From: Andrea Arcangeli <andrea@suse.de>
To: Suleiman Souhlal <ssouhlal@FreeBSD.org>
Cc: Badari Pulavarty <pbadari@us.ibm.com>,
Andrew Morton <akpm@osdl.org>,
linux-kernel@vger.kernel.org, hugh@veritas.com,
dvhltc@us.ibm.com, linux-mm@kvack.org, blaisorblade@yahoo.it,
jdike@addtoit.com
Subject: Re: differences between MADV_FREE and MADV_DONTNEED
Date: Mon, 16 Jan 2006 18:24:49 +0100 [thread overview]
Message-ID: <20060116172449.GL15897@opteron.random> (raw)
In-Reply-To: <43CBD1C4.5020002@FreeBSD.org>
On Mon, Jan 16, 2006 at 09:03:00AM -0800, Suleiman Souhlal wrote:
> Andrea Arcangeli wrote:
>
> >We can also use it for the same purpose, we could add the pages to
> >swapcache mark them dirty and zap the ptes _after_ that.
>
> Wouldn't that cause the pages to get swapped out immediately?
Not really, it would be a non blocking operation. But they could be
swapped out shortly later (that's the whole point of DONTNEED, right?),
once there is more memory pressure. Otherwise if they're used again, a
minor fault will happen and it will find the swapcache uptodate in ram.
WARNING: multiple messages have this Message-ID (diff)
From: Andrea Arcangeli <andrea@suse.de>
To: Suleiman Souhlal <ssouhlal@FreeBSD.org>
Cc: Badari Pulavarty <pbadari@us.ibm.com>,
Andrew Morton <akpm@osdl.org>,
linux-kernel@vger.kernel.org, hugh@veritas.com,
dvhltc@us.ibm.com, linux-mm@kvack.org, blaisorblade@yahoo.it,
jdike@addtoit.com
Subject: Re: differences between MADV_FREE and MADV_DONTNEED
Date: Mon, 16 Jan 2006 18:24:49 +0100 [thread overview]
Message-ID: <20060116172449.GL15897@opteron.random> (raw)
In-Reply-To: <43CBD1C4.5020002@FreeBSD.org>
On Mon, Jan 16, 2006 at 09:03:00AM -0800, Suleiman Souhlal wrote:
> Andrea Arcangeli wrote:
>
> >We can also use it for the same purpose, we could add the pages to
> >swapcache mark them dirty and zap the ptes _after_ that.
>
> Wouldn't that cause the pages to get swapped out immediately?
Not really, it would be a non blocking operation. But they could be
swapped out shortly later (that's the whole point of DONTNEED, right?),
once there is more memory pressure. Otherwise if they're used again, a
minor fault will happen and it will find the swapcache uptodate in ram.
--
To unsubscribe, send a message with 'unsubscribe linux-mm' in
the body to majordomo@kvack.org. For more info on Linux MM,
see: http://www.linux-mm.org/ .
Don't email: <a href=mailto:"dont@kvack.org"> email@kvack.org </a>
next prev parent reply other threads:[~2006-01-16 17:24 UTC|newest]
Thread overview: 114+ messages / expand[flat|nested] mbox.gz Atom feed top
2005-10-26 22:49 [RFC] madvise(MADV_TRUNCATE) Badari Pulavarty
2005-10-27 8:38 ` Andi Kleen
2005-10-27 13:17 ` Andrea Arcangeli
2005-10-27 15:00 ` Badari Pulavarty
2005-10-27 15:11 ` Andrea Arcangeli
2005-10-27 18:20 ` Andrew Morton
2005-10-27 18:35 ` Badari Pulavarty
2005-10-27 18:50 ` Andrew Morton
2005-10-27 19:40 ` Gerrit Huizenga
2005-10-27 19:56 ` Andi Kleen
2005-10-27 23:21 ` Darren Hart
2005-10-27 20:05 ` Theodore Ts'o
2005-10-27 20:16 ` Andrea Arcangeli
2005-10-28 1:42 ` Badari Pulavarty
2005-10-28 16:33 ` Theodore Ts'o
2005-10-27 20:22 ` Jeff Dike
2005-10-27 20:04 ` Andrea Arcangeli
2005-10-27 20:50 ` Andrew Morton
2005-10-27 21:37 ` Andrea Arcangeli
2005-10-27 22:23 ` Andrew Morton
2005-10-27 23:05 ` Badari Pulavarty
2005-10-27 23:16 ` Andrew Morton
2005-10-27 23:33 ` Peter Chubb
2005-10-28 0:22 ` Andrea Arcangeli
2005-10-28 0:32 ` Andrew Morton
2005-10-28 1:10 ` Andrea Arcangeli
2005-10-28 1:27 ` Badari Pulavarty
2005-10-28 2:00 ` Andrew Morton
2005-10-27 22:32 ` Badari Pulavarty
2005-10-27 23:28 ` Peter Chubb
2005-10-27 23:49 ` Andrew Morton
2005-10-27 23:56 ` Nathan Scott
