not set
+# CONFIG_IRDA is not set
+# CONFIG_BT is not set
+# CONFIG_IEEE80211 is not set
+
+#
+# Device Drivers
+#
+
+#
+# Generic Driver Options
+#
+CONFIG_STANDALONE=y
+CONFIG_PREVENT_FIRMWARE_BUILD=y
+# CONFIG_FW_LOADER is not set
+# CONFIG_DEBUG_DRIVER is not set
+
+#
+# Connector - unified userspace <-> kernelspace linker
+#
+# CONFIG_CONNECTOR is not set
+
+#
+# Memory Technology Devices (MTD)
+#
+# CONFIG_MTD is not set
+
+#
+# Parallel port support
+#
+# CONFIG_PARPORT is not set
+
+#
+# Plug and Play support
+#
+
+#
+# Block devices
+#
+# CONFIG_BLK_CPQ_DA is not set
+# CONFIG_BLK_CPQ_CISS_DA is not set
+# CONFIG_BLK_DEV_DAC960 is not set
+# CONFIG_BLK_DEV_UMEM is not set
+# CONFIG_BLK_DEV_COW_COMMON is not set
+CONFIG_BLK_DEV_LOOP=m
+# CONFIG_BLK_DEV_CRYPTOLOOP is not set
+CONFIG_BLK_DEV_NBD=m
+# CONFIG_BLK_DEV_SX8 is not set
+# CONFIG_BLK_DEV_RAM is not set
+CONFIG_BLK_DEV_RAM_COUNT=16
+# CONFIG_CDROM_PKTCDVD is not set
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+CONFIG_IOSCHED_AS=y
+CONFIG_IOSCHED_DEADLINE=y
+CONFIG_IOSCHED_CFQ=y
+# CONFIG_ATA_OVER_ETH is not set
+
+#
+# ATA/ATAPI/MFM/RLL support
+#
+CONFIG_IDE=y
+CONFIG_BLK_DEV_IDE=y
+
+#
+# Please see Documentation/ide.txt for help/info on IDE drives
+#
+# CONFIG_BLK_DEV_IDE_SATA is not set
+CONFIG_BLK_DEV_IDEDISK=y
+# CONFIG_IDEDISK_MULTI_MODE is not set
+CONFIG_BLK_DEV_IDECD=y
+CONFIG_BLK_DEV_IDETAPE=y
+CONFIG_BLK_DEV_IDEFLOPPY=y
+# CONFIG_IDE_TASK_IOCTL is not set
+
+#
+# IDE chipset support/bugfixes
+#
+CONFIG_IDE_GENERIC=y
+# CONFIG_BLK_DEV_IDEPCI is not set
+# CONFIG_BLK_DEV_IDE_SWARM is not set
+# CONFIG_IDE_ARM is not set
+# CONFIG_BLK_DEV_IDEDMA is not set
+# CONFIG_IDEDMA_AUTO is not set
+# CONFIG_BLK_DEV_HD is not set
+
+#
+# SCSI device support
+#
+# CONFIG_RAID_ATTRS is not set
+# CONFIG_SCSI is not set
+
+#
+# Multi-device support (RAID and LVM)
+#
+# CONFIG_MD is not set
+
+#
+# Fusion MPT device support
+#
+# CONFIG_FUSION is not set
+
+#
+# IEEE 1394 (FireWire) support
+#
+# CONFIG_IEEE1394 is not set
+
+#
+# I2O device support
+#
+# CONFIG_I2O is not set
+
+#
+# Network device support
+#
+CONFIG_NETDEVICES=y
+# CONFIG_DUMMY is not set
+# CONFIG_BONDING is not set
+# CONFIG_EQUALIZER is not set
+# CONFIG_TUN is not set
+
+#
+# ARCnet devices
+#
+# CONFIG_ARCNET is not set
+
+#
+# PHY device support
+#
+# CONFIG_PHYLIB is not set
+
+#
+# Ethernet (10 or 100Mbit)
+#
+CONFIG_NET_ETHERNET=y
+CONFIG_MII=y
+# CONFIG_HAPPYMEAL is not set
+# CONFIG_SUNGEM is not set
+# CONFIG_NET_VENDOR_3COM is not set
+
+#
+# Tulip family network device support
+#
+# CONFIG_NET_TULIP is not set
+# CONFIG_HP100 is not set
+# CONFIG_NET_PCI is not set
+
+#
+# Ethernet (1000 Mbit)
+#
+# CONFIG_ACENIC is not set
+# CONFIG_DL2K is not set
+# CONFIG_E1000 is not set
+# CONFIG_NS83820 is not set
+# CONFIG_HAMACHI is not set
+# CONFIG_YELLOWFIN is not set
+# CONFIG_R8169 is not set
+CONFIG_NET_SB1250_MAC=y
+# CONFIG_SIS190 is not set
+# CONFIG_SKGE is not set
+# CONFIG_SK98LIN is not set
+# CONFIG_TIGON3 is not set
+# CONFIG_BNX2 is not set
+
+#
+# Ethernet (10000 Mbit)
+#
+# CONFIG_CHELSIO_T1 is not set
+# CONFIG_IXGB is not set
+# CONFIG_S2IO is not set
+
+#
+# Token Ring devices
+#
+# CONFIG_TR is not set
+
+#
+# Wireless LAN (non-hamradio)
+#
+# CONFIG_NET_RADIO is not set
+
+#
+# Wan interfaces
+#
+# CONFIG_WAN is not set
+# CONFIG_FDDI is not set
+# CONFIG_HIPPI is not set
+# CONFIG_PPP is not set
+# CONFIG_SLIP is not set
+# CONFIG_SHAPER is not set
+# CONFIG_NETCONSOLE is not set
+# CONFIG_NETPOLL is not set
+# CONFIG_NET_POLL_CONTROLLER is not set
+
+#
+# ISDN subsystem
+#
+# CONFIG_ISDN is not set
+
+#
+# Telephony Support
+#
+# CONFIG_PHONE is not set
+
+#
+# Input device support
+#
+# CONFIG_INPUT is not set
+
+#
+# Hardware I/O ports
+#
+CONFIG_SERIO=y
+# CONFIG_SERIO_I8042 is not set
+CONFIG_SERIO_SERPORT=y
+# CONFIG_SERIO_PCIPS2 is not set
+# CONFIG_SERIO_LIBPS2 is not set
+CONFIG_SERIO_RAW=m
+# CONFIG_GAMEPORT is not set
+
+#
+# Character devices
+#
+# CONFIG_VT is not set
+CONFIG_SERIAL_NONSTANDARD=y
+# CONFIG_ROCKETPORT is not set
+# CONFIG_CYCLADES is not set
+# CONFIG_DIGIEPCA is not set
+# CONFIG_MOXA_SMARTIO is not set
+# CONFIG_ISI is not set
+# CONFIG_SYNCLINKMP is not set
+# CONFIG_N_HDLC is not set
+# CONFIG_SPECIALIX is not set
+# CONFIG_SX is not set
+# CONFIG_STALDRV is not set
+CONFIG_SIBYTE_SB1250_DUART=y
+CONFIG_SIBYTE_SB1250_DUART_CONSOLE=y
+
+#
+# Serial drivers
+#
+# CONFIG_SERIAL_8250 is not set
+
+#
+# Non-8250 serial port support
+#
+# CONFIG_SERIAL_JSM is not set
+CONFIG_UNIX98_PTYS=y
+CONFIG_LEGACY_PTYS=y
+CONFIG_LEGACY_PTY_COUNT=256
+
+#
+# IPMI
+#
+# CONFIG_IPMI_HANDLER is not set
+
+#
+# Watchdog Cards
+#
+# CONFIG_WATCHDOG is not set
+# CONFIG_RTC is not set
+CONFIG_GEN_RTC=y
+# CONFIG_GEN_RTC_X is not set
+# CONFIG_DTLK is not set
+# CONFIG_R3964 is not set
+# CONFIG_APPLICOM is not set
+
+#
+# Ftape, the floppy tape device driver
+#
+# CONFIG_DRM is not set
+# CONFIG_RAW_DRIVER is not set
+
+#
+# TPM devices
+#
+# CONFIG_TCG_TPM is not set
+
+#
+# I2C support
+#
+CONFIG_I2C=y
+CONFIG_I2C_CHARDEV=y
+
+#
+# I2C Algorithms
+#
+# CONFIG_I2C_ALGOBIT is not set
+# CONFIG_I2C_ALGOPCF is not set
+# CONFIG_I2C_ALGOPCA is not set
+CONFIG_I2C_ALGO_SIBYTE=y
+
+#
+# I2C Hardware Bus support
+#
+# CONFIG_I2C_ALI1535 is not set
+# CONFIG_I2C_ALI1563 is not set
+# CONFIG_I2C_ALI15X3 is not set
+# CONFIG_I2C_AMD756 is not set
+# CONFIG_I2C_AMD8111 is not set
+# CONFIG_I2C_I801 is not set
+# CONFIG_I2C_I810 is not set
+# CONFIG_I2C_PIIX4 is not set
+# CONFIG_I2C_NFORCE2 is not set
+# CONFIG_I2C_PARPORT_LIGHT is not set
+# CONFIG_I2C_PROSAVAGE is not set
+# CONFIG_I2C_SAVAGE4 is not set
+CONFIG_I2C_SIBYTE=y
+# CONFIG_SCx200_ACB is not set
+# CONFIG_I2C_SIS5595 is not set
+# CONFIG_I2C_SIS630 is not set
+# CONFIG_I2C_SIS96X is not set
+# CONFIG_I2C_STUB is not set
+# CONFIG_I2C_VIA is not set
+# CONFIG_I2C_VIAPRO is not set
