* 2.6 series kernels panic on boot at PCI probe with 450nx
@ 2005-11-05 0:07 Frank Overton
2005-11-05 4:30 ` Greg KH
0 siblings, 1 reply; 5+ messages in thread
From: Frank Overton @ 2005-11-05 0:07 UTC (permalink / raw)
To: linux-kernel
[1.] 2.6 series kernels panic on boot at PCI probe with 450nx (2.4.x kernels boot without hitch)
[2.] System: HP Netserver LH4s
[3.] Keywords: kernel, i450nx, PCI probe, boot, panic
[4.] Kernel version: 2.6.9-22, 2.6.9-11 by me and (2.6.6, 2.6.7 by Andrew Feldhacker)
[7.7.] For an additional example see: Andrew Feldhacker's June 2004 report at http://uwsg.ucs.indiana.edu/hypermail/linux/kernel/0407.0/0915.html
[X.] Other notes:
-Someone reported that Mandrake 10.2 beta did not have this problem.
-I know the legacy megaraid now requires a custom built kernel. I just can't get past the PCI-Probe to install it.
[7.] Environment
[7.2.] Processor information (from /proc/cpuinfo):
processor : 0
vendor_id : GenuineIntel
cpu family : 6
model : 7
model name : Pentium III (Katmai)
stepping : 3
cpu MHz : 550.045
cache size : 512 KB
physical id : 0
siblings : 1
runqueue : 0
fdiv_bug : no
hlt_bug : no
f00f_bug : no
coma_bug : no
fpu : yes
fpu_exception : yes
cpuid level : 2
wp : yes
flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 mmx fxsr sse
bogomips : 1097.72
processor : 1
vendor_id : GenuineIntel
cpu family : 6
model : 7
model name : Pentium III (Katmai)
stepping : 3
cpu MHz : 550.045
cache size : 512 KB
physical id : 0
siblings : 1
runqueue : 1
fdiv_bug : no
hlt_bug : no
f00f_bug : no
coma_bug : no
fpu : yes
fpu_exception : yes
cpuid level : 2
wp : yes
flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 mmx fxsr sse
bogomips : 1097.72
processor : 2
vendor_id : GenuineIntel
cpu family : 6
model : 7
model name : Pentium III (Katmai)
stepping : 3
cpu MHz : 550.045
cache size : 512 KB
physical id : 0
siblings : 1
runqueue : 2
fdiv_bug : no
hlt_bug : no
f00f_bug : no
coma_bug : no
fpu : yes
fpu_exception : yes
cpuid level : 2
wp : yes
flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 mmx fxsr sse
bogomips : 1097.72
processor : 3
vendor_id : GenuineIntel
cpu family : 6
model : 7
model name : Pentium III (Katmai)
stepping : 3
cpu MHz : 550.045
cache size : 512 KB
physical id : 0
siblings : 1
runqueue : 3
fdiv_bug : no
hlt_bug : no
f00f_bug : no
coma_bug : no
fpu : yes
fpu_exception : yes
cpuid level : 2
wp : yes
flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 mmx fxsr sse
bogomips : 1097.72
[7.3.] Module information (from /proc/modules):
ide-cd 34016 0 (autoclean)
cdrom 32896 0 (autoclean) [ide-cd]
qla2100 287804 5
iptable_filter 2412 0 (autoclean) (unused)
ip_tables 16544 1 [iptable_filter]
softdog 3004 1
usbserial 23964 0 (autoclean) (unused)
parport_pc 18884 1 (autoclean)
lp 9156 0 (autoclean)
parport 38848 1 (autoclean) [parport_pc lp]
autofs4 16984 0 (autoclean) (unused)
lock_gulm 65712 1
crc32 3764 0 [lock_gulm]
gfs 291308 1 (autoclean)
lock_harness 3576 0 (autoclean) [lock_gulm gfs]
pool 84928 4
natsemi 20000 1
e100 60048 1
floppy 57552 0 (autoclean)
sg 37388 0 (autoclean)
microcode 6912 0 (autoclean)
keybdev 2976 0 (unused)
mousedev 5688 1
hid 22308 0 (unused)
input 6176 0 [keybdev mousedev hid]
usbcore 81152 1 [usbserial hid]
ext3 89992 2
jbd 55092 2 [ext3]
