From: Nathan Lynch <ntl@pobox.com>
To: Markus Rothe <markus@unixforces.net>
Cc: linuxppc-dev@ozlabs.org, linux-kernel@vger.kernel.org
Subject: Re: Oops: mounting floppy disk on PPC64 (power3)
Date: Fri, 31 Mar 2006 16:50:34 -0600 [thread overview]
Message-ID: <20060331225034.GA25663@localdomain> (raw)
In-Reply-To: <200603312138.16032.markus@unixforces.net>
Hello.
Markus Rothe wrote:
>
> this is kernel 2.6.16.1 compiled with gcc 4.1.0 (gentoo patches). I never
> tried to mount a floppy on this system before, so I don't know if it Oops'ed
> in previous kernel versions, too.
>
> power3 ~ # uname -a
> Linux power3 2.6.16.1 #1 Fri Mar 31 21:08:43 UTC 2006 ppc64 POWER3 (630+) CHRP
> IBM,7044-170 GNU/Linux
> power3 ~ # modprobe floppy
> power3 ~ # mount /mnt/floppy/
> Oops: Kernel access of bad area, sig: 11 [#1]
> NUMA PSERIES
> Modules linked in: floppy
> NIP: C0000000000201E8 LR: D0000000000C43A4 CTR: C0000000000201D8
> REGS: c0000000003df470 TRAP: 0300 Not tainted (2.6.16.1)
> MSR: A000000000001032 <ME,IR,DR> CR: 48000082 XER: 00000000
> DAR: 0000000000000178, DSISR: 0000000040000000
> TASK = c0000000003fc9b0[0] 'swapper' THREAD: c0000000003dc000
> GPR00: C00000000042FC08 C0000000003DF6F0 C0000000004D3310 0000000000000000
> GPR04: C00000000161D000 0000000000000400 0000000000000002 0000000000000750
> GPR08: 0000000000000064 D0000000000D4AE0 D0000000000D5F20 C0000000000201D8
> GPR12: D0000000000CB280 C0000000003FCF80 0000000000000000 0000000000000000
> GPR16: 0000000000000000 0000000000000000 4000000001400000 C0000000003595E0
> GPR20: C0000000003D1F28 00000000017D1A80 C0000000003D1A80 0000000000000060
> GPR24: 00000000000003F0 A000000000009032 0000000000000044 00000000000000D9
> GPR28: 0000000000000400 0000000000000002 D0000000000DB880 C00000000161D000
> NIP [C0000000000201E8] .dma_map_single+0x10/0x70
> LR [D0000000000C43A4] .setup_rw_floppy+0x2c0/0xaa8 [floppy]
> Call Trace:
> [C0000000003DF6F0] [D0000000000C5790] .start_motor+0x108/0x158 [floppy]
> (unreli)
> [C0000000003DF760] [D0000000000C43A4] .setup_rw_floppy+0x2c0/0xaa8 [floppy]
> [C0000000003DF810] [C000000000044714] .run_timer_softirq+0x174/0x20c
> [C0000000003DF8B0] [C00000000003FC68] .__do_softirq+0x80/0x128
> [C0000000003DF940] [C00000000003FD5C] .do_softirq+0x4c/0x68
> [C0000000003DF9C0] [C00000000001C9E8] .timer_interrupt+0x360/0x388
> [C0000000003DFA90] [C0000000000034B8] decrementer_common+0xb8/0x100
> --- Exception: 901 at .ppc64_runlatch_off+0x0/0x50
> LR = .default_idle+0x48/0x70
> [C0000000003DFD80] [C000000000016764] .default_idle+0x68/0x70 (unreliable)
> [C0000000003DFE00] [C0000000000166E8] .cpu_idle+0x40/0x54
> [C0000000003DFE70] [C0000000000092B0] .rest_init+0x3c/0x54
> [C0000000003DFEF0] [C0000000003B16D4] .start_kernel+0x1f0/0x208
> [C0000000003DFF90] [C000000000008514] .start_here_common+0x88/0x174
> Instruction dump:
> 4e800421 e8410028 48000008 0fe00000 38210070 e8010010 7c0803a6 4e800020
> 7c0802a6 f8010010 f821ff91 e80298d0 <e9230178> 7fa90000 409e000c e92298d8
>
> Am I doing something wrong?
Nope.
I believe this was fixed in Linus' tree as of a couple days ago:
diff-tree b239cbe957ae730caa8af2f169a4d35b8c1bb299 (from
69ed3324983bb937d78a857Author: Stephen Rothwell <sfr@canb.auug.org.au>
Date: Tue Mar 28 14:40:58 2006 +1100
[PATCH] powerpc: make ISA floppies work again
We used to assume that a DMA mapping request with a NULL dev was
for
ISA DMA. This assumption was broken at some point. Now we
explicitly
pass the detected ISA PCI device in the floppy setup.
Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Paul Mackerras <paulus@samba.org>
Maybe you could verify with latest -git, or 2.6.17-rc1 when it's
released?
WARNING: multiple messages have this Message-ID (diff)
From: Nathan Lynch <ntl@pobox.com>
To: Markus Rothe <markus@unixforces.net>
Cc: linux-kernel@vger.kernel.org, linuxppc-dev@ozlabs.org
Subject: Re: Oops: mounting floppy disk on PPC64 (power3)
Date: Fri, 31 Mar 2006 16:50:34 -0600 [thread overview]
Message-ID: <20060331225034.GA25663@localdomain> (raw)
In-Reply-To: <200603312138.16032.markus@unixforces.net>
Hello.