+# CONFIG_I2C_VOODOO3 is not set
+# CONFIG_I2C_PCA_ISA is not set
+
+#
+# Miscellaneous I2C Chip support
+#
+CONFIG_SENSORS_DS1337=y
+CONFIG_SENSORS_DS1374=y
+CONFIG_SENSORS_EEPROM=y
+CONFIG_SENSORS_PCF8574=y
+CONFIG_SENSORS_PCA9539=y
+CONFIG_SENSORS_PCF8591=y
+CONFIG_SENSORS_RTC8564=y
+CONFIG_SENSORS_MAX6875=y
+CONFIG_I2C_DEBUG_CORE=y
+CONFIG_I2C_DEBUG_ALGO=y
+CONFIG_I2C_DEBUG_BUS=y
+CONFIG_I2C_DEBUG_CHIP=y
+
+#
+# Dallas's 1-wire bus
+#
+# CONFIG_W1 is not set
+
+#
+# Hardware Monitoring support
+#
+# CONFIG_HWMON is not set
+# CONFIG_HWMON_VID is not set
+
+#
+# Misc devices
+#
+
+#
+# Multimedia Capabilities Port drivers
+#
+
+#
+# Multimedia devices
+#
+# CONFIG_VIDEO_DEV is not set
+
+#
+# Digital Video Broadcasting Devices
+#
+# CONFIG_DVB is not set
+
+#
+# Graphics support
+#
+# CONFIG_FB is not set
+
+#
+# Sound
+#
+# CONFIG_SOUND is not set
+
+#
+# USB support
+#
+CONFIG_USB_ARCH_HAS_HCD=y
+CONFIG_USB_ARCH_HAS_OHCI=y
+# CONFIG_USB is not set
+
+#
+# USB Gadget Support
+#
+# CONFIG_USB_GADGET is not set
+
+#
+# MMC/SD Card support
+#
+# CONFIG_MMC is not set
+
+#
+# InfiniBand support
+#
+# CONFIG_INFINIBAND is not set
+
+#
+# SN Devices
+#
+
+#
+# File systems
+#
+CONFIG_EXT2_FS=y
+CONFIG_EXT2_FS_XATTR=y
+CONFIG_EXT2_FS_POSIX_ACL=y
+CONFIG_EXT2_FS_SECURITY=y
+# CONFIG_EXT2_FS_XIP is not set
+# CONFIG_EXT3_FS is not set
+# CONFIG_JBD is not set
+CONFIG_FS_MBCACHE=y
+# CONFIG_REISERFS_FS is not set
+# CONFIG_JFS_FS is not set
+CONFIG_FS_POSIX_ACL=y
+# CONFIG_XFS_FS is not set
+# CONFIG_MINIX_FS is not set
+# CONFIG_ROMFS_FS is not set
+CONFIG_INOTIFY=y
+# CONFIG_QUOTA is not set
+CONFIG_DNOTIFY=y
+# CONFIG_AUTOFS_FS is not set
+# CONFIG_AUTOFS4_FS is not set
+# CONFIG_FUSE_FS is not set
+
+#
+# CD-ROM/DVD Filesystems
+#
+# CONFIG_ISO9660_FS is not set
+# CONFIG_UDF_FS is not set
+
+#
+# DOS/FAT/NT Filesystems
+#
+# CONFIG_MSDOS_FS is not set
+# CONFIG_VFAT_FS is not set
+# CONFIG_NTFS_FS is not set
+
+#
+# Pseudo filesystems
+#
+CONFIG_PROC_FS=y
+CONFIG_PROC_KCORE=y
+CONFIG_SYSFS=y
+# CONFIG_TMPFS is not set
+# CONFIG_HUGETLB_PAGE is not set
+CONFIG_RAMFS=y
+# CONFIG_RELAYFS_FS is not set
+
+#
+# Miscellaneous filesystems
+#
+# CONFIG_ADFS_FS is not set
+# CONFIG_AFFS_FS is not set
+# CONFIG_HFS_FS is not set
+# CONFIG_HFSPLUS_FS is not set
+# CONFIG_BEFS_FS is not set
+# CONFIG_BFS_FS is not set
+# CONFIG_EFS_FS is not set
+# CONFIG_CRAMFS is not set
+# CONFIG_VXFS_FS is not set
+# CONFIG_HPFS_FS is not set
+# CONFIG_QNX4FS_FS is not set
+# CONFIG_SYSV_FS is not set
+# CONFIG_UFS_FS is not set
+
+#
+# Network File Systems
+#
+CONFIG_NFS_FS=y
+CONFIG_NFS_V3=y
+# CONFIG_NFS_V3_ACL is not set
+# CONFIG_NFS_V4 is not set
+# CONFIG_NFS_DIRECTIO is not set
+# CONFIG_NFSD is not set
+CONFIG_ROOT_NFS=y
+CONFIG_LOCKD=y
+CONFIG_LOCKD_V4=y
+CONFIG_NFS_COMMON=y
+CONFIG_SUNRPC=y
+# CONFIG_RPCSEC_GSS_KRB5 is not set
+# CONFIG_RPCSEC_GSS_SPKM3 is not set
+# CONFIG_SMB_FS is not set
+# CONFIG_CIFS is not set
+# CONFIG_NCP_FS is not set
+# CONFIG_CODA_FS is not set
+# CONFIG_AFS_FS is not set
+# CONFIG_9P_FS is not set
+
+#
+# Partition Types
+#
+# CONFIG_PARTITION_ADVANCED is not set
+CONFIG_MSDOS_PARTITION=y
+
+#
+# Native Language Support
+#
+# CONFIG_NLS is not set
+
+#
+# Profiling support
+#
+# CONFIG_PROFILING is not set
+
+#
+# Kernel hacking
+#
+CONFIG_PRINTK_TIME=y
+CONFIG_DEBUG_KERNEL=y
+CONFIG_MAGIC_SYSRQ=y
+CONFIG_LOG_BUF_SHIFT=16
+CONFIG_DETECT_SOFTLOCKUP=y
+# CONFIG_SCHEDSTATS is not set
+# CONFIG_DEBUG_SLAB is not set
+# CONFIG_DEBUG_SPINLOCK is not set
+# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
+# CONFIG_DEBUG_KOBJECT is not set
+# CONFIG_DEBUG_INFO is not set
+# CONFIG_DEBUG_FS is not set
+CONFIG_CROSSCOMPILE=y
+CONFIG_CMDLINE=""
+# CONFIG_DEBUG_STACK_USAGE is not set
+# CONFIG_KGDB is not set
+# CONFIG_SB1XXX_CORELIS is not set
+# CONFIG_RUNTIME_DEBUG is not set
+
+#
+# Security options
+#
+CONFIG_KEYS=y
+CONFIG_KEYS_DEBUG_PROC_KEYS=y
+# CONFIG_SECURITY is not set
+
+#
+# Cryptographic options
+#
+CONFIG_CRYPTO=y
+CONFIG_CRYPTO_HMAC=y
+CONFIG_CRYPTO_NULL=y
+CONFIG_CRYPTO_MD4=y
+CONFIG_CRYPTO_MD5=y
+CONFIG_CRYPTO_SHA1=y
+CONFIG_CRYPTO_SHA256=y
+CONFIG_CRYPTO_SHA512=y
+CONFIG_CRYPTO_WP512=m
+CONFIG_CRYPTO_TGR192=m
+CONFIG_CRYPTO_DES=y
+CONFIG_CRYPTO_BLOWFISH=y
+CONFIG_CRYPTO_TWOFISH=y
+CONFIG_CRYPTO_SERPENT=y
+CONFIG_CRYPTO_AES=m
+# CONFIG_CRYPTO_CAST5 is not set
+# CONFIG_CRYPTO_CAST6 is not set
+CONFIG_CRYPTO_TEA=m
+# CONFIG_CRYPTO_ARC4 is not set
+CONFIG_CRYPTO_KHAZAD=m
+CONFIG_CRYPTO_ANUBIS=m
+CONFIG_CRYPTO_DEFLATE=y
+CONFIG_CRYPTO_MICHAEL_MIC=y
+# CONFIG_CRYPTO_CRC32C is not set
+# CONFIG_CRYPTO_TEST is not set
+
+#
+# Hardware crypto devices
+#
+
+#
+# Library routines
+#
+# CONFIG_CRC_CCITT is not set
+# CONFIG_CRC16 is not set
+CONFIG_CRC32=y
+# CONFIG_LIBCRC32C is not set
+CONFIG_ZLIB_INFLATE=y
+CONFIG_ZLIB_DEFLATE=y
Index: lmo/arch/mips/Makefile
===================================================================
--- lmo.orig/arch/mips/Makefile 2005-10-19 23:33:29.000000000 -0700
+++ lmo/arch/mips/Makefile 2005-10-19 23:33:29.000000000 -0700
@@ -668,6 +668,7 @@
# Sibyte BCM91125C (CRhone) board
# Sibyte BCM91125E (Rhone) board
# Sibyte SWARM board
+# Sibyte BCM91x80 (BigSur) board
#
libs-$(CONFIG_SIBYTE_CARMEL) += arch/mips/sibyte/swarm/
load-$(CONFIG_SIBYTE_CARMEL) := 0xffffffff80100000
@@ -681,6 +682,8 @@
load-$(CONFIG_SIBYTE_SENTOSA) := 0xffffffff80100000
libs-$(CONFIG_SIBYTE_SWARM) += arch/mips/sibyte/swarm/
load-$(CONFIG_SIBYTE_SWARM) := 0xffffffff80100000
+libs-$(CONFIG_SIBYTE_BIGSUR) += arch/mips/sibyte/swarm/
+load-$(CONFIG_SIBYTE_BIGSUR) := 0xffffffff80100000
#
# SNI RM200 PCI
Index: lmo/arch/mips/Kconfig
===================================================================
--- lmo.orig/arch/mips/Kconfig 2005-10-19 23:33:29.000000000 -0700
+++ lmo/arch/mips/Kconfig 2005-10-19 23:33:41.000000000 -0700
@@ -544,6 +544,15 @@
help
If you want this kernel to run on SGI O2 workstation, say Y here.
