From: Greg KH <greg@kroah.com>
To: linux-kernel@vger.kernel.org
Subject: [RFC] Small PCI core patch
Date: Mon, 21 Nov 2005 14:53:03 -0800 [thread overview]
Message-ID: <20051121225303.GA19212@kroah.com> (raw)
Any objections to this?
thanks,
greg k-h
---------------------
Subject: PCI: fix up the exported symbols to be the proper license.
Signed-off-by: Greg Kroah-Hartman <greg@kroah.com>
---
drivers/pci/access.c | 12 +++++-----
drivers/pci/bus.c | 6 ++---
drivers/pci/msi.c | 8 +++---
drivers/pci/pci-acpi.c | 4 +--
drivers/pci/pci-driver.c | 16 ++++++-------
drivers/pci/pci.c | 54 +++++++++++++++++++++++------------------------
drivers/pci/probe.c | 14 ++++++------
drivers/pci/proc.c | 6 ++---
drivers/pci/quirks.c | 4 +--
drivers/pci/remove.c | 8 +++---
drivers/pci/rom.c | 8 +++---
drivers/pci/search.c | 20 ++++++++---------
drivers/pci/setup-bus.c | 6 ++---
13 files changed, 83 insertions(+), 83 deletions(-)
--- gregkh-2.6.orig/drivers/pci/access.c
+++ gregkh-2.6/drivers/pci/access.c
@@ -56,12 +56,12 @@ PCI_OP_WRITE(byte, u8, 1)
PCI_OP_WRITE(word, u16, 2)
PCI_OP_WRITE(dword, u32, 4)
-EXPORT_SYMBOL(pci_bus_read_config_byte);
-EXPORT_SYMBOL(pci_bus_read_config_word);
-EXPORT_SYMBOL(pci_bus_read_config_dword);
-EXPORT_SYMBOL(pci_bus_write_config_byte);
-EXPORT_SYMBOL(pci_bus_write_config_word);
-EXPORT_SYMBOL(pci_bus_write_config_dword);
+EXPORT_SYMBOL_GPL(pci_bus_read_config_byte);
+EXPORT_SYMBOL_GPL(pci_bus_read_config_word);
+EXPORT_SYMBOL_GPL(pci_bus_read_config_dword);
+EXPORT_SYMBOL_GPL(pci_bus_write_config_byte);
+EXPORT_SYMBOL_GPL(pci_bus_write_config_word);
+EXPORT_SYMBOL_GPL(pci_bus_write_config_dword);
static u32 pci_user_cached_config(struct pci_dev *dev, int pos)
{
--- gregkh-2.6.orig/drivers/pci/bus.c
+++ gregkh-2.6/drivers/pci/bus.c
@@ -199,7 +199,7 @@ void pci_walk_bus(struct pci_bus *top, v
}
EXPORT_SYMBOL_GPL(pci_walk_bus);
-EXPORT_SYMBOL(pci_bus_alloc_resource);
+EXPORT_SYMBOL_GPL(pci_bus_alloc_resource);
EXPORT_SYMBOL_GPL(pci_bus_add_device);
-EXPORT_SYMBOL(pci_bus_add_devices);
-EXPORT_SYMBOL(pci_enable_bridges);
+EXPORT_SYMBOL_GPL(pci_bus_add_devices);
+EXPORT_SYMBOL_GPL(pci_enable_bridges);
--- gregkh-2.6.orig/drivers/pci/msi.c
+++ gregkh-2.6/drivers/pci/msi.c
@@ -1119,7 +1119,7 @@ void msi_remove_pci_irq_vectors(struct p
}
}
-EXPORT_SYMBOL(pci_enable_msi);
-EXPORT_SYMBOL(pci_disable_msi);
-EXPORT_SYMBOL(pci_enable_msix);
-EXPORT_SYMBOL(pci_disable_msix);
+EXPORT_SYMBOL_GPL(pci_enable_msi);
+EXPORT_SYMBOL_GPL(pci_disable_msi);
+EXPORT_SYMBOL_GPL(pci_enable_msix);
+EXPORT_SYMBOL_GPL(pci_disable_msix);