Markus Rothe wrote:
>
> this is kernel 2.6.16.1 compiled with gcc 4.1.0 (gentoo patches). I never
> tried to mount a floppy on this system before, so I don't know if it Oops'ed
> in previous kernel versions, too.
>
> power3 ~ # uname -a
> Linux power3 2.6.16.1 #1 Fri Mar 31 21:08:43 UTC 2006 ppc64 POWER3 (630+) CHRP
> IBM,7044-170 GNU/Linux
> power3 ~ # modprobe floppy
> power3 ~ # mount /mnt/floppy/
> Oops: Kernel access of bad area, sig: 11 [#1]
> NUMA PSERIES
> Modules linked in: floppy
> NIP: C0000000000201E8 LR: D0000000000C43A4 CTR: C0000000000201D8
> REGS: c0000000003df470 TRAP: 0300 Not tainted (2.6.16.1)
> MSR: A000000000001032 <ME,IR,DR> CR: 48000082 XER: 00000000
> DAR: 0000000000000178, DSISR: 0000000040000000
> TASK = c0000000003fc9b0[0] 'swapper' THREAD: c0000000003dc000
> GPR00: C00000000042FC08 C0000000003DF6F0 C0000000004D3310 0000000000000000
> GPR04: C00000000161D000 0000000000000400 0000000000000002 0000000000000750
> GPR08: 0000000000000064 D0000000000D4AE0 D0000000000D5F20 C0000000000201D8
> GPR12: D0000000000CB280 C0000000003FCF80 0000000000000000 0000000000000000
> GPR16: 0000000000000000 0000000000000000 4000000001400000 C0000000003595E0
> GPR20: C0000000003D1F28 00000000017D1A80 C0000000003D1A80 0000000000000060
> GPR24: 00000000000003F0 A000000000009032 0000000000000044 00000000000000D9
> GPR28: 0000000000000400 0000000000000002 D0000000000DB880 C00000000161D000
> NIP [C0000000000201E8] .dma_map_single+0x10/0x70
> LR [D0000000000C43A4] .setup_rw_floppy+0x2c0/0xaa8 [floppy]
> Call Trace:
> [C0000000003DF6F0] [D0000000000C5790] .start_motor+0x108/0x158 [floppy]
> (unreli)
> [C0000000003DF760] [D0000000000C43A4] .setup_rw_floppy+0x2c0/0xaa8 [floppy]
> [C0000000003DF810] [C000000000044714] .run_timer_softirq+0x174/0x20c
> [C0000000003DF8B0] [C00000000003FC68] .__do_softirq+0x80/0x128
> [C0000000003DF940] [C00000000003FD5C] .do_softirq+0x4c/0x68
> [C0000000003DF9C0] [C00000000001C9E8] .timer_interrupt+0x360/0x388
> [C0000000003DFA90] [C0000000000034B8] decrementer_common+0xb8/0x100
> --- Exception: 901 at .ppc64_runlatch_off+0x0/0x50
> LR = .default_idle+0x48/0x70
> [C0000000003DFD80] [C000000000016764] .default_idle+0x68/0x70 (unreliable)
> [C0000000003DFE00] [C0000000000166E8] .cpu_idle+0x40/0x54
> [C0000000003DFE70] [C0000000000092B0] .rest_init+0x3c/0x54
> [C0000000003DFEF0] [C0000000003B16D4] .start_kernel+0x1f0/0x208
> [C0000000003DFF90] [C000000000008514] .start_here_common+0x88/0x174
> Instruction dump:
> 4e800421 e8410028 48000008 0fe00000 38210070 e8010010 7c0803a6 4e800020
> 7c0802a6 f8010010 f821ff91 e80298d0 <e9230178> 7fa90000 409e000c e92298d8
>
> Am I doing something wrong?
Nope.
I believe this was fixed in Linus' tree as of a couple days ago:
diff-tree b239cbe957ae730caa8af2f169a4d35b8c1bb299 (from
69ed3324983bb937d78a857Author: Stephen Rothwell <sfr@canb.auug.org.au>
Date: Tue Mar 28 14:40:58 2006 +1100
[PATCH] powerpc: make ISA floppies work again
We used to assume that a DMA mapping request with a NULL dev was
for
ISA DMA. This assumption was broken at some point. Now we
explicitly
pass the detected ISA PCI device in the floppy setup.
Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Paul Mackerras <paulus@samba.org>
Maybe you could verify with latest -git, or 2.6.17-rc1 when it's
released?
next prev parent reply other threads:[~2006-03-31 23:17 UTC|newest]
Thread overview: 4+ messages / expand[flat|nested] mbox.gz Atom feed top
2006-03-31 21:38 Oops: mounting floppy disk on PPC64 (power3) Markus Rothe
2006-03-31 22:50 ` Nathan Lynch [this message]
2006-03-31 22:50 ` Nathan Lynch
2006-04-01 7:43 ` Markus Rothe
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20060331225034.GA25663@localdomain \
--to=ntl@pobox.com \
--cc=linux-kernel@vger.kernel.org \
--cc=linuxppc-dev@ozlabs.org \
--cc=markus@unixforces.net \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.