megaraid 30636 3
sd_mod 13936 16
scsi_mod 115240 3 [qla2100 sg megaraid sd_mod]
[7.4.] Loaded driver and hardware information (/proc/ioports, /proc/iomem)
ioports
0000-001f : dma1
0020-003f : pic1
0040-005f : timer
0060-006f : keyboard
0070-007f : rtc
0080-008f : dma page reg
00a0-00bf : pic2
00c0-00df : dma2
00f0-00ff : fpu
01f0-01f7 : ide0
02f8-02ff : serial(auto)
0378-037a : parport0
03c0-03df : vga+
03f6-03f6 : ide0
03f8-03ff : serial(auto)
0cf8-0cff : PCI conf1
1040-105f : Intel Corp. 82371AB/EB/MB PIIX4 ACPI
1400-14ff : LSI Logic / Symbios Logic 53c895
8000-803f : Intel Corp. 82371AB/EB/MB PIIX4 ACPI
9000-901f : Intel Corp. 82371AB/EB/MB PIIX4 USB
9020-902f : Intel Corp. 82371AB/EB/MB PIIX4 IDE
9020-9027 : ide0
a000-afff : PCI Bus #01
a000-a0ff : LSI Logic / Symbios Logic 53c895 (#2)
b000-bfff : PCI Bus #02
b000-b0ff : National Semiconductor Corporation DP83815 (MacPhyter) Ethernet Controller
b000-b0ff : eth1
b400-b4ff : QLogic Corp. QLA2100 64-bit Fibre Channel Adapter
b400-b4ff : qla2100
b800-b81f : Intel Corp. 82557/8/9 [Ethernet Pro 100]
b800-b81f : e100
iomem
00000000-0009fbff : System RAM
0009fc00-0009ffff : reserved
000a0000-000bffff : Video RAM area
000c0000-000c7fff : Video ROM
000c8000-000c87ff : Extension ROM
000c8800-000c97ff : Extension ROM
000c9800-000c9fff : Extension ROM
000f0000-000fffff : System ROM
00100000-e7feffff : System RAM
00100000-002aba6e : Kernel code
002aba6f-003efb27 : Kernel data
e7ff0000-e7fffbff : ACPI Tables
e7fffc00-e7ffffff : ACPI Non-volatile Storage
e8000000-e8007fff : Hewlett-Packard Company NetServer Smart IRQ Router
e8008000-e8008fff : Cirrus Logic GD 5446
e8009000-e80090ff : LSI Logic / Symbios Logic 53c895
e800a000-e800afff : LSI Logic / Symbios Logic 53c895
e8100000-e81fffff : PCI Bus #01
e8100000-e8100fff : LSI Logic / Symbios Logic 53c895 (#2)
e8101000-e81010ff : LSI Logic / Symbios Logic 53c895 (#2)
e8200000-e83fffff : PCI Bus #02
e8200000-e82fffff : Intel Corp. 82557/8/9 [Ethernet Pro 100]
e8200000-e82fffff : e100
e8300000-e8300fff : National Semiconductor Corporation DP83815 (MacPhyter) Ethernet Controller
e8300000-e8300fff : eth1
e8301000-e8301fff : QLogic Corp. QLA2100 64-bit Fibre Channel Adapter
e8301000-e8301fff : qla2100
ea000000-ebffffff : Cirrus Logic GD 5446
f0000000-f7ffffff : Intel Corp. 80960RP [i960RP Microprocessor]
f0000000-f000007f : MegaRAID: LSI Logic Corporation
f8000000-f80fffff : PCI Bus #02
f8000000-f8000fff : Intel Corp. 82557/8/9 [Ethernet Pro 100]
f8000000-f8000fff : e100
fec00000-fec0ffff : reserved
fee00000-fee00fff : reserved
fffe8800-ffffffff : reserved
[7.5.] PCI information ('lspci -vvv' as root)
> 00:02.0 PCI bridge: Intel Corp. 80960RP [i960 RP
> Microprocessor/Bridge] (rev 03) (prog-if 00 [Normal decode]) Control:
> I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+ Stepping-
> SERR+ FastB2B- Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium
> >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 64, cache line size
> 08 Bus: primary=00, secondary=01, subordinate=01, sec-latency=248 I/O
> behind bridge: 0000a000-0000afff Memory behind bridge:
> e8100000-e81fffff Prefetchable memory behind bridge: fff00000-000fffff
> BridgeCtl: Parity+ SERR+ NoISA+ VGA- MAbort- >Reset- FastB2B- 00:02.1
> I2O: Intel Corp. 80960RP [i960RP Microprocessor] (rev 03) (prog-if 01)