--- gregkh-2.6.orig/drivers/pci/pci-acpi.c
+++ gregkh-2.6/drivers/pci/pci-acpi.c
@@ -174,7 +174,7 @@ acpi_status pci_osc_support_set(u32 flag
ctrlset_buf[OSC_CONTROL_TYPE] = temp;
return AE_OK;
}
-EXPORT_SYMBOL(pci_osc_support_set);
+EXPORT_SYMBOL_GPL(pci_osc_support_set);
/**
* pci_osc_control_set - commit requested control to Firmware
@@ -203,7 +203,7 @@ acpi_status pci_osc_control_set(acpi_han
return status;
}
-EXPORT_SYMBOL(pci_osc_control_set);
+EXPORT_SYMBOL_GPL(pci_osc_control_set);
/*
* _SxD returns the D-state with the highest power
--- gregkh-2.6.orig/drivers/pci/pci-driver.c
+++ gregkh-2.6/drivers/pci/pci-driver.c
@@ -525,11 +525,11 @@ static int __init pci_driver_init(void)
postcore_initcall(pci_driver_init);
-EXPORT_SYMBOL(pci_match_id);
-EXPORT_SYMBOL(pci_match_device);
-EXPORT_SYMBOL(__pci_register_driver);
-EXPORT_SYMBOL(pci_unregister_driver);
-EXPORT_SYMBOL(pci_dev_driver);
-EXPORT_SYMBOL(pci_bus_type);
-EXPORT_SYMBOL(pci_dev_get);
-EXPORT_SYMBOL(pci_dev_put);
+EXPORT_SYMBOL_GPL(pci_match_id);
+EXPORT_SYMBOL_GPL(pci_match_device);
+EXPORT_SYMBOL_GPL(__pci_register_driver);
+EXPORT_SYMBOL_GPL(pci_unregister_driver);
+EXPORT_SYMBOL_GPL(pci_dev_driver);
+EXPORT_SYMBOL_GPL(pci_bus_type);
+EXPORT_SYMBOL_GPL(pci_dev_get);
+EXPORT_SYMBOL_GPL(pci_dev_put);
--- gregkh-2.6.orig/drivers/pci/pci.c
+++ gregkh-2.6/drivers/pci/pci.c
@@ -425,7 +425,7 @@ pci_power_t pci_choose_state(struct pci_
return PCI_D0;
}
-EXPORT_SYMBOL(pci_choose_state);
+EXPORT_SYMBOL_GPL(pci_choose_state);
/**
* pci_save_state - save the PCI configuration space of a device before suspending
@@ -910,36 +910,36 @@ __setup("pci=", pci_setup);
#if defined(CONFIG_ISA) || defined(CONFIG_EISA)
/* FIXME: Some boxes have multiple ISA bridges! */
struct pci_dev *isa_bridge;
-EXPORT_SYMBOL(isa_bridge);
+EXPORT_SYMBOL_GPL(isa_bridge);
#endif
EXPORT_SYMBOL_GPL(pci_restore_bars);
-EXPORT_SYMBOL(pci_enable_device_bars);
-EXPORT_SYMBOL(pci_enable_device);
-EXPORT_SYMBOL(pci_disable_device);
-EXPORT_SYMBOL(pci_max_busnr);
-EXPORT_SYMBOL(pci_bus_max_busnr);
-EXPORT_SYMBOL(pci_find_capability);
-EXPORT_SYMBOL(pci_bus_find_capability);
-EXPORT_SYMBOL(pci_release_regions);
-EXPORT_SYMBOL(pci_request_regions);
-EXPORT_SYMBOL(pci_release_region);
-EXPORT_SYMBOL(pci_request_region);
-EXPORT_SYMBOL(pci_set_master);
-EXPORT_SYMBOL(pci_set_mwi);
-EXPORT_SYMBOL(pci_clear_mwi);
+EXPORT_SYMBOL_GPL(pci_enable_device_bars);
+EXPORT_SYMBOL_GPL(pci_enable_device);
+EXPORT_SYMBOL_GPL(pci_disable_device);
+EXPORT_SYMBOL_GPL(pci_max_busnr);
+EXPORT_SYMBOL_GPL(pci_bus_max_busnr);
+EXPORT_SYMBOL_GPL(pci_find_capability);