+config SIBYTE_BIGSUR
+ bool "Support for Sibyte BigSur"
+ select BOOT_ELF32
+ select DMA_COHERENT
+ select SIBYTE_BCM1x80
+ select SWAP_IO_SPACE
+ select SYS_SUPPORTS_BIG_ENDIAN
+ select SYS_SUPPORTS_LITTLE_ENDIAN
+
config SIBYTE_SWARM
bool "Support for Sibyte BCM91250A-SWARM"
select BOOT_ELF32
Index: lmo/include/asm-mips/sibyte/board.h
===================================================================
--- lmo.orig/include/asm-mips/sibyte/board.h 2005-10-19 23:29:58.000000000 -0700
+++ lmo/include/asm-mips/sibyte/board.h 2005-10-19 23:33:29.000000000 -0700
@@ -35,6 +35,10 @@
#include <asm/sibyte/carmel.h>
#endif
+#ifdef CONFIG_SIBYTE_BIGSUR
+#include <asm/sibyte/bigsur.h>
+#endif
+
#ifdef __ASSEMBLY__
#ifdef LEDS_PHYS
Index: lmo/include/asm-mips/sibyte/bigsur.h
===================================================================
--- /dev/null 1970-01-01 00:00:00.000000000 +0000
+++ lmo/include/asm-mips/sibyte/bigsur.h 2005-10-19 23:33:29.000000000 -0700
@@ -0,0 +1,49 @@
+/*
+ * Copyright (C) 2000,2001,2002,2003,2004 Broadcom Corporation
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version 2
+ * of the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
+ */
+#ifndef __ASM_SIBYTE_BIGSUR_H
+#define __ASM_SIBYTE_BIGSUR_H
+
+#include <asm/sibyte/sb1250.h>
+#include <asm/sibyte/bcm1480_int.h>
+
+#ifdef CONFIG_SIBYTE_BIGSUR
+#define SIBYTE_BOARD_NAME "BCM91x80A/B (BigSur)"
+#define SIBYTE_HAVE_PCMCIA 1
+#define SIBYTE_HAVE_IDE 1
+#endif
+
+/* Generic bus chip selects */
+#define LEDS_CS 3
+#define LEDS_PHYS 0x100a0000
+
+#ifdef SIBYTE_HAVE_IDE
+#define IDE_CS 4
+#define IDE_PHYS 0x100b0000
+#define K_GPIO_GB_IDE 4
+#define K_INT_GB_IDE (K_INT_GPIO_0 + K_GPIO_GB_IDE)
+#endif
+
+#ifdef SIBYTE_HAVE_PCMCIA
+#define PCMCIA_CS 6
+#define PCMCIA_PHYS 0x11000000
+#define K_GPIO_PC_READY 9
+#define K_INT_PC_READY (K_INT_GPIO_0 + K_GPIO_PC_READY)
+#endif
+
+#endif /* __ASM_SIBYTE_BIGSUR_H */
+
^ permalink raw reply [flat|nested] 16+ messages in thread
* [PATCH 7/12] sb1-cache-exc-handling
2005-10-20 6:53 [PATCH 0/12] bcm1480 support Andrew Isaacson
` (5 preceding siblings ...)
2005-10-20 6:57 ` [PATCH 6/12] bigsur-support Andrew Isaacson
@ 2005-10-20 6:57 ` Andrew Isaacson
2005-10-20 6:57 ` [PATCH 8/12] cerr-printk-not-prom-printf Andrew Isaacson
` (4 subsequent siblings)
11 siblings, 0 replies; 16+ messages in thread
From: Andrew Isaacson @ 2005-10-20 6:57 UTC (permalink / raw)
To: linux-mips
Expand SB1 cache error handling by adding SB1_CEX_ALWAYS_FATAL and
SB1_CEX_STALL, allowing configurable behavior on cache errors.
Signed-Off-By: Andy Isaacson <adi@broadcom.com>
arch/mips/mm/cerr-sb1.c | 54 ++++++++++++++++++++++++++++++++++++++++-------
arch/mips/mm/cex-sb1.S | 5 ++++
arch/mips/sibyte/Kconfig | 8 ++++++
3 files changed, 59 insertions(+), 8 deletions(-)
Index: lmo/arch/mips/mm/cerr-sb1.c
===================================================================
--- lmo.orig/arch/mips/mm/cerr-sb1.c 2005-10-19 22:34:07.000000000 -0700
+++ lmo/arch/mips/mm/cerr-sb1.c 2005-10-19 22:34:12.000000000 -0700
@@ -19,13 +19,19 @@
#include <linux/sched.h>
#include <asm/mipsregs.h>
#include <asm/sibyte/sb1250.h>
+#include <asm/sibyte/sb1250_regs.h>
-#ifndef CONFIG_SIBYTE_BUS_WATCHER
+#if !defined(CONFIG_SIBYTE_BUS_WATCHER) || defined(CONFIG_SIBYTE_BW_TRACE)
#include <asm/io.h>
-#include <asm/sibyte/sb1250_regs.h>
#include <asm/sibyte/sb1250_scd.h>
#endif
+/*
+ * We'd like to dump the L2_ECC_TAG register on errors, but errata make
+ * that unsafe... So for now we don't. (BCM1250/BCM112x erratum SOC-48.)
+ */
+#undef DUMP_L2_ECC_TAG_ON_ERROR
+
/* SB1 definitions */
/* XXX should come from config1 XXX */
@@ -139,12 +145,18 @@
static void check_bus_watcher(void)
{
uint32_t status, l2_err, memio_err;
+#ifdef DUMP_L2_ECC_TAG_ON_ERROR
+ uint64_t l2_tag;
+#endif
/* Destructive read, clears register and interrupt */
status = csr_in32(IOADDR(A_SCD_BUS_ERR_STATUS));
/* Bit 31 is always on, but there's no #define for that */
if (status & ~(1UL << 31)) {
l2_err = csr_in32(IOADDR(A_BUS_L2_ERRORS));
+#ifdef DUMP_L2_ECC_TAG_ON_ERROR
+ l2_tag = in64(IO_SPACE_BASE | A_L2_ECC_TAG);
+#endif
memio_err = csr_in32(IOADDR(A_BUS_MEM_IO_ERRORS));
prom_printf("Bus watcher error counters: %08x %08x\n", l2_err, memio_err);
prom_printf("\nLast recorded signature:\n");
@@ -153,6 +165,9 @@
(int)(G_SCD_BERR_TID(status) >> 6),
(int)G_SCD_BERR_RID(status),
(int)G_SCD_BERR_DCODE(status));
+#ifdef DUMP_L2_ECC_TAG_ON_ERROR
+ prom_printf("Last L2 tag w/ bad ECC: %016llx\n", l2_tag);
+#endif
} else {
prom_printf("Bus watcher indicates no error\n");
}
@@ -166,6 +181,16 @@
uint64_t cerr_dpa;
uint32_t errctl, cerr_i, cerr_d, dpalo, dpahi, eepc, res;
+#ifdef CONFIG_SIBYTE_BW_TRACE
+ /* Freeze the trace buffer now */
+#if defined(CONFIG_SIBYTE_BCM1x55) || defined(CONFIG_SIBYTE_BCM1x80)
+ csr_out32(M_BCM1480_SCD_TRACE_CFG_FREEZE, IO_SPACE_BASE | A_SCD_TRACE_CFG);
+#else
+ csr_out32(M_SCD_TRACE_CFG_FREEZE, IO_SPACE_BASE | A_SCD_TRACE_CFG);
+#endif
+ prom_printf("Trace buffer frozen\n");
+#endif
+
prom_printf("Cache error exception on CPU %x:\n",
(read_c0_prid() >> 25) & 0x7);
@@ -229,11 +254,19 @@
check_bus_watcher();
- while (1);
/*
- * This tends to make things get really ugly; let's just stall instead.
- * panic("Can't handle the cache error!");
+ * Calling panic() when a fatal cache error occurs scrambles the
+ * state of the system (and the cache), making it difficult to
+ * investigate after the fact. However, if you just stall the CPU,
+ * the other CPU may keep on running, which is typically very
+ * undesirable.
*/
+#ifdef CONFIG_SB1_CERR_STALL
+ while (1)
+ ;
+#else
+ panic("unhandled cache error");
+#endif
}
@@ -434,7 +467,8 @@
};
#define DC_TAG_VALID(state) \
- (((state) == 0xf) || ((state) == 0x13) || ((state) == 0x19) || ((state == 0x16)) || ((state) == 0x1c))
+ (((state) == 0x0) || ((state) == 0xf) || ((state) == 0x13) || \
+ ((state) == 0x19) || ((state) == 0x16) || ((state) == 0x1c))
static char *dc_state_str(unsigned char state)
{
@@ -505,6 +539,7 @@
uint64_t datalo;
uint32_t datalohi, datalolo, datahi;
int offset;
+ char bad_ecc = 0;
for (offset = 0; offset < 4; offset++) {
/* Index-load-data-D */
@@ -525,8 +560,7 @@
ecc = dc_ecc(datalo);
if (ecc != datahi) {
int bits = 0;
- prom_printf(" ** bad ECC (%02x %02x) ->",
- datahi, ecc);
+ bad_ecc |= 1 << (3-offset);
ecc ^= datahi;
while (ecc) {
if (ecc & 1) bits++;
@@ -537,6 +571,10 @@
prom_printf(" %02X-%016llX", datahi, datalo);
}
prom_printf("\n");
+ if (bad_ecc)
+ prom_printf(" dwords w/ bad ECC: %d %d %d %d\n",
+ !!(bad_ecc & 8), !!(bad_ecc & 4),
+ !!(bad_ecc & 2), !!(bad_ecc & 1));
}
}
return res;
Index: lmo/arch/mips/mm/cex-sb1.S
===================================================================
--- lmo.orig/arch/mips/mm/cex-sb1.S 2005-10-19 22:34:07.000000000 -0700
+++ lmo/arch/mips/mm/cex-sb1.S 2005-10-19 22:34:12.000000000 -0700
@@ -64,6 +64,10 @@
sd k0,0x170($0)
sd k1,0x178($0)
+#if CONFIG_SB1_CEX_ALWAYS_FATAL
+ j handle_vec2_sb1
+ nop
+#else
/*
* M_ERRCTL_RECOVERABLE is bit 31, which makes it easy to tell
* if we can fast-path out of here for a h/w-recovered error.
@@ -134,6 +138,7 @@
/* Unrecoverable Icache or Dcache error; log it and/or fail */
j handle_vec2_sb1
nop
+#endif
END(except_vec2_sb1)
Index: lmo/arch/mips/sibyte/Kconfig
===================================================================
--- lmo.orig/arch/mips/sibyte/Kconfig 2005-10-19 22:34:12.000000000 -0700
+++ lmo/arch/mips/sibyte/Kconfig 2005-10-19 22:34:12.000000000 -0700
@@ -102,6 +102,14 @@
Build a kernel suitable for running under the GDB simulator.
Primarily adjusts the kernel's notion of time.
+config CONFIG_SB1_CEX_ALWAYS_FATAL
+ bool "All cache exceptions considered fatal (no recovery attempted)"
+ depends on SIBYTE_SB1xxx_SOC
+
+config CONFIG_SB1_CERR_STALL
+ bool "Stall (rather than panic) on fatal cache error"
+ depends on SIBYTE_SB1xxx_SOC
+
config SIBYTE_CFE
bool "Booting from CFE"
depends on SIBYTE_SB1xxx_SOC
^ permalink raw reply [flat|nested] 16+ messages in thread
* [PATCH 8/12] cerr-printk-not-prom-printf
2005-10-20 6:53 [PATCH 0/12] bcm1480 support Andrew Isaacson
` (6 preceding siblings ...)
