All of lore.kernel.org
 help / color / mirror / Atom feed
* Re:[parisc-linux] A sti 2.6.16-rc5-pa2 build failure?
@ 2006-03-20 11:19 Joel Soete
  2006-03-20 18:47 ` [parisc-linux] " Helge Deller
  0 siblings, 1 reply; 7+ messages in thread
From: Joel Soete @ 2006-03-20 11:19 UTC (permalink / raw)
  To: Helge Deller; +Cc: parisc-linux

Hello Helge,

> 
> Just a short report build failure of my custom kernel for my d380 (32bi=
t up):
>    ld   -o .tmp_vmlinux1 -T arch/parisc/kernel/vmlinux.lds
> arch/parisc/kernel/head.o   init/built-in.o --start-group  usr/built-in=
.o 
> arch/parisc/mm/built-in.o  arch/parisc/kernel/built-in.o 
> arch/parisc/math-emu/built-in.o arch/parisc/kernel/init_task.o 
> kernel/built-in.o  mm/built-in.o  fs/built-in.o  ipc/built-in.o 
> security/built-in.o  crypto/built-in.o  block/built-in.o  lib/lib.a 
> arch/parisc/lib/lib.a `gcc -print-libgcc-file-name`  lib/built-in.o 
> arch/parisc/lib/built-in.o `gcc -print-libgcc-file-name`  drivers/built=
-in.o 
> sound/built-in.o  net/built-in.o --end-group 
> drivers/built-in.o: In function `sti_rom_copy': undefined reference to
`gsc_readl'
> drivers/built-in.o: In function `sti_rom_copy': undefined reference to
`gsc_readl'
> drivers/built-in.o: In function `sti_rom_copy': undefined reference to
`gsc_readb'
> drivers/built-in.o: In function `sti_bmode_rom_copy': undefined referen=
ce to
> `gsc_readl'
> drivers/built-in.o: In function `sti_get_wmode_rom': undefined referenc=
e to
> `gsc_readl'
> drivers/built-in.o: In function `sti_try_rom_generic': undefined refere=
nce to
> `gsc_readl'
> drivers/built-in.o: In function `sti_try_rom_generic': undefined refere=
nce to
> `gsc_readl'
> drivers/built-in.o: In function `sti_try_rom_generic': undefined refere=
nce to
> `gsc_readl'
> drivers/built-in.o: more undefined references to `gsc_readl' follow
> drivers/built-in.o: In function `sti_try_rom_generic': undefined refere=
nce to
> `ioremap'
> drivers/built-in.o: In function `sti_try_rom_generic': undefined refere=
nce to
> `ioremap_nocache'
> make[1]: *** [.tmp_vmlinux1] Error 1
> make: *** [vmlinux] Error 2
> 
it seems that this reverting hunk:
--- drivers/video/sticore.h.Orig        2006-03-20 11:50:46.000000000 +01=
00
+++ drivers/video/sticore.h     2006-03-20 11:51:47.000000000 +0100
@@ -36,7 +36,7 @@
  
 #define STI_WAIT 1
 
-#include <linux/config.h> /* for CONFIG_HPPA_IOREMAP */
+#include <asm/io.h> /* for CONFIG_HPPA_IOREMAP */
 
 #ifdef CONFIG_HPPA_IOREMAP
 
=3D=3D=3D=3D<>=3D=3D=3D=3D

help (at least to rebuild this kernel).

If you agre, could you check in (I don't have cvs access)?

TIA,
    Joel=0A=0A-----------------------------------------------------------=
----=0AA free anti-spam and anti-virus filter on all Scarlet mailboxes=0A=
More info on http://www.scarlet.be/

^ permalink raw reply	[flat|nested] 7+ messages in thread
* Re: [parisc-linux] A sti 2.6.16-rc5-pa2 build failure?
@ 2006-03-20 22:01 Joel Soete
  0 siblings, 0 replies; 7+ messages in thread
From: Joel Soete @ 2006-03-20 22:01 UTC (permalink / raw)
  To: soete.joel; +Cc: deller, parisc-linux, tsg45800

Hello Helge,

Sorry in advance for anoying you but it still failed, here what I did (as=

usual, usual is not always a good ref but):
  1/ grab http://cvs.parisc-linux.org/download/linux-2.6/linux-2.6.16-pa0=
.tar.bz2

  2/ untar it into /usr/src,
  3/ create also a new dir /usr/src/linux-2.6-pa-d32up-n
  4/ cp the CustomConfigD380 /usr/src/linux-2.6-pa-d32up-n/.config
  5/ cd /usr/src/linux-2.6.16-pa0
  6/ export KBUILD_OUTPUT=3D"../linux-2.6-pa-d32up-n"
  7/ make oldconfig (eventualy keep a trace)
  8/ make V=3D1 vmlinux 
  9/ always failed on the same pb:
  ld   -o .tmp_vmlinux1 -T arch/parisc/kernel/vmlinux.lds
arch/parisc/kernel/head.o   init/built-in.o --start-group  usr/built-in.o=
 