+EXPORT_SYMBOL_GPL(pci_bus_find_capability);
+EXPORT_SYMBOL_GPL(pci_release_regions);
+EXPORT_SYMBOL_GPL(pci_request_regions);
+EXPORT_SYMBOL_GPL(pci_release_region);
+EXPORT_SYMBOL_GPL(pci_request_region);
+EXPORT_SYMBOL_GPL(pci_set_master);
+EXPORT_SYMBOL_GPL(pci_set_mwi);
+EXPORT_SYMBOL_GPL(pci_clear_mwi);
EXPORT_SYMBOL_GPL(pci_intx);
-EXPORT_SYMBOL(pci_set_dma_mask);
-EXPORT_SYMBOL(pci_set_consistent_dma_mask);
-EXPORT_SYMBOL(pci_assign_resource);
-EXPORT_SYMBOL(pci_find_parent_resource);
-
-EXPORT_SYMBOL(pci_set_power_state);
-EXPORT_SYMBOL(pci_save_state);
-EXPORT_SYMBOL(pci_restore_state);
-EXPORT_SYMBOL(pci_enable_wake);
+EXPORT_SYMBOL_GPL(pci_set_dma_mask);
+EXPORT_SYMBOL_GPL(pci_set_consistent_dma_mask);
+EXPORT_SYMBOL_GPL(pci_assign_resource);
+EXPORT_SYMBOL_GPL(pci_find_parent_resource);
+
+EXPORT_SYMBOL_GPL(pci_set_power_state);
+EXPORT_SYMBOL_GPL(pci_save_state);
+EXPORT_SYMBOL_GPL(pci_restore_state);
+EXPORT_SYMBOL_GPL(pci_enable_wake);
/* Quirk info */
-EXPORT_SYMBOL(isa_dma_bridge_buggy);
-EXPORT_SYMBOL(pci_pci_problems);
+EXPORT_SYMBOL_GPL(isa_dma_bridge_buggy);
+EXPORT_SYMBOL_GPL(pci_pci_problems);
--- gregkh-2.6.orig/drivers/pci/probe.c
+++ gregkh-2.6/drivers/pci/probe.c
@@ -18,7 +18,7 @@
/* Ugh. Need to stop exporting this to modules. */
LIST_HEAD(pci_root_buses);
-EXPORT_SYMBOL(pci_root_buses);
+EXPORT_SYMBOL_GPL(pci_root_buses);
LIST_HEAD(pci_devices);
@@ -994,13 +994,13 @@ struct pci_bus * __devinit pci_scan_bus_
b->subordinate = pci_scan_child_bus(b);
return b;
}
-EXPORT_SYMBOL(pci_scan_bus_parented);
+EXPORT_SYMBOL_GPL(pci_scan_bus_parented);
#ifdef CONFIG_HOTPLUG
-EXPORT_SYMBOL(pci_add_new_bus);
-EXPORT_SYMBOL(pci_do_scan_bus);
-EXPORT_SYMBOL(pci_scan_slot);
-EXPORT_SYMBOL(pci_scan_bridge);
-EXPORT_SYMBOL(pci_scan_single_device);
+EXPORT_SYMBOL_GPL(pci_add_new_bus);
+EXPORT_SYMBOL_GPL(pci_do_scan_bus);
+EXPORT_SYMBOL_GPL(pci_scan_slot);
+EXPORT_SYMBOL_GPL(pci_scan_bridge);
+EXPORT_SYMBOL_GPL(pci_scan_single_device);
EXPORT_SYMBOL_GPL(pci_scan_child_bus);
#endif
--- gregkh-2.6.orig/drivers/pci/proc.c
+++ gregkh-2.6/drivers/pci/proc.c
@@ -611,8 +611,8 @@ static int __init pci_proc_init(void)
__initcall(pci_proc_init);
#ifdef CONFIG_HOTPLUG
-EXPORT_SYMBOL(pci_proc_attach_device);
-EXPORT_SYMBOL(pci_proc_attach_bus);
-EXPORT_SYMBOL(pci_proc_detach_bus);
+EXPORT_SYMBOL_GPL(pci_proc_attach_device);
+EXPORT_SYMBOL_GPL(pci_proc_attach_bus);
+EXPORT_SYMBOL_GPL(pci_proc_detach_bus);
#endif
--- gregkh-2.6.orig/drivers/pci/quirks.c
+++ gregkh-2.6/drivers/pci/quirks.c
@@ -1312,7 +1312,7 @@ void pci_fixup_device(enum pci_fixup_pas