2005-10-20 6:57 ` [PATCH 7/12] sb1-cache-exc-handling Andrew Isaacson
@ 2005-10-20 6:57 ` Andrew Isaacson
2005-10-20 10:49 ` Ralf Baechle
2005-10-20 6:58 ` [PATCH 9/12] sbmac-fixes Andrew Isaacson
` (3 subsequent siblings)
11 siblings, 1 reply; 16+ messages in thread
From: Andrew Isaacson @ 2005-10-20 6:57 UTC (permalink / raw)
To: linux-mips
Use printk rather than prom_printf in cache error handlers.
prom_printf does not handle SMP locking, and shows up only
on console (not in dmesg(1) or syslog).
Signed-Off-By: Andy Isaacson <adi@broadcom.com>
arch/mips/mm/cerr-sb1.c | 122 ++++++++++++++++++++++++------------------------
1 files changed, 61 insertions(+), 61 deletions(-)
Index: lmo/arch/mips/mm/cerr-sb1.c
===================================================================
--- lmo.orig/arch/mips/mm/cerr-sb1.c 2005-10-19 22:34:12.000000000 -0700
+++ lmo/arch/mips/mm/cerr-sb1.c 2005-10-19 22:34:12.000000000 -0700
@@ -78,66 +78,66 @@
static inline void breakout_errctl(unsigned int val)
{
if (val & CP0_ERRCTL_RECOVERABLE)
- prom_printf(" recoverable");
+ printk(" recoverable");
if (val & CP0_ERRCTL_DCACHE)
- prom_printf(" dcache");
+ printk(" dcache");
if (val & CP0_ERRCTL_ICACHE)
- prom_printf(" icache");
+ printk(" icache");
if (val & CP0_ERRCTL_MULTIBUS)
- prom_printf(" multiple-buserr");
- prom_printf("\n");
+ printk(" multiple-buserr");
+ printk("\n");
}
static inline void breakout_cerri(unsigned int val)
{
if (val & CP0_CERRI_TAG_PARITY)
- prom_printf(" tag-parity");
+ printk(" tag-parity");
if (val & CP0_CERRI_DATA_PARITY)
- prom_printf(" data-parity");
+ printk(" data-parity");
if (val & CP0_CERRI_EXTERNAL)
- prom_printf(" external");
- prom_printf("\n");
+ printk(" external");
+ printk("\n");
}
static inline void breakout_cerrd(unsigned int val)
{
switch (val & CP0_CERRD_CAUSES) {
case CP0_CERRD_LOAD:
- prom_printf(" load,");
+ printk(" load,");
break;
case CP0_CERRD_STORE:
- prom_printf(" store,");
+ printk(" store,");
break;
case CP0_CERRD_FILLWB:
- prom_printf(" fill/wb,");
+ printk(" fill/wb,");
break;
case CP0_CERRD_COHERENCY:
- prom_printf(" coherency,");
+ printk(" coherency,");
break;
case CP0_CERRD_DUPTAG:
- prom_printf(" duptags,");
+ printk(" duptags,");
break;
default:
- prom_printf(" NO CAUSE,");
+ printk(" NO CAUSE,");
break;
}
if (!(val & CP0_CERRD_TYPES))
- prom_printf(" NO TYPE");
+ printk(" NO TYPE");
else {
if (val & CP0_CERRD_MULTIPLE)
- prom_printf(" multi-err");
+ printk(" multi-err");
if (val & CP0_CERRD_TAG_STATE)
- prom_printf(" tag-state");
+ printk(" tag-state");
if (val & CP0_CERRD_TAG_ADDRESS)
- prom_printf(" tag-address");
+ printk(" tag-address");
if (val & CP0_CERRD_DATA_SBE)
- prom_printf(" data-SBE");
+ printk(" data-SBE");
if (val & CP0_CERRD_DATA_DBE)
- prom_printf(" data-DBE");
+ printk(" data-DBE");
if (val & CP0_CERRD_EXTERNAL)
- prom_printf(" external");
+ printk(" external");
}
- prom_printf("\n");
+ printk("\n");
}
#ifndef CONFIG_SIBYTE_BUS_WATCHER
@@ -158,18 +158,18 @@
l2_tag = in64(IO_SPACE_BASE | A_L2_ECC_TAG);
#endif
memio_err = csr_in32(IOADDR(A_BUS_MEM_IO_ERRORS));
- prom_printf("Bus watcher error counters: %08x %08x\n", l2_err, memio_err);
- prom_printf("\nLast recorded signature:\n");
- prom_printf("Request %02x from %d, answered by %d with Dcode %d\n",
+ printk("Bus watcher error counters: %08x %08x\n", l2_err, memio_err);
+ printk("\nLast recorded signature:\n");
+ printk("Request %02x from %d, answered by %d with Dcode %d\n",
(unsigned int)(G_SCD_BERR_TID(status) & 0x3f),
(int)(G_SCD_BERR_TID(status) >> 6),
(int)G_SCD_BERR_RID(status),
(int)G_SCD_BERR_DCODE(status));
#ifdef DUMP_L2_ECC_TAG_ON_ERROR
- prom_printf("Last L2 tag w/ bad ECC: %016llx\n", l2_tag);
+ printk("Last L2 tag w/ bad ECC: %016llx\n", l2_tag);
#endif
} else {
- prom_printf("Bus watcher indicates no error\n");
+ printk("Bus watcher indicates no error\n");
}
}
#else
@@ -184,14 +184,14 @@
#ifdef CONFIG_SIBYTE_BW_TRACE
/* Freeze the trace buffer now */
#if defined(CONFIG_SIBYTE_BCM1x55) || defined(CONFIG_SIBYTE_BCM1x80)
- csr_out32(M_BCM1480_SCD_TRACE_CFG_FREEZE, IO_SPACE_BASE | A_SCD_TRACE_CFG);
+ csr_out32(M_BCM1480_SCD_TRACE_CFG_FREEZE, IOADDR(A_SCD_TRACE_CFG));
#else
- csr_out32(M_SCD_TRACE_CFG_FREEZE, IO_SPACE_BASE | A_SCD_TRACE_CFG);
+ csr_out32(M_SCD_TRACE_CFG_FREEZE, IOADDR(A_SCD_TRACE_CFG));
#endif
- prom_printf("Trace buffer frozen\n");
+ printk("Trace buffer frozen\n");
#endif
- prom_printf("Cache error exception on CPU %x:\n",
+ printk("Cache error exception on CPU %x:\n",
(read_c0_prid() >> 25) & 0x7);
__asm__ __volatile__ (
@@ -210,43 +210,43 @@
"=r" (dpahi), "=r" (dpalo), "=r" (eepc));
cerr_dpa = (((uint64_t)dpahi) << 32) | dpalo;
- prom_printf(" c0_errorepc == %08x\n", eepc);
- prom_printf(" c0_errctl == %08x", errctl);
+ printk(" c0_errorepc == %08x\n", eepc);
+ printk(" c0_errctl == %08x", errctl);
breakout_errctl(errctl);
if (errctl & CP0_ERRCTL_ICACHE) {
- prom_printf(" c0_cerr_i == %08x", cerr_i);
+ printk(" c0_cerr_i == %08x", cerr_i);
breakout_cerri(cerr_i);
if (CP0_CERRI_IDX_VALID(cerr_i)) {
/* Check index of EPC, allowing for delay slot */
if (((eepc & SB1_CACHE_INDEX_MASK) != (cerr_i & SB1_CACHE_INDEX_MASK)) &&
((eepc & SB1_CACHE_INDEX_MASK) != ((cerr_i & SB1_CACHE_INDEX_MASK) - 4)))
- prom_printf(" cerr_i idx doesn't match eepc\n");
+ printk(" cerr_i idx doesn't match eepc\n");
else {
res = extract_ic(cerr_i & SB1_CACHE_INDEX_MASK,
(cerr_i & CP0_CERRI_DATA) != 0);
if (!(res & cerr_i))
- prom_printf("...didn't see indicated icache problem\n");
+ printk("...didn't see indicated icache problem\n");
}
}
}
if (errctl & CP0_ERRCTL_DCACHE) {
- prom_printf(" c0_cerr_d == %08x", cerr_d);
+ printk(" c0_cerr_d == %08x", cerr_d);
breakout_cerrd(cerr_d);
if (CP0_CERRD_DPA_VALID(cerr_d)) {
- prom_printf(" c0_cerr_dpa == %010llx\n", cerr_dpa);
+ printk(" c0_cerr_dpa == %010llx\n", cerr_dpa);
if (!CP0_CERRD_IDX_VALID(cerr_d)) {
res = extract_dc(cerr_dpa & SB1_CACHE_INDEX_MASK,
(cerr_d & CP0_CERRD_DATA) != 0);
if (!(res & cerr_d))
- prom_printf("...didn't see indicated dcache problem\n");
+ printk("...didn't see indicated dcache problem\n");
} else {
if ((cerr_dpa & SB1_CACHE_INDEX_MASK) != (cerr_d & SB1_CACHE_INDEX_MASK))
- prom_printf(" cerr_d idx doesn't match cerr_dpa\n");
+ printk(" cerr_d idx doesn't match cerr_dpa\n");
else {
res = extract_dc(cerr_d & SB1_CACHE_INDEX_MASK,
(cerr_d & CP0_CERRD_DATA) != 0);
if (!(res & cerr_d))
- prom_printf("...didn't see indicated problem\n");
+ printk("...didn't see indicated problem\n");
}
}
}
@@ -335,7 +335,7 @@
uint8_t lru;
int res = 0;
- prom_printf("Icache index 0x%04x ", addr);
+ printk("Icache index 0x%04x ", addr);
for (way = 0; way < 4; way++) {
/* Index-load-tag-I */
__asm__ __volatile__ (
@@ -355,7 +355,7 @@
taglo = ((unsigned long long)taglohi << 32) | taglolo;
if (way == 0) {
lru = (taghi >> 14) & 0xff;
- prom_printf("[Bank %d Set 0x%02x] LRU > %d %d %d %d > MRU\n",
+ printk("[Bank %d Set 0x%02x] LRU > %d %d %d %d > MRU\n",
((addr >> 5) & 0x3), /* bank */
((addr >> 7) & 0x3f), /* index */
(lru & 0x3),
@@ -370,19 +370,19 @@
if (valid) {
tlo_tmp = taglo & 0xfff3ff;
if (((taglo >> 10) & 1) ^ range_parity(tlo_tmp, 23, 0)) {
- prom_printf(" ** bad parity in VTag0/G/ASID\n");
+ printk(" ** bad parity in VTag0/G/ASID\n");
res |= CP0_CERRI_TAG_PARITY;
}
if (((taglo >> 11) & 1) ^ range_parity(taglo, 63, 24)) {
- prom_printf(" ** bad parity in R/VTag1\n");
+ printk(" ** bad parity in R/VTag1\n");
res |= CP0_CERRI_TAG_PARITY;
}
}
if (valid ^ ((taghi >> 27) & 1)) {