> Subsystem: Hewlett-Packard Company MegaRAID T5, Integrated HP NetRAID
> Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr+
> Stepping- SERR+ FastB2B- Status: Cap- 66Mhz- UDF- FastB2B+ ParErr-
> DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 64,
> cache line size 08 Interrupt: pin A routed to IRQ 10 BIST result: 00
> Region 0: Memory at f0000000 (32-bit, prefetchable) [size=128M]
> Expansion ROM at <unassigned> [disabled] [size=32K] 00:03.0 PCI
> bridge: Digital Equipment Corporation DECchip 21152 (rev 02) (prog-if
> 00 [Normal decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV-
> VGASnoop- ParErr+ Stepping- SERR+ FastB2B- Status: Cap- 66Mhz- UDF-
> FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR-
> <PERR- Latency: 64, cache line size 08 Bus: primary=00, secondary=02,
> subordinate=02, sec-latency=234 I/O behind bridge: 0000b000-0000bfff
> Memory behind bridge: e8200000-e83fffff Prefetchable memory behind
> bridge: 00000000f8000000-00000000f8000000 BridgeCtl: Parity+ SERR+
> NoISA+ VGA- MAbort- >Reset- FastB2B- 00:06.0 System peripheral:
> Hewlett-Packard Company NetServer Smart IRQ Router (rev a0) Subsystem:
> Hewlett-Packard Company: Unknown device 0001 Control: I/O- Mem+
> BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr+ Stepping- SERR+
> FastB2B- Status: Cap- 66Mhz- UDF- FastB2B- ParErr- DEVSEL=slow
> >TAbort- <TAbort- <MAbort- >SERR- <PERR- Region 0: Memory at e8000000
> (32-bit, non-prefetchable) [size=32K] 00:08.0 VGA compatible
> controller: Cirrus Logic GD 5446 (rev 45) (prog-if 00 [VGA])
> Subsystem: Hewlett-Packard Company: Unknown device 0001 Control: I/O+
> Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR-
> FastB2B- Status: Cap- 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium
> >TAbort- <TAbort- <MAbort- >SERR- <PERR- Region 0: Memory at ea000000
> (32-bit, prefetchable) [size=32M] Region 1: Memory at e8008000
> (32-bit, non-prefetchable) [size=4K] Expansion ROM at <unassigned>
> [disabled] [size=32K] 00:0f.0 ISA bridge: Intel Corp. 82371AB/EB/MB
> PIIX4 ISA (rev 02) Control: I/O+ Mem+ BusMaster+ SpecCycle+ MemWINV-
> VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap- 66Mhz- UDF-
> FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR-
> <PERR- Latency: 0 00:0f.1 IDE interface: Intel Corp. 82371AB/EB/MB
> PIIX4 IDE (rev 01) (prog-if 80 [Master]) Control: I/O+ Mem- BusMaster+
> SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status:
> Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort-
> <MAbort- >SERR- <PERR- Latency: 64 Region 4: I/O ports at 9020
> [size=16] 00:0f.2 USB Controller: Intel Corp. 82371AB/EB/MB PIIX4 USB
> (rev 01) (prog-if 00 [UHCI]) Control: I/O+ Mem- BusMaster- SpecCycle-
> MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap-
> 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort-
> >SERR- <PERR- Interrupt: pin D routed to IRQ 0 Region 4: I/O ports at
> 9000 [size=32] 00:0f.3 Bridge: Intel Corp. 82371AB/EB/MB PIIX4 ACPI
> (rev 02) Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop-
> ParErr- Stepping- SERR- FastB2B- Status: Cap- 66Mhz- UDF- FastB2B+
> ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
> Interrupt: pin ? routed to IRQ 9 00:10.0 Host bridge: Intel Corp.