pci_do_fixups(dev, start, end);
}
-EXPORT_SYMBOL(pcie_mch_quirk);
+EXPORT_SYMBOL_GPL(pcie_mch_quirk);
#ifdef CONFIG_HOTPLUG
-EXPORT_SYMBOL(pci_fixup_device);
+EXPORT_SYMBOL_GPL(pci_fixup_device);
#endif
--- gregkh-2.6.orig/drivers/pci/remove.c
+++ gregkh-2.6/drivers/pci/remove.c
@@ -55,7 +55,7 @@ int pci_remove_device_safe(struct pci_de
pci_destroy_dev(dev);
return 0;
}
-EXPORT_SYMBOL(pci_remove_device_safe);
+EXPORT_SYMBOL_GPL(pci_remove_device_safe);
void pci_remove_bus(struct pci_bus *pci_bus)
{
@@ -70,7 +70,7 @@ void pci_remove_bus(struct pci_bus *pci_
sysfs_remove_link(&pci_bus->class_dev.kobj, "bridge");
class_device_unregister(&pci_bus->class_dev);
}
-EXPORT_SYMBOL(pci_remove_bus);
+EXPORT_SYMBOL_GPL(pci_remove_bus);
/**
* pci_remove_bus_device - remove a PCI device and any children
@@ -118,5 +118,5 @@ void pci_remove_behind_bridge(struct pci
}
}
-EXPORT_SYMBOL(pci_remove_bus_device);
-EXPORT_SYMBOL(pci_remove_behind_bridge);
+EXPORT_SYMBOL_GPL(pci_remove_bus_device);
+EXPORT_SYMBOL_GPL(pci_remove_behind_bridge);
--- gregkh-2.6.orig/drivers/pci/rom.c
+++ gregkh-2.6/drivers/pci/rom.c
@@ -234,7 +234,7 @@ void pci_cleanup_rom(struct pci_dev *pde
}
}
-EXPORT_SYMBOL(pci_map_rom);
-EXPORT_SYMBOL(pci_map_rom_copy);
-EXPORT_SYMBOL(pci_unmap_rom);
-EXPORT_SYMBOL(pci_remove_rom);
+EXPORT_SYMBOL_GPL(pci_map_rom);
+EXPORT_SYMBOL_GPL(pci_map_rom_copy);
+EXPORT_SYMBOL_GPL(pci_unmap_rom);
+EXPORT_SYMBOL_GPL(pci_remove_rom);
--- gregkh-2.6.orig/drivers/pci/search.c
+++ gregkh-2.6/drivers/pci/search.c
@@ -376,14 +376,14 @@ exit:
spin_unlock(&pci_bus_lock);
return found;
}
-EXPORT_SYMBOL(pci_dev_present);
+EXPORT_SYMBOL_GPL(pci_dev_present);
-EXPORT_SYMBOL(pci_find_bus);
-EXPORT_SYMBOL(pci_find_next_bus);
-EXPORT_SYMBOL(pci_find_device);
-EXPORT_SYMBOL(pci_find_device_reverse);
-EXPORT_SYMBOL(pci_find_slot);
-EXPORT_SYMBOL(pci_get_device);
-EXPORT_SYMBOL(pci_get_subsys);
-EXPORT_SYMBOL(pci_get_slot);
-EXPORT_SYMBOL(pci_get_class);
+EXPORT_SYMBOL_GPL(pci_find_bus);
+EXPORT_SYMBOL_GPL(pci_find_next_bus);
+EXPORT_SYMBOL_GPL(pci_find_device);
+EXPORT_SYMBOL_GPL(pci_find_device_reverse);
+EXPORT_SYMBOL_GPL(pci_find_slot);
+EXPORT_SYMBOL_GPL(pci_get_device);
+EXPORT_SYMBOL_GPL(pci_get_subsys);
+EXPORT_SYMBOL_GPL(pci_get_slot);
+EXPORT_SYMBOL_GPL(pci_get_class);
--- gregkh-2.6.orig/drivers/pci/setup-bus.c
+++ gregkh-2.6/drivers/pci/setup-bus.c
@@ -129,7 +129,7 @@ void pci_setup_cardbus(struct pci_bus *b
region.end);
}
}
-EXPORT_SYMBOL(pci_setup_cardbus);
+EXPORT_SYMBOL_GPL(pci_setup_cardbus);
/* Initialize bridges with base/limit values we have collected.