arch/parisc/mm/built-in.o  arch/parisc/kernel/built-in.o 
arch/parisc/math-emu/built-in.o arch/parisc/kernel/init_task.o 
kernel/built-in.o  mm/built-in.o  fs/built-in.o  ipc/built-in.o 
security/built-in.o  crypto/built-in.o  block/built-in.o  lib/lib.a 
arch/parisc/lib/lib.a `gcc -print-libgcc-file-name`  lib/built-in.o 
arch/parisc/lib/built-in.o `gcc -print-libgcc-file-name`  drivers/built-i=
n.o 
sound/built-in.o  net/built-in.o --end-group 
drivers/built-in.o: In function `sti_rom_copy': undefined reference to `g=
sc_readl'
drivers/built-in.o: In function `sti_rom_copy': undefined reference to `g=
sc_readl'
drivers/built-in.o: In function `sti_rom_copy': undefined reference to `g=
sc_readb'
drivers/built-in.o: In function `sti_bmode_rom_copy': undefined reference=
 to
`gsc_readl'
drivers/built-in.o: In function `sti_get_wmode_rom': undefined reference =
to
`gsc_readl'
drivers/built-in.o: In function `sti_try_rom_generic': undefined referenc=
e to
`gsc_readl'
drivers/built-in.o: In function `sti_try_rom_generic': undefined referenc=
e to
`gsc_readl'
drivers/built-in.o: In function `sti_try_rom_generic': undefined referenc=
e to
`gsc_readl'
drivers/built-in.o: more undefined references to `gsc_readl' follow
drivers/built-in.o: In function `sti_try_rom_generic': undefined referenc=
e to
`ioremap'
drivers/built-in.o: In function `sti_try_rom_generic': undefined referenc=
e to
`ioremap_nocache'
make[1]: *** [.tmp_vmlinux1] Error 1
make: *** [vmlinux] Error 2

btw I was convience that restauring asm/io.h (i.e. asm-parisc/io.h) 
because it's where gsc_ are defined (but I not a guru and missed somethin=
g else).

Thanks again,
    Joel

PS: for this d380 I can remove this option because it never had any grafi=
c
cards but my c110 has one and use nearly the same config file.=0A=0A-----=
----------------------------------------------------------=0AA free anti-=
spam and anti-virus filter on all Scarlet mailboxes=0AMore info on http:/=
/www.scarlet.be/

^ permalink raw reply	[flat|nested] 7+ messages in thread
* Re: [parisc-linux] A sti 2.6.16-rc5-pa2 build failure?
@ 2006-03-20 20:46 Joel Soete
  0 siblings, 0 replies; 7+ messages in thread
From: Joel Soete @ 2006-03-20 20:46 UTC (permalink / raw)
  To: deller; +Cc: parisc-linux

> Hi Joel,
> 
> it builds for me...
> 
Strange but ...
> Helge
> 
> On Monday 20 March 2006 19:47, Helge Deller wrote:
> > Hi Joel,
> > 
> > did you tried a "make distclean", and "make oldconfig" ?
I just did a make clean (to save my .config) then the make oldconfig.
I just need to test again with distclean or from a clean dir (will advise=
).

> > And, are all your files up-to-date (cvs -z3 -q up) ?
No more cvs access but I grab the latest tarball 
(mmm but have the same pb at home with cvs src tree)

> > I'm wondering, since this header file does not do any IO...
> > 
though, I use to build my kernels into a output dir with KBUILD_OUPUT opt=
ion,
could it make the difference?

Thanks (I will come back asap),
    Joel
=0A=0A---------------------------------------------------------------=0AA=
 free anti-spam and anti-virus filter on all Scarlet mailboxes=0AMore inf=
o on http://www.scarlet.be/

^ permalink raw reply	[flat|nested] 7+ messages in thread
* [parisc-linux] A sti 2.6.16-rc5-pa2 build failure?
@ 2006-03-16  6:56 Joel Soete
  0 siblings, 0 replies; 7+ messages in thread
From: Joel Soete @ 2006-03-16  6:56 UTC (permalink / raw)
  To: parisc-linux

[-- Attachment #1: Type: text/plain, Size: 1948 bytes --]

Hello pa*,

Just a short report build failure of my custom kernel for my d380 (32bit up):
   ld   -o .tmp_vmlinux1 -T arch/parisc/kernel/vmlinux.lds
arch/parisc/kernel/head.o   init/built-in.o --start-group  usr/built-in.o
arch/parisc/mm/built-in.o  arch/parisc/kernel/built-in.o
arch/parisc/math-emu/built-in.o arch/parisc/kernel/init_task.o
kernel/built-in.o  mm/built-in.o  fs/built-in.o  ipc/built-in.o
security/built-in.o  crypto/built-in.o  block/built-in.o  lib/lib.a
arch/parisc/lib/lib.a `gcc -print-libgcc-file-name`  lib/built-in.o
arch/parisc/lib/built-in.o `gcc -print-libgcc-file-name`  drivers/built-in.o
sound/built-in.o  net/built-in.o --end-group
drivers/built-in.o: In function `sti_rom_copy': undefined reference to `gsc_readl'
drivers/built-in.o: In function `sti_rom_copy': undefined reference to `gsc_readl'
drivers/built-in.o: In function `sti_rom_copy': undefined reference to `gsc_readb'
drivers/built-in.o: In function `sti_bmode_rom_copy': undefined reference to
`gsc_readl'
drivers/built-in.o: In function `sti_get_wmode_rom': undefined reference to
`gsc_readl'
drivers/built-in.o: In function `sti_try_rom_generic': undefined reference to
`gsc_readl'
drivers/built-in.o: In function `sti_try_rom_generic': undefined reference to
`gsc_readl'
drivers/built-in.o: In function `sti_try_rom_generic': undefined reference to
`gsc_readl'
drivers/built-in.o: more undefined references to `gsc_readl' follow
drivers/built-in.o: In function `sti_try_rom_generic': undefined reference to
`ioremap'
drivers/built-in.o: In function `sti_try_rom_generic': undefined reference to
`ioremap_nocache'
make[1]: *** [.tmp_vmlinux1] Error 1
make: *** [vmlinux] Error 2

Any idea?