> 450NX - 82451NX Memory & I/O Controller (rev 03) Control: I/O- Mem-
> BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR-
> FastB2B- Status: Cap- 66Mhz- UDF- FastB2B- ParErr- DEVSEL=fast
> >TAbort- <TAbort- <MAbort- >SERR- <PERR- 00:12.0 Host bridge: Intel
> Corp. 450NX - 82454NX/84460GX PCI Expander Bridge (rev 02) Control:
> I/O- Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr+ Stepping-
> SERR+ FastB2B- Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium
> >TAbort- <TAbort- <MAbort+ >SERR- <PERR- Latency: 72, cache line size
> 08 01:07.0 SCSI storage controller: LSI Logic / Symbios Logic 53c895
> (rev 01) Subsystem: Hewlett-Packard Company: Unknown device 1000
> Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr+
> Stepping- SERR+ FastB2B- Status: Cap- 66Mhz- UDF- FastB2B- ParErr-
> DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 247
> (7500ns min, 16000ns max), cache line size 08 Interrupt: pin A routed
> to IRQ 11 Region 0: I/O ports at 1400 [size=256] Region 1: Memory at
> e8009000 (32-bit, non-prefetchable) [size=256] Region 2: Memory at
> e800a000 (32-bit, non-prefetchable) [size=4K] 01:07.0 SCSI storage
> controller: LSI Logic / Symbios Logic 53c895 (rev 01) Subsystem:
> Hewlett-Packard Company: Unknown device 1000 Control: I/O+ Mem+
> BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr+ Stepping- SERR+
> FastB2B- Status: Cap- 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium
> >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 247 (7500ns min,
> 16000ns max), cache line size 08 Interrupt: pin A routed to IRQ 11
> Region 0: I/O ports at a000 [size=256] Region 1: Memory at e8101000
> (32-bit, non-prefetchable) [size=256] Region 2: Memory at e8100000
> (32-bit, non-prefetchable) [size=4K] 02:02.0 Ethernet controller:
> Intel Corp. 82557/8/9 [Ethernet Pro 100] (rev 05) Subsystem:
> Hewlett-Packard Company NetServer 10/100TX Control: I/O+ Mem+
> BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr+ Stepping- SERR+
> FastB2B- Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium
> >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 66 (2000ns min,
> 14000ns max), cache line size 08 Interrupt: pin A routed to IRQ 15
> Region 0: Memory at f8000000 (32-bit, prefetchable) [size=4K] Region
> 1: I/O ports at b800 [size=32] Region 2: Memory at e8200000 (32-bit,
> non-prefetchable) [size=1M] Expansion ROM at <unassigned> [disabled]
> [size=1M] Capabilities: [dc] Power Management version 1 Flags: PMEClk-
> DSI+ D1+ D2+ AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold-) Status: D0
> PME-Enable- DSel=0 DScale=0 PME- 02:03.0 Ethernet controller: National
> Semiconductor Corporation DP83815 (MacPhyter) Ethernet Controller
> Subsystem: Netgear FA311 / FA312 (FA311 with WoL HW) Control: I/O+
> Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+ Stepping- SERR+
> FastB2B+ Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium
> >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 90 (2750ns min,
> 13000ns max) Interrupt: pin A routed to IRQ 5 Region 0: I/O ports at
> b000 [size=256] Region 1: Memory at e8300000 (32-bit,
> non-prefetchable) [size=4K] Expansion ROM at <unassigned> [disabled]
> [size=64K] Capabilities: [40] Power Management version 2 Flags:
> PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold-)
> Status: D0 PME-Enable- DSel=0 DScale=0 PME+ 02:04.0 SCSI storage
> controller: QLogic Corp. QLA2100 64-bit Fibre Channel Adapter (rev 03)