- prom_printf(" ** bad parity for valid bit\n");
+ printk(" ** bad parity for valid bit\n");
res |= CP0_CERRI_TAG_PARITY;
}
- prom_printf(" %d [VA %016llx] [Vld? %d] raw tags: %08X-%016llX\n",
+ printk(" %d [VA %016llx] [Vld? %d] raw tags: %08X-%016llX\n",
way, va, valid, taghi, taglo);
if (data) {
@@ -408,21 +408,21 @@
: "r" ((way << 13) | addr | (offset << 3)));
predecode = (datahi >> 8) & 0xff;
if (((datahi >> 16) & 1) != (uint32_t)range_parity(predecode, 7, 0)) {
- prom_printf(" ** bad parity in predecode\n");
+ printk(" ** bad parity in predecode\n");
res |= CP0_CERRI_DATA_PARITY;
}
/* XXXKW should/could check predecode bits themselves */
if (((datahi >> 4) & 0xf) ^ inst_parity(insta)) {
- prom_printf(" ** bad parity in instruction a\n");
+ printk(" ** bad parity in instruction a\n");
res |= CP0_CERRI_DATA_PARITY;
}
if ((datahi & 0xf) ^ inst_parity(instb)) {
- prom_printf(" ** bad parity in instruction b\n");
+ printk(" ** bad parity in instruction b\n");
res |= CP0_CERRI_DATA_PARITY;
}
- prom_printf(" %05X-%08X%08X", datahi, insta, instb);
+ printk(" %05X-%08X%08X", datahi, insta, instb);
}
- prom_printf("\n");
+ printk("\n");
}
}
return res;
@@ -490,7 +490,7 @@
uint8_t ecc, lru;
int res = 0;
- prom_printf("Dcache index 0x%04x ", addr);
+ printk("Dcache index 0x%04x ", addr);
for (way = 0; way < 4; way++) {
__asm__ __volatile__ (
" .set push\n\t"
@@ -510,7 +510,7 @@
pa = (taglo & 0xFFFFFFE000ULL) | addr;
if (way == 0) {
lru = (taghi >> 14) & 0xff;
- prom_printf("[Bank %d Set 0x%02x] LRU > %d %d %d %d > MRU\n",
+ printk("[Bank %d Set 0x%02x] LRU > %d %d %d %d > MRU\n",
((addr >> 11) & 0x2) | ((addr >> 5) & 1), /* bank */
((addr >> 6) & 0x3f), /* index */
(lru & 0x3),
@@ -520,15 +520,15 @@
}
state = (taghi >> 25) & 0x1f;
valid = DC_TAG_VALID(state);
- prom_printf(" %d [PA %010llx] [state %s (%02x)] raw tags: %08X-%016llX\n",
+ printk(" %d [PA %010llx] [state %s (%02x)] raw tags: %08X-%016llX\n",
way, pa, dc_state_str(state), state, taghi, taglo);
if (valid) {
if (((taglo >> 11) & 1) ^ range_parity(taglo, 39, 26)) {
- prom_printf(" ** bad parity in PTag1\n");
+ printk(" ** bad parity in PTag1\n");
res |= CP0_CERRD_TAG_ADDRESS;
}
if (((taglo >> 10) & 1) ^ range_parity(taglo, 25, 13)) {
- prom_printf(" ** bad parity in PTag0\n");
+ printk(" ** bad parity in PTag0\n");
res |= CP0_CERRD_TAG_ADDRESS;
}
} else {
@@ -568,11 +568,11 @@
}
res |= (bits == 1) ? CP0_CERRD_DATA_SBE : CP0_CERRD_DATA_DBE;
}
- prom_printf(" %02X-%016llX", datahi, datalo);
+ printk(" %02X-%016llX", datahi, datalo);
}
- prom_printf("\n");
+ printk("\n");
if (bad_ecc)
- prom_printf(" dwords w/ bad ECC: %d %d %d %d\n",
+ printk(" dwords w/ bad ECC: %d %d %d %d\n",
!!(bad_ecc & 8), !!(bad_ecc & 4),
!!(bad_ecc & 2), !!(bad_ecc & 1));
}
^ permalink raw reply [flat|nested] 16+ messages in thread
* [PATCH 9/12] sbmac-fixes
2005-10-20 6:53 [PATCH 0/12] bcm1480 support Andrew Isaacson
` (7 preceding siblings ...)
2005-10-20 6:57 ` [PATCH 8/12] cerr-printk-not-prom-printf Andrew Isaacson
@ 2005-10-20 6:58 ` Andrew Isaacson
2005-10-20 6:58 ` [PATCH 10/12] 1480-pci-support Andrew Isaacson
` (2 subsequent siblings)
11 siblings, 0 replies; 16+ messages in thread
From: Andrew Isaacson @ 2005-10-20 6:58 UTC (permalink / raw)
To: linux-mips
Improve sb1250-mac driver to probe for PHYs at addresses other
than 1, such as the PHYs on BigSur.
Signed-Off-By: Andy Isaacson <adi@broadcom.com>
drivers/net/sb1250-mac.c | 36 ++++++++++++++++++++++++++++++++++++
1 files changed, 36 insertions(+)
Index: lmo/drivers/net/sb1250-mac.c
===================================================================
--- lmo.orig/drivers/net/sb1250-mac.c 2005-10-19 22:34:12.000000000 -0700
+++ lmo/drivers/net/sb1250-mac.c 2005-10-19 22:34:12.000000000 -0700
@@ -314,6 +314,7 @@
static int sbmac_mii_ioctl(struct net_device *dev, struct ifreq *rq, int cmd);
static int sbmac_close(struct net_device *dev);
static int sbmac_mii_poll(struct sbmac_softc *s,int noisy);
+static int sbmac_mii_probe(struct net_device *dev);
static void sbmac_mii_sync(struct sbmac_softc *s);
static void sbmac_mii_senddata(struct sbmac_softc *s,unsigned int data, int bitcnt);
@@ -451,6 +452,9 @@
#define MII_BMCR 0x00 /* Basic mode control register (rw) */
#define MII_BMSR 0x01 /* Basic mode status register (ro) */
+#define MII_PHYIDR1 0x02
+#define MII_PHYIDR2 0x03
+
#define MII_K1STSR 0x0A /* 1K Status Register (ro) */
#define MII_ANLPAR 0x05 /* Autonegotiation lnk partner abilities (rw) */
@@ -2460,6 +2464,15 @@
return -EBUSY;
/*
+ * Probe phy address
+ */
+
+ if(sbmac_mii_probe(dev) == -1) {
+ printk("%s: failed to probe PHY.\n", dev->name);
+ return -EINVAL;
+ }
+
+ /*
* Configure default speed
*/
@@ -2492,6 +2505,29 @@
return 0;
}
+static int sbmac_mii_probe(struct net_device *dev)
+{
+ int i;
+ struct sbmac_softc *s = netdev_priv(dev);
+ u16 bmsr, id1, id2;
+ u32 vendor, device;
+
+ for (i=1; i<31; i++) {
+ bmsr = sbmac_mii_read(s, i, MII_BMSR);
+ if (bmsr != 0) {
+ s->sbm_phys[0] = i;
+ id1 = sbmac_mii_read(s, i, MII_PHYIDR1);
+ id2 = sbmac_mii_read(s, i, MII_PHYIDR2);
+ vendor = ((u32)id1 << 6) | ((id2 >> 10) & 0x3f);
+ device = (id2 >> 4) & 0x3f;
+
+ printk(KERN_INFO "%s: found phy %d, vendor %06x part %02x\n",
+ dev->name, i, vendor, device);
+ return i;
+ }
+ }
+ return -1;
+}
static int sbmac_mii_poll(struct sbmac_softc *s,int noisy)
^ permalink raw reply [flat|nested] 16+ messages in thread
* [PATCH 10/12] 1480-pci-support
2005-10-20 6:53 [PATCH 0/12] bcm1480 support Andrew Isaacson
` (8 preceding siblings ...)
2005-10-20 6:58 ` [PATCH 9/12] sbmac-fixes Andrew Isaacson
@ 2005-10-20 6:58 ` Andrew Isaacson
2005-10-20 6:59 ` [PATCH 11/12] 1480-ht-support Andrew Isaacson
2005-10-20 6:59 ` [PATCH 12/12] pci-expmem-hack Andrew Isaacson
11 siblings, 0 replies; 16+ messages in thread
From: Andrew Isaacson @ 2005-10-20 6:58 UTC (permalink / raw)
To: linux-mips
PCI support code for bcm1480 on-chip PCI-X bridge
Signed-Off-By: Andy Isaacson <adi@broadcom.com>
arch/mips/pci/Makefile | 1
arch/mips/pci/pci-bcm1480.c | 256 ++++++++++++++++++++++++++++++++++++++++++++
2 files changed, 257 insertions(+)
Index: lmo/arch/mips/pci/Makefile
===================================================================
--- lmo.orig/arch/mips/pci/Makefile 2005-10-19 22:34:07.000000000 -0700
+++ lmo/arch/mips/pci/Makefile 2005-10-19 22:34:13.000000000 -0700
@@ -46,6 +46,7 @@
obj-$(CONFIG_SGI_IP27) += pci-ip27.o
obj-$(CONFIG_SGI_IP32) += fixup-ip32.o ops-mace.o pci-ip32.o
obj-$(CONFIG_SIBYTE_SB1250) += fixup-sb1250.o pci-sb1250.o
+obj-$(CONFIG_SIBYTE_BCM1x80) += pci-bcm1480.o
obj-$(CONFIG_SNI_RM200_PCI) += fixup-sni.o ops-sni.o
obj-$(CONFIG_TANBAC_TB0219) += fixup-tb0219.o
obj-$(CONFIG_TANBAC_TB0226) += fixup-tb0226.o
Index: lmo/arch/mips/pci/pci-bcm1480.c
===================================================================
--- /dev/null 1970-01-01 00:00:00.000000000 +0000
+++ lmo/arch/mips/pci/pci-bcm1480.c 2005-10-19 22:34:13.000000000 -0700
@@ -0,0 +1,256 @@
+/*
+ * Copyright (C) 2001,2002,2005 Broadcom Corporation
+ * Copyright (C) 2004 by Ralf Baechle (ralf@linux-mips.org)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version 2
+ * of the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
+ */
+
+/*
+ * BCM1x80/1x55-specific PCI support
+ *
+ * This module provides the glue between Linux's PCI subsystem
+ * and the hardware. We basically provide glue for accessing
+ * configuration space, and set up the translation for I/O
+ * space accesses.
