From: Martin Michlmayr <tbm@cyrius.com>
To: Takashi Iwai <tiwai@suse.de>
Cc: Atsushi Nemoto <anemo@mba.ocn.ne.jp>,
hugh@veritas.com, linux-kernel@vger.kernel.org,
t.sailer@alumni.ethz.ch, perex@suse.cz, ralf@linux-mips.org
Subject: Re: ALSA on MIPS platform
Date: Mon, 30 Jan 2006 15:46:17 +0000 [thread overview]
Message-ID: <20060130154617.GC15563@deprecation.cyrius.com> (raw)
In-Reply-To: <s5hoe1u3to1.wl%tiwai@suse.de>
* Takashi Iwai <tiwai@suse.de> [2006-01-30 11:18]:
> Well, as Hugu pointed out, that page reservation plays no longer any
> role. The patch below should work too on 2.6.15 or later.
It doesn't solve the problem I have, those "wait source ready timeout
0x1410 [0x8c8c8c8c]" messages on a Cobalt Qube2 with a 64-bit MIPS
kernel.
Detecting hardware: de4x5 via82cxxx es1371 usb_uhci
de4x5 disabled in configuration.
Skipping unavailable/built-in via82cxxx module.
Skipping unavailable/built-in es1371 module.
Loading uhci_hcd module.
usbcore: registered new driver usbfs
usbcore: registered new driver hub
USB Universal Host Controller Interface driver v2.3
uhci_hcd 0000:00:09.2: Found HC with no IRQ. Check BIOS/PCI 0000:00:09.2 setup!
uhci_hcd 0000:00:09.2: init 0000:00:09.2 fail, -19
Running 0dns-down to make sure resolv.conf is ok...done.
Setting up networking...done.
Starting hotplug subsystem:
pci
uhci-hcd: already loaded
wait source ready timeout 0x1410 [0x8c8c8c8c] <- repeated 180 times
AC'97 0 analog subsections not ready
wait source ready timeout 0x1410 [0x8c8c8c8c] <- repeated 453 times
snd-ens1371: loaded successfully
pci [success]
usb
usb [success]
isapnp
isapnp [success]
ide
ide [success]
input
input [success]
scsi
scsi [success]
done.
Setting up IP spoofing protection: rp_filter.
Configuring network interfaces...done.
Starting portmap daemon: portmap.
--
Martin Michlmayr
http://www.cyrius.com/
next prev parent reply other threads:[~2006-01-30 15:46 UTC|newest]
Thread overview: 37+ messages / expand[flat|nested] mbox.gz Atom feed top
2006-01-25 14:50 ALSA on MIPS platform Atsushi Nemoto
2006-01-25 19:03 ` Takashi Iwai
2006-01-26 15:29 ` Atsushi Nemoto
2006-01-26 16:02 ` Takashi Iwai
2006-01-26 19:19 ` Hugh Dickins
2006-01-27 15:45 ` Atsushi Nemoto
2006-01-27 15:49 ` Martin Michlmayr
2006-01-27 16:01 ` Takashi Iwai
2006-01-27 15:57 ` Takashi Iwai
2006-01-30 9:56 ` Atsushi Nemoto
2006-01-30 10:18 ` Takashi Iwai
2006-01-30 10:38 ` Atsushi Nemoto
2006-01-30 12:25 ` Ralf Baechle
2006-01-30 15:46 ` Martin Michlmayr [this message]
2006-01-30 15:52 ` Takashi Iwai
-- strict thread matches above, loose matches on Subject: below --
2007-08-01 7:56 Songmao Tian
2007-08-02 14:56 ` Atsushi Nemoto
2007-08-03 13:50 ` Songmao Tian
2007-08-03 13:50 ` Songmao Tian
2007-08-03 13:59 ` Takashi Iwai
2007-08-03 15:57 ` Songmao Tian
2007-08-06 12:17 ` Takashi Iwai
2007-08-07 5:53 ` Dajie Tan
2007-08-07 6:18 ` Dajie Tan
2007-08-07 14:01 ` Atsushi Nemoto
2007-08-07 17:54 ` Ralf Baechle
2007-08-07 17:54 ` Ralf Baechle
2007-08-07 18:41 ` Takashi Iwai
2007-08-07 18:41 ` Takashi Iwai
2007-08-08 11:58 ` Ralf Baechle
2007-08-08 11:58 ` Ralf Baechle
2007-08-08 12:40 ` Maciej W. Rozycki
2007-08-08 12:57 ` Takashi Iwai
2007-08-08 12:57 ` Takashi Iwai
2007-08-09 1:24 ` Songmao Tian
2007-08-09 1:24 ` Songmao Tian
2007-08-08 0:40 ` Songmao Tian
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20060130154617.GC15563@deprecation.cyrius.com \
--to=tbm@cyrius.com \
--cc=anemo@mba.ocn.ne.jp \
--cc=hugh@veritas.com \
--cc=linux-kernel@vger.kernel.org \
--cc=perex@suse.cz \
--cc=ralf@linux-mips.org \
--cc=t.sailer@alumni.ethz.ch \
--cc=tiwai@suse.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.