TIA,
    Joel

PS: I here attached my cfg file.



---------------------------------------------------------------
A free anti-spam and anti-virus filter on all Scarlet mailboxes
More info on http://www.scarlet.be/

[-- Attachment #2: CustomConfigD380 --]
[-- Type: application/octet-stream, Size: 18466 bytes --]

#
# Automatically generated make config: don't edit
# Linux kernel version: 2.6.16-rc6-paem2
# Wed Mar 15 16:07:47 2006
#
CONFIG_PARISC=y
CONFIG_MMU=y
CONFIG_STACK_GROWSUP=y
CONFIG_RWSEM_GENERIC_SPINLOCK=y
CONFIG_GENERIC_CALIBRATE_DELAY=y
CONFIG_GENERIC_HARDIRQS=y
CONFIG_GENERIC_IRQ_PROBE=y

#
# Code maturity level options
#
CONFIG_EXPERIMENTAL=y
CONFIG_BROKEN_ON_SMP=y
CONFIG_INIT_ENV_ARG_LIMIT=32

#
# General setup
#
CONFIG_LOCALVERSION="-d32up"
CONFIG_LOCALVERSION_AUTO=y
CONFIG_SWAP=y
CONFIG_SYSVIPC=y
# CONFIG_POSIX_MQUEUE is not set
# CONFIG_BSD_PROCESS_ACCT is not set
CONFIG_SYSCTL=y
# CONFIG_AUDIT is not set
CONFIG_IKCONFIG=y
CONFIG_IKCONFIG_PROC=y
CONFIG_INITRAMFS_SOURCE=""
# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
# CONFIG_EMBEDDED is not set
CONFIG_KALLSYMS=y
CONFIG_KALLSYMS_ALL=y
# CONFIG_KALLSYMS_EXTRA_PASS is not set
CONFIG_HOTPLUG=y
CONFIG_PRINTK=y
CONFIG_BUG=y
CONFIG_ELF_CORE=y
CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
CONFIG_EPOLL=y
CONFIG_SHMEM=y
CONFIG_CC_ALIGN_FUNCTIONS=0
CONFIG_CC_ALIGN_LABELS=0
CONFIG_CC_ALIGN_LOOPS=0
CONFIG_CC_ALIGN_JUMPS=0
CONFIG_SLAB=y
# CONFIG_TINY_SHMEM is not set
CONFIG_BASE_SMALL=0
# CONFIG_SLOB is not set

#
# Loadable module support
#
CONFIG_MODULES=y
CONFIG_MODULE_UNLOAD=y
CONFIG_MODULE_FORCE_UNLOAD=y
CONFIG_OBSOLETE_MODPARM=y
# CONFIG_MODVERSIONS is not set
# CONFIG_MODULE_SRCVERSION_ALL is not set
CONFIG_KMOD=y

#
# Block layer
#

#
# IO Schedulers
#
CONFIG_IOSCHED_NOOP=y
CONFIG_IOSCHED_AS=y
CONFIG_IOSCHED_DEADLINE=y
CONFIG_IOSCHED_CFQ=y
CONFIG_DEFAULT_AS=y
# CONFIG_DEFAULT_DEADLINE is not set
# CONFIG_DEFAULT_CFQ is not set
# CONFIG_DEFAULT_NOOP is not set
CONFIG_DEFAULT_IOSCHED="anticipatory"

#
# Processor type and features
#
# CONFIG_PA7000 is not set
# CONFIG_PA7100LC is not set
# CONFIG_PA7200 is not set
# CONFIG_PA7300LC is not set
CONFIG_PA8X00=y
CONFIG_PA20=y
CONFIG_PREFETCH=y
# CONFIG_64BIT is not set
CONFIG_HPPA_IOREMAP=y
# CONFIG_SMP is not set
CONFIG_ARCH_FLATMEM_ENABLE=y
# CONFIG_HZ_100 is not set
CONFIG_HZ_250=y
# CONFIG_HZ_1000 is not set
CONFIG_HZ=250
CONFIG_SELECT_MEMORY_MODEL=y
CONFIG_FLATMEM_MANUAL=y
# CONFIG_DISCONTIGMEM_MANUAL is not set
# CONFIG_SPARSEMEM_MANUAL is not set
CONFIG_FLATMEM=y
CONFIG_FLAT_NODE_MEM_MAP=y
# CONFIG_SPARSEMEM_STATIC is not set
CONFIG_SPLIT_PTLOCK_CPUS=4
# CONFIG_PREEMPT is not set
# CONFIG_HPUX is not set

#
# Bus options (PCI, PCMCIA, EISA, GSC, ISA)
#
CONFIG_GSC=y
# CONFIG_HPPB is not set
CONFIG_IOMMU_CCIO=y
CONFIG_GSC_LASI=y
CONFIG_GSC_WAX=y
CONFIG_EISA=y
CONFIG_EISA_NAMES=y
CONFIG_ISA=y
# CONFIG_PCI is not set