+ *
+ * To access configuration space, we use ioremap. In the 32-bit
+ * kernel, this consumes either 4 or 8 page table pages, and 16MB of
+ * kernel mapped memory. Hopefully neither of these should be a huge
+ * problem.
+ *
+ * XXX: AT THIS TIME, ONLY the NATIVE PCI-X INTERFACE IS SUPPORTED.
+ */
+#include <linux/config.h>
+#include <linux/types.h>
+#include <linux/pci.h>
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/mm.h>
+#include <linux/console.h>
+#include <linux/tty.h>
+
+#include <asm/sibyte/bcm1480_regs.h>
+#include <asm/sibyte/bcm1480_scd.h>
+#include <asm/sibyte/board.h>
+#include <asm/io.h>
+
+/*
+ * Macros for calculating offsets into config space given a device
+ * structure or dev/fun/reg
+ */
+#define CFGOFFSET(bus,devfn,where) (((bus)<<16)+((devfn)<<8)+(where))
+#define CFGADDR(bus,devfn,where) CFGOFFSET((bus)->number,(devfn),where)
+
+static void *cfg_space;
+
+#define PCI_BUS_ENABLED 1
+#define LDT_BUS_ENABLED 2
+#define PCI_DEVICE_MODE 4
+
+static int bcm1480_bus_status = 0;
+
+#define PCI_BRIDGE_DEVICE 0
+#define LDT_BRIDGE_DEVICE 1
+
+/*
+ * Read/write 32-bit values in config space.
+ */
+static inline u32 READCFG32(u32 addr)
+{
+ return *(u32 *)(cfg_space + (addr&~3));
+}
+
+static inline void WRITECFG32(u32 addr, u32 data)
+{
+ *(u32 *)(cfg_space + (addr & ~3)) = data;
+}
+
+int pcibios_map_irq(struct pci_dev *dev, u8 slot, u8 pin)
+{
+ return dev->irq;
+}
+
+/* Do platform specific device initialization at pci_enable_device() time */
+int pcibios_plat_dev_init(struct pci_dev *dev)
+{
+ return 0;
+}
+
+/*
+ * Some checks before doing config cycles:
+ * In PCI Device Mode, hide everything on bus 0 except the LDT host
+ * bridge. Otherwise, access is controlled by bridge MasterEn bits.
+ */
+static int bcm1480_pci_can_access(struct pci_bus *bus, int devfn)
+{
+ if (!(bcm1480_bus_status & (PCI_BUS_ENABLED | PCI_DEVICE_MODE)))
+ return 0;
+
+ if (bus->number == 0) {
+ if (bcm1480_bus_status & PCI_DEVICE_MODE)
+ return 0;
+ else
+ return 1;
+ } else
+ return 1;
+}
+
+/*
+ * Read/write access functions for various sizes of values
+ * in config space. Return all 1's for disallowed accesses
+ * for a kludgy but adequate simulation of master aborts.
+ */
+
+static int bcm1480_pcibios_read(struct pci_bus *bus, unsigned int devfn,
+ int where, int size, u32 * val)
+{
+ u32 data = 0;
+
+ if ((size == 2) && (where & 1))
+ return PCIBIOS_BAD_REGISTER_NUMBER;
+ else if ((size == 4) && (where & 3))
+ return PCIBIOS_BAD_REGISTER_NUMBER;
+
+ if (bcm1480_pci_can_access(bus, devfn))
+ data = READCFG32(CFGADDR(bus, devfn, where));
+ else
+ data = 0xFFFFFFFF;
+
+ if (size == 1)
+ *val = (data >> ((where & 3) << 3)) & 0xff;
+ else if (size == 2)
+ *val = (data >> ((where & 3) << 3)) & 0xffff;
+ else
+ *val = data;
+
+ return PCIBIOS_SUCCESSFUL;
+}
+
+static int bcm1480_pcibios_write(struct pci_bus *bus, unsigned int devfn,
+ int where, int size, u32 val)
+{
+ u32 cfgaddr = CFGADDR(bus, devfn, where);
+ u32 data = 0;
+
+ if ((size == 2) && (where & 1))
+ return PCIBIOS_BAD_REGISTER_NUMBER;
+ else if ((size == 4) && (where & 3))
+ return PCIBIOS_BAD_REGISTER_NUMBER;
+
+ if (!bcm1480_pci_can_access(bus, devfn))
+ return PCIBIOS_BAD_REGISTER_NUMBER;
+
+ data = READCFG32(cfgaddr);
+
+ if (size == 1)
+ data = (data & ~(0xff << ((where & 3) << 3))) |
+ (val << ((where & 3) << 3));
+ else if (size == 2)
+ data = (data & ~(0xffff << ((where & 3) << 3))) |
+ (val << ((where & 3) << 3));
+ else
+ data = val;
+
+ WRITECFG32(cfgaddr, data);
+
+ return PCIBIOS_SUCCESSFUL;
+}
+
+struct pci_ops bcm1480_pci_ops = {
+ bcm1480_pcibios_read,
+ bcm1480_pcibios_write,
+};
+
+static struct resource bcm1480_mem_resource = {
+ .name = "BCM1480 PCI MEM",
+ .start = 0x40000000UL,
+ .end = 0x5fffffffUL,
+ .flags = IORESOURCE_MEM,
+};
+
+static struct resource bcm1480_io_resource = {
+ .name = "BCM1480 PCI I/O",
+ .start = 0x00000000UL,
+ .end = 0x01ffffffUL,
+ .flags = IORESOURCE_IO,
+};
+
+struct pci_controller bcm1480_controller = {
+ .pci_ops = &bcm1480_pci_ops,
+ .mem_resource = &bcm1480_mem_resource,
+ .io_resource = &bcm1480_io_resource,
+};
+
+
+static int __init bcm1480_pcibios_init(void)
+{
+ uint32_t cmdreg;
+ uint64_t reg;
+ extern int pci_probe_only;
+
+ /* CFE will assign PCI resources */
+ pci_probe_only = 1;
+
+ /* Avoid ISA compat ranges. */
+ PCIBIOS_MIN_IO = 0x00008000UL;
+ PCIBIOS_MIN_MEM = 0x01000000UL;
+
+ /* Set I/O resource limits. */
+ ioport_resource.end = 0x01ffffffUL; /* 32MB accessible by bcm1480 */
+ iomem_resource.end = 0xffffffffUL; /* no HT support yet */
+
+ cfg_space = ioremap(A_BCM1480_PHYS_PCI_CFG_MATCH_BITS, 16*1024*1024);
+
+ /*
+ * See if the PCI bus has been configured by the firmware.
+ */
+ reg = *((volatile uint64_t *) IOADDR(A_SCD_SYSTEM_CFG));
+ if (!(reg & M_BCM1480_SYS_PCI_HOST)) {
+ bcm1480_bus_status |= PCI_DEVICE_MODE;
+ } else {
+ cmdreg = READCFG32(CFGOFFSET(0, PCI_DEVFN(PCI_BRIDGE_DEVICE, 0),
+ PCI_COMMAND));
+ if (!(cmdreg & PCI_COMMAND_MASTER)) {
+ printk
+ ("PCI: Skipping PCI probe. Bus is not initialized.\n");
+ iounmap(cfg_space);
+ return 1; /* XXX */
+ }
+ bcm1480_bus_status |= PCI_BUS_ENABLED;
+ }
+
+ /*
+ * Establish mappings in KSEG2 (kernel virtual) to PCI I/O
+ * space. Use "match bytes" policy to make everything look
+ * little-endian. So, you need to also set
+ * CONFIG_SWAP_IO_SPACE, but this is the combination that
+ * works correctly with most of Linux's drivers.
+ * XXX ehs: Should this happen in PCI Device mode?
+ */
+
+ set_io_port_base((unsigned long)
+ ioremap(A_BCM1480_PHYS_PCI_IO_MATCH_BYTES, 65536));
+ isa_slot_offset = (unsigned long)
+ ioremap(A_BCM1480_PHYS_PCI_MEM_MATCH_BYTES, 1024*1024);
+
+ register_pci_controller(&bcm1480_controller);
+
+#ifdef CONFIG_VGA_CONSOLE
+ take_over_console(&vga_con,0,MAX_NR_CONSOLES-1,1);
+#endif
+ return 0;
+}
+
+arch_initcall(bcm1480_pcibios_init);
^ permalink raw reply [flat|nested] 16+ messages in thread
* [PATCH 11/12] 1480-ht-support
2005-10-20 6:53 [PATCH 0/12] bcm1480 support Andrew Isaacson
` (9 preceding siblings ...)
2005-10-20 6:58 ` [PATCH 10/12] 1480-pci-support Andrew Isaacson
@ 2005-10-20 6:59 ` Andrew Isaacson
2005-10-20 6:59 ` [PATCH 12/12] pci-expmem-hack Andrew Isaacson
11 siblings, 0 replies; 16+ messages in thread
From: Andrew Isaacson @ 2005-10-20 6:59 UTC (permalink / raw)
To: linux-mips
PCI support code for PLX 7250 PCI-X tunnel on BCM91480B BigSur board.
Signed-Off-By: Andy Isaacson <adi@broadcom.com>
arch/mips/Kconfig | 1
arch/mips/pci/Makefile | 2
arch/mips/pci/pci-bcm1480.c | 21 ++-
arch/mips/pci/pci-bcm1480ht.c | 224 ++++++++++++++++++++++++++++++++++++++++++
arch/mips/pci/pci.c | 17 ++-
include/asm-mips/pci.h | 5
6 files changed, 253 insertions(+), 17 deletions(-)
Index: lmo/arch/mips/pci/pci-bcm1480.c
===================================================================
--- lmo.orig/arch/mips/pci/pci-bcm1480.c 2005-10-19 22:34:13.000000000 -0700
+++ lmo/arch/mips/pci/pci-bcm1480.c 2005-10-19 22:34:13.000000000 -0700
@@ -56,13 +56,11 @@
static void *cfg_space;
#define PCI_BUS_ENABLED 1
-#define LDT_BUS_ENABLED 2
-#define PCI_DEVICE_MODE 4
+#define PCI_DEVICE_MODE 2
static int bcm1480_bus_status = 0;
#define PCI_BRIDGE_DEVICE 0
-#define LDT_BRIDGE_DEVICE 1
/*
* Read/write 32-bit values in config space.