PCI-to-PCI Bridge Architecture Specification rev. 1.1 (1998)
@@ -493,7 +493,7 @@ pci_bus_size_bridges(struct pci_bus *bus
break;
}
}
-EXPORT_SYMBOL(pci_bus_size_bridges);
+EXPORT_SYMBOL_GPL(pci_bus_size_bridges);
void __devinit
pci_bus_assign_resources(struct pci_bus *bus)
@@ -526,7 +526,7 @@ pci_bus_assign_resources(struct pci_bus
}
}
}
-EXPORT_SYMBOL(pci_bus_assign_resources);
+EXPORT_SYMBOL_GPL(pci_bus_assign_resources);
void __init
pci_assign_unassigned_resources(void)
next reply other threads:[~2005-11-21 23:04 UTC|newest]
Thread overview: 78+ messages / expand[flat|nested] mbox.gz Atom feed top
2005-11-21 22:53 Greg KH [this message]
2005-11-21 23:01 ` [RFC] Small PCI core patch Greg KH
2005-11-21 23:35 ` Benjamin Herrenschmidt
2005-11-22 0:47 ` Dave Airlie
2005-11-22 1:34 ` Alan Cox
2005-11-22 2:20 ` Jon Smirl
2005-11-22 2:36 ` Benjamin Herrenschmidt
2005-11-22 3:01 ` Jon Smirl
2005-11-22 7:41 ` Rob Landley
2005-11-22 8:44 ` Dave Airlie
2005-11-22 2:27 ` Benjamin Herrenschmidt
2005-11-22 3:23 ` Jon Smirl
2005-11-22 3:44 ` Benjamin Herrenschmidt
2005-11-22 4:11 ` Neil Brown
2005-11-22 8:07 ` Denis Vlasenko
2005-11-22 14:30 ` Jeff Garzik
2005-11-22 16:33 ` Rob Landley
2005-11-22 16:38 ` Jeff Garzik
2005-11-22 10:58 ` Florian Weimer
2005-11-22 19:28 ` Adrian Bunk
2005-11-23 15:46 ` Jesper Juhl
2005-11-24 2:11 ` Lee Revell
2005-11-22 15:46 ` Avi Kivity
2005-11-22 15:51 ` Jeff Garzik
2005-11-22 16:14 ` Avi Kivity
2005-11-22 16:25 ` Jeff Garzik
2005-11-22 16:40 ` Avi Kivity
2005-11-22 16:56 ` Jeff Garzik
2005-11-22 17:11 ` Avi Kivity
2005-11-22 17:37 ` Brian Gerst
2005-11-22 17:38 ` Jeff Garzik
2005-11-22 19:39 ` Avi Kivity
2005-11-23 10:51 ` Rogério Brito
2005-11-23 14:29 ` Alan Cox
2005-11-22 18:38 ` Alan Cox
2005-11-22 19:47 ` Avi Kivity
2005-11-22 16:26 ` Diego Calleja
2005-11-22 16:35 ` Avi Kivity
2005-11-22 19:49 ` Diego Calleja
2005-11-22 20:08 ` Avi Kivity
2005-11-22 20:15 ` Lee Revell
2005-11-22 20:43 ` Diego Calleja
2005-11-22 22:00 ` Avi Kivity
2005-11-22 22:42 ` Jan Knutar
2005-11-22 14:07 ` Marc Koschewski
2005-11-22 22:53 ` Benjamin Herrenschmidt
2005-11-22 23:06 ` Marc Koschewski
2005-11-22 23:20 ` Benjamin Herrenschmidt
2005-11-22 14:25 ` Alan Cox
2005-11-22 14:26 ` today's graphics (was Re: [RFC] Small PCI core patch) Jeff Garzik
2005-11-22 18:58 ` Alan Cox
2005-11-22 18:41 ` Jeff Garzik
2005-11-22 1:21 ` [RFC] Small PCI core patch Greg KH
2005-11-22 1:28 ` Chris Wedgwood
2005-11-22 1:42 ` Greg KH
2005-11-22 5:50 ` Arjan van de Ven
2005-11-22 14:36 ` Jeff Garzik
2005-11-22 16:54 ` Jon Smirl
2005-11-22 20:17 ` Alan Cox
2005-11-22 21:13 ` Brian Gerst
2005-11-22 23:26 ` Alan Cox
2005-11-22 22:59 ` Benjamin Herrenschmidt
2005-11-22 6:57 ` Rob Landley
2005-11-22 18:26 ` Matthieu CASTET
2005-11-22 19:05 ` Greg KH
2005-11-22 20:15 ` Alan Cox
2005-11-23 3:26 ` Andrew James Wade
2005-11-21 23:28 ` Jeff Garzik
2005-11-21 23:30 ` Benjamin Herrenschmidt
2005-11-22 17:50 ` Greg KH
2005-11-22 22:31 ` Harald Dunkel
2005-11-22 23:40 ` Alan Cox
2005-11-23 6:06 ` Harald Dunkel
2005-11-23 6:26 ` Dave Jones
2005-11-23 11:11 ` Alan Cox
[not found] <5bsXq-5uy-3@gated-at.bofh.it>
[not found] ` <5bsXq-5uy-1@gated-at.bofh.it>
[not found] ` <5btqF-66n-41@gated-at.bofh.it>
[not found] ` <5bzmg-66b-1@gated-at.bofh.it>
[not found] ` <5bHtG-228-23@gated-at.bofh.it>
2005-11-25 4:06 ` Robert Hancock
2005-11-25 6:34 ` Jeff Garzik
2005-11-25 13:54 ` Alan Cox
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20051121225303.GA19212@kroah.com \
--to=greg@kroah.com \
--cc=linux-kernel@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.