#
# PCCARD (PCMCIA/CardBus) support
#
# CONFIG_PCCARD is not set

#
# PCI Hotplug Support
#

#
# PA-RISC specific drivers
#
CONFIG_CHASSIS_LCD_LED=y
# CONFIG_PDC_CHASSIS is not set
CONFIG_PDC_STABLE=y

#
# Executable file formats
#
CONFIG_BINFMT_ELF=y
# CONFIG_BINFMT_MISC is not set

#
# Networking
#
CONFIG_NET=y

#
# Networking options
#
# CONFIG_NETDEBUG is not set
CONFIG_PACKET=y
CONFIG_PACKET_MMAP=y
CONFIG_UNIX=y
# CONFIG_NET_KEY is not set
CONFIG_INET=y
CONFIG_IP_MULTICAST=y
# CONFIG_IP_ADVANCED_ROUTER is not set
CONFIG_IP_FIB_HASH=y
CONFIG_IP_PNP=y
# CONFIG_IP_PNP_DHCP is not set
CONFIG_IP_PNP_BOOTP=y
# CONFIG_IP_PNP_RARP is not set
# CONFIG_NET_IPIP is not set
# CONFIG_NET_IPGRE is not set
# CONFIG_IP_MROUTE is not set
# CONFIG_ARPD is not set
# CONFIG_SYN_COOKIES is not set
# CONFIG_INET_AH is not set
# CONFIG_INET_ESP is not set
# CONFIG_INET_IPCOMP is not set
# CONFIG_INET_TUNNEL is not set
CONFIG_INET_DIAG=y
CONFIG_INET_TCP_DIAG=y
# CONFIG_TCP_CONG_ADVANCED is not set
CONFIG_TCP_CONG_BIC=y
CONFIG_IPV6=y
CONFIG_IPV6_PRIVACY=y
# CONFIG_INET6_AH is not set
# CONFIG_INET6_ESP is not set
# CONFIG_INET6_IPCOMP is not set
# CONFIG_INET6_TUNNEL is not set
# CONFIG_IPV6_TUNNEL is not set
# CONFIG_NETFILTER is not set

#
# DCCP Configuration (EXPERIMENTAL)
#
# CONFIG_IP_DCCP is not set

#
# SCTP Configuration (EXPERIMENTAL)
#
# CONFIG_IP_SCTP is not set

#
# TIPC Configuration (EXPERIMENTAL)
#
# CONFIG_TIPC is not set
# CONFIG_ATM is not set
# CONFIG_BRIDGE is not set
# CONFIG_VLAN_8021Q is not set
# CONFIG_DECNET is not set
# CONFIG_LLC2 is not set
# CONFIG_IPX is not set
# CONFIG_ATALK is not set
# CONFIG_X25 is not set
# CONFIG_LAPB is not set
# CONFIG_NET_DIVERT is not set
# CONFIG_ECONET is not set
# CONFIG_WAN_ROUTER is not set

#
# QoS and/or fair queueing
#
# CONFIG_NET_SCHED is not set

#
# Network testing
#
# CONFIG_NET_PKTGEN is not set
# CONFIG_HAMRADIO is not set
# CONFIG_IRDA is not set
# CONFIG_BT is not set
# CONFIG_IEEE80211 is not set

#
# Device Drivers
#

#
# Generic Driver Options
#
CONFIG_STANDALONE=y
CONFIG_PREVENT_FIRMWARE_BUILD=y
# CONFIG_FW_LOADER is not set
CONFIG_DEBUG_DRIVER=y

#
# Connector - unified userspace <-> kernelspace linker
#
# CONFIG_CONNECTOR is not set

#
# Memory Technology Devices (MTD)
#
# CONFIG_MTD is not set

#
# Parallel port support
#
CONFIG_PARPORT=y
CONFIG_PARPORT_PC=y
# CONFIG_PARPORT_PC_FIFO is not set
# CONFIG_PARPORT_PC_SUPERIO is not set
CONFIG_PARPORT_NOT_PC=y
CONFIG_PARPORT_GSC=y
# CONFIG_PARPORT_1284 is not set

#
# Plug and Play support
#
# CONFIG_PNP is not set

#
# Block devices
#
# CONFIG_PARIDE is not set
# CONFIG_BLK_DEV_COW_COMMON is not set
CONFIG_BLK_DEV_LOOP=y
CONFIG_BLK_DEV_CRYPTOLOOP=y
# CONFIG_BLK_DEV_NBD is not set
# CONFIG_BLK_DEV_RAM is not set
CONFIG_BLK_DEV_RAM_COUNT=16
# CONFIG_CDROM_PKTCDVD is not set
# CONFIG_ATA_OVER_ETH is not set

#
# ATA/ATAPI/MFM/RLL support
#
# CONFIG_IDE is not set

#
# SCSI device support
#
# CONFIG_RAID_ATTRS is not set
CONFIG_SCSI=y
CONFIG_SCSI_PROC_FS=y

#
# SCSI support type (disk, tape, CD-ROM)
#
CONFIG_BLK_DEV_SD=y
CONFIG_CHR_DEV_ST=y
# CONFIG_CHR_DEV_OSST is not set
CONFIG_BLK_DEV_SR=y
# CONFIG_BLK_DEV_SR_VENDOR is not set
CONFIG_CHR_DEV_SG=y
# CONFIG_CHR_DEV_SCH is not set

#
# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
#
# CONFIG_SCSI_MULTI_LUN is not set
# CONFIG_SCSI_CONSTANTS is not set
# CONFIG_SCSI_LOGGING is not set