@@ -95,10 +93,13 @@
*/
static int bcm1480_pci_can_access(struct pci_bus *bus, int devfn)
{
+ u32 devno;
+
if (!(bcm1480_bus_status & (PCI_BUS_ENABLED | PCI_DEVICE_MODE)))
return 0;
if (bus->number == 0) {
+ devno = PCI_SLOT(devfn);
if (bcm1480_bus_status & PCI_DEVICE_MODE)
return 0;
else
@@ -175,15 +176,15 @@
static struct resource bcm1480_mem_resource = {
.name = "BCM1480 PCI MEM",
- .start = 0x40000000UL,
- .end = 0x5fffffffUL,
+ .start = 0x30000000UL,
+ .end = 0x3fffffffUL,
.flags = IORESOURCE_MEM,
};
static struct resource bcm1480_io_resource = {
.name = "BCM1480 PCI I/O",
- .start = 0x00000000UL,
- .end = 0x01ffffffUL,
+ .start = 0x2c000000UL,
+ .end = 0x2dffffffUL,
.flags = IORESOURCE_IO,
};
@@ -207,9 +208,9 @@
PCIBIOS_MIN_IO = 0x00008000UL;
PCIBIOS_MIN_MEM = 0x01000000UL;
- /* Set I/O resource limits. */
- ioport_resource.end = 0x01ffffffUL; /* 32MB accessible by bcm1480 */
- iomem_resource.end = 0xffffffffUL; /* no HT support yet */
+ /* Set I/O resource limits. - unlimited for now to accomodate HT */
+ ioport_resource.end = 0xffffffffUL;
+ iomem_resource.end = 0xffffffffUL;
cfg_space = ioremap(A_BCM1480_PHYS_PCI_CFG_MATCH_BITS, 16*1024*1024);
Index: lmo/arch/mips/Kconfig
===================================================================
--- lmo.orig/arch/mips/Kconfig 2005-10-19 22:34:12.000000000 -0700
+++ lmo/arch/mips/Kconfig 2005-10-19 22:34:13.000000000 -0700
@@ -552,6 +552,7 @@
select SWAP_IO_SPACE
select SYS_SUPPORTS_BIG_ENDIAN
select SYS_SUPPORTS_LITTLE_ENDIAN
+ select PCI_DOMAINS
config SIBYTE_SWARM
bool "Support for Sibyte BCM91250A-SWARM"
Index: lmo/arch/mips/pci/Makefile
===================================================================
--- lmo.orig/arch/mips/pci/Makefile 2005-10-19 22:34:13.000000000 -0700
+++ lmo/arch/mips/pci/Makefile 2005-10-19 22:34:13.000000000 -0700
@@ -46,7 +46,7 @@
obj-$(CONFIG_SGI_IP27) += pci-ip27.o
obj-$(CONFIG_SGI_IP32) += fixup-ip32.o ops-mace.o pci-ip32.o
obj-$(CONFIG_SIBYTE_SB1250) += fixup-sb1250.o pci-sb1250.o
-obj-$(CONFIG_SIBYTE_BCM1x80) += pci-bcm1480.o
+obj-$(CONFIG_SIBYTE_BCM1x80) += pci-bcm1480.o pci-bcm1480ht.o
obj-$(CONFIG_SNI_RM200_PCI) += fixup-sni.o ops-sni.o
obj-$(CONFIG_TANBAC_TB0219) += fixup-tb0219.o
obj-$(CONFIG_TANBAC_TB0226) += fixup-tb0226.o
Index: lmo/arch/mips/pci/pci-bcm1480ht.c
===================================================================
--- /dev/null 1970-01-01 00:00:00.000000000 +0000
+++ lmo/arch/mips/pci/pci-bcm1480ht.c 2005-10-19 22:34:13.000000000 -0700
@@ -0,0 +1,224 @@
+/*
+ * Copyright (C) 2001,2002,2005 Broadcom Corporation
+ * Copyright (C) 2004 by Ralf Baechle (ralf@linux-mips.org)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version 2
+ * of the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
+ */
+
+/*
+ * BCM1480/1455-specific HT support (looking like PCI)
+ *
+ * This module provides the glue between Linux's PCI subsystem
+ * and the hardware. We basically provide glue for accessing
+ * configuration space, and set up the translation for I/O
+ * space accesses.
+ *
+ * To access configuration space, we use ioremap. In the 32-bit
+ * kernel, this consumes either 4 or 8 page table pages, and 16MB of
+ * kernel mapped memory. Hopefully neither of these should be a huge
+ * problem.
+ *
+ */
+#include <linux/config.h>
+#include <linux/types.h>
+#include <linux/pci.h>
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/mm.h>
+#include <linux/console.h>
+#include <linux/tty.h>
+
+#include <asm/sibyte/bcm1480_regs.h>
+#include <asm/sibyte/bcm1480_scd.h>
+#include <asm/sibyte/board.h>
+#include <asm/io.h>
+
+/*
+ * Macros for calculating offsets into config space given a device
+ * structure or dev/fun/reg
+ */
+#define CFGOFFSET(bus,devfn,where) (((bus)<<16)+((devfn)<<8)+(where))
+#define CFGADDR(bus,devfn,where) CFGOFFSET((bus)->number,(devfn),where)
+
+static void *ht_cfg_space;
+
+#define PCI_BUS_ENABLED 1
+#define PCI_DEVICE_MODE 2
+
+static int bcm1480ht_bus_status = 0;
+
+#define PCI_BRIDGE_DEVICE 0
+#define HT_BRIDGE_DEVICE 1
+
+/*
+ * HT's level-sensitive interrupts require EOI, which is generated
+ * through a 4MB memory-mapped region
+ */
+unsigned long ht_eoi_space;
+
+/*
+ * Read/write 32-bit values in config space.
+ */
+static inline u32 READCFG32(u32 addr)
+{
+ return *(u32 *)(ht_cfg_space + (addr&~3));
+}
+
+static inline void WRITECFG32(u32 addr, u32 data)
+{
+ *(u32 *)(ht_cfg_space + (addr & ~3)) = data;
+}
+
+/*
+ * Some checks before doing config cycles:
+ * In PCI Device Mode, hide everything on bus 0 except the LDT host
+ * bridge. Otherwise, access is controlled by bridge MasterEn bits.
+ */
+static int bcm1480ht_can_access(struct pci_bus *bus, int devfn)
+{
+ u32 devno;
+
+ if (!(bcm1480ht_bus_status & (PCI_BUS_ENABLED | PCI_DEVICE_MODE)))
+ return 0;
+
+ if (bus->number == 0) {
+ devno = PCI_SLOT(devfn);
+ if (bcm1480ht_bus_status & PCI_DEVICE_MODE)
+ return 0;
+ }
+ return 1;
+}
+
+/*
+ * Read/write access functions for various sizes of values
+ * in config space. Return all 1's for disallowed accesses
+ * for a kludgy but adequate simulation of master aborts.
+ */
+
+static int bcm1480ht_pcibios_read(struct pci_bus *bus, unsigned int devfn,
+ int where, int size, u32 * val)
+{
+ u32 data = 0;
+
+ if ((size == 2) && (where & 1))
+ return PCIBIOS_BAD_REGISTER_NUMBER;
+ else if ((size == 4) && (where & 3))
+ return PCIBIOS_BAD_REGISTER_NUMBER;
+
+ if (bcm1480ht_can_access(bus, devfn))
+ data = READCFG32(CFGADDR(bus, devfn, where));
+ else
+ data = 0xFFFFFFFF;
+
+ if (size == 1)
+ *val = (data >> ((where & 3) << 3)) & 0xff;
+ else if (size == 2)
+ *val = (data >> ((where & 3) << 3)) & 0xffff;
+ else
+ *val = data;
+
+ return PCIBIOS_SUCCESSFUL;
+}
+
+static int bcm1480ht_pcibios_write(struct pci_bus *bus, unsigned int devfn,
+ int where, int size, u32 val)
+{
+ u32 cfgaddr = CFGADDR(bus, devfn, where);
+ u32 data = 0;
+
+ if ((size == 2) && (where & 1))
+ return PCIBIOS_BAD_REGISTER_NUMBER;
+ else if ((size == 4) && (where & 3))
+ return PCIBIOS_BAD_REGISTER_NUMBER;
+
+ if (!bcm1480ht_can_access(bus, devfn))
+ return PCIBIOS_BAD_REGISTER_NUMBER;
+
+ data = READCFG32(cfgaddr);
+
+ if (size == 1)
+ data = (data & ~(0xff << ((where & 3) << 3))) |
+ (val << ((where & 3) << 3));
+ else if (size == 2)
+ data = (data & ~(0xffff << ((where & 3) << 3))) |
+ (val << ((where & 3) << 3));
+ else
+ data = val;
+
+ WRITECFG32(cfgaddr, data);
+
+ return PCIBIOS_SUCCESSFUL;
+}
+
+static int bcm1480ht_pcibios_get_busno(void)
+{
+ return 0;
+}
+
+struct pci_ops bcm1480ht_pci_ops = {
+ .read = bcm1480ht_pcibios_read,
+ .write = bcm1480ht_pcibios_write,
+};
+
+static struct resource bcm1480ht_mem_resource = {
+ .name = "BCM1480 HT MEM",
+ .start = 0x40000000UL,
+ .end = 0x5fffffffUL,
+ .flags = IORESOURCE_MEM,
+};
+
+static struct resource bcm1480ht_io_resource = {
+ .name = "BCM1480 HT I/O",
+ .start = 0x00000000UL,
+ .end = 0x01ffffffUL,
+ .flags = IORESOURCE_IO,
+};
+
+struct pci_controller bcm1480ht_controller = {
+ .pci_ops = &bcm1480ht_pci_ops,
+ .mem_resource = &bcm1480ht_mem_resource,
+ .io_resource = &bcm1480ht_io_resource,
+ .index = 1,
+ .get_busno = bcm1480ht_pcibios_get_busno,
+};
+
+static int __init bcm1480ht_pcibios_init(void)
+{
+ uint32_t cmdreg;
+
+ ht_cfg_space = ioremap(A_BCM1480_PHYS_HT_CFG_MATCH_BITS, 16*1024*1024);
+
+ /*
+ * See if the PCI bus has been configured by the firmware.