> Subsystem: QLogic Corp. QLA2100 64-bit Fibre Channel Adapter Control:
> I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr+ Stepping-
> SERR+ FastB2B- Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium
> >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 64, cache line size
> 08 Interrupt: pin A routed to IRQ 11 Region 0: I/O ports at b400
> [size=256] Region 1: Memory at e8301000 (32-bit, non-prefetchable)
> [size=4K] Expansion ROM at <unassigned> [disabled] [size=64K]
[7.6.] SCSI information (from /proc/scsi/scsi)
Host: scsi0 Channel: 00 Id: 00 Lun: 00
Vendor: MegaRAID Model: LD0 RAID1 8677R Rev: D
Type: Direct-Access ANSI SCSI revision: 02
Host: scsi2 Channel: 00 Id: 00 Lun: 00
Vendor: HP Model: FCArray 5_104196 Rev: 5549
Type: Direct-Access ANSI SCSI revision: 02
Host: scsi2 Channel: 00 Id: 00 Lun: 01
Vendor: HP Model: FCArray 5_69464 Rev: 5549
Type: Direct-Access ANSI SCSI revision: 02
Host: scsi2 Channel: 00 Id: 00 Lun: 02
Vendor: HP Model: FCArray 5_104196 Rev: 5549
Type: Direct-Access ANSI SCSI revision: 02
^ permalink raw reply [flat|nested] 5+ messages in thread
* Re: 2.6 series kernels panic on boot at PCI probe with 450nx
2005-11-05 0:07 2.6 series kernels panic on boot at PCI probe with 450nx Frank Overton
@ 2005-11-05 4:30 ` Greg KH
2005-11-07 17:27 ` Frank Overton
0 siblings, 1 reply; 5+ messages in thread
From: Greg KH @ 2005-11-05 4:30 UTC (permalink / raw)
To: Frank Overton; +Cc: linux-kernel
On Fri, Nov 04, 2005 at 04:07:23PM -0800, Frank Overton wrote:
> [1.] 2.6 series kernels panic on boot at PCI probe with 450nx (2.4.x
> kernels boot without hitch) [2.] System: HP Netserver LH4s
Can you post the oops message that you see?
thanks,
greg k-h
^ permalink raw reply [flat|nested] 5+ messages in thread
* Re: 2.6 series kernels panic on boot at PCI probe with 450nx
2005-11-05 4:30 ` Greg KH
@ 2005-11-07 17:27 ` Frank Overton
2005-11-07 18:22 ` Greg KH
0 siblings, 1 reply; 5+ messages in thread
From: Frank Overton @ 2005-11-07 17:27 UTC (permalink / raw)
To: Greg KH; +Cc: linux-kernel
Greg,
I don't know any good way to save the oops message. I'd love a pointer
on that.
Here is a hand copy of the oops message I am seeing.
-- top of screen --
c316d000 c3126240 00000000 00000000 c01de368 00000000 c31262b8
c3126240
Call Trace:
[<co23e390>] class_device_create_file+0x11/0x16
[<co1ddcaf>] pci_alloc_child_bus+0x74/0xb8
[<co1ddda5>] pci_scan_bridge+0x90/0x1cd
[<co1de368>] pci_scan_child_bus+0x51/0x77
[<co1de4c2>] pci_scan_bus_parented+0x11d/0x133
[<co29d3ec>] pci_bios_scan_root+0x3d/0x40
[<co208e00>] acpi_pci_root_add+0x19a/0x1f0
[<co20d825>] acpi_bus_driver_init+0x2c/0x8c
[<co20e019>] acpi_bus_find_driver+0x110/0x21a
[<co20e561>] acpi_bus_add+0x12c/0x152
[<co20e68b>] acpi_bus_scan+0x104/0x156
[<co3b7c7a>] acpi_bus_scan_init+0x48/0x5e
[<co3a86fa>] do_initcalls+0x49/0x8e
[<co100454>] init+0x0/0x1d8
[<co1041d5>] kernel_thread_helper+0x5/0xb
Code:
00 00 0f 8e 37 02 00 00 83 c4 14 5b 5e 5f 5d c3 53 89 c1 89 c1 89 d3 85
c0 74 12 83 78 30 00 0f 94 c2 85 db 0f 94 c0 09 d0 a8 01 74 08 <0f> 0b
7d 01 1b 5b 31 c0 8b 41 30 89 da b9 04 00 00 00 5b e9 47
<0> Fatal Exception: panic in 5 seconds
On Fri, 2005-11-04 at 20:30, Greg KH wrote:
> On Fri, Nov 04, 2005 at 04:07:23PM -0800, Frank Overton wrote:
> > [1.] 2.6 series kernels panic on boot at PCI probe with 450nx (2.4.x
> > kernels boot without hitch) [2.] System: HP Netserver LH4s
>
> Can you post the oops message that you see?