#
# SCSI Transport Attributes
#
CONFIG_SCSI_SPI_ATTRS=y
# CONFIG_SCSI_FC_ATTRS is not set
# CONFIG_SCSI_ISCSI_ATTRS is not set
# CONFIG_SCSI_SAS_ATTRS is not set

#
# SCSI low-level drivers
#
# CONFIG_ISCSI_TCP is not set
# CONFIG_SCSI_AHA152X is not set
# CONFIG_SCSI_AHA1740 is not set
# CONFIG_SCSI_AIC7XXX is not set
# CONFIG_SCSI_AIC7XXX_OLD is not set
# CONFIG_SCSI_IN2000 is not set
# CONFIG_SCSI_SATA is not set
# CONFIG_SCSI_DTC3280 is not set
# CONFIG_SCSI_FUTURE_DOMAIN is not set
# CONFIG_SCSI_GENERIC_NCR5380 is not set
# CONFIG_SCSI_GENERIC_NCR5380_MMIO is not set
# CONFIG_SCSI_PPA is not set
# CONFIG_SCSI_IMM is not set
# CONFIG_SCSI_NCR53C406A is not set
CONFIG_SCSI_LASI700=y
CONFIG_53C700_LE_ON_BE=y
CONFIG_SCSI_ZALON=y
CONFIG_SCSI_NCR53C8XX_DEFAULT_TAGS=8
CONFIG_SCSI_NCR53C8XX_MAX_TAGS=32
CONFIG_SCSI_NCR53C8XX_SYNC=20
# CONFIG_SCSI_NCR53C8XX_PROFILE is not set
# CONFIG_SCSI_PAS16 is not set
# CONFIG_SCSI_PSI240I is not set
# CONFIG_SCSI_QLOGIC_FAS is not set
# CONFIG_SCSI_SIM710 is not set
# CONFIG_SCSI_SYM53C416 is not set
# CONFIG_SCSI_T128 is not set
# CONFIG_SCSI_DEBUG is not set

#
# Old CD-ROM drivers (not SCSI, not IDE)
#
# CONFIG_CD_NO_IDESCSI is not set

#
# Multi-device support (RAID and LVM)
#
CONFIG_MD=y
CONFIG_BLK_DEV_MD=y
CONFIG_MD_LINEAR=y
CONFIG_MD_RAID0=y
CONFIG_MD_RAID1=y
CONFIG_MD_RAID10=y
CONFIG_MD_RAID5=y
CONFIG_MD_RAID6=y
# CONFIG_MD_MULTIPATH is not set
# CONFIG_MD_FAULTY is not set
CONFIG_BLK_DEV_DM=y
# CONFIG_DM_CRYPT is not set
# CONFIG_DM_SNAPSHOT is not set
# CONFIG_DM_MIRROR is not set
# CONFIG_DM_ZERO is not set
# CONFIG_DM_MULTIPATH is not set

#
# Fusion MPT device support
#
# CONFIG_FUSION is not set

#
# IEEE 1394 (FireWire) support
#

#
# I2O device support
#

#
# Network device support
#
CONFIG_NETDEVICES=y
# CONFIG_DUMMY is not set
# CONFIG_BONDING is not set
# CONFIG_EQUALIZER is not set
# CONFIG_TUN is not set

#
# ARCnet devices
#
# CONFIG_ARCNET is not set

#
# PHY device support
#
# CONFIG_PHYLIB is not set

#
# Ethernet (10 or 100Mbit)
#
CONFIG_NET_ETHERNET=y
# CONFIG_MII is not set
CONFIG_LASI_82596=y
# CONFIG_NET_VENDOR_3COM is not set
# CONFIG_NET_VENDOR_SMC is not set
# CONFIG_NET_VENDOR_RACAL is not set

#
# Tulip family network device support
#
CONFIG_NET_TULIP=y
CONFIG_DE4X5=m
# CONFIG_AT1700 is not set
# CONFIG_DEPCA is not set
# CONFIG_HP100 is not set
# CONFIG_NET_ISA is not set
# CONFIG_NET_PCI is not set
# CONFIG_NET_POCKET is not set

#
# Ethernet (1000 Mbit)
#

#
# Ethernet (10000 Mbit)
#

#
# Token Ring devices
#
# CONFIG_TR is not set

#
# Wireless LAN (non-hamradio)
#
# CONFIG_NET_RADIO is not set

#
# Wan interfaces
#
# CONFIG_WAN is not set
# CONFIG_FDDI is not set
# CONFIG_PLIP is not set
CONFIG_PPP=m
# CONFIG_PPP_MULTILINK is not set
# CONFIG_PPP_FILTER is not set
# CONFIG_PPP_ASYNC is not set
# CONFIG_PPP_SYNC_TTY is not set
# CONFIG_PPP_DEFLATE is not set
# CONFIG_PPP_BSDCOMP is not set
# CONFIG_PPP_MPPE is not set
# CONFIG_PPPOE is not set
# CONFIG_SLIP is not set
# CONFIG_SHAPER is not set
# CONFIG_NETCONSOLE is not set
# CONFIG_NETPOLL is not set
# CONFIG_NET_POLL_CONTROLLER is not set

