* [patch 1/9] s390: Update default configuration.
@ 2006-04-03 17:21 Martin Schwidefsky
0 siblings, 0 replies; only message in thread
From: Martin Schwidefsky @ 2006-04-03 17:21 UTC (permalink / raw)
To: akpm, linux-kernel
From: Martin Schwidefsky <schwidefsky@de.ibm.com>
[patch 1/9] s390: Update default configuration.
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
---
arch/s390/defconfig | 48 ++++++++++++++++++++++++++++--------------------
1 files changed, 28 insertions(+), 20 deletions(-)
diff -urpN linux-2.6/arch/s390/defconfig linux-2.6-patched/arch/s390/defconfig
--- linux-2.6/arch/s390/defconfig 2006-03-20 06:53:29.000000000 +0100
+++ linux-2.6-patched/arch/s390/defconfig 2006-04-03 18:46:34.000000000 +0200
@@ -1,10 +1,11 @@
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.16-rc2
-# Wed Feb 8 10:44:39 2006
+# Linux kernel version: 2.6.17-rc1
+# Mon Apr 3 14:34:15 2006
#
CONFIG_MMU=y
CONFIG_RWSEM_XCHGADD_ALGORITHM=y
+CONFIG_GENERIC_HWEIGHT=y
CONFIG_GENERIC_CALIBRATE_DELAY=y
CONFIG_S390=y
@@ -30,8 +31,8 @@ CONFIG_AUDIT=y
CONFIG_IKCONFIG=y
CONFIG_IKCONFIG_PROC=y
# CONFIG_CPUSETS is not set
+# CONFIG_RELAY is not set
CONFIG_INITRAMFS_SOURCE=""
-CONFIG_UID16=y
# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
# CONFIG_EMBEDDED is not set
CONFIG_KALLSYMS=y
@@ -45,10 +46,6 @@ CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
CONFIG_EPOLL=y
CONFIG_SHMEM=y
-CONFIG_CC_ALIGN_FUNCTIONS=0
-CONFIG_CC_ALIGN_LABELS=0
-CONFIG_CC_ALIGN_LOOPS=0
-CONFIG_CC_ALIGN_JUMPS=0
CONFIG_SLAB=y
# CONFIG_TINY_SHMEM is not set
CONFIG_BASE_SMALL=0
@@ -60,7 +57,6 @@ CONFIG_BASE_SMALL=0
CONFIG_MODULES=y
CONFIG_MODULE_UNLOAD=y
# CONFIG_MODULE_FORCE_UNLOAD is not set
-CONFIG_OBSOLETE_MODPARM=y
CONFIG_MODVERSIONS=y
# CONFIG_MODULE_SRCVERSION_ALL is not set
CONFIG_KMOD=y
@@ -69,7 +65,7 @@ CONFIG_STOP_MACHINE=y
#
# Block layer
#
-# CONFIG_LBD is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
#
# IO Schedulers
@@ -91,17 +87,20 @@ CONFIG_DEFAULT_IOSCHED="deadline"
#
# Processor type and features
#
-# CONFIG_64BIT is not set
+CONFIG_64BIT=y
CONFIG_SMP=y
CONFIG_NR_CPUS=32
CONFIG_HOTPLUG_CPU=y
-CONFIG_MATHEMU=y
+CONFIG_DEFAULT_MIGRATION_COST=1000000
+CONFIG_COMPAT=y
+CONFIG_SYSVIPC_COMPAT=y
+CONFIG_BINFMT_ELF32=y
#
# Code generation options
#
-CONFIG_MARCH_G5=y
-# CONFIG_MARCH_Z900 is not set
+# CONFIG_MARCH_G5 is not set
+CONFIG_MARCH_Z900=y
# CONFIG_MARCH_Z990 is not set
CONFIG_PACK_STACK=y
# CONFIG_SMALL_STACK is not set
@@ -143,7 +142,7 @@ CONFIG_VIRT_CPU_ACCOUNTING=y
# CONFIG_APPLDATA_BASE is not set
CONFIG_NO_IDLE_HZ=y
CONFIG_NO_IDLE_HZ_INIT=y
-# CONFIG_KEXEC is not set
+CONFIG_KEXEC=y