>
> thanks,
>
> greg k-h
>
^ permalink raw reply [flat|nested] 5+ messages in thread
* Re: 2.6 series kernels panic on boot at PCI probe with 450nx
2005-11-07 17:27 ` Frank Overton
@ 2005-11-07 18:22 ` Greg KH
2005-11-07 19:07 ` Arjan van de Ven
0 siblings, 1 reply; 5+ messages in thread
From: Greg KH @ 2005-11-07 18:22 UTC (permalink / raw)
To: Frank Overton; +Cc: linux-kernel
On Mon, Nov 07, 2005 at 09:27:11AM -0800, Frank Overton wrote:
> Greg,
>
> I don't know any good way to save the oops message. I'd love a pointer
> on that.
Serial console perhaps? There is documentation on how to do that in the
Documentation/ directory.
> Here is a hand copy of the oops message I am seeing.
>
> -- top of screen --
> c316d000 c3126240 00000000 00000000 c01de368 00000000 c31262b8
> c3126240
>
> Call Trace:
> [<co23e390>] class_device_create_file+0x11/0x16
> [<co1ddcaf>] pci_alloc_child_bus+0x74/0xb8
> [<co1ddda5>] pci_scan_bridge+0x90/0x1cd
> [<co1de368>] pci_scan_child_bus+0x51/0x77
> [<co1de4c2>] pci_scan_bus_parented+0x11d/0x133
> [<co29d3ec>] pci_bios_scan_root+0x3d/0x40
> [<co208e00>] acpi_pci_root_add+0x19a/0x1f0
> [<co20d825>] acpi_bus_driver_init+0x2c/0x8c
> [<co20e019>] acpi_bus_find_driver+0x110/0x21a
> [<co20e561>] acpi_bus_add+0x12c/0x152
> [<co20e68b>] acpi_bus_scan+0x104/0x156
> [<co3b7c7a>] acpi_bus_scan_init+0x48/0x5e
> [<co3a86fa>] do_initcalls+0x49/0x8e
> [<co100454>] init+0x0/0x1d8
> [<co1041d5>] kernel_thread_helper+0x5/0xb
Ugh, I really wish I knew which ddevice acpi was trying to add here. It
looks like it is addding 2 pci busses with the same address, which would
be very odd. How about creating a bug in bugzilla.kernel.org and
assigning it to the ACPI group? They should be able to figure it out :)
thanks,
greg k-h
^ permalink raw reply [flat|nested] 5+ messages in thread
* Re: 2.6 series kernels panic on boot at PCI probe with 450nx
2005-11-07 18:22 ` Greg KH
@ 2005-11-07 19:07 ` Arjan van de Ven
0 siblings, 0 replies; 5+ messages in thread
From: Arjan van de Ven @ 2005-11-07 19:07 UTC (permalink / raw)
To: Greg KH; +Cc: Frank Overton, linux-kernel
> Ugh, I really wish I knew which ddevice acpi was trying to add here. It
> looks like it is addding 2 pci busses with the same address, which would
> be very odd.
known bios bug in early 450nx bioses...
bios upgrade usually fixes that.
^ permalink raw reply [flat|nested] 5+ messages in thread
end of thread, other threads:[~2005-11-07 19:07 UTC | newest]
Thread overview: 5+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2005-11-05 0:07 2.6 series kernels panic on boot at PCI probe with 450nx Frank Overton
2005-11-05 4:30 ` Greg KH
2005-11-07 17:27 ` Frank Overton
2005-11-07 18:22 ` Greg KH
2005-11-07 19:07 ` Arjan van de Ven
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.