#
# ISDN subsystem
#
# CONFIG_ISDN is not set

#
# Telephony Support
#
# CONFIG_PHONE is not set

#
# Input device support
#
CONFIG_INPUT=y

#
# Userland interfaces
#
CONFIG_INPUT_MOUSEDEV=y
CONFIG_INPUT_MOUSEDEV_PSAUX=y
CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
# CONFIG_INPUT_JOYDEV is not set
# CONFIG_INPUT_TSDEV is not set
CONFIG_INPUT_EVDEV=y
# CONFIG_INPUT_EVBUG is not set

#
# Input Device Drivers
#
CONFIG_INPUT_KEYBOARD=y
# CONFIG_KEYBOARD_ATKBD is not set
# CONFIG_KEYBOARD_SUNKBD is not set
# CONFIG_KEYBOARD_LKKBD is not set
# CONFIG_KEYBOARD_XTKBD is not set
# CONFIG_KEYBOARD_NEWTON is not set
# CONFIG_KEYBOARD_HIL_OLD is not set
# CONFIG_KEYBOARD_HIL is not set
CONFIG_INPUT_MOUSE=y
# CONFIG_MOUSE_PS2 is not set
# CONFIG_MOUSE_SERIAL is not set
# CONFIG_MOUSE_INPORT is not set
# CONFIG_MOUSE_LOGIBM is not set
# CONFIG_MOUSE_PC110PAD is not set
# CONFIG_MOUSE_VSXXXAA is not set
# CONFIG_MOUSE_HIL is not set
# CONFIG_INPUT_JOYSTICK is not set
# CONFIG_INPUT_TOUCHSCREEN is not set
CONFIG_INPUT_MISC=y
# CONFIG_INPUT_UINPUT is not set
# CONFIG_HP_SDC_RTC is not set

#
# Hardware I/O ports
#
CONFIG_SERIO=y
# CONFIG_SERIO_SERPORT is not set
# CONFIG_SERIO_PARKBD is not set
CONFIG_SERIO_GSCPS2=y
# CONFIG_HP_SDC is not set
# CONFIG_SERIO_RAW is not set
# CONFIG_GAMEPORT is not set

#
# Character devices
#
CONFIG_VT=y
CONFIG_VT_CONSOLE=y
CONFIG_HW_CONSOLE=y
# CONFIG_SERIAL_NONSTANDARD is not set

#
# Serial drivers
#
CONFIG_SERIAL_8250=y
CONFIG_SERIAL_8250_CONSOLE=y
CONFIG_SERIAL_8250_NR_UARTS=13
CONFIG_SERIAL_8250_RUNTIME_UARTS=4
CONFIG_SERIAL_8250_EXTENDED=y
CONFIG_SERIAL_8250_MANY_PORTS=y
CONFIG_SERIAL_8250_SHARE_IRQ=y
# CONFIG_SERIAL_8250_DETECT_IRQ is not set
# CONFIG_SERIAL_8250_RSA is not set
# CONFIG_SERIAL_8250_FOURPORT is not set
# CONFIG_SERIAL_8250_ACCENT is not set
# CONFIG_SERIAL_8250_BOCA is not set
# CONFIG_SERIAL_8250_HUB6 is not set

#
# Non-8250 serial port support
#
CONFIG_SERIAL_MUX=y
CONFIG_SERIAL_MUX_CONSOLE=y
CONFIG_SERIAL_CORE=y
CONFIG_SERIAL_CORE_CONSOLE=y
CONFIG_UNIX98_PTYS=y
CONFIG_LEGACY_PTYS=y
CONFIG_LEGACY_PTY_COUNT=256
CONFIG_PRINTER=y
# CONFIG_LP_CONSOLE is not set
# CONFIG_PPDEV is not set
# CONFIG_TIPAR is not set

#
# IPMI
#
# CONFIG_IPMI_HANDLER is not set

#
# Watchdog Cards
#
# CONFIG_WATCHDOG is not set
CONFIG_GEN_RTC=y
# CONFIG_GEN_RTC_X is not set
# CONFIG_DTLK is not set
# CONFIG_R3964 is not set

#
# Ftape, the floppy tape device driver
#
# CONFIG_RAW_DRIVER is not set

#
# TPM devices
#
# CONFIG_TCG_TPM is not set
# CONFIG_TELCLOCK is not set

#
# I2C support
#
# CONFIG_I2C is not set

#
# SPI support
#
# CONFIG_SPI is not set
# CONFIG_SPI_MASTER is not set

#
# Dallas's 1-wire bus
#
# CONFIG_W1 is not set

#
# Hardware Monitoring support
#
CONFIG_HWMON=y
# CONFIG_HWMON_VID is not set
# CONFIG_SENSORS_F71805F is not set
# CONFIG_HWMON_DEBUG_CHIP is not set

#
# Misc devices
#

#
# Multimedia Capabilities Port drivers
#

#
# Multimedia devices
#
# CONFIG_VIDEO_DEV is not set

#
# Digital Video Broadcasting Devices
#
# CONFIG_DVB is not set

#
# Graphics support
#
CONFIG_FB=y
CONFIG_FB_CFB_FILLRECT=y
CONFIG_FB_CFB_COPYAREA=y
CONFIG_FB_CFB_IMAGEBLIT=y
# CONFIG_FB_MACMODES is not set
CONFIG_FB_MODE_HELPERS=y
# CONFIG_FB_TILEBLITTING is not set
CONFIG_FB_STI=y
# CONFIG_FB_S1D13XXX is not set
# CONFIG_FB_VIRTUAL is not set