#
# Networking
@@ -173,6 +172,7 @@ CONFIG_IP_FIB_HASH=y
# CONFIG_INET_AH is not set
# CONFIG_INET_ESP is not set
# CONFIG_INET_IPCOMP is not set
+# CONFIG_INET_XFRM_TUNNEL is not set
# CONFIG_INET_TUNNEL is not set
CONFIG_INET_DIAG=y
CONFIG_INET_TCP_DIAG=y
@@ -180,9 +180,11 @@ CONFIG_INET_TCP_DIAG=y
CONFIG_TCP_CONG_BIC=y
CONFIG_IPV6=y
# CONFIG_IPV6_PRIVACY is not set
+# CONFIG_IPV6_ROUTER_PREF is not set
# CONFIG_INET6_AH is not set
# CONFIG_INET6_ESP is not set
# CONFIG_INET6_IPCOMP is not set
+# CONFIG_INET6_XFRM_TUNNEL is not set
# CONFIG_INET6_TUNNEL is not set
# CONFIG_IPV6_TUNNEL is not set
# CONFIG_NETFILTER is not set
@@ -276,6 +278,11 @@ CONFIG_PREVENT_FIRMWARE_BUILD=y
# CONFIG_DEBUG_DRIVER is not set
#
+# Connector - unified userspace <-> kernelspace linker
+#
+# CONFIG_CONNECTOR is not set
+
+#
# SCSI device support
#
# CONFIG_RAID_ATTRS is not set
@@ -340,8 +347,7 @@ CONFIG_DASD_PROFILE=y
CONFIG_DASD_ECKD=y
CONFIG_DASD_FBA=y
CONFIG_DASD_DIAG=y
-CONFIG_DASD_EER=m
-# CONFIG_DASD_CMB is not set
+CONFIG_DASD_EER=y
# CONFIG_ATA_OVER_ETH is not set
#
@@ -354,6 +360,7 @@ CONFIG_MD_RAID0=m
CONFIG_MD_RAID1=m
# CONFIG_MD_RAID10 is not set
CONFIG_MD_RAID5=m
+# CONFIG_MD_RAID5_RESHAPE is not set
# CONFIG_MD_RAID6 is not set
CONFIG_MD_MULTIPATH=m
# CONFIG_MD_FAULTY is not set
@@ -404,6 +411,7 @@ CONFIG_S390_TAPE_BLOCK=y
# S/390 tape hardware support
#
CONFIG_S390_TAPE_34XX=m
+# CONFIG_S390_TAPE_3590 is not set
# CONFIG_VMLOGRDR is not set
# CONFIG_VMCP is not set
# CONFIG_MONREADER is not set
@@ -529,7 +537,6 @@ CONFIG_SYSFS=y
CONFIG_TMPFS=y
# CONFIG_HUGETLB_PAGE is not set
CONFIG_RAMFS=y
-# CONFIG_RELAYFS_FS is not set
# CONFIG_CONFIGFS_FS is not set
#
@@ -619,14 +626,15 @@ CONFIG_LOG_BUF_SHIFT=17
# CONFIG_DETECT_SOFTLOCKUP is not set
# CONFIG_SCHEDSTATS is not set
# CONFIG_DEBUG_SLAB is not set
-# CONFIG_DEBUG_PREEMPT is not set
+CONFIG_DEBUG_PREEMPT=y
CONFIG_DEBUG_MUTEXES=y
-# CONFIG_DEBUG_SPINLOCK is not set
-# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
+CONFIG_DEBUG_SPINLOCK=y
+CONFIG_DEBUG_SPINLOCK_SLEEP=y
# CONFIG_DEBUG_KOBJECT is not set
# CONFIG_DEBUG_INFO is not set
CONFIG_DEBUG_FS=y
# CONFIG_DEBUG_VM is not set
+# CONFIG_UNWIND_INFO is not set
CONFIG_FORCED_INLINING=y
# CONFIG_RCU_TORTURE_TEST is not set
^ permalink raw reply [flat|nested] only message in thread
only message in thread, other threads:[~2006-04-03 17:21 UTC | newest]
Thread overview: (only message) (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2006-04-03 17:21 [patch 1/9] s390: Update default configuration Martin Schwidefsky
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.