2005-10-28 0:15 ` Andrea Arcangeli
2005-10-27 23:59 ` Peter Chubb
2005-10-28 3:46 ` Jeff Dike
2005-10-28 11:03 ` Blaisorblade
2005-10-28 13:29 ` Andrea Arcangeli
2005-10-28 16:56 ` Blaisorblade
2005-10-28 16:16 ` Badari Pulavarty
2005-10-28 18:40 ` Blaisorblade
2005-10-28 18:56 ` Badari Pulavarty
2005-10-29 0:35 ` Badari Pulavarty
2005-10-28 16:19 ` Badari Pulavarty
2005-10-28 17:10 ` Blaisorblade
2005-10-28 18:28 ` Jeff Dike
2005-10-28 18:44 ` Blaisorblade
2005-10-28 18:42 ` Jeff Dike
2005-10-28 18:54 ` Badari Pulavarty
2005-10-29 0:03 ` Badari Pulavarty
2005-10-29 2:51 ` Jeff Dike
2005-10-31 16:34 ` Badari Pulavarty
2005-10-31 19:15 ` Badari Pulavarty
2005-10-31 19:49 ` [RFC][PATCH] madvise(MADV_TRUNCATE) Badari Pulavarty
2005-11-01 0:05 ` Jeff Dike
2005-11-02 1:15 ` [PATCH] 2.6.14 patch for supporting madvise(MADV_FREE) Badari Pulavarty
2005-11-02 1:43 ` Andrea Arcangeli
2005-11-02 1:43 ` Andrea Arcangeli
2005-11-02 15:49 ` Badari Pulavarty
2005-11-02 15:49 ` Badari Pulavarty
2005-11-02 16:12 ` [PATCH] 2.6.14 patch for supporting madvise(MADV_REMOVE) Badari Pulavarty
2005-11-02 19:54 ` New bug in patch and existing Linux code - race with install_page() (was: Re: [PATCH] 2.6.14 patch for supporting madvise(MADV_REMOVE)) Blaisorblade
2005-11-02 19:54 ` Blaisorblade
2005-11-02 20:12 ` Hugh Dickins
2005-11-02 20:12 ` Hugh Dickins
2005-11-02 20:45 ` Hugh Dickins
2005-11-02 20:45 ` Hugh Dickins
2005-11-02 21:36 ` Badari Pulavarty
2005-11-02 21:36 ` Badari Pulavarty
2005-11-02 21:55 ` Hugh Dickins
2005-11-02 21:55 ` Hugh Dickins
2005-11-02 22:02 ` Badari Pulavarty
2005-11-02 22:02 ` Badari Pulavarty
2005-11-12 0:25 ` [PATCH] 2.6.14 patch for supporting madvise(MADV_REMOVE) Andrew Morton
2005-11-12 0:25 ` Andrew Morton
2005-11-12 0:34 ` Badari Pulavarty
2005-11-12 0:34 ` Badari Pulavarty
2005-11-12 1:43 ` Andrew Morton
2005-11-12 1:43 ` Andrew Morton
2005-11-12 4:41 ` Badari Pulavarty
2005-11-12 4:41 ` Badari Pulavarty
2006-01-16 13:06 ` differences between MADV_FREE and MADV_DONTNEED Andrea Arcangeli
2006-01-16 13:06 ` Andrea Arcangeli
2006-01-16 16:02 ` Suleiman Souhlal
2006-01-16 16:02 ` Suleiman Souhlal
2006-01-16 16:28 ` Andrea Arcangeli
2006-01-16 16:28 ` Andrea Arcangeli
2006-01-16 17:03 ` Suleiman Souhlal
2006-01-16 17:03 ` Suleiman Souhlal
2006-01-16 17:24 ` Andrea Arcangeli [this message]
2006-01-16 17:24 ` Andrea Arcangeli
2006-01-16 21:43 ` Eric W. Biederman
2006-01-16 21:43 ` Eric W. Biederman
2006-01-17 0:24 ` Suleiman Souhlal
2006-01-17 0:24 ` Suleiman Souhlal
2006-01-17 1:04 ` Nicholas Miell
2006-01-17 1:04 ` Nicholas Miell
2006-01-17 12:43 ` Christoph Hellwig
2006-01-17 12:43 ` Christoph Hellwig
2006-01-17 18:23 ` Eric W. Biederman
2006-01-17 18:23 ` Eric W. Biederman
2006-01-17 22:55 ` Nicholas Miell
2006-01-17 22:55 ` Nicholas Miell
2007-03-01 18:11 ` Samuel Thibault
2007-03-01 18:11 ` Samuel Thibault
2006-01-17 19:06 ` Badari Pulavarty
2006-01-17 19:06 ` Badari Pulavarty
2006-01-17 1:06 ` Blaisorblade
2006-01-17 1:06 ` Blaisorblade
2006-01-17 1:33 ` Andrea Arcangeli
2006-01-17 1:33 ` Andrea Arcangeli
2005-11-12 0:34 ` [PATCH] 2.6.14 patch for supporting madvise(MADV_REMOVE) Andrew Morton
2005-11-12 0:34 ` Andrew Morton
2005-10-28 17:55 ` [RFC] madvise(MADV_TRUNCATE) Blaisorblade
2005-10-28 21:23 ` Theodore Ts'o
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20060116172449.GL15897@opteron.random \
--to=andrea@suse.de \
--cc=akpm@osdl.org \
--cc=blaisorblade@yahoo.it \
--cc=dvhltc@us.ibm.com \
--cc=hugh@veritas.com \
--cc=jdike@addtoit.com \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-mm@kvack.org \
--cc=pbadari@us.ibm.com \
--cc=ssouhlal@FreeBSD.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.