#
# Console display driver support
#
CONFIG_DUMMY_CONSOLE=y
CONFIG_DUMMY_CONSOLE_COLUMNS=160
CONFIG_DUMMY_CONSOLE_ROWS=64
CONFIG_FRAMEBUFFER_CONSOLE=y
# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set
CONFIG_STI_CONSOLE=y
# CONFIG_FONTS is not set
CONFIG_FONT_8x8=y
CONFIG_FONT_8x16=y

#
# Logo configuration
#
# CONFIG_LOGO is not set
# CONFIG_BACKLIGHT_LCD_SUPPORT is not set

#
# Sound
#
# CONFIG_SOUND is not set

#
# USB support
#
# CONFIG_USB_ARCH_HAS_HCD is not set
# CONFIG_USB_ARCH_HAS_OHCI is not set

#
# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
#

#
# USB Gadget Support
#
# CONFIG_USB_GADGET is not set

#
# MMC/SD Card support
#
# CONFIG_MMC is not set

#
# InfiniBand support
#

#
# EDAC - error detection and reporting (RAS) (EXPERIMENTAL)
#

#
# File systems
#
CONFIG_EXT2_FS=y
# CONFIG_EXT2_FS_XATTR is not set
# CONFIG_EXT2_FS_XIP is not set
CONFIG_EXT3_FS=y
# CONFIG_EXT3_FS_XATTR is not set
CONFIG_JBD=y
# CONFIG_JBD_DEBUG is not set
# CONFIG_REISERFS_FS is not set
# CONFIG_JFS_FS is not set
# CONFIG_FS_POSIX_ACL is not set
# CONFIG_XFS_FS is not set
# CONFIG_OCFS2_FS is not set
# CONFIG_MINIX_FS is not set
# CONFIG_ROMFS_FS is not set
CONFIG_INOTIFY=y
# CONFIG_QUOTA is not set
CONFIG_DNOTIFY=y
# CONFIG_AUTOFS_FS is not set
# CONFIG_AUTOFS4_FS is not set
# CONFIG_FUSE_FS is not set

#
# CD-ROM/DVD Filesystems
#
CONFIG_ISO9660_FS=y
CONFIG_JOLIET=y
# CONFIG_ZISOFS is not set
# CONFIG_UDF_FS is not set

#
# DOS/FAT/NT Filesystems
#
# CONFIG_MSDOS_FS is not set
# CONFIG_VFAT_FS is not set
# CONFIG_NTFS_FS is not set

#
# Pseudo filesystems
#
CONFIG_PROC_FS=y
CONFIG_PROC_KCORE=y
CONFIG_SYSFS=y
CONFIG_TMPFS=y
# CONFIG_HUGETLB_PAGE is not set
CONFIG_RAMFS=y
CONFIG_RELAYFS_FS=y
# CONFIG_CONFIGFS_FS is not set

#
# Miscellaneous filesystems
#
# CONFIG_ADFS_FS is not set
# CONFIG_AFFS_FS is not set
# CONFIG_HFS_FS is not set
# CONFIG_HFSPLUS_FS is not set
# CONFIG_BEFS_FS is not set
# CONFIG_BFS_FS is not set
# CONFIG_EFS_FS is not set
# CONFIG_CRAMFS is not set
# CONFIG_VXFS_FS is not set
# CONFIG_HPFS_FS is not set
# CONFIG_QNX4FS_FS is not set
# CONFIG_SYSV_FS is not set
# CONFIG_UFS_FS is not set

#
# Network File Systems
#
CONFIG_NFS_FS=y
CONFIG_NFS_V3=y
# CONFIG_NFS_V3_ACL is not set
# CONFIG_NFS_V4 is not set
# CONFIG_NFS_DIRECTIO is not set
CONFIG_NFSD=y
CONFIG_NFSD_V3=y
# CONFIG_NFSD_V3_ACL is not set
# CONFIG_NFSD_V4 is not set
CONFIG_NFSD_TCP=y
CONFIG_ROOT_NFS=y
CONFIG_LOCKD=y
CONFIG_LOCKD_V4=y
CONFIG_EXPORTFS=y
CONFIG_NFS_COMMON=y
CONFIG_SUNRPC=y
# CONFIG_RPCSEC_GSS_KRB5 is not set
# CONFIG_RPCSEC_GSS_SPKM3 is not set
# CONFIG_SMB_FS is not set
# CONFIG_CIFS is not set
# CONFIG_NCP_FS is not set
# CONFIG_CODA_FS is not set
# CONFIG_AFS_FS is not set
# CONFIG_9P_FS is not set