+ */
+ cmdreg = READCFG32(CFGOFFSET(0, PCI_DEVFN(PCI_BRIDGE_DEVICE, 0),
+ PCI_COMMAND));
+ if (!(cmdreg & PCI_COMMAND_MASTER)) {
+ printk("HT: Skipping HT probe. Bus is not initialized.\n");
+ iounmap(ht_cfg_space);
+ return 1; /* XXX */
+ }
+ bcm1480ht_bus_status |= PCI_BUS_ENABLED;
+
+ ht_eoi_space = (unsigned long)
+ ioremap(A_BCM1480_PHYS_HT_SPECIAL_MATCH_BYTES,
+ 4 * 1024 * 1024);
+
+ register_pci_controller(&bcm1480ht_controller);
+
+ return 0;
+}
+
+arch_initcall(bcm1480ht_pcibios_init);
Index: lmo/arch/mips/pci/pci.c
===================================================================
--- lmo.orig/arch/mips/pci/pci.c 2005-10-19 22:34:07.000000000 -0700
+++ lmo/arch/mips/pci/pci.c 2005-10-19 22:34:13.000000000 -0700
@@ -127,15 +127,20 @@
if (!hose->iommu)
PCI_DMA_BUS_IS_PHYS = 1;
+ if (hose->get_busno && pci_probe_only)
+ next_busno = (*hose->get_busno)();
+
bus = pci_scan_bus(next_busno, hose->pci_ops, hose);
hose->bus = bus;
hose->need_domain_info = need_domain_info;
- next_busno = bus->subordinate + 1;
- /* Don't allow 8-bit bus number overflow inside the hose -
- reserve some space for bridges. */
- if (next_busno > 224) {
- next_busno = 0;
- need_domain_info = 1;
+ if (bus) {
+ next_busno = bus->subordinate + 1;
+ /* Don't allow 8-bit bus number overflow inside the hose -
+ reserve some space for bridges. */
+ if (next_busno > 224) {
+ next_busno = 0;
+ need_domain_info = 1;
+ }
}
continue;
Index: lmo/include/asm-mips/pci.h
===================================================================
--- lmo.orig/include/asm-mips/pci.h 2005-10-19 22:34:07.000000000 -0700
+++ lmo/include/asm-mips/pci.h 2005-10-19 22:34:13.000000000 -0700
@@ -40,6 +40,11 @@
unsigned int need_domain_info;
int iommu;
+
+ /* Optional access methods for reading/writing the bus number
+ of the PCI controller */
+ int (*get_busno)(void);
+ void (*set_busno)(int busno);
};
/*
^ permalink raw reply [flat|nested] 16+ messages in thread
* [PATCH 12/12] pci-expmem-hack
2005-10-20 6:53 [PATCH 0/12] bcm1480 support Andrew Isaacson
` (10 preceding siblings ...)
2005-10-20 6:59 ` [PATCH 11/12] 1480-ht-support Andrew Isaacson
@ 2005-10-20 6:59 ` Andrew Isaacson
11 siblings, 0 replies; 16+ messages in thread
From: Andrew Isaacson @ 2005-10-20 6:59 UTC (permalink / raw)
To: linux-mips
CFE 1.2.5 and earlier fails to turn on the ExpMemEn bit in the
PCIFeatureControl register, which means that DMA does not work
beyond physical address 01_0000_0000, ergo to DRAM beyond 1GB.
With ExpMemEn turned on, 01_0000_0000-0f_ffff_ffff is mapped,
so DMA works for up to 61 GB of DRAM.
Will be fixed in CFE 1.2.6 (yet to be released).
Signed-Off-By: Andy Isaacson <adi@broadcom.com>
arch/mips/pci/pci-bcm1480.c | 8 ++++++++
1 files changed, 8 insertions(+)
Index: lmo/arch/mips/pci/pci-bcm1480.c
===================================================================
--- lmo.orig/arch/mips/pci/pci-bcm1480.c 2005-10-19 22:34:13.000000000 -0700
+++ lmo/arch/mips/pci/pci-bcm1480.c 2005-10-19 22:34:13.000000000 -0700
@@ -232,6 +232,14 @@
bcm1480_bus_status |= PCI_BUS_ENABLED;
}
+ /* turn on ExpMemEn */
+ cmdreg = READCFG32(CFGOFFSET(0, PCI_DEVFN(PCI_BRIDGE_DEVICE, 0), 0x40));
+ printk("PCIFeatureCtrl = %x\n", cmdreg);
+ WRITECFG32(CFGOFFSET(0, PCI_DEVFN(PCI_BRIDGE_DEVICE, 0), 0x40),
+ cmdreg | 0x10);
+ cmdreg = READCFG32(CFGOFFSET(0, PCI_DEVFN(PCI_BRIDGE_DEVICE, 0), 0x40));
+ printk("PCIFeatureCtrl = %x\n", cmdreg);
+
/*
* Establish mappings in KSEG2 (kernel virtual) to PCI I/O
* space. Use "match bytes" policy to make everything look
^ permalink raw reply [flat|nested] 16+ messages in thread
* Re: [PATCH 8/12] cerr-printk-not-prom-printf
2005-10-20 6:57 ` [PATCH 8/12] cerr-printk-not-prom-printf Andrew Isaacson
@ 2005-10-20 10:49 ` Ralf Baechle
2005-10-20 11:02 ` Dominic Sweetman
0 siblings, 1 reply; 16+ messages in thread
From: Ralf Baechle @ 2005-10-20 10:49 UTC (permalink / raw)
To: Andrew Isaacson; +Cc: linux-mips
On Wed, Oct 19, 2005 at 11:57:57PM -0700, Andrew Isaacson wrote:
> Use printk rather than prom_printf in cache error handlers.
> prom_printf does not handle SMP locking, and shows up only
> on console (not in dmesg(1) or syslog).
This patch essentially reverses
http://www.linux-mips.org/git?p=linux.git;a=blobdiff;h=b2d41a2b0c406db6be87d02f51600e7e3013a748;hp=051290842231d9734d0bb2dc4c56b8590c4f5337;hb=760190d3f99ebabd965bd35324d5d084ff266711;f=arch/mips/mm/cerr-sb1.c
(Yuck, gitk URLs are bloody long ...)
The reason for this old commit was that this code is running uncached, so
the operation of ll/sc in the spinlocks is undefined according to the
MIPS64 spec, also there is a potencial deadlock since printk's
logbuf_lock might be held.
The old pass 1 part did truely exercise the cache error handler ;-)
Ralf
^ permalink raw reply [flat|nested] 16+ messages in thread
* Re: [PATCH 8/12] cerr-printk-not-prom-printf
2005-10-20 10:49 ` Ralf Baechle
@ 2005-10-20 11:02 ` Dominic Sweetman
2005-10-20 11:17 ` Ralf Baechle
0 siblings, 1 reply; 16+ messages in thread
From: Dominic Sweetman @ 2005-10-20 11:02 UTC (permalink / raw)
To: Ralf Baechle; +Cc: Andrew Isaacson, linux-mips
Ralf Baechle (ralf@linux-mips.org) writes:
> The reason for this old commit was that this code is running
> uncached, so the operation of ll/sc in the spinlocks is undefined
> according to the MIPS64 spec...
The answer is more complicated. MIPS64 (elsewhere) requires that the
ll/sc "link" is broken on an exceptin - in fact on an 'eret'
instruction.
So ll/sc on an uncached location works just fine in a uniprocessor.
However, it's unlikely that any cache-coherent mulitprocessor system
will snoop uncached reads and writes, so it won't work in an SMP
system.
--
Dominic
^ permalink raw reply [flat|nested] 16+ messages in thread
* Re: [PATCH 8/12] cerr-printk-not-prom-printf
2005-10-20 11:02 ` Dominic Sweetman
@ 2005-10-20 11:17 ` Ralf Baechle
0 siblings, 0 replies; 16+ messages in thread
From: Ralf Baechle @ 2005-10-20 11:17 UTC (permalink / raw)
To: Dominic Sweetman; +Cc: Andrew Isaacson, linux-mips
On Thu, Oct 20, 2005 at 12:02:33PM +0100, Dominic Sweetman wrote:
> > The reason for this old commit was that this code is running
> > uncached, so the operation of ll/sc in the spinlocks is undefined
> > according to the MIPS64 spec...
>
> The answer is more complicated. MIPS64 (elsewhere) requires that the
> ll/sc "link" is broken on an exceptin - in fact on an 'eret'
> instruction.
But in case of the code in question no eret will be executed between taking
the cache error exception and printk trying to take the lock.
> So ll/sc on an uncached location works just fine in a uniprocessor.
> However, it's unlikely that any cache-coherent mulitprocessor system
> will snoop uncached reads and writes, so it won't work in an SMP
> system.
Fine - but at that point we could have two processors messing with the
same buffers. Bad Thing (TM).
Ralf
^ permalink raw reply [flat|nested] 16+ messages in thread
end of thread, other threads:[~2005-10-20 11:17 UTC | newest]
Thread overview: 16+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2005-10-20 6:53 [PATCH 0/12] bcm1480 support Andrew Isaacson
2005-10-20 6:54 ` [PATCH 1/12] sibyte-fixes Andrew Isaacson
2005-10-20 6:55 ` [PATCH 2/12] 1480-headers Andrew Isaacson
2005-10-20 6:55 ` [PATCH 3/12] sibyte-header-cleanup Andrew Isaacson
2005-10-20 6:56 ` [PATCH 4/12] sb1a-support Andrew Isaacson
2005-10-20 6:56 ` [PATCH 5/12] 1480-support Andrew Isaacson
2005-10-20 6:57 ` [PATCH 6/12] bigsur-support Andrew Isaacson
2005-10-20 6:57 ` [PATCH 7/12] sb1-cache-exc-handling Andrew Isaacson
2005-10-20 6:57 ` [PATCH 8/12] cerr-printk-not-prom-printf Andrew Isaacson
2005-10-20 10:49 ` Ralf Baechle
2005-10-20 11:02 ` Dominic Sweetman
2005-10-20 11:17 ` Ralf Baechle
2005-10-20 6:58 ` [PATCH 9/12] sbmac-fixes Andrew Isaacson
2005-10-20 6:58 ` [PATCH 10/12] 1480-pci-support Andrew Isaacson
2005-10-20 6:59 ` [PATCH 11/12] 1480-ht-support Andrew Isaacson
2005-10-20 6:59 ` [PATCH 12/12] pci-expmem-hack Andrew Isaacson
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.