#
# Partition Types
#
# CONFIG_PARTITION_ADVANCED is not set
CONFIG_MSDOS_PARTITION=y

#
# Native Language Support
#
CONFIG_NLS=y
CONFIG_NLS_DEFAULT="iso8859-1"
# CONFIG_NLS_CODEPAGE_437 is not set
# CONFIG_NLS_CODEPAGE_737 is not set
# CONFIG_NLS_CODEPAGE_775 is not set
# CONFIG_NLS_CODEPAGE_850 is not set
# CONFIG_NLS_CODEPAGE_852 is not set
# CONFIG_NLS_CODEPAGE_855 is not set
# CONFIG_NLS_CODEPAGE_857 is not set
# CONFIG_NLS_CODEPAGE_860 is not set
# CONFIG_NLS_CODEPAGE_861 is not set
# CONFIG_NLS_CODEPAGE_862 is not set
# CONFIG_NLS_CODEPAGE_863 is not set
# CONFIG_NLS_CODEPAGE_864 is not set
# CONFIG_NLS_CODEPAGE_865 is not set
# CONFIG_NLS_CODEPAGE_866 is not set
# CONFIG_NLS_CODEPAGE_869 is not set
# CONFIG_NLS_CODEPAGE_936 is not set
# CONFIG_NLS_CODEPAGE_950 is not set
# CONFIG_NLS_CODEPAGE_932 is not set
# CONFIG_NLS_CODEPAGE_949 is not set
# CONFIG_NLS_CODEPAGE_874 is not set
# CONFIG_NLS_ISO8859_8 is not set
# CONFIG_NLS_CODEPAGE_1250 is not set
# CONFIG_NLS_CODEPAGE_1251 is not set
# CONFIG_NLS_ASCII is not set
# CONFIG_NLS_ISO8859_1 is not set
# CONFIG_NLS_ISO8859_2 is not set
# CONFIG_NLS_ISO8859_3 is not set
# CONFIG_NLS_ISO8859_4 is not set
# CONFIG_NLS_ISO8859_5 is not set
# CONFIG_NLS_ISO8859_6 is not set
# CONFIG_NLS_ISO8859_7 is not set
# CONFIG_NLS_ISO8859_9 is not set
# CONFIG_NLS_ISO8859_13 is not set
# CONFIG_NLS_ISO8859_14 is not set
# CONFIG_NLS_ISO8859_15 is not set
# CONFIG_NLS_KOI8_R is not set
# CONFIG_NLS_KOI8_U is not set
# CONFIG_NLS_UTF8 is not set

#
# Profiling support
#
# CONFIG_PROFILING is not set

#
# Kernel hacking
#
# CONFIG_PRINTK_TIME is not set
CONFIG_MAGIC_SYSRQ=y
CONFIG_DEBUG_KERNEL=y
CONFIG_LOG_BUF_SHIFT=16
CONFIG_DETECT_SOFTLOCKUP=y
# CONFIG_SCHEDSTATS is not set
# CONFIG_DEBUG_SLAB is not set
# CONFIG_DEBUG_MUTEXES is not set
# CONFIG_DEBUG_SPINLOCK is not set
# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
# CONFIG_DEBUG_KOBJECT is not set
# CONFIG_DEBUG_INFO is not set
# CONFIG_DEBUG_IOREMAP is not set
# CONFIG_DEBUG_FS is not set
# CONFIG_DEBUG_VM is not set
CONFIG_FORCED_INLINING=y
# CONFIG_RCU_TORTURE_TEST is not set
# CONFIG_DEBUG_RODATA is not set

#
# Security options
#
# CONFIG_KEYS is not set
CONFIG_SECURITY=y
# CONFIG_SECURITY_NETWORK is not set
CONFIG_SECURITY_CAPABILITIES=y
# CONFIG_SECURITY_SECLVL is not set

#
# Cryptographic options
#
CONFIG_CRYPTO=y
# CONFIG_CRYPTO_HMAC is not set
# CONFIG_CRYPTO_NULL is not set
# CONFIG_CRYPTO_MD4 is not set
CONFIG_CRYPTO_MD5=y
# CONFIG_CRYPTO_SHA1 is not set
# CONFIG_CRYPTO_SHA256 is not set
# CONFIG_CRYPTO_SHA512 is not set
# CONFIG_CRYPTO_WP512 is not set
# CONFIG_CRYPTO_TGR192 is not set
# CONFIG_CRYPTO_DES is not set
# CONFIG_CRYPTO_BLOWFISH is not set
# CONFIG_CRYPTO_TWOFISH is not set
# CONFIG_CRYPTO_SERPENT is not set
# CONFIG_CRYPTO_AES is not set
# CONFIG_CRYPTO_CAST5 is not set
# CONFIG_CRYPTO_CAST6 is not set
# CONFIG_CRYPTO_TEA is not set
# CONFIG_CRYPTO_ARC4 is not set
# CONFIG_CRYPTO_KHAZAD is not set
# CONFIG_CRYPTO_ANUBIS is not set
# CONFIG_CRYPTO_DEFLATE is not set
# CONFIG_CRYPTO_MICHAEL_MIC is not set
# CONFIG_CRYPTO_CRC32C is not set
# CONFIG_CRYPTO_TEST is not set

#
# Hardware crypto devices
#

#
# Library routines
#
# CONFIG_CRC_CCITT is not set
CONFIG_CRC16=m
CONFIG_CRC32=y
# CONFIG_LIBCRC32C is not set

[-- Attachment #3: Type: text/plain, Size: 169 bytes --]

_______________________________________________
parisc-linux mailing list
parisc-linux@lists.parisc-linux.org
http://lists.parisc-linux.org/mailman/listinfo/parisc-linux

^ permalink raw reply	[flat|nested] 7+ messages in thread
end of thread, other threads:[~2006-03-20 22:40 UTC | newest]

Thread overview: 7+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2006-03-20 11:19 Re:[parisc-linux] A sti 2.6.16-rc5-pa2 build failure? Joel Soete
2006-03-20 18:47 ` [parisc-linux] " Helge Deller
2006-03-20 19:42   ` Helge Deller
2006-03-20 22:40     ` Matthew Wilcox
  -- strict thread matches above, loose matches on Subject: below --
2006-03-20 22:01 Joel Soete
2006-03-20 20:46 Joel Soete
2006-03-16  6:56 Joel Soete

This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.